CLARENT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CLARENT-MIB.
276
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
276 total| Object Name |
|---|
clarent OBJECT IDENTIFIER .1.3.6.1.4.1.2858 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2858 |
gateway OBJECT IDENTIFIER .1.3.6.1.4.1.2858.1 |
gatewayStatusThe number of ports currently in use, as well as the
number of calls, call time, and hold time for each port
(# sign-delimited string)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.1.1 |
portInUseCountNumber of ports currently in usero INTEGER .1.3.6.1.4.1.2858.1.2 |
gwnumberOfCallsNumber of calls per port (comma-delimited string)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.1.3 |
portCallTimeCall time per port (comma-delimited string)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.1.4 |
portHoldTimeHold time per port (comma-delimited string)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.1.5 |
trafficStatusTraffic information: idle, ingress, egress, fax, and out of service timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.1.6 |
gwOperStateState of the GW, enabled means running, disabled means not runningro Enumeration .1.3.6.1.4.1.2858.1.7 |
gwBoardTypeType of boards loaded in Gatewayro Enumeration .1.3.6.1.4.1.2858.1.8 |
gwNumBoardsNumber of boards loaded in Gatewayro INTEGER .1.3.6.1.4.1.2858.1.9 |
gwPortsPerFirstSpannumber of ports on the first span in a multi-span boardro INTEGER .1.3.6.1.4.1.2858.1.10 |
gwPortsPerSpannumber of ports on a span in a multi-span boardro INTEGER .1.3.6.1.4.1.2858.1.11 |
gwSpansPerBoardnumber of spans on a boardro INTEGER .1.3.6.1.4.1.2858.1.12 |
gwPortStatusListreturns an OCTET string of length equal to the number of ports
in the system. Each byte indicates the status of the port at that
offset. That values are identical to the portStatus Value defined
in the Port Table belowro OCTET STRING .1.3.6.1.4.1.2858.1.13 |
ccreadvars OBJECT IDENTIFIER .1.3.6.1.4.1.2858.2 |
ccStatusClarent Command Center statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.2.1 |
ccOperStateState of the CC, enabled means running, disabled means not runningro Enumeration .1.3.6.1.4.1.2858.2.2 |
rdc OBJECT IDENTIFIER .1.3.6.1.4.1.2858.3 |
rdcStatusRoaming Domain Controller statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.3.1 |
clarent-traps OBJECT IDENTIFIER .1.3.6.1.4.1.2858.4 |
gatewayIsDownClarent Gateway is down TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9901 |
restartGWSuccessClarent Gateway restarted successfully TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9902 |
restartGWFailedClarent Gateway failed to restart TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9903 |
ccIsDownClarent Command Center is down TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9904 |
restartCCSuccessClarent Command Center restarted successfully TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9905 |
restartCCFailedClarent Command Center failed to restart TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9906 |
lostCCClarent Gateway lost its connection to the specified Command Center TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9907 |
connectCCFailedClarent Gateway cannot connect to the specified Command Center TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9908 |
portOutOfServiceClarent Gateway port is out of service TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9911 |
portInServiceClarent Gateway port is back in service TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9912 |
dialUpNoVoicePortClarent Gateway cannot dial number; no voice port is available TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9913 |
connectNoVoicePortClarent Gateway cannot connect to another gateway; not responding TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9914 |
gatewayConnectClarent Gateway, at the specified IP address, connected to Command Center TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9915 |
gatewayDisconnectClarent Gateway, at the specified IP address, disconnected from Command Center TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9916 |
gwNotRegisteredClarent Gateway is not registered TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9917 |
callRatingFailedCall rating failed TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9918 |
invalidCCLicenseInvalid Command Center license TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9919 |
