COMPEX-IN3000
Detailed view of the defined objects, syntax rules, and hierarchical paths.
268
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
268 total| Object Name |
|---|
compex OBJECT IDENTIFIER .1.3.6.1.4.1.426 |
in3000 OBJECT IDENTIFIER .1.3.6.1.4.1.426.1 |
partStateThis trap is sent whenever the partition state changes to partitioned. NOTIFICATION-TYPE .1.3.6.1.4.1.426.1.0.1 |
notPartStateThis trap is sent whenever the partition state changes to not partitioned. NOTIFICATION-TYPE .1.3.6.1.4.1.426.1.0.2 |
hubTypes OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.1 |
tp3000 OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.1.1 |
rp3000 OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.1.2 |
productInfo OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.2 |
productNameThe textual description of the IN3000.ro DisplayString .1.3.6.1.4.1.426.1.2.1 |
productVersionThe version of the IN3000 Firmware.ro DisplayString .1.3.6.1.4.1.426.1.2.2 |
releasedDateThe release date of this version.ro DisplayString .1.3.6.1.4.1.426.1.2.3 |
compexAddressAddress of Compex, Inc.ro DisplayString .1.3.6.1.4.1.426.1.2.4 |
compexPhoneCompex's phone number for technical support or sales information.ro DisplayString .1.3.6.1.4.1.426.1.2.5 |
compexImageInformation on the system setup. This string is not in a human readable form.ro OCTET STRING .1.3.6.1.4.1.426.1.2.6 |
compexMyAccessThis tells you the access you have with the community string you are using.ro Enumeration .1.3.6.1.4.1.426.1.2.7 |
devTeamTableThis is a list of the Compex development team. SEQUENCE OF DevTeamEntry .1.3.6.1.4.1.426.1.2.8 |
devTeamEntryInformation about a particular person. The index is the cpId of the person. DevTeamEntry .1.3.6.1.4.1.426.1.2.8.1 |
cpIdThis is the development team member's unique identifier number.ro INTEGER .1.3.6.1.4.1.426.1.2.8.1.1 |
cpNameThis is the development team member's name.ro DisplayString .1.3.6.1.4.1.426.1.2.8.1.2 |
communityInfo OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.3 |
communityTableA table containing community string information. SEQUENCE OF CommunityEntry .1.3.6.1.4.1.426.1.3.1 |
communityEntryInformation about a particular community string. The instance of the table entries is the communityInstance. CommunityEntry .1.3.6.1.4.1.426.1.3.1.1 |
communityInstanceThe table instance. This is the row number of a particular community string in the table.ro INTEGER .1.3.6.1.4.1.426.1.3.1.1.1 |
communityStringThe community string. This is defined in RFC 1157. The community string may be up to 10 characters in length.rw DisplayString .1.3.6.1.4.1.426.1.3.1.1.2 |
communityCapabilityThe capability of the community string. The community string may be valid for different SNMP operations. Setting this object to 'clear' will cause the entry to be cleared out.rw Enumeration .1.3.6.1.4.1.426.1.3.1.1.3 |
trapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.4 |
trapTableA table containing trap receiver information. SEQUENCE OF TrapEntry .1.3.6.1.4.1.426.1.4.1 |
trapEntryInformation about a particular trap receiver. The instance for this table is the trapDest, or the IP address of the trap receiver. This table may have up to ten entries. TrapEntry .1.3.6.1.4.1.426.1.4.1.1 |
trapDestThe trap destination. This is defined in RFC 1157. The trap received should be the IP address of an SNMP based network management system.rw IpAddress .1.3.6.1.4.1.426.1.4.1.1.1 |
trapStatusThe trap status. This MIB variable is used to delete a trap receiver from the trap table.rw Enumeration .1.3.6.1.4.1.426.1.4.1.1.2 |
in3000StatsRptr OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.5 |
rptrFifoCollsThe total number of Collision Designators put into the IN3000's FIFO.ro Counter .1.3.6.1.4.1.426.1.5.1 |
rptrShortWoPortThe total number of short fragment put into the IN3000's FIFO without a port designator.ro Counter .1.3.6.1.4.1.426.1.5.2 |
rptrNoStatsDsgntrThe total number of empty statistic designators put into the IN3000's FIFO.ro Counter .1.3.6.1.4.1.426.1.5.3 |
rptrInvalidDesgntrThe total number of entries put into the IN3000's FIFO that had invalid designators.ro Counter .1.3.6.1.4.1.426.1.5.4 |
rptrPortIDwoPacketThe total number of entries in the IN3000's FIFO which do not have a corresponding packet in the ethernet controller's RAM buffer.ro Counter .1.3.6.1.4.1.426.1.5.5 |
rptrOverflowsThe total number of times the IN3000's FIFO has overflowed.ro Counter .1.3.6.1.4.1.426.1.5.6 |
rptrNoFreeBuffersThe number of packets received that had to be discarded due to lack of buffers.ro Counter .1.3.6.1.4.1.426.1.5.7 |
