CORIANT-GROOVE-MIB
AI MIB Summary
The CORIANT-GROOVE-MIB provides SNMP management capabilities for the Coriant Groove G30 optical transport platform, enabling monitoring of interface statistics, optical power levels, alarm states, and system resource utilization. This module facilitates the collection of performance data and fault management information specific to the Groove G30 release 2.1.0 hardware and software environment.
SNMP MIB for Groove G30 release 2.1.0
Main OID:
groove.1.3.6.1.4.1.42229.1.2
1686
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
1686 total| Object Name |
|---|
coriant OBJECT IDENTIFIER .1.3.6.1.4.1.42229 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1 |
grooveSNMP MIB for Groove G30 release 2.1.0 MODULE-IDENTITY .1.3.6.1.4.1.42229.1.2 |
fault OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1 |
notificationInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1.1 |
notificationObject OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1.1.1 |
notificationFmEntityThe management object instance which the alarm or condition is reported against.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.1.1.1.1 |
notificationConditionTypeIdentifies the current standing conditions which cause alarms and/or events.ro CoriantFmtypesConditionType .1.3.6.1.4.1.42229.1.2.1.1.1.2 |
notificationLocationIndicates if the alarm or event location is near end or far end.ro CoriantTypesManagementLocation .1.3.6.1.4.1.42229.1.2.1.1.1.3 |
notificationDirectionSpecifies the direction of an event/occurrence in the system, Ingress, Egress, NA.ro CoriantTypesManagementDirection .1.3.6.1.4.1.42229.1.2.1.1.1.4 |
notificationTimePeriodIndicates the time-period increments during which PM data is collected.ro CoriantTypesManagementTimePeriod .1.3.6.1.4.1.42229.1.2.1.1.1.5 |
notificationServiceAffectIndicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.ro CoriantFmtypesServiceAffectFm .1.3.6.1.4.1.42229.1.2.1.1.1.6 |
notificationSeverityLevelIndicates the notification code (severity level) associated with the alarm type of service affecting.ro CoriantFmtypesSeverityLevel .1.3.6.1.4.1.42229.1.2.1.1.1.7 |
notificationOccurrenceDateTimeIndicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.1.1.1.8 |
notificationConditionDescriptionDescribes the condition that caused the alarm.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.1.1.1.9 |
notificationAlarmConditionTypeAlarm condition types, for example, standing or transient.ro Enumeration .1.3.6.1.4.1.42229.1.2.1.1.1.10 |
notificationLastSeverityLevelIndicates the last severity level associated with the alarm type, which provides the info of alarm severity declared and cleared.ro CoriantFmtypesSeverityLevel .1.3.6.1.4.1.42229.1.2.1.1.1.11 |
notificationExtensionDescriptionThe description in alarm notification to provide additional information.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.1.1.1.12 |
notificationFmEntityTypeIndicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.ro CoriantFmtypesEntityTypeFm .1.3.6.1.4.1.42229.1.2.1.1.1.13 |
notificationTrap OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1.2 |
alarmNotification<description> NOTIFICATION-TYPE .1.3.6.1.4.1.42229.1.2.1.2.1 |
notAlarmedEventNotification<description> NOTIFICATION-TYPE .1.3.6.1.4.1.42229.1.2.1.2.2 |
alarmProfile OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1.4 |
alarmProfileTableAlarm profile defines the severity profile of alarm and event. SEQUENCE OF AlarmProfileEntry .1.3.6.1.4.1.42229.1.2.1.4.1 |
alarmProfileEntryEntry of alarmProfileTable AlarmProfileEntry .1.3.6.1.4.1.42229.1.2.1.4.1.1 |
alarmProfileIdalarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.1.4.1.1.1 |
alarmProfileENTR OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1.5 |
alarmProfileENTRTableThe list includes alarm/event entries of an alarm-profile. SEQUENCE OF AlarmProfileENTREntry .1.3.6.1.4.1.42229.1.2.1.5.1 |
alarmProfileENTREntryEntry of alarmProfileENTRTable AlarmProfileENTREntry .1.3.6.1.4.1.42229.1.2.1.5.1.1 |
alarmProfileENTRConditionTypeIdentifies the current standing conditions which cause conditions and/or events.ro CoriantFmtypesConditionType .1.3.6.1.4.1.42229.1.2.1.5.1.1.1 |
alarmProfileENTRFmEntityTypeIndicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.ro CoriantFmtypesEntityTypeFm .1.3.6.1.4.1.42229.1.2.1.5.1.1.2 |
alarmProfileENTRTimePeriodIndicates the time-period increments during which PM data is collected.ro CoriantTypesManagementTimePeriod .1.3.6.1.4.1.42229.1.2.1.5.1.1.3 |
alarmProfileENTRSeverityLevelSaIndicates the notification code (severity level) associated with the condition type of service affecting.ro CoriantFmtypesSeverityLevel .1.3.6.1.4.1.42229.1.2.1.5.1.1.4 |
alarmProfileENTRSeverityLevelNsaIndicates the notification code (severity level) associated with the condition type of non-service affecting.ro CoriantFmtypesSeverityLevel .1.3.6.1.4.1.42229.1.2.1.5.1.1.5 |
standingCondition OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.1.6 |
standingConditionTableThe list includes active standing alarms. SEQUENCE OF StandingConditionEntry .1.3.6.1.4.1.42229.1.2.1.6.1 |
standingConditionEntryEntry of standingConditionTable StandingConditionEntry .1.3.6.1.4.1.42229.1.2.1.6.1.1 |
standingConditionFmEntityThe management object instance which the alarm or condition is reported against.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.1.6.1.1.1 |
standingConditionConditionTypeIdentifies the current standing conditions which cause alarms and/or events.ro CoriantFmtypesConditionType .1.3.6.1.4.1.42229.1.2.1.6.1.1.2 |
standingConditionLocationIndicates if the alarm or event location is near end or far end.ro CoriantTypesManagementLocation .1.3.6.1.4.1.42229.1.2.1.6.1.1.3 |
standingConditionDirectionSpecifies the direction of an event/occurrence in the system, Ingress, Egress, NA.ro CoriantTypesManagementDirection .1.3.6.1.4.1.42229.1.2.1.6.1.1.4 |
standingConditionTimePeriodIndicates the time-period increments during which PM data is collected.ro CoriantTypesManagementTimePeriod .1.3.6.1.4.1.42229.1.2.1.6.1.1.5 |
standingConditionServiceAffectIndicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.ro CoriantFmtypesServiceAffectFm .1.3.6.1.4.1.42229.1.2.1.6.1.1.6 |
standingConditionSeverityLevelIndicates the notification code (severity level) associated with the alarm type of service affecting.ro CoriantFmtypesSeverityLevel .1.3.6.1.4.1.42229.1.2.1.6.1.1.7 |
standingConditionOccurrenceDateTimeIndicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.1.6.1.1.8 |
standingConditionConditionDescriptionDescribes the condition that caused the alarm.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.1.6.1.1.9 |
standingConditionFmEntityTypeIndicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referring to different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2... Separate functions will have different entity types so that profile can be set differently for different service function which is more corresponding to user application.ro CoriantFmtypesEntityTypeFm .1.3.6.1.4.1.42229.1.2.1.6.1.1.10 |
ne OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.2 |
neInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.2.1 |
neIdNetwork Element's system identification code. Note that this is unique identifier for each NE. default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.2.1.1 |
neNameName assigned to this particular NE. A readable name for the NE. It can be used for NE. But not expected to be used by NM for unique NE identification The different function from ne-id is that user can keep ne-id unchanged, which uniquely identifies the NE, and update ne-name if necessary. default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.2.1.2 |
neTypeType of the NE default value :GROOVE_G30ro OCTET STRING .1.3.6.1.4.1.42229.1.2.2.1.3 |
neLocationName of the location of this particular NEro OCTET STRING .1.3.6.1.4.1.42229.1.2.2.1.4 |
neSiteName or CLLI of the site where this NE is locatedro OCTET STRING .1.3.6.1.4.1.42229.1.2.2.1.5 |
neAltitudeThe altitude of the Network Element in meters UNITS:metersro INTEGER .1.3.6.1.4.1.42229.1.2.2.1.6 |
neVendorVendor name of this NE default value :Coriantro OCTET STRING .1.3.6.1.4.1.42229.1.2.2.1.7 |
neTemperatureAmbient temperature sensed by the primary shelf for NE levelro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.2.1.8 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.2.2 |
systemUnknownPluggableReportThe attribute will enable/disable the alarm reporting for unknown pluggables present on the NE. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.2.2.1 |
systemPowerConsumptionCurrentCurrent power consumption of the system.ro CoriantTypesPower .1.3.6.1.4.1.42229.1.2.2.2.2 |
systemPowerConsumptionEstimatedMaxDerived maximal power consumption around room temperature.ro CoriantTypesPower .1.3.6.1.4.1.42229.1.2.2.2.3 |
systemFactoryResetButtonThe attribute will enable/disable factory reset button function on the NE. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.2.2.4 |
console OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.2.3 |
consoleBaudRateThe baud rate of console port default value :9600ro Enumeration .1.3.6.1.4.1.42229.1.2.2.3.1 |
equipment OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3 |
shelf OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.1 |
shelfTableNULL SEQUENCE OF ShelfEntry .1.3.6.1.4.1.42229.1.2.3.1.1 |
shelfEntryEntry of shelfTable ShelfEntry .1.3.6.1.4.1.42229.1.2.3.1.1.1 |
shelfIdIdentifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf.ro CoriantTypesShelfId .1.3.6.1.4.1.42229.1.2.3.1.1.1.1 |
shelfLocationName of the location of this particular shelf.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.1.1.1.2 |
shelfInletTemperatureshelf inlet temperaturero CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.1.1.1.3 |
shelfOutletTemperatureshelf outlet temperaturero CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.1.1.1.4 |
shelfAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.1.1.1.5 |
shelfOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.1.1.1.6 |
shelfAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.1.1.1.7 |
shelfAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.1.1.1.8 |
slot OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.2 |
slotTableNULL SEQUENCE OF SlotEntry .1.3.6.1.4.1.42229.1.2.3.2.1 |
slotEntryEntry of slotTable SlotEntry .1.3.6.1.4.1.42229.1.2.3.2.1.1 |
slotIdIdentifier of the slot. It shall be an integer number and assigned implicitly by the system.ro CoriantTypesSlotId .1.3.6.1.4.1.42229.1.2.3.2.1.1.1 |
slotActualCardTypeEquipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :emptyro CoriantTypesEquipmentType .1.3.6.1.4.1.42229.1.2.3.2.1.1.2 |
slotPossibleCardTypesDefined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.2.1.1.3 |
slotAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.2.1.1.4 |
slotOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.2.1.1.5 |
slotAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.2.1.1.6 |
slotAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.2.1.1.7 |
card OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.3 |
cardTableCard is a container carried by a slot. SEQUENCE OF CardEntry .1.3.6.1.4.1.42229.1.2.3.3.1 |
cardEntryEntry of cardTable CardEntry .1.3.6.1.4.1.42229.1.2.3.3.1.1 |
cardRequiredTypeThe attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.ro CoriantTypesCardType .1.3.6.1.4.1.42229.1.2.3.3.1.1.1 |
cardEquipmentNameThe attribute indicates an additional field to identify the module.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.3.1.1.2 |
cardAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.3.1.1.3 |
cardOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.3.1.1.4 |
cardAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknownro Bits .1.3.6.1.4.1.42229.1.2.3.3.1.1.5 |
cardAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.3.1.1.6 |
cardFanSpeedRateThe fan speed of percentage. Conditions:../required-type = 'FAN'ro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.3.3.1.1.7 |
cardSwitchingTypeThe traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') default value :otnro Enumeration .1.3.6.1.4.1.42229.1.2.3.3.1.1.8 |
cardTemperatureTemperature at the monitoring point.ro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.3.1.1.9 |
cardModeSpecify the card mode, e.g. normal or regen. default value :normalro Enumeration .1.3.6.1.4.1.42229.1.2.3.3.1.1.10 |
subslot OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.4 |
subslotTableNULL SEQUENCE OF SubslotEntry .1.3.6.1.4.1.42229.1.2.3.4.1 |
subslotEntryEntry of subslotTable SubslotEntry .1.3.6.1.4.1.42229.1.2.3.4.1.1 |
subslotIdIdentifier of the subslot.ro CoriantTypesSlotId .1.3.6.1.4.1.42229.1.2.3.4.1.1.1 |
subslotActualCardTypeEquipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :emptyro CoriantTypesEquipmentType .1.3.6.1.4.1.42229.1.2.3.4.1.1.2 |
subslotPossibleCardTypesDefined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.4.1.1.3 |
subslotAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.4.1.1.4 |
subslotOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.4.1.1.5 |
subslotAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.4.1.1.6 |
subslotAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.4.1.1.7 |
subcard OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.5 |
subcardTableSubcard is a container carried by a subslot. SEQUENCE OF SubcardEntry .1.3.6.1.4.1.42229.1.2.3.5.1 |
subcardEntryEntry of subcardTable SubcardEntry .1.3.6.1.4.1.42229.1.2.3.5.1.1 |
subcardRequiredTypeThe attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.ro CoriantTypesCardType .1.3.6.1.4.1.42229.1.2.3.5.1.1.1 |
subcardEquipmentNameThe attribute indicates an additional field to identify the module.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.5.1.1.2 |
subcardAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.5.1.1.3 |
subcardOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.5.1.1.4 |
subcardAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknownro Bits .1.3.6.1.4.1.42229.1.2.3.5.1.1.5 |
subcardAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.5.1.1.6 |
subcardTemperatureTemperature at the monitoring point.ro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.5.1.1.7 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.6 |
portTableNULL SEQUENCE OF PortEntry .1.3.6.1.4.1.42229.1.2.3.6.1 |
portEntryEntry of portTable PortEntry .1.3.6.1.4.1.42229.1.2.3.6.1.1 |
portIdThe identifier is defined to uniquely identify the port.ro CoriantTypesPortId .1.3.6.1.4.1.42229.1.2.3.6.1.1.1 |
portPossiblePluggableTypesDefined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some leafs. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon')ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.6.1.1.2 |
portActualPluggableTypePluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:../port-type != 'optical' default value :emptyro CoriantTypesEquipmentType .1.3.6.1.4.1.42229.1.2.3.6.1.1.3 |
portRxOpticalPowerReceived optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.4 |
portTxOpticalPowerTransmitted optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.5 |
portRxOpticalPowerSelectedChannelOptical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.6 |
portRxOpticalPowerLane1Received optical power of lane 1.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.7 |
portRxOpticalPowerLane2Received optical power of lane 2.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.8 |
portRxOpticalPowerLane3Received optical power of lane 3.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.9 |
portRxOpticalPowerLane4Received optical power of lane 4.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.10 |
portTxOpticalPowerLane1Transmitted optical power lane 1.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.11 |
portTxOpticalPowerLane2Transmitted optical power lane 2.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.12 |
portTxOpticalPowerLane3Transmitted optical power lane 3.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.13 |
portTxOpticalPowerLane4Transmitted optical power lane 4.ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.6.1.1.14 |
portDirectionTypeSupported direction of the optical port.ro CoriantTypesTypeOfDirection .1.3.6.1.4.1.42229.1.2.3.6.1.1.15 |
portNameThe name of the port. default value :unspecifiedro CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.3.6.1.1.16 |
portTypeThe type of port. Needs to be provided upon Port creationro Enumeration .1.3.6.1.4.1.42229.1.2.3.6.1.1.17 |
portModeThe working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicablero CoriantTypesPortMode .1.3.6.1.4.1.42229.1.2.3.6.1.1.18 |
portAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.6.1.1.19 |
portOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.6.1.1.20 |
portAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.6.1.1.21 |
portAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.6.1.1.22 |
portServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.6.1.1.23 |
portConnectedToIndicate neighbour port/facility entity to which the current port/facility is connected to.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.6.1.1.24 |
portArcConfigThe configurable mode of the Alarm Report Control (ARC). default value :nalm-qiro Enumeration .1.3.6.1.4.1.42229.1.2.3.6.1.1.25 |
portArcStateThe current mode of the Alarm Report Control (ARC).ro Enumeration .1.3.6.1.4.1.42229.1.2.3.6.1.1.26 |
portArcSubStateAdditional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nrro Enumeration .1.3.6.1.4.1.42229.1.2.3.6.1.1.27 |
portArcTimerThe holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440ro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.6.1.1.28 |
portArcRemainingTimeThe remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.6.1.1.29 |
portExternalConnectivityIndicates the port is connected externally or not. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.3.6.1.1.30 |
subport OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.7 |
subportTableNULL SEQUENCE OF SubportEntry .1.3.6.1.4.1.42229.1.2.3.7.1 |
subportEntryEntry of subportTable SubportEntry .1.3.6.1.4.1.42229.1.2.3.7.1.1 |
subportIdThe identifier is defined to uniquely identify the subport.ro CoriantTypesPortId .1.3.6.1.4.1.42229.1.2.3.7.1.1.1 |
subportPortNameThe name of the port. default value :unspecifiedro CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.3.7.1.1.2 |
subportPortTypeThe type of port. Needs to be provided upon Port creationro Enumeration .1.3.6.1.4.1.42229.1.2.3.7.1.1.3 |
subportPortModeThe working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable; applicable to subport 1 to 4; possible values are: 10GBE, not-applicable. Default is not-applicable. For Line side: CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G. Default is 16QAM_200G. non applicable : there shall not be service created on the port or subport subport: the port shall create four subports under the port to support 4x10G. 40GBE: 40GBE service shall be created on the port with default mapping GMP. 10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff. 100GBE: 100GBE service shall be created on the subport with default mapping GMP. QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port. 16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port. 8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports. Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service. Restrictions: Changing Port mode shall be allowed only if the impacted port or subport object is administratively down. Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'. If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied. If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port. When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal. Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') default value :not-applicablero CoriantTypesPortMode .1.3.6.1.4.1.42229.1.2.3.7.1.1.4 |
subportAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.7.1.1.5 |
subportOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.7.1.1.6 |
subportAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.7.1.1.7 |
subportAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.7.1.1.8 |
subportServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.7.1.1.9 |
subportConnectedToIndicate neighbour port/facility entity to which the current port/facility is connected to.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.7.1.1.10 |
subportArcConfigThe configurable mode of the Alarm Report Control (ARC). default value :nalm-qiro Enumeration .1.3.6.1.4.1.42229.1.2.3.7.1.1.11 |
subportArcStateThe current mode of the Alarm Report Control (ARC).ro Enumeration .1.3.6.1.4.1.42229.1.2.3.7.1.1.12 |
subportArcSubStateAdditional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nrro Enumeration .1.3.6.1.4.1.42229.1.2.3.7.1.1.13 |
subportArcTimerThe holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440ro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.7.1.1.14 |
subportArcRemainingTimeThe remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.7.1.1.15 |
subportRxOpticalPowerReceived optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.7.1.1.16 |
subportTxOpticalPowerTransmitted optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.7.1.1.17 |
subportExternalConnectivityIndicates the port is connected externally or not. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.3.7.1.1.18 |
pluggable OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.8 |
pluggableTableRepresents the Pluggable object SEQUENCE OF PluggableEntry .1.3.6.1.4.1.42229.1.2.3.8.1 |
pluggableEntryEntry of pluggableTable PluggableEntry .1.3.6.1.4.1.42229.1.2.3.8.1.1 |
pluggableRequiredTypeThe attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.ro CoriantTypesPluggableType .1.3.6.1.4.1.42229.1.2.3.8.1.1.1 |
pluggableFormFactorIndicating the exact form factor of the pluggable. default value :Unrecognizedro CoriantTypesPluggableFormFactor .1.3.6.1.4.1.42229.1.2.3.8.1.1.2 |
pluggableInterfaceTypeIndicating interface type of the pluggable. default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.3 |
pluggableLaserSourceThe type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:../required-type = 'CFP2' default value :not-availablero Enumeration .1.3.6.1.4.1.42229.1.2.3.8.1.1.4 |
pluggableHwVersionThe attribute Identifies the Hardware Version of the module that populates the slot.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.5 |
pluggableVendorVendor information.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.6 |
pluggableSerialNumberThis is the value of serial number stored in EEPROM of the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.7 |
pluggableFwVersionCurrent Firmware (FW) version on the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.8 |
pluggablePartNumberIdentifies the Part Number of the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.9 |
pluggableCleiIdentifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.10 |
pluggableEquipmentNameThe attribute indicates an additional field to identify the module.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.11 |
pluggableAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.8.1.1.12 |
pluggableOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.8.1.1.13 |
pluggableAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource. default value :unknownro Bits .1.3.6.1.4.1.42229.1.2.3.8.1.1.14 |
pluggableAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.8.1.1.15 |
pluggableTemperatureTemperature at the monitoring point.ro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.8.1.1.16 |
amplifier OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.9 |
amplifierTableThe list of optical amplifier on an equipment. SEQUENCE OF AmplifierEntry .1.3.6.1.4.1.42229.1.2.3.9.1 |
amplifierEntryEntry of amplifierTable AmplifierEntry .1.3.6.1.4.1.42229.1.2.3.9.1.1 |
amplifierNameUser-defined name assigned to identify a specific amplifier in the devicero CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.3.9.1.1.1 |