validCCTmpLicenseValid temporary Command Center license TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9920 |
ss7LinkUpSS7 link is up TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9921 |
ss7LinkDownSS7 link is down TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9922 |
gwAppShutdownClarent Gateway shut down TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9927 |
resettingDSPBrdResetting DSP board TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9928 |
clrHseCreditSChgClarent Connect clearinghouse credit status changed TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9929 |
ccCreditSChgClarent Connect credit status changed TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9930 |
validateEGErrClarent Gateway validate egress error TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9931 |
licRollBackClarent Command Center license key change rolled back TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9932 |
clarentInfoGeneric Clarent error trap:
Severity:
Critical(0), Major(1), Minor(2), Warning(3), or Information(4)
Class:
Configuration(0), Hardware(1), or Software(2)
Number of trap
Count of total number of traps per class
Descriptive text string TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9933 |
softwareUpdateSoftware update:
Name of package
Package operation: Download(0), Unpack(1), Install(2), Prepare(3), Commit(4), Abort(5), Delete(8)
Package operation status
Error count TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9934 |
numberInterceptCall placed to the intercept number TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9935 |
tpIsDownClarent ThroughPacket server is down TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9936 |
restartTPFailedClarent ThroughPacket server failed to restart TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9937 |
tpRestartedClarent ThroughPacket server restarted successfully TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9938 |
threshHoldTrapClarent ThreshHold Trap, indicates that a particular Threshold
has been exceeded or rearmed by the named Application. This trap contains
1) The Severity of the Threshold (Critical, Major, Minor, Warning, Information)
2) the name of the Application (e.g. ThroughPacket)
3) the ThreshHold Name (e.g. PacketsperSecond, BytesPerSecond )
4) the ThreshHold Value that was exceeded/rearmed ( e.g. 350000 )
5) the current value of the variable being sampled. ( e.g. BytesPerSecond 355043 )
6) the Action, Exceeded or Rearmed. Thresholds are rearmed when the moving
average of the variable being measured is at 75% of the ThreshHold. TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9939 |
systemRebootThe system is rebooting in response to a startShutdown command TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9940 |
rebootCommandThe system has been enabled to receive a startShutdown command TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9941 |
cDiskSpaceLowDrive has less than 50MB of free space available. This trap is issued on an hourly basis
if the condition persists. TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9942 |
cNoConnectRouteClarent Connect partner does not have a route for this call. This trap is issued
no more than once every 5 minutes. TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9943 |
dbErrorClarent DB error trap contains the following information
Severity:
Critical(0), Major(1), Minor(2), Warning(3), or Information(4)
Database error number
Descriptive error text string
Count of total number of database error traps sent since machine power up TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9944 |
dbClerkStartedA new database clerk was started. The value of trapNumber represents the total number of
clerks running. TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9945 |
restartDMFailedClarent Distribution Service failed to restart TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9946 |
dmRestartedClarent Distribution Service restarted successfully TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9947 |
dmIsDownClarent Distribution Service is down TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9948 |
sigGWMTPPauseThe Message Transfer Protocol paused TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9949 |
sigGWMTPResumeThe Message Transfer Protocol resumed TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9950 |
sigGWTaskActiveA signaling task started TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9951 |
pinSuspendedAn account was suspended TRAP-TYPE .1.3.6.1.4.1.2858.4.0.9952 |