rptrTxTimeoutsThe total number of times a packet could not be sent before the transmit timer expired.ro Counter .1.3.6.1.4.1.426.1.5.8 |
rptrNICTxCollisionsThe total number of collision that occured while the ethernet controller attempted to transmit. This error is reported by the ethernet controller.ro Counter .1.3.6.1.4.1.426.1.5.9 |
rptrNICTxFifoUrunsThe total number of times the ethernet controller could not gain access to the ethernet before the ethernet controller's FIFO emptied.ro Counter .1.3.6.1.4.1.426.1.5.10 |
rptrNICTxCDHrtbtsThe number of times the ethernet controlled was unable to transmit a collision signal after transmission of a packet.ro Counter .1.3.6.1.4.1.426.1.5.11 |
rptrNICTxOutWinClsThe total number of collisions seen by the ethernet controller that occured after the slot time.ro Counter .1.3.6.1.4.1.426.1.5.12 |
rptrNICCarrierLostThe total number of times a carrier lost was detected by the ethernet controlled during the transmission of a packet.ro Counter .1.3.6.1.4.1.426.1.5.13 |
rptrInNoRxBufThe total number of times a packet was discarded due to lack of receive buffers.ro Counter .1.3.6.1.4.1.426.1.5.14 |
in3000StatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.6 |
groupOctetsTableThis table contains Repeater Group Level octets Statistics. SEQUENCE OF GroupOctetsEntry .1.3.6.1.4.1.426.1.6.1 |
groupOctetsEntryEach row of this table is associated to a TP3000 or RP3000. Note the the groups are numbered from 1 to 4. GroupOctetsEntry .1.3.6.1.4.1.426.1.6.1.1 |
gsoGroupIndexA unique value to the group. The groups are numbered from 1 to 4. The addresses set via the dip switches on the TP3000 and RP3000 are numbered 0 to 3. In order to calculate the group number add one (1) to the address set via the TP3000 or RP3000 dip switches.ro INTEGER .1.3.6.1.4.1.426.1.6.1.1.1 |
gsoHostOctetsRxOkThe total number of octets received by all ports in the group that were from valid packets and were addressed to the IN3000.ro Counter .1.3.6.1.4.1.426.1.6.1.1.2 |
gsoHostOctetsRxErrThe total number of octets received by all ports in the group that were from packets with errors and were addressed to the IN3000.ro Counter .1.3.6.1.4.1.426.1.6.1.1.3 |
gsoOctetsRxOkThe total number of octets received by all ports in the group that were from valid packets and were no addressed to the IN3000.ro Counter .1.3.6.1.4.1.426.1.6.1.1.4 |
gsoOctetsRxErrThe total number of octets received by all ports in the group that were from packets with errors and were not addressed to the IN3000.ro Counter .1.3.6.1.4.1.426.1.6.1.1.5 |
gsobkt64OkThe total number of packets received from all ports in the group that were 64 bytes in length (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.6 |
gsobkt64ErrThe total number of packets received from all ports in the group that were 64 bytes in length (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.7 |
gsobkt65to127OkThe total number of packets received from all ports in the group that were between 65 bytes and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.8 |
gsobkt65to127ErrThe total number of packets received from all ports in the group that were between 65 bytes and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.9 |
gsobkt128to255OkThe total number of packets received from all ports in the group that were between 128 bytes and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.10 |
gsobkt128to255ErrThe total number of packets received from all ports in the group that were between 128 bytes and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.11 |
gsobkt256to511OkThe total number of packets received from all ports in the group that were between 256 bytes and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.12 |
gsobkt256to511ErrThe total number of packets received from all ports in the group that were between 256 bytes and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.13 |
gsobkt512to1023OkThe total number of packets received from all ports in the group that were between 512 bytes and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.14 |
gsobkt512to1023ErrThe total number of packets received from all ports in the group that were between 512 bytes and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.15 |
gsobkt1024to1518OkThe total number of packets received from all ports in the group that were between 1024 bytes and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.16 |
gsobkt1024to1518ErrThe total number of packets received from all ports in the group that were between 1024 bytes and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.17 |