amplifierSupportingInputPortIdentifier of the supporting input port.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.3.9.1.1.2 |
amplifierSupportingOutputPortIdentifier of the supporting output port.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.3.9.1.1.3 |
amplifierAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.9.1.1.4 |
amplifierOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.9.1.1.5 |
amplifierAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.9.1.1.6 |
amplifierAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.9.1.1.7 |
amplifierEnableConfiguration for enable or disable the amplifier. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.3.9.1.1.8 |
amplifierInputLosShutdownEnable or disable the function of automatic shutdown per input LOS. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.3.9.1.1.9 |
amplifierControlModeControl mode of the amplifier. default value :autoro Enumeration .1.3.6.1.4.1.42229.1.2.3.9.1.1.10 |
amplifierModeThe operating mode of the amplifier default value :constant-gainro Enumeration .1.3.6.1.4.1.42229.1.2.3.9.1.1.11 |
amplifierTypeType of the amplifier. default value :variable-gain-EDFAro Enumeration .1.3.6.1.4.1.42229.1.2.3.9.1.1.12 |
amplifierTargetGainSetting gain to the amplifier for constant-gain mode in manual control mode.ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.3.9.1.1.13 |
amplifierOperatingGainOperating gain of the amplifier, which is the actually configured gain on the amplifier.ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.3.9.1.1.14 |
amplifierGainAdjustmentThe value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. default value :0.0ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.3.9.1.1.15 |
amplifierGainRangeMinThe minimum of settable gain.ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.3.9.1.1.16 |
amplifierGainRangeMaxThe maximum of settable gain. UNITS:dBro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.9.1.1.17 |
amplifierOutputPowerMonMonitored aggregation signal output power. UNITS:dBmro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.9.1.1.18 |
amplifierOutputPowerMonWithAseMonitored aggregation total output power including both signal and ASE. UNITS:dBmro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.9.1.1.19 |
amplifierInputPowerMonMonitored aggregation input power. UNITS:dBmro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.9.1.1.20 |
amplifierOutputVoaConfigurable optical attenuation at output of the amplifier. default value :0.0ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.3.9.1.1.21 |
amplifierPowerBeforeOutputVoaMonitored optical power after output VOA. UNITS:dBmro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.9.1.1.22 |
tdc OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.10 |
tdcTableThe list of optical tdc on an equipment. SEQUENCE OF TdcEntry .1.3.6.1.4.1.42229.1.2.3.10.1 |
tdcEntryEntry of tdcTable TdcEntry .1.3.6.1.4.1.42229.1.2.3.10.1.1 |
tdcNameUser-defined name assigned to identify a specific tdc in the devicero CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.3.10.1.1.1 |
tdcSupportingInputPortIdentifier of the supporting input port.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.3.10.1.1.2 |
tdcSupportingOutputPortIdentifier of the supporting output port.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.3.10.1.1.3 |
tdcAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.10.1.1.4 |
tdcOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.10.1.1.5 |
tdcAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.10.1.1.6 |
tdcAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.10.1.1.7 |
tdcModeControl mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD value per measured chromatic dispersion in the span. default value :autoro Enumeration .1.3.6.1.4.1.42229.1.2.3.10.1.1.8 |
tdcReferenceFrequencyIndicating the reference wavelength of the TDC. UNITS:MHzro CoriantTypesFreq .1.3.6.1.4.1.42229.1.2.3.10.1.1.9 |
tdcActualReferenceFrequencyIndicating the actual reference wavelength of the TDC. UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.10.1.1.10 |
tdcFrequencyRangeMinThe minimum of supported wavelength. UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.10.1.1.11 |
tdcFrequencyRangeMaxThe maximum of supported wavelength. UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.10.1.1.12 |
tdcChromaticDispersionThe setting value of Chromatic Dispersion. UNITS:ps/nm default value :0ro INTEGER .1.3.6.1.4.1.42229.1.2.3.10.1.1.13 |
tdcChromaticDispersionAdjustmentThe value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nmro INTEGER .1.3.6.1.4.1.42229.1.2.3.10.1.1.14 |
tdcActualChromaticDispersionThe actual value of Chromatic Dispersion. UNITS:ps/nmro INTEGER .1.3.6.1.4.1.42229.1.2.3.10.1.1.15 |
tdcCdRangeMinThe minimum of supported chromatic dispersion. UNITS:ps/nmro INTEGER .1.3.6.1.4.1.42229.1.2.3.10.1.1.16 |
tdcCdRangeMaxThe maximum of supported chromatic dispersion. UNITS:ps/nmro INTEGER .1.3.6.1.4.1.42229.1.2.3.10.1.1.17 |
inventory OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.12 |
inventoryTableNULL SEQUENCE OF InventoryEntry .1.3.6.1.4.1.42229.1.2.3.12.1 |
inventoryEntryEntry of inventoryTable InventoryEntry .1.3.6.1.4.1.42229.1.2.3.12.1.1 |
inventoryEquipmentTypeThe equipment type that the inventory data refers toro Enumeration .1.3.6.1.4.1.42229.1.2.3.12.1.1.1 |
inventoryShelfIdIdentifier of the shelf.ro CoriantTypesShelfId .1.3.6.1.4.1.42229.1.2.3.12.1.1.2 |
inventorySlotIdIdentifier of the slot.ro CoriantTypesSlotId .1.3.6.1.4.1.42229.1.2.3.12.1.1.3 |
inventorySubslotIdIdentifier of the subslot.ro CoriantTypesSlotId .1.3.6.1.4.1.42229.1.2.3.12.1.1.4 |
inventoryPortIdIdentifier of the port.ro CoriantTypesPortId .1.3.6.1.4.1.42229.1.2.3.12.1.1.5 |
inventoryEquipmentVersionThe attribute Identifies the Hardware Version of the module that populates the slot.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.6 |
inventoryModuleTypeThis is the value of module type stored in EEPROM of the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.7 |
inventoryVendorVendor information.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.8 |
inventorySerialNumberThis is the value of serial number stored in EEPROM of the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.9 |
inventoryFwVersionCurrent Firmware (FW) version on the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.10 |
inventoryPartNumberIdentifies the Part Number of the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.11 |
inventoryCleiIdentifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages. CLEI codes have 4 data elements: - Characters 1 to 4: Define family or subfamily of product. - Characters 5 to 7: Define features. - Character 8: Manufacturer and System ID. - Characters 9 and 10: Identifies version, issue, and release #.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.12 |
inventoryInterfaceTypeIndicating interface type of the pluggable. default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.13 |
inventoryManufactureDateThe equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(../equipment-type = 'shelf') or (../equipment-type = 'card') or (../equipment-type = 'subcard') or (../equipment-type = 'pluggable') default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.14 |
inventoryManufacturerNumberThis is the value of manufacturer number stored in EEPROM of the equipment.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.12.1.1.16 |
led OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.14 |
ledTableAttributes related with LED Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI. SEQUENCE OF LedEntry .1.3.6.1.4.1.42229.1.2.3.14.1 |
ledEntryEntry of ledTable LedEntry .1.3.6.1.4.1.42229.1.2.3.14.1.1 |
ledEquipmentTypeThe attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHELF, FANro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.14.1.1.1 |
ledShelfIdIdentifier of the shelf.ro CoriantTypesShelfId .1.3.6.1.4.1.42229.1.2.3.14.1.1.2 |
ledSlotIdIdentifier of the slot.ro CoriantTypesSlotId .1.3.6.1.4.1.42229.1.2.3.14.1.1.3 |
ledNameThe functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslot(n)_ledro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.14.1.1.4 |
ledStatusCurrent LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailablero Enumeration .1.3.6.1.4.1.42229.1.2.3.14.1.1.5 |
ledSubslotIdIdentifier of the subslot.ro CoriantTypesSubslotId .1.3.6.1.4.1.42229.1.2.3.14.1.1.6 |
temperatureDetails OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.15 |
temperatureDetailsTableThe detailed information of temperature in each monitoring-point of current module SEQUENCE OF TemperatureDetailsEntry .1.3.6.1.4.1.42229.1.2.3.15.1 |
temperatureDetailsEntryEntry of temperatureDetailsTable TemperatureDetailsEntry .1.3.6.1.4.1.42229.1.2.3.15.1.1 |
temperatureDetailsMonitoringPointThe point of temperature monitoring. It could be the sensor or chip internal.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.15.1.1.1 |
temperatureDetailsTemperatureTemperature at the monitoring point.ro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.15.1.1.2 |
temperatureDetailsTemperatureRangeLowThe lowest temperature threshold of this monitoring point in working mode.ro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.15.1.1.3 |
temperatureDetailsTemperatureRangeHighThe highest temperature threshold of this monitoring point in working mode.ro CoriantTypesTemperature .1.3.6.1.4.1.42229.1.2.3.15.1.1.4 |
otdr OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.16 |
otdrTableContainer of OTDR. SEQUENCE OF OtdrEntry .1.3.6.1.4.1.42229.1.2.3.16.1 |
otdrEntryEntry of otdrTable OtdrEntry .1.3.6.1.4.1.42229.1.2.3.16.1.1 |
otdrStateIndicating the current status of the OTDR. default value :not-availablero Enumeration .1.3.6.1.4.1.42229.1.2.3.16.1.1.1 |
otdrMeasurementTimeIndicating the time remaining in current measurement running. UNITS:second default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.16.1.1.2 |
otdrErrorError message produced when the measurement ends with error.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.16.1.1.3 |
otdrLaserStatusIndicating the current status of the OTDR laser. default value :not-availablero Enumeration .1.3.6.1.4.1.42229.1.2.3.16.1.1.4 |
otdrMeasurementPort0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.16.1.1.5 |
otdrPort OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.18 |
otdrPortTableContaining attributes of OTDR port. SEQUENCE OF OtdrPortEntry .1.3.6.1.4.1.42229.1.2.3.18.1 |
otdrPortEntryEntry of otdrPortTable OtdrPortEntry .1.3.6.1.4.1.42229.1.2.3.18.1.1 |
otdrPortOtdrRangeOTDR measurement range. UNITS:km default value :autoro OtdrOtdrRange .1.3.6.1.4.1.42229.1.2.3.18.1.1.1 |
otdrPortOtdrPulseWidthIndicates pulse width to be used in otdr measurement. UNITS:nano-second default value :autoro OtdrOtdrPulseWidth .1.3.6.1.4.1.42229.1.2.3.18.1.1.2 |
otdrPortOtdrMeasurementSpeedIndicating OTDR measurement speed. default value :autoro Enumeration .1.3.6.1.4.1.42229.1.2.3.18.1.1.3 |
otdrPortOtdrIorSpecifies the group index of refraction (IOR) of the fiber to be measured. default value :autoro OtdrOtdrIor .1.3.6.1.4.1.42229.1.2.3.18.1.1.4 |
otdrPortOtdrFiberTypeIndicating fiber type to be measured. default value :autoro Enumeration .1.3.6.1.4.1.42229.1.2.3.18.1.1.5 |
otdrPortOtdrLastMeasurementIndicates the last otdr measurement date and time on the port. default value :0000-00-00T00:00:00Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.3.18.1.1.6 |
otdrPortOtdrResolutionSpecifies the OTDR data sampling resolution. UNITS:meter default value :autoro OCTET STRING .1.3.6.1.4.1.42229.1.2.3.18.1.1.7 |
ops OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.20 |
opsTableThe list of optical protection switch (ops) on an equipment. SEQUENCE OF OpsEntry .1.3.6.1.4.1.42229.1.2.3.20.1 |
opsEntryEntry of opsTable OpsEntry .1.3.6.1.4.1.42229.1.2.3.20.1.1 |
opsNameThe name assigned to identify a specific ops in the devicero CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.3.20.1.1.1 |
opsWorkingEntityIdentifier of the working port of the OPS.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.3.20.1.1.2 |
opsProtectionEntityIdentifier of the protection port of the OPSro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.3.20.1.1.3 |
opsAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.20.1.1.4 |
opsOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.3.20.1.1.5 |
opsAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.3.20.1.1.6 |
opsAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.3.20.1.1.7 |
opsProtectionStatusIndicates the status of the protection switch.ro Enumeration .1.3.6.1.4.1.42229.1.2.3.20.1.1.8 |
opsActivePathIndicating the active port of the protection switch. default value :unknownro Enumeration .1.3.6.1.4.1.42229.1.2.3.20.1.1.9 |
opsRevertiveRevertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.3.20.1.1.10 |
opsWaitToRestoreWait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a norequest state is transmitted. UNITS:second default value :300ro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.20.1.1.11 |
opsWorkingSwitchThresholdThe switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.20.1.1.12 |
opsProtectionSwitchThresholdThe switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.20.1.1.13 |
opsWorkingLosThresholdThe switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.20.1.1.14 |
opsProtectionLosThresholdThe switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.3.20.1.1.15 |
opsHoldoffTimerThe hold off time of the protection switch. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.3.20.1.1.16 |
opsWavelengthBandSpecifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550ro Enumeration .1.3.6.1.4.1.42229.1.2.3.20.1.1.17 |
subportStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.25 |
subportStatisticsTableNULL SEQUENCE OF SubportStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.25.1 |
subportStatisticsEntryEntry of subportStatisticsTable SubportStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.25.1.1 |
subportStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.3.25.1.1.1 |
portStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.26 |
portStatisticsTableNULL SEQUENCE OF PortStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.26.1 |
portStatisticsEntryEntry of portStatisticsTable PortStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.26.1.1 |
portStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.3.26.1.1.1 |
subcardStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.27 |
subcardStatisticsTableNULL SEQUENCE OF SubcardStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.27.1 |
subcardStatisticsEntryEntry of subcardStatisticsTable SubcardStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.27.1.1 |
subcardStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.3.27.1.1.1 |
cardStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.28 |
cardStatisticsTableNULL SEQUENCE OF CardStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.28.1 |
cardStatisticsEntryEntry of cardStatisticsTable CardStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.28.1.1 |
cardStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.3.28.1.1.1 |
shelfStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.3.29 |
shelfStatisticsTableNULL SEQUENCE OF ShelfStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.29.1 |
shelfStatisticsEntryEntry of shelfStatisticsTable ShelfStatisticsEntry .1.3.6.1.4.1.42229.1.2.3.29.1.1 |
shelfStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.3.29.1.1.1 |
services OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4 |
otn OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1 |
eth10g OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.1 |
eth10gTableRepresents the 10GBE object. SEQUENCE OF Eth10gEntry .1.3.6.1.4.1.42229.1.2.4.1.1.1 |
eth10gEntryEntry of eth10gTable Eth10gEntry .1.3.6.1.4.1.42229.1.2.4.1.1.1.1 |
eth10gEthFecTypeThe FEC working type of etyn port. default value :autoro CoriantTypesEthFec .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.1 |
eth10gEthFecTypeStateThe FEC working state of etyn port. default value :disabledro CoriantTypesEthFec .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.2 |
eth10gTransmitInterpacketgapSpecifies the minimum transmit IPG value. default value :8ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.3 |
eth10gGfpPayloadFcsEnabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.4 |
eth10gMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.5 |
eth10gAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6 |
eth10gOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.7 |
eth10gAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.8 |
eth10gAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.9 |
eth10gClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.10 |
eth10gClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.11 |
eth10gNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.12 |
eth10gAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.13 |
eth10gLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.14 |
eth10gLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.15 |
eth10gTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.16 |
eth10gTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.17 |
eth10gServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.18 |
eth10gLldpStatusIfPort level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabledro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.19 |
eth10gUpiValueThe value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.20 |
eth10gHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.21 |
testSignalFacilityStatus OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.2 |
testSignalFacilityStatusTableTest signal status for current facility. SEQUENCE OF TestSignalFacilityStatusEntry .1.3.6.1.4.1.42229.1.2.4.1.2.1 |
testSignalFacilityStatusEntryEntry of testSignalFacilityStatusTable TestSignalFacilityStatusEntry .1.3.6.1.4.1.42229.1.2.4.1.2.1.1 |
testSignalFacilityStatusPrbsSyncThe test result of PRBS Synchronization default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.2.1.1.1 |
testSignalFacilityStatusTestTimeDurationThe time duration of signal test UNITS:secondsro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.2.1.1.2 |
testSignalFacilityStatusPrbsBitErrorCountThe counting of bit error by PRBS Synchronizationro IetfYangTypesGauge64 .1.3.6.1.4.1.42229.1.2.4.1.2.1.1.3 |
lldpRemoteSystem OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.3 |
lldpRemoteSystemTableList of LLDP neighbors. SEQUENCE OF LldpRemoteSystemEntry .1.3.6.1.4.1.42229.1.2.4.1.3.1 |
lldpRemoteSystemEntryEntry of lldpRemoteSystemTable LldpRemoteSystemEntry .1.3.6.1.4.1.42229.1.2.4.1.3.1.1 |
lldpRemoteSystemLldpRemoteIndexThis attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.1 |
lldpRemoteSystemRemoteChassisIdSubtypeThis attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value.ro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.2 |
lldpRemoteSystemRemoteChassisIdThis attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.3 |
lldpRemoteSystemRemotePortIdSubtypeThis attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.ro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.4 |
lldpRemoteSystemRemotePortIdThis attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies an agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.5 |
lldpRemoteSystemRemotePortDescThe string value used to identify the description of the given port associated with the remote system.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.6 |
lldpRemoteSystemRemoteSysNameThe string value used to identify the system name of the remote system. sys-name: system namero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.7 |
lldpRemoteSystemRemoteSysDescThe string value used to identify the system description of the remote system. sys-desc: system descriptionro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.8 |
lldpRemoteSystemRemoteSysCapSupportedThis attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality. sys-cap-supported: supported system capabilityro LldpLldpSysCap .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.9 |
lldpRemoteSystemRemoteSysCapEnabledThis attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'bridge(2)' indicates that the system has bridge capability. The bit 'wlanAccessPoint(3)' indicates that the system has WLAN access point capability. The bit 'router(4)' indicates that the system has router capability. The bit 'telephone(5)' indicates that the system has telephone capability. The bit 'docsisCableDevice(6)' indicates that the system has DOCSIS Cable Device capability (IETF RFC 2669 & 2670). The bit 'stationOnly(7)' indicates that the system has only station capability and nothing else. The bit 'cVLANComponent(8)' indicates that the system has C-VLAN component functionality. The bit 'sVLANComponent(9)' indicates that the system has S-VLAN component functionality. The bit 'twoPortMACRelay(10)' indicates that the system has Two-port MAC Relay (TPMR) functionality.ro LldpLldpSysCap .1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10 |
remoteManAddresses OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.4 |
remoteManAddressesTableList of management addresses of LLDP neighbor. man:managment, remote management addresses SEQUENCE OF RemoteManAddressesEntry .1.3.6.1.4.1.42229.1.2.4.1.4.1 |
remoteManAddressesEntryEntry of remoteManAddressesTable RemoteManAddressesEntry .1.3.6.1.4.1.42229.1.2.4.1.4.1.1 |
remoteManAddressesRemoteManAddrSubtypeThe type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.4.1.1.1 |
remoteManAddressesRemoteManAddrThe string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity. man: management addr: addressro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.4.1.1.2 |
remoteManAddressesRemoteManAddrIfSubtypeThis attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention. man: management addr: addressro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.4.1.1.3 |
remoteManAddressesRemoteManAddrIfIdThe integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: addressro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.4.1.1.4 |
remoteManAddressesRemoteManAddrOidThe OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. man: management addr: address oid: object identifierro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.4.1.1.5 |
odu OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.5 |
oduTableNULL SEQUENCE OF OduEntry .1.3.6.1.4.1.42229.1.2.4.1.5.1 |
oduEntryEntry of oduTable OduEntry .1.3.6.1.4.1.42229.1.2.4.1.5.1.1 |
odutypeL1Level 1 ODU typero CoriantTypesOduType .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.1 |
oduidL1Identifier of level 1 ODUro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.2 |
odutypeL2Level 2 ODU typero CoriantTypesOduType .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.3 |
oduidL2Identifier of level 2 ODUro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.4 |
odutypeL3Level 3 ODU typero CoriantTypesOduType .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.5 |
oduidL3Identifier of level 3 ODUro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.6 |
odutypeL4Level 4 ODU typero CoriantTypesOduType .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.7 |
oduidL4Identifier of level 4 ODUro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.8 |
oduAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.9 |
oduOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.10 |
oduAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.11 |
oduAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.12 |
oduServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.13 |
oduTribSlotTributary slots of ODU, range 1 to 80ro CoriantTypesNumberList .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.14 |
oduRxPayloadTypeReceived payload-type of ODUro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.15 |
oduTxPayloadTypeTransmitter payload-type of ODUro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.16 |