clearinghouse OBJECT IDENTIFIER .1.3.6.1.4.1.2858.5 |
gwControl OBJECT IDENTIFIER .1.3.6.1.4.1.2858.6 |
gwControlValControls Clarent Gatewayrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.6.1 |
trapParm1Allows traps to have integer parametersrw INTEGER .1.3.6.1.4.1.2858.6.2 |
trapParm2Allows traps to have integer parametersrw INTEGER .1.3.6.1.4.1.2858.6.3 |
trapParm3Allows traps to have integer parametersrw INTEGER .1.3.6.1.4.1.2858.6.4 |
trapParm4Allows traps to have string parametersrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.6.5 |
clarentcfgPrivate control fieldrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.6.6 |
enablePortEnable the port passed in the varbind. For example, to enable port 9,
set the value of this variable to 9. Setting the value of this variable
to -1 enables all ports.rw INTEGER .1.3.6.1.4.1.2858.6.7 |
disablePortDisable the port passed in the varbind. For example, to disable port 11,
set the value of this variable to 11. Setting the value of this variable
to -1 disables all ports.rw INTEGER .1.3.6.1.4.1.2858.6.8 |
hangupPortHang up the port passed in the varbind. For example, to hang up port 10,
set the value of this variable to 10. Setting the value of this variable
to -1 hangs up all ports.rw INTEGER .1.3.6.1.4.1.2858.6.9 |
ccControl OBJECT IDENTIFIER .1.3.6.1.4.1.2858.7 |
ccControlvalControls Clarent Command Centerrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.7.1 |
gatewayports OBJECT IDENTIFIER .1.3.6.1.4.1.2858.8 |
gwNumPhysicalPortsNumber of physical gateway ports present on this system (regardless of
their current states)ro INTEGER .1.3.6.1.4.1.2858.8.1 |
gwPortTableA list of gateway port entries. The number of
usable ports is governed by the number of licensed ports. SEQUENCE OF GWPortEntry .1.3.6.1.4.1.2858.8.2 |
gwPortEntryThe status of a port GWPortEntry .1.3.6.1.4.1.2858.8.2.1 |
portIndexA unique number for each port, ranging from 0 (zero) to the
number of physical portsro INTEGER .1.3.6.1.4.1.2858.8.2.1.1 |
portStatusPort statero Enumeration .1.3.6.1.4.1.2858.8.2.1.2 |
numberOfCallsNumber of calls made on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.3 |
avgHoldTimeAverage time per call on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.4 |
xmitCountro INTEGER .1.3.6.1.4.1.2858.8.2.1.5 |
recvCountro INTEGER .1.3.6.1.4.1.2858.8.2.1.6 |
ingressTimeTotal ingress time, in seconds, on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.7 |
ingressCountTotal number of ingress calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.8 |
egressTimeTotal egress time, in seconds, on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.9 |
egressCountTotal number of egress calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.10 |
clarentreservedReservedro INTEGER .1.3.6.1.4.1.2858.8.2.1.11 |
totalVoiceUsageTime, in seconds, used for voice calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.12 |
voicecountTotal number of voice calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.13 |
totalFaxUsageTime, in seconds, used for fax calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.14 |
faxcountTotal number of fax calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.15 |
totalDataUsageTime, in seconds, used for data transfer/modem calls on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.16 |
datacountNumber of data events on the portro INTEGER .1.3.6.1.4.1.2858.8.2.1.17 |
linePortStateLine port statero Enumeration .1.3.6.1.4.1.2858.8.2.1.18 |
linePortLocMStateLocal maintenance state of the telephone line to the portro Enumeration .1.3.6.1.4.1.2858.8.2.1.19 |
linePortRemMStateRemote maintenance state of the telephone line to the portro Enumeration .1.3.6.1.4.1.2858.8.2.1.20 |
ipPortStateIP port statero Enumeration .1.3.6.1.4.1.2858.8.2.1.21 |
ipPortLocMStateLocal maintenance state of the IP connection between gatewaysro Enumeration .1.3.6.1.4.1.2858.8.2.1.22 |
ipPortRemMStateRemote maintenance state of the IP connection between gateways.ro Enumeration .1.3.6.1.4.1.2858.8.2.1.23 |
connectedCallsNumber of calls answeredro INTEGER .1.3.6.1.4.1.2858.8.2.1.24 |
remoteChannelPort number on the remote gateway, if the port is connectedro INTEGER .1.3.6.1.4.1.2858.8.2.1.25 |
remoteGWIdID of the remote gateway, if the port is connectedro INTEGER .1.3.6.1.4.1.2858.8.2.1.26 |
currentHoldTimeCurrent hold time, in seconds, if the port is connectedro INTEGER .1.3.6.1.4.1.2858.8.2.1.27 |
currentAniCurrent ANI, if the port is connectedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.8.2.1.28 |
