COMPUTERM-COMMON-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
134
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
134 total| Object Name |
|---|
computerm OBJECT IDENTIFIER .1.3.6.1.4.1.2439 |
IMPORTS Unknown .1.3.6.1.4.1.2439 |
ctChannelExtensionMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1 |
ctSystem OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.1 |
ctSysNameSystem Name.rw DisplayString .1.3.6.1.4.1.2439.1.1.1 |
ctSysTypeSystem Type ie. VMC8250, Other etc.,ro DisplayString .1.3.6.1.4.1.2439.1.1.2 |
ctSysPrimaryBackupModePrimary/Backup Mode of the Channel Extender. This is
defined in PARAMTAB.DATro Enumeration .1.3.6.1.4.1.2439.1.1.3 |
ctSysAutoStartFlagState of the auto start flag.
Set to 1, enable or online to turn channel extender ONLINE
or to 0 disable or offline to turn channel extender OFFLINE
Note! Turning OFFLINE will automatically restart the
the channel extender with a RESTARTEXEC request.rw Enumeration .1.3.6.1.4.1.2439.1.1.4 |
ctSysPowerSupplyMonitorFlagWhether EXEC is monitoring the power supply or notro Enumeration .1.3.6.1.4.1.2439.1.1.5 |
ctSysChannelExtenderModeState of the EXEC i.e. whether it is in diagnostics
mode or channel extender modero DisplayString .1.3.6.1.4.1.2439.1.1.6 |
ctSysElapsedTimeFor how long the system has been running expressed in
days, hours, minutes.ro DisplayString .1.3.6.1.4.1.2439.1.1.7 |
ctSysStartupTimeThe last time EXEC was restarted expressed in Month,
Day, Year, Hour, Minute format in the local time
zone.ro DisplayString .1.3.6.1.4.1.2439.1.1.8 |
ctSysCurrentTimeCurrent Time expressed in Month,Day,Year,Hour,Minute
format in the local time zone.ro DisplayString .1.3.6.1.4.1.2439.1.1.9 |
ctSysCustomerNameTextual Identification of the name of the customerro DisplayString .1.3.6.1.4.1.2439.1.1.10 |
ctSysCustomerServiceNumberA six(6) digit identification codero DisplayString .1.3.6.1.4.1.2439.1.1.11 |
ctSysComputermContactThe textual identification of the contact person at
Computerm, together with information on how to
contact this person.ro DisplayString .1.3.6.1.4.1.2439.1.1.12 |
ctSysGMXCommandIssue select GMX command via SNMP.
Supported Commands:
SWC, <channel_number_and_address>, <network_address>, <num_contiguous>
channel_number_and_address-Hexadecimal-Mandotory
network_address-Hexadecimal-Mandatory
num_contiguous-Decimal-Optionalrw DisplayString .1.3.6.1.4.1.2439.1.1.13 |
ctInventory OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.2 |
ctHwTableChannel Extender Hardware Inventory Table SEQUENCE OF CtHwEntry .1.3.6.1.4.1.2439.1.2.1 |
ctHwEntryInformation about each hardware module installed CtHwEntry .1.3.6.1.4.1.2439.1.2.1.1 |
ctHwSlotIndexSlot Index of the hardware board. For system level
modules, a specific slot number will be reserved.
