COPPER-MOUNTAIN-NETWORKS-DSL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for COPPER-MOUNTAIN-NETWORKS-DSL-MIB.
756
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
756 total| Object Name |
|---|
coppermountain OBJECT IDENTIFIER .1.3.6.1.4.1.1996 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1996 |
cmLoginErrorIndicates an operator tried and failed to log into the system.
If this trap has a severity of 'information,' it can
potentially clear an alarm in the system. When such a trap is
received by the manager, the operator can query the
cmTrapCriticalCount, cmTrapMajorAlarmCount, and
cmTrapMinorAlarmCount objects to get the current system alarm
status. TRAP-TYPE .1.3.6.1.4.1.1996.0.1 |
cmLoginOKThis trap indicates that an operator has successfully logged into
the system.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.2 |
cmLogoutIndicates that an operator has successfully logged out of the
system. TRAP-TYPE .1.3.6.1.4.1.1996.0.3 |
cmLoginsSaturatedIndicates that the maximum number of operators are currently
logged into the system. No more logins will be allowed until
one of them logs out. TRAP-TYPE .1.3.6.1.4.1.1996.0.4 |
cmLoginsAvailableInidicates that logins are allowed again.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.5 |
cmBoardUpThis trap indicates that the indicated system board
has established communication with the System Control Module.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.6 |
cmBoardDownThis trap indicates that the indicated system board
has stopped communicating with the System Control Module. TRAP-TYPE .1.3.6.1.4.1.1996.0.7 |
cmLoginsSuspendedInidcates that logins are temporarily suspended for the given
operator name because of 3 successive failed login attempts. TRAP-TYPE .1.3.6.1.4.1.1996.0.8 |
cmLoginsAllowedIndicates that logins are now allowed for this user name.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.9 |
cmBootFileErrorIndicates that the given board did not successfully boot.
The reason for this failure can be determined from the
cmTrapEventLogProbableCause object. This condition requires
craft action to clear. TRAP-TYPE .1.3.6.1.4.1.1996.0.10 |
cmBootFileOKIndicates that the given boot file was downloaded to the given
board successfully.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.11 |
cmAttributeChangeIndicates an attribute was changed by an operator. The text
field contains the name of the changed attribute and the new
value. TRAP-TYPE .1.3.6.1.4.1.1996.0.12 |
cmConfigFileReadFailedIndicates that the Config File Read operation failed. The text
field contains a description of the error encountered. TRAP-TYPE .1.3.6.1.4.1.1996.0.13 |
cmConfigFileReadOkIndicates the Config File Read operation executed successfully.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.14 |
cmConfigFileWriteFailedIndicates that the Config File Write operation failed. The
text field contains a description of the error encountered. TRAP-TYPE .1.3.6.1.4.1.1996.0.15 |
cmConfigFileWriteOkIndicates the Config File Write operation executed
successfully.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.16 |
cmOperStateChangeIndicates that the Operability State of a resource has changed
in the system. TRAP-TYPE .1.3.6.1.4.1.1996.0.17 |
cmDiagnosticIndicates some diagnostic event occurred. The text field contains
a description of the event. TRAP-TYPE .1.3.6.1.4.1.1996.0.18 |
cmBoardRestartThe reason code field indicates the reason for the restart. TRAP-TYPE .1.3.6.1.4.1.1996.0.19 |
cmFanFailureIndicates that the system fan has failed. TRAP-TYPE .1.3.6.1.4.1.1996.0.20 |
cmFanFailureClearIndicates that the system fan failure has been cleared.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.21 |
cmPowerSupplyFailureIndicates that one of the two system power supplies has failed.
The failed power supply is identified by
cmTrapEventLogObjectClass and cmTrapEventLogClassId. TRAP-TYPE .1.3.6.1.4.1.1996.0.22 |
cmPowerSupplyFailureClearIndicates that a previous power supply failure has been
cleared. The power supply is identified by
cmTrapEventLogObjectClass and cmTrapEventLogClassId.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.23 |
cmLoopStatusChangeThis trap is sent at the beginning and end of a loopback
test. the cmLoopTermCode, cmLoopTimeElapsed, cmLoopTxCount,
and cmLoopRxErrors fields are only valid if cmLoopStatus
is Done. TRAP-TYPE .1.3.6.1.4.1.1996.0.24 |
cmRisingAlarmThe SNMP trap that is generated when an alarm
entry crosses its rising threshold and generates
an event that is configured for sending SNMP
traps. TRAP-TYPE .1.3.6.1.4.1.1996.0.25 |
cmIDSLBoardTimingLossThis trap indicates that the globally timed master or slave IDSL Line
Card has lost network timing. TRAP-TYPE .1.3.6.1.4.1.1996.0.26 |
cmIDSLBoardTimingLossClearThis trap indicates that the globally timed master or slave IDSL
Line Card has reaquired network timing.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.27 |
cmRoleChangeThis trap is sent whenever an SCM changes role from Primary to
Secondary, or from Secondary to Primary.
If this trap has a severity of 'information,' it can potentially
clear an alarm in the system. When such a trap is received by the
manager, the operator can query the cmTrapCriticalCount,
cmTrapMajorAlarmCount, and cmTrapMinorAlarmCount objects to get
the current system alarm status. TRAP-TYPE .1.3.6.1.4.1.1996.0.28 |
cmRedundancyChangeThis trap is sent whenever an SCM detects that Redundancy has
changed from enabled/disabled to disabled/enabled. TRAP-TYPE .1.3.6.1.4.1.1996.0.29 |
cmRedundancyConflictThis trap is sent when an SCM comes up, detects that it should be locked as
the Primary SCM, but there is another Primary which has already locked the
system (i.e. Disabled Redundancy). TRAP-TYPE .1.3.6.1.4.1.1996.0.30 |
cmMaintCmdStatusChangeIndicates a maintenance command completed successfully or
failed, according to the CommandStatus field. TRAP-TYPE .1.3.6.1.4.1.1996.0.31 |
cmFallingAlarmThis trap is sent at the end of an interval when an object that
is configured with a Falling Threshold has dropped below the
fallingThresdhold value in the cmAlarmTable. TRAP-TYPE .1.3.6.1.4.1.1996.0.32 |
cmRateFallbackThis trap is sent whenever a modem trains at a rate less than
the configured datarate. TRAP-TYPE .1.3.6.1.4.1.1996.0.33 |
cmRateFallbackClearThis trap is sent whenever the modem drops training. TRAP-TYPE .1.3.6.1.4.1.1996.0.34 |
cmEndPointConflictAlarmThis minor severity trap is sent if one of the following configuration
conflicts occurs:
1. A DSL link comes up and the EndPointID matches another DSL link
outside the first links bundle.
2. A DSL link comes up and the EndPointID doesn't match the current
EndPointID in its bundle.
3. A DSL Link that is not IMUX capable comes up and is configured
in a bundle. TRAP-TYPE .1.3.6.1.4.1.1996.0.35 |
cmRegistry OBJECT IDENTIFIER .1.3.6.1.4.1.1996.1 |
cmCE120Platform OBJECT IDENTIFIER .1.3.6.1.4.1.1996.1.1 |
cmCE150Platform OBJECT IDENTIFIER .1.3.6.1.4.1.1996.1.2 |
cmCE200Platform OBJECT IDENTIFIER .1.3.6.1.4.1.1996.1.3 |
cmTransmission OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10 |
cmHDSL OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.3 |
cmHDSLModemTableThe DSL Port Information table for Configuration and
Management of DSL ports. SEQUENCE OF CmHDSLModemEntry .1.3.6.1.4.1.1996.10.3.1 |
cmHDSLModemEntryAn entry in the DSL Port Information table. CmHDSLModemEntry .1.3.6.1.4.1.1996.10.3.1.1 |
cmHDSLModemIndexThe value of this object indicates the combination of shelf,
port and slot number (i.e ifIndex).ro INTEGER .1.3.6.1.4.1.1996.10.3.1.1.1 |
cmHDSLModemTypeThe value of this object specifies the bit pump type.ro Enumeration .1.3.6.1.4.1.1996.10.3.1.1.2 |
cmHDSLModemTxGainThe value of this object specifies the transmit gain.ro INTEGER .1.3.6.1.4.1.1996.10.3.1.1.3 |
cmHDSLModemTestModeThe value of this Object is the test mode in operation. Please note
that in future SW releases this attributes shall only be accessible
to diagnostic engineers.ro Enumeration .1.3.6.1.4.1.1996.10.3.1.1.4 |
cmHDSLModemNoiseMarginThe value of this object specifies the noise margin of the receiver.ro INTEGER .1.3.6.1.4.1.1996.10.3.1.1.5 |
cmHDSLModemBPSwMajorVersionThe value of this Object is the major Sw Version Number.ro INTEGER .1.3.6.1.4.1.1996.10.3.1.1.7 |
cmHDSLModemBPSwMinorVersionThe value of this Object is the minor Sw Version Number.ro INTEGER .1.3.6.1.4.1.1996.10.3.1.1.8 |
cmHDSLModemBPHwVersionThe value of this Object is the Hw Version Number.ro INTEGER .1.3.6.1.4.1.1996.10.3.1.1.9 |
cmHDSLModemDataRateThis object sets/displays the data rate, in kbps, for this port.rw Enumeration .1.3.6.1.4.1.1996.10.3.1.1.14 |
cmHDSLModemCpeCodeThe value of this object describes certain charateristics that are
unique to this CPE. For example line polarity, di-bit ordering,
preactiviation signaling, etc. The CpeCode for a specific
manufacturer's CPE is assigned and distributed by Copper Mountain
Networks.rw INTEGER .1.3.6.1.4.1.1996.10.3.1.1.15 |
cmHDSLModemSuccessfulTrainsThe is the number of successful trains for this port. This value is
zero at powerup. This value is cleared whenver the operator changes
the data rate for the port, or whenever the operator sets this object
to 0.ro Counter .1.3.6.1.4.1.1996.10.3.1.1.16 |
cmHDSLModemFailedTrainingAttemptsThe is the number of failed training attempts for this port. This
value is zero at powerup. This value is cleared whenver the operator
changes the data rate for the port, or whenever the operator sets this
object to 0.ro Counter .1.3.6.1.4.1.1996.10.3.1.1.17 |
cmHDSLModemCpeResponsesThe is the number of CPE responses to training sequences that have
been seen on this port. The responses may lead to successful trains
or not. This value is zero at powerup. This value is cleared whenver
the operator changes the data rate for the port, or whenever the
operator sets this object to 0.ro Counter .1.3.6.1.4.1.1996.10.3.1.1.18 |
cmHDSLModemMinRateThe value of this object indicates the minimum rate the fallback
mechanism will attempt to train at. MinRate == 'none' disables the
feature. MinRate >= cmHDSLModemDataRate shall be rejected. The default
is 'none'.rw Enumeration .1.3.6.1.4.1.1996.10.3.1.1.19 |
cmHDSLModemCurrentRateThis field represents either the attempted rate or the actual trained
rate, depending upon the training state of the link.ro Enumeration .1.3.6.1.4.1.1996.10.3.1.1.20 |
cmHDSLModemCommandThis field directs a particular command to the specific link.
'retrain' forces the link to retrain.rw Enumeration .1.3.6.1.4.1.1996.10.3.1.1.21 |
cmHDSLPerfIntervalTableObsoleted 4/6/99.
Dsl Port info about Perf Countersobsolete SEQUENCE OF CmHDSLPerfIntervalEntry .1.3.6.1.4.1.1996.10.3.2 |
cmHDSLPerfIntervalEntryObsoleted 4/6/99.
Dsl Port Performance Monitoring Countersobsolete CmHDSLPerfIntervalEntry .1.3.6.1.4.1.1996.10.3.2.1 |
cmHDSLPerfIndexObsoleted 4/6/99.
DSL port (interface) number (i.e ifIndex)obsolete INTEGER .1.3.6.1.4.1.1996.10.3.2.1.1 |
cmHDSLPerfIntervalNumberObsoleted 4/6/99.
A value between 1 and 24, where 1 is the most
recent hour interval and 24 is the oldest hour intervalobsolete INTEGER .1.3.6.1.4.1.1996.10.3.2.1.2 |
cmHDSLPerfTxUnderrunsObsoleted 4/6/99.
Number of transmit underruns detected.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.3 |
cmHDSLPerfRxTruncatedObsoleted 4/6/99.
Number of frames truncated due to receiver overruns.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.4 |
cmHDSLPerfRxBigObsoleted 4/6/99.
Number of receive frames that were discarded because they were
too large.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.5 |
cmHDSLPerfRxAbortsObsoleted 4/6/99.
Number of aborted frames received.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.6 |
cmHDSLPerfRxAlignmentErrorsObsoleted 4/6/99.
Number of unaligned frames received.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.7 |
cmHDSLPerfRxCRCErrorsObsoleted 4/6/99.
Number of frames received with CRC errors.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.8 |
cmHDSLPerfRxOverrunsObsoleted 4/6/99.
Number of frames discarded because of receiver overruns.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.9 |
cmHDSLPerfRxValidFramesObsoleted 4/6/99.
Number of valid frames received.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.10 |
cmHDSLPerfTxValidFramesObsoleted 4/6/99.
Number of frames transmitted successfullyobsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.11 |
cmHDSLPerfRxNoBuffersObsoleted 4/6/99.
Number of receive frames discarded due to lack of buffers.obsolete Counter .1.3.6.1.4.1.1996.10.3.2.1.12 |
cmCpeHDSLModemTableThe DSL Port Information table for Configuration and
Management of DSL ports. SEQUENCE OF CmCpeHDSLModemEntry .1.3.6.1.4.1.1996.10.3.3 |
cmCpeHDSLModemEntryAn entry in the DSL Port Information table. CmCpeHDSLModemEntry .1.3.6.1.4.1.1996.10.3.3.1 |
cmCpeHDSLModemIndexThe value of this object indicates the combination of shelf,
port and slot number (i.e ifIndex).ro INTEGER .1.3.6.1.4.1.1996.10.3.3.1.1 |
cmCpeHDSLModemTypeThe value of this object specifies the bit pump type.ro Enumeration .1.3.6.1.4.1.1996.10.3.3.1.2 |
cmCpeHDSLModemTxGainThe value of this object specifies the transmit gain.ro INTEGER .1.3.6.1.4.1.1996.10.3.3.1.3 |
cmCpeHDSLModemTestModeThe value of this Object is the test mode in operation. Please note
that in future SW releases this attributes shall only be accessible
to diagnostic engineers.ro Enumeration .1.3.6.1.4.1.1996.10.3.3.1.4 |
cmCpeHDSLModemNoiseMarginThe value of this object specifies the noise margin of the receiver.ro INTEGER .1.3.6.1.4.1.1996.10.3.3.1.5 |
cmCpeHDSLModemBPSwMajorVersionThe value of this Object is the major Sw Version Number.ro INTEGER .1.3.6.1.4.1.1996.10.3.3.1.7 |
cmCpeHDSLModemBPSwMinorVersionThe value of this Object is the minor Sw Version Number.ro INTEGER .1.3.6.1.4.1.1996.10.3.3.1.8 |
cmCpeHDSLModemBPHwVersionThe value of this Object is the Hw Version Number.ro INTEGER .1.3.6.1.4.1.1996.10.3.3.1.9 |
cmCpeHDSLModemDataRateThis object sets/displays the data rate, in kbps, for this port.ro Enumeration .1.3.6.1.4.1.1996.10.3.3.1.14 |
cmSDSLTestTableThis table is to configure and monitor loop tests on an SDSL port.
There is one instance of this table per SDSL port. SEQUENCE OF CmSDSLTestEntry .1.3.6.1.4.1.1996.10.3.4 |
cmSDSLTestEntryAn entry in the SDSL Test table. CmSDSLTestEntry .1.3.6.1.4.1.1996.10.3.4.1 |
cmSDSLTestIndexThis is the PII of the DSL port associated with the Loop Test. This
is also the index into this table.ro CmObjectPII .1.3.6.1.4.1.1996.10.3.4.1.1 |
cmSDSLTestActionThis field is used by the operator to start/stop the loop test on an
SDSL modem. The value None is a read-only value that is displayed.
The operator sets the action to Start to start a test, and Stop to
stop a test.rw Enumeration .1.3.6.1.4.1.1996.10.3.4.1.2 |
cmSDSLTestStatusThe status field indicates whether a test is currently in progress. If
the value is None, no test has been initiated since powerup. If the
status is Complete, a test was run and stopped since powerup.ro Enumeration .1.3.6.1.4.1.1996.10.3.4.1.3 |
cmSDSLTestTestCompleteTimeThis is the calendar time when the last test was completed. If no
test has been run since powerup, this field displays a null string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.10.3.4.1.4 |
cmSDSLTestContinuityTestResultThis is the current result of the continuity test. This field is
updated during the continuity test at least every second. This object
retains its value after a test is stopped.ro INTEGER .1.3.6.1.4.1.1996.10.3.4.1.5 |
cmSDSLTestNearEndLoopProfileThis field contains the current estimation of whether there is a
possible short or open within 500 feet of the system. This object
retains its value after the test is stopped.ro Enumeration .1.3.6.1.4.1.1996.10.3.4.1.6 |
cmSDSLTestDebugResultThis is a generic 32-bit value that conatins internal information
about the test, used for debugging. This object retains its value
after the test is stopped.ro INTEGER .1.3.6.1.4.1.1996.10.3.4.1.7 |
cmSDSLTestTypeSpecifies the test type. 'profile' checks the line profile and
runs until commanded to stop. 'seekMaxRate' determines the maximum
rate at which a line will train. 'CPEDownload' reduces the data
rate to a level supported by the prom code if needed. When the testing
stops at the completion of the download, or when the testing times out,
the data rate will be restored to the original level if there was a
rate reduction when the testing started. The CPEDownload command will
preempt all other cmSDSLTest command types.rw Enumeration .1.3.6.1.4.1.1996.10.3.4.1.8 |
cmSDSLTestMaxRateUpon completion of 'seekMaxRate', this field represents the maximum
rate the link will train at.ro Enumeration .1.3.6.1.4.1.1996.10.3.4.1.9 |
cmIface OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.4 |
cmIfaceTableThe interface information table to manage the highest level of interface
configuration, including networking model, IP and MAC addresses,
encapsulation formats, and policy destinations.