currentDnisCurrent DNIS, if the port is connectedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.8.2.1.29 |
gatewaytable OBJECT IDENTIFIER .1.3.6.1.4.1.2858.9 |
gwNumAttachedThe number of Clarent Gateways currently connected to the Command Centerro INTEGER .1.3.6.1.4.1.2858.9.1 |
gwTableA list of Clarent Gateway entries SEQUENCE OF GWEntry .1.3.6.1.4.1.2858.9.2 |
gwEntryClarent Gateway entry GWEntry .1.3.6.1.4.1.2858.9.2.1 |
gwIdA unique number for each Clarent Gatewayro INTEGER .1.3.6.1.4.1.2858.9.2.1.1 |
serverIpAddrIP Address of the Clarent Gatewayro IpAddress .1.3.6.1.4.1.2858.9.2.1.2 |
inServerTableWhether the gateway is in the SERVER-INFO tablero Enumeration .1.3.6.1.4.1.2858.9.2.1.3 |
gwtrafficstats OBJECT IDENTIFIER .1.3.6.1.4.1.2858.10 |
totalIntervalTime, in seconds, since any member of the Traffic Stats group was last readro INTEGER .1.3.6.1.4.1.2858.10.1 |
totalEventCountTotal number of events in gatewayro INTEGER .1.3.6.1.4.1.2858.10.2 |
totalIngressTimeTotal time, in seconds, for ingress trafficro INTEGER .1.3.6.1.4.1.2858.10.3 |
totalIngressCountTotal number of ingress eventsro INTEGER .1.3.6.1.4.1.2858.10.4 |
totalEgressTimeTotal time, in seconds, for egress trafficro INTEGER .1.3.6.1.4.1.2858.10.5 |
totalEgressCountTotal number of egress eventsro INTEGER .1.3.6.1.4.1.2858.10.6 |
totalFaxTimeTotal time, in seconds, for fax trafficro INTEGER .1.3.6.1.4.1.2858.10.7 |
totalFaxCountTotal number of fax eventsro INTEGER .1.3.6.1.4.1.2858.10.8 |
totalOutSvcTimeTotal time, in seconds, that the gateway has been out of service :: Reserved; Not Implementedro INTEGER .1.3.6.1.4.1.2858.10.9 |
totalOutSvcCountTotal number of egress events :: Reserved; Not Implementedro INTEGER .1.3.6.1.4.1.2858.10.10 |
totalDataTimeTotal time, in seconds, for data trafficro INTEGER .1.3.6.1.4.1.2858.10.11 |
totalDataCountTotal number of data eventsro INTEGER .1.3.6.1.4.1.2858.10.12 |
totalVoiceTimeTotal time, in seconds, for voice trafficro INTEGER .1.3.6.1.4.1.2858.10.13 |
totalVoiceCountTotal number of voice eventsro INTEGER .1.3.6.1.4.1.2858.10.14 |
totalConnectCallTotal number of ingress calls that were terminated at a remote gatewayro INTEGER .1.3.6.1.4.1.2858.10.15 |
trap-Parameters OBJECT IDENTIFIER .1.3.6.1.4.1.2858.48 |
trapSeverityTrap severityro Enumeration .1.3.6.1.4.1.2858.48.1 |
trapClassTrap classro Enumeration .1.3.6.1.4.1.2858.48.2 |
trapNumberClass-specific trap numberro INTEGER .1.3.6.1.4.1.2858.48.3 |
trapTextText on a per trap Basisro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.48.4 |
trapCountNumber of specific traps sent from the agentro INTEGER .1.3.6.1.4.1.2858.48.5 |
trapAppNameName of the Clarent Application issuing the Trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.48.6 |
threshHoldNameName of the Threshold Package being reported on in a ThreshHold Trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.48.7 |
threshHoldValueThe ThreshHoldValue That is being exceeded or rearmedro INTEGER .1.3.6.1.4.1.2858.48.8 |
currentValueThe current value of the paramater that has exceeded or rearmed the
threshHold in the ThreshHold Trapro INTEGER .1.3.6.1.4.1.2858.48.9 |
threshHoldActionThreshHold Actionro Enumeration .1.3.6.1.4.1.2858.48.10 |
mgt OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100 |
packageManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.1 |
numPackagesNumber of packages on a Clarent Network Element.ro INTEGER .1.3.6.1.4.1.2858.100.1.1 |
packageTableA list of package entries SEQUENCE OF PackageEntry .1.3.6.1.4.1.2858.100.1.2 |
packageEntryPackage status entry PackageEntry .1.3.6.1.4.1.2858.100.1.2.1 |
packageNameUnique name of the packagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.1 |
packageStatusPackage statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.2 |
downloadStatusPackage download statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.3 |
downloadMessagePackage download status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.4 |
downloadErrorPackage download errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.5 |
unpackStatusPackage unpack statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.6 |
unpackMessagePackage unpack status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.7 |
unpackErrorPackage unpack errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.8 |
installStatusPackage install statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.9 |