See the top of this document for details.ro INTEGER .1.3.6.1.4.1.2439.1.2.1.1.1 |
ctHwBoardIndexThe board index for a specific slot e.g. ARTIC card
and AIB daughter cards. This can also be used to
include the extenally connected modules e.g. OC3/DS3
converter, Control Unit etc.,ro INTEGER .1.3.6.1.4.1.2439.1.2.1.1.2 |
ctHwPortIndexPort Number of the board. This can be potentially
used for MUX cards and Peripheral devices.ro INTEGER .1.3.6.1.4.1.2439.1.2.1.1.3 |
ctHwDeviceIndexExternally connected devices index. This can be
potentially used for peripheral devices and OC3/DS3
convertersro INTEGER .1.3.6.1.4.1.2439.1.2.1.1.4 |
ctHwNameName of the hardware modulerw DisplayString .1.3.6.1.4.1.2439.1.2.1.1.5 |
ctHwTypeType of the hardware modulero DisplayString .1.3.6.1.4.1.2439.1.2.1.1.6 |
ctHwSpeedSpeed of the hardware module. This is the baud rate
for comm. modulesro INTEGER .1.3.6.1.4.1.2439.1.2.1.1.7 |
ctHwChannelOrLineNumberChannel Number of the Adapter/Emulator boards and
Line Number of the Comm boards. For other board
types, this value will be zero.ro INTEGER .1.3.6.1.4.1.2439.1.2.1.1.8 |
ctHwPromNumberPROM Number of the modulero DisplayString .1.3.6.1.4.1.2439.1.2.1.1.9 |
ctHwMNumberM-Number of the modulero DisplayString .1.3.6.1.4.1.2439.1.2.1.1.10 |
ctHwSerialNumberSerial Number of the modulero DisplayString .1.3.6.1.4.1.2439.1.2.1.1.11 |
ctHwRevisionLevelRevision level of the hardware modulero DisplayString .1.3.6.1.4.1.2439.1.2.1.1.12 |
ctHwStatusStatus of the hardware modulero DisplayString .1.3.6.1.4.1.2439.1.2.1.1.13 |
ctSwTableChannel Extender Software Inventory Table SEQUENCE OF CtSwEntry .1.3.6.1.4.1.2439.1.2.2 |
ctSwEntryInformation about each software module running. CtSwEntry .1.3.6.1.4.1.2439.1.2.2.1 |
ctSwSlotIndexSlot Index of the hardware module where this
software module is running. For system level
modules, a specific slot number will be reserved.
See the top of this document for details.ro INTEGER .1.3.6.1.4.1.2439.1.2.2.1.1 |
ctSwBoardIndexThe board index for a specific slot e.g. ARTIC card
and AIB daughter cards where this software module is
running. This can also be used to include the
extenally connected modules e.g. OC3/DS3 converter,
Control Unit etc.,ro INTEGER .1.3.6.1.4.1.2439.1.2.2.1.2 |
ctSwPortIndexPort Number of the board this software module is
running. This can be potentially used for MUX cardsro INTEGER .1.3.6.1.4.1.2439.1.2.2.1.3 |
ctSwDeviceIndexExternally connected devices index. This can be
potentially used for peripheral devices and OC3/DS3
convertersro INTEGER .1.3.6.1.4.1.2439.1.2.2.1.4 |
ctSwNameName of this software modulero DisplayString .1.3.6.1.4.1.2439.1.2.2.1.5 |
ctSwPartNumberSoftware Driver Part Numberro DisplayString .1.3.6.1.4.1.2439.1.2.2.1.6 |
ctTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.3 |
ctTopologyTableProvides the connectivity information between the
current channel extender and all the remote units
including their twin units. SEQUENCE OF CtTopologyEntry .1.3.6.1.4.1.2439.1.3.1 |
ctTopologyEntryDefines each remote connection CtTopologyEntry .1.3.6.1.4.1.2439.1.3.1.1 |
ctTopoSlotIndexSlot Index of the hardware module this connection
is describing. To describe the current unit's
twin unit, a specific slot number will be
reserved. See the top of this document for details.ro INTEGER .1.3.6.1.4.1.2439.1.3.1.1.1 |
ctTopoBoardIndexThe board index of the slot this connection is
describing.ro INTEGER .1.3.6.1.4.1.2439.1.3.1.1.2 |
ctTopoPortIndexThe port index of the slot this connection is
describing.ro INTEGER .1.3.6.1.4.1.2439.1.3.1.1.3 |
ctTopoDeviceIndexExternally connected devices index. This can be
potentially used for peripheral devices and OC3/DS3
convertersro INTEGER .1.3.6.1.4.1.2439.1.3.1.1.4 |
ctTopoNameTextual description of this connection. Same as
ctHwName.rw DisplayString .1.3.6.1.4.1.2439.1.3.1.1.5 |
ctTopoRemoteUnitAddress of the remote channel extender unit.rw IpAddress .1.3.6.1.4.1.2439.1.3.1.1.6 |
ctTopoRemoteTwinUnitAddress of the remote twin channel extender.rw IpAddress .1.3.6.1.4.1.2439.1.3.1.1.7 |
ctPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.4 |
ctPerfResetAllCompressionRatiosThis variable is used to reset the compression
ratios for all different device typesrw Enumeration .1.3.6.1.4.1.2439.1.4.1 |
ctPerfResetAllPeakThroughputsUse this object to reset the peak throughput
values (Tx, Rx and Total) associated with
this conceptual row. This will start a new
data collection and new peak values will be
computed. Modifying this object will also reset
the ctPerfPeakThroughputStartTime to the
current system timerw Enumeration .1.3.6.1.4.1.2439.1.4.2 |
ctPerfResetAllReceiveErrorCountsUse this object to reset the receive error
values associated with all the comm. lines.