gsoRuntPacketsOkThe total number of packets received from all ports in the group that were less than 64 bytes, and did not contain any other errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.18 |
gsoRuntPacketsErrThe total number of packets reveived from all ports in the group that were less than 64 bytes and contained errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.19 |
gsoPacketsTooBigOkThe total number of packets reveived from all ports in the group that were larger than 1518 bytes, and did not contain any other errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.20 |
gsoPacketsTooBigErrThe total number of packets reveived from all ports in the group that were larger than 1518 bytes, and contained other errors.ro Counter .1.3.6.1.4.1.426.1.6.1.1.21 |
groupPacketTableThis table contains Repeater Group Level Packet Statistics. SEQUENCE OF GroupPacketEntry .1.3.6.1.4.1.426.1.6.2 |
groupPacketEntryEach row of this table is associated to a TP3000 or RP3000. Note the the groups are numbered from 1 to 4. GroupPacketEntry .1.3.6.1.4.1.426.1.6.2.1 |
gspGroupIndexA unique value to the group. The groups are numbered from 1 to 4. The addresses set via the dip switches on the TP3000 and RP3000 are numbered 0 to 3. In order to calculate the group number add one (1) to the address set via the dip switches.ro INTEGER .1.3.6.1.4.1.426.1.6.2.1.1 |
gspPacketsRxOkThe total number of packet received by all ports in the group that were valid packets.ro Counter .1.3.6.1.4.1.426.1.6.2.1.2 |
gspPacketsRxErrThe total number of packet received by all ports in the group that were packets with errors.ro Counter .1.3.6.1.4.1.426.1.6.2.1.3 |
gspPhysicalOkThe total number of packets received from all ports in the group that were unicast packets and were valid packets.ro Counter .1.3.6.1.4.1.426.1.6.2.1.4 |
gspPhysicalErrThe total number of packets received from all ports in the group that were unicast packets and were packets with errors.ro Counter .1.3.6.1.4.1.426.1.6.2.1.5 |
gspMulticastOkThe total number of packets received from all ports in the group that were multicast packets and were valid packets.ro Counter .1.3.6.1.4.1.426.1.6.2.1.6 |
gspMulticastErrThe total number of packets received from all ports in the group that were multicast packets and were packets with errors.ro Counter .1.3.6.1.4.1.426.1.6.2.1.7 |
gspBroadcastOkThe total number of packets received from all ports in the group that were broadcast packets and were valid packets.ro Counter .1.3.6.1.4.1.426.1.6.2.1.8 |
gspBroadcastErrThe total number of packets received from all ports in the group that were broadcast packets and were packets with errors.ro Counter .1.3.6.1.4.1.426.1.6.2.1.9 |
gspHostPhysicalOkThe total number of packets received from all ports in the group that were unicast packets, addressed to the IN3000 and did not have errors.ro Counter .1.3.6.1.4.1.426.1.6.2.1.10 |
gspHostPhysicalErrThe total number of packets received from all ports in the group that were unicast packets, addressed to the IN3000 and had errors.ro Counter .1.3.6.1.4.1.426.1.6.2.1.11 |
groupMiscTableThis table contains Repeater Group Level Statistics. SEQUENCE OF GroupMiscEntry .1.3.6.1.4.1.426.1.6.3 |
groupMiscEntryEach row of this table is associated to a TP3000 or RP3000. Note the the groups are numbered from 1 to 4. GroupMiscEntry .1.3.6.1.4.1.426.1.6.3.1 |
gsmGroupIndexA unique value to the group. The groups are numbered from 1 to 4. The addresses set via the dip switches on the TP3000 and RP3000 are numbered 0 to 3. In order to calculate the group number add one (1) to the address set via the dip switches.ro INTEGER .1.3.6.1.4.1.426.1.6.3.1.1 |
gsmNumPortsThe total number of ports contained in the group.ro INTEGER .1.3.6.1.4.1.426.1.6.3.1.2 |
gsmNameThe name of the group.rw DisplayString .1.3.6.1.4.1.426.1.6.3.1.3 |
gsmTypeThe microhub type.ro Enumeration .1.3.6.1.4.1.426.1.6.3.1.4 |
gsmNumLinkUpThe total number of ports in the group that have link status.ro Gauge .1.3.6.1.4.1.426.1.6.3.1.5 |
gsmNumLinkPulsesThe total number of ports in the group that have link pulses enabled.ro Gauge .1.3.6.1.4.1.426.1.6.3.1.6 |
gsmCollisionsThe total number of collisions detected by all ports in the group.ro Counter .1.3.6.1.4.1.426.1.6.3.1.7 |
gsmLateCollisionsThe total number of late collisions detected by all ports in the group.ro Counter .1.3.6.1.4.1.426.1.6.3.1.8 |
gsmPartitionsThe total number of partitions from all ports in the group.ro Counter .1.3.6.1.4.1.426.1.6.3.1.9 |
gsmJabbersThe total number of frames from all port in the group that were longer than 1518 bytes, and had a non integral number of bytes or a bad frame check sequence (FCS).ro Counter .1.3.6.1.4.1.426.1.6.3.1.10 |
