BPMEMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BPMEMIB.
39
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
39 total| Object Name |
|---|
birdtech OBJECT IDENTIFIER .1.3.6.1.4.1.21581 |
RFC1155-SMI Unknown .1.3.6.1.4.1.21581 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1 |
bpme OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.0 |
generalAlarmTrapThis trap signals that the general Alarm on the
BPME has been triggered or has been cleared. TRAP-TYPE .1.3.6.1.4.1.21581.1.1.0.0.1 |
highPwrAlarmTrapThis trap signals that the high power alarm on the
BPME has been triggered or has been cleared. TRAP-TYPE .1.3.6.1.4.1.21581.1.1.0.0.2 |
lowPwrAlarmTrapThis trap signals that the low power alarm on the
BPME has been triggered or has been cleared. TRAP-TYPE .1.3.6.1.4.1.21581.1.1.0.0.3 |
vswrPwrAlarmTrapThis trap signals that the vswr power alarm on the
BPME has been triggered or has been cleared. TRAP-TYPE .1.3.6.1.4.1.21581.1.1.0.0.4 |
measurement OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.1 |
power OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.1.1 |
fwdPwrmWForward Power in mWro INTEGER .1.3.6.1.4.1.21581.1.1.1.1.1 |
fwdPwrdBmForward Power in dBmro INTEGER .1.3.6.1.4.1.21581.1.1.1.1.2 |
refPwrmWReflected Power in mWro INTEGER .1.3.6.1.4.1.21581.1.1.1.1.3 |
refPwrdBmReflected Power in dBmro INTEGER .1.3.6.1.4.1.21581.1.1.1.1.4 |
calcMeas OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.1.2 |
VSWRx10VSWR value X10 (ie. vswr = ('VSWRx10' / 10):1)ro INTEGER .1.3.6.1.4.1.21581.1.1.1.2.1 |
retLossReturn loss in dBro INTEGER(-40..0) .1.3.6.1.4.1.21581.1.1.1.2.2 |
alarms OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.2 |
generalAlarmTells if any bpme alarms are present
1 = alarm present
2 = alarm not presentro INTEGER .1.3.6.1.4.1.21581.1.1.2.1 |
powerAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.2.2 |
highPwrAlarmTells if high forward power bpme alarm is present
1 = alarm present
0 = alarm not presentro INTEGER .1.3.6.1.4.1.21581.1.1.2.2.1 |
lowPwrAlarmTells if low forward power bpme alarm is present
1 = alarm present
0 = alarm not presentro INTEGER .1.3.6.1.4.1.21581.1.1.2.2.2 |
calcAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.2.3 |
vswrAlarmTells if vswr bpme alarm is present
1 = alarm present
0 = alarm not presentro INTEGER .1.3.6.1.4.1.21581.1.1.2.3.1 |
messageStringMessage giving more detailed information on alarms.ro DisplayString .1.3.6.1.4.1.21581.1.1.2.4 |
settings OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.3 |
highPwrTripHigh forward power trip point in mWro INTEGER .1.3.6.1.4.1.21581.1.1.3.1 |
highPwrAlarmEnTells if High power alarm is enabled
1 = enabled
0 = not enabledro INTEGER .1.3.6.1.4.1.21581.1.1.3.2 |
lowPwrTripLow forward power trip point in mWro INTEGER .1.3.6.1.4.1.21581.1.1.3.3 |
lowPwrAlarmEnTells if Low power alarm is enabled
1 = enabled
0 = not enabledro INTEGER .1.3.6.1.4.1.21581.1.1.3.4 |
vswrTripX10VSWR trip point X10
(ie. vswr = ('vswrTripx10' / 10):1)ro INTEGER .1.3.6.1.4.1.21581.1.1.3.5 |
vswrAlarmOnZeroTells if unit will report a VSWR alarm on zero (or very low)
power.
1 = High VSWR will cause an alarm at low power
0 = High VSWR will not cause an alarm at low powerro INTEGER .1.3.6.1.4.1.21581.1.1.3.6 |
alarmsLatchTells if alarms on the unit latch until manually cleared.
1 = Alarms latch until manually cleared
0 = Alarms don't latch and will clear when alarm
condition goes away.ro INTEGER .1.3.6.1.4.1.21581.1.1.3.7 |
masterAlarmEnTells if master alarm is enabled (if disabled none of the
alarms are emabled
1 = Low power, High power, and VSWR alarms are active
if individually enabled.
0 = No alarms are enabled.ro INTEGER .1.3.6.1.4.1.21581.1.1.3.8 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.4 |
firmware OBJECT IDENTIFIER .1.3.6.1.4.1.21581.1.1.4.1 |
bpmeFirmwareFirmware information for BPMEro DisplayString .1.3.6.1.4.1.21581.1.1.4.1.1 |
xportFirmwareFirmware information for xportro DisplayString .1.3.6.1.4.1.21581.1.1.4.1.2 |