This will start a new data collection. Modifying
this object will also reset the
ctPerfReceiveErrorCountStartTime to the
current system timerw Enumeration .1.3.6.1.4.1.2439.1.4.3 |
ctPerfShowFractionsUse this object to display the CPU/Line Utilization
and CompressionRatio in 1/100th of a percentage.
Example: CompressionRatio: 1.59
Please note that 1.59 cannot be reported to the NMS
since SNMP doesn't support Floating Point Arithmetic.
The following are the alternatives::
ctPerfShowFractions=Off:
Agent Reports 2 (1.59 rounded up) as the
CompRatio to the NMS
ctPerfShowFractions=On:
Agent Reports 159 (1/100th of a percentage) as the
CompRatio to the NMS. This will give better
precision.
If the NMS has the capability to devide by 100,
using this method, the actual CompRatio of 1.59
can be displayed by the NMS.
By Default, ctPerfShowFractions is OFFrw Enumeration .1.3.6.1.4.1.2439.1.4.4 |
ctPerfControlTableProvides the user modifiable values for performance
data SEQUENCE OF CtPerfControlEntry .1.3.6.1.4.1.2439.1.4.5 |
ctPerfControlEntryProvides the objects to configure performance data
collection CtPerfControlEntry .1.3.6.1.4.1.2439.1.4.5.1 |
ctPerfControlSlotIndexSlot indexro INTEGER .1.3.6.1.4.1.2439.1.4.5.1.1 |
ctPerfControlBoardIndexBoard Indexro INTEGER .1.3.6.1.4.1.2439.1.4.5.1.2 |
ctPerfControlPortIndexPort Indexro INTEGER .1.3.6.1.4.1.2439.1.4.5.1.3 |
ctPerfControlDeviceIndexExternally connected devices index. This can be
potentially used for peripheral devices and OC3/DS3
convertersro INTEGER .1.3.6.1.4.1.2439.1.4.5.1.4 |
ctPerfControlNameSame as the ctHwNamerw DisplayString .1.3.6.1.4.1.2439.1.4.5.1.5 |
ctPerfControlIntervalData collection interval specified in secondsrw INTEGER .1.3.6.1.4.1.2439.1.4.5.1.6 |
ctPerfControlUtilThresholdUtilization threshold valuerw INTEGER .1.3.6.1.4.1.2439.1.4.5.1.7 |
ctPerformanceTablePerformance data for the channel extender units SEQUENCE OF CtPerformanceEntry .1.3.6.1.4.1.2439.1.4.6 |
ctPerformanceEntryProvides the performance data for different
hardware modules of a Channel Extender CtPerformanceEntry .1.3.6.1.4.1.2439.1.4.6.1 |
ctPerfSlotIndexSlot index of the collectionro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.1 |
ctPerfBoardIndexBoard index for a specific slotro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.2 |
ctPerfPortIndexPort index of a boardro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.3 |
ctPerfDeviceIndexExternally connected devices index. This can be
potentially used for peripheral devices and OC3/DS3
convertersro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.4 |
ctPerfNameSame as the ctHwNamerw DisplayString .1.3.6.1.4.1.2439.1.4.6.1.5 |
ctPerfChannelOrLineNumberSame as the ctHwChannelOrLineNumberro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.6 |
ctPerfTypeSame as the ctHwTypero DisplayString .1.3.6.1.4.1.2439.1.4.6.1.7 |
ctPerfStatusSame as the ctHwStatusro DisplayString .1.3.6.1.4.1.2439.1.4.6.1.8 |
ctPerfTxThroughputTransmit thorughput specified in bits/second
(including any overhead bits). This value is
defined for communication adapters only and
calculated for each pyhsical line. If a
physical line is using multiple virtual lines,