oduNimEnableThe enable switching of nim function default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.17 |
oduDelayMeasurementEnableThe enable switching of delay-measurement function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.18 |
oduOpuConfigActualThe actual opu configuration type default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.19 |
oduClientSignalTypeThe ODUflex rate for special signal type default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.20 |
oduExpSapiThe expected sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.21 |
oduExpDapiThe expected dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.22 |
oduExpOperatorThe expected operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.23 |
oduTxSapiThe transmitter sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.24 |
oduTxDapiThe transmitter dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.25 |
oduTxOperatorThe transmitter operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.26 |
oduTimDefectModeThe tim defect selection mode default value :NONEro CoriantTypesTimMode .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.27 |
oduTimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.28 |
oduRxSapiThe received sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.29 |
oduRxDapiThe received dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30 |
oduRxOperatorThe received operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.31 |
oduDegradeIntervalThe consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.32 |
oduDegradeThresholdThe threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.33 |
oduTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.34 |
oduTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.35 |
oduTerminationModeTermination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminatedro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.36 |
oduEncryption OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.6 |
oduEncryptionTableEncryption function for the ODU channel. SEQUENCE OF OduEncryptionEntry .1.3.6.1.4.1.42229.1.2.4.1.6.1 |
oduEncryptionEntryEntry of oduEncryptionTable OduEncryptionEntry .1.3.6.1.4.1.42229.1.2.4.1.6.1.1 |
oduEncryptionEncryptionEnableSetting AES-256 encryption on OTN default value :disabledro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.1 |
oduEncryptionBlockCipherModeSpecifies the block cipher mode of operation. default value :CTRro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.2 |
oduEncryptionEncryptionIntervalThe encryption key rotation interval (in minutes) UNITS:minutes default value :30ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.3 |
oduEncryptionEncryptionTxStatusThe encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions.ro CoriantCommonOtnEncryStatusEnum .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.4 |
oduEncryptionEncryptionRxStatusThe encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions.ro CoriantCommonOtnEncryStatusEnum .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.5 |
oduEncryptionOduKeySyncSessionIndicate the associated session for the ODU channel to synchronize keys. default value :nonero CoriantCommonOtnKeySyncSession .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.6 |
oduEncryptionEncryptionTxChannelIdSpecify channel identifier of the encrypted ODU, which shall be unique within the NE.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.7 |
oduEncryptionTimeToNextKeyThe time left to rotate the ODU encryption key. UNITS:seconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.6.1.1.8 |
testSignalStatus OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.7 |
testSignalStatusTableTest signal status on ODU SEQUENCE OF TestSignalStatusEntry .1.3.6.1.4.1.42229.1.2.4.1.7.1 |
testSignalStatusEntryEntry of testSignalStatusTable TestSignalStatusEntry .1.3.6.1.4.1.42229.1.2.4.1.7.1.1 |
testSignalStatusPrbsSyncThe test result of PRBS Synchronization default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.7.1.1.1 |
testSignalStatusTestTimeDurationThe time duration of signal test UNITS:secondsro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.7.1.1.2 |
testSignalStatusPrbsBitErrorCountThe counting of bit error by PRBS Synchronizationro IetfYangTypesGauge64 .1.3.6.1.4.1.42229.1.2.4.1.7.1.1.3 |
eth40g OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.8 |
eth40gTableRepresents the 40GBE object. SEQUENCE OF Eth40gEntry .1.3.6.1.4.1.42229.1.2.4.1.8.1 |
eth40gEntryEntry of eth40gTable Eth40gEntry .1.3.6.1.4.1.42229.1.2.4.1.8.1.1 |
eth40gEthFecTypeThe FEC working type of etyn port. default value :autoro CoriantTypesEthFec .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.1 |
eth40gEthFecTypeStateThe FEC working state of etyn port. default value :disabledro CoriantTypesEthFec .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.2 |
eth40gTransmitInterpacketgapSpecifies the minimum transmit IPG value. default value :8ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.3 |
eth40gGfpPayloadFcsEnabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.4 |
eth40gMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.5 |
eth40gAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.6 |
eth40gOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7 |
eth40gAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.8 |
eth40gAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.9 |
eth40gClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.10 |
eth40gClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.11 |
eth40gNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.12 |
eth40gAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.13 |
eth40gLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.14 |
eth40gLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.15 |
eth40gTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.16 |
eth40gTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.17 |
eth40gServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.18 |
eth40gLldpStatusIfPort level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabledro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19 |
eth40gHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.20 |
eth100g OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.9 |
eth100gTableRepresents the 100GBE object. SEQUENCE OF Eth100gEntry .1.3.6.1.4.1.42229.1.2.4.1.9.1 |
eth100gEntryEntry of eth100gTable Eth100gEntry .1.3.6.1.4.1.42229.1.2.4.1.9.1.1 |
eth100gEthFecTypeThe FEC working type of etyn port. default value :autoro CoriantTypesEthFec .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.1 |
eth100gEthFecTypeStateThe FEC working state of etyn port. default value :disabledro CoriantTypesEthFec .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.2 |
eth100gTransmitInterpacketgapSpecifies the minimum transmit IPG value. default value :8ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.3 |
eth100gGfpPayloadFcsEnabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.4 |
eth100gMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.5 |
eth100gAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.6 |
eth100gOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.7 |
eth100gAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.8 |
eth100gAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.9 |
eth100gClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.10 |
eth100gClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.11 |
eth100gNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.12 |
eth100gAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.13 |
eth100gLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.14 |
eth100gLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.15 |
eth100gTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.16 |
eth100gTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.17 |
eth100gServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.18 |
eth100gLldpStatusIfPort level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. Note: txOnly and txAndRx modes are not supported. default value :disabledro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.19 |
eth100gHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.9.1.1.20 |
otu4 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.10 |
otu4TableRepresents the otu4 object SEQUENCE OF Otu4Entry .1.3.6.1.4.1.42229.1.2.4.1.10.1 |
otu4EntryEntry of otu4Table Otu4Entry .1.3.6.1.4.1.42229.1.2.4.1.10.1.1 |
otu4FecTypeThe FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709ro CoriantTypesOtukFec .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.1 |
otu4AdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.2 |
otu4OperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.3 |
otu4AvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.4 |
otu4AliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.5 |
otu4ServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.6 |
otu4ExpSapiThe expected sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.7 |
otu4ExpDapiThe expected dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.8 |
otu4ExpOperatorThe expected operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.9 |
otu4TxSapiThe transmitter sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.10 |
otu4TxDapiThe transmitter dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.11 |
otu4TxOperatorThe transmitter operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.12 |
otu4TimDefectModeThe tim defect selection mode default value :NONEro CoriantTypesTimMode .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.13 |
otu4TimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.14 |
otu4RxSapiThe received sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.15 |
otu4RxDapiThe received dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.16 |
otu4RxOperatorThe received operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.17 |
otu4DegradeIntervalThe consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.18 |
otu4DegradeThresholdThe threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19 |
otu4LoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.20 |
otu4LoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.21 |
otu4ClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.22 |
otu4ClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.23 |
otu4HoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.24 |
otu4NearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.25 |
otu4AlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.10.1.1.26 |
otu2 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.11 |
otu2TableRepresents the otu2 object SEQUENCE OF Otu2Entry .1.3.6.1.4.1.42229.1.2.4.1.11.1 |
otu2EntryEntry of otu2Table Otu2Entry .1.3.6.1.4.1.42229.1.2.4.1.11.1.1 |
otu2FecTypeThe FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709ro CoriantTypesOtukFec .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.1 |
otu2AdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.2 |
otu2OperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3 |
otu2AvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.4 |
otu2AliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.5 |
otu2ServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.6 |
otu2ExpSapiThe expected sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.7 |
otu2ExpDapiThe expected dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.8 |
otu2ExpOperatorThe expected operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.9 |
otu2TxSapiThe transmitter sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10 |
otu2TxDapiThe transmitter dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.11 |
otu2TxOperatorThe transmitter operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.12 |
otu2TimDefectModeThe tim defect selection mode default value :NONEro CoriantTypesTimMode .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.13 |
otu2TimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.14 |
otu2RxSapiThe received sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.15 |
otu2RxDapiThe received dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.16 |
otu2RxOperatorThe received operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.17 |
otu2DegradeIntervalThe consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.18 |
otu2DegradeThresholdThe threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.19 |
otu2LoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.20 |
otu2LoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.21 |
otu2e OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.12 |
otu2eTableRepresents the otu2e object SEQUENCE OF Otu2eEntry .1.3.6.1.4.1.42229.1.2.4.1.12.1 |
otu2eEntryEntry of otu2eTable Otu2eEntry .1.3.6.1.4.1.42229.1.2.4.1.12.1.1 |
otu2eFecTypeThe FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709ro CoriantTypesOtukFec .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1 |
otu2eAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2 |
otu2eOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3 |
otu2eAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4 |
otu2eAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5 |
otu2eServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6 |
otu2eExpSapiThe expected sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7 |
otu2eExpDapiThe expected dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8 |
otu2eExpOperatorThe expected operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9 |
otu2eTxSapiThe transmitter sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10 |
otu2eTxDapiThe transmitter dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11 |
otu2eTxOperatorThe transmitter operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12 |
otu2eTimDefectModeThe tim defect selection mode default value :NONEro CoriantTypesTimMode .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13 |
otu2eTimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14 |
otu2eRxSapiThe received sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15 |
otu2eRxDapiThe received dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16 |
otu2eRxOperatorThe received operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17 |
otu2eDegradeIntervalThe consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18 |
otu2eDegradeThresholdThe threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19 |
otu2eLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20 |
otu2eLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21 |
fc8g OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.13 |
fc8gTableRepresents the FC8G object. SEQUENCE OF Fc8gEntry .1.3.6.1.4.1.42229.1.2.4.1.13.1 |
fc8gEntryEntry of fc8gTable Fc8gEntry .1.3.6.1.4.1.42229.1.2.4.1.13.1.1 |
fc8gMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.1 |
fc8gAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.2 |
fc8gOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.3 |
fc8gAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.4 |
fc8gAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.5 |
fc8gClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.6 |
fc8gClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.7 |
fc8gNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.8 |
fc8gAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.9 |
fc8gLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.10 |
fc8gLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.11 |
fc8gTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.12 |
fc8gTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.13 |
fc8gServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.14 |
fc8gHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.13.1.1.15 |
fc16g OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.14 |
fc16gTableRepresents the FC16G object. SEQUENCE OF Fc16gEntry .1.3.6.1.4.1.42229.1.2.4.1.14.1 |
fc16gEntryEntry of fc16gTable Fc16gEntry .1.3.6.1.4.1.42229.1.2.4.1.14.1.1 |
fc16gMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.1 |
fc16gAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.2 |
fc16gOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.3 |
fc16gAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.4 |
fc16gAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.5 |
fc16gClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.6 |
fc16gClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.7 |
fc16gNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.8 |
fc16gAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.9 |
fc16gLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.10 |
fc16gLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.11 |
fc16gTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.12 |
fc16gTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.13 |
fc16gServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.14 |
fc16gHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.14.1.1.15 |
oc192 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.15 |
oc192TableRepresents the OC192 object. SEQUENCE OF Oc192Entry .1.3.6.1.4.1.42229.1.2.4.1.15.1 |
oc192EntryEntry of oc192Table Oc192Entry .1.3.6.1.4.1.42229.1.2.4.1.15.1.1 |
oc192MappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.1 |
oc192AdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.2 |
oc192OperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.3 |
oc192AvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.4 |
oc192AliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.5 |
oc192ClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.6 |
oc192ClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.7 |
oc192NearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.8 |
oc192AlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.9 |
oc192LoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.10 |
oc192LoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.11 |
oc192TestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.12 |
oc192TestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.13 |
oc192ServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.14 |
oc192ExpTrcThe expected trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.15 |
oc192TxTrcThe transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.16 |
oc192RxTrcThe received trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.17 |
oc192TimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.18 |
oc192TimMonitorThe enable switching of tim defect monitor mode default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.19 |
oc192AisTypeNULL default value :Generic-AISro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.20 |
oc192HoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.15.1.1.21 |
stm64 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.16 |
stm64TableRepresents the STM64 object. SEQUENCE OF Stm64Entry .1.3.6.1.4.1.42229.1.2.4.1.16.1 |
stm64EntryEntry of stm64Table Stm64Entry .1.3.6.1.4.1.42229.1.2.4.1.16.1.1 |
stm64MappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.1 |
stm64AdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.2 |
stm64OperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3 |
stm64AvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.4 |
stm64AliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.5 |
stm64ClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.6 |
stm64ClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.7 |
stm64NearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.8 |
stm64AlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.9 |
stm64LoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.10 |
stm64LoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.11 |
stm64TestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.12 |
stm64TestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.13 |
stm64ServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.14 |
stm64ExpTrcThe expected trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.15 |
stm64TxTrcThe transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.16 |
stm64RxTrcThe received trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.17 |
stm64TimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.18 |
stm64TimMonitorThe enable switching of tim defect monitor mode default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.19 |
stm64AisTypeNULL default value :Generic-AISro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.20 |
stm64HoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.16.1.1.21 |
otuc2 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.17 |
otuc2TableRepresents the otuc2 object SEQUENCE OF Otuc2Entry .1.3.6.1.4.1.42229.1.2.4.1.17.1 |
otuc2EntryEntry of otuc2Table Otuc2Entry .1.3.6.1.4.1.42229.1.2.4.1.17.1.1 |
otuc2FecTypeThe FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709ro CoriantTypesOtukFec .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.1 |
otuc2AdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.2 |
otuc2OperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.3 |
otuc2AvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.4 |
otuc2AliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.5 |
otuc2ServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.6 |
otuc2ExpSapiThe expected sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.7 |
otuc2ExpDapiThe expected dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.8 |
otuc2ExpOperatorThe expected operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.9 |
otuc2TxSapiThe transmitter sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.10 |
otuc2TxDapiThe transmitter dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.11 |
otuc2TxOperatorThe transmitter operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.12 |
otuc2TimDefectModeThe tim defect selection mode default value :NONEro CoriantTypesTimMode .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.13 |
otuc2TimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.14 |
otuc2RxSapiThe received sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.15 |
otuc2RxDapiThe received dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.16 |
otuc2RxOperatorThe received operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.17 |
otuc2DegradeIntervalThe consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.18 |
otuc2DegradeThresholdThe threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.17.1.1.19 |
otuc3 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.18 |
otuc3TableRepresents the otuc3 object SEQUENCE OF Otuc3Entry .1.3.6.1.4.1.42229.1.2.4.1.18.1 |
otuc3EntryEntry of otuc3Table Otuc3Entry .1.3.6.1.4.1.42229.1.2.4.1.18.1.1 |
otuc3FecTypeThe FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709ro CoriantTypesOtukFec .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.1 |
otuc3AdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.2 |
otuc3OperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.3 |
otuc3AvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.4 |
otuc3AliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.5 |
otuc3ServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.6 |
otuc3ExpSapiThe expected sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.7 |
otuc3ExpDapiThe expected dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.8 |
otuc3ExpOperatorThe expected operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.9 |
otuc3TxSapiThe transmitter sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.10 |
otuc3TxDapiThe transmitter dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.11 |
otuc3TxOperatorThe transmitter operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.12 |
otuc3TimDefectModeThe tim defect selection mode default value :NONEro CoriantTypesTimMode .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.13 |
otuc3TimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.14 |
otuc3RxSapiThe received sapi(Source Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.15 |
otuc3RxDapiThe received dapi(Destination Access Point Identifier)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.16 |
otuc3RxOperatorThe received operator TTIro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.17 |