gsmShortFragmentsTotal number of packets from all ports in the group that were less than 64 bytes, and had a non-integral number of octets or had a bad frame check sequence (FCS).ro Counter .1.3.6.1.4.1.426.1.6.3.1.11 |
gsmCrcFaeThe total number of packets reveived from all ports in the group that had frame alignment errors. Since there was a frame alignment error the packet also had a bad CRC.ro Counter .1.3.6.1.4.1.426.1.6.3.1.12 |
gsmCrcThe total number of packets received from all ports in the group that did not have a frame alignment error, but they had a bad CRC.ro Counter .1.3.6.1.4.1.426.1.6.3.1.13 |
gsmFifoOverrunThe total number of packets reveived from all port in the group that caused the ethernet controlled to overrun its FIFO.ro Counter .1.3.6.1.4.1.426.1.6.3.1.14 |
gsmDeferringThe total number of packets from all ports in the group that caused the ethernet controller to detect a jabber.ro Counter .1.3.6.1.4.1.426.1.6.3.1.15 |
in3000StatsPort OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.7 |
portOctetsTableThis table contains octet statistics that deal with the TP3000 and RP3000 ports. SEQUENCE OF PortOctetsEntry .1.3.6.1.4.1.426.1.7.1 |
portOctetsEntryEach row in this table is associated with a port in a TP3000 or RP3000. Note that groups are numbered 1 to 4 and ports are numbered 1 to 7. The row instance is made up of the group number and the port number. PortOctetsEntry .1.3.6.1.4.1.426.1.7.1.1 |
psoGroupIndexThe group that this port resides in. The groups are numbered 1 to 4.ro INTEGER .1.3.6.1.4.1.426.1.7.1.1.1 |
psoPortIndexThe port number of this port. Note that the ports are numbered 1 to 7. For the TP3000 the twisted pair ports are numbered 1 to 6 and the remaining ethernet port (either 10base2 or AUI) is port 7.ro INTEGER .1.3.6.1.4.1.426.1.7.1.1.2 |
psoHostOctetsRxOkThe total number of octets received on this port that were from packets without errors and were addressed to the IN3000.ro Counter .1.3.6.1.4.1.426.1.7.1.1.3 |
psoHostOctetsRxErrThe total number of octets received on this port that were from packets with errors and were addressed to the IN3000.ro Counter .1.3.6.1.4.1.426.1.7.1.1.4 |
psoOctetsRxOkThe total number of octets received on this port that were from packets without errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.5 |
psoOctetsRxErrThe total number of octets received on this port that were from packets with errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.6 |
psobkt64OkThe total number of packets receive by this port that were 64 bytes in length (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.7 |
psobkt64ErrThe total number of packets receive by this port that were 64 bytes in length (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.8 |
psobkt65to127OkThe total number of packets receive by this port that were between 65 and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.9 |
psobkt65to127ErrThe total number of packets receive by this port that were between 65 and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.10 |
psobkt128to255OkThe total number of packets receive by this port that were between 128 and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.11 |
psobkt128to255ErrThe total number of packets receive by this port that were between 128 and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.12 |
psobkt256to511OkThe total number of packets receive by this port that were between 256 and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.13 |
psobkt256to511ErrThe total number of packets receive by this port that were between 256 and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.14 |
psobkt512to1023OkThe total number of packets receive by this port that were between 512 and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.15 |
psobkt512to1023ErrThe total number of packets receive by this port that were between 512 and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.16 |
psobkt1024to1518OkThe total number of packets receive by this port that were between 1024 and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.17 |
psobkt1024to1518ErrThe total number of packets receive by this port that were between 1024 and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.18 |
psoRuntPacketsOkThe total number of packets received by this port that were less than 64 bytes, but contained no other errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.19 |