You can delete rows with a SET of NetModel=None, Name='', UserGroup='',
and AdditionalInfo=''. It is not an error to delete a non-existent row. SEQUENCE OF CmIfaceEntry .1.3.6.1.4.1.1996.10.4.1 |
cmIfaceEntryAn entry in the cmIface table. CmIfaceEntry .1.3.6.1.4.1.1996.10.4.1.1 |
cmIfacePIIThis object identifies the network interface PII.ro CmObjectPII .1.3.6.1.4.1.1996.10.4.1.1.1 |
cmIfaceIfIndexThis object identifies the ifIndex associated with this interfacero INTEGER .1.3.6.1.4.1.1996.10.4.1.1.2 |
cmIfaceNetModelThis object defines the Networking Model used on this interface.
IP indicates IP-LAN-extension networking.
VWAN indicates Wide Area Lan Extension.
Frame indicates Frame-multiplexing and optional conversion.
CopperVPN indicates Copper Mountain's IP-multiplexing.rw Enumeration .1.3.6.1.4.1.1996.10.4.1.1.3 |
cmIfaceIpAddrFor NetModel=IP, the IP Address of this interface.rw IpAddress .1.3.6.1.4.1.1996.10.4.1.1.4 |
cmIfaceNetMaskFor NetModel=IP, the Subnet Mask for this interface.rw IpAddress .1.3.6.1.4.1.1996.10.4.1.1.5 |
cmIfaceMacAddrThe working MAC address of the CPE connected to this DSL interface,
if applicable. Reads as 0.0.0.0.0.0 or FF.FF.FF.FF.FF.FF if not
applicable. Note that the working MAC may be different from the
Burned-in MAC.ro OCTET STRING .1.3.6.1.4.1.1996.10.4.1.1.6 |
cmIfaceBurnedInMacAddrThis object displays the burned in MAC address of the
CPE connected to this DSL interface, if it has one, and supports CMCP.ro OCTET STRING .1.3.6.1.4.1.1996.10.4.1.1.7 |
cmIfaceFarEndAddrFor NetModel=IP or CopperVPN, this object specifies the IP address of the
device connected at the far end of this interface.rw IpAddress .1.3.6.1.4.1.1996.10.4.1.1.8 |
cmIfaceDestPIIThis object specifies the destination PII for user-data packets received
on this interface.rw CmObjectPII .1.3.6.1.4.1.1996.10.4.1.1.9 |
cmIfaceFwdModeThis is the packet forwarding mode used to route packets received
on this interface. The system determines this parameter internally
from the NetModel and other configuration.ro Enumeration .1.3.6.1.4.1.1996.10.4.1.1.10 |
cmIfaceNameA name optionally assigned by the network operator.rw DisplayString .1.3.6.1.4.1.1996.10.4.1.1.11 |
cmIfaceAdditionalInfoAdditional information about this interface that is optionally
provided by the operator.rw DisplayString .1.3.6.1.4.1.1996.10.4.1.1.12 |
cmIfaceCMCPCompatibleThis object has meaning for DSL links only. This object
specifies whether the CPE at the end of the DSL link uses Copper
Mountain's Internal Control Protocol (CMCP). Non-DSL interfaces ignore
this setting, and return 'no'when read.rw Enumeration .1.3.6.1.4.1.1996.10.4.1.1.13 |
cmIfaceEncapsulationTypeThis object specifies the encapsulation type of the link.
For VWAN and IP network models the choices are rfc1483 or rfc1490.
Frame mode supports those and other values, allowing some frame
conversions between DSL and WAN interfaces.rw Enumeration .1.3.6.1.4.1.1996.10.4.1.1.14 |
cmIfaceGroupNameThis object defines the name of the user group to which this
protocol interface belongs. Note that the user group must exist
in the cmGroupTable before the value can be set in this table.rw DisplayString .1.3.6.1.4.1.1996.10.4.1.1.15 |
cmIfaceServiceClassThe value of this object indicates the current service class of
the relevant DSL port on this system.rw Enumeration .1.3.6.1.4.1.1996.10.4.1.1.16 |
cmSubIfaceTableThe cmSubIfaceTable is used to manage virtual circuits on a DSL
link. Note that for every entry in the cmSubIfaceTable there must
be is a corresponding entry in the cmIfaceTable to configure the DSL
link. The following example illustrates how an operator would use
the cmIfaceTable and cmSubIfaceTable to configure a DSL link and
the corresponding VCs on that DSL link:
1. Configure cmIface 1.6.1 with Netmodel = Frame. This creates
the frDlcmi and cmFrDlcmi entries.
2. Configure cmSubIface [1.6.1,100] by setting rowStatus to
Create. This creates the frCircuit and cmFrCircuit entries for
1.6.1.100.
3. Set cmSubIface[1.6.1, 100] destPii = 1.3.1.200. This creates
the cmIface entry for 1.3.1.200. The operator must still configure
the frCircuit entry for 1.3.1.200. SEQUENCE OF CmSubIfaceEntry .1.3.6.1.4.1.1996.10.4.2 |
cmSubIfaceEntryAn entry in the cmSubIfaceTable. CmSubIfaceEntry .1.3.6.1.4.1.1996.10.4.2.1 |
cmSubIfacePIIThis object is a unique identifier for this DSL circuit. If the DSL
link is configured for Frame Relay then cmDSLCircuitId is the DLCI.ro INTEGER .1.3.6.1.4.1.1996.10.4.2.1.1 |
cmSubIfaceDestPIIThe value of this object identifies the far end network interface,
i.e. the WAN VC to which this DSL VC is mapped, from the shelf,
slot, port and user channel. PII stands for
Permanent Interface Identifier.rw CmObjectPII .1.3.6.1.4.1.1996.10.4.2.1.2 |
cmSubIfaceNameThe value of this object is the user assigned name of this virtual
circuit.rw DisplayString .1.3.6.1.4.1.1996.10.4.2.1.3 |
cmSubIfaceRowStatusThis object is the rowStatus of the DSL Circuit. A DSL circuit is
enabled by setting this object to 'active'. An entry in this table
is created by setting this object to 'createAndGo' and is destroyed
by setting this object to 'destroy'. The values 'notReady',
'notInService' and 'CreateAndWait' are not supported.rw Enumeration .1.3.6.1.4.1.1996.10.4.2.1.4 |
cmSubIfacePrioritySpecifies the priority of this VC on the DSL physical interface.
The system does NOT distinguish between packets within a VC.
Consistent with Frame-Relay requirements, the system never reorders
packets within a VC.rw Enumeration .1.3.6.1.4.1.1996.10.4.2.1.5 |
cmEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.5 |
cmCpeEthernetIntervalTableEnet Port info about Perf Counters SEQUENCE OF CmCpeEthernetIntervalEntry .1.3.6.1.4.1.1996.10.5.1 |
cmCpeEthernetIntervalEntryEnet Port Performance Monitoring Counters CmCpeEthernetIntervalEntry .1.3.6.1.4.1.1996.10.5.1.1 |
cmCpeEthernetIndexEthernet port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.5.1.1.1 |
cmCpeEthernetIntervalNumberA value between 1 and 24, where 1 is the most
recent hour interval and 24 is the oldest hour intervalro INTEGER .1.3.6.1.4.1.1996.10.5.1.1.2 |
cmCpeEthernetIntUnknownsCount of Unknown Interrupt Events.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.3 |
cmCpeEthernetRxOKCount of Successful Receptions.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.4 |
cmCpeEthernetRxNoBufsThis is the count of times couldn't get CPE Buffers.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.5 |
cmCpeEthernetRxMissThis is the count of times chip couldn't receive frames.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.6 |
cmCpeEthernetRxSkipCount of implied received skips.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.7 |
cmCpeEthernetRxRuntCount of runt frames received.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.8 |
cmCpeEthernetRxExtraDataCount of times extra data received.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.9 |
cmCpeEthernetRxCRCErrorCount of CRC Errors.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.10 |
cmCpeEthernetRxAlignErrorCount of Received Frame Alignment Errors.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.11 |
cmCpeEthernetRxDribbleBitsCount of extra bits received.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.12 |
cmCpeEthernetTxTooBigCount of times requested transmit
length > 1518 bytes.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.13 |
cmCpeEthernetTxNotReadyCount of times transmitter being not ready.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.14 |
cmCpeEthernetTxLossCRSCount of loss of carrier sense.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.15 |
cmCpeEthernetTxSQEErrCount of SQE Errors.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.16 |
cmCpeEthernetTxOutOfWindowCount of late collisions.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.17 |
cmCpeEthernetTxJabberCount of transmits > 26 milliseconds.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.18 |
cmCpeEthernetTx16CollisionsCount of 16 txmit-collisions
for a single frame.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.19 |
cmCpeEthernetTxCollisionsCount of total txmit-collisions.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.20 |
cmCpeEthernetTxOKCount of successful transmissions.ro Counter .1.3.6.1.4.1.1996.10.5.1.1.21 |
cmFilter OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.6 |
cmFilterTableFilters to manage IP Interfaces. SEQUENCE OF CmFilterEntry .1.3.6.1.4.1.1996.10.6.1 |
cmFilterEntryAn entry in the cmFilter Table. CmFilterEntry .1.3.6.1.4.1.1996.10.6.1.1 |
cmFilterIndexThe value of this object identifies the PII (Permanent Interface
Identifier) of the interface to which this filter applies.ro INTEGER .1.3.6.1.4.1.1996.10.6.1.1.1 |
cmFilterFilterNumberThe value of this object identifies the Filter's place
in the filter list.ro INTEGER .1.3.6.1.4.1.1996.10.6.1.1.2 |
cmFilterFunctionThis object specifies an action to be taken on the PII specified by
cmFilterIndex. Note that DeleteList deletes all of the filters
associated with the given Index.rw Enumeration .1.3.6.1.4.1.1996.10.6.1.1.3 |
cmFilterSrcMaskThe value of this object indicates the mask for the source
IP Address.rw IpAddress .1.3.6.1.4.1.1996.10.6.1.1.4 |
cmFilterSrcAdrsThe value of this object is the source IP Address
of the IP packet being ANDed with the cmFilterSrcMask.rw IpAddress .1.3.6.1.4.1.1996.10.6.1.1.5 |
cmFilterDstMaskThe value of this object indicates the mask for destination
IP Address.rw IpAddress .1.3.6.1.4.1.1996.10.6.1.1.6 |
cmFilterDstAdrsThe value of this object is the dest IP Address
of the IP packet being ANDed with the cmFilterDestMask.rw IpAddress .1.3.6.1.4.1.1996.10.6.1.1.7 |
cmFilterIpProtocolThis is the value of IP Protocol Identifier. It is used to match
against the IP Protocol Ids of incoming messages. The protocol
identifiers are as follows:
0 = IP 1 = ICMP 2 = IGMP
3 = GGP 6 = TCP 17 = UDPrw INTEGER .1.3.6.1.4.1.1996.10.6.1.1.8 |
cmFilterSrcPortCompareThe value of this object specifies the comparison criterion
for comparing the UDP/TCP source port of the incoming packet
to cmFilterSrcPort.rw Enumeration .1.3.6.1.4.1.1996.10.6.1.1.9 |
cmFilterSrcPortThis object specifies the value to compare with the
source port in the received packet.rw INTEGER .1.3.6.1.4.1.1996.10.6.1.1.10 |
cmFilterDstPortCompareThe value of this object specifies the comparison criterion
for comparing the UDP/TCP destination port of the incoming packet
to cmFilterDestPort.rw Enumeration .1.3.6.1.4.1.1996.10.6.1.1.11 |
cmFilterDstPortThis object specifies the value to compare with the
destination port in the received packet.rw INTEGER .1.3.6.1.4.1.1996.10.6.1.1.12 |
cmFilterActionThis object specifies the action taken on packets that match this
filter.rw Enumeration .1.3.6.1.4.1.1996.10.6.1.1.13 |
cmDSL OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.7 |
cmDSLIntervalTableThe DSL Interval Table contains various statistics collected
by each DSL Interface over the previous 96 intervals. Samples
are collected at X minute intervals where X is specified by
cmAlarmSamplingInterval. SEQUENCE OF CmDSLIntervalEntry .1.3.6.1.4.1.1996.10.7.1 |
cmDSLIntervalEntryAn entry in the DSL Interval table. CmDSLIntervalEntry .1.3.6.1.4.1.1996.10.7.1.1 |
cmDSLIntervalIndexDSL port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.7.1.1.1 |
cmDSLIntervalNumberA value between 1 and 96, where 1 is the most recent 15 minute
interval and 96 is the oldest 15 minute intervalro INTEGER .1.3.6.1.4.1.1996.10.7.1.1.2 |
cmDSLIntervalTxUnderrunsNumber of transmit underruns detected.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.3 |
cmDSLIntervalRxTruncatedNumber of frames truncated due to receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.4 |
cmDSLIntervalRxBigNumber of receive frames that were discarded because they were
too large.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.5 |
cmDSLIntervalRxAbortsNumber of aborted frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.6 |
cmDSLIntervalRxAlignmentErrorsNumber of unaligned frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.7 |
cmDSLIntervalRxCRCErrorsNumber of frames received with CRC errors.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.8 |
cmDSLIntervalRxOverrunsNumber of frames discarded because of receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.9 |
cmDSLIntervalRxValidFramesNumber of valid frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.10 |
cmDSLIntervalTxValidFramesNumber of frames transmitted successfullyro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.11 |
cmDSLIntervalRxNoBuffersNumber of receive frames discarded due to lack of buffers.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.12 |
cmDSLIntervalTimeTagBeginThis is the time stamp indicating when the interval began.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.10.7.1.1.13 |
cmDSLIntervalTimeTagEndThis is the time stamp indicating when the interval ended.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.10.7.1.1.14 |
cmDSLIntervalMinNoiseMarginMinimum noise margin encountered in the interval associated
with thus table. Noise Margin ins not a measurable parameter
for IDSL ports; therfore this value will always be 0 for IDSL
ports.ro INTEGER .1.3.6.1.4.1.1996.10.7.1.1.15 |
cmDSLIntervalRxValidOctetsNumber of octets received in valid frames by the DSL port
in the interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.16 |
cmDSLIntervalTxValidOctetsNumber of octets transmitted over the DSL port in the
interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.17 |
cmDSLIntervalPortUpTimeNumber of seconds that the DSL port was enbabled during the
associated interval.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.1.1.18 |
cmDSLCurrentTableThe DSL Current Table contains various statistics being
collected for the current interval. The length of the
current interval is specified by cmAlarmSamplingInterval SEQUENCE OF CmDSLCurrentEntry .1.3.6.1.4.1.1996.10.7.2 |
cmDSLCurrentEntryAn entry in the DSL Current Table CmDSLCurrentEntry .1.3.6.1.4.1.1996.10.7.2.1 |
cmDSLCurrentIndexDSL port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.7.2.1.1 |
cmDSLCurrentTxUnderrunsNumber of transmit underruns detected.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.3 |
cmDSLCurrentRxTruncatedNumber of frames truncated due to receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.4 |
cmDSLCurrentRxBigNumber of receive frames that were discarded because they were
too large.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.5 |
cmDSLCurrentRxAbortsNumber of aborted frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.6 |
cmDSLCurrentRxAlignmentErrorsNumber of unaligned frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.7 |
cmDSLCurrentRxCRCErrorsNumber of frames received with CRC errors.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.8 |
cmDSLCurrentRxOverrunsNumber of frames discarded because of receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.9 |
cmDSLCurrentRxValidFramesNumber of valid frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.10 |
cmDSLCurrentTxValidFramesNumber of frames transmitted successfullyro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.11 |
cmDSLCurrentRxNoBuffersNumber of receive frames discarded due to lack of buffers.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.12 |
cmDSLCurrentMinNoiseMarginMinimum noise margin encountered in the interval associated
with thus table. Noise Margin ins not a measurable parameter
for IDSL ports; therfore this value will always be 0 for IDSL
ports.ro INTEGER .1.3.6.1.4.1.1996.10.7.2.1.13 |
cmDSLCurrentRxValidOctetsNumber of octets received in valid frames by the DSL port
in the interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.14 |
cmDSLCurrentTxValidOctetsNumber of octets transmitted over the DSL port in the
interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.15 |
cmDSLCurrentPortUpTimeNumber of seconds that the DSL port was enbabled during the
associated interval.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.2.1.16 |
cmDSLYesterdaysTableThe DSL Yesterday's Table contains the cumulative
sum of the various statistics for the 24 hour period
from midnight to midnight preceding the most recently
completed interval. SEQUENCE OF CmDSLYesterdaysEntry .1.3.6.1.4.1.1996.10.7.3 |
cmDSLYesterdaysEntryAn entry in cmDSLYesterdaysTable. CmDSLYesterdaysEntry .1.3.6.1.4.1.1996.10.7.3.1 |
cmDSLYesterdaysIndexDSL port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.7.3.1.1 |
cmDSLYesterdaysTxUnderrunsNumber of transmit underruns detected.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.2 |
cmDSLYesterdaysRxTruncatedNumber of frames truncated due to receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.3 |
cmDSLYesterdaysRxBigNumber of receive frames that were discarded because they were
too large.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.4 |
cmDSLYesterdaysRxAbortsNumber of aborted frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.5 |
cmDSLYesterdaysRxAlignmentErrorsNumber of unaligned frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.6 |
cmDSLYesterdaysRxCRCErrorsNumber of frames received with CRC errors.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.7 |
cmDSLYesterdaysRxOverrunsNumber of frames discarded because of receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.8 |
cmDSLYesterdaysRxValidFramesNumber of valid frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.9 |
cmDSLYesterdaysTxValidFramesNumber of frames transmitted successfullyro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.10 |
cmDSLYesterdaysRxNoBuffersNumber of receive frames discarded due to lack of buffers.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.11 |
cmDSLYesterdaysMinNoiseMarginMinimum noise margin encountered in the interval associated
with thus table. Noise Margin ins not a measurable parameter
for IDSL ports; therfore this value will always be 0 for IDSL
ports.ro INTEGER .1.3.6.1.4.1.1996.10.7.3.1.12 |
cmDSLYesterdaysRxValidOctetsNumber of octets received in valid frames by the DSL port
in the interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.13 |
cmDSLYesterdaysTxValidOctetsNumber of octets transmitted over the DSL port in the
interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.14 |
cmDSLYesterdaysPortUpTimeNumber of seconds that the DSL port was enbabled during the
associated interval.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.3.1.15 |
cmDSLTodaysTableThe DSL Todays Table contains the cumulative
sum of the various statistics for the period from midnight
to the most recenly completed interval. SEQUENCE OF CmDSLTodaysEntry .1.3.6.1.4.1.1996.10.7.4 |
cmDSLTodaysEntryAn entry in cmDSLTodaysTable. CmDSLTodaysEntry .1.3.6.1.4.1.1996.10.7.4.1 |
cmDSLTodaysIndexDSL port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.7.4.1.1 |
cmDSLTodaysTxUnderrunsNumber of transmit underruns detected.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.2 |
cmDSLTodaysRxTruncatedNumber of frames truncated due to receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.3 |
cmDSLTodaysRxBigNumber of receive frames that were discarded because they were
too large.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.4 |
cmDSLTodaysRxAbortsNumber of aborted frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.5 |
cmDSLTodaysRxAlignmentErrorsNumber of unaligned frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.6 |
cmDSLTodaysRxCRCErrorsNumber of frames received with CRC errors.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.7 |
cmDSLTodaysRxOverrunsNumber of frames discarded because of receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.8 |
cmDSLTodaysRxValidFramesNumber of valid frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.9 |
cmDSLTodaysTxValidFramesNumber of frames transmitted successfullyro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.10 |
cmDSLTodaysRxNoBuffersNumber of receive frames discarded due to lack of buffers.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.11 |
cmDSLTodaysMinNoiseMarginMinimum noise margin encountered in the interval associated
with thus table. Noise Margin ins not a measurable parameter
for IDSL ports; therfore this value will always be 0 for IDSL
ports.ro INTEGER .1.3.6.1.4.1.1996.10.7.4.1.12 |
cmDSLTodaysRxValidOctetsNumber of octets received in valid frames by the DSL port
in the interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.13 |
cmDSLTodaysTxValidOctetsNumber of octets transmitted over the DSL port in the
interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.14 |
cmDSLTodaysPortUpTimeNumber of seconds that the DSL port was enbabled during the
associated interval.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.4.1.15 |
cmDSL24HrTableThe DSL 24 Hour Table contains the cumulative sum of the
various statistics for 96*cmAlarmSamplingInterval minutes worth
of data or the preceding 24 hour period, whichever is less.