otuc3DegradeIntervalThe consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default value :7ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.18 |
otuc3DegradeThresholdThe threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.18.1.1.19 |
ochOs OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.19 |
ochOsTableRepresents the och-os MO SEQUENCE OF OchOsEntry .1.3.6.1.4.1.42229.1.2.4.1.19.1 |
ochOsEntryEntry of ochOsTable OchOsEntry .1.3.6.1.4.1.42229.1.2.4.1.19.1.1 |
ochOsModulationFormatCurrently och-os modulation formatro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1 |
ochOsLineEncodingCurrently line-encoding modero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2 |
ochOsFrequencyThe laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0ro CoriantTypesFreq .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3 |
ochOsActualFrequencyThe actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0ro CoriantTypesFreq .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4 |
ochOsRxFrequencyThe rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0ro CoriantTypesFreq .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5 |
ochOsActualRxFrequencyThe actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0ro CoriantTypesFreq .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6 |
ochOsLaserEnableThe enable switching of output laser. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7 |
ochOsRequiredTxOpticalPowerThis is to support adjustable optical power of Line side. default value :1.0ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8 |
ochOsActualTxOpticalPowerThis is the actual transmitting optical power of Line side. default value :-99.0ro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9 |
ochOsFecTypeThe FEC type of och-os default value :SDFEC25ro CoriantTypesOtukFec .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10 |
ochOsRxAttenuationThis is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11 |
ochOsTxFilterRollOffTransmitter filter roll off factor. default value :0.2ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12 |
ochOsPreemphasisPreemphasis of transmitted signal. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13 |
ochOsPreemphasisValuePreemphasis of transmitted signal. default value :1.0ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14 |
ochOsAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15 |
ochOsOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16 |
ochOsAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17 |
ochOsAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18 |
ochOsLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19 |
ochOsLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20 |
ochOsServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21 |
ochOsDGDValue of Differential Group Delay UNITS:psro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22 |
ochOsCDValue of Chromatic Dispersion UNITS:ps/nmro INTEGER .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23 |
ochOsOSNRCurrent value of OSNR. The result could be OSNR value with dBro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24 |
ochOsQFactorCurrent value of Q-factorro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25 |
ochOsPreFecBerCurrent value of PreFEC Bit Error Ratio. default value :-99.0ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26 |
ochOsCdRangeLowlow value of chromatic dispersion search range. UNITS:ps/nm default value :-45000ro INTEGER .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27 |
ochOsCdRangeHighhigh value of chromatic dispersion search range. UNITS:ps/nm default value :45000ro INTEGER .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28 |
ochOsPropagateShutdownWhen the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used in regeneration node to propagate signal failure as LOS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29 |
ochOsFastSopModeSpecify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31 |
wan10gSonet OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.30 |
wan10gSonetTableRepresents the 10GWAN_SONET object. SEQUENCE OF Wan10gSonetEntry .1.3.6.1.4.1.42229.1.2.4.1.30.1 |
wan10gSonetEntryEntry of wan10gSonetTable Wan10gSonetEntry .1.3.6.1.4.1.42229.1.2.4.1.30.1.1 |
wan10gSonetMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.1 |
wan10gSonetAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.2 |
wan10gSonetOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.3 |
wan10gSonetAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.4 |
wan10gSonetAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.5 |
wan10gSonetClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.6 |
wan10gSonetClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.7 |
wan10gSonetHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.8 |
wan10gSonetNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.9 |
wan10gSonetAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.10 |
wan10gSonetLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.11 |
wan10gSonetLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.12 |
wan10gSonetTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.13 |
wan10gSonetTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.14 |
wan10gSonetServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.15 |
wan10gSonetExpTrcThe expected trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.16 |
wan10gSonetTxTrcThe transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.17 |
wan10gSonetRxTrcThe received trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.18 |
wan10gSonetTimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.19 |
wan10gSonetTimMonitorThe enable switching of tim defect monitor mode default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.20 |
wan10gSonetAisTypeNULL default value :Generic-AISro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.30.1.1.21 |
wan10gSdh OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.31 |
wan10gSdhTableRepresents the 10GWAN_SDH object. SEQUENCE OF Wan10gSdhEntry .1.3.6.1.4.1.42229.1.2.4.1.31.1 |
wan10gSdhEntryEntry of wan10gSdhTable Wan10gSdhEntry .1.3.6.1.4.1.42229.1.2.4.1.31.1.1 |
wan10gSdhMappingModeThe mapping mode of client port packets into ODUk. default value :not-applicablero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.1 |
wan10gSdhAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.2 |
wan10gSdhOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.3 |
wan10gSdhAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.4 |
wan10gSdhAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.5 |
wan10gSdhClientShutdownThe switching of client-shutdown. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.6 |
wan10gSdhClientShutdownHoldoffTimerThe hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.7 |
wan10gSdhHoldoffSignalSpecify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.8 |
wan10gSdhNearEndAlsThe switching of near end ALS. default value :noro CoriantTypesYesNo .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.9 |
wan10gSdhAlsDegradeModeThe switching of defect BERSD-ODU trig ALS default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.10 |
wan10gSdhLoopbackEnableThe enable switching of loopback function. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.11 |
wan10gSdhLoopbackTypeThe type mode of loopback function default value :nonero Enumeration .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.12 |
wan10gSdhTestSignalTypeThe type mode of test signal. default value :NONEro CoriantTypesTestSignalType .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.13 |
wan10gSdhTestSignalEnableThe enable switching of test signal function default value :NONEro CoriantTypesTestSignalConfig .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.14 |
wan10gSdhServiceLabelPath/service name of cross-connection related facility.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.15 |
wan10gSdhExpTrcThe expected trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.16 |
wan10gSdhTxTrcThe transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.17 |
wan10gSdhRxTrcThe received trc(trail trace identification)ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.18 |
wan10gSdhTimActThe enable switching of inserting AIS by tim function default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.19 |
wan10gSdhTimMonitorThe enable switching of tim defect monitor mode default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.20 |
wan10gSdhAisTypeNULL default value :Generic-AISro Enumeration .1.3.6.1.4.1.42229.1.2.4.1.31.1.1.21 |
eth10gStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.32 |
eth10gStatisticsTableNULL SEQUENCE OF Eth10gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.32.1 |
eth10gStatisticsEntryEntry of eth10gStatisticsTable Eth10gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.32.1.1 |
eth10gStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.1 |
eth10gStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.2 |
eth10gStatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.3 |
eth10gStatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.4 |
eth10gStatisticsEntryInSymbolErrorsthe statistics Times counting for input signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.5 |
eth10gStatisticsEntryInDropEventsthe statistics counting for input signal drop events UNITS:eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.6 |
eth10gStatisticsEntryInOctetsthe statistics counting for input signal octets UNITS:octetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.7 |
eth10gStatisticsEntryInPacketsthe statistics counting for input signal packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.8 |
eth10gStatisticsEntryInBroadcastPacketsthe statistics counting for input broadcast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.9 |
eth10gStatisticsEntryInMulticastPacketsthe statistics counting for input multicast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.10 |
eth10gStatisticsEntryInCrcAlignErrorsthe statistics counting for input CRC error packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.11 |
eth10gStatisticsEntryInUndersizePacketsthe statistics counting for input undersize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.12 |
eth10gStatisticsEntryInOversizePacketsthe statistics counting for input oversize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.13 |
eth10gStatisticsEntryInFragmentsthe statistics counting for input fragment packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.14 |
eth10gStatisticsEntryInJabbersthe statistics counting for input jabber packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.15 |
eth10gStatisticsEntryInPackets64octetsthe statistics counting for input 64 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.16 |
eth10gStatisticsEntryInPackets65to127octetsthe statistics counting for input 65 to 127 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.17 |
eth10gStatisticsEntryInPackets128to255octetsthe statistics counting for input 128 to 255 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.18 |
eth10gStatisticsEntryInPackets256to511octetsthe statistics counting for input 256 to 511 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.19 |
eth10gStatisticsEntryInPackets512to1023octetsthe statistics counting for input 512 to 1023 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.20 |
eth10gStatisticsEntryInPackets1024to1518octetsthe statistics counting for input 1024 to 1518 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.21 |
eth10gStatisticsEntryOutSymbolErrorsthe statistics Times counting for output signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.22 |
eth10gStatisticsEntryOutDropEventsthe statistics counting for output signal drop events UNITS:eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.23 |
eth10gStatisticsEntryOutOctetsthe statistics counting for output signal octets UNITS:octetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.24 |
eth10gStatisticsEntryOutPacketsthe statistics counting for output signal packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.25 |
eth10gStatisticsEntryOutBroadcastPacketsthe statistics counting for output broadcast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.26 |
eth10gStatisticsEntryOutMulticastPacketsthe statistics counting for output multicast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.27 |
eth10gStatisticsEntryOutCrcAlignErrorsthe statistics counting for output CRC error packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.28 |
eth10gStatisticsEntryOutUndersizePacketsthe statistics counting for output undersize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.29 |
eth10gStatisticsEntryOutOversizePacketsthe statistics counting for output oversize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.30 |
eth10gStatisticsEntryOutFragmentsthe statistics counting for output fragment packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.31 |
eth10gStatisticsEntryOutJabbersthe statistics counting for output jabber packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.32 |
eth10gStatisticsEntryOutPackets64octetsthe statistics counting for output 64 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.33 |
eth10gStatisticsEntryOutPackets65to127octetsthe statistics counting for output 65 to 127 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.34 |
eth10gStatisticsEntryOutPackets128to255octetsthe statistics counting for output 128 to 255 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.35 |
eth10gStatisticsEntryOutPackets256to511octetsthe statistics counting for output 256 to 511 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.36 |
eth10gStatisticsEntryOutPackets512to1023octetsthe statistics counting for output 512 to 1023 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.37 |
eth10gStatisticsEntryOutPackets1024to1518octetsthe statistics counting for output 1024 to 1518 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.32.1.1.38 |
oduStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.33 |
oduStatisticsTableNULL SEQUENCE OF OduStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.33.1 |
oduStatisticsEntryEntry of oduStatisticsTable OduStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.33.1.1 |
oduStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.33.1.1.1 |
oduStatisticsEntryErroredBlocksthe statistics counting for errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.33.1.1.2 |
oduStatisticsEntryErroredSecondsthe statistics seconds counting for errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.33.1.1.3 |
oduStatisticsEntrySeverelyErroredSecondsthe statistics seconds counting for severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.33.1.1.4 |
oduStatisticsEntryUnavailableSecondsthe statistics seconds counting for unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.33.1.1.5 |
oduStatisticsEntryEncryptionFailRxFailed Encryption Frames of Receive side UNITS:framesro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.33.1.1.6 |
eth40gStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.34 |
eth40gStatisticsTableNULL SEQUENCE OF Eth40gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.34.1 |
eth40gStatisticsEntryEntry of eth40gStatisticsTable Eth40gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.34.1.1 |
eth40gStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.1 |
eth40gStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.2 |
eth40gStatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.3 |
eth40gStatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.4 |
eth40gStatisticsEntryInSymbolErrorsthe statistics Times counting for input signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.5 |
eth40gStatisticsEntryInDropEventsthe statistics counting for input signal drop events UNITS:eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.6 |
eth40gStatisticsEntryInOctetsthe statistics counting for input signal octets UNITS:octetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.7 |
eth40gStatisticsEntryInPacketsthe statistics counting for input signal packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.8 |
eth40gStatisticsEntryInBroadcastPacketsthe statistics counting for input broadcast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.9 |
eth40gStatisticsEntryInMulticastPacketsthe statistics counting for input multicast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.10 |
eth40gStatisticsEntryInCrcAlignErrorsthe statistics counting for input CRC error packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.11 |
eth40gStatisticsEntryInUndersizePacketsthe statistics counting for input undersize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.12 |
eth40gStatisticsEntryInOversizePacketsthe statistics counting for input oversize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.13 |
eth40gStatisticsEntryInFragmentsthe statistics counting for input fragment packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.14 |
eth40gStatisticsEntryInJabbersthe statistics counting for input jabber packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.15 |
eth40gStatisticsEntryInPackets64octetsthe statistics counting for input 64 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.16 |
eth40gStatisticsEntryInPackets65to127octetsthe statistics counting for input 65 to 127 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.17 |
eth40gStatisticsEntryInPackets128to255octetsthe statistics counting for input 128 to 255 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.18 |
eth40gStatisticsEntryInPackets256to511octetsthe statistics counting for input 256 to 511 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.19 |
eth40gStatisticsEntryInPackets512to1023octetsthe statistics counting for input 512 to 1023 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.20 |
eth40gStatisticsEntryInPackets1024to1518octetsthe statistics counting for input 1024 to 1518 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.21 |
eth40gStatisticsEntryOutSymbolErrorsthe statistics Times counting for output signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.22 |
eth40gStatisticsEntryOutDropEventsthe statistics counting for output signal drop events UNITS:eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.23 |
eth40gStatisticsEntryOutOctetsthe statistics counting for output signal octets UNITS:octetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.24 |
eth40gStatisticsEntryOutPacketsthe statistics counting for output signal packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.25 |
eth40gStatisticsEntryOutBroadcastPacketsthe statistics counting for output broadcast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.26 |
eth40gStatisticsEntryOutMulticastPacketsthe statistics counting for output multicast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.27 |
eth40gStatisticsEntryOutCrcAlignErrorsthe statistics counting for output CRC error packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.28 |
eth40gStatisticsEntryOutUndersizePacketsthe statistics counting for output undersize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.29 |
eth40gStatisticsEntryOutOversizePacketsthe statistics counting for output oversize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.30 |
eth40gStatisticsEntryOutFragmentsthe statistics counting for output fragment packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.31 |
eth40gStatisticsEntryOutJabbersthe statistics counting for output jabber packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.32 |
eth40gStatisticsEntryOutPackets64octetsthe statistics counting for output 64 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.33 |
eth40gStatisticsEntryOutPackets65to127octetsthe statistics counting for output 65 to 127 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.34 |
eth40gStatisticsEntryOutPackets128to255octetsthe statistics counting for output 128 to 255 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.35 |
eth40gStatisticsEntryOutPackets256to511octetsthe statistics counting for output 256 to 511 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.36 |
eth40gStatisticsEntryOutPackets512to1023octetsthe statistics counting for output 512 to 1023 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.37 |
eth40gStatisticsEntryOutPackets1024to1518octetsthe statistics counting for output 1024 to 1518 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.34.1.1.38 |
eth100gStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.35 |
eth100gStatisticsTableNULL SEQUENCE OF Eth100gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.35.1 |
eth100gStatisticsEntryEntry of eth100gStatisticsTable Eth100gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.35.1.1 |
eth100gStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.1 |
eth100gStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.2 |
eth100gStatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.3 |
eth100gStatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.4 |
eth100gStatisticsEntryInSymbolErrorsthe statistics Times counting for input signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.5 |
eth100gStatisticsEntryInDropEventsthe statistics counting for input signal drop events UNITS:eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.6 |
eth100gStatisticsEntryInOctetsthe statistics counting for input signal octets UNITS:octetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.7 |
eth100gStatisticsEntryInPacketsthe statistics counting for input signal packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.8 |
eth100gStatisticsEntryInBroadcastPacketsthe statistics counting for input broadcast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.9 |
eth100gStatisticsEntryInMulticastPacketsthe statistics counting for input multicast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.10 |
eth100gStatisticsEntryInCrcAlignErrorsthe statistics counting for input CRC error packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.11 |
eth100gStatisticsEntryInUndersizePacketsthe statistics counting for input undersize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.12 |
eth100gStatisticsEntryInOversizePacketsthe statistics counting for input oversize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.13 |
eth100gStatisticsEntryInFragmentsthe statistics counting for input fragment packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.14 |
eth100gStatisticsEntryInJabbersthe statistics counting for input jabber packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.15 |
eth100gStatisticsEntryInPackets64octetsthe statistics counting for input 64 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.16 |
eth100gStatisticsEntryInPackets65to127octetsthe statistics counting for input 65 to 127 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.17 |
eth100gStatisticsEntryInPackets128to255octetsthe statistics counting for input 128 to 255 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.18 |
eth100gStatisticsEntryInPackets256to511octetsthe statistics counting for input 256 to 511 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.19 |
eth100gStatisticsEntryInPackets512to1023octetsthe statistics counting for input 512 to 1023 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.20 |
eth100gStatisticsEntryInPackets1024to1518octetsthe statistics counting for input 1024 to 1518 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.21 |
eth100gStatisticsEntryOutSymbolErrorsthe statistics Times counting for output signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.22 |
eth100gStatisticsEntryOutDropEventsthe statistics counting for output signal drop events UNITS:eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.23 |
eth100gStatisticsEntryOutOctetsthe statistics counting for output signal octets UNITS:octetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.24 |
eth100gStatisticsEntryOutPacketsthe statistics counting for output signal packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.25 |
eth100gStatisticsEntryOutBroadcastPacketsthe statistics counting for output broadcast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.26 |