this value accounts for all the virtual linesro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.9 |
ctPerfRxThroughputReceive thorughput specified in bits/second
(including any overhead bits). This value is
defined for communication adapters only and
calculated for each pyhsical line. If a
physical line is using multiple virtual lines,
this value accounts for all the virtual linesro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.10 |
ctPerfTotalThroughputTotal thorughput specified in uncompressed
bytes/second. This value is defined for
adapters, emulators, compression boards,
and for each device assigned to a particular
adapter or emulatorro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.11 |
ctPerfPeakTxThroughputPeak Transmit thorughput specified in
bits/second (including any overhead bits).
This value is defined for communication
adapters only and calculated for each pyhsical
line. If a physical line is using multiple
virtual lines, this value accounts for all the
virtual lines.
ctPerfPeakThroughputStartTime and
ctPerfPeakTxThrouthputTime identify
start time of the data sampling and the actual
the time when the peak value was noted.
User can reset the current peak value and start
new data collection by using the
ctPerfResetPeakThroughput mib objectro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.12 |
ctPerfPeakTxThroughputTimeTime stamp when the peak transmit
throuput value was noted. Time is specified
in the local time zonero DisplayString .1.3.6.1.4.1.2439.1.4.6.1.13 |
ctPerfPeakRxThroughputPeak receive thorughput specified in
bits/second (including any overhead bits).
This value is defined for communication
adapters only and calculated for each pyhsical
line. If a physical line is using multiple
virtual lines, this value accounts for all the
virtual lines.
ctPerfPeakThroughputStartTime and
ctPerfPeakRxThrouthputTime identify
start time of the data sampling and the actual
the time when the peak value was noted.
User can reset the current peak value and start
new data collection by using the
ctPerfResetPeakThroughput mib objectro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.14 |
ctPerfPeakRxThroughputTimeTime stamp when the peak receive
throuput value was noted. Time is specified
in the local time zonero DisplayString .1.3.6.1.4.1.2439.1.4.6.1.15 |
ctPerfPeakTotalThroughputPeak total thorughput specified in
uncompressed bytes/second.
This value is defined for adapters, emulators,
compression board and for all the devices
assigned to each adaptor or emulator.
ctPerfPeakThroughputStartTime and
ctPerfPeakTotalThrouthputTime identify
start time of the data sampling and the actual
the time when the peak value was noted.
User can reset the current peak value and start
new data collection by using the
ctPerfResetPeakThroughput mib objectro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.16 |
ctPerfPeakTotalThroughputTimeTime stamp when the peak total
throughput value was noted. Time is specified
in the local time zone.ro DisplayString .1.3.6.1.4.1.2439.1.4.6.1.17 |
ctPerfPeakThroughputStartTimeTime stamp when the data sampling was started
for determining peak values. Time is specified
in the local time zone.
