BLUEARC-SERVER-MIB
AI MIB Summary
The BLUEARC-SERVER-MIB provides SNMP-based monitoring and management capabilities for BlueArc storage server hardware, exposing critical performance metrics such as disk array status, controller health, I/O throughput, and system resource utilization.
The MIB module for monitoring a BlueArc Server.
Main OID:
blueArcServer.1.3.6.1.4.1.11096.6.1
1256
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
1256 total| Object Name |
|---|
blueArc OBJECT IDENTIFIER .1.3.6.1.4.1.11096 |
blueArcPrivate OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6 |
blueArcServerThe MIB module for monitoring a BlueArc Server. MODULE-IDENTITY .1.3.6.1.4.1.11096.6.1 |
blueArcServerObjs OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1 |
sys OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1 |
powerUnits OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.1 |
puConfigNumberThe number of power units (regardless of their current state)
which may be present on this system.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.1 |
puConfigTableA table of configuration information relevant to each power
unit which may be present on this system.
The number of entries in this table is given by the value of
puConfigNumber.
This object is obsolete. Power units must be indexed by
IP address.obsolete SEQUENCE OF PuConfigEntry .1.3.6.1.4.1.11096.6.1.1.1.1.2 |
puConfigEntryConfiguration information for a power unit which may be
present on this system.
This object is obsolete. Power units must be indexed by
IP address.obsolete PuConfigEntry .1.3.6.1.4.1.11096.6.1.1.1.1.2.1 |
puConfigIndexA unique value for each power unit which may be present on
this system.
Its value ranges between 1 and the value of puConfigNumber.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.2.1.1 |
puConfigShutdownEnabledIndicates whether the power unit is to control the shutdown
of the system when a power outage is detected.
enabled(1) - the power unit will control the shutdown.
disabled(2) - the power unit will NOT control the shutdown.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.2.1.2 |
puConfigShutdownIntervalThis variable is used in conjunction with
puConfigShutdownRemainingLife such that when either
condition is met a controlled shutdown will take place.
puConfigShutdownInterval specifies the interval after
which a controlled shutdown should take place in the event
of a power outage.
remainingLife(1) - indicates that the shutdown is based
on the remaining battery life only and NOT
the duration of the power outage.
The variable puConfigShutdownRemainingLife
determines how the shutdown is controlled.
immediately(2) - the shutdown should take place as soon as
the power outage is detected. The variable
puConfigRemainingLife is irrelevant in this
case.
oneMinute(3),
twoMinutes(4),
threeMinutes(5), - the interval after which a controlled
fiveMinutes(6), shutdown should take place in the event of
tenMinutes(7) a power outage.
NOTE: the variable puConfigShutdownEnabled must be enabled(1),
for this variable to have any effect in determining
when the controlled shutdown is performed.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.2.1.3 |
puConfigShutdownRemainingLifeSpecifies the number of minutes of battery life which when
depleted will cause a controlled shutdown of the system.
NOTE: the variable puConfigShutdownEnabled must be enabled(1),
for this variable to have any effect in determining
when the controlled shutdown is performed.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.2.1.4 |
puConfigCommsOKIndicates whether the system is currently communicating with
the power unit.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.2.1.5 |
puConfigCommsEverOKIndicates whether the system has ever communicated
with the power unit.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.2.1.6 |
puStatusNumberThe number of power units from which status information
can be gathered. Status information is only available for
power units that the system is able to communicate with.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.3 |
puStatusTableA table containing the status of each power unit the system
is communicating with.
The number of entries in this table is given by the value of
puStatusNumber.
This object is obsolete. Power units must be indexed by
IP address.obsolete SEQUENCE OF PuStatusEntry .1.3.6.1.4.1.11096.6.1.1.1.1.4 |
puStatusEntryStatus information for each power unit the system is
communicating with.
This object is obsolete. Power units must be indexed by
IP address.obsolete PuStatusEntry .1.3.6.1.4.1.11096.6.1.1.1.1.4.1 |
puStatusIndexThe power unit from which the status information has been
gathered. The power unit identified by a particular value
of this index is the same power unit as identified by the
same value of puConfigIndex.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.1 |
puStatusModelThe model of the power unit as declared by the
manufacturer.
This object is obsolete. Power units must be indexed by
IP address.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.2 |
puStatusSerialNumberThe serial number of the power unit as declared by the
manufacturer.
This object is obsolete. Power units must be indexed by
IP address.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.3 |
puStatusManufactureDateThe date of manufacture of the power unit as declared by the
manufacturer in their chosen format.
This object is obsolete. Power units must be indexed by
IP address.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.4 |
puStatusBatteryReplaceDateThe last date a battery was replaced within this the power unit
in manufacturers format.
This object is obsolete. Power units must be indexed by
IP address.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.5 |
puStatusUpperTransferVoltageThe upper battery transfer voltage in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.6 |
puStatusLowerTransferVoltageThe lower battery transfer voltage in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.7 |
puStatusSensitivityThe sensitivity of the power unit.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.8 |
puStatusLowBatteryIntervalThe length of time between the power unit warning of a low
battery and turning off in minutes.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.9 |
puStatusAlarmSettingThe audible alarm setting for the power unit.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.10 |
puStatusCalibratingIndicates whether the power unit is calibrating or not.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.11 |
puStatusSleepingIndicates whether the power unit is sleeping or not.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.12 |
puStatusOnlineIndicates whether the power unit is on or off line.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.13 |
puStatusOnBatteryIndicates whether the power unit is operating on
the battery or mains.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.14 |
puStatusBatteryAlmostUsedUpIndicates whether the power units battery is almost
used up.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.15 |
puStatusChangeBatteryIndicates whether the power units battery should be
changed.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.4.1.16 |
puStatsNumberThe number of power units from which statistics
can be gathered. Statistics are only available for
power units that the system is able to communicate with.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.5 |
puStatsTableA table containing statistics for each power unit the system
is communicating with.
The number of entries in this table is given by the value of
puStatsNumber.
This object is obsolete. Power units must be indexed by
IP address.obsolete SEQUENCE OF PuStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.1.6 |
puStatsEntryStatistics for each power unit the system is communicating
with.
This object is obsolete. Power units must be indexed by
IP address.obsolete PuStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.1.6.1 |
puStatsIndexThe power unit from which the statistics have been gathered.
The power unit identified by a particular value of this
index is the same power unit as identified by the same value
of puConfigurationIndex.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.1 |
puStatsBatteryChargeThe percentage by which the battery is charged.
This object is obsolete. Power units must be indexed by
IP address.roobsolete INTEGER .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.2 |
puStatsLoadThe percentage of the rated load in Watts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete INTEGER .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.3 |
puStatsFrequencyThe frequency of the AC mains in Hertz.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.4 |
puStatsLineVoltageThe AC mains voltage entering the power unit in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.5 |
puStatsOutputVoltageThe output voltage of the power unit in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.6 |
puStatsBatteryVoltageThe battery voltage in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.7 |
puStatsTemperatureCThe temperature inside the power unit in degrees Celsius.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.8 |
puStatsTemperatureFThe temperature inside the power unit in degrees Fahrenheit.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.9 |
puStatsLineMininumVoltageThe minimum line voltage in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.10 |
puStatsLineMaximumVoltageThe maximum line voltage in Volts.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.11 |
puStatsRemainingRunTimeThe remaining runtime of the battery based on the
obsolete load in minutes.
This object is obsolete. Power units must be indexed by
IP address.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.6.1.12 |
puConfigurationCountThe number of power units (regardless of their current state)
which may be present on this system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.7 |
puConfigurationTableA table of configuration information relevant to each power
unit which may be present on this system.
The number of entries in this table is given by the value of
puConfigurationCount. SEQUENCE OF PuConfigurationEntry .1.3.6.1.4.1.11096.6.1.1.1.1.8 |
puConfigurationEntryConfiguration information for a power unit which may be
present on this system. PuConfigurationEntry .1.3.6.1.4.1.11096.6.1.1.1.1.8.1 |
puConfigurationIndexAn IP address for each power unit which may be present on
this system.
0.0.0.0 is given for a serial-attached UPS.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.1 |
puConfigurationUserNameThe UPS management card's admin user name, used with the
authentication phrase for authenticating status updates
from the UPS. Empty if authentication is disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.2 |
puConfigurationMonitoringEnabledIndicates whether monitoring is enabled on the UPS.
If monitoring is enabled, then the power unit is to
control the shutdown of the system when a power outage is
detected.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.3 |
puConfigurationShutdownOnBatteryIf the value is not -1, then the system will be shut down
after running on battery for the specified time in minutes.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.4 |
puConfigurationShutdownOnRuntimeIf the value is not -1, then shutdown will occur when the
estimated remaining runtime falls below the specified value
in minutes.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.5 |
puConfigurationShutdownOnLowBatteryIf the value is not -1, then the system will shut down
when UPS reports a low battery, with a delay of the
specified number of minutes.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.6 |
puConfigurationOnBatteryToleranceThe length of time, in seconds, for which the UPS must be
on battery before the system will act on it, no matter what
the shutdown settings are.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.7 |
puConfigurationCommsOKIndicates whether the system is currently communicating with
the power unit.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.8 |
puConfigurationCommsEverOKIndicates whether the system has ever communicated
with the power unit.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.8.1.9 |
puCurrentStatusCountThe number of power units from which status information
can be gathered. Status information is only available for
power units that the system is able to communicate with.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.9 |
puCurrentStatusTableA table containing the status of each power unit the system
is communicating with.
The number of entries in this table is given by the value of
puCurrentStatusCount. SEQUENCE OF PuCurrentStatusEntry .1.3.6.1.4.1.11096.6.1.1.1.1.10 |
puCurrentStatusEntryStatus information for each power unit the system is
communicating with. PuCurrentStatusEntry .1.3.6.1.4.1.11096.6.1.1.1.1.10.1 |
puCurrentStatusIndexThe power unit from which the status information has been
gathered. The power unit identified by a particular IP
address is the same power unit as identified by the
same value of puConfigurationIndex.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.1 |
puCurrentStatusModelThe model of the power unit as declared by the
manufacturer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.2 |
puCurrentStatusSerialNumberThe serial number of the power unit as declared by the
manufacturer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.3 |
puCurrentStatusManufactureDateThe date of manufacture of the power unit as declared by the
manufacturer in their chosen format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.4 |
puCurrentStatusBatteryReplacedDateThe last date a battery was replaced within this the power unit
in manufacturers format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.5 |
puCurrentStatusUpperTransferVoltageThe upper battery transfer voltage in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.6 |
puCurrentStatusLowerTransferVoltageThe lower battery transfer voltage in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.7 |
puCurrentStatusSensitivityThe sensitivity of the power unit.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.8 |
puCurrentStatusLowBatteryIntervalThe length of time between the power unit warning of a low
battery and turning off in minutes.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.9 |
puCurrentStatusAlarmSettingThe audible alarm setting for the power unit.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.10 |
puCurrentStatusCalibratingIndicates whether the power unit is calibrating or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.11 |
puCurrentStatusSleepingIndicates whether the power unit is sleeping or not.
This object is only applicable to a Symmetra UPS;
in all other cases, it will be notDefined(1).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.12 |
puCurrentStatusSmartTrimIndicates whether SmartTrim is enabled or not.
This object is not applicable to a Symmetra UPS;
in this case, it will be notDefined(1).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.13 |
puCurrentStatusSmartBoostIndicates whether SmartBoost is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.14 |
puCurrentStatusOnlineIndicates whether the power unit is on or off line.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.15 |
puCurrentStatusOnBatteryIndicates whether the power unit is operating on
the battery or mains.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.16 |
puCurrentStatusOverloadIndicates whether the UPS is overloaded.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.17 |
puCurrentStatusBatteryAlmostUsedUpIndicates whether the power units battery is almost
used up.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.18 |
puCurrentStatusChangeBatteryIndicates whether the power units battery should be
changed.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.1.10.1.19 |
puStatisticsCountThe number of power units from which statistics
can be gathered. Statistics are only available for
power units that the system is able to communicate with.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.11 |
puStatisticsTableA table containing statistics for each power unit the system
is communicating with.
The number of entries in this table is given by the value of
puStatisticsCount. SEQUENCE OF PuStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.1.1.12 |
puStatisticsEntryStatistics for each power unit the system is communicating
with. PuStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.1.1.12.1 |
puStatisticsIndexThe power unit from which the statistics have been gathered.
The power unit identified by a particular value of this
index is the same power unit as identified by the same value
of puConfigurationIndex.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.1 |
puStatisticsBatteryChargeThe percentage by which the battery is charged.ro INTEGER .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.2 |
puStatisticsLoadThe percentage of the rated load in Watts.ro INTEGER .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.3 |
puStatisticsFrequencyThe frequency of the AC mains in Hertz.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.4 |
puStatisticsLineVoltageThe AC mains voltage entering the power unit in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.5 |
puStatisticsOutputVoltageThe output voltage of the power unit in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.6 |
puStatisticsBatteryVoltageThe battery voltage in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.7 |
puStatisticsTemperatureCThe temperature inside the power unit in degrees Celsius.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.8 |
puStatisticsTemperatureFThe temperature inside the power unit in degrees Fahrenheit.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.9 |
puStatisticsLineMininumVoltageThe minimum line voltage in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.10 |
puStatisticsLineMaximumVoltageThe maximum line voltage in Volts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.11 |
puStatisticsRemainingRunTimeThe remaining runtime of the battery based on the
obsolete load in minutes.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.1.12.1.12 |
server OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2 |
environment OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.1 |
sensorNumberThe number of sensors (regardless of their current state)
which are present within silicon server unit.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.1 |
sensorTableA table containing information gathered by sensors located
within the silicon server unit. Each sensor takes a
measurement of both fan speed and temperature.
The number of entries in this table is given by the value of
sensorNumber.obsolete SEQUENCE OF SensorEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.2 |
sensorEntryInformation collected from each sensor located within
the silicon server unit.obsolete SensorEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1 |
sensorIndexA unique value for each sensor within the silicon server unit.