eth100gStatisticsEntryOutMulticastPacketsthe statistics counting for output multicast packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.27 |
eth100gStatisticsEntryOutCrcAlignErrorsthe statistics counting for output CRC error packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.28 |
eth100gStatisticsEntryOutUndersizePacketsthe statistics counting for output undersize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.29 |
eth100gStatisticsEntryOutOversizePacketsthe statistics counting for output oversize packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.30 |
eth100gStatisticsEntryOutFragmentsthe statistics counting for output fragment packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.31 |
eth100gStatisticsEntryOutJabbersthe statistics counting for output jabber packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.32 |
eth100gStatisticsEntryOutPackets64octetsthe statistics counting for output 64 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.33 |
eth100gStatisticsEntryOutPackets65to127octetsthe statistics counting for output 65 to 127 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.34 |
eth100gStatisticsEntryOutPackets128to255octetsthe statistics counting for output 128 to 255 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.35 |
eth100gStatisticsEntryOutPackets256to511octetsthe statistics counting for output 256 to 511 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.36 |
eth100gStatisticsEntryOutPackets512to1023octetsthe statistics counting for output 512 to 1023 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.37 |
eth100gStatisticsEntryOutPackets1024to1518octetsthe statistics counting for output 1024 to 1518 octets packets UNITS:packetsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.35.1.1.38 |
otu4Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.36 |
otu4StatisticsTableNULL SEQUENCE OF Otu4StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.36.1 |
otu4StatisticsEntryEntry of otu4StatisticsTable Otu4StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.36.1.1 |
otu4StatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.1 |
otu4StatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.2 |
otu4StatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.3 |
otu4StatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.4 |
otu4StatisticsEntryErroredBlocksthe statistics counting for errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.5 |
otu4StatisticsEntryErroredSecondsthe statistics seconds counting for errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.6 |
otu4StatisticsEntrySeverelyErroredSecondsthe statistics seconds counting for severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.7 |
otu4StatisticsEntryUnavailableSecondsthe statistics seconds counting for unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.36.1.1.8 |
otu2Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.37 |
otu2StatisticsTableNULL SEQUENCE OF Otu2StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.37.1 |
otu2StatisticsEntryEntry of otu2StatisticsTable Otu2StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.37.1.1 |
otu2StatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.1 |
otu2StatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.2 |
otu2StatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.3 |
otu2StatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.4 |
otu2StatisticsEntryErroredBlocksthe statistics counting for errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.5 |
otu2StatisticsEntryErroredSecondsthe statistics seconds counting for errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.6 |
otu2StatisticsEntrySeverelyErroredSecondsthe statistics seconds counting for severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.7 |
otu2StatisticsEntryUnavailableSecondsthe statistics seconds counting for unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.37.1.1.8 |
otu2eStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.38 |
otu2eStatisticsTableNULL SEQUENCE OF Otu2eStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.38.1 |
otu2eStatisticsEntryEntry of otu2eStatisticsTable Otu2eStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.38.1.1 |
otu2eStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.1 |
otu2eStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.2 |
otu2eStatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.3 |
otu2eStatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.4 |
otu2eStatisticsEntryErroredBlocksthe statistics counting for errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.5 |
otu2eStatisticsEntryErroredSecondsthe statistics seconds counting for errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.6 |
otu2eStatisticsEntrySeverelyErroredSecondsthe statistics seconds counting for severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.7 |
otu2eStatisticsEntryUnavailableSecondsthe statistics seconds counting for unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.38.1.1.8 |
oc192Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.39 |
oc192StatisticsTableNULL SEQUENCE OF Oc192StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.39.1 |
oc192StatisticsEntryEntry of oc192StatisticsTable Oc192StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.39.1.1 |
oc192StatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.1 |
oc192StatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.2 |
oc192StatisticsEntryInCodingViolationthe statistics bits counting for ingress coding violation UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.3 |
oc192StatisticsEntryInErroredSecondsthe statistics seconds counting for RX errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.4 |
oc192StatisticsEntryInSeverelyErroredSecondsthe statistics seconds counting for RX severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.5 |
oc192StatisticsEntryInUnavailableSecondsthe statistics seconds counting for RX unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.6 |
oc192StatisticsEntryInSeverelyErroredFrameSecondthe statistics seconds counting for ingress signal frame severely errored UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.39.1.1.7 |
stm64Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.40 |
stm64StatisticsTableNULL SEQUENCE OF Stm64StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.40.1 |
stm64StatisticsEntryEntry of stm64StatisticsTable Stm64StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.40.1.1 |
stm64StatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.1 |
stm64StatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.2 |
stm64StatisticsEntryInBackgroundBlockErrorthe statistics counting for ingress errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.3 |
stm64StatisticsEntryInErroredSecondsthe statistics seconds counting for RX errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.4 |
stm64StatisticsEntryInSeverelyErroredSecondsthe statistics seconds counting for RX severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.5 |
stm64StatisticsEntryInUnavailableSecondsthe statistics seconds counting for RX unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.6 |
stm64StatisticsEntryInOutOfFrameSecondsthe statistics seconds counting for ingress signal lose of frame UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.40.1.1.7 |
wan10gSonetStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.41 |
wan10gSonetStatisticsTableNULL SEQUENCE OF Wan10gSonetStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.41.1 |
wan10gSonetStatisticsEntryEntry of wan10gSonetStatisticsTable Wan10gSonetStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.41.1.1 |
wan10gSonetStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.1 |
wan10gSonetStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.2 |
wan10gSonetStatisticsEntryInCodingViolationthe statistics bits counting for ingress coding violation UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.3 |
wan10gSonetStatisticsEntryInErroredSecondsthe statistics seconds counting for RX errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.4 |
wan10gSonetStatisticsEntryInSeverelyErroredSecondsthe statistics seconds counting for RX severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.5 |
wan10gSonetStatisticsEntryInUnavailableSecondsthe statistics seconds counting for RX unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.6 |
wan10gSonetStatisticsEntryInSeverelyErroredFrameSecondthe statistics seconds counting for ingress signal frame severely errored UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.41.1.1.7 |
wan10gSdhStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.42 |
wan10gSdhStatisticsTableNULL SEQUENCE OF Wan10gSdhStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.42.1 |
wan10gSdhStatisticsEntryEntry of wan10gSdhStatisticsTable Wan10gSdhStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.42.1.1 |
wan10gSdhStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.1 |
wan10gSdhStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.2 |
wan10gSdhStatisticsEntryInBackgroundBlockErrorthe statistics counting for ingress errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.3 |
wan10gSdhStatisticsEntryInErroredSecondsthe statistics seconds counting for RX errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.4 |
wan10gSdhStatisticsEntryInSeverelyErroredSecondsthe statistics seconds counting for RX severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.5 |
wan10gSdhStatisticsEntryInUnavailableSecondsthe statistics seconds counting for RX unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.6 |
wan10gSdhStatisticsEntryInOutOfFrameSecondsthe statistics seconds counting for ingress signal lose of frame UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.42.1.1.7 |
fc8gStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.43 |
fc8gStatisticsTableNULL SEQUENCE OF Fc8gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.43.1 |
fc8gStatisticsEntryEntry of fc8gStatisticsTable Fc8gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.43.1.1 |
fc8gStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.43.1.1.1 |
fc8gStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.43.1.1.2 |
fc8gStatisticsEntryInSymbolErrorsthe statistics Times counting for signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.43.1.1.3 |
fc16gStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.44 |
fc16gStatisticsTableNULL SEQUENCE OF Fc16gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.44.1 |
fc16gStatisticsEntryEntry of fc16gStatisticsTable Fc16gStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.44.1.1 |
fc16gStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.44.1.1.1 |
fc16gStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.44.1.1.2 |
fc16gStatisticsEntryInSymbolErrorsthe statistics Times counting for signal symbol errors UNITS:Eventsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.44.1.1.3 |
otuc2Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.45 |
otuc2StatisticsTableNULL SEQUENCE OF Otuc2StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.45.1 |
otuc2StatisticsEntryEntry of otuc2StatisticsTable Otuc2StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.45.1.1 |
otuc2StatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.1 |
otuc2StatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.2 |
otuc2StatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.3 |
otuc2StatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.4 |
otuc2StatisticsEntryErroredBlocksthe statistics counting for errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.5 |
otuc2StatisticsEntryErroredSecondsthe statistics seconds counting for errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.6 |
otuc2StatisticsEntrySeverelyErroredSecondsthe statistics seconds counting for severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.7 |
otuc2StatisticsEntryUnavailableSecondsthe statistics seconds counting for unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.45.1.1.8 |
otuc3Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.46 |
otuc3StatisticsTableNULL SEQUENCE OF Otuc3StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.46.1 |
otuc3StatisticsEntryEntry of otuc3StatisticsTable Otuc3StatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.46.1.1 |
otuc3StatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.1 |
otuc3StatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.2 |
otuc3StatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.3 |
otuc3StatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.4 |
otuc3StatisticsEntryErroredBlocksthe statistics counting for errored blocks UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.5 |
otuc3StatisticsEntryErroredSecondsthe statistics seconds counting for errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.6 |
otuc3StatisticsEntrySeverelyErroredSecondsthe statistics seconds counting for severely errored signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.7 |
otuc3StatisticsEntryUnavailableSecondsthe statistics seconds counting for unavailable signal UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.46.1.1.8 |
ochOsStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.1.47 |
ochOsStatisticsTableNULL SEQUENCE OF OchOsStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.47.1 |
ochOsStatisticsEntryEntry of ochOsStatisticsTable OchOsStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.1.47.1.1 |
ochOsStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.1.47.1.1.1 |
ochOsStatisticsEntryLossOfSignalSecondsthe statistics seconds counting for signal loss UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.47.1.1.2 |
ochOsStatisticsEntryBitErrorFecthe statistics bits counting for error bit forward error correction UNITS:bitsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.47.1.1.3 |
ochOsStatisticsEntryUncorrectedBlockErrorFecthe statistics blocks counting for uncorrected block error forward error correction UNITS:blocksro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.1.47.1.1.4 |
cRS OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.3 |
cRSTableCross connection table. SEQUENCE OF CRSEntry .1.3.6.1.4.1.42229.1.2.4.3.1 |
cRSEntryEntry of cRSTable CRSEntry .1.3.6.1.4.1.42229.1.2.4.3.1.1 |
cRSSrcTpSource tp of cross connection.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.4.3.1.1.1 |
cRSDstTpDestination tp of cross connection.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.4.3.1.1.2 |
cRSServiceLabelPath/service name of cross-connection.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.3.1.1.3 |
cRSManagedByDescribes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :userro Enumeration .1.3.6.1.4.1.42229.1.2.4.3.1.1.4 |
cRSAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.3.1.1.5 |
fiberConnection OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.4 |
fiberConnectionTableFiber connection table which will be user managed and be explicitly provisioned by user. Fiber Connection indicates the physical fiber connection between physical ports or subports. SEQUENCE OF FiberConnectionEntry .1.3.6.1.4.1.42229.1.2.4.4.1 |
fiberConnectionEntryEntry of fiberConnectionTable FiberConnectionEntry .1.3.6.1.4.1.42229.1.2.4.4.1.1 |
fiberConnectionSrcPortSource port of fiber connection.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.4.4.1.1.1 |
fiberConnectionDstPortDestination port of fiber connection.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.4.4.1.1.2 |
fiberConnectionTypeIndicates fiber connection type. default value :two-wayro Enumeration .1.3.6.1.4.1.42229.1.2.4.4.1.1.3 |
fiberConnectionFiberLabelLabel of fiber connection.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.4.1.1.4 |
fiberConnectionAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.4.1.1.5 |
optical OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5 |
ots OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.2 |
otsTableRepresents the Optical Transmission Section (OTS) interface entity SEQUENCE OF OtsEntry .1.3.6.1.4.1.42229.1.2.4.5.2.1 |
otsEntryEntry of otsTable OtsEntry .1.3.6.1.4.1.42229.1.2.4.5.2.1.1 |
otsNameThe name is defined to uniquely identify the ots optical interface.ro CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.1 |
otsAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.2 |
otsOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.3 |
otsAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.4 |
otsAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.5 |
otsSupportingRxPortSupporting Rx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.6 |
otsSupportingTxPortSupporting Tx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.7 |
otsMeasuredSpanLossThe measured span loss excluding offset.ro CoriantTypesOpticalDB .1.3.6.1.4.1.42229.1.2.4.5.2.1.1.8 |
oms OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.3 |
omsTableRepresents the optical multiplex section (OMS) interface MO SEQUENCE OF OmsEntry .1.3.6.1.4.1.42229.1.2.4.5.3.1 |
omsEntryEntry of omsTable OmsEntry .1.3.6.1.4.1.42229.1.2.4.5.3.1.1 |
omsNameThe name is defined to uniquely identify the oms optical interface.ro CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.1 |
omsAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.2 |
omsOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.3 |
omsAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.4 |
omsAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.5 |
omsSupportingRxPortSupporting Rx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.6 |
omsSupportingTxPortSupporting Tx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.7 |
omsParentOtsInterfaceSupporting OTS interface.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.8 |
omsRxOpticalPowerReceived optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.9 |
omsTxOpticalPowerTransmitted optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.5.3.1.1.10 |
osc OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.4 |
oscTableRepresents the Optical Supervision Channel (OSC) MO SEQUENCE OF OscEntry .1.3.6.1.4.1.42229.1.2.4.5.4.1 |
oscEntryEntry of oscTable OscEntry .1.3.6.1.4.1.42229.1.2.4.5.4.1.1 |
oscNameThe name is defined to uniquely identify the osc optical interface.ro CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.1 |
oscAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.2 |
oscOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.3 |
oscAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.4 |
oscAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.5 |
oscSupportingRxPortSupporting Rx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.6 |
oscSupportingTxPortSupporting Tx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.7 |
oscParentOtsInterfaceSupporting OTS insterface.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.8 |
oscModeIndicating the current OSC mode. default value :155M52ro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.9 |
oscWavelengthIndicates the wavelength band of the OSC channel. UNITS:nm default value :1510ro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.10 |
oscDataCommunicationConfiguration for enable or disable data communication network support of the OSC. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.11 |
oscRxOpticalPowerReceived optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.12 |
oscTxOpticalPowerTransmitted optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.5.4.1.1.13 |
gopt OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.5 |
goptTableRepresents the Generic Optical Section Interface (GOPT) MO SEQUENCE OF GoptEntry .1.3.6.1.4.1.42229.1.2.4.5.5.1 |
goptEntryEntry of goptTable GoptEntry .1.3.6.1.4.1.42229.1.2.4.5.5.1.1 |
goptNameThe name is defined to uniquely identify the gopt optical interface.ro CoriantTypesNameIdentifier .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.1 |
goptAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.2 |
goptOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.3 |
goptAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.4 |
goptAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.5 |
goptSupportingRxPortSupporting Rx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.6 |
goptSupportingTxPortSupporting Tx port for the optical interface.ro OpticalCommonSupportingPort .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.7 |
goptRxOpticalPowerReceived optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.8 |
goptTxOpticalPowerTransmitted optical powerro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.4.5.5.1.1.9 |
omsStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.9 |
omsStatisticsTableNULL SEQUENCE OF OmsStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.5.9.1 |
omsStatisticsEntryEntry of omsStatisticsTable OmsStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.5.9.1.1 |
omsStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.5.9.1.1.1 |
oscStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.10 |
oscStatisticsTableNULL SEQUENCE OF OscStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.5.10.1 |
oscStatisticsEntryEntry of oscStatisticsTable OscStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.5.10.1.1 |
oscStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.5.10.1.1.1 |
goptStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.5.11 |
goptStatisticsTableNULL SEQUENCE OF GoptStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.5.11.1 |
goptStatisticsEntryEntry of goptStatisticsTable GoptStatisticsEntry .1.3.6.1.4.1.42229.1.2.4.5.11.1.1 |
goptStatisticsEntryProtectionSwitchDurationProtection Switch Duration UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.11.1.1.1 |
goptStatisticsEntryProtectionSwitchCountProtection Switch Count UNITS:timesro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.11.1.1.2 |
goptStatisticsEntryLossTxLoss of Signal Seconds of Transmit side UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.11.1.1.3 |
goptStatisticsEntryLossRxLoss of Signal Seconds of Receive side UNITS:secondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.4.5.11.1.1.4 |
goptStatisticsEntryLastClearThe start time of statistics monitor default value :0000-00-00T00:00:00.000Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.4.5.11.1.1.5 |
lldp OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.4.6 |
lldpStatusNeGlobal lldp control on NE level. Value of 'enabled', then the LLDP agent will receive, but it will not transmit LLDP frames on all ports with port level lldp not disabled of the NE. Value of 'disabled', then LLDP agent will not filter and receive LLDP frames on all ports of the NE. If there is remote systems information which is received on ports supporting LLDP and stored in the system before the lldp-status becomes disabled, then the information will naturally age out. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.4.6.1 |
performance OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.5 |
performanceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.5.1 |
performancePmdaystartSpecifies the hour of starting collecting 1-DAY monitoring parameters. To reset the NE clock to the default value of 00:00 hours, the parameter should contain the value 0. UNITS:hour default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.5.1.1 |
performanceStatisticsEnableThe global switch for all system statistics data collection. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.5.1.2 |
pmPoint OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.5.2 |
pmPointTableThe list of performance monitoring points associated with the monitored management object. SEQUENCE OF PmPointEntry .1.3.6.1.4.1.42229.1.2.5.2.1 |
pmPointEntryEntry of pmPointTable PmPointEntry .1.3.6.1.4.1.42229.1.2.5.2.1.1 |
pmPointPmEntitySpecifies the management object instance the performance monitoring data are collected for.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.5.2.1.1.1 |
pmPointPmpTypeSpecifies the type of performance monitoring point.ro CoriantPmtypesPmpType .1.3.6.1.4.1.42229.1.2.5.2.1.1.2 |
