Board-G703-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Board-G703-MIB.
24
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
IMPORTSThis table controls the parameter setting of the TTV G.703 board SEQUENCE OF G703Entry .1.3.6.1.4.1.562.3.1.32 |
g703EntryAn entry in the g703Table G703Entry .g703Table.1 |
g703SlotNumberThe number of the slot where the G.703 board is placed.ro SlotNumber .g703Table.1.1 |
g703PortNumberPort Numberro INTEGER .g703Table.1.2 |
g703OperationModeThe operation mode of the G.703 board
1=backwards compatible ('old'), 2=MkII mode.rw Enumeration .g703Table.1.3 |
g703ReedSolomonControls Reed-Solomon encoder/decoder (only in MkII operation mode).
for TX boards: Can only be enabled when packet len is 204rw Enumeration .g703Table.1.4 |
g703InterleaverControls interleaver/deinterleaver (only in MkII operation mode).
(For TX board: can only be enabled when pkt len =204, RS encoding on, Randomizer on.rw Enumeration .g703Table.1.5 |
g703TxClockModeThe clock mode of the board. Only for MkII TX
1=master, 2=slave (take clock from TSP board)rw Enumeration .g703Table.1.6 |
g703TxE3ErrorProtectTurns DVB-C Error protection on/off.
Only in Compatible mode with E3 TX and 204byte packet.rw Enumeration .g703Table.1.7 |
g703TxRandomizerRandomizer on/off. Can only be enabled in MkII mode,
TX, pkt len 204, RS encoding onrw Enumeration .g703Table.1.8 |
g703TxSignalLevelOutOutput signal level on G703rw Enumeration .g703Table.1.9 |
g703TxPdhRateOutput mode 1 = E3 (34Mbps) 2=DS3(45Mbps).rw Enumeration .g703Table.1.10 |
g703TxFramingPhysical Layer TX Framing mode.rw Enumeration .g703Table.1.11 |
g703TxOutputRateThis is the total output bitrate, in bits per secondrw INTEGER .g703Table.1.12 |
g703TxPacketLengthThis parameter is used to set the output packet length.
1 = 188 byte packets, 2 = 204 byte packets.rw Enumeration .g703Table.1.13 |
g703RxInputSensitivityInput signal sensitivity. 1 for normal signals, 2 for high sensitivity.rw Enumeration .g703Table.1.14 |
g703ReedSolomonStatusShows the status of the Reed-Solomon encoder (tx) or decoder (rx)ro Enumeration .g703Table.1.15 |
g703RandomizerStatusShows the status of the Randomizer(tx) or De-Randomizer(rx)ro Enumeration .g703Table.1.16 |
g703InterleaverStatusShows the status of the Interleaver(tx) or De-Interleaver(rx)ro Enumeration .g703Table.1.17 |
g703RxInPacketLengthInput packet length.ro Enumeration .g703Table.1.18 |
g703RxInputRateInput bit ratero Uint32 .g703Table.1.19 |
g703RxPdhStatusShows the input PDH rate.ro Enumeration .g703Table.1.20 |
g703RxFramingStatusShows the framing status of the input stream.ro Enumeration .g703Table.1.21 |
g703AlarmStatusThe alarm information from the G703 board.
Bit No. Alarm
2 G703 No Sync
3 G703 Loss of Signal
4 G703 Parity Errors
5 G703 Reed-Solomon Errors
6 G703 Out of Regulation
7 G703 MPEG Rate too highro Uint32 .g703Table.1.998 |