Its value ranges between 1 and the value of sensorNumber.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.1 |
sensorSpeedStatusIndicates whether the speed measurement is within the
expected range.
ok(1) - the reading is within the expected range.
warning(2) - the reading is outside of the expected range,
but not severe.
severe(3) - the sensor unit should be replaced.
failed(4) - the sensor unit has failed. The measured
speed is invalid.
unknown(5) - the speed status could not be determined.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.2 |
sensorSpeedReadingA measurement of the fan speed taken by the sensor in rpm.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.3 |
sensorTempStatusIndicates whether the temperature measurement is within the
expected range.
ok(1) - the reading is within the expected range.
warning(2) - the reading is outside of the expected range,
but not severe.
severe(3) - the sensor unit should be replaced.
failed(4) - the sensor unit has failed. The measured
temperature is invalid.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.4 |
sensorTempCReadingA measurement of the temperature taken by the sensor in degrees
Celsius.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.5 |
sensorTempFReadingA measurement of the temperature taken by the sensor in degrees
Fahrenheit.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.6 |
psuOneStatusThe status of power supply unit 1 within the silicon server.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.3 |
psuTwoStatusThe status of power supply unit 2 within the silicon server.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.4 |
opsPerSecondThe number of operations per second.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.5 |
fileSystemLoadClientThe percentage of maximum load on file system resources
due to client usage, averaged over the last 10 seconds.
This represents the load on FSA.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.6 |
fileSystemLoadSystemThe percentage of maximum load on file system resources
due to system usage, averaged over the last 10 seconds.
This represents the load on FSB.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.7 |
temperatureSensorNumberThe number of temperature sensors (regardless of their
current state) present in all silicon server units
in the cluster.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.8 |
temperatureSensorTableA table containing information gathered by temperature
sensors located in all silicon server units in the
cluster.
The number of entries in this table is given by the value of
temperatureSensorNumber. SEQUENCE OF TemperatureSensorEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.9 |
temperatureSensorEntryInformation collected from each temperature sensor located
in the silicon server unit. TemperatureSensorEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1 |
temperatureSensorClusterNodeThe ID of the Cluster Node in which the fan
is located.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.1 |
temperatureSensorIndexA unique value for each temperature sensor on a
cluster node.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.2 |
temperatureSensorStatusIndicates whether the temperature measurement is within the
expected range.
ok(1) - the reading is within the expected range.
tempWarning(2) - the reading is outside of the expected
range, but not severe.
tempSevere(3) - The reading is severely outside the
expected range.
tempSensoreFailed(4) - the sensor unit has failed. The measured
temperature is invalid
tempSensorWarning(5) - the sensor unit is in a warning condition.
unknown(6) - the status of the sensor could not be
determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.3 |
temperatureSensorCReadingA measurement of the temperature taken by the sensor in degrees
Celsius.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.4 |
temperatureSensorFReadingA measurement of the temperature taken by the sensor in degrees
Fahrenheit.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.5 |
fanNumberThe number of fans (regardless of their current state) present
in all silicon server units in the cluster.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.10 |
fanTableA table containing information about the fans located in all
silicon server units in the cluster. SEQUENCE OF FanEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.11 |
fanEntryInformation about each fan located in all silicon server
units in the cluster. FanEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1 |
fanClusterNodeThe ID of the Cluster Node in which the fan
is located.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.1 |
fanIndexA unique value for each fan on a
cluster node.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.2 |
fanFittedStatusIndicates the 'fitted' status of the fan.
ok(1) - the fan is fitted correctly.
okIdWrong(2) - the fan is fitted correctly, but the
ID is wrong.
notFitted(3) - the fan is not fitted.
unknown(4) - the status could not be determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.3 |
fanSpeedStatusIndicates the 'speed' status of the fan.
ok(1) - the fan speed is ok.
warning(2) - the fan speed is at a warning level.
severe(3) - the fan speed is at a severe level.
unknown(4) - the fan speed status could not be
determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.4 |
fanSpeedThe speed of the fan.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.5 |
psuNumberThe number of psus (regardless of their current state) present
in all silicon server units in the cluster.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.12 |
psuTableA table containing information about the psus located in the
silicon server unit. SEQUENCE OF PsuEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.13 |
psuEntryInformation about each psu. PsuEntry .1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1 |
psuClusterNodeThe ID of the Cluster Node in which the psu
is located.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.1 |
psuIndexA unique value for each psu on a
cluster node.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.2 |
psuStatusIndicates the status of the psu.
ok(1) - the psu is ok.
failed(2) - the psu has failed.
notFitted(3) - the psu is not fitted.
unknown(4) - the status could not be determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.3 |
locale OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.2 |
serverDateThe local date reported by the server in the form
YYYY-MM-DD
Where YYYY is the year.
MM is the number of the month (01-12).
DD is the day of the month.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.2.1 |
serverTimeThe local time reported by the server in the form
HH:MM:SS (UTC+/-hh:mm)
Where HH is the hour (using 24 hour clock).
MM is the minute.
SS is the second.
The remainder of the date indicates the number
of hours (hh) and minutes (mm) east of UTC
the local time has been adjusted by.
NOTE: a negative value for the UTC offset indicates
a time zone which is west of UTC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.2.2 |
utcOffsetThe local time zone offset setting for the server
expressed as a number of minutes.
NOTE: a negative value indicates a time zone west
of UTC.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.2.3 |
daylightSavingsIndicates whether daylight savings are in effect.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.2.4 |
ntpServerNumberThe number of NTP servers which have been configured
to assist in synchronization of this silicon servers
time.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.2.5 |
ntpServerTableA table containing information about each NTP server.
The number of entries in this table is given by the value of
ntpServerNumber. SEQUENCE OF NtpServerEntry .1.3.6.1.4.1.11096.6.1.1.1.2.2.6 |
ntpServerEntryInformation about each configured NTP server. NtpServerEntry .1.3.6.1.4.1.11096.6.1.1.1.2.2.6.1 |
ntpServerHostThe hostname or IP address of the NTP server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.2.6.1.1 |
failover OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.3 |
failoverConfigStatusIndicates whether failover is configured for the silicon server.
This object is obsolete.
Failover has been replaced by clustering.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.3.1 |
failoverPrimaryNameThe primary management name or a zero length string if
failover is not configured for this system.
This object is obsolete.
Failover has been replaced by clustering.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.3.2 |
failoverSystemNameThe system management name or a zero length string if
failover is not configured for this system.
This object is obsolete.
Failover has been replaced by clustering.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.3.3 |
failoverSecondaryNameThe secondary management name or a zero length string if
failover is not configured for this system.
This object is obsolete.
Failover has been replaced by clustering.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.3.4 |
failoverPrimaryIpAddrThe primary IP address or 0.0.0.0 if
failover is not configured for this system.
This object is obsolete.
Failover has been replaced by clustering.roobsolete IpAddress .1.3.6.1.4.1.11096.6.1.1.1.2.3.5 |
failoverSystemIpAddrThe system IP address or 0.0.0.0 if
failover is not configured for this system.
This object is obsolete.
Failover has been replaced by clustering.roobsolete IpAddress .1.3.6.1.4.1.11096.6.1.1.1.2.3.6 |
failoverSecondaryIpAddrThe secondary IP address or 0.0.0.0 if
failover is not configured for this system.
This object is obsolete.
Failover has been replaced by clustering.roobsolete IpAddress .1.3.6.1.4.1.11096.6.1.1.1.2.3.7 |
failoverPrimaryStatusThe status of the primary.
This object is obsolete.
Failover has been replaced by clustering.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.3.8 |
failoverSecondaryStatusThe status of the secondary.
This object is obsolete.
Failover has been replaced by clustering.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.3.9 |
cache OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.4 |
sectorCache OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.4.1 |
sectorCacheModeThe mode the disk sector cache is currently operating in.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.4.1.1 |
sectorCacheDirtyPageWtmkThe current setting of the percentage dirty page watermark
which is used in determining when to flush the disk sector
cache.
This object is now obsolete.roobsolete INTEGER .1.3.6.1.4.1.11096.6.1.1.1.2.4.1.2 |
sectorCacheDirtyPageTimeoutThe current setting of the percentage dirty page timeout
(specified in seconds) which is used in determining when
to flush the disk sector cache.ro INTEGER .1.3.6.1.4.1.11096.6.1.1.1.2.4.1.3 |
fileSysCache OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.4.2 |
fileSysCacheModeThe mode the file system cache is currently operating in.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.4.2.1 |
fileSysTransactionLoggingIndicates whether file system transaction logging is enabled
or not.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.4.2.2 |
fileSysCacheTimeoutThe file system cache timeout in seconds.
This object is obsolete.roobsolete INTEGER .1.3.6.1.4.1.11096.6.1.1.1.2.4.2.3 |
fileSysUpdateLastAccessIndicates whether the file system should update the last
access time(s) on files or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.4.2.4 |
clustering OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.5 |
clusterNameThe cluster management name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.5.1 |
clusterUuidA unique identification number for the cluster.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.5.2 |
clusterConfigThe configuration of the cluster:
1 - single standalone node
2 - active / standby pair
3 - active / active cluster
4 - the configuration could not be determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.5.3 |
clusterQuorumDeviceNameThe quorum device management name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.5.4 |
clusterQuorumDeviceIpAddrThe quorum device IP address, or 0.0.0.0 if no quorum device
is present.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.1.2.5.5 |
clusterQuorumDeviceOwnedByPNodeThe identification number of the physical node which
owns this quorum device. A value of -1 indicates that
this cannot be determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.5.6 |
clusterQuorumDeviceStatusThe status of the quorum device:
0 - unknown
1 - unconfigured
2 - off line
3 - owned
4 - configured
5 - granted
6 - cluster node being queried is not up
7 - quorum device does not have the correct
UUID for the clusterro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.5.7 |
clusterPNodeNumberThe number of physical nodes in the cluster. A value of -1
indicates that this cannot be determined.
This object is now obsolete, and has been replaced with
clusterNodeNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.5.8 |
clusterPNodeTableInformation about each physical node in the cluster.
The number of entries in this table is given by
clusterPNodeNumber.
This object is now obsolete, and has been replaced with
clusterNodeTable. SEQUENCE OF ClusterPNodeEntry .1.3.6.1.4.1.11096.6.1.1.1.2.5.9 |
clusterPNodeEntryInformation about each physical node.
This object is now obsolete, and has been replaced with
clusterNodeEntry. ClusterPNodeEntry .1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1 |
clusterPNodeIdThe identification number of the physical node. A value of -1
indicates that this cannot be determined.
This object is now obsolete, and has been replaced with
clusterNodeId.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.1 |
clusterPNodeNameThe management name of the physical node.
This object is now obsolete, and has been replaced with
clusterNodeName.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.2 |
clusterPNodeIpAddrThe IP address of the physical node. A value of 0.0.0.0 indicates
that this cannot be determined.
This object is now obsolete, and has been replaced with
clusterNodeIpAddr.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.3 |
clusterPNodeStatusThe status of the physical node:
1 - unknown
2 - up
3 - not up
4 - on line
5 - dead
6 - dormant
This object is now obsolete, and has been replaced with
clusterNodeStatus.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.4 |
clusterVNodeNumberThe number of virtual nodes in the cluster. A value of -1
indicates that this cannot be determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.5.10 |
clusterVNodeTableInformation about each virtual node in the cluster.
The number of entries in this table is given by
clusterVNodeNumber SEQUENCE OF ClusterVNodeEntry .1.3.6.1.4.1.11096.6.1.1.1.2.5.11 |
clusterVNodeEntryInformation about each virtual node in the cluster. ClusterVNodeEntry .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1 |
clusterVNodeIdThe identification number of the virtual node. A value of -1
indicates that this cannot be determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.1 |
clusterVNodeNameThe management name of the virtual node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.2 |
clusterVNodeIpAddrThe IP address of the virtual node. A value of 0.0.0.0 indicates
that this cannot be determined.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.3 |
clusterVNodeStatusThe status of the virtual node:
1 - unknown
2 - on line
3 - off linero Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.4 |
clusterVNodeAdminWhether the virtual node is the administrative virtual node:
0 - a service node (i.e. not the administrative virtual node)
1 - the administrative virtual node
2 - cannot be determinedro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.5 |
clusterVNodeHostedByThe identification number of the physical node hosting this
virtual node. A value of -1 indicates that this cannot be
determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.6 |
serialNumbers OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.2.6 |
serialNumberTableSerial numbers for server components. SEQUENCE OF SerialNumberEntry .1.3.6.1.4.1.11096.6.1.1.1.2.6.1 |
serialNumberEntrySerial number for a component. SerialNumberEntry .1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1 |
componentTypeThe type of component:
1 - a chassis
2 - a blade, such as NIM2
3 - a power supply unitro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.1 |
subComponentTypeThe sub-type of component.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.2 |
clusterNodeThe identification number of the cluster node hosting this
component. A value of -1 indicates that this cannot be
determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.3 |
serialNumberThe serial number of the component.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.4 |
storage OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3 |
racks OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.1 |
rackNumberThe number of racks (regardless of their current state)
which are present in this system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.1.1 |
rackTableA table containing information about each rack in
this system.
The number of entries in this table is given by the value of
rackNumber.
This table is now obsolete.obsolete SEQUENCE OF RackEntry .1.3.6.1.4.1.11096.6.1.1.1.3.1.2 |
rackEntryStatus information about each rack in the system.
This table is now obsolete.obsolete RackEntry .1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1 |
rackIndexA unique value for each rack present in this system.
Its value ranges between 1 and the value of rackNumber.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.1 |
rackStatusIndicates the status of the rack.
ok(1) - the RAID monitoring software is
communicating with the rack.
storageFailed(2) - the RAID controller associated with
this rack has failed.
loopFailed(3) - the fibre channel loop has failed.
otherFailure(4) - the system is unable to communicate with the
rack, it may be booting.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.2 |
rackNumberOfEnclosuresThe number of storage enclosures which are normally accessible
by this rack.
NOTE: If rackStatus is not ok, the value of this variable
will be 0.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.3 |
rackNumberOfPhysicalDrivesThe number of physical drives which are normally accessible
by this rack.