installMessagePackage install status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.10 |
installErrorPackage install errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.11 |
prepareStatusPackage prepare statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.12 |
prepareMessagePackage prepare status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.13 |
prepareErrorPackage prepare errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.14 |
commitStatusPackage commit statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.15 |
commitMessagePackage commit status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.16 |
commitErrorPackage commit errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.17 |
abortStatusPackage abort statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.18 |
abortMessagePackage abort status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.19 |
abortErrorPackage abort errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.20 |
loadStatusPackage load statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.21 |
loadMessagePackage load status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.22 |
loadErrorPackage load errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.23 |
deleteStatusPackage delete statusro Enumeration .1.3.6.1.4.1.2858.100.1.2.1.24 |
deleteMessagePackage delete status messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.2.1.25 |
deleteErrorPackage delete errorro INTEGER .1.3.6.1.4.1.2858.100.1.2.1.26 |
commitLevelMode of operation in which the package was installedrw Enumeration .1.3.6.1.4.1.2858.100.1.2.1.27 |
downLoadCommandInitiate a DOWNLOAD command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.3 |
unpackCommandInitiate an UNPACK command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.4 |
installCommandInitiate an INSTALL command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.5 |
prepareCommandInitiate a PREPARE command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.6 |
commitCommandInitiate a COMMIT command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.7 |
abortCommandInitiate an ABORT command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.8 |
loadCommandInitiate a LOAD command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.9 |
baseURLUse this variable to set/get the BASE URL, which is a well-known URL
identifying the location from which packages are downloaded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.10 |
deleteCommandInitiate a DELETE command. In the SET command, specify
the package name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.1.11 |
packageOperationList of allowed package operationsrw Enumeration .1.3.6.1.4.1.2858.100.1.99999 |
gwStatisticsManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.2 |
gwEnableStatsEnables statistics messages from the gateway to the Command Center.
Specify a value of 1 to enable statistics. The default value is 0 (zero),
which disables statistics.rw INTEGER .1.3.6.1.4.1.2858.100.2.1 |
gwStatsIntervalInterval, in minutes, between gateway statistic messages from the gateway
to the Command Centerrw INTEGER .1.3.6.1.4.1.2858.100.2.2 |
throughPacket OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.3 |
tpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.3.1 |
tpstatusCurrent status of the Clarent ThroughPacket serverro Enumeration .1.3.6.1.4.1.2858.100.3.1.1 |
tpstatusCodeIf tpstatus is inError, interrogate this variable for more information.ro INTEGER .1.3.6.1.4.1.2858.100.3.1.2 |
tpOperStateState of the TP, enabled means running, disabled means not runningro Enumeration .1.3.6.1.4.1.2858.100.3.1.3 |
tpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.3.2 |
priCCIPAddressIP address of the primary Command Center for the Clarent ThroughPacket serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.3.2.1 |
ccPortNumberPort number of the Command Center for the Clarent ThroughPacket serverrw INTEGER .1.3.6.1.4.1.2858.100.3.2.2 |
secCCIPAddressIP address of the secondary Command Center for the Clarent ThroughPacket serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.3.2.3 |
tpConfigCommandUse this variable to issue commands to the Clarent ThroughPacket serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.3.2.4 |
tpRunTimeCtrlStart or stop the Clarent ThroughPacket serverrw Enumeration .1.3.6.1.4.1.2858.100.3.2.5 |
tpStatisticsManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.3.3 |
tpEnableStatsEnables statistics messages from Clarent ThroughPacket to the
Command Center.