pmPointPmTimePeriodSpecifies the time-period increments during which PM data are collected.ro CoriantTypesManagementTimePeriod .1.3.6.1.4.1.42229.1.2.5.2.1.1.3 |
pmPointSupervisionSwitchEnable/disable counting for all performance monitoring parameters of the given PMP. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.5.2.1.1.4 |
pmPointThresholdingSwitchEnable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.5.2.1.1.5 |
pmPointHistoryRecordingEnable/disable the history data storage for all performance monitoring parameters of the given PM point. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.5.2.1.1.6 |
pmData OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.5.3 |
pmDataCurrentTableDefines the get-pm output of record performance data for current time SEQUENCE OF PmDataCurrentEntry .1.3.6.1.4.1.42229.1.2.5.3.2 |
pmDataCurrentEntryEntry of pmDataCurrentTable PmDataCurrentEntry .1.3.6.1.4.1.42229.1.2.5.3.2.1 |
pmDataCurrentMonitoringDateTimeMonitoring data and time'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.5.3.2.1.1 |
pmDataCurrentPmParameterPerformance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. CoriantPmtypesPmParameter .1.3.6.1.4.1.42229.1.2.5.3.2.1.2 |
pmDataCurrentPmValuePM counter or gauge value of the PM parameter.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.5.3.2.1.3 |
pmDataCurrentPmUnitUnit of PM value.ro CoriantCommonpmUnitOfValue .1.3.6.1.4.1.42229.1.2.5.3.2.1.4 |
pmDataCurrentValidityIndicates whether or not a performance monitoring value is valid.ro CoriantPmtypesValidityType .1.3.6.1.4.1.42229.1.2.5.3.2.1.5 |
pmDataLatestHistoryTableDefines the get-pm output of record performance data for latest history time SEQUENCE OF PmDataLatestHistoryEntry .1.3.6.1.4.1.42229.1.2.5.3.3 |
pmDataLatestHistoryEntryEntry of pmDataLatestHistoryTable PmDataLatestHistoryEntry .1.3.6.1.4.1.42229.1.2.5.3.3.1 |
pmDataLatestHistoryMonitoringDateTimeMonitoring data and time'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.5.3.3.1.1 |
pmDataLatestHistoryPmParameterPerformance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. CoriantPmtypesPmParameter .1.3.6.1.4.1.42229.1.2.5.3.3.1.2 |
pmDataLatestHistoryPmValuePM counter or gauge value of the PM parameter.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.5.3.3.1.3 |
pmDataLatestHistoryPmUnitUnit of PM value.ro CoriantCommonpmUnitOfValue .1.3.6.1.4.1.42229.1.2.5.3.3.1.4 |
pmDataLatestHistoryValidityIndicates whether or not a performance monitoring value is valid.ro CoriantPmtypesValidityType .1.3.6.1.4.1.42229.1.2.5.3.3.1.5 |
pmDataHistoryTableDefines the get-pm output of record performance data for history SEQUENCE OF PmDataHistoryEntry .1.3.6.1.4.1.42229.1.2.5.3.4 |
pmDataHistoryEntryEntry of pmDataHistoryTable PmDataHistoryEntry .1.3.6.1.4.1.42229.1.2.5.3.4.1 |
pmDataHistoryRecordIndexIndex of PM data records. Unsigned32 .1.3.6.1.4.1.42229.1.2.5.3.4.1.1 |
pmDataHistoryMonitoringDateTimeMonitoring data and time'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.5.3.4.1.2 |
pmDataHistoryPmParameterPerformance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. CoriantPmtypesPmParameter .1.3.6.1.4.1.42229.1.2.5.3.4.1.3 |
pmDataHistoryPmValuePM counter or gauge value of the PM parameter.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.5.3.4.1.4 |
pmDataHistoryPmUnitUnit of PM value.ro CoriantCommonpmUnitOfValue .1.3.6.1.4.1.42229.1.2.5.3.4.1.5 |
pmDataHistoryValidityIndicates whether or not a performance monitoring value is valid.ro CoriantPmtypesValidityType .1.3.6.1.4.1.42229.1.2.5.3.4.1.6 |
pmThresholdsValue OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.5.4 |
pmThresholdsValueTableThe list of entries of performance monitoring threshold value. SEQUENCE OF PmThresholdsValueEntry .1.3.6.1.4.1.42229.1.2.5.4.1 |
pmThresholdsValueEntryEntry of pmThresholdsValueTable PmThresholdsValueEntry .1.3.6.1.4.1.42229.1.2.5.4.1.1 |
pmThresholdsValuePmParameterPerformance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.ro CoriantPmtypesPmParameter .1.3.6.1.4.1.42229.1.2.5.4.1.1.1 |
pmThresholdsValuePmHighThresholdSpecifies the desired high threshold value of the selected performance monitoring parameter.ro CoriantCommonpmThresholdValue .1.3.6.1.4.1.42229.1.2.5.4.1.1.2 |
pmThresholdsValuePmLowThresholdSpecifies the desired low threshold value of the selected performance monitoring parameter.ro CoriantCommonpmThresholdValue .1.3.6.1.4.1.42229.1.2.5.4.1.1.3 |
pmThresholdsValuePmUnitThe unit of the performance monitoring value.ro CoriantCommonpmUnitOfValue .1.3.6.1.4.1.42229.1.2.5.4.1.1.4 |
networking OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6 |
networkingInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.1 |
networkingSourceAddressSelectModeSelect the source address for route next-hop entry. loopback-prefer mode select the numerically lowest address configured on loopback interfaces if exist, link-prefer mode select the address configured on the outgoing interface default value :link-preferro Enumeration .1.3.6.1.4.1.42229.1.2.6.1.1 |
interface OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.2 |
interfaceTableThe list of configured interfaces on the device. SEQUENCE OF InterfaceEntry .1.3.6.1.4.1.42229.1.2.6.2.1 |
interfaceEntryEntry of interfaceTable InterfaceEntry .1.3.6.1.4.1.42229.1.2.6.2.1.1 |
interfaceIfNameThe name of the interface.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.2.1.1.1 |
interfaceIfDescriptionA textual description of the interface.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.2.1.1.2 |
interfaceIfTypeThe type of the interface. Refer to http://www.iana.org/assignments/smi-numbersro Enumeration .1.3.6.1.4.1.42229.1.2.6.2.1.1.3 |
interfaceAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.6.2.1.1.4 |
interfaceOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.6.2.1.1.5 |
interfaceAvailStatusProvided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. Following available status indication shall be supported: Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy, Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'. Provided to qualify the operational, usage and/or administrative state attributes. The value of each status attribute may denote the presence of one or more particular conditions applicable to the resource.ro Bits .1.3.6.1.4.1.42229.1.2.6.2.1.1.6 |
interfaceAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.6.2.1.1.7 |
ethernet OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.3 |
ethernetTableThe Ethernet attributes of an Ethernet interface. SEQUENCE OF EthernetEntry .1.3.6.1.4.1.42229.1.2.6.3.1 |
ethernetEntryEntry of ethernetTable EthernetEntry .1.3.6.1.4.1.42229.1.2.6.3.1.1 |
ethernetAutoNegotiationAuto negotiation mode. default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.6.3.1.1.1 |
ethernetDuplexModeDuplex Mode; only valid if auto negotiation is disabled. default value :fullro CoriantTypesDuplexMode .1.3.6.1.4.1.42229.1.2.6.3.1.1.2 |
ethernetOperationalDuplexModeOperational duplex mode. default value :NAro CoriantTypesDuplexMode .1.3.6.1.4.1.42229.1.2.6.3.1.1.3 |
ethernetRateRequired Ethernet Rate; only valid if auto negotiation is disabled. default value :max-ratero CoriantTypesEthernetRate .1.3.6.1.4.1.42229.1.2.6.3.1.1.4 |
ethernetOperationalEthernetRateOperation ethernet rate. default value :NAro CoriantTypesEthernetRate .1.3.6.1.4.1.42229.1.2.6.3.1.1.5 |
ethernetFlowControlSpecifies the type of flow control to be supported. default value :tx-rxro CoriantTypesFlowControl .1.3.6.1.4.1.42229.1.2.6.3.1.1.6 |
ethernetOperationalFlowControlOperational flow control. default value :NAro CoriantTypesFlowControl .1.3.6.1.4.1.42229.1.2.6.3.1.1.7 |
ethernetMacAddressMAC Address of the port. default value :00:00:00:00:00:00ro IetfYangTypesMacAddress .1.3.6.1.4.1.42229.1.2.6.3.1.1.8 |
ethernetAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.6.3.1.1.9 |
ppp OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.4 |
pppTableNULL SEQUENCE OF PppEntry .1.3.6.1.4.1.42229.1.2.6.4.1 |
pppEntryEntry of pppTable PppEntry .1.3.6.1.4.1.42229.1.2.6.4.1.1 |
pppTypeSpecifies the link type associated with the ppp.ro Enumeration .1.3.6.1.4.1.42229.1.2.6.4.1.1.1 |
pppPfRefReference of the ppp profile.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.4.1.1.2 |
pppResourceRefReference of the lower layer resource associated with this interface.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.4.1.1.3 |
pppAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.6.4.1.1.4 |
ipv4 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.5 |
ipv4TableParameters for the IPv4 address family. SEQUENCE OF Ipv4Entry .1.3.6.1.4.1.42229.1.2.6.5.1 |
ipv4EntryEntry of ipv4Table Ipv4Entry .1.3.6.1.4.1.42229.1.2.6.5.1.1 |
ipv4ForwardingControls IPv4 packet forwarding of datagrams received by, but not addressed to, this interface. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). default value :truero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.5.1.1.1 |
ipv4MtuThe size, in octets, of the largest IPv4 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending on the interface's type. If this leaf is not configured, the operationally used MTU depends on the interface's type. UNITS:octetsro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.5.1.1.2 |
ipv4AddressAssignmentMethodIPv4 address assignment method. default value :staticro Enumeration .1.3.6.1.4.1.42229.1.2.6.5.1.1.3 |
ipAddress OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.6 |
ipAddressTableThe IPv4 address on the interface. SEQUENCE OF IpAddressEntry .1.3.6.1.4.1.42229.1.2.6.6.1 |
ipAddressEntryEntry of ipAddressTable IpAddressEntry .1.3.6.1.4.1.42229.1.2.6.6.1.1 |
ipAddressIpThe IPv4 address on the interface.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.6.6.1.1.1 |
ipAddressOriginThe origin of this address. default value :staticro Enumeration .1.3.6.1.4.1.42229.1.2.6.6.1.1.2 |
ipAddressPrefixLengthThe length of the subnet prefix.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.6.1.1.3 |
ipUnnumbered OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.7 |
ipUnnumberedTableThe IP unnumbered configurations. SEQUENCE OF IpUnnumberedEntry .1.3.6.1.4.1.42229.1.2.6.7.1 |
ipUnnumberedEntryEntry of ipUnnumberedTable IpUnnumberedEntry .1.3.6.1.4.1.42229.1.2.6.7.1.1 |
ipUnnumberedUnnumEnabledIndicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration. default value :falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.7.1.1.1 |
ipUnnumberedParentInterfaceReference of the parent interface of the unnumbered interface.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.7.1.1.2 |
routingProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.9 |
routingProtocolTableRouting protocol instance. SEQUENCE OF RoutingProtocolEntry .1.3.6.1.4.1.42229.1.2.6.9.1 |
routingProtocolEntryEntry of routingProtocolTable RoutingProtocolEntry .1.3.6.1.4.1.42229.1.2.6.9.1.1 |
routingProtocolRtpTypeThe type of the routing protocol instance.ro CoriantTypesRtpType .1.3.6.1.4.1.42229.1.2.6.9.1.1.1 |
routingProtocolRtpNameThe name of the routing protocol instance. For system-controlled instances this name is persistent, i.e., it SHOULD NOT change across reboots.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.9.1.1.2 |
routingProtocolDescriptionTextual description of the routing protocol instance.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.9.1.1.3 |
staticRoute OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.10 |
staticRouteTableA list of static routes. SEQUENCE OF StaticRouteEntry .1.3.6.1.4.1.42229.1.2.6.10.1 |
staticRouteEntryEntry of staticRouteTable StaticRouteEntry .1.3.6.1.4.1.42229.1.2.6.10.1.1 |
staticRouteDestinationPrefixIPv4 destination prefix.ro IetfInetTypesIpv4Prefix .1.3.6.1.4.1.42229.1.2.6.10.1.1.1 |
staticRouteDescriptionTextual description of the static route.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.10.1.1.2 |
staticRouteAdvertisedWhen set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is configured as an ASBR. default value :falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.10.1.1.3 |
nextHop OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.11 |
nextHopTableConfiguration of static next-hop. SEQUENCE OF NextHopEntry .1.3.6.1.4.1.42229.1.2.6.11.1 |
nextHopEntryEntry of nextHopTable NextHopEntry .1.3.6.1.4.1.42229.1.2.6.11.1.1 |
nextHopIndexAn user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than for referencing the entry.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.11.1.1.1 |
nextHopOutgoingInterfaceReference of the outgoing interface.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.11.1.1.2 |
nextHopAddressIPv4 address of the next-hop.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.6.11.1.1.3 |
nextHopMetricmetric of the next-hop. default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.11.1.1.4 |
ospf OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.12 |
ospfTableOSPF protocol. SEQUENCE OF OspfEntry .1.3.6.1.4.1.42229.1.2.6.12.1 |
ospfEntryEntry of ospfTable OspfEntry .1.3.6.1.4.1.42229.1.2.6.12.1.1 |
ospfRouterIdOSPF Router ID.ro IetfYangTypesDottedQuad .1.3.6.1.4.1.42229.1.2.6.12.1.1.1 |
ospfDescriptionTextual description of the OSPF instance.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.12.1.1.2 |
ospfAsbrOSPF Autonomous System Boundary Router. default value :truero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.12.1.1.3 |
ospfAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.6.12.1.1.4 |
ospfOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.6.12.1.1.5 |
ospfAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.6.12.1.1.6 |
ospfArea OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.13 |
ospfAreaTableConfiguration of ospf area. SEQUENCE OF OspfAreaEntry .1.3.6.1.4.1.42229.1.2.6.13.1 |
ospfAreaEntryEntry of ospfAreaTable OspfAreaEntry .1.3.6.1.4.1.42229.1.2.6.13.1.1 |
ospfAreaIdOSPF Router Area ID.ro IetfYangTypesDottedQuad .1.3.6.1.4.1.42229.1.2.6.13.1.1.1 |
ospfAreaAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.6.13.1.1.2 |
ospfAreaOperStatusThe operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature. The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values: Down: The resource is totally inoperable and unable to provide service to the user(s) Up: The resource is partially or fully operable and available for use. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.6.13.1.1.3 |
ospfAreaAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.6.13.1.1.4 |
ospfAreaTypeOSPF Router Area Type. default value :normalro Enumeration .1.3.6.1.4.1.42229.1.2.6.13.1.1.5 |
ospfInterface OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.14 |
ospfInterfaceTableConfiguration of interface in an ospf area. SEQUENCE OF OspfInterfaceEntry .1.3.6.1.4.1.42229.1.2.6.14.1 |
ospfInterfaceEntryEntry of ospfInterfaceTable OspfInterfaceEntry .1.3.6.1.4.1.42229.1.2.6.14.1.1 |
ospfInterfaceOspfIfNameReference of the interface in OSPF area.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.14.1.1.1 |
ospfInterfaceOspfLinkpfReference of the ospf link profile associated with the interface.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.14.1.1.2 |
ospfInterfaceOspfCostOSPF link cost.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.14.1.1.3 |
ospfInterfaceOspfIfRoutingSpecifies if Routing is enabled and if so, if Routing is passive or active. ACTIVE - This link is advertised and routing messages are transported over this link. PASSIVE - This link is advertised, routing messages are not transported over this link. default value :activero Enumeration .1.3.6.1.4.1.42229.1.2.6.14.1.1.4 |
ospfInterfaceOspfNetworkTypeOSPF Interface Network Types.ro Enumeration .1.3.6.1.4.1.42229.1.2.6.14.1.1.5 |
ospfAdjacency OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.15 |
ospfAdjacencyTableattributes of OSPF adjacency. SEQUENCE OF OspfAdjacencyEntry .1.3.6.1.4.1.42229.1.2.6.15.1 |
ospfAdjacencyEntryEntry of ospfAdjacencyTable OspfAdjacencyEntry .1.3.6.1.4.1.42229.1.2.6.15.1.1 |
ospfAdjacencyOspfNeighborAddressneighbor IP address of the OSPF adjacency.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.6.15.1.1.1 |
ospfAdjacencyNeighborRouterIdOSPF neighbor Router ID.ro IetfYangTypesDottedQuad .1.3.6.1.4.1.42229.1.2.6.15.1.1.2 |
ospfAdjacencyOspfAdjStatusOSPF adjacency status.ro Enumeration .1.3.6.1.4.1.42229.1.2.6.15.1.1.3 |
rib OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.16 |
ribTableEach entry represents a RIB identified by the 'name' key. All routes in a RIB MUST belong to the same address family. For each routing instance, an implementation SHOULD provide one system-controlled default RIB for each supported address family. SEQUENCE OF RibEntry .1.3.6.1.4.1.42229.1.2.6.16.1 |
ribEntryEntry of ribTable RibEntry .1.3.6.1.4.1.42229.1.2.6.16.1.1 |
ribNameThe name of the RIB.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.16.1.1.1 |
ribAddressFamilyAddress family.ro Enumeration .1.3.6.1.4.1.42229.1.2.6.16.1.1.2 |
ribDefaultRibThis flag has the value of 'true' if and only if the RIB is the default RIB for the given address family. A default RIB always receives direct routes. By default it also receives routes from all routing protocols. default value :truero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.16.1.1.3 |
ribDescriptionTextual description of the RIB.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.16.1.1.4 |
route OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.17 |
routeTableA list of static routes. SEQUENCE OF RouteEntry .1.3.6.1.4.1.42229.1.2.6.17.1 |
routeEntryEntry of routeTable RouteEntry .1.3.6.1.4.1.42229.1.2.6.17.1.1 |
routeSourceProtocolType of the routing protocol from which the route originated.ro CoriantTypesSourceProtocol .1.3.6.1.4.1.42229.1.2.6.17.1.1.1 |
routeDestinationPrefixIPv4 destination prefix.ro IetfInetTypesIpv4Prefix .1.3.6.1.4.1.42229.1.2.6.17.1.1.2 |
routeDescriptionTextual description of the route.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.17.1.1.3 |
routePreferenceThis route attribute, also known as administrative distance, allows for selecting the preferred route among routes with the same destination prefix. A smaller value means a more preferred route.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.17.1.1.4 |
routeActiveIndicates that the route is preferred among all routes in the same RIB that have the same destination prefix.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.17.1.1.5 |
profiles OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.18 |
pppProfile OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.18.1 |
pppProfileTableProfile for the point-to-point interface. SEQUENCE OF PppProfileEntry .1.3.6.1.4.1.42229.1.2.6.18.1.1 |
pppProfileEntryEntry of pppProfileTable PppProfileEntry .1.3.6.1.4.1.42229.1.2.6.18.1.1.1 |
pppProfilePppPfNameThe name of the point-to-point protocol profile.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.18.1.1.1.1 |
pppProfilePppFcsLengthSpecifies whether the frame check sequence is a 16-bit or 32-bit value. default value :16ro Enumeration .1.3.6.1.4.1.42229.1.2.6.18.1.1.1.2 |
pppProfilePppMruSpecifies the maximum number of octets in the Information and Padding fields. UNITS:octets default value :1500ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.18.1.1.1.3 |
pppProfilePppRestartTimerSpecifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.18.1.1.1.4 |
pppProfilePppMaxFailureSpecifies the maximum failure value of the PPP protocol profile. default value :5ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.18.1.1.1.5 |
ospfLinkProfile OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.18.2 |
ospfLinkProfileTableProfile for the OSPF protocol link. SEQUENCE OF OspfLinkProfileEntry .1.3.6.1.4.1.42229.1.2.6.18.2.1 |
ospfLinkProfileEntryEntry of ospfLinkProfileTable OspfLinkProfileEntry .1.3.6.1.4.1.42229.1.2.6.18.2.1.1 |
ospfLinkProfileOspfLinkpfNameThe name of the OSPF protocol link profile.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.6.18.2.1.1.1 |
ospfLinkProfileHelloIntervalSpecifies the Hello Interval in seconds. UNITS:seconds default value :10ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.18.2.1.1.2 |
ospfLinkProfileRouterDeadIntervalSpecifies the Router Dead Interval in seconds. UNITS:seconds default value :40ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.18.2.1.1.3 |
ospfLinkProfileRetransmissionIntervalSpecifies the Retransmission Interval in seconds. UNITS:seconds default value :5ro Unsigned32 .1.3.6.1.4.1.42229.1.2.6.18.2.1.1.4 |
oscx OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.6.19 |
oscxTableOSCX (Optical Supervisory Channel Extended) interface SEQUENCE OF OscxEntry .1.3.6.1.4.1.42229.1.2.6.19.1 |
oscxEntryEntry of oscxTable OscxEntry .1.3.6.1.4.1.42229.1.2.6.19.1.1 |
oscxChannelSpecifies the OSCX channel within the Optical Supervisory Channel.ro Enumeration .1.3.6.1.4.1.42229.1.2.6.19.1.1.1 |
oscxResourceRefReference of the lower layer resource associated with this interface.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.6.19.1.1.2 |
oscxAliasNameUser defined alias for this entity. Must be an alphanumeric string with dash or underscorero OCTET STRING .1.3.6.1.4.1.42229.1.2.6.19.1.1.3 |
security OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7 |
securityInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.1 |
securitySshPublicKeyThe system's public key for use with SSH or SFTP.This is a leaf list, encode by some leafs.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.1.1 |
securitySshPublicKeyFingerprintThe fingerprint of the system's public key.This is a leaf list, encode by some leafs.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.1.2 |
securityPreLoginMessageWelcome message displayed before user login default value :****************************************** Warning ****************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. *********************************************************************************************ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.1.3 |
securityWarningMessageWelcome message displayed after user login default value :****************************************** Warning ****************************************** This system is restricted to authorized users for business purposes. Unauthorized access is a violation of the law. This service may be monitored for administrative and security reasons. By proceeding, you consent to this monitoring. *********************************************************************************************ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.1.4 |
securityAaaAuthenticationMethodspecify authentication method for the user login to the NE. default value :local-onlyro Enumeration .1.3.6.1.4.1.42229.1.2.7.1.5 |
securitySystemFipsspecifies whether the system security is operating in compliance with FIPS. default value :disabledro Enumeration .1.3.6.1.4.1.42229.1.2.7.1.6 |
securityHttpSupportDefines whether unsecure HTTP protocol is allowed; includes file transfer, or any other application that uses HTTP default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.7.1.7 |
user OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.2 |
userTableNULL SEQUENCE OF UserEntry .1.3.6.1.4.1.42229.1.2.7.2.1 |
userEntryEntry of userTable UserEntry .1.3.6.1.4.1.42229.1.2.7.2.1.1 |
userNameUser name.ro CoriantTypesUserName .1.3.6.1.4.1.42229.1.2.7.2.1.1.1 |
userPasswordThe password of the user.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.2.1.1.2 |
userClassThe access class for the user. default value :supervisionro Enumeration .1.3.6.1.4.1.42229.1.2.7.2.1.1.3 |
userMaxInvalidLoginThis attribute is the maximum number of consecutive and invalid login attempts before an account is suspended (lockedout). default value :3ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.2.1.1.4 |
userSuspensionTimeThis attribute is the duration of UID suspension following consecutive invalid login attempts. Setting the value to 0 disables this attribute. UNITS:seconds default value :60ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.2.1.1.5 |