NOTE: If rackStatus is not ok, the value of this variable
will be 0.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.4 |
raid OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.2 |
controllers OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.2.1 |
raidControllerTableA table containing general information about RAID controller(s)
present in each rack within the system.
A rack may contain dual controllers for redundancy purposes.
This (if present) will be indicated by the secondaryStatus field.
The number of entries in the table is given by the value of
rackNumber provided that the system can communicate with the rack.
This table is now obsolete.obsolete SEQUENCE OF RaidControllerEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1 |
raidControllerEntryGeneral information about the RAID controller(s) in a rack.
This table is now obsolete.obsolete RaidControllerEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1 |
raidControllerRackIndexThe rack in which the RAID controller(s) are located.
The controller(s) identified by a particular value
of this index is located within the rack identified by the
same value of rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.1 |
raidControllerWWNThe world wide name identifying the RAID controller(s).
NOTE: If the world wide name cannot be obtained this value will
be a zero length string.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.2 |
raidControllerPrimaryStatusThe status of primary RAID controller.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.3 |
raidControllerSecondaryStatusThe status of secondary RAID controller.
NOTE: A status of notPresent(3) indicates that there is only
one RAID controller within this rack.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.4 |
raidControllerManufacturerThe manufacturer of the RAID controller(s).
NOTE: If the manufacturer cannot be obtained this value will
be a zero length string.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.5 |
raidControllerModelThe model of the RAID controller(s).
NOTE: If the model cannot be obtained this value will
be a zero length string.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.6 |
raidControllerCacheSizeThe size of the RAID controller(s) cache in bytes.
NOTE: If the cache size cannot be obtained this value will
be a 0.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.7 |
raidControllerConfigTableA table containing configuration information about
the RAID controller present in each rack within
the system. This information is the same for a
RAID controller which has redundancy.
The number of entries in the table is given by the value of
rackNumber provided that the system can communicate with the rack.
This object is now obsolete.obsolete SEQUENCE OF RaidControllerConfigEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2 |
raidControllerConfigEntryConfiguration information about the RAID controller in a rack.
This object is now obsolete.obsolete RaidControllerConfigEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1 |
raidControllerConfigRackIndexThe rack in which the RAID controller is located.
The controller identified by a particular value
of this index is located within the rack identified by the
same value of rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.1 |
raidControllerConfigDRAMSizeThe size of the DRAM present in the RAID controller
in bytes.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.2 |
raidControllerConfigFlashSizeThe size of flash memory present in the RAID controller
in bytes.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.3 |
raidControllerConfigNVRSizeThe size of non volatile memory present in the RAID controller
in bytes.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.4 |
raidControllerConfigClockSpeedThe clock speed of the memory in the RAID controller
in nanoseconds.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.5 |
raidControllerConfigMemAccessThe access time of the memory in the RAID controller
in nanoseconds.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.6 |
raidControllerConfigMemCycleThe cycle time of the memory in the RAID controller
in nanoseconds.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.7 |
raidControllerConfigPhysicalSectorSizeThe physical sector size supported by the RAID controller
in bytes.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.8 |
raidControllerConfigLogicalSectorSizeThe logical sector size supported by the RAID controller
in bytes.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.9 |
raidControllerConfigMaxSystemDrivesThe maximum number of system drives supported by the
RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.10 |
raidControllerConfigMaxDrivesPerSystemDriveThe maximum number of drives which the RAID controller
permits to be part of a system drive.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.11 |
raidControllerConfigMaxSpanPerVirtualDriveThe maximum number of spans which the RAID controller permits
to be part of a virtual drive.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.12 |
raidControllerConfigFirmwareVersionFirmware version installed in this RAID controller.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.13 |
raidControllerConfigFirmwareTypeFirmware type installed in this RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.14 |
raidControllerConfigFirmwareMajorMajor version of firmware installed in this RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.15 |
raidControllerConfigFirmwareMinorMinor version of firmware installed in the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.16 |
raidControllerConfigMaximumCommandsMaximum number concurrent commands that may be performed by
the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.17 |
raidControllerConfigFirmwareBuildBuild version of the firmware installed in the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.18 |
raidControllerConfigRebuildRateThe rebuild rate of the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.19 |
raidControllerConfigRebuildUnitThe rebuild unit size in milliseconds used in the rate
figure raidControllerConfigRebuildRate for the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.20 |
raidControllerConfigRebuildOnThe rebuild on time of the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.21 |
raidControllerConfigRebuildOffThe rebuild off time of the RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.22 |
raidControllerBatteryBackupTableA table containing information about the battery
backup unit within each RAID controller present in
each rack within the system.
The number of entries in the table is given by the value of
rackNumber provided that the system can communicate with the rack.
This object is now obsolete.obsolete SEQUENCE OF RaidControllerBatteryBackupEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3 |
raidControllerBatteryBackupEntryInformation about the battery backup unit within
a RAID controller.
This object is now obsolete.obsolete RaidControllerBatteryBackupEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1 |
raidControllerBatteryBackupRackIndexThe rack in which the RAID controller containing
the battery backup unit is located.
The controller and battery backup unit identified
by a particular value of this index is located within
the rack identified by the same value of rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.1 |
raidControllerBatteryBackupNoSyncIndicates whether a reconditioning cycle has been performed
since power up of the RAID controller.
noSync(1) - there has NOT been a reconditioning cycle
since powering up the RAID controller.
sync(2) - there has been a reconditioning cycle
since powering up the RAID controller.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.2 |
raidControllerBatteryBackupOutOfSyncIndicates whether a reconditioning cycle is needed.
outOfSync(1) - a reconditioning cycle needs to be performed.
sync(2) - a reconditioning cycle does NOT need to be
performed.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.3 |
raidControllerBatteryBackupFirstWarningIndicates whether a first warning for low battery power
has been issued.
firstWarning(1) - a first warning has been issued.
noFirstWarning(2) - no first warning has been issued.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.4 |
raidControllerBatteryBackupSecondWarningIndicates whether a second warning for low battery power
has been issued.
secondWarning(1) - a second warning has been issued.
noSecondWarning(2) - no second warning has been issued.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.5 |
raidControllerBatteryBackupReconditioningIndicates whether the battery is currently being reconditioned.
reconditioning(1) - the battery is being reconditioned.
notReconditioning(2) - the battery is NOT being reconditioned.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.6 |
raidControllerBatteryBackupDischargingIndicates whether the battery is currently being discharged.
discharging(1) - the battery is currently being discharged.
notDischarging(2) - the battery is NOT currently being discharged.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.7 |
raidControllerBatteryBackupFastChargingIndicates whether the battery is currently fast charging.
fastCharging(1) - the battery is currently being fast
charged.
notFastCharging(2) - the battery is NOT currently being fast
charged.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.8 |
raidControllerBatteryBackupLowPowerIndicates whether the battery is issuing a low power alarm.
lowPowerAlarm(1) - the battery is issuing a low power
alarm.
noLowPowerAlarm(2) - the battery is NOT issuing a lower
power alarm.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.9 |
raidControllerBatteryBackupChargePercentThe percentage charge held by the battery.
This object is now obsolete.roobsolete INTEGER .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.10 |
raidControllerBatteryBackupHardwareVersionThe hardware version of the battery backup unit.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.11 |
raidControllerBatteryBackupBatteryTypeThe type of the battery in the battery backup unit.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.12 |
raidControllerBatteryBackupThresholdThe threshold of the battery life in minutes.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.13 |
raidControllerActiveTaskNumberThe number of active tasks which are currently being
performed by the RAID controller(s) in the system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.4 |
raidControllerActiveTaskTableA table containing information about the tasks currently
being performed by RAID controller(s) present in the system.
The number of entries in this table is given by the value of
raidControllerActiveTaskNumber.
This object is now obsolete.obsolete SEQUENCE OF RaidControllerActiveTaskEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5 |
raidControllerActiveTaskEntryInformation about the active task being performed by the
RAID controller.
This object is now obsolete.obsolete RaidControllerActiveTaskEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1 |
raidControllerActiveTaskRackIndexThe rack in which the RAID controller is located.
The controller identified by a particular value
of this index is located within the rack identified by the
same value of rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.1 |
raidControllerActiveTaskIndexA unique value for each task being performed on a
specific RAID controller.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.2 |
raidControllerActiveTaskTypeThe type of task being performed by the RAID controller.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.3 |
raidControllerActiveTaskLUNThe LUN of the system drive on which the active task is
being performed by the RAID controller.
NOTE: the value is 0 for tasks which are not related to
System Drives. These are where the variable
raidControllerActiveTaskType is
reconditioningBattery(5) or chargingBattery(6)
(affecting the battery backup unit), or
unknown(7).
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.4 |
raidControllerActiveTaskPercentageDoneThe percentage of the task which is complete.
This object is now obsolete.roobsolete INTEGER .1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.5 |
physicalDrives OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.2.2 |
physicalDriveNumberThe number of physical drive bays (regardless of whether
they contain a drive) which are present within all racks
and enclosures within the system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.1 |
physicalDriveTableA table containing the status of each drive bay
present on this system.
The number of entries in this table is given by the value of
physicalDriveNumber.
This object is now obsolete.obsolete SEQUENCE OF PhysicalDriveEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2 |
physicalDriveEntryStatus information about the drive bay.
This object is now obsolete.obsolete PhysicalDriveEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1 |
physicalDriveRackIndexThe rack in which the drive is located.
The drive identified by a particular value
of this index is located within the rack identified by the
same value of rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.1 |
physicalDriveEnclosureIndexThe enclosure in which the physical drive bay is located.
Enclosure numbers start at 1.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.2 |
physicalDriveColumnIndexThe column in the enclosure in which the physical
drive bay is located.
Column numbers starts at 1 (column 1 is located at the
left hand side of the enclosure).
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.3 |
physicalDriveRowIndexThe row in the enclosure in which the physical
drive bay is located.
Row numbers starts at 1 (row 1 is located at the
top of the enclosure).
Example: row 1, column 1 is the top left hand bay
within an enclosure.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.4 |
physicalDriveStatusThe status of the physical drive bay.
notPresent(1) - indicates that there is no drive present
within the drive bay.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.5 |
physicalDriveVendorThe vendor of the drive.
NOTE: If the drive bay is empty this value will be set to
unknown(2).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.6 |
physicalDriveVersionThe version of the firmware installed in the drive.
NOTE: If the drive bay is empty this value will be a zero
length string.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.7 |
physicalDriveCapacityThe storage capacity of the drive in bytes.
NOTE: If the drive bay is empty this value will be 0.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.8 |
enclosures OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.2.3 |
enclosureFanNumberThe total number of fans which are present in all of the
enclosures in all racks within the system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.1 |
enclosureFanTableA table containing status information for each fan located
within each enclosure (of each rack) within this system.
The number of entries in this table is given by the value of
enclosureFanNumber.
This object is now obsolete.obsolete SEQUENCE OF EnclosureFanEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2 |
enclosureFanEntryFan status information.
This object is now obsolete.obsolete EnclosureFanEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1 |
enclosureFanRackIndexThe rack in which the fan is located.
The fan identified by a particular value of this index is
located within the rack identified by the same value of
rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.1 |
enclosureFanEnclosureIndexThe enclosure in which the fan is located.
Enclosure numbers start at 1.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.2 |
enclosureFanFanIndexAn identifier for the fan within the enclosure.
Fan numbers start at 1.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.3 |
enclosureFanStatusThe status of the fan sensor.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.4 |
enclosureFanSpeedAn indication of the speed at which the fan is
running.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.5 |
enclosureTemperatureNumberThe total number of temperature sensors which are
present in all of the enclosures in all racks within
the system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.3 |
enclosureTemperatureTableA table containing temperature readings for each
sensor located within each enclosure (of each rack)
within this system.
The number of entries in this table is given by the value of
enclosureTemperatureNumber.
This object is now obsolete.obsolete SEQUENCE OF EnclosureTemperatureEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4 |
enclosureTemperatureEntryInformation obtained from a temperature sensor located
within an enclosure.
This object is now obsolete.obsolete EnclosureTemperatureEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1 |
enclosureTemperatureRackIndexThe rack in which the temperature sensor is located.
The sensor identified by a particular value of this index is
located within the rack identified by the same value of
rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.1 |
enclosureTemperatureEnclosureIndexThe enclosure in which the temperature sensor is located.
Enclosure numbers start at 1.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.2 |
enclosureTemperatureTempIndexAn identifier for the temperature sensor within
the enclosure.
Temperature sensor numbers start at 1.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.3 |
enclosureTemperatureStatusThe status of the temperature sensor.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.4 |
enclosureTemperatureOverTempA flag indicating whether an over temperature has
been detected by the sensor.
overTemp(1) - an over temperature has been detected.
noOverTemp(2) - an over temperature has NOT been detected.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.5 |
enclosureTemperatureTempCThe temperature measured by the sensor in degrees Celsius.
A value of -1 indicates the temperature could not be
determined.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.6 |
enclosureTemperatureTempFThe temperature measured by the sensor in degrees Fahrenheit.
A value of -1 indicates the temperature could not be
determined.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.7 |
enclosureTemperatureRangeStatus indicator of the temperature with regard to the
operating temperatures expected within the enclosure.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.8 |
enclosurePSUNumberThe total number of power supplies which are present in
all of the enclosures in all racks within the system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.5 |
enclosurePSUTableA table containing status information on each
power supply located within each enclosure (of each rack)
within this system.
The number of entries in this table is given by the value of
enclosurePSUNumber.
This object is now obsolete.obsolete SEQUENCE OF EnclosurePSUEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6 |
enclosurePSUEntryInformation about a power supply within an enclosure.
This object is now obsolete.obsolete EnclosurePSUEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1 |
enclosurePSURackIndexThe rack in which the power supply is located.
The power supply identified by a particular value of this index is
located within the rack identified by the same value of
rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.1 |
enclosurePSUEnclosureIndexThe enclosure in which the power supply is located.
Enclosure numbers start at 1.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.2 |
enclosurePSUPSUIndexAn identifier for the power supply within the
enclosure.
Power supply numbers start at 1.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.3 |
enclosurePSUStatusThe operational status of the power supply.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.4 |
enclosureAlarmNumberThe total number of alarm modules which are present
in all of the enclosures in all racks within the system.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.7 |
enclosureAlarmTableA table containing status information on each
alarm module located within each enclosure (of each rack)
within this system.