psoRuntPacketsErrThe total number of packets received by this port that were less than 64 bytes, and contained other errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.20 |
psoPacketsTooBigOkThe total number of packets received by this port that were greater than 1518 bytes, but contained no other errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.21 |
psoPacketsTooBigErrThe total number of packets received by this port that were greater than 1518 bytes, and contained other errors.ro Counter .1.3.6.1.4.1.426.1.7.1.1.22 |
portPacketTableThis table contains statistics that deal with the TP3000 and RP3000 ports. SEQUENCE OF PortPacketEntry .1.3.6.1.4.1.426.1.7.2 |
portPacketEntryEach row in this table is associated with a port in a TP3000 or RP3000. Note that groups are numbered 1 to 4 and ports are numbered 1 to 7. The row instance is made up of the group number and the port number. PortPacketEntry .1.3.6.1.4.1.426.1.7.2.1 |
pspGroupIndexThe group that this port resides in. The groups are numbered 1 to 4.ro INTEGER .1.3.6.1.4.1.426.1.7.2.1.1 |
pspPortIndexThe port number of this port. Note that the ports are numbered 1 to 7. For the TP3000 the twisted pair ports are numbered 1 to 6 and the remaining ethernet port (either 10base2 or AUI) is port 7.ro INTEGER .1.3.6.1.4.1.426.1.7.2.1.2 |
pspPacketsRxOkThe total number of packets received on this port that did no have any errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.3 |
pspPacketsRxErrThe total number of packets received on this port that had errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.4 |
pspPhysicalOkThe total number of unicast packets received on this port that did not have any errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.5 |
pspPhysicalErrThe total number of unicast packets received on this port that had errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.6 |
pspMulticastOkThe total number of multicast packets received on this port that did no have any errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.7 |
pspMulticastErrThe total number of multicast packets received on this port that have errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.8 |
pspBroadcastOkThe total number of broadcast packets that were received by this port and had no errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.9 |
pspBroadcastErrThe total number of broadcast packets that were received by this port and had errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.10 |
pspHostPhysicalOkThe total number of unicast packets received by this port that were addressed to the IN3000 and had no errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.11 |
pspHostPhysicalErrThe total number of unicast packets received by this port that were addressed to the IN3000 and had errors.ro Counter .1.3.6.1.4.1.426.1.7.2.1.12 |
portMiscTableThis table contains statistics that deal with the TP3000 and RP3000 ports. SEQUENCE OF PortMiscEntry .1.3.6.1.4.1.426.1.7.3 |
portMiscEntryEach row in this table is associated with a port in a TP3000 or RP3000. Note that groups are numbered 1 to 4 and ports are numbered 1 to 7. The row instance is made up of the group number and the port number. PortMiscEntry .1.3.6.1.4.1.426.1.7.3.1 |
psmGroupIndexThe group that this port resides in. The groups are numbered 1 to 4.ro INTEGER .1.3.6.1.4.1.426.1.7.3.1.1 |
psmPortIndexThe port number of this port. Note that the ports are numbered 1 to 7. For the TP3000 the twisted pair ports are numbered 1 to 6 and the remaining ethernet port (either 10base2 or AUI) is port 7.ro INTEGER .1.3.6.1.4.1.426.1.7.3.1.2 |
psmNameThe name assigned to this port.rw DisplayString .1.3.6.1.4.1.426.1.7.3.1.3 |
psmTypeThe port type.ro Enumeration .1.3.6.1.4.1.426.1.7.3.1.4 |
psmLinkStateThe link state of the port. Note that if link pulses are disabled then the link state will be up.ro Enumeration .1.3.6.1.4.1.426.1.7.3.1.5 |
psmLinkPulsesThis variable is used to check or set whether this port has link pulses enabled.rw Enumeration .1.3.6.1.4.1.426.1.7.3.1.6 |
psmCollisionsThe total number of collisions that were received by this port.ro Counter .1.3.6.1.4.1.426.1.7.3.1.7 |
psmLateCollisionsThe total number of late collisions that were received by this port.ro Counter .1.3.6.1.4.1.426.1.7.3.1.8 |
psmPartitionsThe total number of times this port entered the partitioned state.ro Counter .1.3.6.1.4.1.426.1.7.3.1.9 |
psmJabbersThe total number of frames received by this port that were longer than 1518 bytes, and had a non- integral number of octets or had a bad frame check sequence (FCS).ro Counter .1.3.6.1.4.1.426.1.7.3.1.10 |