Whenever user resets the peak values by setting
the ctPerfResetPeakThroughput, this
object will be updated with the current system
timero DisplayString .1.3.6.1.4.1.2439.1.4.6.1.18 |
ctPerfResetPeakThroughputUse this object to reset the peak throughput
values (Tx, Rx and Total) associated with
this conceptual row. This will start a new
data collection and new peak values will be
computed. Modifying this object will also reset
the ctPerfPeakThroughputStartTime to the
current system timerw Enumeration .1.3.6.1.4.1.2439.1.4.6.1.19 |
ctPerfTxUtilizationThis value is defined only for the
communication adapters and computed for each
physical line. This value is expressed as the
transmit bits/second as a percentage of the line
data rate. This value can be between 0 and 100
inclusivero INTEGER .1.3.6.1.4.1.2439.1.4.6.1.20 |
ctPerfRxUtilizationThis value is defined only for the
communication adapters and computed for each
physical line. This value is expressed as the
receive bits/second as a percentage of the line
data rate. This value can be between 0 and 100
inclusivero INTEGER .1.3.6.1.4.1.2439.1.4.6.1.21 |
ctPerfCPUUtilizationThis value is defined only for adapters,
emulators, compression board and
mother board.
This value represents the extent the CPU
on the specified board is busy servicing
all of the hardware and software components
installed in the system.
This value can be between 0 and 100
inclusivero INTEGER .1.3.6.1.4.1.2439.1.4.6.1.22 |
ctPerfDataRateThe data rate associated with the communication
line and is expressed in bits/second.
For SDLC lines, although both Tx and Rx data
rates are available, only Tx clock will be used
to represent the data rate.
For ATM and LAN cards, the data rate values
specified in the PARAMTAB.DAT will be providedro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.23 |
ctPerfReceiveErrorCountThis value is defined only for communication
adapters and shown as the number of errors
received over the sampling interval(default
=60 secs). Ideally this value will be
calculated using a rolling 60 second window
to allow errors to be displayed as they occurro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.24 |
ctPerfReceiveErrorCountStartTimeThis is the system time when the last reset
Receive Errors command was receivedro DisplayString .1.3.6.1.4.1.2439.1.4.6.1.25 |
ctPerfResetReceiveErrorCountThis variable is used to reset the Receive
Erors associated with this conceptual row.
Resetting will start a new data collection.
This will also set the
ctPerfReceiveErrorCountStartTime to current
time.rw Enumeration .1.3.6.1.4.1.2439.1.4.6.1.26 |
ctPerfCommLineDelayCommunication line delay expressed in milli
seconds. Valid only for Comm. adaptersro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.27 |
ctPerfCompressionRatioCompression ratio is defined for the
compression board, for each channel adapter,
and emulator and for each device assigned to
the adapter and emulator.
This is a cumulative value calculated from the
time when the customer sends a reset
compression ratio using the ctPerfResetCompre
-ssionRatio object.ro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.28 |
ctPerfCompressionRatioStartTimeThis is the system time when the last reset
compression ration command was receivedro DisplayString .1.3.6.1.4.1.2439.1.4.6.1.29 |
ctPerfResetCompressionRatioThis variable is used to reset the compression
ratio associated with this conceptual rowrw Enumeration .1.3.6.1.4.1.2439.1.4.6.1.30 |
ctPerfDeviceTxUncompressedCountsThis is the transmit uncompressed byte count for a device
Note: When ctPerfShowFractions is OFF this value is
expressed in kilobytesro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.31 |
ctPerfDeviceTxCompressedCountsThis is the transmit compressed byte count for a device
Note: When ctPerfShowFractions is OFF this value is