The number of entries in this table is given by the value of
enclosureAlarmNumber.
This object is now obsolete.obsolete SEQUENCE OF EnclosureAlarmEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8 |
enclosureAlarmEntryInformation about a alarm module within an enclosure.
This object is now obsolete.obsolete EnclosureAlarmEntry .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1 |
enclosureAlarmRackIndexThe rack in which the alarm module is located.
The alarm module identified by a particular value of this index is
located within the rack identified by the same value of
rackIndex.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.1 |
enclosureAlarmEnclosureIndexThe enclosure in which the alarm module is located.
Enclosure numbers start at 1.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.2 |
enclosureAlarmAlarmIndexAn identifier for the alarm module within the
enclosure.
Alarm module numbers start at 1.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.3 |
enclosureAlarmStatusThe operational status of alarm module.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.4 |
enclosureAlarmBeepingIndicates whether the alarm module is beeping or not.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.5 |
automount OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.3 |
automountNumberThe number of automounts configured.
This object is obsolete.
Volumes are no longer automounted.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.3.1 |
automountTableA table containing the automount configuration.
The number of entries in this table is given by the value of
automountNumber.
This object is obsolete.
Volumes are no longer automounted.obsolete SEQUENCE OF AutomountEntry .1.3.6.1.4.1.11096.6.1.1.1.3.3.2 |
automountEntryAn automount configuration entry.
This object is obsolete.
Volumes are no longer automounted.obsolete AutomountEntry .1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1 |
automountIndexAn identifier for the automount.
Its value ranges between 1 and the value of automountNumber.
This object is obsolete.
Volumes are no longer automounted.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.1 |
automountPartitionIndexThe partition number of the disk to automount.
This object is obsolete.
Volumes are no longer automounted.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.2 |
automountWWNThe world wide name (WWN) of the disk to automount.
This object is obsolete.
Volumes are no longer automounted.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.3 |
automountLUNThe logical unit number (LUN) of the disk to automount.
This object is obsolete.
Volumes are no longer automounted.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.4 |
systemDrives OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.4 |
sysDriveNumberThe number of accessible system drives.
NOTE: A system drive is a single logical drive which is
created and managed by a RAID controller. It comprises of
a number of physical drives, each of which contribute to
the total storage capability of the system drive.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.4.1 |
sysDriveTableA table containing information about each accessible
system drive.
The number of entries in this table is given by the value of
sysDriveNumber. SEQUENCE OF SysDriveEntry .1.3.6.1.4.1.11096.6.1.1.1.3.4.2 |
sysDriveEntryInformation about a system drive. SysDriveEntry .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1 |
sysDriveIndexAn identifier for the system drive (system drive id).
Its value ranges between 1 and the value of sysDriveNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.1 |
sysDriveWWNThe world wide name (WWN) of the system drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.2 |
sysDriveLUNThe logical unit number (LUN) of the system drive.
NOTE: upto 8 system drives can exist under a single
RAID controller.
LUNs range from 0 to 7.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.3 |
sysDriveStatusThe status of the system drive.
online(1) - the system drive is accessible through
the fibre channel interface.
corrupt(2) - the system drives master boot record
is corrupt.
failed(3) - the system drive has failed and is no
longer accessible through the fibre
channel interface.
notPresent(4) - device no longer present.
disconnected(5) - device is present but not accessible
by the controller
offline(6) - all ports are offline
initializing(7) - not accessible until initialization phase has
completed
formatting(8) - device is formatting
unknown(9) - unknown device status
This object will only have the value unknown(9).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.4 |
sysDriveCapacityThe capacity of the system drive in bytes.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.5 |
sysDriveRaidLevelThe configured RAID level of the system drive.
NOTE : jBOD(6) - means just a bunch of disks.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.6 |
sysDriveCacheModeThe caching mode employed by the RAID controller for
this system drive.
This object will only have the value unknown(3).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.7 |
volumes OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.5 |
volumeNumberThe number of volumes which are known to the system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.5.1 |
volumeTableA table containing information about each volume
known to the system.
The number of entries in this table is given by the value of
volumeNumber. SEQUENCE OF VolumeEntry .1.3.6.1.4.1.11096.6.1.1.1.3.5.2 |
volumeEntryInformation about a volume. VolumeEntry .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1 |
volumeSysDriveIndexThe system drive on which the volume is stored.
The system drive identified by a particular value of this index is
located on the system drive identified by the same value of
sysDriveIndex.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.1 |
volumePartitionIDThe partition ID of the volume.
NOTE: this is the offset from the start of the system drive
at which the volume starts.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.2 |
volumeLabelThe label assigned to the volume by a user for
identification purposes.
NOTE: If a label has not been assigned to the volume, this
value will be a zero length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.3 |
volumeStatusThe status of the volume.
unformatted(1) - the volume does NOT contain a filesystem.
mounted(2) - the volume contains a file system and may
be being accessed by users.
formatted(3) - the volume contains a filesystem, but is
not accessible by users as it is not
mounted.
needsChecking(4) - the filesystem has some errors and cannot
be mounted. Its must be checked and fixed
before it can be accessed by users.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.4 |
volumeCapacityThe volumes capacity in bytes.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.5 |
volumeFreeCapacityThe remaining free volume capacity in bytes.
NOTE: This value is 0 if the volume is not mounted.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.6 |
volumeEnterpriseVirtualServerThe name of the Enterprise Virtual Server to which this
volume is assigned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.7 |
fsStatsTableA table containing statistics about each FileSystem
known to the system.
The number of entries in this table is given by the value of
volumeNumber. SEQUENCE OF FsStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.5.3 |
fsStatsEntryStatistics on a FileSystem. FsStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1 |
fsPermIdThe permanent ID of the FileSystem for which these statistics
are reported.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.1 |
fsLabelThe label of the FileSystem for which these statistics
are reported.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.2 |
opsPerSecAverageThe average ops per second for the FileSystem.
If the FileSystem is not mounted, or is unavailable for some other
reason, this value is zero.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.3 |
fcStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.6 |
fcRequestsThe total number of requests issued through the fibre channel
interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.1 |
fcResponsesThe total number of responses received through the fibre channel
interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.2 |
fcReadReqsThe total number of disk read requests issued through the fibre
channel interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.3 |
fcWriteReqsThe total number of disk write requests issued through the
fibre channel interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.4 |
fcReadRespsThe total number of disk read responses received through the
fibre channel interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.5 |
fcWriteRespsThe total number of disk write responses received through the
fibre channel interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.6 |
fcInstInRateThe instantaneous receive rate in bytes per second for data
received through the fibre channel interface.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.7 |
fcInstOutRateThe instantaneous transmission rate in bytes per second for
data transmitted through the fibre channel interface.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.8 |
fcPkInRateThe peak receive rate in bytes per second for data received
through the fibre channel interface.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.9 |
fcPkOutRateThe peak transmission rate in bytes per second for
data transmitted through the fibre channel interface.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.10 |
fcCacheHitsThe total number of disk read requests which were fulfilled
through reading the sector cache (ie the requests did NOT
require access to the disk).ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.11 |
fcCacheMissesThe total number disk read requests which required access
to the disk (ie the requests could NOT be fulfilled
through reading the sector cache).ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.12 |
fcLossSignalErrsThe total number of loss of signal errors.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.13 |
fcBadRXCharErrsThe total number of bad receive character errors.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.14 |
fcLossSyncErrsThe total number of loss of synchronisation errors.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.15 |
fcLinkFailErrsThe total number of link fail errors.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.16 |
fcRXEOFErrsThe total number of messages received from the frame sender
indicating that the frame should be aborted because a problem
occurred during transmission.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.17 |
fcDiscardedFrameErrsThe total number of discarded frame errors.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.18 |
fcBadCRCErrsThe total number of framing errors due to bad cyclic redundancy
codes.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.19 |
fcProtErrsThe total number of fibre channel protocol errors.
This object is obsolete. It forms a column in fcStatsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.20 |
fcIOStatusResubsThe number of I/O requests that were resubmitted because they
failed the first time.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.21 |
fcIOStatusFailsThe number of I/O requests that failed after resubmission.
NOTE: This indicates a fatal error condition with the fibre
channel interface hardware.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.22 |
fibreChannelInterfaceNumberThe number of fibre channel interfaces.ro Unsigned32 (1 .. 32) --32 interfaces? .1.3.6.1.4.1.11096.6.1.1.1.3.6.23 |
fcStatsTableA table of statistics for the fibre channel interfaces.
This object is now obsolete.obsolete SEQUENCE OF FcStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.6.24 |
fcStatsEntryA set of statistics for a fibre channel interface. The
interface is indexed by fcInterfaceIndex.
This object is now obsolete.obsolete FcStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1 |
fcInterfaceIndexThe index of the fibre channel interface to which
the statistics in this row apply.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.1 |
fcInstantaneousInRateThe number of bytes received by a fibre channel
interface in the last second.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.2 |
fcInstantaneousOutRateThe number of bytes transmitted by a fibre channel
interface in the last second.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.3 |
fcPeakInRateThe peak receive rate in bytes per second for data received
through a fibre channel interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.4 |
fcPeakOutRateThe peak transmission rate in bytes per second for data
transmitted through a fibre channel interface.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.5 |
fcSignalLossErrorsThe total number of loss of signal errors by a fibre channel
interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.6 |
fcBadRXCharErrorsThe number of bad receive character errors at a fibre
channel interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.7 |
fcLossSyncErrorsThe number of loss of synchronisation errors at a fibre
channel interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.8 |
fcLinkFailErrorsThe number of link fail errors at a fibre channel interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.9 |
fcRXEOFErrorsThe number of messages received at a fibre channel interface
from the frame sender indicating that the frame should be
aborted because a problem occurred during transmission.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.10 |
fcDiscardedFrameErrorsThe number of discarded frame errors at a fibre channel
interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.11 |
fcBadCRCErrorsThe number of framing errors due to bad cyclic redundancy
codes, at a fibre channel interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.12 |
fcProtocolErrorsThe number of fibre channel protocol errors at a fibre
channel interface.
This object is now obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.13 |
fcStatisticsTableA table of statistics for the fibre channel interfaces. SEQUENCE OF FcStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.6.25 |
fcStatisticsEntryA set of statistics for a fibre channel interface. The
interface is indexed by fcInterfaceIndex. FcStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1 |
fcStatsClusterNodeThe Cluster Node to which this row applies.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.1 |
fcStatsInterfaceIndexThe index of the fibre channel interface to which
the statistics in this row apply.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.2 |
fcStatsInterfaceEnabledWhether the fibre interface is enabled or not.
unknown(0) - the information could not be obtained.
enabled(1) - the interface is enabled.
disabled(2) - the interface is disabled.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.3 |
fcStatsInterfaceStatusThe status of the fibre interface.
unknown(0) - the information could not be obtained.
up(1) - the interface is up.
isolated(2) - the interface is isolated.
down(3) - the interface is down.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.4 |
fcStatsInterfaceLinkSpeedThe speed of the fibre channel interface in Gbps.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.5 |
fcStatsInterfaceLinkTypeThe link-type of the fibre interface.
unknown(0) - the information could not be obtained.
n(1) - fabric direct attach.
nl(2) - arbitrated loop operation.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.6 |
fcStatsInstantaneousInRateThe number of bytes received by a fibre channel
interface in the last second.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.7 |
fcStatsInstantaneousOutRateThe number of bytes transmitted by a fibre channel
interface in the last second.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.8 |
fcStatsPeakInRateThe peak receive rate in bytes per second for data received
through a fibre channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.9 |
fcStatsPeakOutRateThe peak transmission rate in bytes per second for data
transmitted through a fibre channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.10 |
fcStatsTotalRxBytesThe total bytes received through a fibre channel interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.11 |
fcStatsTotalTxBytesThe total bytes transmitted through a fibre channel interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.12 |
fcStatsSignalLossErrorsThe total number of loss of signal errors by a fibre channel
interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.13 |
fcStatsBadRXCharErrorsThe number of bad receive character errors at a fibre
channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.14 |
fcStatsLossSyncErrorsThe number of loss of synchronisation errors at a fibre
channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.15 |
fcStatsLinkFailErrorsThe number of link fail errors at a fibre channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.16 |
fcStatsRXEOFErrorsThe number of messages received at a fibre channel interface
from the frame sender indicating that the frame should be
aborted because a problem occurred during transmission.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.17 |
fcStatsDiscardedFrameErrorsThe number of discarded frame errors at a fibre channel
interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.18 |
fcStatsBadCRCErrorsThe number of framing errors due to bad cyclic redundancy
codes, at a fibre channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.19 |
fcStatsProtocolErrorsThe number of fibre channel protocol errors at a fibre
channel interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.20 |
virtualVolumes OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.7 |
virtualVolumeNumberThe number of virtual volumes which are currently accessible.
NOTE: a virtual volume is only accessible if its associated
parent volume is mounted.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.1 |
virtualVolumeTableA table containing information about each virtual volume.
The number of entries in this table is given by the value of
virtualVolumeNumber.
This object has been obsolete.obsolete SEQUENCE OF VirtualVolumeEntry .1.3.6.1.4.1.11096.6.1.1.1.3.7.2 |
virtualVolumeEntryInformation about a virtual volume.
This object has been obsolete.obsolete VirtualVolumeEntry .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1 |
virtualVolumeSysDriveIndexThe parent system drive of the virtual volume.
The system drive identified by a particular value of this index is
located on the system drive identified by the same value of
sysDriveIndex.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.1 |
virtualVolumePartitionIDThe partition ID of the parent volume of this virtual volume.
The virtualVolumeSysDriveIndex and this value may be used to
index the volumeTable in order to establish the parent volume.
This object has been obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.2 |
virtualVolumeLabelThe label assigned to the virtual volume by a user for
identification purposes.
This object has been obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.3 |
virtualVolumeQuotaEnabledIndicates whether the virtual volume quota checking
facility is enabled or not.
enabled(1) - quota checking is enabled.
disabled(2) - quota checking is disabled.