userTimeoutThis attribute is the Session Time Out Interval. If there are no messages between the user and the NE over the Time Out interval, the session is logged off. Setting the value to 0 disables this attribute (meaning the session will not time out). UNITS:minutes default value :30ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.2.1.1.6 |
userPasswordAgingIntervalThis attribute is the Password Aging Interval. Setting the value to 0 disables this attribute. UNITS:days default value :0ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.2.1.1.7 |
userPasswordExpirationDateThis attribute shows the password expiration date.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.7.2.1.1.8 |
userAdminStatusThe attribute allows administrators to modify the user administration status. default value :enabledro Enumeration .1.3.6.1.4.1.42229.1.2.7.2.1.1.9 |
userStatusThis attribute shows the user status. User with status 'enabled' will have access to the system. User with status 'disabled' not have access to the system. User with status 'password-aged' will have access to the system but will be forced to change his password on first-time login. User with status 'lockout' means the account is locked out due to unsuccessful login attempts. default value :disabledro Enumeration .1.3.6.1.4.1.42229.1.2.7.2.1.1.10 |
userMaxSessionsThis attribute specifies the maximum number of sessions allowed for this user. default value :6ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.2.1.1.11 |
userLastLoginDateThe last login date/time of the user. default value :1970-01-01T00:00:00Zro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.7.2.1.1.12 |
userAaaTypeIndicates the authentication method of the user. default value :localro Enumeration .1.3.6.1.4.1.42229.1.2.7.2.1.1.13 |
session OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.3 |
sessionTableNULL SEQUENCE OF SessionEntry .1.3.6.1.4.1.42229.1.2.7.3.1 |
sessionEntryEntry of sessionTable SessionEntry .1.3.6.1.4.1.42229.1.2.7.3.1.1 |
sessionIdSpecifies a unique identifier of the current session. It indicates the IP address and transport layer port number associated with this session. If the session is initiated from the serial port, the value is 'NA'.ro CoriantTypesSessionId .1.3.6.1.4.1.42229.1.2.7.3.1.1.1 |
sessionUserPoints to a user instance.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.7.3.1.1.2 |
sessionTypeSession type.ro Enumeration .1.3.6.1.4.1.42229.1.2.7.3.1.1.3 |
sessionProtocolIndicates which protocol has been used to establish the session.ro Enumeration .1.3.6.1.4.1.42229.1.2.7.3.1.1.4 |
sessionCreatedTimeThe timestamp the user has created this session.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.7.3.1.1.5 |
aaaServer OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.4 |
aaaServerTableNULL SEQUENCE OF AaaServerEntry .1.3.6.1.4.1.42229.1.2.7.4.1 |
aaaServerEntryEntry of aaaServerTable AaaServerEntry .1.3.6.1.4.1.42229.1.2.7.4.1.1 |
aaaServerServerNamespecify the name of aaa server.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.4.1.1.1 |
aaaServerServerPriorityThis is used to sort the servers in the order of precedence.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.4.1.1.2 |
aaaServerProtocolSupportedspecify the protocol used for AAA. default value :TACACSPLUSro Enumeration .1.3.6.1.4.1.42229.1.2.7.4.1.1.3 |
aaaServerServerIpThe IPv4 address of AAA server.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.7.4.1.1.4 |
aaaServerServerPortAAA server port number. default value :49ro IetfInetTypesPortNumber .1.3.6.1.4.1.42229.1.2.7.4.1.1.5 |
aaaServerSharedSecretThe shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkeyro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.4.1.1.6 |
aaaServerRoleSupportedspecify the role of the server for AAA. default value :authentication authorizationro Bits .1.3.6.1.4.1.42229.1.2.7.4.1.1.7 |
aaaServerAdminStatusThe administrative state specifes the permission to use or prohibition against using the resource. The administrative state can be modified by the user. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.7.4.1.1.8 |
aaaServerTimeOutSpecifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.4.1.1.9 |
aaaServerRetrySpecifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.4.1.1.10 |
keySyncSession OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.5 |
keySyncSessionTableTLS session to synchronize ODU encryption key. SEQUENCE OF KeySyncSessionEntry .1.3.6.1.4.1.42229.1.2.7.5.1 |
keySyncSessionEntryEntry of keySyncSessionTable KeySyncSessionEntry .1.3.6.1.4.1.42229.1.2.7.5.1.1 |
keySyncSessionIdSpecifies a unique identifier of the key synchronization session.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.5.1.1.1 |
keySyncSessionAdminStatusThe administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.7.5.1.1.2 |
keySyncSessionSessionStatusIndicating the status of key sync session.ro Enumeration .1.3.6.1.4.1.42229.1.2.7.5.1.1.4 |
keySyncSessionRemoteIpThe IP address of remote session server.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.7.5.1.1.5 |
keySyncSessionRemotePortThe port number of remote session server. default value :8443ro IetfInetTypesPortNumber .1.3.6.1.4.1.42229.1.2.7.5.1.1.6 |
keySyncSessionLocalIpThe source IP address of a manual session.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.7.5.1.1.7 |
keySyncSessionLocalPortThe source port number of a manual session.ro IetfInetTypesPortNumber .1.3.6.1.4.1.42229.1.2.7.5.1.1.8 |
keySyncSessionSourceAddressFromspecifies the interface of the source IP address of the outgoing packets. Conditions:../key-sync-session-type = 'manual' default value :autoro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.5.1.1.9 |
keySyncSessionConnectedTimeThe timestamp the user has created this session.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.7.5.1.1.10 |
keySyncSessionTypeIndicating the type of key sync session, 'manual' is for the session user configured, and 'auto' is for the session automatically created by system. default value :manualro Enumeration .1.3.6.1.4.1.42229.1.2.7.5.1.1.11 |
keySyncSessionAuthTypeIndicating the authentication type of the key sync session. default value :proprietary-pskro Enumeration .1.3.6.1.4.1.42229.1.2.7.5.1.1.12 |
keySyncSessionLocalCertificatePreviously installed certificate that authenticates the NE. default value :nonero OCTET STRING .1.3.6.1.4.1.42229.1.2.7.5.1.1.13 |
pskMap OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.7 |
pskMapTableNULL SEQUENCE OF PskMapEntry .1.3.6.1.4.1.42229.1.2.7.7.1 |
pskMapEntryEntry of pskMapTable PskMapEntry .1.3.6.1.4.1.42229.1.2.7.7.1.1 |
pskMapPskIdentityThe PSK identity encoded as a UTF-8 string. For details how certain common PSK identity formats can be encoded in UTF-8, see section 5.1. of RFC 4279.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.7.1.1.1 |
pskMapKeyThe key associated with the PSK identityro IetfYangTypesHexString .1.3.6.1.4.1.42229.1.2.7.7.1.1.2 |
pskMapPskStatusStatus of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is updating; psk-map cannot be updated and previous psk-map updating cannot be cancelled if psk-status is candidate-key-authenticate. default value :initro Enumeration .1.3.6.1.4.1.42229.1.2.7.7.1.1.4 |
pskMapPskInfoThe label of the psk-map. default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.7.1.1.5 |
pskMapWarningTimerWarning Time before psk-map updating completes. UNITS:minutes default value :5ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.7.1.1.6 |
pskMapCriticalTimerCritical time before psk-map updating completes. UNITS:minutes default value :30ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.7.1.1.7 |
pskMapTrafficOffTimerTraffic off time before psk-map updating completes. UNITS:minutes default value :1440ro Unsigned32 .1.3.6.1.4.1.42229.1.2.7.7.1.1.8 |
pskMapEffectiveTimestampIndicates the Time of new psk starts to take effect.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.7.7.1.1.9 |
key OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.9 |
keyTableA key maintained by the keystore. SEQUENCE OF KeyEntry .1.3.6.1.4.1.42229.1.2.7.9.1 |
keyEntryEntry of keyTable KeyEntry .1.3.6.1.4.1.42229.1.2.7.9.1.1 |
keyNameAn arbitrary name for the key.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.9.1.1.1 |
keyAlgorithmIdentifierIdentifies which algorithm is to be used with the key. This value determines how the 'private-key' and 'public-key' fields are interpreted.ro Enumeration .1.3.6.1.4.1.42229.1.2.7.9.1.1.2 |
keyPublicKeyA binary string that contains the value of the public key. The interpretation of the content is defined in the registration of the key algorithm. For example, a DSA key is an INTEGER, an RSA key is represented as RSAPublicKey as defined in [RFC3447], and an Elliptic Curve Cryptography (ECC) key is represented using the 'publicKey' described in [RFC5915]ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.9.1.1.3 |
certificate OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.10 |
certificateTableA certificate for this private key. SEQUENCE OF CertificateEntry .1.3.6.1.4.1.42229.1.2.7.10.1 |
certificateEntryEntry of certificateTable CertificateEntry .1.3.6.1.4.1.42229.1.2.7.10.1.1 |
certificateNameAn arbitrary name for the certificate. The name must be a unique across all keys, not just within this key.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.1 |
certificateVersionversion of the certificate. default value :x509v1ro Enumeration .1.3.6.1.4.1.42229.1.2.7.10.1.1.2 |
certificateSerialNumberserial number of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.3 |
certificateSignatureAlgorithmsignature algorithm of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.4 |
certificateIssuerissuer of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.5 |
certificateValidFromvalid-from date and time of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.6 |
certificateValidTovalid-to date and time of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.7 |
certificateSubjectsubject of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.8 |
certificatePublicKeyAlgorithmpublic-key-algorithm of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.10.1.1.9 |
trustedCertificateGroup OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.11 |
trustedCertificateGroupTableA list of trusted certificates. These certificates can be used by a server to authenticate clients, or by clients to authenticate servers. The certificates may be endpoint specific or for certificate authorities, to authenticate many clients at once. Each list of certificates SHOULD be specific to a purpose, as the list as a whole may be referenced by other modules. For instance, a NETCONF server model might point to a list of certificates to use when authenticating client certificates. SEQUENCE OF TrustedCertificateGroupEntry .1.3.6.1.4.1.42229.1.2.7.11.1 |
trustedCertificateGroupEntryEntry of trustedCertificateGroupTable TrustedCertificateGroupEntry .1.3.6.1.4.1.42229.1.2.7.11.1.1 |
trustedCertificateGroupNameAn arbitrary name for this list of trusted certificates.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.11.1.1.1 |
trustedCertificate OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.7.12 |
trustedCertificateTableA trusted certificate for a specific use. Note, this 'certificate' is a list in order to encode any associated intermediate certificates. SEQUENCE OF TrustedCertificateEntry .1.3.6.1.4.1.42229.1.2.7.12.1 |
trustedCertificateEntryEntry of trustedCertificateTable TrustedCertificateEntry .1.3.6.1.4.1.42229.1.2.7.12.1.1 |
trustedCertificateNameAn arbitrary name for this trusted certificate. Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from another module can resolve to unique values.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.1 |
trustedCertificateVersionversion of the certificate. default value :x509v1ro Enumeration .1.3.6.1.4.1.42229.1.2.7.12.1.1.2 |
trustedCertificateSerialNumberserial number of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.3 |
trustedCertificateSignatureAlgorithmsignature algorithm of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.4 |
trustedCertificateIssuerissuer of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.5 |
trustedCertificateValidFromvalid-from date and time of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.6 |
trustedCertificateValidTovalid-to date and time of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.7 |
trustedCertificateSubjectsubject of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.8 |
trustedCertificatePublicKeyAlgorithmpublic-key-algorithm of the certificate.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.7.12.1.1.9 |
nbi OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8 |
snmp OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.1 |
snmpv3 OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.1.1 |
snmpv3TableSNMPv3 configuration for user SEQUENCE OF Snmpv3Entry .1.3.6.1.4.1.42229.1.2.8.1.1.1 |
snmpv3EntryEntry of snmpv3Table Snmpv3Entry .1.3.6.1.4.1.42229.1.2.8.1.1.1.1 |
snmpv3UserSecLevelSpecifies the SNMPv3 user security level. default value :no-auth-no-privro Enumeration .1.3.6.1.4.1.42229.1.2.8.1.1.1.1.1 |
snmpv3AuthProtocolSpecifies the authentication protocol that the SNMPv3 user being created will use. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') default value :SHAro Enumeration .1.3.6.1.4.1.42229.1.2.8.1.1.1.1.2 |
snmpv3AuthPassphraseSpecifies the SNMPv3 authentication pass phrase. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv')ro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.1.1.1.1.3 |
snmpv3PrivProtocolSpecifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AESro Enumeration .1.3.6.1.4.1.42229.1.2.8.1.1.1.1.4 |
snmpv3PrivPassphraseSpecifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv'ro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.1.1.1.1.5 |
snmpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.1.2 |
snmpEngineIdsnmp EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the Engine ID will be the first MAC address of the MAC addresses Pool of the NE.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.1.2.1 |
snmpCommunity OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.1.3 |
snmpCommunityTableList of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO. SEQUENCE OF SnmpCommunityEntry .1.3.6.1.4.1.42229.1.2.8.1.3.1 |
snmpCommunityEntryEntry of snmpCommunityTable SnmpCommunityEntry .1.3.6.1.4.1.42229.1.2.8.1.3.1.1 |
snmpCommunityCommunityStringCommunity String.ro CoriantTypesSnmpString .1.3.6.1.4.1.42229.1.2.8.1.3.1.1.1 |
snmpCommunityCommunityStringAccesssnmp access right of this community string. default value :read-onlyro Enumeration .1.3.6.1.4.1.42229.1.2.8.1.3.1.1.2 |
snmpTarget OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.1.4 |
snmpTargetTableList of SNMP targets (trap listeners) SEQUENCE OF SnmpTargetEntry .1.3.6.1.4.1.42229.1.2.8.1.4.1 |
snmpTargetEntryEntry of snmpTargetTable SnmpTargetEntry .1.3.6.1.4.1.42229.1.2.8.1.4.1.1 |
snmpTargetSnmpVersionsnmp version. default value :v2cro Enumeration .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.1 |
snmpTargetSnmpv3UserIndicate the snmpv3 user. Conditions:../snmp-version = 'v3'ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.2 |
snmpTargetTargetNameIdentifies the SNMP targetro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.3 |
snmpTargetTargetIpIP address of the SNMP targetro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.4 |
snmpTargetTargetPortUDP port number. default value :162ro IetfInetTypesPortNumber .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.5 |
snmpTargetTargetTransportType of transport for the SNMP target default value :udpro Enumeration .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.6 |
snmpTargetTrapCommunityStringCommunity string used for SNMP traps Conditions:../snmp-version = 'v2c' default value :groovero CoriantTypesSnmpString .1.3.6.1.4.1.42229.1.2.8.1.4.1.1.7 |
cli OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.2 |
cliConfig OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.2.1 |
cliConfigTableNULL SEQUENCE OF CliConfigEntry .1.3.6.1.4.1.42229.1.2.8.2.1.1 |
cliConfigEntryEntry of cliConfigTable CliConfigEntry .1.3.6.1.4.1.42229.1.2.8.2.1.1.1 |
cliConfigCliLinesNumber of rows to be used for display. This value is automatically discovered when possible default value :40ro Unsigned32 .1.3.6.1.4.1.42229.1.2.8.2.1.1.1.1 |
cliConfigCliColumnsNumber of columns to be used for display. This value is automatically discovered when possible default value :140ro Unsigned32 .1.3.6.1.4.1.42229.1.2.8.2.1.1.1.2 |
cliConfigMaxHistorySizeCommand history maximum size for the current session default value :500ro Unsigned32 .1.3.6.1.4.1.42229.1.2.8.2.1.1.1.3 |
cliConfigInteractiveModeThis determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled = CLI will prompt user (default) Disabled = CLI will suppress any prompt to the user This parameter is set per CLI session and is not persistent. default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.8.2.1.1.1.4 |
restconf OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.3 |
restconfRestHttpSupportDefines if the HTTP port (8080) is enabled for RESTCONF default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.8.3.1 |
restconfRestHttpsSupportDefines if the HTTPS port (8181) is enabled for RESTCONF default value :enabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.8.3.2 |
restconfRestSessionTimeoutTimeout of a cookie based RESTCONF session. The cookie expiration date is reset every time there is activity on the session. UNITS:minutes default value :5ro Unsigned32 .1.3.6.1.4.1.42229.1.2.8.3.3 |
cliAlias OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.4 |
cliAliasTableList of aliases used in CLI. Can only be accessed via 'alias/unalias' CLI commands. SEQUENCE OF CliAliasEntry .1.3.6.1.4.1.42229.1.2.8.4.1 |
cliAliasEntryEntry of cliAliasTable CliAliasEntry .1.3.6.1.4.1.42229.1.2.8.4.1.1 |
cliAliasNameName of the aliasro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.4.1.1.1 |
cliAliasValueValue of the aliasro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.4.1.1.2 |
cliScript OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.8.5 |
cliScriptTableList of available CLI scripts. Scripts can be executed with the 'run' command SEQUENCE OF CliScriptEntry .1.3.6.1.4.1.42229.1.2.8.5.1 |
cliScriptEntryEntry of cliScriptTable CliScriptEntry .1.3.6.1.4.1.42229.1.2.8.5.1.1 |
cliScriptScriptNameFile name of the CLI scriptro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.5.1.1.1 |
cliScriptDescriptionDescription of the CLI scriptro OCTET STRING .1.3.6.1.4.1.42229.1.2.8.5.1.1.2 |
filesw OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9 |
softwareload OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.2 |
softwareloadTableThe list of the software loads in the system. SEQUENCE OF SoftwareloadEntry .1.3.6.1.4.1.42229.1.2.9.2.1 |
softwareloadEntryEntry of softwareloadTable SoftwareloadEntry .1.3.6.1.4.1.42229.1.2.9.2.1.1 |
softwareloadSwloadIdsoftware load identifier which is uniquely identify specific software load.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.9.2.1.1.1 |
softwareloadSwloadStateIndicates the state of the software load.ro Enumeration .1.3.6.1.4.1.42229.1.2.9.2.1.1.2 |
softwareloadSwloadVersionIndicates the software version of the software load.ro CoriantFileSwTypesSwVersion .1.3.6.1.4.1.42229.1.2.9.2.1.1.3 |
softwareloadSwloadVendorVendor information of the software load.ro CoriantFileSwTypesSwloadVendor .1.3.6.1.4.1.42229.1.2.9.2.1.1.4 |
softwareloadSwloadProductIndicates the network element family this software belongs to.ro CoriantFileSwTypesSwloadProduct .1.3.6.1.4.1.42229.1.2.9.2.1.1.5 |
softwareloadSwloadLabelThe label of the software load including summary information.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.9.2.1.1.6 |
database OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.3 |
databaseTableThe list of the databases in the system. SEQUENCE OF DatabaseEntry .1.3.6.1.4.1.42229.1.2.9.3.1 |
databaseEntryEntry of databaseTable DatabaseEntry .1.3.6.1.4.1.42229.1.2.9.3.1.1 |
databaseIddatabase identifier which is uniquely identify specific database.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.9.3.1.1.1 |
databaseStateIndicates the state of the database.ro Enumeration .1.3.6.1.4.1.42229.1.2.9.3.1.1.2 |
databaseVersionIndicates the database version.ro CoriantFileSwTypesSwVersion .1.3.6.1.4.1.42229.1.2.9.3.1.1.3 |
databaseVendorVendor information of the database.ro CoriantFileSwTypesSwloadVendor .1.3.6.1.4.1.42229.1.2.9.3.1.1.4 |
databaseProductIndicates the network element family this database belongs to.ro CoriantFileSwTypesSwloadProduct .1.3.6.1.4.1.42229.1.2.9.3.1.1.5 |
databaseBackupTimeIndicates the database last backup time. default value :ro OCTET STRING .1.3.6.1.4.1.42229.1.2.9.3.1.1.6 |
fwVersionMap OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.4 |
fwVersionMapTableThe firmware information of the upgradable devices included in the software load. SEQUENCE OF FwVersionMapEntry .1.3.6.1.4.1.42229.1.2.9.4.1 |
fwVersionMapEntryEntry of fwVersionMapTable FwVersionMapEntry .1.3.6.1.4.1.42229.1.2.9.4.1.1 |
fwVersionMapDeviceNameIndicates the name of the device.ro CoriantFileSwTypesDeviceName .1.3.6.1.4.1.42229.1.2.9.4.1.1.1 |
fwVersionMapDeviceFwVersionIndicates the version of the firmware.ro CoriantFileSwTypesDeviceFwVersion .1.3.6.1.4.1.42229.1.2.9.4.1.1.2 |
currentFwVersion OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.5 |
currentFwVersionTableThe firmware information of the upgradable devices included in the software load. SEQUENCE OF CurrentFwVersionEntry .1.3.6.1.4.1.42229.1.2.9.5.1 |
currentFwVersionEntryEntry of currentFwVersionTable CurrentFwVersionEntry .1.3.6.1.4.1.42229.1.2.9.5.1.1 |
currentFwVersionEquipmentEntityIndicates the entity of the equipment carrying the device.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.9.5.1.1.1 |
currentFwVersionFwEquipmentTypeIndicates the type of the equipment carrying the device.ro CoriantTypesEquipmentType .1.3.6.1.4.1.42229.1.2.9.5.1.1.2 |
currentFwVersionDeviceNameIndicates the name of the device.ro CoriantFileSwTypesDeviceName .1.3.6.1.4.1.42229.1.2.9.5.1.1.3 |
currentFwVersionDeviceFwVersionIndicates the version of the firmware.ro CoriantFileSwTypesDeviceFwVersion .1.3.6.1.4.1.42229.1.2.9.5.1.1.4 |
currentFwVersionFwStateIndicates firmware state of the device. Current: indicates the loaded firmware is the version of current software load. Not-current: indicates the loaded firmware is not the version of current software load. default value :not-availablero Enumeration .1.3.6.1.4.1.42229.1.2.9.5.1.1.5 |
rollbackPoint OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.6 |
rollbackPointTableRepresents a rollback point stored in the system. A rollback point represents the system configuration of a specific point in time, that the user may create with the 'create-rollback-point' command, visualize with the 'diff' command' and rollback to with the 'rollback' command. The system is able to store up to 10 rollback-points, rolling over old instances as new ones are created. The incremental IDs of 1..10 are automatically generated by the system whenever the rollback-point is created. Rollback points can be deleted as any normal object. A special 'backup' rollback-point can also be created with ID 0; unlike normal rollback-points, this instance will be kept even after activation with the 'rollback' RPC. SEQUENCE OF RollbackPointEntry .1.3.6.1.4.1.42229.1.2.9.6.1 |
rollbackPointEntryEntry of rollbackPointTable RollbackPointEntry .1.3.6.1.4.1.42229.1.2.9.6.1.1 |
rollbackPointIdInteger ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100ro Unsigned32 .1.3.6.1.4.1.42229.1.2.9.6.1.1.1 |
rollbackPointCreationTimeTimestamp when this rollback-point was createdro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.9.6.1.1.2 |
rollbackPointCreationTriggerDescribes the author user-name of this rollback-pointro CoriantTypesUserName .1.3.6.1.4.1.42229.1.2.9.6.1.1.3 |
rollbackPointDescriptionUser defined description of this rollback-pointro OCTET STRING .1.3.6.1.4.1.42229.1.2.9.6.1.1.4 |