With the default SamplingInterval of 15 minutes, this table
will contain 24 hours worth of data.
NOTE: With a SamplingInterval greater than 15 minutes, this
table will contain some multiple of SamplingInterval so that
the total is closest to, but not less than, 24 hours. (For
example, with a SamplingInterval of 17 minutes, this table will
contain 85 intervals = 1445 minutes = 24 hours and 5 minutes
worth of data.) SEQUENCE OF CmDSL24HrEntry .1.3.6.1.4.1.1996.10.7.5 |
cmDSL24HrEntryAn entry in cmDSL24HrTable. CmDSL24HrEntry .1.3.6.1.4.1.1996.10.7.5.1 |
cmDSL24HrIndexDSL port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.7.5.1.1 |
cmDSL24HrTxUnderrunsNumber of transmit underruns detected.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.2 |
cmDSL24HrRxTruncatedNumber of frames truncated due to receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.3 |
cmDSL24HrRxBigNumber of receive frames that were discarded because they were
too large.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.4 |
cmDSL24HrRxAbortsNumber of aborted frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.5 |
cmDSL24HrRxAlignmentErrorsNumber of unaligned frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.6 |
cmDSL24HrRxCRCErrorsNumber of frames received with CRC errors.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.7 |
cmDSL24HrRxOverrunsNumber of frames discarded because of receiver overruns.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.8 |
cmDSL24HrRxValidFramesNumber of valid frames received.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.9 |
cmDSL24HrTxValidFramesNumber of frames transmitted successfullyro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.10 |
cmDSL24HrRxNoBuffersNumber of receive frames discarded due to lack of buffers.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.11 |
cmDSL24HrMinNoiseMarginMinimum noise margin encountered in the interval associated
with thus table. Noise Margin ins not a measurable parameter
for IDSL ports; therfore this value will always be 0 for IDSL
ports.ro INTEGER .1.3.6.1.4.1.1996.10.7.5.1.12 |
cmDSL24HrRxValidOctetsNumber of octets received in valid frames by the DSL port
in the interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.13 |
cmDSL24HrTxValidOctetsNumber of octets transmitted over the DSL port in the
interval associated with this table.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.14 |
cmDSL24HrPortUpTimeNumber of seconds that the DSL port was enbabled during the
associated interval.ro PerfTotalCount .1.3.6.1.4.1.1996.10.7.5.1.15 |
cmCpeDSLIntervalTableDsl Port info about Perf Counters SEQUENCE OF CmCpeDSLIntervalEntry .1.3.6.1.4.1.1996.10.7.6 |
cmCpeDSLIntervalEntryDsl Port Performance Monitoring Counters CmCpeDSLIntervalEntry .1.3.6.1.4.1.1996.10.7.6.1 |
cmCpeDSLIntervalIndexDSL port (interface) number (i.e ifIndex)ro INTEGER .1.3.6.1.4.1.1996.10.7.6.1.1 |
cmCpeDSLIntervalNumberA value between 1 and 24, where 1 is the most
recent hour interval and 24 is the oldest hour intervalro INTEGER .1.3.6.1.4.1.1996.10.7.6.1.2 |
cmCpeDSLIntervalTxUnderrunsNumber of transmit underruns detected.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.3 |
cmCpeDSLIntervalRxTruncatedNumber of frames truncated due to receiver overruns.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.4 |
cmCpeDSLIntervalRxBigNumber of receive frames that were discarded because they were
too large.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.5 |
cmCpeDSLIntervalRxAbortsNumber of aborted frames received.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.6 |
cmCpeDSLIntervalRxAlignmentErrorsNumber of unaligned frames received.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.7 |
cmCpeDSLIntervalRxCRCErrorsNumber of frames received with CRC errors.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.8 |
cmCpeDSLIntervalRxOverrunsNumber of frames discarded because of receiver overruns.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.9 |
cmCpeDSLIntervalRxValidFramesNumber of valid frames received.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.10 |
cmCpeDSLIntervalTxValidFramesNumber of frames transmitted successfullyro Counter .1.3.6.1.4.1.1996.10.7.6.1.11 |
cmCpeDSLIntervalRxNoBuffersNumber of receive frames discarded due to lack of buffers.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.12 |
cmCpeDSLIntervalRxValidOctetsNumber of valid octets received.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.13 |
cmCpeDSLIntervalTxValidOctetsNumber of valid octets transmitted.ro Counter .1.3.6.1.4.1.1996.10.7.6.1.14 |
cmIDSL OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.8 |
cmIDSLModemTableThe IDSL Port Information table for Configuration and
Management of IDSL ports. SEQUENCE OF CmIDSLModemEntry .1.3.6.1.4.1.1996.10.8.1 |
cmIDSLModemEntryAn entry in the IDSL Port Information table. CmIDSLModemEntry .1.3.6.1.4.1.1996.10.8.1.1 |
cmIDSLModemIndexThe value of this object indicates the combination of shelf,
port and slot number (i.e ifIndex).ro CmObjectPII .1.3.6.1.4.1.1996.10.8.1.1.1 |
cmIDSLModemOperStateThe value of this object indicates the operability state of this port.ro Enumeration .1.3.6.1.4.1.1996.10.8.1.1.2 |
cmIDSLModemDataRateThis object sets/displays the data rate, in kbps, for this port on a line card
If the port is on an IDSL CPE this object only displays the data rate.rw Enumeration .1.3.6.1.4.1.1996.10.8.1.1.3 |
cmIDSLModemStateThis object indicates the internal IDSL state. The value
'activatedCpeDectected' will indicate trained and CPE detected on far end.ro Enumeration .1.3.6.1.4.1.1996.10.8.1.1.4 |
cmIDSLModemTerminationModeThis object indicates the current operational mode of each port.
All ports will operate in line terminated mode with the exception of
except port #1 when it is being used to aquire network timing.
(see cmIDSLBoardTimingMode for further details)ro Enumeration .1.3.6.1.4.1.1996.10.8.1.1.5 |
cmIDSLModemCpeCodeThe value of this object describes certain charateristics that are
unique to this CPE. For example line polarity, di-bit ordering,
preactiviation signaling, etc. The CpeCode for a specific
manufacturer's CPE is assigned and distributed by Copper Mountain
Networks.rw INTEGER .1.3.6.1.4.1.1996.10.8.1.1.6 |
cmIDSLModemSuccessfulTrainsThe is the number of successful trains for this port. This value is
zero at powerup. This value is cleared whenver the operator changes
the data rate for the port, or whenever the operator sets this object
to 0.ro Counter .1.3.6.1.4.1.1996.10.8.1.1.7 |
cmIDSLModemFailedTrainingAttemptsThe is the number of failed training atttempts for this port. This
value is zero at powerup. This value is cleared whenver the operator
changes the data rate for the port, or whenever the operator sets this
object to 0.ro Counter .1.3.6.1.4.1.1996.10.8.1.1.8 |
cmIDSLModemCpeResponsesThe is the number of CPE responses to training sequences that have
been seen on this port. The responses may lead to successful trains
or not. This value is zero at powerup. This value is cleared whenver
the operator changes the data rate for the port, or whenever the
operator sets this object to 0.ro Counter .1.3.6.1.4.1.1996.10.8.1.1.9 |
cmIDSLModemNetworkElementsThe value of this object indicates the current number of network
elements in the loop including the CPE. This value will be
'invalid' when the LC modem is in NT mode. It will be 'unknown'
when the number of elements has yet to be determined.ro Enumeration .1.3.6.1.4.1.1996.10.8.1.1.10 |
cmIDSLModemActivationIntervalThis is the re-training frequency (in seconds). Upon unsuccessful
training, the LC shall wait cmIDSLModemActivationInterval seconds
before attempting to retry.
Default: 5 (also, sets of 0 are translated to 5)rw INTEGER .1.3.6.1.4.1.1996.10.8.1.1.11 |
cmCpeIDSLModemTableThe IDSL Port Information table for Configuration and
Management of IDSL ports. SEQUENCE OF CmCpeIDSLModemEntry .1.3.6.1.4.1.1996.10.8.2 |
cmCpeIDSLModemEntryAn entry in the IDSL Port Information table. CmCpeIDSLModemEntry .1.3.6.1.4.1.1996.10.8.2.1 |
cmCpeIDSLModemIndexThe value of this object indicates the combination of shelf,
port and slot number (i.e ifIndex).ro CmObjectPII .1.3.6.1.4.1.1996.10.8.2.1.1 |
cmCpeIDSLModemOperStateThe value of this object indicates the operability state of this port.ro Enumeration .1.3.6.1.4.1.1996.10.8.2.1.2 |
cmCpeIDSLModemDataRateThis object sets/displays the data rate, in kbps, for this port on a line card
If the port is on an IDSL CPE this object only displays the data rate.ro Enumeration .1.3.6.1.4.1.1996.10.8.2.1.3 |
cmCpeIDSLModemStateThis object indicates the internal IDSL state.ro Enumeration .1.3.6.1.4.1.1996.10.8.2.1.4 |
cmCpeIDSLModemTerminationModeThis object indicates the current operational mode of each port.
All ports will operate in line terminated mode with the exception of
except port #1 when it is being used to aquire network timing.
(see cmIDSLBoardTimingMode for further details)ro Enumeration .1.3.6.1.4.1.1996.10.8.2.1.5 |
cmFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.9 |
cmFrDlcmiTableThe Parameters for the Data Link Connection Management
Interface for the frame relay service on this
interface. SEQUENCE OF CmFrDlcmiEntry .1.3.6.1.4.1.1996.10.9.1 |
cmFrDlcmiEntryThe Parameters for a particular Data Link Connection
Management Interface. CmFrDlcmiEntry .1.3.6.1.4.1.1996.10.9.1.1 |
cmFrDlcmiIfIndexThe value of this object identifies the WAN port
interface from the shelf, slot, port. PII stands
for Permanent Interface Identifier.ro CmObjectPII .1.3.6.1.4.1.1996.10.9.1.1.1 |
cmFrDlcmiAdminStateThis object is an opertor configurable state that
specifies whether this interface is to be activated.rw Enumeration .1.3.6.1.4.1.1996.10.9.1.1.2 |
cmFrDlcmiOperStateThis object displays the operational state of the
frame relay link. The state is Enabled if:
(1) the physical port ifTableOperStatus is Up,
(2) cmFrDlcmiAdminState is Enabled and
(3)if LMI is enabled on the link, the LMI protocol
layer is up.
Otherwise the state is Disabled.ro Enumeration .1.3.6.1.4.1.1996.10.9.1.1.3 |
cmFrDlcmiFirstDLCIThis object identifies the first DLCI that is assigned to this
DSL link.ro INTEGER .1.3.6.1.4.1.1996.10.9.1.1.4 |
cmFrDlcmiLMIModeIf LMI polling is used, this indicates whether
this circuit is performing polling (DTE) or
is bing polled (DCE), or both (NNI)rw Enumeration .1.3.6.1.4.1.1996.10.9.1.1.5 |
cmFrDlcmiDceN392This gives the time interval in which a
Status Enquiry is expected to be received from
the user. If a Status Enquiry is not received
during this time interval, an error
counter is incremented.rw INTEGER .1.3.6.1.4.1.1996.10.9.1.1.6 |
cmFrDlcmiDceN393This is the number of N392 intervals over
which the error threshold is counted. For
example, if within 'DceN393' number of
events the station receives 'DceN392'
number of errors, the interface is marked as
down.rw INTEGER .1.3.6.1.4.1.1996.10.9.1.1.7 |
cmFrDlcmiDceT392The value of this object the polling verification timer in
units of seconds. The system stops the timer whenever it
receives a STATUS ENQUIRY message from the polling device and
starts the timer when it responds with a STATUS message. If
the timer expries it indicates an error in the polling process.rw INTEGER .1.3.6.1.4.1.1996.10.9.1.1.8 |
cmFrDlcmiRcvUnknownDLCIThe number of frames with an unknown DLCI received
on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.10 |
cmFrDlcmiLMITxStatusEnquiriesThe total number of LMI status enquiries sent by the
DTE on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.11 |
cmFrDlcmiLMITxStatusResponsesThe total number of LMI status responses sent
by the DCE on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.12 |
cmFrDlcmiLMIRxStatusEnquiriesThe total number of LMI status enquiries received
by the DCE on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.13 |
cmFrDlcmiLMIRxStatusResponsesThe total number of LMI status responses received
by the DTE on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.14 |
cmFrDlcmiLMIRxUpdatesThe total number of LMI status updates received
by the DTE on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.15 |
cmFrDlcmiUnknownLMIMessagesRcvdThe total number of unknown LMI messages received
on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.16 |
cmFrDlcmiLostLMISequencesThe total number of times a loss of sequencing
in received LMI messages was detected
by the DTE on this interface.ro Counter .1.3.6.1.4.1.1996.10.9.1.1.17 |
cmFrCircuitTableA table containing information about specific Data
Link Connection Identifiers and corresponding virtual
circuits. SEQUENCE OF CmFrCircuitEntry .1.3.6.1.4.1.1996.10.9.2 |
cmFrCircuitEntryThe information regarding a single Data Link
Connection Identifier. CmFrCircuitEntry .1.3.6.1.4.1.1996.10.9.2.1 |
cmFrCircuitIfIndexThe ifIndex Value of the ifEntry this virtual
circuit is layered onto.ro CmObjectPII .1.3.6.1.4.1.1996.10.9.2.1.1 |
cmFrCircuitDlciThe Data Link Connection Identifier for this
virtual circuit.ro DLCI .1.3.6.1.4.1.1996.10.9.2.1.2 |
cmFrCircuitOperStateThis object displays the operational state of a PVC.