This object has been obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.4 |
virtualVolumeLimitThe maximum size this virtual volume is limited to
in bytes for the purposes of quota checking.
This object has been obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.5 |
virtualVolumeWarningAlertIf the quota facility is enabled and the storage
space used exceeds this percentage of the virtual
volumes limit (virtualVolumeLimit) a warning alert
will be generated.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.6 |
virtualVolumeCriticalAlertIf the quota facility is enabled and the storage
space used exceeds this percentage of the virtual
volumes limit (virtualVolumeLimit) a critical alert
will be generated.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.7 |
virtualVolumeHardLimitEnabledIf the quota facility is enabled, this value
indicates whether the file system should enforce
a hard limit on the quota such that if the
virtual volumes limit (virtualVolumeLimit) is reached,
the user will not be able to create or modify any file
which would cause the quota to be exceeded.
enabled(1) - quota hard limit is enabled.
disabled(2) - quota hard limit is disabled.
This object has been obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.8 |
virtualVolumeQuotaBytesUsedIf the quota facility is enabled this value is
the number of bytes used from this quota otherwise
it will be set 0.
This object has been obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.9 |
virtualVolumeQuotaPercentageUsedIf the quota facility is enabled this value is
the percentage of the quota used otherwise it will
set to 0.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.10 |
memberListNumberThe number of member list entries for all virtual volumes
which are accessible.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.3 |
memberListTableA table containing information about each member list
item.
The number of entries in this table is given by the value of
memberListNumber..
This object has been obsolete.obsolete SEQUENCE OF MemberListEntry .1.3.6.1.4.1.11096.6.1.1.1.3.7.4 |
memberListEntryInformation about a member list item.
This object has been obsolete.obsolete MemberListEntry .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1 |
memberListVolumeSysDriveIndexThe parent system drive of the virtual volume and
member list item.
The system drive identified by a particular value of this index is
located on the system drive identified by the same value of
sysDriveIndex.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.1 |
memberListVolumePartitionIDThe partition ID of the parent volume of this virtual volume
and member list item.
The memberListVolumeSysDriveIndex and this value may be used to
index the volumeTable in order to establish the parent volume.
This object has been obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.2 |
memberListVirtualVolumeLabelThe label of the parent virtual volume of this member list
item.
This object has been obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.3 |
memberListIndexAn identifier for this member list entry.
This identifier ranges from 1 to the number of member list
items configured for the parent virtual volume.
This object has been obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.4 |
memberListPathThe path the member list item is associated with.
This object has been obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.5 |
memberListStatusThis status of the member list item.
This object has been obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.6 |
snapshot OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.8 |
snapshotRuleNumberThe number of snapshot rules which are configured for
this system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.1 |
snapshotRuleTableA table containing information about each snapshot rule.
The number of entries in this table is given by the value of
snapshotRuleNumber.
This object is now obsolete.obsolete SEQUENCE OF SnapshotRuleEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.2 |
snapshotRuleEntryInformation about a snapshot rule.
This object is now obsolete.obsolete SnapshotRuleEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1 |
snapshotRuleNameThe name of the snapshot rule. Each snapshot rule has a unique
name.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.1 |
snapshotRuleWWNThe world wide name (WWN) of the system drive the snapshot rule
is associated with.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.2 |
snapshotRuleLUNThe logical unit number (LUN) of the system drive the
snapshot rule is associated with.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.3 |
snapshotRulePartitionIDThe partition ID of the volume the snapshot rule is associated
with.
This object is now obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.4 |
snapshotRuleQueueSizeThe number of snapshots to keep before the system deletes the
oldest snapshot.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.5 |
snapshotRuleVolumeLabelThe label of the volume to which the snapshot rule relates.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.6 |
snapshotScheduleNumberThe number of snapshot schedules which are configured for
this system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.3 |
snapshotScheduleTableA table containing information about each snapshot schedule.
The number of entries in this table is given by the value of
snapshotScheduleNumber.
This object is now obsolete.obsolete SEQUENCE OF SnapshotScheduleEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.4 |
snapshotScheduleEntryInformation about a snapshot schedule.
This object is now obsolete.obsolete SnapshotScheduleEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1 |
snapshotScheduleRuleNameThe name of the parent snapshot rule that this schedule
is associated with.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.1 |
snapshotScheduleIndexAn identifier for this snapshot schedule entry.
This identifier ranges from 1 to the number of snapshot
schedules configured for the parent snapshot rule.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.2 |
snapshotScheduleDateTimeSpecThe date and time specification for when this snapshot
schedule will be run in cron format.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.3 |
snapshotRulesTableA table containing information about each snapshot rule.
The number of entries in this table is given by the value of
snapshotRuleNumber. SEQUENCE OF SnapshotRulesEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.5 |
snapshotRulesEntryInformation about a snapshot rule. SnapshotRulesEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1 |
snapshotRulesEVSThe ID of the EVS on which this rule is defined.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.1 |
snapshotRulesNameThe name of the snapshot rule. Each snapshot rule has a unique
name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.2 |
snapshotRulesQueueSizeThe number of snapshots to keep before the system deletes the
oldest snapshot.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.3 |
snapshotRulesVolumeLabelThe label of the volume to which the snapshot rule relates.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.4 |
snapshotSchedulesTableA table containing information about each snapshot schedule.
The number of entries in this table is given by the value of
snapshotScheduleNumber. SEQUENCE OF SnapshotSchedulesEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.6 |
snapshotSchedulesEntryInformation about a snapshot schedule. SnapshotSchedulesEntry .1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1 |
snapshotSchedulesEVSThe ID of the EVS on which this schedule is defined.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.1 |
snapshotSchedulesRuleNameThe name of the parent snapshot rule that this schedule
is associated with.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.2 |
snapshotSchedulesIndexAn identifier for this snapshot schedule entry.
This identifier ranges from 1 to the number of snapshot
schedules configured for the parent snapshot rule.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.3 |
snapshotSchedulesDateTimeSpecThe date and time specification for when this snapshot
schedule will be run in cron format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.4 |
nvramStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.1.3.9 |
nvramFsStatsNumberThe number of volumes with NVRAM statistics.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.1 |
nvramFsStatsTableA table of NVRAM data for a given volume. SEQUENCE OF NvramFsStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.9.2 |
nvramFsStatsEntryInformation about NVRAM on a given volume. The
volume must be formatted, mounted, and NVRAM must
be supported. NvramFsStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1 |
fsIdThe id of the Span hosting the volume with which the
NVRAM is associated.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.1 |
nvramFsStatsCurrentUsageThe amount of NVRAM currently in use for this volume.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.2 |
nvramFsStatsCheckpointsThe total number of checkpoints which have occurred for the
NVRAM assigned to this volume.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.3 |
nvramFsStatsActivityCheckpointsThe number of checkpoints which have occurred for the NVRAM
assigned to this volume as a result of file system activity
(i.e. not timed checkpoints.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.4 |
nvramFsStatsWaitedAllocsThe number of allocations for this file system for which
a wait has occurred.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.5 |
nvramFsStatsWaitingAllocsThe number of allocations for this file system for which
a wait is currently occurring.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.6 |
nvramPoolStatsTableA table of NVRAM data for a given Cluster Node. SEQUENCE OF NvramPoolStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.9.6 |
nvramPoolStatsEntryInformation about NVRAM on a given Cluster Node. NvramPoolStatsEntry .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1 |
clusterNodeIdThe ID of the cluster node for which these pool
statistics are reported.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.1 |
nvramPoolStatsSizeThe total size of nvram. If no formatted or mounted volume
is found, or if nvram is not supported, this value will be reported
as zero.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.2 |
nvramPoolStatsMaximumUsedThe maximum amount of nvram used. If no formatted or mounted volume
is found, or if nvram is not supported, this value will be reported
as zero.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.3 |
nvramPoolStatsTotalCurrentUsageThe amount of nvram currently in use. If no formatted or mounted
volume is found, or if nvram is not supported, this value will be
reported as zero.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.4 |
nvramPoolStatsWaitedAllocsThe number of allocations, for the entire NVRAM pool, for which
a wait has occurred.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.5 |
nvramPoolStatsWaitingAllocsThe number of allocations, for the entire NVRAM pool, for which
a wait is occurring.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.6 |
network OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2 |
etherStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.1 |
ethOutPktsThe number of packets successfully transmitted through the
network interface.
This object is obsolete.
It has been grouped with other related statistics.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.1 |
ethInPktsThe number of packets successfully received through the
network interface.
This object is obsolete.
It has been grouped with other related statistics.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.2 |
ethInstInOctetRateThe instantaneous receive rate in bytes per second for
data received through the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.3 |
ethInstOutOctetRateThe instantaneous transmission rate in bytes per second for
data transmitted through the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.4 |
ethPkInOctetRateThe peak receive rate in bytes per second for data received
through the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.5 |
ethPkOutOctetRateThe peak transmission rate in bytes per second for data
transmitted through the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.6 |
ethInFIFODropsThe number of FIFO drops which have occurred on the network
interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.7 |
ethCRCErrsThe number of cyclic redundancy code errors which have
occurred on the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.8 |
ethOutFIFOUflowsThe number of transmit FIFO underflows which have occurred
on the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.9 |
ethOutOneCollisionThe number of one collisions which have occurred on the
network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.10 |
ethOutTwoCollisionThe number of two to fifteen collisions which have occurred on
the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.11 |
ethOutFifteenCollisionThe number of more than fifteen collisions which have occurred on
the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.12 |
ethInEvFIFOPktDropThe number received packets dropped by the event FIFO.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.13 |
ethEvFIFOMaxEventsThe maximum number of events in the event FIFO.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.14 |
ethOutPacketsThe number of packets successfully transmitted through the
network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.15 |
ethInPacketsThe number of packets successfully received through the
network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.16 |
ethTotalPacketsThe total number of packets successfully transmitted and received
through the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.17 |
ethOutBytesThe number of bytes successfully transmitted through the
network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.18 |
ethInBytesThe number of bytes successfully received through the
network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.19 |
ethTotalBytesThe total number of bytes successfully transmitted and received
through the network interface.
This object is obsolete. It now forms part of the table
ethernetStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.20 |
ethernetStatisticsTableA table of statistics for ethernet interfaces.
The number of entries in this table is given by the value of
ifNumber. SEQUENCE OF EthernetStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.2.1.21 |
ethernetStatisticsEntryStatistics for ethernet interfaces. EthernetStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.2.1.21.1 |
ethernetInstInOctetRateThe instantaneous receive rate in bytes per second for
data received through the network interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.1 |
ethernetInstOutOctetRateThe instantaneous transmission rate in bytes per second for
data transmitted through the network interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.2 |
ethernetPkInOctetRateThe peak receive rate in bytes per second for data received
through the network interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.3 |
ethernetPkOutOctetRateThe peak transmission rate in bytes per second for data
transmitted through the network interface.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.4 |
ethernetInFIFODropsThe number of FIFO drops which have occurred on the network
interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.5 |
ethernetCRCErrsThe number of cyclic redundancy code errors which have
occurred on the network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.6 |
ethernetOutFIFOUflowsThe number of transmit FIFO underflows which have occurred
on the network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.7 |
ethernetOutOneCollisionThe number of one collisions which have occurred on the
network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.8 |
ethernetOutTwoCollisionThe number of two to fifteen collisions which have occurred on
the network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.9 |
ethernetOutFifteenCollisionThe number of more than fifteen collisions which have occurred on
the network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.10 |
ethernetInEvFIFOPktDropThe number received packets dropped by the event FIFO.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.11 |
ethernetEvFIFOMaxEventsThe maximum number of events in the event FIFO.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.12 |
ethernetOutPacketsThe number of packets successfully transmitted through the
network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.13 |
ethernetInPacketsThe number of packets successfully received through the
network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.14 |
ethernetTotalPacketsThe total number of packets successfully transmitted and received
through the network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.15 |
ethernetOutBytesThe number of bytes successfully transmitted through the
network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.16 |
ethernetInBytesThe number of bytes successfully received through the
network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.17 |
ethernetTotalBytesThe total number of bytes successfully transmitted and received
through the network interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.1.21.1.18 |
tcpipStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.2 |
tcpOpenConnsThe number of currently open TCP/IP connections.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.2.2.1 |
tcpMaxOpenConnsThe maximum number of open TCP/IP connections.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.2.2.2 |
tcpTotalOpenConnsThe total number of TCP/IP connections ever opened (cumulative).ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.3 |
tcpFailedInConnsThe number of failed incoming TCP/IP connections.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.4 |
tcpFailedOutConnsThe number of failed outgoing TCP/IP connections.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.5 |
tcpOutSegmentsThe number of segments transmitted.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.6 |
tcpInSegmentsThe number of segments received.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.7 |
tcpReOutSegmentsThe number of retransmitted segments.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.8 |
tcpInvSegmentsThe number of invalid segments.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.9 |
tcpIPInPktsThe total number of IP packets received.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.10 |
tcpIPOutPktsThe total number of IP packets transmitted.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.11 |
tcpIPInInvPktsThe total number of invalid IP packets received.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.12 |
tcpIPInInvHdrPktsThe total number of IP packets received with invalid
header fields.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.13 |
tcpIPInInvChksumPktsThe total number of IP packets received with invalid
checksums.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.14 |
tcpIPInInvNUcastAddrPktsThe total number of IP packets received with broadcast/multicast
destination address errors.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.15 |
tcpIPInInvUcastAddrPktsThe total number of IP packets received with unicast destination
address errors.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.16 |
tcpIPInInvSrcAddrPktsThe total number of IP packets received with source address
errors.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.17 |
tcpIPInInvOptionPktsThe total number of IP packets received with invalid
options.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.18 |
tcpInOversizeSegmentErrsThe total number of received segments which are oversized
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.19 |
tcpInInvChksumPktsThe total number of received TCP packets with invalid checksums.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.20 |
tcpLinkPktDropsThe total number of packet dropped by the link layer.
This object is obsolete. It now forms part of the table
tcpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.21 |
tcpStatisticsTableA table of TCP statistics for ethernet interfaces.