psmShortFragmentsThe total number of frames received by this port that were less than 64 bytes, and had a non- integral number of octets or had a bad frame check sequence (FCS).ro Counter .1.3.6.1.4.1.426.1.7.3.1.11 |
psmCrcFaeThe total number of packets reveived by this port that had frame alignment errors. Since there was a frame alignment error the packet also had a bad CRC.ro Counter .1.3.6.1.4.1.426.1.7.3.1.12 |
psmCrcThe total number of packets reveived by this port that did not have frame alignment errors but had a bad CRC.ro Counter .1.3.6.1.4.1.426.1.7.3.1.13 |
psmFifoOverrunThe total number of packets reveived by this port that caused the ethernet controlled to overrun its FIFO.ro Counter .1.3.6.1.4.1.426.1.7.3.1.14 |
psmDeferringThe total number of packets received by this port the caused the ethernet controller to detect a jabber.ro Counter .1.3.6.1.4.1.426.1.7.3.1.15 |
in3000StatsMemory OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.8 |
initHeapSizeThe initial heap memory size in bytes.ro INTEGER .1.3.6.1.4.1.426.1.8.1 |
usedHeapAmount of heap memory in use in bytes.ro Gauge .1.3.6.1.4.1.426.1.8.2 |
freeHeapAmount of free heap memory in bytes.ro Gauge .1.3.6.1.4.1.426.1.8.3 |
heapStatusThe status of the heap. A notOk(2) response means the heap has been corrupted, and an ok(1) reponse means the heap is OK. The heap check is preformed at the time of memory coalescing and not on demand. Therefore, the value of the variable may not match the current state of the heap. If you wish to have the heap checked on demand please use the heapTest variable to preform this test.ro Enumeration .1.3.6.1.4.1.426.1.8.4 |
mallocCallsNumber of times malloc() has been called.ro Counter .1.3.6.1.4.1.426.1.8.5 |
reallocCallsNumber of times realloc() has been called.ro Counter .1.3.6.1.4.1.426.1.8.6 |
callocCallsNumber of times calloc() has been called.ro Counter .1.3.6.1.4.1.426.1.8.7 |
freeCallsNumber of times free() has been called.ro Counter .1.3.6.1.4.1.426.1.8.8 |
noMemoryAvailableThe number of times that there was not enough memory to complete a memory allocation operation.ro Counter .1.3.6.1.4.1.426.1.8.9 |
mnodeCoalescesThe number of times that the memory manager coalesced mnodes.ro Counter .1.3.6.1.4.1.426.1.8.10 |
coalesceMemCallsThe number of times that the memory manager was called to coalesced mnodes.ro Counter .1.3.6.1.4.1.426.1.8.11 |
coalesceThresholdThis variable is used to set the number of free calls before coalescing memory. This change takes effect as soon as the variable is changed.rw INTEGER .1.3.6.1.4.1.426.1.8.12 |
in3000StatsIcmp OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.9 |
inUnknownTypesNumber of ICMP packets received with unknown type fields.ro Counter .1.3.6.1.4.1.426.1.9.1 |
bufferPoolEmptyNumber of times an ICMP packet was received and there were not enough available buffers.ro Counter .1.3.6.1.4.1.426.1.9.2 |
dataBufferTooSmallNumber of times an ICMP packet was received and the data buffer was too small.ro Counter .1.3.6.1.4.1.426.1.9.3 |
in3000StatsOS OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.10 |
threadCreateReqThe number of thread create requests.ro Counter .1.3.6.1.4.1.426.1.10.1 |
threadCreateOkThe number of successful thread creates.ro Counter .1.3.6.1.4.1.426.1.10.2 |
threadCreateFailThe number of unsuccessful thread creates.ro Counter .1.3.6.1.4.1.426.1.10.3 |
threadTableFullThe number of requests to create a thread that failed because the maximum number of threads were reached.ro Counter .1.3.6.1.4.1.426.1.10.4 |
threadKillThe number of threads that have been killed.ro Counter .1.3.6.1.4.1.426.1.10.5 |
threadMaximumThe maximum number of threads that may be created. The set will take effect the next time the IN3000 is initialized.rw INTEGER .1.3.6.1.4.1.426.1.10.6 |
defaultStackSizeThe default stack size (in bytes) for each thread. The set will take effect the next time the IN3000 is initialized.rw INTEGER .1.3.6.1.4.1.426.1.10.7 |
defaultTimeSliceThe default time slice (in milliseconds) for each thread. The set will take effect the next time the IN3000 is initialized. All newly created threads will get the new time slice.rw INTEGER .1.3.6.1.4.1.426.1.10.8 |
bogusInterruptsThe total number of bogus interrupts.ro Counter .1.3.6.1.4.1.426.1.10.9 |
divideErrorThe total number of divide by zero error interrupts.ro Counter .1.3.6.1.4.1.426.1.10.10 |
singleStepThe total number of single step interrupts.ro Counter .1.3.6.1.4.1.426.1.10.11 |
breakpointThe total number of break point interrupts.ro Counter .1.3.6.1.4.1.426.1.10.12 |
interruptOverflowThe total number of interrupt overflows.ro Counter .1.3.6.1.4.1.426.1.10.13 |