The state is Enabled if:
(1) cmFrDlcmiOperState is Enabled for the frame relay
link,
(2) frCircuitState is Active,
(3) if LMI is enabled on the link, the frame
relay DCE or NNI peer reports the PVC status
as Active,
(4) if the PVC is configured in Frame Mux mode, the
PVC to which this cmFrCircuit is mapped is Active.
Otherwise the state is Disabled.ro Enumeration .1.3.6.1.4.1.1996.10.9.2.1.3 |
cmFrCircuitFramesDroppedTxUnavailNumber of Tx frames which were dropped on this
circuit because the link was down or the permanent
virtual circuit was inactive.ro Counter .1.3.6.1.4.1.1996.10.9.2.1.4 |
cmFrCircuitFramesDroppedRxUnavailNumber of Rx frames which were dropped on this
circuit because the link was down or the permanent
virtual circuit was inactive.ro Counter .1.3.6.1.4.1.1996.10.9.2.1.5 |
cmFrCircuitFramesDroppedExcessNumber of frames which were dropped on this circuit
because the hold queue was full.ro Counter .1.3.6.1.4.1.1996.10.9.2.1.6 |
cmATM OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.10 |
cmAtmVclTableThe configuration parameters for the ATM VC on this interface. SEQUENCE OF CmAtmVclEntry .1.3.6.1.4.1.1996.10.10.1 |
cmAtmVclEntryThe configuration parameters for a particular ATM VC. CmAtmVclEntry .1.3.6.1.4.1.1996.10.10.1.1 |
cmAtmVclPIIThis is the index into this table. This is the PII of the DS3
port used for this ATM interface together with the link identifier
for the VCL.ro CmObjectPII .1.3.6.1.4.1.1996.10.10.1.1.1 |
cmAtmVclVpiThe VPI value of the VCL.
NOTE: Vpi 0 is reserved for ATM Link Management functions.rw INTEGER .1.3.6.1.4.1.1996.10.10.1.1.2 |
cmAtmVclVciThe VCI value of the VCL.
NOTE: Vci values 0-31 are reserved for Path management functions.rw INTEGER .1.3.6.1.4.1.1996.10.10.1.1.3 |
cmAtmVclAdminStatusThis object is instanciated only for a VCL which terminates a VCC
(i.e., one which is NOT cross-connected to other VCLs). Its value
specifies the desired administrative state of the VCL. In the
system, setting this value to Down will disable the VC from
transporting user data. Setting this value to Up allows the VC to
be available for trsporting user data traffic.
DEFAULT: Downrw Enumeration .1.3.6.1.4.1.1996.10.10.1.1.4 |
cmAtmVclOperStatusThe current operational status of the VCL.ro Enumeration .1.3.6.1.4.1.1996.10.10.1.1.5 |
cmAtmVclLastChangeThe value of sysUpTime at the time this VCL entered its current
operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.10.10.1.1.6 |
cmAtmVclAalTypeAn instance of this object only exists when the local VCL
end-point is also the VCC end-point, and AAl is in use. It is the
type of AAL used on this VCC. The AAl type includes AAL1, AAL2,
AAL3/4, and AAL5. The other(4) may be a user-defined AAL type.
The unkown type indicates that the AAL type cannot be determined.
DEFAULT: Aal5ro Enumeration .1.3.6.1.4.1.1996.10.10.1.1.7 |
cmAtmVclAal5CpcsTransmitSduSizeAn instance of this object only exists when the local VCL
end-point is also the VCC end-point, and AAL5 is in use. It is
the maximum AAl5 CPCS SDU size, in octets, that is supported on the
transmit direction of this VCC.
DEFAULT: 1600ro INTEGER .1.3.6.1.4.1.1996.10.10.1.1.8 |
cmAtmVclAal5CpcsReceiveSduSizeAn instance of this object only exists when the local VCL
end-point is also the VCC end-point, and AAL5 is in use. It is
the maximum AAl5 CPCS SDU size, in octets, that is supported on the
receive direction of this VCC.
DEFAULT: 1600ro INTEGER .1.3.6.1.4.1.1996.10.10.1.1.9 |
cmAtmVclRowStatusThis object is used to create, modify, or delete a row in the
table. To create a new VCL, set this object initially to
'createAndGo' (for sanity checking), or 'Active.' To delete a VCL,
set this entry to 'Destroy.' When reading back an existing VCL,
the RowStatus will always be 'Active.'rw Enumeration .1.3.6.1.4.1.1996.10.10.1.1.10 |
cmDS3AtmTableThis is a proprietary table used to configure some specific
attributes of the DS3-ATM interface that are not defined in any of
the standard MIBs. SEQUENCE OF CmDS3AtmEntry .1.3.6.1.4.1.1996.10.10.2 |
cmDS3AtmEntryThe configuration parameters for a particular DS3-ATM interface. CmDS3AtmEntry .1.3.6.1.4.1.1996.10.10.2.1 |
cmDS3AtmPIIThis is the index into this table.ro CmObjectPII .1.3.6.1.4.1.1996.10.10.2.1.1 |
cmDS3AtmCbitParityEnableThis object enables C-bit Parity checking on the DS3-ATM
interface. If this port is connected to an M23 configured
interface, this field should be set to 'disable.'
DEFAULT: enablerw Enumeration .1.3.6.1.4.1.1996.10.10.2.1.2 |
cmDS3AtmCellPayloadScramblingThis object is used to enable/disable payload scrambling on the
DS3-ATM interface.
DEFAULT: disablerw Enumeration .1.3.6.1.4.1.1996.10.10.2.1.3 |
cmDS3AtmCellMappingThis object is used to configure the physical layer data format
on the DS3-ATM interface.
DEFAULT: hecrw Enumeration .1.3.6.1.4.1.1996.10.10.2.1.4 |
cmIMUX OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.11 |
cmBundleTableThis table contains the currently configured IMUX bundles.
Bundle is a logical entity and represents the collection of
ports. Each entry in the table is represented by bundle PII.
Bundle PIIs are identified with a special slot number of 51. SEQUENCE OF CmBundleEntry .1.3.6.1.4.1.1996.10.11.1 |
cmBundleEntryEach entry in the table represents collection of ports for
the IMUX bundle. An entry in the table is indexed by bundle PII.
(Bundle PII is a logical entity identified by the slot number
value of 51). This entry will contain PII, EndPointID and status
information of all the ports that are part of this bundle. CmBundleEntry .1.3.6.1.4.1.1996.10.11.1.1 |
cmBundlePIIThis value is used as an index into the table. An IMUX BundlePII
is a logical PII and is identified by a logical slot number of of
51.ro CmObjectPII .1.3.6.1.4.1.1996.10.11.1.1.1 |
cmBundleRowStatusThis object is the rowStatus of the IMUX bundle. An IMUX bundle
is enabled by setting this object to 'active' and is destroyed
by setting this object to 'destroy'.rw Enumeration .1.3.6.1.4.1.1996.10.11.1.1.2 |
cmBundleMember1PIIThis is the PII of the first constituent DSL port.rw CmObjectPII .1.3.6.1.4.1.1996.10.11.1.1.3 |
cmBundleMember1EndPointIDThis is the EndPoint ID that uniquely identifies the IMUX CPE connected
to the DSL port indicated by Member1PII.ro OCTET STRING .1.3.6.1.4.1.1996.10.11.1.1.4 |
cmBundleMember1StatusThis object indicates the current status of this DSL port. 'None' indicates
that there is no link configured or the configured link has not trained.
'Active' indicates that the port is trained and available to the transmit
user data. 'waitForAdd' indicates that the link is trained and the system is
waiting for an addition acknowledgement from the IMUX CPE.ro Enumeration .1.3.6.1.4.1.1996.10.11.1.1.5 |
cmBundleMember2PIIThis is the PII of the second constituent DSL port.rw CmObjectPII .1.3.6.1.4.1.1996.10.11.1.1.6 |
cmBundleMember2EndPointIDThis is the EndPoint ID that uniquely identifies the IMUX CPE connected
to the DSL port indicated by Member2PII.ro OCTET STRING .1.3.6.1.4.1.1996.10.11.1.1.7 |
cmBundleMember2StatusThis object indicates the current status of this DSL port. 'None' indicates
that there is no link configured or the configured link has not trained.
'Active' indicates that the port is trained and available to the transmit
user data. 'waitForAdd' indicates that the link is trained and the system is
waiting for an addition acknowledgement from the IMUX CPE.ro Enumeration .1.3.6.1.4.1.1996.10.11.1.1.8 |
cmBundleMember3PIIThis is the PII of the third constituent DSL port.rw CmObjectPII .1.3.6.1.4.1.1996.10.11.1.1.9 |
cmBundleMember3EndPointIDThis is the EndPoint ID that uniquely identifies the IMUX CPE connected
to the DSL port indicated by Member3PII.ro OCTET STRING .1.3.6.1.4.1.1996.10.11.1.1.10 |
cmBundleMember3StatusThis object indicates the current status of this DSL port. 'None' indicates
that there is no link configured or the configured link has not trained.
'Active' indicates that the port is trained and available to the transmit
user data. 'waitForAdd' indicates that the link is trained and the system is
waiting for an addition acknowledgement from the IMUX CPE.ro Enumeration .1.3.6.1.4.1.1996.10.11.1.1.11 |
cmBundleMember4PIIThis is the PII of the fourth constituent DSL port.rw CmObjectPII .1.3.6.1.4.1.1996.10.11.1.1.12 |
cmBundleMember4EndPointIDThis is the EndPoint ID that uniquely identifies the IMUX CPE connected
to the DSL port indicated by Member4PII.ro OCTET STRING .1.3.6.1.4.1.1996.10.11.1.1.13 |
cmBundleMember4StatusThis object indicates the current status of this DSL port. 'None' indicates
that there is no link configured or the configured link has not trained.
'Active' indicates that the port is trained and available to the transmit
user data. 'waitForAdd' indicates that the link is trained and the system is
waiting for an addition acknowledgement from the IMUX CPE.ro Enumeration .1.3.6.1.4.1.1996.10.11.1.1.14 |
cmDataPort OBJECT IDENTIFIER .1.3.6.1.4.1.1996.10.12 |
cmCpeDataPortTableThis table contains configuration and status information for the
EIA530 ports. The index for this table is the PII of the system port
connected to one of the IMUX DSL ports. SEQUENCE OF CmCpeDataPortEntry .1.3.6.1.4.1.1996.10.12.1 |
cmCpeDataPortEntryEach entry in the table contains configuration and status information
for a data port. The index for this table is the PII of the system port
connected to one of the IMUX DSL ports. CmCpeDataPortEntry .1.3.6.1.4.1.1996.10.12.1.1 |
cmCpeDataPortIndexPII of the system port connected to one of the IMUX DSL ports.ro CmObjectPII .1.3.6.1.4.1.1996.10.12.1.1.1 |
cmCpeDataPortTypeData Port Type i.e. EIA-530 or V.35.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.2 |
cmCpeDataPortForceDSRIf enabled, DSR is ON regardless of OperState.rw Enumeration .1.3.6.1.4.1.1996.10.12.1.1.3 |
cmCpeDataPortIgnoreDTRIf this object is set to yes, CPE will not monitor DTR signal line.
If set to no, CPE will de-assert DCD if DTR signal is OFF.rw Enumeration .1.3.6.1.4.1.1996.10.12.1.1.4 |
cmCpeDataPortIgnoreRTSIf this object is set to yes, CPE will not monitor RTS signal line.
If set to no, CPE will de-assert DCD if RTS signal is OFF.rw Enumeration .1.3.6.1.4.1.1996.10.12.1.1.5 |
cmCpeDataPortTerminalTimingIf this object is set to yes, CPE will assert terminal timing.rw Enumeration .1.3.6.1.4.1.1996.10.12.1.1.6 |
cmCpeDataPortTMCurrent state of TM signal. It is asserted when LL is ON.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.7 |
cmCpeDataPortLLCurrent state of LL signal. Local loopback is generated by DTE
device.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.8 |
cmCpeDataPortRLCurrent state of RL signal. Remote loopback is generated by DTE
device.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.9 |
cmCpeDataPortDTRCurrent state of DTR signal.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.10 |
cmCpeDataPortRTSCurrent state of RTS signal.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.11 |
cmCpeDataPortDSRCurrent state of DSR signal. DSR is on if OperState value is enabled
or testing.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.12 |
cmCpeDataPortCTSCurrent state of CTS signal.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.13 |
cmCpeDataPortDCDCurrent state of DCD signal.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.14 |
cmCpeDataPortTxClockSourceIndicates whether the clock source is internal or external.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.15 |
cmCpeDataPortDTEDCEIndicates whether the port is operating as DTE or DCE.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.16 |
cmCpeDataPortCRCIndicates the type of CRC used on packets.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.17 |
cmCpeDataPortClockRateClock rate of port in bps(bits per second). Defaults to 1544000 for
loopback. Default to 1544000 for loopback.ro INTEGER .1.3.6.1.4.1.1996.10.12.1.1.18 |
cmCpeDataPortAdminStateCurrent administrative state of the port.rw Enumeration .1.3.6.1.4.1.1996.10.12.1.1.19 |
cmCpeDataPortOperStateCurrent operational state of the the port. Allowed values are
diabled, enabled, testing.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.20 |
cmCpeDataPortLoopbackConfigLoopback configuration state of the port.rw Enumeration .1.3.6.1.4.1.1996.10.12.1.1.21 |
cmCpeDataPortLoopbackStatusLoopback status of the port.ro Enumeration .1.3.6.1.4.1.1996.10.12.1.1.22 |
cmCpeDataPortIntervalTableThis table provides the transmit and receive statistics for the
data ports. Sampling inteval is 15 minutes and each data port contains
at the most 96 intervals. Interval number 1 represents the current
interval. The index for this table is the PII of the system port connected
to one of the IMUX DSL ports and the interval number. SEQUENCE OF CmCpeDataPortIntervalEntry .1.3.6.1.4.1.1996.10.12.2 |
cmCpeDataPortIntervalEntryEach entry in the table contains the transmit and receive statistics for
a data port. The index for this table is the PII of the system port connected
to one of the IMUX DSL ports and the interval number. CmCpeDataPortIntervalEntry .1.3.6.1.4.1.1996.10.12.2.1 |
cmCpeDataPortIntervalIndexPII of the system port connected to one of the IMUX DSL ports.ro CmObjectPII .1.3.6.1.4.1.1996.10.12.2.1.1 |
cmCpeDataPortIntervalIntervalNumberInterval number. Interval durations is 15 minutes. Interval number 1
represents the current interval.ro INTEGER .1.3.6.1.4.1.1996.10.12.2.1.2 |
cmCpeDataPortIntervalRxFramesNumber of frames received on the data port in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.3 |
cmCpeDataPortIntervalRxOctetsNumber of octets received on the data port in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.4 |
cmCpeDataPortIntervalRxDiscardsNumber of received frames discarded in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.5 |
cmCpeDataPortIntervalRxErrorsNumber of erred frames received on the data port in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.6 |
cmCpeDataPortIntervalTxFramesNumber of frames transmitted on the data port in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.7 |
cmCpeDataPortIntervalTxOctetsNumber of octets transmitted on the data port in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.8 |
cmCpeDataPortIntervalTxDiscardsNumber of transmission intended frames discarded in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.9 |
cmCpeDataPortIntervalTxErrorsNumber of erred frames transmitted on the data port in this interval.ro Counter .1.3.6.1.4.1.1996.10.12.2.1.10 |
cmCpeDataPortTotalTableThis table provides the transmit and receive statistics for the
data ports since the system was restarted. The index for this table
is the PII of the system port connected to one of the IMUX DSL ports. SEQUENCE OF CmCpeDataPortTotalEntry .1.3.6.1.4.1.1996.10.12.3 |
cmCpeDataPortTotalEntryEach entry in the table contains the transmit and receive statistics for
a data port. The index for this table is the PII of the system port connected
to one of the IMUX DSL ports. CmCpeDataPortTotalEntry .1.3.6.1.4.1.1996.10.12.3.1 |
cmCpeDataPortTotalIndexPII of the system port connected to one of the IMUX DSL ports.ro CmObjectPII .1.3.6.1.4.1.1996.10.12.3.1.1 |
cmCpeDataPortTotalRxFramesTotal number of frames received on the data port since the system
was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.2 |
cmCpeDataPortTotalRxOctetsTotal number of octets received on the data port since the system
was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.3 |
cmCpeDataPortTotalRxDiscardsTotal number of received frames discarded on the data port since the
system was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.4 |
cmCpeDataPortTotalRxErrorsTotal number of erred frames received on the data port since the
system was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.5 |
cmCpeDataPortTotalTxFramesTotal number of frames transmitted on the data port since the system
was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.6 |
cmCpeDataPortTotalTxOctetsTotal number of octets transmitted on the data port since the system
was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.7 |
cmCpeDataPortTotalTxDiscardsTotal number of transmission intended frames discarded on the data port
since the system was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.8 |
cmCpeDataPortTotalTxErrorsTotal number of erred frames transmitted on the data port since the system
was restarted.ro Counter .1.3.6.1.4.1.1996.10.12.3.1.9 |
cmCE200 OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20 |
cmSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.1 |
cmSysObjectClassThis is the Copper Mountain object class of this system.ro Enumeration .1.3.6.1.4.1.1996.20.1.1 |
cmSysOperStateThis is the current operability state of this resource.ro Enumeration .1.3.6.1.4.1.1996.20.1.2 |
cmSysMasterDEPRECATED. No longer supported.ro INTEGER .1.3.6.1.4.1.1996.20.1.3 |
cmSysTrapAddressObsoleted 4/1/99.