The number of entries in this table is given by the value of
ifNumber. SEQUENCE OF TcpStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.2.2.22 |
tcpStatisticsEntryTCP statistics for ethernet interfaces. TcpStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.2.2.22.1 |
tcpTxSegmentsThe number of segments transmitted.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.1 |
tcpRxSegmentsThe number of segments received.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.2 |
tcpReTxSegmentsThe number of retransmitted segments.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.3 |
tcpInvalidSegmentsThe number of invalid segments.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.4 |
tcpIPTxPktsThe total number of IP packets transmitted.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.5 |
tcpIPRxPktsThe total number of invalid IP packets received.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.6 |
tcpIPRxInvalidPktsThe total number of invalid IP packets received.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.7 |
tcpIPRxInvalidHdrPktsThe total number of IP packets received with invalid
header fields.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.8 |
tcpIPRxInvalidChksumPktsThe total number of IP packets received with invalid
checksums.
This object has been obsolete. It is now
included in the object tcpIPMiscBadSegements.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.9 |
tcpIPRxInvalidNUcastAddrPktsThe total number of IP packets received with broadcast/multicast
destination address errors.
This object has been obsolete. It is now
included in the object tcpIPMiscBadSegements.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.10 |
tcpIPRxInvalidUcastAddrPktsThe total number of IP packets received with unicast destination
address errors.
This object has been obsolete. It is now
included in the object tcpIPMiscBadSegements.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.11 |
tcpIPRxInvalidSrcAddrPktsThe total number of IP packets received with source address
errors.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.12 |
tcpIPRxInvalidOptionPktsThe total number of IP packets received with invalid
options.
This object has been obsolete. It is now
included in the object tcpIPMiscBadSegements.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.13 |
tcpIPMiscBadSegmentsThe total number of invalid IP packets received. The
faults include invalid checksum, unicast and non-unicast
address, and option.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.14 |
tcpRxOversizeSegmentErrsThe total number of received segments which are oversized.
This object has been obsolete. It is now
included in the object tcpRxInvalidSegments.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.15 |
tcpRxInvalidChksumPktsThe total number of received segments which are oversized.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.16 |
tcpLinkPacketDropsThe total number of packet dropped by the link layer.
This object has been obsolete. It is now
included in the object tcpRxInvalidSegments.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.2.22.1.17 |
udpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.3 |
udpInShortPktsThe total number of short UDP packets received.
This object is obsolete. It now forms part of the table
udpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.3.1 |
udpInInvChksumPktsThe total number of UDP packets received with invalid
checksums.
This object is obsolete. It now forms part of the table
udpStatisticsTable.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.2.3.2 |
udpStatisticsTableA table of UDP statistics for ethernet interfaces.
The number of entries in this table is given by the value of
ifNumber. SEQUENCE OF UdpStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.2.3.3 |
udpStatisticsEntryUDP statistics for ethernet interfaces. UdpStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.2.3.3.1 |
udpRxShortPktsThe total number of short UDP packets received.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.3.3.1.1 |
udpRxInvChksumPktsThe total number of UDP packets received with invalid
checksums.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.2.3.3.1.2 |
advipConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.4 |
tcpArpCacheTimeoutThe ARP cache timeout in seconds.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.2.4.1 |
tcpBroadCastUsingZeroBroadcast using IP address 0.
enabled(1) - broadcast using IP address 0.
disabled(2) - DONT broadcast using IP address 0.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.4.2 |
tcpIgnoreICMPEchoIgnore ICMP echo requests.
enabled(1) - ignore ICMP echo requests.
disabled(2) - DONT ignore ICMP echo requests.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.4.3 |
tcpOffSubnetMTUThe IP MTU for off-subnet transmits in bytes.ro INTEGER .1.3.6.1.4.1.11096.6.1.1.2.4.4 |
tcpAllSubnetsMTUUse the same IP MTU (1500 bytes) for all subnets of the
connected network.
enabled(1) - use the same MTU for all subnets.
disabled(2) - DONT use the same MTU for all subnets.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.4.5 |
tcpKeepAliveTCP keep alive option.
enabled(1) - use TCP keep alive.
disabled(2) - DONT use TCP keep alive.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.4.6 |
tcpKeepAliveTimeoutThe TCP keep alive timeout in seconds.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.2.4.7 |
engipConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.5 |
tcpDefWndDefault window size in bytes.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.2.5.1 |
tcpDelayedAcksIndicates whether the delayed ack setting is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.2 |
tcpSlowStartCAIndicates whether the slow start ca setting is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.3 |
tcpSSRestartDoubleMSSIndicates whether the SS restart double mss setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.4 |
tcpNagleIndicates whether the nagle setting is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.5 |
tcpSillyWindowAvoidIndicates whether the silly window avoid setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.6 |
tcpOldAckStrategyIndicates whether the old ack strategy setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.7 |
tcpSlowStartOnIdleIndicates whether the slow start on idle setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.8 |
tcpFastRetxFastRecoveryIndicates whether the fast retx fast recovery setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.9 |
tcpOldPushStrategyIndicates whether the old push strategy setting is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.10 |
tcpOffSubnetSlowStartIndicates whether the off subnet slow start setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.11 |
tcpUDPCheckSumGenIndicates whether the UDP checksum generation setting is enabled
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.12 |
tcpIntelliSegIndicates whether the intelliseg setting is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.5.13 |
nameService OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.6 |
wins OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.6.1 |
winsPrimaryIpAddrThe IP address of the primary wins server if enabled or
0.0.0.0 if not enabled.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.2.6.1.1 |
winsSecondaryIpAddrThe IP address of the secondary wins server if enabled or
0.0.0.0 if not enabled.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.2.6.1.2 |
dns OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.6.2 |
dnsServerNumberThe number of configured DNS servers.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.6.2.1 |
dnsServerTableA table containing the IP addresses of each of the
servers which have been configured as DNS servers
for this system.
The number of entries in this table is given by the value of
dnsServerNumber. SEQUENCE OF DnsServerEntry .1.3.6.1.4.1.11096.6.1.1.2.6.2.2 |
dnsServerEntryInformation about the configured DNS server. DnsServerEntry .1.3.6.1.4.1.11096.6.1.1.2.6.2.2.1 |
dnsServerIndexA unique value for each configured DNS server.
This value defines the DNS search ordering.
Its value ranges between 1 and the value of dnsServerNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.6.2.2.1.1 |
dnsServerIpAddressThe IP address of the DNS server.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.2.6.2.2.1.2 |
dnsSearchNumberThe number of DNS search list entries which are configured
for the system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.6.2.3 |
dnsSearchTableA table containing the DNS search list which is a list of
domain suffices.
The number of entries in this table is given by the value of
dnsSearchNumber. SEQUENCE OF DnsSearchEntry .1.3.6.1.4.1.11096.6.1.1.2.6.2.4 |
dnsSearchEntryDNS search information. DnsSearchEntry .1.3.6.1.4.1.11096.6.1.1.2.6.2.4.1 |
dnsSearchIndexA unique value for each configured DNS search string.
This value defines the DNS search ordering.
Its value ranges between 1 and the value of dnsSearchNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.6.2.4.1.1 |
dnsSearchStringThe DNS search string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.2.6.2.4.1.2 |
nsOrder OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.6.3 |
nameServiceNumberThe number of name services configured to be used for hostname
lookups.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.6.3.1 |
nameServiceTableA table containing the name services which have been
configured for hostname lookups.
The number of entries in this table is given by the value of
nameServiceNumber. SEQUENCE OF NameServiceEntry .1.3.6.1.4.1.11096.6.1.1.2.6.3.2 |
nameServiceEntryInformation about the name service. NameServiceEntry .1.3.6.1.4.1.11096.6.1.1.2.6.3.2.1 |
nameServiceOrderThe order in which the lookup is made.
Its value ranges between 1 and the value of nameServiceNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.6.3.2.1.1 |
nameServiceTypeIndicates the configured service type.
dns(1) - domain name service.
wins(2) - the windows service.
nis(3) - network information service.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.6.3.2.1.2 |
nis OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.2.7 |
nisEnabledIndicates whether NIS is enabled on this system or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.7.1 |
nisDomainThe NIS domain name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.2.7.2 |
nisCurrentMasterThe current NIS master host address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.2.7.3 |
nisServerBroadcastEnabledIndicates whether NIS should broadcast for NIS servers
on the local network instead of using the configured list
of servers.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.7.4 |
nisVerificationEnabledIndicates whether NIS verification is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.2.7.5 |
nisTimeoutNIS timeout value in milliseconds.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.2.7.6 |
nisRebindIntervalNIS rebind in minutes.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.2.7.7 |
nisUserGroupTimeoutNIS user/group/netgroup timeout value in minutes.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.2.7.8 |
nisServerNumberThe number of NIS servers which have been configured.
A value of -1 indicates this information could not
be determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.7.9 |
nisServerTableA table containing information about each NIS server.
The number of entries in this table is given by the value of
nisServerNumber. SEQUENCE OF NisServerEntry .1.3.6.1.4.1.11096.6.1.1.2.7.10 |
nisServerEntryInformation about each configured NIS server. NisServerEntry .1.3.6.1.4.1.11096.6.1.1.2.7.10.1 |
nisServerIndexA unique value for each configured NIS server.
Its value ranges between 1 and the value of nisServerNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.7.10.1.1 |
nisServerIpAddressThe IP address of the NIS server.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.2.7.10.1.2 |
nisServerPriorityThe priority assigned to the NIS server.
A value of -1 indicates this information could not
be determined.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.2.7.10.1.3 |
fileProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3 |
security OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.1 |
securityModeIndicates the configured security model.
mixed(1) - Windows or UNIX environments.
unix(2) - primarily UNIX environments.
nosecurity(3) - all requests granted.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.1.1 |
securityDomainThe servers configured domain name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.1.2 |
cifs OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.2 |
shares OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.2.1 |
shareNumberThe number of CIFS shares which are configured for the system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.1 |
shareTableA table containing the CIFS share configuration for the
system.
The number of entries in this table is given by the value of
shareNumber.obsolete SEQUENCE OF ShareEntry .1.3.6.1.4.1.11096.6.1.1.3.2.1.2 |
shareEntryCIFS share information.obsolete ShareEntry .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1 |
shareNameThe name of the CIFS share. Each share has a unique name.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.1 |
sharePathThe path to the CIFS share.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.2 |
shareCommentAn optional comment assigned by the creator of the
CIFS share to assist in identifying it.
NOTE: This will be a zero length string if the creator has
not assigned a comment to it.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.3 |
shareUsersThe number of users currently accessing the CIFS share.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.4 |
shareWWNThe world wide name (WWN) of the system drive the CIFS
share is associated with.
This will identify the File System
on which the volume associated with the share is hosted.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.5 |
shareLUNThe logical unit number (LUN) of the system drive the
CIFS share is associated with.
This now has no meaning and is set to zero.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.6 |
sharePartitionIDThe partition ID of the volume the CIFS share is associated
with.
This now has no meaning and is set to zero.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.7 |
shareMaxUsersThe maximum number of users which are permitted access to
the CIFS share simultaneously.
NOTE: this value is set to -1 if the number of maximum
number of simultaneous users is unlimited.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.2.1.8 |
cifsShareTableA table containing the CIFS share configuration for the
system.
The number of entries in this table is given by the value of
shareNumber. SEQUENCE OF CifsShareEntry .1.3.6.1.4.1.11096.6.1.1.3.2.1.3 |
cifsShareEntryCIFS share information. CifsShareEntry .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1 |
cifsShareEvsIdThe ID of the Enterprise Virtual Server to which this
share belongs.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.1 |
cifsShareNameThe name of the CIFS share. Each share has a name unique
to the EVS to which it belongs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.2 |
cifsSharePathThe path to the CIFS share.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.3 |
cifsShareCommentAn optional comment assigned by the creator of the
CIFS share to assist in identifying it.
NOTE: This will be a zero length string if the creator has
not assigned a comment to it.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.4 |
cifsShareUsersThe number of users currently accessing the CIFS share.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.5 |
cifsShareMaxUsersThe maximum number of users which are permitted access to
the CIFS share simultaneously.
NOTE: this value is set to -1 if the maximum
number of simultaneous users is unlimited.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.6 |
cifsShareSpanIdThe ID of the volume the CIFS share is associated
with.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.1.3.1.7 |
shareAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.2.2 |
shareAccessNumberThe number of CIFS share access entries which are
configured for the system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.2.1 |
shareAccessTableA table containing the CIFS share access configuration
for the system.
The number of entries in this table is given by the value of
shareAccessNumber. SEQUENCE OF ShareAccessEntry .1.3.6.1.4.1.11096.6.1.1.3.2.2.2 |
shareAccessEntryCIFS share access information. ShareAccessEntry .1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1 |
shareAccessIndexAn index for each access entry which exists for a
CIFS share.
For Si7000 and Si8000 families of SiServers, this
value ranges between 1 and the number of access
entries which exist for the share.