rollbackPointTypeThe type of the rollback-point default value :normalro Enumeration .1.3.6.1.4.1.42229.1.2.9.6.1.1.5 |
logServer OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.8 |
logServerTableGrouping the configuration parameters for log forwarding. SEQUENCE OF LogServerEntry .1.3.6.1.4.1.42229.1.2.9.8.1 |
logServerEntryEntry of logServerTable LogServerEntry .1.3.6.1.4.1.42229.1.2.9.8.1.1 |
logServerNameThe name for the endpoint to forwarding logs to.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.9.8.1.1.1 |
logServerIpAddressThe leaf uniquely specifies the ipv4 address of the remote host.ro IetfInetTypesIpv4Address .1.3.6.1.4.1.42229.1.2.9.8.1.1.2 |
logServerTransportIt is the transport protocol used when forwarding logs. default value :udpro Enumeration .1.3.6.1.4.1.42229.1.2.9.8.1.1.3 |
logServerPortThis leaf specifies the port number used to deliver messages to the remote server. default value :514ro IetfInetTypesPortNumber .1.3.6.1.4.1.42229.1.2.9.8.1.1.4 |
logServerDestinationFacilityTypeSwitching of the function destination-facility default value :disabledro CoriantTypesEnableSwitch .1.3.6.1.4.1.42229.1.2.9.8.1.1.5 |
logServerDestinationFacilityThis leaf specifies the facility used in messages delivered to the remote server. default value :23ro OCTET STRING .1.3.6.1.4.1.42229.1.2.9.8.1.1.6 |
logFacility OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.9.10 |
logFacilityTableNULL SEQUENCE OF LogFacilityEntry .1.3.6.1.4.1.42229.1.2.9.10.1 |
logFacilityEntryEntry of logFacilityTable LogFacilityEntry .1.3.6.1.4.1.42229.1.2.9.10.1.1 |
logFacilityLogSelectorFacilityThe leaf uniquely identifies a syslog facility for forwarding.ro Enumeration .1.3.6.1.4.1.42229.1.2.9.10.1.1.1 |
logFacilityLogSelectorSeverityThe system log selected severity level for forwarding default value :debugro Enumeration .1.3.6.1.4.1.42229.1.2.9.10.1.1.2 |
logFacilityCompareOpThis leaf describes the option to specify how the severity comparison is performed. default value :equals-or-higherro Enumeration .1.3.6.1.4.1.42229.1.2.9.10.1.1.3 |
timeManager OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.10 |
timeManagerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.10.1 |
timeManagerTimezoneIndicates the Name of the Time Zone of this NE. default value :Greenwich_Mean_Time:Dublin-Edinburgh-Lisbon-London[GMT]ro Enumeration .1.3.6.1.4.1.42229.1.2.10.1.1 |
timeManagerCurrentTimeIndicates the current Date and Time of this NE.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.10.1.2 |
timeManagerLastStartTimeIndicate the time of last system boot.ro IetfYangTypesDateAndTime .1.3.6.1.4.1.42229.1.2.10.1.3 |
timeManagerUpTimeIndicate how long the system has been running.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.10.1.4 |
timeManagerTimeSourceStateIndicates the state of the time source.ro Enumeration .1.3.6.1.4.1.42229.1.2.10.1.5 |
ntp OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.10.2 |
ntpEnabledIndicates if NTP is enabled. default value :falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.10.2.1 |
ntpCurrentTimeSourceIndicates the current time source. default value :0.0.0.0ro IetfInetTypesIpv4AddressNoZone .1.3.6.1.4.1.42229.1.2.10.2.2 |
ntpAssociation OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.10.3 |
ntpAssociationTableNULL SEQUENCE OF NtpAssociationEntry .1.3.6.1.4.1.42229.1.2.10.3.1 |
ntpAssociationEntryEntry of ntpAssociationTable NtpAssociationEntry .1.3.6.1.4.1.42229.1.2.10.3.1.1 |
ntpAssociationSourceIndicates the ntp-association-source.ro IetfInetTypesIpv4AddressNoZone .1.3.6.1.4.1.42229.1.2.10.3.1.1.1 |
ntpAssociationTypeIndicates the ntp association type.ro Enumeration .1.3.6.1.4.1.42229.1.2.10.3.1.1.2 |
ntpAssociationPreferredNtpAssociationIndicates if this is preferred.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.10.3.1.1.3 |
ntpAssociationNtpAdminStateThe administrative state specifies the permission to use or prohibition against using the resource. default value :upro Enumeration .1.3.6.1.4.1.42229.1.2.10.3.1.1.4 |
ntpAssociationStatus OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.10.4 |
ntpAssociationStatusTableNULL SEQUENCE OF NtpAssociationStatusEntry .1.3.6.1.4.1.42229.1.2.10.4.1 |
ntpAssociationStatusEntryEntry of ntpAssociationStatusTable NtpAssociationStatusEntry .1.3.6.1.4.1.42229.1.2.10.4.1.1 |
ntpAssociationStatusNtpAssociationRefidReference clock type or address for the peer.ro OCTET STRING .1.3.6.1.4.1.42229.1.2.10.4.1.1.1 |
ntpAssociationStatusNtpStratumThis attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.10.4.1.1.2 |
ntpAssociationStatusNtpPollingIntervalNTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds. UNITS:secondsro Unsigned32 .1.3.6.1.4.1.42229.1.2.10.4.1.1.3 |
ntpAssociationStatusNtpPrecisionThis is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds. UNITS:millisecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.10.4.1.1.4 |
ntpAssociationStatusNtpAssociationOffsetIndicates the offset between the local clock and the superior reference clock. UNITS:millisecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.10.4.1.1.5 |
ntpAssociationStatusNtpAssociationReachIndicates the reachability of the configured server or peer.ro Unsigned32 .1.3.6.1.4.1.42229.1.2.10.4.1.1.6 |
ntpAssociationStatusNtpAssociationDelayIndicates the delay between the local clock and the superior reference clock, in milliseconds. UNITS:millisecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.10.4.1.1.7 |
ntpAssociationStatusNtpAssociationDispersionIndicates the dispersion between the local clock and the peer clock, in milliseconds. UNITS:millisecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.10.4.1.1.8 |
ztc OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.11 |
ztcInfo OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.11.1 |
ztcEnabledenable/disable Zero Touch commissioning. default value :truero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42229.1.2.11.1.1 |
ztcStatusShows the ZTC process status: disabled - ZTC will not be attempted because it was disabled via configuration ready - ZTC will be attempted when able to communicate with external ZTC server ongoing - ZTC is ongoing failed - some problems occurred during ZTC done - ZTC completed successfully. default value :readyro Enumeration .1.3.6.1.4.1.42229.1.2.11.1.2 |
common OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13 |
bitErrorRatePreFec OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.1 |
bitErrorRatePreFecTablestatistics value: average, minimum, maximum and instant value for bit error rate before fec SEQUENCE OF BitErrorRatePreFecEntry .1.3.6.1.4.1.42229.1.2.13.1.1 |
bitErrorRatePreFecEntryEntry of bitErrorRatePreFecTable BitErrorRatePreFecEntry .1.3.6.1.4.1.42229.1.2.13.1.1.1 |
bitErrorRatePreFecInstantthe instant value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.1.1.1.1 |
bitErrorRatePreFecAvgthe average value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.1.1.1.2 |
bitErrorRatePreFecMinthe minimum value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.1.1.1.3 |
bitErrorRatePreFecMaxthe maximum value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.1.1.1.4 |
bitErrorRatePostFec OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.2 |
bitErrorRatePostFecTablestatistics value: average, minimum, maximum and instant value for bit error rate post fec SEQUENCE OF BitErrorRatePostFecEntry .1.3.6.1.4.1.42229.1.2.13.2.1 |
bitErrorRatePostFecEntryEntry of bitErrorRatePostFecTable BitErrorRatePostFecEntry .1.3.6.1.4.1.42229.1.2.13.2.1.1 |
bitErrorRatePostFecInstantthe instant value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.2.1.1.1 |
bitErrorRatePostFecAvgthe average value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.2.1.1.2 |
bitErrorRatePostFecMinthe minimum value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.2.1.1.3 |
bitErrorRatePostFecMaxthe maximum value of statistics counter UNITS:bit-ratioro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.2.1.1.4 |
inUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.3 |
inUtilizationTablestatistics value: average, minimum, maximum and instant value for RX utilization SEQUENCE OF InUtilizationEntry .1.3.6.1.4.1.42229.1.2.13.3.1 |
inUtilizationEntryEntry of inUtilizationTable InUtilizationEntry .1.3.6.1.4.1.42229.1.2.13.3.1.1 |
inUtilizationInstantthe instant value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.3.1.1.1 |
inUtilizationAvgthe average value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.3.1.1.2 |
inUtilizationMinthe minimum value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.3.1.1.3 |
inUtilizationMaxthe maximum value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.3.1.1.4 |
outUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.4 |
outUtilizationTablestatistics value: average, minimum, maximum and instant value for TX utilization SEQUENCE OF OutUtilizationEntry .1.3.6.1.4.1.42229.1.2.13.4.1 |
outUtilizationEntryEntry of outUtilizationTable OutUtilizationEntry .1.3.6.1.4.1.42229.1.2.13.4.1.1 |
outUtilizationInstantthe instant value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.4.1.1.1 |
outUtilizationAvgthe average value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.4.1.1.2 |
outUtilizationMinthe minimum value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.4.1.1.3 |
outUtilizationMaxthe maximum value of statistics counterro CoriantTypesPercentage .1.3.6.1.4.1.42229.1.2.13.4.1.1.4 |
oduDelay OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.23 |
oduDelayTablestatistics value: average, minimum, maximum and instant value for measured odu signal delay SEQUENCE OF OduDelayEntry .1.3.6.1.4.1.42229.1.2.13.23.1 |
oduDelayEntryEntry of oduDelayTable OduDelayEntry .1.3.6.1.4.1.42229.1.2.13.23.1.1 |
oduDelayInstantthe instant value of statistics counter UNITS:microsecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.23.1.1.1 |
oduDelayAvgthe average value of statistics counter UNITS:microsecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.23.1.1.2 |
oduDelayMinthe minimum value of statistics counter UNITS:microsecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.23.1.1.3 |
oduDelayMaxthe maximum value of statistics counter UNITS:microsecondsro OCTET STRING .1.3.6.1.4.1.42229.1.2.13.23.1.1.4 |
inOpticalPower OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.24 |
inOpticalPowerTablestatistics value: average, minimum, maximum and instant value for RX optical power SEQUENCE OF InOpticalPowerEntry .1.3.6.1.4.1.42229.1.2.13.24.1 |
inOpticalPowerEntryEntry of inOpticalPowerTable InOpticalPowerEntry .1.3.6.1.4.1.42229.1.2.13.24.1.1 |
inOpticalPowerInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.24.1.1.1 |
inOpticalPowerAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.24.1.1.2 |
inOpticalPowerMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.24.1.1.3 |
inOpticalPowerMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.24.1.1.4 |
outOpticalPower OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.25 |
outOpticalPowerTablestatistics value: average, minimum, maximum and instant value for TX optical power SEQUENCE OF OutOpticalPowerEntry .1.3.6.1.4.1.42229.1.2.13.25.1 |
outOpticalPowerEntryEntry of outOpticalPowerTable OutOpticalPowerEntry .1.3.6.1.4.1.42229.1.2.13.25.1.1 |
outOpticalPowerInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.25.1.1.1 |
outOpticalPowerAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.25.1.1.2 |
outOpticalPowerMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.25.1.1.3 |
outOpticalPowerMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.25.1.1.4 |
differentialGroupDelay OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.26 |
differentialGroupDelayTablestatistics value: average, minimum, maximum and instant value for differential group delay SEQUENCE OF DifferentialGroupDelayEntry .1.3.6.1.4.1.42229.1.2.13.26.1 |
differentialGroupDelayEntryEntry of differentialGroupDelayTable DifferentialGroupDelayEntry .1.3.6.1.4.1.42229.1.2.13.26.1.1 |
differentialGroupDelayInstantthe instant value of statistics counter UNITS:psro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.26.1.1.1 |
differentialGroupDelayAvgthe average value of statistics counter UNITS:psro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.26.1.1.2 |
differentialGroupDelayMinthe minimum value of statistics counter UNITS:psro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.26.1.1.3 |
differentialGroupDelayMaxthe maximum value of statistics counter UNITS:psro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.26.1.1.4 |
chromaticDispersion OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.27 |
chromaticDispersionTablestatistics value: average, minimum, maximum and instant value for chromatic dispersion SEQUENCE OF ChromaticDispersionEntry .1.3.6.1.4.1.42229.1.2.13.27.1 |
chromaticDispersionEntryEntry of chromaticDispersionTable ChromaticDispersionEntry .1.3.6.1.4.1.42229.1.2.13.27.1.1 |
chromaticDispersionInstantthe instant value of statistics counter UNITS:ps/nmro INTEGER .1.3.6.1.4.1.42229.1.2.13.27.1.1.1 |
chromaticDispersionAvgthe average value of statistics counter UNITS:ps/pmro INTEGER .1.3.6.1.4.1.42229.1.2.13.27.1.1.2 |
chromaticDispersionMinthe minimum value of statistics counter UNITS:ps/pmro INTEGER .1.3.6.1.4.1.42229.1.2.13.27.1.1.3 |
chromaticDispersionMaxthe maximum value of statistics counter UNITS:ps/pmro INTEGER .1.3.6.1.4.1.42229.1.2.13.27.1.1.4 |
osnr OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.28 |
osnrTablestatistics value: average, minimum, maximum and instant value for osnr SEQUENCE OF OsnrEntry .1.3.6.1.4.1.42229.1.2.13.28.1 |
osnrEntryEntry of osnrTable OsnrEntry .1.3.6.1.4.1.42229.1.2.13.28.1.1 |
osnrInstantthe instant value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.28.1.1.1 |
osnrAvgthe average value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.28.1.1.2 |
osnrMinthe minimum value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.28.1.1.3 |
osnrMaxthe maximum value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.28.1.1.4 |
qFactor OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.29 |
qFactorTablestatistics value: average, minimum, maximum and instant value for q-factor SEQUENCE OF QFactorEntry .1.3.6.1.4.1.42229.1.2.13.29.1 |
qFactorEntryEntry of qFactorTable QFactorEntry .1.3.6.1.4.1.42229.1.2.13.29.1.1 |
qFactorInstantthe instant value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.29.1.1.1 |
qFactorAvgthe average value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.29.1.1.2 |
qFactorMinthe minimum value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.29.1.1.3 |
qFactorMaxthe maximum value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.29.1.1.4 |
polarizationDependentLoss OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.30 |
polarizationDependentLossTablestatistics value: average, minimum, maximum and instant value for polarization dependent loss SEQUENCE OF PolarizationDependentLossEntry .1.3.6.1.4.1.42229.1.2.13.30.1 |
polarizationDependentLossEntryEntry of polarizationDependentLossTable PolarizationDependentLossEntry .1.3.6.1.4.1.42229.1.2.13.30.1.1 |
polarizationDependentLossInstantthe instant value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.30.1.1.1 |
polarizationDependentLossAvgthe average value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.30.1.1.2 |
polarizationDependentLossMinthe minimum value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.30.1.1.3 |
polarizationDependentLossMaxthe maximum value of statistics counterro CoriantTypesDBPrecision1 .1.3.6.1.4.1.42229.1.2.13.30.1.1.4 |
inOpticalFrequency OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.31 |
inOpticalFrequencyTablestatistics value: average, minimum, maximum and instant value for RX optical frequency SEQUENCE OF InOpticalFrequencyEntry .1.3.6.1.4.1.42229.1.2.13.31.1 |
inOpticalFrequencyEntryEntry of inOpticalFrequencyTable InOpticalFrequencyEntry .1.3.6.1.4.1.42229.1.2.13.31.1.1 |
inOpticalFrequencyInstantthe instant value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.31.1.1.1 |
inOpticalFrequencyAvgthe average value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.31.1.1.2 |
inOpticalFrequencyMinthe minimum value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.31.1.1.3 |
inOpticalFrequencyMaxthe maximum value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.31.1.1.4 |
outOpticalFrequency OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.32 |
outOpticalFrequencyTablestatistics value: average, minimum, maximum and instant value for TX optical frequency SEQUENCE OF OutOpticalFrequencyEntry .1.3.6.1.4.1.42229.1.2.13.32.1 |
outOpticalFrequencyEntryEntry of outOpticalFrequencyTable OutOpticalFrequencyEntry .1.3.6.1.4.1.42229.1.2.13.32.1.1 |
outOpticalFrequencyInstantthe instant value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.32.1.1.1 |
outOpticalFrequencyAvgthe average value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.32.1.1.2 |
outOpticalFrequencyMinthe minimum value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.32.1.1.3 |
outOpticalFrequencyMaxthe maximum value of statistics counter UNITS:MHzro Unsigned32 .1.3.6.1.4.1.42229.1.2.13.32.1.1.4 |
inOpticalPowerLaneHigh OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.33 |
inOpticalPowerLaneHighTablestatistics value: average, minimum, maximum and instant value for highest value of RX lane optical power SEQUENCE OF InOpticalPowerLaneHighEntry .1.3.6.1.4.1.42229.1.2.13.33.1 |
inOpticalPowerLaneHighEntryEntry of inOpticalPowerLaneHighTable InOpticalPowerLaneHighEntry .1.3.6.1.4.1.42229.1.2.13.33.1.1 |
inOpticalPowerLaneHighInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.33.1.1.1 |
inOpticalPowerLaneHighAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.33.1.1.2 |
inOpticalPowerLaneHighMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.33.1.1.3 |
inOpticalPowerLaneHighMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.33.1.1.4 |
inOpticalPowerLaneLow OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.34 |
inOpticalPowerLaneLowTablestatistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power SEQUENCE OF InOpticalPowerLaneLowEntry .1.3.6.1.4.1.42229.1.2.13.34.1 |
inOpticalPowerLaneLowEntryEntry of inOpticalPowerLaneLowTable InOpticalPowerLaneLowEntry .1.3.6.1.4.1.42229.1.2.13.34.1.1 |
inOpticalPowerLaneLowInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.34.1.1.1 |
inOpticalPowerLaneLowAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.34.1.1.2 |
inOpticalPowerLaneLowMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.34.1.1.3 |
inOpticalPowerLaneLowMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.34.1.1.4 |
inOpticalPowerLaneTotal OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.35 |
inOpticalPowerLaneTotalTablestatistics value: average, minimum, maximum and instant value for total value of RX lane optical power SEQUENCE OF InOpticalPowerLaneTotalEntry .1.3.6.1.4.1.42229.1.2.13.35.1 |
inOpticalPowerLaneTotalEntryEntry of inOpticalPowerLaneTotalTable InOpticalPowerLaneTotalEntry .1.3.6.1.4.1.42229.1.2.13.35.1.1 |
inOpticalPowerLaneTotalInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.35.1.1.1 |
inOpticalPowerLaneTotalAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.35.1.1.2 |
inOpticalPowerLaneTotalMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.35.1.1.3 |
inOpticalPowerLaneTotalMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.35.1.1.4 |
outOpticalPowerLaneHigh OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.36 |
outOpticalPowerLaneHighTablestatistics value: average, minimum, maximum and instant value for highest value of TX lane optical power SEQUENCE OF OutOpticalPowerLaneHighEntry .1.3.6.1.4.1.42229.1.2.13.36.1 |
outOpticalPowerLaneHighEntryEntry of outOpticalPowerLaneHighTable OutOpticalPowerLaneHighEntry .1.3.6.1.4.1.42229.1.2.13.36.1.1 |
outOpticalPowerLaneHighInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.36.1.1.1 |
outOpticalPowerLaneHighAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.36.1.1.2 |
outOpticalPowerLaneHighMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.36.1.1.3 |
outOpticalPowerLaneHighMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.36.1.1.4 |
outOpticalPowerLaneLow OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.37 |
outOpticalPowerLaneLowTablestatistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power SEQUENCE OF OutOpticalPowerLaneLowEntry .1.3.6.1.4.1.42229.1.2.13.37.1 |
outOpticalPowerLaneLowEntryEntry of outOpticalPowerLaneLowTable OutOpticalPowerLaneLowEntry .1.3.6.1.4.1.42229.1.2.13.37.1.1 |
outOpticalPowerLaneLowInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.37.1.1.1 |
outOpticalPowerLaneLowAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.37.1.1.2 |
outOpticalPowerLaneLowMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.37.1.1.3 |
outOpticalPowerLaneLowMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.37.1.1.4 |
outOpticalPowerLaneTotal OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.38 |
outOpticalPowerLaneTotalTablestatistics value: average, minimum, maximum and instant value for total value of TX lane optical power SEQUENCE OF OutOpticalPowerLaneTotalEntry .1.3.6.1.4.1.42229.1.2.13.38.1 |
outOpticalPowerLaneTotalEntryEntry of outOpticalPowerLaneTotalTable OutOpticalPowerLaneTotalEntry .1.3.6.1.4.1.42229.1.2.13.38.1.1 |
outOpticalPowerLaneTotalInstantthe instant value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.38.1.1.1 |
outOpticalPowerLaneTotalAvgthe average value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.38.1.1.2 |
outOpticalPowerLaneTotalMinthe minimum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.38.1.1.3 |
outOpticalPowerLaneTotalMaxthe maximum value of statistics counterro CoriantTypesOpticalPower .1.3.6.1.4.1.42229.1.2.13.38.1.1.4 |
moduleTemperature OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.39 |
moduleTemperatureTablestatistics value: average, minimum, maximum and instant value for module temperature SEQUENCE OF ModuleTemperatureEntry .1.3.6.1.4.1.42229.1.2.13.39.1 |
moduleTemperatureEntryEntry of moduleTemperatureTable ModuleTemperatureEntry .1.3.6.1.4.1.42229.1.2.13.39.1.1 |
moduleTemperatureInstantthe instant value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.39.1.1.1 |
moduleTemperatureAvgthe average value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.39.1.1.2 |
moduleTemperatureMinthe minimum value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.39.1.1.3 |
moduleTemperatureMaxthe maximum value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.39.1.1.4 |
inletTemperature OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.40 |
inletTemperatureTablestatistics value: average, minimum, maximum and instant value for inlet temperature SEQUENCE OF InletTemperatureEntry .1.3.6.1.4.1.42229.1.2.13.40.1 |
inletTemperatureEntryEntry of inletTemperatureTable InletTemperatureEntry .1.3.6.1.4.1.42229.1.2.13.40.1.1 |
inletTemperatureInstantthe instant value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.40.1.1.1 |
inletTemperatureAvgthe average value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.40.1.1.2 |
inletTemperatureMinthe minimum value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.40.1.1.3 |
inletTemperatureMaxthe maximum value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.40.1.1.4 |
outletTemperature OBJECT IDENTIFIER .1.3.6.1.4.1.42229.1.2.13.41 |
outletTemperatureTablestatistics value: average, minimum, maximum and instant value for outlet temperature SEQUENCE OF OutletTemperatureEntry .1.3.6.1.4.1.42229.1.2.13.41.1 |
outletTemperatureEntryEntry of outletTemperatureTable OutletTemperatureEntry .1.3.6.1.4.1.42229.1.2.13.41.1.1 |
outletTemperatureInstantthe instant value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.41.1.1.1 |
outletTemperatureAvgthe average value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.41.1.1.2 |
outletTemperatureMinthe minimum value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.41.1.1.3 |
outletTemperatureMaxthe maximum value of statistics counterro CoriantTypesTemperaturePrecision3 .1.3.6.1.4.1.42229.1.2.13.41.1.1.4 |