IP Address of the SNMP Manager to which traps are sent.obsolete IpAddress .1.3.6.1.4.1.1996.20.1.4 |
cmSysConfigFileNameThe FileName of the saved configuration filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.1.5 |
cmSysCommandSetting this object issues command for the system to execute. A GET on this
object is the last operator command issued.rw Enumeration .1.3.6.1.4.1.1996.20.1.6 |
cmSysCommandStatusThis is the status of the last operator-issued command.ro Enumeration .1.3.6.1.4.1.1996.20.1.7 |
cmSysVersionThis is the system version, type major.minorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.1.8 |
cmSysCalendarTimeThe calendar time on the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.1.9 |
cmSysPrimaryPIIThis is the PII of the SCM acting as primaryro CmObjectPII .1.3.6.1.4.1.1996.20.1.10 |
cmSysSecondaryPIIThis is the PII of the SCM acting as secondaryro CmObjectPII .1.3.6.1.4.1.1996.20.1.11 |
cmSysRedundancyIf enabled, the secondary can takeover as primary.rw Enumeration .1.3.6.1.4.1.1996.20.1.12 |
cmSysConfigSynchCurrent sate of system configuration: Saved indicates configuration is
saved on both the Primary and Secondary SCMs for a redundant system;
and on the local SCM for a non-redundant system. NotSaved indicates
operator has made configuration changes, but not saved them.ro Enumeration .1.3.6.1.4.1.1996.20.1.13 |
cmSysMyPIIThis is the PII of the SCM to which you are currently attached.ro CmObjectPII .1.3.6.1.4.1.1996.20.1.14 |
cmSysShelfCountThe number of shelves currently reporting as part of the system.ro INTEGER .1.3.6.1.4.1.1996.20.1.15 |
cmSysExpIpSubNetThe IP address will be interpreted as a class C subnetwork for
internal use in the system. Addresses from the subnetwork will be
used to assign each expansion SCM an IP address to be used for
loading. Operators must insure this address range does not
conflict with other addresses assigned and provide any necessary
security filtering to prevent external access.
The format of the class C subnetwork should be:
A.B.C.0 where A, B and C are (0-255).rw IpAddress .1.3.6.1.4.1.1996.20.1.16 |
cmBoard OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.2 |
cmBoardTableThe Board Information table for Configuration and
Management of Boards. SEQUENCE OF CmBoardEntry .1.3.6.1.4.1.1996.20.2.1 |
cmBoardEntryAn entry in the Board table. CmBoardEntry .1.3.6.1.4.1.1996.20.2.1.1 |
cmBoardIndexAn Unique index for the Board.ro INTEGER .1.3.6.1.4.1.1996.20.2.1.1.1 |
cmBoardObjectClassThe value of this object defines the object class
associated with this board.
NOTE: For this object, only 'Board' and 'brd*' classes are used.ro Enumeration .1.3.6.1.4.1.1996.20.2.1.1.2 |
cmBoardOperStateThis gives the Operation-state of the Board.ro Enumeration .1.3.6.1.4.1.1996.20.2.1.1.3 |
cmBoardUpTimeThis value indicates the elapsed time since the board last
powered up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.2.1.1.4 |
cmBoardFileNameThe name of the file downloaded to this board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.5 |
cmBoardFileDateThe date/time that the downloaded file was built.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.6 |
cmBoardHwTypeThis is the system board type.ro Enumeration .1.3.6.1.4.1.1996.20.2.1.1.7 |
cmBoardNumPortsThis is the number of ports on this board.ro INTEGER .1.3.6.1.4.1.1996.20.2.1.1.8 |
cmBoardHwVersionThis is the hardware version of this board described in the format
<major rev>.<minor rev>. For example: 1.0ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.9 |
cmBoardSwVersionThis is the software version of this board described in the
format <major rev>.<minor rev>.<buildnumber>. For example, 1.0.6.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.10 |
cmBoardPromVersionThis is the PROM software version described in the format
<major rev>.<minor rev>. For example: 1.0.6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.11 |
cmBoardRoleThis is the role of this board in the system.ro Enumeration .1.3.6.1.4.1.1996.20.2.1.1.12 |
cmBoardConfigChangeThis is the calendar time when the configuration was last changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.13 |
cmBoardCommandLists the last operational command issued (get) or it issues (sets)
a command as specified above .rw Enumeration .1.3.6.1.4.1.1996.20.2.1.1.14 |
cmBoardSerialNumberThis is the serial number of the board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.15 |
cmBoardClusterRoleSCMs are either 'master' (have WAN interfaces) or 'expansion'.
Redundant Bays have 1 'master' on each side (left and right).
This object is marked as 'notApplicable' for all other boards.ro Enumeration .1.3.6.1.4.1.1996.20.2.1.1.16 |
cmBoardInformationThis is additional information about this particular board in
the system. The contents of the field are defined by the
specific type of board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.2.1.1.17 |
cmIDSLBoardTableThe addition information beyond that contained in the cmBoardTable
required to configure and manage an IDSL Line Card. SEQUENCE OF CmIDSLBoardEntry .1.3.6.1.4.1.1996.20.2.2 |
cmIDSLBoardEntryAn entry in the Board table. CmIDSLBoardEntry .1.3.6.1.4.1.1996.20.2.2.1 |
cmIDSLBoardIndexThe value of this object indicates the combination of shelf,
port and slot number (i.e ifIndex).ro CmObjectPII .1.3.6.1.4.1.1996.20.2.2.1.1 |
cmIDSLBoardTimingModeThe value of this object defines the IDSL line card's timing
mode as follows:
internallyTimed - The IDSL line card provides an internally
generated clock to all ports on the card.
locallyTimed - the IDSL Line Card acquires it's clock from port #1
and distributes it to the all other ports on this card.
networkTimedSlave - the IDSL Line Card aquires timing from the
backplane. If the backplance clock is missing it provides internal
timing to all ports on this card.
networkTimedMaster - The IDSL Line Card aquires a clock
according to the following protocol:
a) aquire clock from port #1 and distribute it both
locally and across the backplane.
b) if step a) fails then aquire the clock from the backplane.
c) if steps a) and b) both fail provide internal timing to all
ports on this card.
networkBackup - The IDSL Line Card aquires a clock for this
shelf according to the following protocol:
a) aquire clock from the backplane.
b) if step a) fails then aquire the clock from port #1 and
distribute this clock locally on this card and across the backplane.
c) if steps a) and b) both fail provide internal timing to all
ports on this card.rw Enumeration .1.3.6.1.4.1.1996.20.2.2.1.2 |
cmIDSLBoardTimingStatusThe value of this object indicates how the IDSL Line Card is
currently deriving timing. (See TimingMode for a description of
possible timing derivation scenarios). The possible values of
cmIDSLBoardTimingStatus are as follows:
internallyTimed - The IDSL Line Card is currently deriving timing
for all of it's ports via internal timing.
locallyTimed - The IDSL Line Card is currently aquiring network
timing from it's port #1 and then distributing it to all ports
on this card.
networkTimedSlave - The IDSL Line Card is currently aquiring
network timing from the backplane.
networkTimedMaster - The IDSL Line Card is currently aquiring
network timing from it's port #1 and then distributing it to all
ports on this card aas well as the backplane.ro Enumeration .1.3.6.1.4.1.1996.20.2.2.1.3 |
cmIDSLBoardTimingAvailableThis value indicates wether or not the IDSL Line Card's timing
source is valid. The status values are defined as follows:
yes - Indicates that this IDSL Line Card is configured as a
Globally Timed Master or Globally Timed Backup, and port #1 on this
IDSL Line Card is trained, e.g. it can acquire timing from port #1.
no - Indicates that this IDSL Line Card is configured as a
Globally Timed Master or Globally Timed Backup, and Port #1 on this
IDSL Line Card is not trained, e.g. it cannot acquire a clock from
port 1. A value of no can also indicate that there is no way to
determine whether timing is available because this IDSL Line Card
is either Locally Timed,Internally Timed, or Globally Timed Slave.ro Enumeration .1.3.6.1.4.1.1996.20.2.2.1.4 |
cmState OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.3 |
cmStateTableThe State Information table for the Control and
Management of the State of System, Shelf, Board, Port
and Link. SEQUENCE OF CmStateEntry .1.3.6.1.4.1.1996.20.3.1 |
cmStateEntryAn entry in the DSL Port Information table. CmStateEntry .1.3.6.1.4.1.1996.20.3.1.1 |
cmStateGenericClassThe value of this object is the generic object class
of this resource.ro Enumeration .1.3.6.1.4.1.1996.20.3.1.1.1 |
cmStateIndexThe value of this object identifies the specific resource
in the object class.ro INTEGER .1.3.6.1.4.1.1996.20.3.1.1.2 |
cmStateObjClassThe value of this object indicates the Object class
of the resource.ro Enumeration .1.3.6.1.4.1.1996.20.3.1.1.3 |
cmStateOperStateThe value of this object indicates the current operability
state of the resource.ro Enumeration .1.3.6.1.4.1.1996.20.3.1.1.4 |
cmStateLastChangeThis value indicates the value of uptime at last change.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.3.1.1.5 |
cmShelf OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.4 |
cmShelfTableThe shelf information table for the control and
management of the state of a shelf. SEQUENCE OF CmShelfEntry .1.3.6.1.4.1.1996.20.4.1 |
cmShelfEntryAn entry in the shelf information table to contain
configuration and status info specific to the shelf. CmShelfEntry .1.3.6.1.4.1.1996.20.4.1.1 |
cmShelfIndexThe value of this object identifies the unique index
for the shelf.ro CmObjectPII .1.3.6.1.4.1.1996.20.4.1.1.1 |
cmShelfObjectClassThe value of this object identifies the Object
class to which this shelf belongs. The object class identifies
the physical packaging of the shelf. Below is a diagram of the
ce200Shelf.
NOTE: For this object, only 'shelf*' classes are used.
| | | | | | | | | | | | | | | | | | | |
|P |S |W |W |B |D |D |D |D |D |D |D |D |B |S |W |W |P | |
|W |C |A |A |C |S |S |S |S |S |S |S |S |C |C |A |A |W | |
|R |M |N |N |M |L |L |L |L |L |L |L |L |M |M |N |N |R | |
| | | | | |M |M |M |M |M |M |M |M | | | | | | |
slot 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18ro Enumeration .1.3.6.1.4.1.1996.20.4.1.1.2 |
cmShelfOperabilityThe value of this object identifies the current
operability state of this shelf.ro Enumeration .1.3.6.1.4.1.1996.20.4.1.1.3 |
cmShelfUpTimeThe value of this object indicates the elapsed since
shelf was last powered up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.4.1.1.4 |
cmShelfMasterThe value of this object identifies the SCM board
operating as the shelf master.ro INTEGER .1.3.6.1.4.1.1996.20.4.1.1.5 |
cmShelfBoardMapThe value of this object is a bit map of boards in the shelf,
for example bit 0 = Fan, bit 1 = slot1, bit 2 = slot 2 .ro OCTET STRING .1.3.6.1.4.1.1996.20.4.1.1.6 |
cmShelfCommandThis object allows a single shelf to be restarted vs.
restarting the entire system.rw Enumeration .1.3.6.1.4.1.1996.20.4.1.1.7 |
cmShelfShelfNumberThe value of this object indicates the configured
position of this shelf. If the value of this object
is set to one, it is configured to be the first shelf
on the rack. If the value of this object is set to
two, this shelf is the second shelf on the rack.ro INTEGER .1.3.6.1.4.1.1996.20.4.1.1.8 |
cmFile OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.5 |
cmFileBootDeviceThe value of this object is the type of Device that the system booted
from.ro Enumeration .1.3.6.1.4.1.1996.20.5.1 |
cmFileFSNameThis is the name of the file server being used as a default
for file operations for this system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.5.2 |
cmFileFSAddrIP Address of the remote file server that contains the CMN software. If the
system doesn' find a requested file locally, it will attempt to load the specified
file from this remote file server.rw IpAddress .1.3.6.1.4.1.1996.20.5.3 |
cmFileFSUsernameThis is the user name that will be used on all the FTP requests to the remote
file server specified in cmFileFSAddr.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.5.4 |
cmFileFSPasswordThis is the password that will be used on all FTP requests to the remote file
server specified in cmFileFSAddr. When read back, this password will alwasys
display ****.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.5.5 |
cmFileFLASHDirThis is the root directory path on the flash file server that
contains the files for this system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.5.6 |
cmFileFSDirThis is the base directory name that will be used for all requests to the remote
FTP server specified in the cmFileFSAddr. An appropriate subdirectory name based
on the same directory structure used in the flash will be appended to the base
directory.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.5.7 |
cmCpeBoard OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.6 |
cmCpeBoardTableBoard Information table for Configuration and
Management of CPE Boards. SEQUENCE OF CmCpeBoardEntry .1.3.6.1.4.1.1996.20.6.1 |
cmCpeBoardEntryAn entry in the Board table. CmCpeBoardEntry .1.3.6.1.4.1.1996.20.6.1.1 |
cmCpeBoardIndexThis is the PII of the CPE connected to the system.
The decimal format is: fabbccdddd. Where f=1 for a CPE,
a is the shelf, bb is the slot and cc is the port.
dddd is always 0000 for a CPE.ro INTEGER .1.3.6.1.4.1.1996.20.6.1.1.1 |
cmCpeBoardObjectClassThe value of this object defines the object class
associated with this CPE.
NOTE: For this object, only 'cr*' or 'netopia*' classes are used.ro Enumeration .1.3.6.1.4.1.1996.20.6.1.1.2 |
cmCpeBoardOperStateThis gives the Operability state of this CPEro Enumeration .1.3.6.1.4.1.1996.20.6.1.1.3 |
cmCpeBoardUpTimeThis value indicates the elapsed time since the board last powered
up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.6.1.1.4 |
cmCpeBoardFileNameThe name of the file downloaded to this board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.5 |
cmCpeBoardFileDateThe date/time that the downloaded code file was built.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.6 |
cmCpeBoardHwTypeThis is the hardware type of this CPE.ro Enumeration .1.3.6.1.4.1.1996.20.6.1.1.7 |
cmCpeBoardNumPortsThis is the number of ports on this CPE.ro INTEGER .1.3.6.1.4.1.1996.20.6.1.1.8 |
cmCpeBoardHwVersionThis is the hardware version of this board described in the format
<major rev>.<minor rev>. For example: 1.0ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.9 |
cmCpeBoardSwVersionThis is the software version described in the format
<major rev>.<minor rev>. For example: 1.0.6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.10 |
cmCpeBoardPromVersionThis is the PROM software version described in the format
<major rev>.<minor rev>. For example: 1.0.6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.11 |
cmCpeBoardConfigChangeThis is the calendar time when the configuration on this CPE was
last changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.13 |
cmCpeBoardCommandLists the last operational command issued (GET) to the CPE or it
issues (SETs) a command as specified above .rw Enumeration .1.3.6.1.4.1.1996.20.6.1.1.14 |
cmCpeBoardSerialNumberThis is the serial number of the CPE board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.15 |
cmCpeBoardVendorDescriptionThe is a CPE supplied text string that identifies the type of
CPE. This provides a way for a new CPE to be integrated with the
system without requiring changes to the system itself.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.6.1.1.16 |
cmCpeBoardGroupMapEach octet in this string contains a Group ID that identifies a
Copper Mountain database/MIB group that this CPE supports. The
supported database/MIB groups represented by different octet values
are as follows:
56 = cmCpeHDSLModemTable
57 = cmCpeDSLIntervalTable
58 = cmCpeEthernetIntervalTable
64 = cmCpeBoardTable
97 = cmCpeIDSLModemTable
130 = cmCpeDataPortTable
131 = cmCpeDataPortIntervalTable
132 = cmCpeDataPortTotalTablero OCTET STRING .1.3.6.1.4.1.1996.20.6.1.1.17 |
cmCpeBoardManagementOptionsThis is a bit mapped object that defines the management options
supported by this CPE.
Bit0 (LSB) - CMCP Software Download Flag. If this bit is 0, this
CPE does NOT support download through CMCP. If this
bit is 1, this CPE does support download through CMCP.ro INTEGER .1.3.6.1.4.1.1996.20.6.1.1.18 |
cmHSSI OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.7 |
cmHSSITableThe HSSI Information table for Configuration and
Management of HSSI ports. SEQUENCE OF CmHSSIEntry .1.3.6.1.4.1.1996.20.7.1 |
cmHSSIEntryAn entry in the HSSI table. CmHSSIEntry .1.3.6.1.4.1.1996.20.7.1.1 |
cmHSSIIndexUnique identifier for this port described in the format
<shelf>.<slot>.<port>.ro INTEGER .1.3.6.1.4.1.1996.20.7.1.1.1 |
cmHSSIIfIndexThe ifIndex value of this HSSI interface.