The value is the ID of the EVS of the CIFS share for the
access configuration.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.1 |
shareAccessShareNameThe name of the CIFS share that the access configuration
entry exists for.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.2 |
shareAccessNameThe name of the user or group which has been granted access.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.3 |
shareAccessPermsThe access permissions the user or group has been granted to
the CIFS share.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.2.2.2.1.4 |
cifsStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.2.3 |
cifsClientsThe total number of CIFS clients since power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.1 |
cifsMkdirCallsThe total number of 'Mkdir' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.2 |
cifsRmdirCallsThe total number of 'Rmdir' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.3 |
cifsOpenCallsThe total number of 'Open' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.4 |
cifsCreateCallsThe total number of 'Create' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.5 |
cifsCloseCallsThe total number of 'Close' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.6 |
cifsFlushCallsThe total number of 'Flush' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.7 |
cifsUnlinkCallsThe total number of 'Unlink' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.8 |
cifsRenameCallsThe total number of 'Rename' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.9 |
cifsGetatrCallsThe total number of 'Getatr' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.10 |
cifsSetatrCallsThe total number of 'Setatr' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.11 |
cifsReadCallsThe total number of 'Read' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.12 |
cifsWriteCallsThe total number of 'Write' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.13 |
cifsMknewCallsThe total number of 'Mknew' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.14 |
cifsChkpthCallsThe total number of 'Chkpth' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.15 |
cifsLseekCallsThe total number of 'Lseek' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.16 |
cifsReadBrawCallsThe total number of 'ReadBraw' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.17 |
cifsWriteBrawCallsThe total number of 'WriteBraw' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.18 |
cifsLockingXCallsThe total number of 'LockingX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.19 |
cifsTransCallsThe total number of 'Trans' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.20 |
cifsEchoCallsThe total number of 'Echo' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.21 |
cifsWriteCloseCallsThe total number of 'WriteClose' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.22 |
cifsOpenXCallsThe total number of 'OpenX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.23 |
cifsReadXCallsThe total number of 'ReadX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.24 |
cifsWriteXCallsThe total number of 'WriteX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.25 |
cifsTrans2CallsThe total number of 'Trans2' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.26 |
cifsFindCloseCallsThe total number of 'FindClose' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.27 |
cifsTdisCallsThe total number of 'Tdis' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.28 |
cifsNegProtCallsThe total number of 'NegProt' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.29 |
cifsSessSetupXCallsThe total number of 'SessSetupX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.30 |
cifsUlogoffXCallsThe total number of 'UlogoffX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.31 |
cifsTconXCallsThe total number of 'TconX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.32 |
cifsDskattrCallsThe total number of 'Dskattr' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.33 |
cifsSearchCallsThe total number of 'Search' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.34 |
cifsNTtransCallsThe total number of 'NTtrans' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.35 |
cifsNTtranssCallsThe total number of 'NTtranss' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.36 |
cifsNTcreateXCallsThe total number of 'NTcreateX' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.37 |
cifsNTcancelCallsThe total number of 'NTcancel' CIFS calls received since
power up.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.38 |
cifsStatsTableThe statistics for the CIFS service.
The number of entries in this table is given by the
value of cifsStatsClusterNode. SEQUENCE OF CifsStatsEntry .1.3.6.1.4.1.11096.6.1.1.3.2.3.39 |
cifsStatsEntryThe statistics for the CIFS service. CifsStatsEntry .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1 |
cifsStatsClusterNodeThe Cluster Node for this value.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.1 |
clientsThe total number of CIFS clients since power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.2 |
mkdirCallsThe total number of 'Mkdir' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.3 |
rmdirCallsThe total number of 'Rmdir' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.4 |
openCallsThe total number of 'Open' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.5 |
createCallsThe total number of 'Create' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.6 |
closeCallsThe total number of 'Close' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.7 |
flushCallsThe total number of 'Flush' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.8 |
unlinkCallsThe total number of 'Unlink' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.9 |
renameCallsThe total number of 'Rename' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.10 |
getatrCallsThe total number of 'Getatr' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.11 |
setatrCallsThe total number of 'Setatr' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.12 |
readCallsThe total number of 'Read' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.13 |
writeCallsThe total number of 'Write' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.14 |
mknewCallsThe total number of 'Mknew' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.15 |
chkpthCallsThe total number of 'Chkpth' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.16 |
lseekCallsThe total number of 'Lseek' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.17 |
readBrawCallsThe total number of 'ReadBraw' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.18 |
writeBrawCallsThe total number of 'WriteBraw' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.19 |
lockingXCallsThe total number of 'LockingX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.20 |
transCallsThe total number of 'Trans' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.21 |
echoCallsThe total number of 'Echo' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.22 |
writeCloseCallsThe total number of 'WriteClose' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.23 |
openXCallsThe total number of 'OpenX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.24 |
readXCallsThe total number of 'ReadX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.25 |
writeXCallsThe total number of 'WriteX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.26 |
trans2CallsThe total number of 'Trans2' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.27 |
findCloseCallsThe total number of 'FindClose' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.28 |
tdisCallsThe total number of 'Tdis' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.29 |
negProtCallsThe total number of 'NegProt' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.30 |
sessSetupXCallsThe total number of 'SessSetupX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.31 |
ulogoffXCallsThe total number of 'UlogoffX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.32 |
tconXCallsThe total number of 'TconX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.33 |
dskattrCallsThe total number of 'Dskattr' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.34 |
searchCallsThe total number of 'Search' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.35 |
ntTransCallsThe total number of 'NTtrans' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.36 |
ntTranssCallsThe total number of 'NTtranss' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.37 |
ntCreateXCallsThe total number of 'NTcreateX' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.38 |
ntCancelCallsThe total number of 'NTcancel' CIFS calls received since
power up.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.3.39.1.39 |
cifsService OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.2.4 |
cifsServiceEnabledIndicates whether the CIFS service is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.2.4.1 |
cifsServiceMaxUsersThe maximum number of CIFS users the service will allow.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.2.4.2 |
nfs OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3 |
nfsExports OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.1 |
nfsExportNumberThe number of NFS exports which are configured for the system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.1 |
nfsExportTableA table containing the NFS export configuration for the
system.
The number of entries in this table is given by the value of
nfsExportNumber.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.obsolete SEQUENCE OF NfsExportEntry .1.3.6.1.4.1.11096.6.1.1.3.3.1.2 |
nfsExportEntryNFS export information.obsolete NfsExportEntry .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1 |
nfsExportIndexA unique value for each NFS export configuration
in this system.
Its value ranges between 1 and the value of nfsExportNumber.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.1 |
nfsExportNameThe name of the NFS export. Each export has a unique name.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.2 |
nfsExportPathThe path to the NFS export.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.3 |
nfsExportNumberMountsThe number of mounts of the NFS export.
This object is obsolete. It could not be measured.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.4 |
nfsExportWWNThe world wide name (WWN) of the system drive the NFS
export is associated with.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.5 |
nfsExportLUNThe logical unit number (LUN) of the system drive the
NFS export is associated with.
This now has no meaning and is set to zero.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.6 |
nfsExportPartitionIDThe partition ID of the volume the NFS export is associated
with.
This now has no meaning and is set to zero.
This object is now obsolete, and is re-implemented as a table
indexed by EVS and name.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.2.1.7 |
nfsExportsTableA table containing the NFS export configuration for the
system.
The number of entries in this table is given by the value of
nfsExportNumber. SEQUENCE OF NfsExportsEntry .1.3.6.1.4.1.11096.6.1.1.3.3.1.3 |
nfsExportsEntryNFS export information. NfsExportsEntry .1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1 |
nfsExportsEvsThe ID of the EVS the NFS export is associated with.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.1 |
nfsExportsNameThe name of the NFS export. Each export has a unique name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.2 |
nfsExportsPathThe path to the NFS export.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.3 |
nfsExportsDeviceIdThe device ID of the volume the NFS
export is associated with.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.1.3.1.4 |
nfsUsers OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.2 |
nfsUserNumberThe number of NFS users which are configured for the system.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.3.2.1 |
nfsUserTableA table containing the NFS user configuration for the
system.
The number of entries in this table is given by the value of
nfsUserNumber.obsolete SEQUENCE OF NfsUserEntry .1.3.6.1.4.1.11096.6.1.1.3.3.2.2 |
nfsUserEntryNFS user information.obsolete NfsUserEntry .1.3.6.1.4.1.11096.6.1.1.3.3.2.2.1 |
nfsUserNameThe name of the UNIX user.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.2.2.1.1 |
nfsUserIDThe ID of the UNIX user.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.2.2.1.2 |
nfsUserMapping OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.3 |
nfsUserMappingNumberThe number of NFS to NT user mappings which are configured
for the system.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.3.3.1 |
nfsUserMappingTableA table containing the NFS to NT user mapping configuration
for the system.
The number of entries in this table is given by the value of
nfsUserMappingNumber.obsolete SEQUENCE OF NfsUserMappingEntry .1.3.6.1.4.1.11096.6.1.1.3.3.3.2 |
nfsUserMappingEntryNFS to NT user mapping information.obsolete NfsUserMappingEntry .1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1 |
nfsUserMappingUnixUserNameThe name of the UNIX user for which the mapping exists.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.1 |
nfsUserMappingUnixUserIDValidIndicates whether the UNIX user ID is configured user in
the nfsUserTable.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.2 |
nfsUserMappingUnixUserIDThe UNIX user ID.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.3 |
nfsUserMappingNtUserNameThe name of the NT user for which the mapping exists.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.4 |
nfsUserMappingNtUserDomainNameThe NT domain name for which the mapping exists.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.3.2.1.5 |
nfsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.4 |
nfsGroupNumberThe number of NFS groups configured for the system.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.3.4.1 |
nfsGroupTableA table containing the NFS group configuration for the
system.
The number of entries in this table is given by the value of
nfsGroupNumber.obsolete SEQUENCE OF NfsGroupEntry .1.3.6.1.4.1.11096.6.1.1.3.3.4.2 |
nfsGroupEntryNFS group information.obsolete NfsGroupEntry .1.3.6.1.4.1.11096.6.1.1.3.3.4.2.1 |
nfsGroupNameThe name of the UNIX group.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.4.2.1.1 |
nfsGroupIDThe ID of the UNIX group.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.4.2.1.2 |
nfsGroupMapping OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.5 |
nfsGroupMappingNumberThe number of NFS to NT group mappings which are configured
for the system.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.3.5.1 |
nfsGroupMappingTableA table containing the NFS to NT group mapping configuration
for the system.
The number of entries in this table is given by the value of
nfsGroupMappingNumber.obsolete SEQUENCE OF NfsGroupMappingEntry .1.3.6.1.4.1.11096.6.1.1.3.3.5.2 |
nfsGroupMappingEntryNFS to NT group mapping information.obsolete NfsGroupMappingEntry .1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1 |
nfsGroupMappingUnixGroupNameThe name of the UNIX group for which the mapping exists.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.1 |
nfsGroupMappingUnixGroupIDValidIndicates whether the UNIX group ID is configured user in
the nfsGroupTable.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.2 |
nfsGroupMappingUnixGroupIDThe UNIX group ID.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.3 |
nfsGroupMappingNtGroupNameThe name of the NT group for which the mapping exists.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.4 |
nfsGroupMappingNtGroupDomainNameThe NT domain name for which the mapping exists.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.3.5.2.1.5 |
nfsStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.6 |
nfsVersion2 OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.6.1 |
null2CallsThe total number of 'Null' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.1 |
getAttr2CallsThe total number of 'GetAttr' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.2 |
setAttr2CallsThe total number of 'SetAttr' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.3 |
rootCallsThe total number of 'Root' calls received since power up
NOTE: this variable is not used/implemented.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.4 |
lookup2CallsThe total number of 'Lookup' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.5 |
readLink2The total number of 'ReadLink' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.6 |
read2The total number of 'Read' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.7 |
writeCacheThe total number of 'Write Cache' calls received since power up.
NOTE : this variable is not used/implemented.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.8 |
write2The total number of 'Write' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.9 |
create2The total number of 'Create' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.10 |
remove2The total number of 'Remove' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.11 |
rename2The total number of 'Rename' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.12 |
link2The total number of 'Link' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.13 |
symLink2The total number of 'Sym Link' calls received for NFS version 2
since power up.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.14 |
mkDir2The total number of 'MkDir' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.15 |
rmDir2The total number of 'RmDir' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.16 |
readDir2The total number of 'ReadDir' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.17 |
statFS2The total number of 'StatFS' calls received for NFS version 2
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.18 |
nfsV2StatsTableThe statistics for the NFS version 2 service.
The number of entries in this table is given by the
value of clusterPNodeNumber. SEQUENCE OF NfsV2StatsEntry .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19 |
nfsV2StatsEntryThe statistics for the NFS version 2 service. NfsV2StatsEntry .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1 |
nfsV2StatsClusterNodeThe Cluster Node for this value.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.1 |
nfsV2nullCallsThe total number of 'Null' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.2 |
nfsV2getAttrCallsThe total number of 'GetAttr' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.3 |
nfsV2setAttrCallsThe total number of 'SetAttr' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.4 |
nfsV2rootCallsThe total number of 'Root' calls received since power up
NOTE: this variable is not used/implemented.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.5 |
nfsV2lookupCallsThe total number of 'Lookup' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.6 |
nfsV2readLinkThe total number of 'ReadLink' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.7 |
nfsV2readThe total number of 'Read' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.8 |
nfsV2writeCacheThe total number of 'Write Cache' calls received since power up.
NOTE : this variable is not used/implemented.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.9 |
nfsV2writeThe total number of 'Write' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.10 |
nfsV2createThe total number of 'Create' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.11 |
nfsV2removeThe total number of 'Remove' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.12 |
nfsV2renameThe total number of 'Rename' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.13 |
nfsV2linkThe total number of 'Link' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.14 |
nfsV2symLinkThe total number of 'Sym Link' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.15 |
nfsV2mkDirThe total number of 'MkDir' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.16 |
nfsV2rmDirThe total number of 'RmDir' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.17 |
nfsV2readDirThe total number of 'ReadDir' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.18 |
nfsV2statFSThe total number of 'StatFS' calls received for NFS version 2
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.1.19.1.19 |
nfsVersion3 OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.6.2 |
null3CallsThe total number of 'Null' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.1 |
getAttr3CallsThe total number of 'GetAttr' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.2 |
setAttr3CallsThe total number of 'SetAttr' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.3 |
lookup3CallsThe total number of 'Lookup' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.4 |
access3CallsThe total number of 'Access' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.5 |
readLink3The total number of 'ReadLink' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.6 |
read3The total number of 'Read' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.7 |
write3The total number of 'Write' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.8 |
create3The total number of 'Create' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.9 |
mkdir3The total number of 'MkDir' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.10 |
symLink3The total number of 'SymLink' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.11 |
mkNod3The total number of 'MkNod' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.12 |
remove3The total number of 'Remove' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.13 |
rmDir3The total number of 'RmDir' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.14 |
rename3The total number of 'Rename' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.15 |
link3The total number of 'Link' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.16 |
readDir3The total number of 'ReadDir' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.17 |
readDirPlus3The total number of 'ReadDirPlus' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.18 |
fsStat3The total number of 'FSStat' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.19 |
fsInfo3The total number of 'FSInfo' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.20 |
pathConf3The total number of 'PathConf' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.21 |
commit3The total number of 'Commit' calls received for NFS version 3
since power up.