expressed in kilobytesro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.32 |
ctPerfDeviceRxUncompressedCountsThis is the receive uncompressed byte count for a device
Note: When ctPerfShowFractions is OFF this value is
expressed in kilobytesro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.33 |
ctPerfDeviceRxCompressedCountsThis is the receive compressed byte count for a device
Note: When ctPerfShowFractions is OFF this value is
expressed in kilobytesro INTEGER .1.3.6.1.4.1.2439.1.4.6.1.34 |
ctPerfDeviceCountsStartTimeThis is the system time when the last reset
device counts command was receivedro DisplayString .1.3.6.1.4.1.2439.1.4.6.1.35 |
ctPerfResetDeviceCountsThis variable is used to reset the transmit, receive,
compressed and uncompressed counts for a devicerw Enumeration .1.3.6.1.4.1.2439.1.4.6.1.36 |
ctPerfTxDeviceCompressionRatioThis is the transmit compression ratio for a devicero INTEGER .1.3.6.1.4.1.2439.1.4.6.1.37 |
ctPerfRxDeviceCompressionRatioThis is the receive compression ratio for a devicero INTEGER .1.3.6.1.4.1.2439.1.4.6.1.38 |
ctPerfResetAllDeviceCountsThis variable is used to reset the transmit, receive,
compressed and uncompressed byte counts of all devices
back to zerorw Enumeration .1.3.6.1.4.1.2439.1.4.7 |
ctDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.5 |
ctDiagnosticsTableDiagnostics information for the Channel Extenders SEQUENCE OF CtDiagnosticsEntry .1.3.6.1.4.1.2439.1.5.1 |
ctDiagnosticsEntryDiagnostics information for each hardware module
of the Channel Extender. CtDiagnosticsEntry .1.3.6.1.4.1.2439.1.5.1.1 |
ctDiagSlotIndexSlot index of the hardware module where the
diagnostics test is being performedro INTEGER .1.3.6.1.4.1.2439.1.5.1.1.1 |
ctDiagBoardIndexBoard index of the slot where the diagnostics
test is being performed.ro INTEGER .1.3.6.1.4.1.2439.1.5.1.1.2 |
ctDiagPortIndexPort index of the board where the diagnostics test
is being performed.ro INTEGER .1.3.6.1.4.1.2439.1.5.1.1.3 |
ctPerfDeviceIndex2Externally connected devices index. This can be
potentially used for peripheral devices and OC3/DS3
convertersro INTEGER .1.3.6.1.4.1.2439.1.5.1.1.4 |
ctDiagNameSame as the ctHwName objectrw DisplayString .1.3.6.1.4.1.2439.1.5.1.1.5 |
ctDiagTypeSame as the ctHwTypero DisplayString .1.3.6.1.4.1.2439.1.5.1.1.6 |
ctDiagTestNumberCurrent Test Numberro DisplayString .1.3.6.1.4.1.2439.1.5.1.1.7 |
ctDiagPassCountro DisplayString .1.3.6.1.4.1.2439.1.5.1.1.8 |
ctDiagStatusSame as the ctHwStatusro DisplayString .1.3.6.1.4.1.2439.1.5.1.1.9 |
ctPowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.6 |
ctPsA-Statusro Enumeration .1.3.6.1.4.1.2439.1.6.1 |
ctPsB-Statusro Enumeration .1.3.6.1.4.1.2439.1.6.2 |
ctPsAlertFlagro INTEGER .1.3.6.1.4.1.2439.1.6.3 |
ctPsFirstFailTimero DisplayString .1.3.6.1.4.1.2439.1.6.4 |
ctPsA-ACErrorsro Counter .1.3.6.1.4.1.2439.1.6.5 |
ctPsA-DCErrorsro Counter .1.3.6.1.4.1.2439.1.6.6 |
ctPsB-ACErrorsro Counter .1.3.6.1.4.1.2439.1.6.7 |
ctPsB-DCErrorsro Counter .1.3.6.1.4.1.2439.1.6.8 |
ctTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2439.1.7 |
ctAbortTableChannel Extender Aborts History Table SEQUENCE OF CtAbortEntry .1.3.6.1.4.1.2439.1.7.1 |
ctAbortEntryChannel Extender Aborts History Table Entry CtAbortEntry .1.3.6.1.4.1.2439.1.7.1.1 |
ctAbortIndexThis index uniquely identifies an entry in the
Abort Table. Although the maximum number of entries
in the table is limited to some pre-determined value
(20 in phase I), ctAbortIndex can assume values in
the 1..65535 rangero INTEGER .1.3.6.1.4.1.2439.1.7.1.1.1 |
ctAbortAlertTimeStampTrap occurence time expressed in local time zonero DisplayString .1.3.6.1.4.1.2439.1.7.1.1.2 |
ctAbortAlertShortDescriptionShort Description of the abort or alert being describedro DisplayString .1.3.6.1.4.1.2439.1.7.1.1.3 |
ctAbortAlertDescriptionFull description of the abort or alert being describedro DisplayString .1.3.6.1.4.1.2439.1.7.1.1.4 |