The index must be greater than or equal to 1ro INTEGER .1.3.6.1.4.1.1996.20.7.1.1.2 |
cmHSSIDCEReadyInput - indicates whether DCE is ready to transmit data.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.3 |
cmHSSIDTEReadyOutput - indicates whether DTE is ready to transmit data.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.4 |
cmHSSIDTEDCESpecifies the interface type of the port as DTE or DCE.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.5 |
cmHSSILoopbackIndicates the current loopback state of the DTE.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.6 |
cmHSSITestmodeIndicates the current loopback state of the DCE.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.7 |
cmHSSISyncIndicated the presence(sync-on) or absence (sync-off) of HDLC
flags.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.8 |
cmHSSITxClockPresentIndicates whether the transmit clock is detected.ro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.9 |
cmHSSICRCThe CRC format used on all frames received and transmitted by the
HSSI-WAN module. Currently the HSSI-WAN module only supports CRC-16.rw Enumeration .1.3.6.1.4.1.1996.20.7.1.1.10 |
cmHSSIClockRateThe clock rate of port in bits per second (bps). The value of this
object is supplied to this port by the connected equipment. The
value of this object can only be altered when the frDlciLinkEnable
is set to 'disabled'. The new value will not take effect until the
value of the frDlciLinkEnable is set to 'enabled'.
Example: 1544000rw INTEGER .1.3.6.1.4.1.1996.20.7.1.1.11 |
cmHSSIAdminStateThe administrative state of the HSSI portro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.12 |
cmHSSIOperStateThe operational state of the HSSI portro Enumeration .1.3.6.1.4.1.1996.20.7.1.1.13 |
cmV35 OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.8 |
cmV35TableThe V.35 Information table for Configuration and
Management of V.35 ports. SEQUENCE OF CmV35Entry .1.3.6.1.4.1.1996.20.8.1 |
cmV35EntryAn entry in the V.35 table. CmV35Entry .1.3.6.1.4.1.1996.20.8.1.1 |
cmV35IndexUnique identifier for this port described in the format
<shelf>.<slot>.<port>.ro INTEGER .1.3.6.1.4.1.1996.20.8.1.1.1 |
cmV35IfIndexThe ifIndex associated with this port.ro INTEGER .1.3.6.1.4.1.1996.20.8.1.1.2 |
cmV35DSRIndicates the current state of the DSR input signalro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.3 |
cmV35DCDIndicates the current state of the DTE input signal.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.4 |
cmV35CTSIndicates the current state of the CTS input signal.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.5 |
cmV35DTRIndicates the current state of the DTR output signal.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.6 |
cmV35RTSIndicates the current state of the RTS output signal.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.7 |
cmV35DTEDCEIndicates whether the port is operating as a DCE or a DTE.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.8 |
cmV35SyncIf on, indicates the presence of HLDC flags on the physical link.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.9 |
cmV35TxClockSourceIndicates the whether the transmit clock source is internal or
external port.ro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.10 |
cmV35CRCIndicates the type of Cyclical Redundancy Check (CRC) format used
on the transmitted from this port.rw Enumeration .1.3.6.1.4.1.1996.20.8.1.1.11 |
cmV35ClockRateThe clock rate of port in bits per second (bps). Example: 1544000ro INTEGER .1.3.6.1.4.1.1996.20.8.1.1.12 |
cmV35AdminStateThe administrative state of the V.35 portro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.13 |
cmV35OperStateThe operational state of the V.35 portro Enumeration .1.3.6.1.4.1.1996.20.8.1.1.14 |
cmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.9 |
cmTrapEventSeqNumThis object specifies the sequence number of the most recent event.ro INTEGER .1.3.6.1.4.1.1996.20.9.1 |
cmTrapCriticalAlarmCountThis object specifies the number of uncleared critical alarms.ro INTEGER .1.3.6.1.4.1.1996.20.9.2 |
cmTrapMajorAlarmCountThis object specifies the number of uncleared major alarms.ro INTEGER .1.3.6.1.4.1.1996.20.9.3 |
cmTrapMinorAlarmCountThis object specifies the number of uncleared minor alarms.ro INTEGER .1.3.6.1.4.1.1996.20.9.4 |
cmTrapWarningCountThis object specifies the number of uncleared warnings.ro INTEGER .1.3.6.1.4.1.1996.20.9.5 |
cmTrapReceiverTableObsoleted 4/1/99.
This table contains the address and security information for all SNMP
managers that are configured to received traps from the system.obsolete SEQUENCE OF CmTrapReceiverEntry .1.3.6.1.4.1.1996.20.9.6 |
cmTrapReceiverEntryObsoleted 4/1/99.
An entry in the trap receiver table.obsolete CmTrapReceiverEntry .1.3.6.1.4.1.1996.20.9.6.1 |
cmTrapReceiverIPAddrObsoleted 4/1/99.
The value of this object specifies the IP Address of the manager that
is to receive trapsobsolete IpAddress .1.3.6.1.4.1.1996.20.9.6.1.1 |
cmTrapReceiverPortObsoleted 4/1/99.
This object specifies the IP port number of the manager that is to
receive traps.obsolete INTEGER .1.3.6.1.4.1.1996.20.9.6.1.2 |
cmTrapReceiverCommunityObsoleted 4/1/99.
This object specifies the community string for the manager that is to
receive traps.obsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.6.1.3 |
cmTrapReceiverRowStatusObsoleted 4/1/99.
This object controls the creation and deletion of a row in the trap
receiver table.obsolete Enumeration .1.3.6.1.4.1.1996.20.9.6.1.4 |
cmTrapReceiverOwnerStringObsoleted 4/1/99.
The object specifies additional textual information used to identify
and describe the manager that is to receive traps.obsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.6.1.5 |
cmTrapEventLogTableThis table contains the 1000 most recent events. SEQUENCE OF CmTrapEventLogEntry .1.3.6.1.4.1.1996.20.9.7 |
cmTrapEventLogEntryAn entry in the event log table. CmTrapEventLogEntry .1.3.6.1.4.1.1996.20.9.7.1 |
cmTrapEventLogSeqNumThe sequence number of this entry in the event table.ro INTEGER .1.3.6.1.4.1.1996.20.9.7.1.1 |
cmTrapEventLogTypeThis object specifies the type of event.ro Enumeration .1.3.6.1.4.1.1996.20.9.7.1.2 |
cmTrapEventLogObjectClassThe value of this field indicates the system Object Class associated
with the resource reporting the event.ro Enumeration .1.3.6.1.4.1.1996.20.9.7.1.3 |
cmTrapEventLogClassIdThis object specifies the object class that generated the event.ro CmObjectPII .1.3.6.1.4.1.1996.20.9.7.1.4 |
cmTrapEventLogProbableCauseThis object specifies the probable cause of the event.ro INTEGER .1.3.6.1.4.1.1996.20.9.7.1.5 |
cmTrapEventLogSeverityThe value of this field indicates the severity assigned to this event
by the system.ro Enumeration .1.3.6.1.4.1.1996.20.9.7.1.6 |
cmTrapEventLogTimeTagThis object specifies the time that the event occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.7.1.7 |
cmTrapEventLogTextThis object contains any additional information need to describe the
event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.7.1.8 |
cmTrapAlarmLogTableThis table contains the 1000 most recent outstanding alarms. SEQUENCE OF CmTrapAlarmLogEntry .1.3.6.1.4.1.1996.20.9.8 |
cmTrapAlarmLogEntryAn entry in the alarm log table. CmTrapAlarmLogEntry .1.3.6.1.4.1.1996.20.9.8.1 |
cmTrapAlarmLogSeqNumThe sequence number of this entry in the alarm table.ro INTEGER .1.3.6.1.4.1.1996.20.9.8.1.1 |
cmTrapAlarmLogTypeThis object specifies the type of alarm.ro Enumeration .1.3.6.1.4.1.1996.20.9.8.1.2 |
cmTrapAlarmLogObjectClassThe value of this field indicates the system Object Class associated
with the resource reporting the event.ro Enumeration .1.3.6.1.4.1.1996.20.9.8.1.3 |
cmTrapAlarmLogClassIdThis object specifies the object class that generated the alarm.ro CmObjectPII .1.3.6.1.4.1.1996.20.9.8.1.4 |
cmTrapAlarmLogProbableCauseThis object specifies the probable cause of the alarm.ro INTEGER .1.3.6.1.4.1.1996.20.9.8.1.5 |
cmTrapAlarmLogSeverityThe value of this field indicates the severity assigned to this event
by the system.rw Enumeration .1.3.6.1.4.1.1996.20.9.8.1.6 |
cmTrapAlarmLogTimeTagThis object specifies the time that the alarm occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.8.1.7 |
cmTrapAlarmLogTextThis object contains any additional information need to describe the
event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.8.1.8 |
cmTrapTypeLogTableThis table contains the 1000 most recent events sorted first by
internal event type, and second by sequence number. SEQUENCE OF CmTrapTypeLogEntry .1.3.6.1.4.1.1996.20.9.9 |
cmTrapTypeLogEntryAn entry in the Trap Type log table. CmTrapTypeLogEntry .1.3.6.1.4.1.1996.20.9.9.1 |
cmTrapTypeLogTypeThis object specifies the type of event.ro Enumeration .1.3.6.1.4.1.1996.20.9.9.1.1 |
cmTrapTypeLogSeqNumThe sequence number of this entry in the event table.ro INTEGER .1.3.6.1.4.1.1996.20.9.9.1.2 |
cmTrapTypeLogObjectClassThe value of this field indicates the system Object Class associated
with the resource reporting the event.ro Enumeration .1.3.6.1.4.1.1996.20.9.9.1.3 |
cmTrapTypeLogClassIdThis object specifies the object class that generated the event.ro CmObjectPII .1.3.6.1.4.1.1996.20.9.9.1.4 |
cmTrapTypeLogProbableCauseThis object specifies the probable cause of the event.ro INTEGER .1.3.6.1.4.1.1996.20.9.9.1.5 |
cmTrapTypeLogSeverityThe value of this field indicates the severity assigned to this event
by the system.ro Enumeration .1.3.6.1.4.1.1996.20.9.9.1.6 |
cmTrapTypeLogTimeTagThis object specifies the time that the event occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.9.1.7 |
cmTrapTypeLogTextThis object contains any additional information need to describe the
event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.9.1.8 |
cmTrapDestinationTableThis table is used by operators to configure the system to send traps
to a particular management station. In our current implementation,
the system sends all traps to all active (i.e. RowStatus=Active)
receivers. SEQUENCE OF CmTrapDestinationEntry .1.3.6.1.4.1.1996.20.9.10 |
cmTrapDestinationEntryAn entry in the Trap Destination table. CmTrapDestinationEntry .1.3.6.1.4.1.1996.20.9.10.1 |
cmTrapDestinationIpAddrThis is the IP Address that the system will use when sending traps to
this receiver.
This is the first index into this table.ro IpAddress .1.3.6.1.4.1.1996.20.9.10.1.1 |
cmTrapDestinationPortThis is the IP Port that this system will use when sending traps to
this receiver. The standard SNMP Trap port is 162.
This is the second index into this table.ro INTEGER .1.3.6.1.4.1.1996.20.9.10.1.2 |
cmTrapDestinationCommunityThis is the community name to put into trap messages to this trap
receiver.
Default: ''rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.10.1.3 |
cmTrapDestinationRowStatusThis is a field that controls the creation/deletion of entries in
this table. Rows can be created by setting the RowStatus to Active
or NotInService. The resulting entry will retain the entered state.
Rows are deleted by entering a RowStatus of Destroy. The system will
not send traps to a trap receiver whose RowStatus is NotInService.
Default: Activerw Enumeration .1.3.6.1.4.1.1996.20.9.10.1.4 |
cmTrapDestinationOwnerStringThe object specifies additional textual information used to identify
and describe the manager that is to receive traps.
Default: ''rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.9.10.1.5 |
cmLoop OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.10 |
cmLoopIDThis is the unique identifier for the loopback test to be
performed.ro INTEGER .1.3.6.1.4.1.1996.20.10.1 |
cmLoopInterfaceThe value of this object identifies the interface to test. The
interface is identified by the shelf, slot, port and user
channel.rw INTEGER .1.3.6.1.4.1.1996.20.10.2 |
cmLoopTypeThis is the type of loopback test to performed.rw Enumeration .1.3.6.1.4.1.1996.20.10.3 |
cmLoopActionThe action to perform on the loopback test.rw Enumeration .1.3.6.1.4.1.1996.20.10.4 |
cmLoopDurationThe number of seconds to allow the loopback test to run.rw INTEGER .1.3.6.1.4.1.1996.20.10.5 |
cmLoopStatusThe status of the loopback test in progress.ro Enumeration .1.3.6.1.4.1.1996.20.10.6 |
cmLoopTimeElapsedThis is the number of seconds that have elapsed since the loopback
test was started.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.10.7 |
cmLoopTermCodeThis is the test termination code. It specifies why the loopback
test was terminated.ro Enumeration .1.3.6.1.4.1.1996.20.10.8 |
cmLoopTxCountThe number of packets transmitted during the test.ro INTEGER .1.3.6.1.4.1.1996.20.10.9 |
cmLoopRxErrorsThe number of errored packets received during the test.ro INTEGER .1.3.6.1.4.1.1996.20.10.10 |
cmLoopOwnerStringThis string identifies the operator controlling the test.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.10.11 |
cmLoopHistTableThis table is used to store the history records from the previous
loopback tests. A maximum of history 10 records are stored. SEQUENCE OF CmLoopHistEntry .1.3.6.1.4.1.1996.20.10.12 |
cmLoopHistEntryAn entry in the loopback test history table. CmLoopHistEntry .1.3.6.1.4.1.1996.20.10.12.1 |
cmLoopHistIDThis is the unique identifier for the loopback test that was
performed.ro INTEGER .1.3.6.1.4.1.1996.20.10.12.1.1 |
cmLoopHistInterfaceThe value of this object identifies the interface that was tested.
The interface is identified by the shelf, slot, port and user
channel.ro INTEGER .1.3.6.1.4.1.1996.20.10.12.1.2 |
cmLoopHistTypeThis is the type of loopback test that was performed.ro Enumeration .1.3.6.1.4.1.1996.20.10.12.1.3 |
cmLoopHistActionThe last action that was performed on the loopback test.ro Enumeration .1.3.6.1.4.1.1996.20.10.12.1.4 |
cmLoopHistDurationThe number of seconds that the loopback test was allowed to run.ro INTEGER .1.3.6.1.4.1.1996.20.10.12.1.5 |
cmLoopHistStatusThe status of the loopback test.ro Enumeration .1.3.6.1.4.1.1996.20.10.12.1.6 |
cmLoopHistTimeElapsedThis is the number of seconds that elapsed for the duration of the
loopback test.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.10.12.1.7 |
cmLoopHistTermCodeThis is the test termination code. It specifies why the loopback
test was terminated.ro Enumeration .1.3.6.1.4.1.1996.20.10.12.1.8 |
cmLoopHistTxCountThe number of packets transmitted during the test.ro INTEGER .1.3.6.1.4.1.1996.20.10.12.1.9 |
cmLoopHistRxErrorsThe number of errored packets received during the test.ro INTEGER .1.3.6.1.4.1.1996.20.10.12.1.10 |
cmLoopHistOwnerStringThis string identifies the operator that controlled the test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.10.12.1.11 |
cmLoopHistTestParameter1The value of this object is test type dependent. For the
EOC loopback test type, it specifies the address of the
network element to loop back to the system. Valid values
are 0-6. A value of 0 always addresses the NT (CPE) and
values 1-6 indicate the number of hops away from the LT
(Line Card).ro INTEGER .1.3.6.1.4.1.1996.20.10.12.1.12 |
cmLoopHistErrorInfoThe value of this object is card dependent. It is a method
to specify more additional error status to the operator.ro Enumeration .1.3.6.1.4.1.1996.20.10.12.1.13 |
cmLoopTestParameter1The value of this object is test type dependent. For the
EOC loopback test type, it specifies the address of the
network element to loop back to the system. Valid values
are 0-6. A value of 0 always addresses the NT (CPE) and
values 1-6 indicate the number of hops away from the LT
(Line Card).rw INTEGER .1.3.6.1.4.1.1996.20.10.13 |
cmLoopErrorInfoThe value of this object is card dependent. It is a method
to specify more additional error status to the operator.ro Enumeration .1.3.6.1.4.1.1996.20.10.14 |
cmVBridge OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.11 |
cmVBridgeTableThe virtual bridge table. SEQUENCE OF CmVBridgeEntry .1.3.6.1.4.1.1996.20.11.1 |
cmVBridgeEntryAn entry in the cmVBridge table. CmVBridgeEntry .1.3.6.1.4.1.1996.20.11.1.1 |
cmVBridgePIIThe value of this object identifies the network interface
from the shelf, slot, port and user channel. PII stands for
Permanent Interface Identifier.ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.1 |
cmVBridgeNMACThe number of MAC entries in the bridge.ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.2 |
cmVBridgeNMulticastThe number of multicast frames from the MIO or Ethernet.ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.3 |
cmVBridgeNUnicastThe number of unicast frames from the MIO or Ethernet.ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.4 |
cmVBridgeNDSLThe number of frames from DSL.ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.5 |
cmVBridgeNUnknownDestThe number of unnown destinations that have been dropped.ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.6 |
cmVBridgeNOverflowThe number of unlearned MACs (table full).ro INTEGER .1.3.6.1.4.1.1996.20.11.1.1.7 |
cmVBridgeOptionOptional bridge function.rw Enumeration .1.3.6.1.4.1.1996.20.11.1.1.8 |
cmMAC OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.12 |
cmMACTableThis table displays the learned host Ethernet MAC addresses for each
VWAN-bridge group. SEQUENCE OF CmMACEntry .1.3.6.1.4.1.1996.20.12.1 |
cmMACEntryAn entry in the CM MAC table. CmMACEntry .1.3.6.1.4.1.1996.20.12.1.1 |
cmMACPIIVWAN-bridge Group Identifier. This is the PII for the WAN VC
uplink of the Group.ro INTEGER .1.3.6.1.4.1.1996.20.12.1.1.1 |
cmMACIndexArbitrary index within a Bridge Group for this entry in the
MAC table.ro INTEGER .1.3.6.1.4.1.1996.20.12.1.1.2 |
cmMACMACMAC address of this host's Ethernet interface.ro OCTET STRING .1.3.6.1.4.1.1996.20.12.1.1.3 |
cmMACTTLMinutes to live before aging out.ro INTEGER .1.3.6.1.4.1.1996.20.12.1.1.4 |
cmMACDslPIIPII of this host's DSL interface.ro INTEGER .1.3.6.1.4.1.1996.20.12.1.1.5 |
cmAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.13 |
cmAlarmTableA list of alarm entries. SEQUENCE OF CmAlarmEntry .1.3.6.1.4.1.1996.20.13.1 |
cmAlarmEntryA list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8 CmAlarmEntry .1.3.6.1.4.1.1996.20.13.1.1 |
cmAlarmIndexAn index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.ro INTEGER .1.3.6.1.4.1.1996.20.13.1.1.1 |
cmAlarmIntervalThe interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds.ro INTEGER .1.3.6.1.4.1.1996.20.13.1.1.2 |
cmAlarmVariableThe object identifier of the particular variable to
be sampled. Only variables that resolve to an ASN.1
primitive type of INTEGER (INTEGER, Counter, Gauge,
or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely
in terms of the contents of MIB views, no access
control mechanism exists that can restrict the value
of this object to identify only those objects that
exist in a particular MIB view. Because there is
thus no acceptable means of restricting the read
access that could be obtained through the alarm
mechanism, the probe must only grant write access to
this object in those views that have read access to
all objects on the probe.rw OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.13.1.1.3 |
cmAlarmSampleTypeThe method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).ro Enumeration .1.3.6.1.4.1.1996.20.13.1.1.4 |
cmAlarmValueThe value of the statistic during the last sampling
period. This is the value that is compared with the
rising thresholds.