Specify a value of 1 to enable statistics. The default value is 0 (zero),
which disables statistics.rw INTEGER .1.3.6.1.4.1.2858.100.3.3.1 |
tpStatsIntervalInterval, in minutes, between statistics messages from Clarent ThroughPacket
to the Command Centerrw INTEGER .1.3.6.1.4.1.2858.100.3.3.2 |
procManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.4 |
autoGWRestartEnable SNMP Agent to automatically restart the GWrw Enumeration .1.3.6.1.4.1.2858.100.4.1 |
autoCCRestartEnable SNMP Agent to automatically restart the GWrw Enumeration .1.3.6.1.4.1.2858.100.4.2 |
autoTPRestartEnable SNMP Agent to automatically restart the GWrw Enumeration .1.3.6.1.4.1.2858.100.4.3 |
autoDMRestartEnable SNMP Agent to automatically restart the DMrw Enumeration .1.3.6.1.4.1.2858.100.4.4 |
autoGKRestartEnable SNMP Agent to automatically restart the GKrw Enumeration .1.3.6.1.4.1.2858.100.4.5 |
autoCAMRestartEnable SNMP Agent to automatically restart the CAMrw Enumeration .1.3.6.1.4.1.2858.100.4.6 |
versionManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.5 |
versionTableA list of Version entries SEQUENCE OF VersionEntry .1.3.6.1.4.1.2858.100.5.1 |
versionEntryVersion Table Entry containing version component information VersionEntry .1.3.6.1.4.1.2858.100.5.1.1 |
componentName of Clarent Component that is versionedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.5.1.1.1 |
majorVersionMajor Release Version Numberro INTEGER .1.3.6.1.4.1.2858.100.5.1.1.2 |
minorVersionMinor Release Version Numberro INTEGER .1.3.6.1.4.1.2858.100.5.1.1.3 |
buildMajorVersionBuild Major Release Version Numberro INTEGER .1.3.6.1.4.1.2858.100.5.1.1.4 |
buildMinorVersionMajor Release Version Numberro INTEGER .1.3.6.1.4.1.2858.100.5.1.1.5 |
versionStringVersion in String Formatro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.5.1.1.6 |
cSysManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.6 |
cSysStatus OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.6.1 |
cSystemStatusCurrent status of the Clarent Network Element, if state is shutdownAllowed
it means that an enableShutdown down operation has been received. At this point
a startShutdown operation would start the shutdown process, if opError then the
csystemError will contain an error codero Enumeration .1.3.6.1.4.1.2858.100.6.1.1 |
cSystemErrorError Code reflected from systemro INTEGER .1.3.6.1.4.1.2858.100.6.1.2 |
cSysControl OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.6.2 |
cSysOperationUser can reboot the system by issuing an enableShutdown operation followed
by a startShutdown operation. When the system is enabled for shutdown
the clarent shutdowntrap is emitted, disableShutdown inhibits shutdown
until an enableShutdown is received. Default state is Shutdown disabledrw Enumeration .1.3.6.1.4.1.2858.100.6.2.1 |
cGatekeeper OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.20 |
cGkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.20.1 |
gkPortInUseCountNumber of ports currently in usero INTEGER .1.3.6.1.4.1.2858.100.20.1.1 |
gkOpStateClarent Gatekeeper operational statero Enumeration .1.3.6.1.4.1.2858.100.20.1.2 |
gkAltGKListAlternate gatekeeper listro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.1.3 |
gkLoadStateClarent Gatekeeper load statero Enumeration .1.3.6.1.4.1.2858.100.20.1.4 |
gkCCConnStateGatekeeper-to-Command Center connection statero Enumeration .1.3.6.1.4.1.2858.100.20.1.5 |
gkCallStatsTableList of call statistics for all call port types SEQUENCE OF GkCallStatsEntry .1.3.6.1.4.1.2858.100.20.1.6 |
gkCallStatsEntryEntry in the CallStatsTable for a given call port type GkCallStatsEntry .1.3.6.1.4.1.2858.100.20.1.6.1 |
gkCallPortTypeList of call port types.
Call port types are:
TOTAL, a call from any combination of call port types
H323H323, an H.323 gateway-to-H.323 gateway call
H323CLARENT, an H.323 gateway-to IP
H323NONE , an H.323 gateway call that was not successfully routed
CLARENT2H323, a Clarent Gateway-to-H.323 gateway call
CLARENT2CLARENT, a Clarent Gateway-Clarent Gateway call
CLARENT2CLARENT, a Clarent Gateway call that was not successfully routed.ro Enumeration .1.3.6.1.4.1.2858.100.20.1.6.1.1 |
gkNumberOfCallsNumber of call attempts for a given call port typero INTEGER .1.3.6.1.4.1.2858.100.20.1.6.1.2 |
gkCallTimeAmount of time, in seconds, for calls of a given call port typero INTEGER .1.3.6.1.4.1.2858.100.20.1.6.1.3 |