arrayBoundsCheckThe total number of array bound check interrupts.ro Counter .1.3.6.1.4.1.426.1.10.14 |
invalidOpcodeTh total number of invalid op code interrupts.ro Counter .1.3.6.1.4.1.426.1.10.15 |
escapeOpcodeThe total number of escape opcode interrupts.ro Counter .1.3.6.1.4.1.426.1.10.16 |
coprocessorFaultTh total number of coprocessor fault interrupts.ro Counter .1.3.6.1.4.1.426.1.10.17 |
threadTableA table containing the currently running threads. SEQUENCE OF ThreadEntry .1.3.6.1.4.1.426.1.10.18 |
threadEntryInformation about a particular thread. The instance of the table entries is the tid. ThreadEntry .1.3.6.1.4.1.426.1.10.18.1 |
tidThis is the thread identifier. This is the unique number assigned to a thread. This value is also the instance of the table row.ro INTEGER .1.3.6.1.4.1.426.1.10.18.1.1 |
nameThis is the thread's assigned name.ro DisplayString .1.3.6.1.4.1.426.1.10.18.1.2 |
priorityThis is the thread's priority.ro INTEGER .1.3.6.1.4.1.426.1.10.18.1.3 |
muxCountThis is the thread's mutual exclusion Count.ro INTEGER .1.3.6.1.4.1.426.1.10.18.1.4 |
statusThis is the thread's status at the time of the SNMP query.ro Enumeration .1.3.6.1.4.1.426.1.10.18.1.5 |
stackSizeThis is the thread's stack size.ro INTEGER .1.3.6.1.4.1.426.1.10.18.1.6 |
in3000StatsArp OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.11 |
arpInReqsThe number of received ARP requests.ro Counter .1.3.6.1.4.1.426.1.11.1 |
arpInRplsThe number of ARP replies received.ro Counter .1.3.6.1.4.1.426.1.11.2 |
arpOutReqsThe number of ARP requests sent.ro Counter .1.3.6.1.4.1.426.1.11.3 |
arpOutRplsThe number of ARP replies sent.ro Counter .1.3.6.1.4.1.426.1.11.4 |
arpGetReqsThe number of ARP Get requests.ro Counter .1.3.6.1.4.1.426.1.11.5 |
arpPutReqsThe number of ARP Put requests.ro Counter .1.3.6.1.4.1.426.1.11.6 |
arpDeadEntriesThe number of dead ARP entries.ro Counter .1.3.6.1.4.1.426.1.11.7 |
arpCacheSizeThe maximum number of ARP cache entries. Changing this value will take place on next reboot.rw INTEGER .1.3.6.1.4.1.426.1.11.8 |
arpEntryTimeoutThe length of time (in seconds) that an ARP entry is stored. If an entry is not accessed within this time period the entry is purged. Changes to this take place immediately.rw INTEGER .1.3.6.1.4.1.426.1.11.9 |
arpNumRetriesThe number of ARP request retries before giving up. Changes to this take place after next reboot.rw INTEGER .1.3.6.1.4.1.426.1.11.10 |
arpReplyTimeoutThe length of time ARP waits for an ARP response. Changes to this take place immediately.rw INTEGER .1.3.6.1.4.1.426.1.11.11 |
in3000StatsIp OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.12 |
inHdrTooSmallThe number of IP packets with headers too small. This is a subset of ipHdrErrors.ro Counter .1.3.6.1.4.1.426.1.12.1 |
inHdrBadVersionThe number of IP packets with Incrrect version information. This is a subset of ipHdrErrors.ro Counter .1.3.6.1.4.1.426.1.12.2 |
inHdrBadCheckSumThe number of IP packets with invalid checksums. This is a subset of ipHdrErrors.ro Counter .1.3.6.1.4.1.426.1.12.3 |
inHdrBadOptionThe number of IP packets with one or more incorrect options. This is a subset of ipHdrErrors.ro Counter .1.3.6.1.4.1.426.1.12.4 |
inDataNotAllocatedThis is an internal error. This is a subset of inDiscards.ro Counter .1.3.6.1.4.1.426.1.12.5 |
inNoPacketBuffersThe number of IP packets received that had to be discarded due to lack of buffer space. This is a subset of inDiscards.ro Counter .1.3.6.1.4.1.426.1.12.6 |
outNoPacketBuffersThe number of IP packets that were to be sent but had to be discarded due to lack of buffer space. This is a subset of outDiscards.ro Counter .1.3.6.1.4.1.426.1.12.7 |
outBadTransmitsThe number of IP packets that could not be transmitted even though the packet was valid.ro Counter .1.3.6.1.4.1.426.1.12.8 |
outAddrNotResolvedThe number of IP packets that could not be transmitted due to ARP failure. The address could not be resolved.ro Counter .1.3.6.1.4.1.426.1.12.9 |
reasmTimeoutThe IP reasmebly timeout.rw INTEGER .1.3.6.1.4.1.426.1.12.10 |
in3000StatsHmi OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.13 |
hmiReqsThe number of HMI requests received.ro Counter .1.3.6.1.4.1.426.1.13.1 |
hmiRespThe number of HMI reresponses sent. This does not include acknowledgement frames.ro Counter .1.3.6.1.4.1.426.1.13.2 |
hmiErrorThe number of errors that occured processing HMI requests.ro Counter .1.3.6.1.4.1.426.1.13.3 |
hmiAckOkThe number of HMI Good Acknowledgements sent.ro Counter .1.3.6.1.4.1.426.1.13.4 |
hmiAckBadThe number of HMI Bad Acknowledgements sent.ro Counter .1.3.6.1.4.1.426.1.13.5 |