The value during the current sampling period is not
made available until the period is completed and will
remain available until the next period completes.ro INTEGER .1.3.6.1.4.1.1996.20.13.1.1.5 |
cmAlarmStartupAlarmThe alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or risingOrFallingAlarm(3), then a
single rising alarm will be generated. If the first
sample after this entry becomes valid is less than
or equal to the fallingThreshold and
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3), then a single falling alarm
will be generated.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).ro Enumeration .1.3.6.1.4.1.1996.20.13.1.1.6 |
cmAlarmRisingThresholdA threshold for the sampled statistic. When the
current sampled value is greater than or equal to
this threshold, and the value at the last sampling
interval was less than this threshold, a single
event will be generated. A single event will also
be generated if the first sample after this entry
becomes valid is greater than or equal to this
threshold and the associated alarmStartupAlarm is
equal to risingAlarm(1).
Note: a value of 0 turns off the monitoring of this thresholdrw INTEGER .1.3.6.1.4.1.1996.20.13.1.1.7 |
cmAlarmFallingThresholdA threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold, and
the value at the last sampling interval was greater than
this threshold, a single event will be generated. A single
event will also be generated if the first sample after this
entry becomes valid is less than or equal to this threshold
and the associated alarmStartupAlarm is equal to
fallingAlarm(2) or risingOrFallingAlarm(3).
After a falling event is generated, another such event will
not be generated until the sampled value rises above this
threshold and reaches the cmAlarmRisingThreshold.
Default: 0rw INTEGER (-255..255) .1.3.6.1.4.1.1996.20.13.1.1.8 |
cmAlarmStatusThe status of this alarm entry.rw EntryStatus .1.3.6.1.4.1.1996.20.13.1.1.12 |
cmAlarmSwitchThe value of this object indicates whether the monitoring of
threshold crossing alerts is enabled or disabled.rw Enumeration .1.3.6.1.4.1.1996.20.13.2 |
cmAlarmSamplingIntervalThe value of this object specfies the sampling interval, in
minutes, for performance metrics collection in the
cmDslIntervalTable, dsx3IntervalTable, and
dsx3FarEndIntervalTable in the system. The minimum value for
this object is 5 minutes. The recommended values are 5, 15,
and 60 minutes.
The value of this object will affect the amount of data
collected in the cmDsl24HrTable, the dsx3TotalTable, and the
dsx3FarEndTotalTable. If the SamplingInterval is less than 15
minutes, then each of these tables will contain
96*SamplingInterval minutes worth of summed data.
If the SamplingInterval is greater than 15 minutes, these
tables will contain some multiple of SamplingInterval such that
the total is closest to, but not less than, 24 hours. (For
example, with a SamplingInterval of 17 minutes, these tables
will contain 85 intervals = 1445 minutes = 24 hrs and 5 minutes
worth of data.)
Default: 15 minutes.rw INTEGER .1.3.6.1.4.1.1996.20.13.3 |
cmEvent OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.14 |
cmUserGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.15 |
cmNameTableThis is a multi-indexed table that stores the protocol interface name
and corresponding PII for all protocol interfaces in the system.
Typically a network operator will query this table to obtain the
interface name that corresponds to a particular PII. SEQUENCE OF CmNameEntry .1.3.6.1.4.1.1996.20.15.1 |
cmNameEntryAn entry in the cmName table. CmNameEntry .1.3.6.1.4.1.1996.20.15.1.1 |
cmNameIfNameThe value of this object identifies the name of the virtual circuit.
The cmNameIfName is set in the cmSubIfaceTable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.15.1.1.1 |
cmNamePIIThe value of this object identifies the network interface
from the shelf, slot, port and user channel. PII stands for
Permanent Interface Identifier.ro CmObjectPII .1.3.6.1.4.1.1996.20.15.1.1.2 |
cmGroupTableGrouping allows carrier to associate their end user customers with
a particular group. The 'grouping feature' is implemented in the
cmGroupTable and the cmMemberTable. The cmGroupTable allows an
operator to create new groups, delete existing groups and rename
existing groups. SEQUENCE OF CmGroupEntry .1.3.6.1.4.1.1996.20.15.2 |
cmGroupEntryAn entry in the cmGroup table. CmGroupEntry .1.3.6.1.4.1.1996.20.15.2.1 |
cmGroupNameThe value of this object displays the customer assigned name of a
group. Note that the name of a group can be changed using
cmGroupNewGrpNamero DisplayString .1.3.6.1.4.1.1996.20.15.2.1.1 |
cmGroupNewGrpNameThe object is used to rename a user group. The value of this object
is the new user group name. Setting this object will change the name
of the user group in this table as well as all entries with this user
group name in the cmMemberTable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.15.2.1.2 |
cmGroupRowStatusThis object is the rowStatus of the group. A group is enabled
by setting this object to 'active'. An entry in this table is created
by setting this object to 'createAndGo' and is destroyed by
setting this object to 'destroy'. The value 'notReady','createAndGo',
and 'notInService' are not supportedrw Enumeration .1.3.6.1.4.1.1996.20.15.2.1.3 |
cmMemberTableGrouping allows a carrier to associate their end user customers with
a particular group. The 'grouping feature' is implemented in the
cmGroupTable and the cmMemberTable. The cmMemberTable allows an
operator to add a new interface to and delete an existing interfaces
from a group. SEQUENCE OF CmMemberEntry .1.3.6.1.4.1.1996.20.15.3 |
cmMemberEntryAn entry in the cmMemberTable. CmMemberEntry .1.3.6.1.4.1.1996.20.15.3.1 |
cmMemberGrpNameThe value of this object identifies the name of the user group to
which this member belongs. Note that this user group must exist in
the cmGroupTable before an operator can use it in this table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.15.3.1.1 |
cmMemberPIIThe value of this object identifies the network interface
from the shelf, slot, port and user channel. PII stands for
Permanent Interface Identifier .ro CmObjectPII .1.3.6.1.4.1.1996.20.15.3.1.2 |
cmMemberRowStatusThis object is the rowStatus of the member. A member is enabled
by setting this object to 'active'. An entry in this table is created
by setting this object to 'createAndGo' and is destroyed by
setting this object to 'destroy'. The value 'notReady', 'notInService'
and 'createAndGo'are not supported.
Note: when an entry is added to the cmMemberTable the group name
in the corresponding cmIfaceTable entry will be updated.rw Enumeration .1.3.6.1.4.1.1996.20.15.3.1.3 |
cmMaint OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.16 |
cmMaintCmdTableThis table allows the operator to configure the Automatic
and Manual collection of Bulk Statistics and the recurring
Config Backup. There will be one entry in this group for
each type of Maintanence command supported. SEQUENCE OF CmMaintCmdEntry .1.3.6.1.4.1.1996.20.16.1 |
cmMaintCmdEntryA list of parameters that are associated with
a given maintenance command in the system. CmMaintCmdEntry .1.3.6.1.4.1.1996.20.16.1.1 |
cmMaintCmdCommandThis is the command being configured. This is also the
index into the table.ro Enumeration .1.3.6.1.4.1.1996.20.16.1.1.1 |
cmMaintCmdRowStatusThis object is used to add and delete entries from this
table. All values are writable, but only 'active' and
'notInService' are readable. An operator uses 'createAndGo'
or 'createAndWait' to create an instance of the table for
a particular command. If 'createAndGo' is entered, then the
entry will be considered 'active' and the command will begin
executing. If the operator enters 'createAndWait', the entry
will be considered 'notInService' and the command will not
be executed. The operator enters 'destroy' to delete the
instance. If an entry is 'notInService', the operator can
set the RowStatus to 'active' to allow the command to commence.
If an automatic entry is 'active', the operator can enter
'notInService' to pause the command. The operator may abort
a bulkCPEDownload command by setting this object to 'NotInService'.
Default: 'active'rw Enumeration .1.3.6.1.4.1.1996.20.16.1.1.2 |
cmMaintCmdStartTimeThis is the start time that applies to the command. If the
command is 'statsAuto' or 'statsManual' the StartTime reflects
the timestamp of the first data contained in the uploaded file
(rounded up to the nearest interval boundary). For 'statsAuto'
this means the first upload will occur at StartTime + Recurrance.
For 'configBackup', 'configRestore' and 'bulkCPEDownload', the StartTime
is the time the command will first be executed. If the StartTime is in
the past and the recurrence is 0, the command will be executed immediately.
Note: Time values should be in the format: YY/MM/DD-HH:MM:SS.
If the operator enters seconds in this field, they will be
ignored.
Default: None, the operator must configure this field explicitly.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.3 |
cmMaintCmdRecurrenceFor automatic commands (such as 'configBackup' and 'statsAuto'),
this is the number of hours between each execution of the
command.
For the 'configBackup' command, a value of 0 indicates to do
the backup once. The command will be executed at the given
StartTime. If Recurrence is zero and StartTime is zero (or in
the past), the backup will be executed immediately.
For 'statsAuto', the number of hours is limited to 6. This
ensures that the system provides consistent data with no gaps
in the uploaded files regardless of recent changes to the
sampling interval. Also, the ReportingPeriod will be made
to match the Recurrence value.
For 'configRestore', the value of this object is ignored.
For 'bulkCPEDownload', the recurrence must be 0.
Default: 0rw INTEGER .1.3.6.1.4.1.1996.20.16.1.1.4 |
cmMaintCmdReportingPeriodThe ReportingPeriod defines the valid range (number of hours) of
data in the uploaded file.
For the 'configBackup' and bulkCPEDownload' commands, sets to this
value are rejected and the value when read is 0.
For 'statsAuto', operator sets to this object are rejected, and the
value when read is set to the value of the Recurrence object.
For 'statsManual', the operator sets this value to the number of
hours of data that they would like to include in the uploaded file.
The timestamps on the data uploaded will range from StartTime to
StartTime + ReportingPeriod. If the StartTime + ReportingPeriod is
greater than the current time, the system will upload as much data
as it has collected at present.
For 'configRestore', the value of this object is ignored.
Default: 0rw INTEGER .1.3.6.1.4.1.1996.20.16.1.1.5 |
cmMaintCmdPrimaryIpAddrThis is the IpAddress of the primary file server to use in
executing the command. If an address of all 0's is entered,
no save will be attempted to the primary and no event will
be generated.
For 'bulkCPEDownload', the value of this object is ignored.
Default: None, this field must be configured by the operator.rw IpAddress .1.3.6.1.4.1.1996.20.16.1.1.6 |
cmMaintCmdSecondaryIpAddrThis is the IpAddress of the secondary file server to use
in executing the command. If an address of all 0's is
entered, no save will be attempted to the secondary and no
event will be generated. If a transfer to the primary fails
and there is no secondary address configured, the CommandStatus
will be 'failed'.
For 'bulkCPEDownload', the value of this object is ignored.
For 'configRestore', the value of this object is ignored.
Default: 0.0.0.0rw IpAddress .1.3.6.1.4.1.1996.20.16.1.1.7 |
cmMaintCmdDirectoryThis is the directory on the file server where uploaded
files will be stored on both the primary and secondary
file servers.
For 'bulkCPEDownload', the value of this object is ignored.
Default: '' (empty string)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.8 |
cmMaintCmdBaseFileNameThis is the base file name that the system will use when
generating the statistics file for both the 'statsAuto' and
'statsManual' commands. In either case, the system will
append the interval start time to the filename before
transferring the file.
For 'configRestore', this is the name of the saved configuration
file that the system will retrieve from the file server.
For 'bulkCPEDownload', the value of this object is ignored.
Default: '' (empty string)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.9 |
cmMaintCmdUserNameThis is the name that the system will use when initiating an
FTP session with the file server (this applies to both the
primary and secondary file servers).
For 'bulkCPEDownload', the value of this object is ignored.
Default: 'Anonymous'rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.10 |
cmMaintCmdPasswordThis is the password that the system will use when initiating
an FTP session with the file server (this applies to both
the primary and secondary file servers). The operator can
write this value, but when it is read back it displays '****'.
Note: This will need to be stored as a plain text ascii string
so it can be used by the system. The value must start with
an alphanumeric value.
For 'bulkCPEDownload', the value of this object is ignored.
Default: '' (empty string)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.11 |
cmMaintCmdPreviousTimeThis is the calendar time at the beginning of the last attempted
execution. If this operation has not been attempted since
powerup, this field displays an empty string (''). If the
command is 'configBackup', this field is only updated when
the upload is actually attempted (i.e. if the stored configuration
has changed since the last attempt).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.12 |
cmMaintCmdNextTimeThis is the calendar time when this automatic operation will
next be attempted. If this is not an automatic operation,
or this operation is not 'active', this field displays an
empty string ('').ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.16.1.1.13 |
cmMaintCmdCommandStatusThis object indicates the status of the last command.
'none' indicates no command has been executed since startup.
'savedToPrimary' indicates the last upload succeeded to the
primary file server. 'savedToSecondary' indicates that the
last upload succeeded to the secondary file server. 'succeeded'
indicates that the last restore command succeeded. 'failed'
indicates that the last file transfer failed between the system
and the file servers. InProgress indicates the command is currently
running. Aborted applies to the 'bulkCPEDownload' command only.
For 'bulkCPEDownload', the valid CommandStatus are: None, Failed,
InProgress, Succeeded, and Aborted. Failed indicates the software
download failed for one or more candidate CPE. Aborted indicates
the command was aborted before all candidate CPE were downloaded.ro Enumeration .1.3.6.1.4.1.1996.20.16.1.1.14 |
cmMaintCmdStatusTextThe object contains a more detailed status that can be filled
in by the system to provide more information to the operator.
This status may be updated while a command is 'inProgress'.
For 'bulkCPEDownload', this object indicates the number of
successful download, failed download, download in progress, and
download still pending.ro DisplayString .1.3.6.1.4.1.1996.20.16.1.1.15 |
cmMaintStatsDelimiterThis is the delimiter that is added between each column
in the uploaded data file. This is any standard ASCII
character.