gkAverageHoldTimeAverage hold time for calls of a given call port typero INTEGER .1.3.6.1.4.1.2858.100.20.1.6.1.4 |
gkNumberOfConnectedCallsNumber of call completions for a given call port typero INTEGER .1.3.6.1.4.1.2858.100.20.1.6.1.5 |
cGkConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.20.2 |
gkNameClarent Gatekeeper namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.2.1 |
gkIPAddrIP address of Clarent Gatekeeperrw IpAddress .1.3.6.1.4.1.2858.100.20.2.2 |
gkExternalIPAddrIP address by which Clarent Gatekeeper is known to outside entitiesrw IpAddress .1.3.6.1.4.1.2858.100.20.2.3 |
gkCCUDPPortUDP port through which Clarent Command Center communicates
with Clarent Gatekeeperrw INTEGER .1.3.6.1.4.1.2858.100.20.2.4 |
gkPrimaryCCCIPAddrIP address of primary Command Centerrw IpAddress .1.3.6.1.4.1.2858.100.20.2.5 |
gkSecCCCIPAddrIP address of secondary Command Centerrw IpAddress .1.3.6.1.4.1.2858.100.20.2.6 |
gkServiceLpdFilePathLocation of telephone user interface, or Line Port Director (LPD) filerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.2.7 |
gkDebugFilePathPath to Clarent Gatekeeper trace configuration filerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.2.8 |
gkLogFileEnableEnable or disable file loggingrw Enumeration .1.3.6.1.4.1.2858.100.20.2.9 |
gkLogFileDirDirectory in which Clarent Gatekeeper saves log filesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.2.10 |
gkLogFileAppendStringCharacter string to append to Clarent Gatekeeper log file namesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.2.11 |
gkLogFileRolloverSizeSize, in kilobytes, to which Clarent Gatekeeper allows a
log file to grow before closing a log and starting anotherrw INTEGER .1.3.6.1.4.1.2858.100.20.2.12 |
gkLogFileMaxNumFilesMaximum number of log files Clarent Gatekeeper creates before
overwriting existing logsrw INTEGER .1.3.6.1.4.1.2858.100.20.2.13 |
gkSysLogEnableEnable or disable logging to a system logging (syslog) daemon
process running on another computerrw Enumeration .1.3.6.1.4.1.2858.100.20.2.14 |
gkSysLogIpAddrIP address of a system logging (syslog) daemon serverrw IpAddress .1.3.6.1.4.1.2858.100.20.2.15 |
gkGroupGroup to which Clarent Gatekeeper belongsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2858.100.20.2.16 |
gkPriorityPriority of this Clarent Gatekeeper in the alternate gatekeeper listrw INTEGER .1.3.6.1.4.1.2858.100.20.2.17 |
gkRasKeepAliveTimerAmount of time, in seconds, that an H.323 gateway must
register with Clarent Gatekeeper. Default = 25, miniumum = 0, maximum = 120.rw INTEGER .1.3.6.1.4.1.2858.100.20.2.18 |
gkCCCKeepAliveTimerHow often, in seconds, Clarent Gatekeeper checks its
connection with the Command Center. Default = 10, minimum = 5, maximum = 120rw INTEGER .1.3.6.1.4.1.2858.100.20.2.19 |
gkAdminStateCommand object to shut down Gatekeeper gracefully or forcefullyrw Enumeration .1.3.6.1.4.1.2858.100.20.2.20 |
gkGracefulShutdownPeriodNumber of minutes to wait before shutting down Clarent Gatekeeper gracefullyrw INTEGER .1.3.6.1.4.1.2858.100.20.2.21 |
cGkStatisticsManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.20.3 |
clarent-gktraps OBJECT IDENTIFIER .1.3.6.1.4.1.2858.100.20.100 |
gkIsDownClarent Gatekeeper is down TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.1 |
gkRestartFailedClarent Gatekeeper failed to restart TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.2 |
gkRestartedClarent Gatekeeper restarted successfully TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.3 |
gkNotRegisteredClarent Gatekeeper cannot register with the Command Center TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.4 |
gkOpStateChgClarent Gatekeeper changed operational state. Operational states are:
disabled (0), enabled (1). TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.5 |
gkLoadStateCriticalClarent Gatekeeper load state is critical. Load states are:
Minimal (0), Light (1), Medium (2), Heavy (3),
Dangerously Heavy (4), and Critical (5). TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.6 |
gkIsRejectingRasMsgClarent Gatekeeper started rejecting H.225 RAS messages.
Clarent::For Future Release TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.7 |
gkEndpointUnreachableEndpoint stopped sending keepalive messages to Clarent Gatekeeper TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.8 |
gkEndPointURQFailedEndpoint attempted to unregister but has active calls TRAP-TYPE .1.3.6.1.4.1.2858.100.20.100.0.9 |