hmiTrapThe number of HMI traps sent.ro Counter .1.3.6.1.4.1.426.1.13.6 |
hmiIdReqThe number of HMI ID requests sent.ro Counter .1.3.6.1.4.1.426.1.13.7 |
hmiGetInfoReqThe number of HMI GET INFO requests sent.ro Counter .1.3.6.1.4.1.426.1.13.8 |
hmiSelftestReqThe number of HMI SELFTEST requests sent.ro Counter .1.3.6.1.4.1.426.1.13.9 |
hmiPortEnableReqThe number of HMI PORT ENABLE requests sent.ro Counter .1.3.6.1.4.1.426.1.13.10 |
hmiPortDisableReqThe number of HMI PORT DISABLE requests sent.ro Counter .1.3.6.1.4.1.426.1.13.11 |
hmiStatusReqThe number of HMI STATUS requests sent.ro Counter .1.3.6.1.4.1.426.1.13.12 |
hmiRepeaterReqThe number of HMI REPEATER requests sent.ro Counter .1.3.6.1.4.1.426.1.13.13 |
hmiPortObjectsReqThe number of HMI POR OBJECTS request sent.ro Counter .1.3.6.1.4.1.426.1.13.14 |
hmiPortChangesReqThe number of HMI PORT CHANGES requests sent.ro Counter .1.3.6.1.4.1.426.1.13.15 |
hmiSelfTestStatReqThe number of HMI SELF TEST STATUTS requests sent.ro Counter .1.3.6.1.4.1.426.1.13.16 |
hmiDebugOnReqThe number of HMI DEBUG ON requests sent.ro Counter .1.3.6.1.4.1.426.1.13.17 |
hmiDebugOffReqThe number of HMI DEBUG OFF requests sent.ro Counter .1.3.6.1.4.1.426.1.13.18 |
hmiGetInfoRespThe number of HMI GET INFO responses sent.ro Counter .1.3.6.1.4.1.426.1.13.19 |
hmiSelfTestRespThe number of HMI SELF TEST responses sent.ro Counter .1.3.6.1.4.1.426.1.13.20 |
hmiStatusRespThe number of HMI STATUS responses sent.ro Counter .1.3.6.1.4.1.426.1.13.21 |
hmiRepeaterRespThe number of HMI REPEATER responses sent.ro Counter .1.3.6.1.4.1.426.1.13.22 |
hmiPortObjectsRespThe number of HMI PORT OBJECTS responses sent.ro Counter .1.3.6.1.4.1.426.1.13.23 |
hmiPortChangesRespThe number of HMI PORT CHANGES responses sent.ro Counter .1.3.6.1.4.1.426.1.13.24 |
hmiSelfTestStatRespThe number of HMI SLEF TEST STATUS responses sent.ro Counter .1.3.6.1.4.1.426.1.13.25 |
in3000StatsUart OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.14 |
uartInOctetsThe number of octets received by the UART driver.ro Counter .1.3.6.1.4.1.426.1.14.1 |
uartOutOctetsThe number of octets sent by the UART driver.ro Counter .1.3.6.1.4.1.426.1.14.2 |
uartInDeliversThe number of octets received by the Uart and passed to upper layer protocol, such as HMI.ro Counter .1.3.6.1.4.1.426.1.14.3 |
uartOutDeliversThe number of bytes sent by the Uart there were from a higher level protocol, such as HMI.ro Counter .1.3.6.1.4.1.426.1.14.4 |
uartBaudRateThe baud rate of the serial port.ro Enumeration .1.3.6.1.4.1.426.1.14.5 |
uartDataBitsThe the number of data bits used by the serial port.rw Enumeration .1.3.6.1.4.1.426.1.14.6 |
uartStopBitsThe number of stop bits used by the serial port.rw Enumeration .1.3.6.1.4.1.426.1.14.7 |
uartParityThe data parity used by the serial port.rw Enumeration .1.3.6.1.4.1.426.1.14.8 |
uartHandshakingThe handshaking used bu the serial port.rw Enumeration .1.3.6.1.4.1.426.1.14.9 |
uartOverrunErrorsThe number of time the UART has overrun causing an error.ro Counter .1.3.6.1.4.1.426.1.14.10 |
uartParityErrorsThe number frames received from the UART that had parity errors.ro Counter .1.3.6.1.4.1.426.1.14.11 |
uartFramingErrorsThe number frames received from the UART that had framing errors.ro Counter .1.3.6.1.4.1.426.1.14.12 |
uartBreakIndicatorsThe number indicators received by the UART.ro Counter .1.3.6.1.4.1.426.1.14.13 |
in3000SelfTests OBJECT IDENTIFIER .1.3.6.1.4.1.426.1.15 |
dallasTestThis variable is used to run a diagnostic test on the Universal Clock. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.rw Enumeration .1.3.6.1.4.1.426.1.15.1 |
flashTestThis variable is used to run a diagnostic test on the Non-Volitile RAM. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.rw Enumeration .1.3.6.1.4.1.426.1.15.2 |
uartTestThis variable is used to run a diagnostic test on the serial port (UART). To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.rw Enumeration .1.3.6.1.4.1.426.1.15.3 |
nicTestThis variable is used to run a diagnostic test on the ethernet controller. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.rw Enumeration .1.3.6.1.4.1.426.1.15.4 |
netioTestThis variable is used to run a diagnostic test on the ethernet modules in the microhubs. To run the test this variable must be set to testHub1, testHub2, testHub3 or testHub4. Setting this to any other value will result in an error.rw Enumeration .1.3.6.1.4.1.426.1.15.5 |
heapTestThis variable is used to run a diagnostic test on the memory heap. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.rw Enumeration .1.3.6.1.4.1.426.1.15.6 |