Default: '|'rw DisplayString .1.3.6.1.4.1.1996.20.16.2 |
cmProxyArp OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.17 |
cmProxyArpTableThis table provides information about the Proxy Arp status of each
DSL port in the system. SEQUENCE OF CmProxyArpEntry .1.3.6.1.4.1.1996.20.17.1 |
cmProxyArpEntryThe Proxy Arp status associated with a given DSL Port. CmProxyArpEntry .1.3.6.1.4.1.1996.20.17.1.1 |
cmProxyArpPIIThis is the PII of the DSL port. This is also the index into the
table.ro CmObjectPII .1.3.6.1.4.1.1996.20.17.1.1.1 |
cmProxyArpRowStatusThis object is used to activate/deactivate the proxy arp
function for the given DSL port. Proxy Arp is valid only for a
port configured in one of the IP netmodels. An attempt to enable
it for some other netmodel will result in a 'DB_INCONSISTENT_VALUE'
error. If the netmodel for a DSL port with Proxy Arp active is
changed to a netmodel that is incompatible with Proxy ARP, the
associated row will be deleted from the table.rw Enumeration .1.3.6.1.4.1.1996.20.17.1.1.2 |
cmMultiShelf OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.18 |
cmTrunkIfTableThis table contains all the inter-shelf
trunk interfaces. Each inter-shelf trunk
interface is represented by its PII. SEQUENCE OF CmTrunkIfEntry .1.3.6.1.4.1.1996.20.18.1 |
cmTrunkIfEntryEach entry in this table represents an
interface or an end-point of the inter-
shelf trunk. CmTrunkIfEntry .1.3.6.1.4.1.1996.20.18.1.1 |
cmTrunkIfIndexThis value is used to index the table. The
shelf.slot.port portions of the PII are required
to traverse the table. The index will address a
particular ethernet port on a particular SCM in a
particular shelf.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.1.1.1 |
cmTrunkIfOperStateOperational state of this ethernet port.ro Enumeration .1.3.6.1.4.1.1996.20.18.1.1.2 |
cmTrunkIfAdminStateThis allows the operator to enable and disable a
particular ethernet port. The operational state of
the port can be determined by accessing the
cmTrunkIfOperState object.rw Enumeration .1.3.6.1.4.1.1996.20.18.1.1.3 |
cmTrunkIfSentPacketsNumber of transmitted packets from a particular
ethernet port on a SCM.ro Counter .1.3.6.1.4.1.1996.20.18.1.1.4 |
cmTrunkIfSentErrorNumber of errors detected when sending packets from
a particular ethernet port on a SCM.ro Counter .1.3.6.1.4.1.1996.20.18.1.1.5 |
cmTrunkIfRecvPacketsNumber of packets received from a particular ethernet
port on a SCM.ro Counter .1.3.6.1.4.1.1996.20.18.1.1.6 |
cmTrunkIfRecvErrorNumber of errors detected while receiving packets from a
particular ethernet port on a SCM.ro Counter .1.3.6.1.4.1.1996.20.18.1.1.7 |
cmTrunkConnectionTableThis table contains the inter-shelf trunks. Each trunk
connects 2 shelves using their inter-shelf trunk
interface. The trunk provides control and data path
for the shelves. SEQUENCE OF CmTrunkConnectionEntry .1.3.6.1.4.1.1996.20.18.2 |
cmTrunkConnectionEntryEach entry in this table represents a link
used to pass control and data between the
master shelf and the expansion shelf. CmTrunkConnectionEntry .1.3.6.1.4.1.1996.20.18.2.1 |
cmTrunkConnectionTrunkMasterThis value is used as an index into the table.
The shelf.board portions of the PII value are
used to specify a particular SCM who is the master
of the primary or secondary side of the system.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.2.1.1 |
cmTrunkConnectionIndexThis value is the second index to the table.
When used with the master SCM PII index,
cmTrunkConnectionTrunkMaster, it will identify
one of the inter-shelf trunks for that side of
the system. This index itself is arbitrary but
will give the operator the state and PII values
of each end of the connection. Numbering for each
side of the system will begin at 1 and there will be
no gaps.ro INTEGER .1.3.6.1.4.1.1996.20.18.2.1.2 |
cmTrunkConnectionOperStateOperational state of this IST.ro Enumeration .1.3.6.1.4.1.1996.20.18.2.1.3 |
cmTrunkConnectionLowPIILower PII of the two ports connected by this trunk.
The term lower in this context refers to the shelf
value of the PII.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.2.1.4 |
cmTrunkConnectionHighPIIHigher PII of the two ports connected by this trunk.
The term higher in this context refers to the shelf
value of the PII.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.2.1.5 |
cmTrunkTopoTableThis table contains the inter-shelf trunk topology.
Each entry is represented by a source shelf and a
destination shelf. SEQUENCE OF CmTrunkTopoEntry .1.3.6.1.4.1.1996.20.18.3 |
cmTrunkTopoEntryEach entry in this table represents the connection topology
for a possible path from one shelf to another. An entry
will be indexed by a source and destination shelf and
will contain information about the path between those
shelves. If an path exists the entry will contain information
about the next hop on that path including the ethernet port
on the source shelf to follow, the shelf number of the next
hop and the number of hops to complete the path. CmTrunkTopoEntry .1.3.6.1.4.1.1996.20.18.3.1 |
cmTrunkTopoSrcThis value is used as the first index into the table.
The shelf.board portions of the PII value are used to
specify a particular SCM that will be the source of the
connection.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.3.1.1 |
cmTrunkTopoDestThis value is used as the second index into the table.
The shelf.board portions of the PII value are used to
specify a particular SCM that will be the destination of
the connection.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.3.1.2 |
cmTrunkTopoInterfaceEthernet port to be used on source shelf for the first
hop from the source SCM.ro CmObjectPII .1.3.6.1.4.1.1996.20.18.3.1.3 |
cmTrunkTopoNextHopThe next shelf on this path.ro INTEGER .1.3.6.1.4.1.1996.20.18.3.1.4 |
cmTrunkTopoHopsThe number of hops required going from the source SCM
to the destination SCM.ro INTEGER .1.3.6.1.4.1.1996.20.18.3.1.5 |
cmDHCP OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.19 |
cmDHCPTableThis table provides a way for an operator to configure all
of the configuration that will be sent to a CPE when the system
receives a DHCP request from that CPE. SEQUENCE OF CmDHCPEntry .1.3.6.1.4.1.1996.20.19.1 |
cmDHCPEntryThe DHCP configuration information associated with a given
DSL Port. CmDHCPEntry .1.3.6.1.4.1.1996.20.19.1.1 |
cmDHCPPIIThis is the PII of the DSL port. This is also the index into the
table.ro CmObjectPII .1.3.6.1.4.1.1996.20.19.1.1.1 |
cmDHCPRowStatusThis object is used to create and delete entries from this table.
An operator can implicitly create a row in this table by setting
any object in the table or by setting the RowStatus to 'active'.
Operators delete entries from this table by setting the RowStatus
to 'destroy'.rw Enumeration .1.3.6.1.4.1.1996.20.19.1.1.2 |
cmDHCPIpAddressThis is the IpAddress that will be sent to the CPE when a DHCP
request is received over the DSL link.
Default: 0.0.0.0rw IpAddress .1.3.6.1.4.1.1996.20.19.1.1.3 |
cmDHCPNetMaskThis is the NetMask that will be sent to the CPE when a DHCP
request is received over the DSL link.
Default: 0.0.0.0rw IpAddress .1.3.6.1.4.1.1996.20.19.1.1.4 |
cmServiceClass OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.20 |
cmServiceClassAweightThe relative weight of the A Service Class.
The percentage of packets that will come from interfaces assigned
to class A is:
( Aweight / (Aweight+Bweight+Cweight+Dweight) ) * 100
The system will limit the weights in that all values must be
between 1 and 8 and:
Aweight >= Bweight >= Cweight >= Dweight
Default: 4rw INTEGER .1.3.6.1.4.1.1996.20.20.1 |
cmServiceClassBweightThe relative weight of the B Service Class.
The percentage of packets that will come from interfaces assigned
to class B is:
( Bweight / (Aweight+Bweight+Cweight+Dweight) ) * 100
The system will limit the weights in that all values must be
between 1 and 8 and:
Aweight >= Bweight >= Cweight >= Dweight
Default: 3rw INTEGER .1.3.6.1.4.1.1996.20.20.2 |
cmServiceClassCweightThe relative weight of the C Service Class.
The percentage of packets that will come from interfaces assigned
to class C is:
( Cweight / (Aweight+Bweight+Cweight+Dweight) ) * 100
The system will limit the weights in that all values must be
between 1 and 8 and:
Aweight >= Bweight >= Cweight >= Dweight
Default: 2rw INTEGER .1.3.6.1.4.1.1996.20.20.3 |
cmServiceClassDweightThe relative weight of the D Service Class.
The percentage of packets that will come from interfaces assigned
to class D is:
( Dweight / (Aweight+Bweight+Cweight+Dweight) ) * 100
The system will limit the weights in that all values must be
between 1 and 8 and:
Aweight >= Bweight >= Cweight >= Dweight
Default: 1rw INTEGER .1.3.6.1.4.1.1996.20.20.4 |
cmEndPoint OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.21 |
cmEndPointPortTableThis read-only table lists all the DSL ports that belong to
the same CPE. Each CPE or CPE stack is identified with an unique
EndPointID and not all the CPEs support EndPointID.
This table is defined for the operator to determine which DSL
ports are connected the same EndPoint. Each entry in this
table is identified by BasePII of DSL Port and an entry number.
Entry number is assigned arbitrarily internally and provides
a way for the operator to walk through all DSL ports that are
reporting the same EndPointID as the BasePII. SEQUENCE OF CmEndPointPortEntry .1.3.6.1.4.1.1996.20.21.1 |
cmEndPointPortEntryEach entry in the table contains information for a DSL port
that belongs to a specific EndPointID(CPE or CPE stack). This
information includes the EndPointID, the PII of the DSL port,
PII of the IMUX bundle it belongs to and the number of DSL ports
with the same EndPointID. CmEndPointPortEntry .1.3.6.1.4.1.1996.20.21.1.1 |
cmEndPointPortBasePIIThis is the PII of a physical DSL port, to which the operator wants
to find the paired ports.ro CmObjectPII .1.3.6.1.4.1.1996.20.21.1.1.1 |
cmEndPointPortNumberIndicates the Nth DSL port reporting the same EndPointID as the
BasePII.ro INTEGER .1.3.6.1.4.1.1996.20.21.1.1.2 |
cmEndPointPortEndPointIDThis is the EndPointID that is being reported by both the CPE connected
to the BasePII and the CPE connected to the PartnerPII in this instance
of the tablero OCTET STRING .1.3.6.1.4.1.1996.20.21.1.1.3 |
cmEndPointPortPartnerPortPIIThis is the PII of the port connected to the CPE reporting the same
EndPointID as the BasePII.ro CmObjectPII .1.3.6.1.4.1.1996.20.21.1.1.4 |
cmEndPointPortPartnerBundlePIIThe PII of the IMUX bundle the PartnerPortPII belongs to. Otherwise, this
field is all zerosro CmObjectPII .1.3.6.1.4.1.1996.20.21.1.1.5 |
cmEndPointPortNumMatchingEndPointNumber of currently trained DSL ports whose CPE are reporting the same
EndPointID as the BasePII (including BasePII)ro INTEGER .1.3.6.1.4.1.1996.20.21.1.1.6 |
cmEndPointConfigTableThis table contains configuration data stored in the system that is used to
control and monitor a given CPE endpoint. This group is currently used to
configure the CPE bulk download feature only. This table is indexed by the
DSL Port PII. SEQUENCE OF CmEndPointConfigEntry .1.3.6.1.4.1.1996.20.21.2 |
cmEndPointConfigEntryEach entry in the table contains user configurable information for a
DSL port. Currently, each entry has information as to whether the the bulk
download is enabled or disabled by the user and the status of the download
itself. CmEndPointConfigEntry .1.3.6.1.4.1.1996.20.21.2.1 |
cmEndPointConfigPIIThis is the PII of the DSL port to which the configuration is applicable to.ro CmObjectPII .1.3.6.1.4.1.1996.20.21.2.1.1 |
cmEndPointConfigRowStatusThis object is used to create and delete entries from this table.
An operator can implicitly create a row in this table by setting the
BulkDownload object with no RowStatus, or a RowStatus of active.
Operators delete entries from this table by setting the RowStatus
to Destroy.rw Enumeration .1.3.6.1.4.1.1996.20.21.2.1.2 |
cmEndPointConfigBulkDownloadThis object indicates whether the operator wants this CPE to be
downloaded to the software version in the CE's code directory when
a bulkCPEDownload command is issued by the operator.
When the bulkCPEDownload command is issued, if this object is set
to Enabled, and the CPE is online, the system will compare the CPE SW
version with the SCM SW version. If the CPE SW version is different,
the system will initiate the download process with the CPE. If the CPE is
not online, then the system will check at the next time the CPE becomes
online.rw Enumeration .1.3.6.1.4.1.1996.20.21.2.1.3 |
cmEndPointConfigDownloadStatusThis object shows the status of a bulkCPEDownload command relative
to this specific CPE. None indicates that no bulkCPEDownload command
has been executed since power up. Pending indicates a bulkCPEDownload
command has been issued, this CPE is eligible but the download has not
started. InProgress indicates the download process has started on this
CPE. Failed indicates that an download was attempted to this CPE, but
it has failed. Completed indicates an download was attempted and
succeeded to this CPE. NotDownloadable indicates that the CPE does not
support software download.ro Enumeration .1.3.6.1.4.1.1996.20.21.2.1.4 |
cmEndPointConfigDownloadStartTimeThis is the time the download command is sent to the CPE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.21.2.1.5 |
cmEndPointConfigDownloadEndTimeThis is the time when a successful or failed download was detected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.21.2.1.6 |
cmOperator OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.22 |
cmActiveSessionTableThis is a table group with one record per active operator session. This
table is indexed with database session ID. SEQUENCE OF CmActiveSessionEntry .1.3.6.1.4.1.1996.20.22.1 |
cmActiveSessionEntryEach entry in the table contains information for an operator login session.
This table is indexed with database session ID. CmActiveSessionEntry .1.3.6.1.4.1.1996.20.22.1.1 |
cmActiveSessionSessionIDThe database session ID for this operator session.ro Counter .1.3.6.1.4.1.1996.20.22.1.1.1 |
cmActiveSessionOperatorNameThe operator name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.22.1.1.2 |
cmActiveSessionContextThe context through which the operator is logged in.ro Enumeration .1.3.6.1.4.1.1996.20.22.1.1.3 |
cmActiveSessionPrivilegeThe context through which the operator is logged in.ro Enumeration .1.3.6.1.4.1.1996.20.22.1.1.4 |
cmActiveSessionIpAddressThe IP Address through which the operator is logged in, if the operator
is logged in through Telnet or SNMP. If an operator is logged in through
the Craft interface, this field will be all zeros.ro IpAddress .1.3.6.1.4.1.1996.20.22.1.1.5 |
cmActiveSessionStartTimeThe system time when the session was started.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1996.20.22.1.1.6 |
cmActiveSessionIdleTimeoutThe idle timeout in seconds when the active session will auto-logout.ro INTEGER .1.3.6.1.4.1.1996.20.22.1.1.7 |
cmRadius OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.23 |
cmRadiusAuthenticationThe value of this object indicates if the RADIUS option is
enabled or disabled.ro Enumeration .1.3.6.1.4.1.1996.20.23.1 |
cmRadiusAuthKeyThe value of this object is the RADIUS Protocol Authenticator,
a shared secret between the server and client.ro DisplayString .1.3.6.1.4.1.1996.20.23.2 |
cmRadiusAuthPrimaryIpAddrThe value of this object is the Primary IP address of the
RADIUS-Authenticating server.ro IpAddress .1.3.6.1.4.1.1996.20.23.3 |
cmRadiusAuthPrimaryPortThe value of this object is the RADIUS-Authenticating Primary
Server's port number that the system binds to.
Default: 1645ro INTEGER .1.3.6.1.4.1.1996.20.23.4 |
cmRadiusAuthSecondaryIpAddrThe value of this object is the Secondary IP address of the
RADIUS-Authenticating server.ro IpAddress .1.3.6.1.4.1.1996.20.23.5 |
cmRadiusAuthSecondaryPortThe value of this object is the RADIUS-Authenticating Secondary
Server's port number that the system binds to.
Default: 1645ro INTEGER .1.3.6.1.4.1.1996.20.23.6 |
cmRadiusAuthTertiaryIpAddrThe value of this object is the Tertiary IP address of the
RADIUS-Authenticating server.ro IpAddress .1.3.6.1.4.1.1996.20.23.7 |
cmRadiusAuthTertiaryPortThe value of this object is the RADIUS-Authenticating Tertiary
Server's port number that the system binds to.
Default: 1645ro INTEGER .1.3.6.1.4.1.1996.20.23.8 |
cmRadiusAcctPrimaryIpAddrThe value of this object is the Primary IP address of the
RADIUS-Accounting server.ro IpAddress .1.3.6.1.4.1.1996.20.23.9 |
cmRadiusAcctPrimaryPortThe value of this object is the RADIUS-Accounting Primary
Server's port number that the system binds to.
Default: 1646ro INTEGER .1.3.6.1.4.1.1996.20.23.10 |
cmRadiusAcctSecondaryIpAddrThe value of this object is the Secondary IP address of the
RADIUS-Accounting server.ro IpAddress .1.3.6.1.4.1.1996.20.23.11 |
cmRadiusAcctSecondaryPortThe value of this object is the RADIUS-Accounting Secondary
Server's port number that the system binds to.
Default: 1646ro INTEGER .1.3.6.1.4.1.1996.20.23.12 |
cmRadiusAcctTertiaryIpAddrThe value of this object is the Tertiary IP address of the
RADIUS-Accounting server.ro IpAddress .1.3.6.1.4.1.1996.20.23.13 |
cmRadiusAcctTertiaryPortThe value of this object is the RADIUS-Accounting Tertiary
Server's port number that the system binds to.
Default: 1646ro INTEGER .1.3.6.1.4.1.1996.20.23.14 |
cmSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.1996.20.24 |
cmSNMPResponseStringCopper Mountain proprietary object used for internal processing.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1996.20.24.1 |