This object is now obsolete, and is replaced with a table
of values indexed by Cluster Node and name.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.22 |
nfsV3StatsTableThe statistics for the NFS version 3 service.
The number of entries in this table is given by the
value of clusterPNodeNumber. SEQUENCE OF NfsV3StatsEntry .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23 |
nfsV3StatsEntryThe statistics for the NFS version 3 service. NfsV3StatsEntry .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1 |
nfsV3StatsClusterNodeThe Cluster Node for this value.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.1 |
nfsV3nullCallsThe total number of 'Null' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.2 |
nfsV3getAttrCallsThe total number of 'GetAttr' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.3 |
nfsV3setAttrCallsThe total number of 'SetAttr' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.4 |
nfsV3lookupCallsThe total number of 'Lookup' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.5 |
nfsV3accessCallsThe total number of 'Access' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.6 |
nfsV3readLinkThe total number of 'ReadLink' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.7 |
nfsV3readThe total number of 'Read' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.8 |
nfsV3writeThe total number of 'Write' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.9 |
nfsV3createThe total number of 'Create' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.10 |
nfsV3mkdirThe total number of 'MkDir' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.11 |
nfsV3symLinkThe total number of 'SymLink' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.12 |
nfsV3mkNodThe total number of 'MkNod' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.13 |
nfsV3removeThe total number of 'Remove' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.14 |
nfsV3rmDirThe total number of 'RmDir' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.15 |
nfsV3renameThe total number of 'Rename' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.16 |
nfsV3linkThe total number of 'Link' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.17 |
nfsV3readDirThe total number of 'ReadDir' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.18 |
nfsV3readDirPlusThe total number of 'ReadDirPlus' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.19 |
nfsV3fsStatThe total number of 'FSStat' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.20 |
nfsV3fsInfoThe total number of 'FSInfo' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.21 |
nfsV3pathConfThe total number of 'PathConf' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.22 |
nfsV3commitThe total number of 'Commit' calls received for NFS version 3
since power up.ro Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.2.23.1.23 |
nfsMountsThe total number of NFS mounts since power up.
This object is obsolete. It could not be measured.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.3 |
nfsClientsThe total number of NFS clients since power up.
This object is obsolete. It could not be measured.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.3.6.4 |
nfsService OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.3.7 |
nfsServiceEnabledIndicates whether the NFS service is enabled or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.3.7.1 |
nfsServiceMaxUsersThe maximum number of NFS users the service will allow.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.3.7.2 |
ftp OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4 |
ftpTimeoutThe FTP session timeout in minutes.
NOTE: this value applies to all FTP sessions.
This object is obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.4.1 |
ftpMountPoints OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4.2 |
ftpMountNumberThe number of FTP mount points which are configured
for the system.
This object is obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.4.2.1 |
ftpMountTableA table containing the FTP mount point configuration for the
system.
The number of entries in this table is given by the value of
ftpMountNumber.
This object is obsolete.obsolete SEQUENCE OF FtpMountEntry .1.3.6.1.4.1.11096.6.1.1.3.4.2.2 |
ftpMountEntryFTP mount point information.
This object is obsolete.obsolete FtpMountEntry .1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1 |
ftpMountNameThe name of the FTP mount point. Each FTP mount point
has a unique name.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.1 |
ftpMountNumberUsersThe number of users of the FTP mount point.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.2 |
ftpMountWWNThe world wide name (WWN) of the system drive the
FTP mount point is associated with.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.3 |
ftpMountLUNThe logical unit number (LUN) of the system drive
the FTP mount point is associated with.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.4 |
ftpMountPartitionIDThe partition ID of the volume the FTP mount point
is associated with.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.2.2.1.5 |
ftpUsers OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4.3 |
ftpUserNumberThe number of FTP users which are configured for the system.
This object is obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.4.3.1 |
ftpUserTableA table containing the FTP user configuration for the
system.
The number of entries in this table is given by the value of
ftpUserNumber.
This object is obsolete.obsolete SEQUENCE OF FtpUserEntry .1.3.6.1.4.1.11096.6.1.1.3.4.3.2 |
ftpUserEntryFTP user information.
This object is obsolete.obsolete FtpUserEntry .1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1 |
ftpUserNameThe name of the FTP user.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.1 |
ftpUserMountPointExistsIndicates whether the FTP mount point is configured in
the ftpMountTable.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.2 |
ftpUserMountPointThe name of the FTP users mount point.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.3 |
ftpUserMountInitDirectoryThe FTP users initial directory.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.3.2.1.4 |
ftpLogging OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4.4 |
ftpAuditLoggingIndicates whether FTP Audit logging is enabled or not.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.4.4.1 |
ftpAuditLogVolumeWWNThe world wide name (WWN) of the system drive the FTP
server is to write the audit log to.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.4.2 |
ftpAuditLogVolumeLUNThe logical unit number (LUN) of the system drive the
FTP server is to write the audit log to.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.4.3 |
ftpAuditLogVolumePartitionIDThe partition ID of the volume the FTP server is to
write the audit log to.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.4.4 |
ftpAuditLogDirectoryThe directory the FTP server is to write the audit log to.
This object is obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.4.4.5 |
ftpAuditLogRecordsPerFileThe number of records in each audit log file.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.4.6 |
ftpAuditMaximumLogFilesThe maximum number of audit log files.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.4.7 |
ftpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4.5 |
ftpTotalSessThe total number of FTP sessions since power up.
This object is obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.4.5.1 |
ftpTotalFtpXferInThe total number of data transfers (files) in since power up.
This object is obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.4.5.2 |
ftpBytesTotalXferInThe total number of data bytes transferred in since power up.
This object is obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.4.5.3 |
ftpTotalFtpXferOutThe total number of data transfers (files) out since power up.
This object is obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.4.5.4 |
ftpBytesTotalXferOutThe total number of data bytes transferred out since power up.
This object is obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.4.5.5 |
ftpTotalFtpCommandsThe total number of commands issued from clients since power up.
This object is obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.4.5.6 |
ftpTotalFtpRepliesThe total number of replies sent to clients since power up.
This object is obsolete.roobsolete Counter32 .1.3.6.1.4.1.11096.6.1.1.3.4.5.7 |
ftpTotalBytesCommandsThe total number of bytes received in commands since power up.
This object is obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.4.5.8 |
ftpTotalBytesRepliesThe total number of bytes set in replies since power up.
This object is obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.4.5.9 |
ftpService OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4.6 |
ftpServiceEnabledIndicates whether the FTP service is enabled or not.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.4.6.1 |
ftpServiceMaxUsersThe maximum number of FTP users the service will allow.
This object is obsolete.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.4.6.2 |
ftpSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.4.7 |
ftpNTPasswordEnabledIndicates whether FTP uses NT password authentication
or not.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.4.7.1 |
ftpNISPasswordEnabledIndicates whether FTP uses NIS password authentication
or not.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.4.7.2 |
http OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.5 |
httpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.5.1 |
httpHostVolumeWWNThe world wide name (WWN) of the system drive the
HTTP server is hosting.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.1 |
httpHostVolumeLUNThe logical unit number (LUN) of the system drive the
HTTP server is hosting.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.2 |
httpHostVolumePartitionIDThe partition ID of the volume the HTTP server is hosting.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.3 |
httpRootThe root directory the HTTP server is hosting.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.4 |
httpProductThe product string used by the HTTP server.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.5 |
httpMinTimeOutThe minimum timeout used by the HTTP server
in milliseconds.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.6 |
httpMaxTimeOutThe maximum timeout used by the HTTP server
in milliseconds.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.7 |
httpDecrTimeOutThe time the HTTP server uses to decrement the timeout on
client connection in milliseconds.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.8 |
httpIncrTimeOutThe time the HTTP server uses to increment the timeout on a
valid incoming request.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.9 |
httpMaxConnectionsThe maximum number of connections allowed by the HTTP
server.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.10 |
httpListDirectoriesIndicates whether the HTTP server list directories option
is enabled or not.
This object is now obsolete as no HTTP server is
present.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.5.1.11 |
httpLoggingIndicates whether HTTP server logging is enabled or not.
This object is now obsolete as no HTTP server is
present.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.5.1.12 |
httpMaximalLoggingIndicates whether maximal logging is enabled
or not for the HTTP server.
This object is now obsolete as no HTTP server is
present.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.5.1.13 |
httpLogVolumeWWNThe world wide name (WWN) of the system drive the
HTTP server is logging to.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.14 |
httpLogVolumeLUNThe logical unit number (LUN) of the system drive
the HTTP server is logging to.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.15 |
httpLogVolumePartitionIDThe partition ID of the volume the HTTP server is logging to.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.16 |
httpLogDirectoryThe name of the directory the HTTP server is logging to.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.17 |
httpLogRecordsPerFileThe number of records per log file the HTTP server
will generate during logging.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.18 |
httpMaximumLogFilesThe maximum number of log files the HTTP server will
generate during logging.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.19 |
httpMimeMapNumberThe number of mime map entries configured for the HTTP server.
This object is now obsolete as no HTTP server is
present.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.20 |
httpMimeMapTableA table containing the mime map configuration for the
HTTP server in the system.
The number of entries in this table is given by the value of
httpMimeMapNumber.
This object is now obsolete as no HTTP server is
present.obsolete SEQUENCE OF HttpMimeMapEntry .1.3.6.1.4.1.11096.6.1.1.3.5.1.21 |
httpMimeMapEntryMime map information.
This object is now obsolete as no HTTP server is
present.obsolete HttpMimeMapEntry .1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1 |
httpMimeMapIndexA unique value for each mime map configured for the
HTTP server in this system.
Its value ranges between 1 and the value of httpMimeMapNumber.
This object is now obsolete as no HTTP server is
present.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1.1 |
httpMimeMapExtensionThe extension on the file.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1.2 |
httpMimeMapTypeThe corresponding type the extension maps to.
This object is now obsolete as no HTTP server is
present.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.5.1.21.1.3 |
httpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.5.2 |
httpConnsAcceptedThe number of TCP/IP connections that clients have
made to the server. Clients running HTTP/1.1 can make
multiple requests per connection, and so this number will
typically be lower that the total number of requests.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.1 |
httpConnsRefusedThe total number of connections that were rejected
with a '503 Service Unavailable' message.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.2 |
httpBytesXferOutThe number of bytes sent by the server.
This includes output HTTP headers.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.3 |
httpBytesXferInThe number of bytes received by the server.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.4 |
httpGetRequestsThe number of GET requests received.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.5 |
httpHeadRequestsThe number of HEAD requests received.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.6 |
httpPutRequestsThe number of PUT requests received.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.7 |
httpPostRequestsThe number of POST requests received.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.8 |
httpStatusOKThe number of 200 OK status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.9 |
httpStatusNotModifiedThe number of 304 Not Modified status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.10 |
httpStatusPreconFailedThe number of 412 Precondition Failed status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.11 |
httpStatusBadRequestThe number of 400 Bad Request status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.12 |
httpStatusForbiddenThe number of 403 Forbidden status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.13 |
httpStatusNotFoundThe number of 404 Not Found status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.14 |
httpStatusURITooLongThe number of 414 URI Too Long status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.15 |
httpStatusServerErrorThe number of 500 Server Error status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.16 |
httpStatusNotImplementedThe number of 501 Not Implemented status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.17 |
httpStatusServiceUnavailableThe number of 503 Service Unavailable status replies.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.18 |
httpStatusOtherErrThe number of other errors occurring.
This object is now obsolete as no HTTP server is
present.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.3.5.2.19 |
httpTimeOutThe timeout period in milliseconds.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.2.20 |
httpOpenConnectionsThe number of open HTTP connections.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.2.21 |
httpActiveConnectionsThe number of active HTTP connections.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.2.22 |
httpService OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.5.3 |
httpServiceEnabledIndicates whether the HTTP service is enabled or not.
This object is now obsolete as no HTTP server is
present.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.3.5.3.1 |
httpServiceMaxUsersThe maximum number of HTTP clients the service will allow.
This object is now obsolete as no HTTP server is
present.roobsolete Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.5.3.2 |
iScsi OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.6 |
iScsiConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.6.1 |
iScsiServiceEnabledIndicates whether the iSCSI service is enabled or not.
enabled(1) The service is enabled
disabled(2) The service is not enabled
unknown(3) The service status cannot be determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.6.1.1 |
iScsiParameterTableA table containing a list of iSCSI parameters. SEQUENCE OF IScsiParameterEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.2 |
iScsiParameterEntryiSCSI parameter information. IScsiParameterEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1 |
iScsiParameterEVSThe EVS for which the Logical Unit parameters
are configured.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.1 |
iScsiParameterNameA unique name for the iSCSI parameter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.2 |
iScsiParameterIsBooleanWhether the parameter is a boolean value.
If the parameter is boolean, it will have either
the value 0 (false) or 1 (true).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.3 |
iScsiParameterValueThe value for the parameter.
If the parameter is boolean, it will have either
the value 0 (false) or 1 (true).ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.2.1.4 |
iScsiTargetNumberThe number of iSCSI targets.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.3 |
iScsiTargetTableA table containing a list of iSCSI targets.
The number of entries in this table is given by the value of
iScsiTargetNumber. SEQUENCE OF IScsiTargetEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.4 |
iScsiTargetEntryiSCSI target information. IScsiTargetEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1 |
iScsiGloballyUniqueNameA unique name for the iSCSI target.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.1 |
iScsiTargetNameThe name of the iSCSI target.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.2 |
iScsiTargetCommentThe comment for the iSCSI target.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.3 |
iScsiTargetLogicalUnitNumberThe number of Logical Units assigned
to the iSCSI target.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.4 |
iScsiTargetAuthEnabledWhether authentication is enabled for this
target.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.6.1.4.1.5 |
iScsiLogicalUnitNumberThe number of iSCSI logical units.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.5 |
iScsiLogicalUnitTableA table containing a list of iSCSI Logical Units.
The number of entries in this table is given by the value of
iScsiTargetLogicalUnitNumber in iScsiTargetTable. SEQUENCE OF IScsiLogicalUnitEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.6 |
iScsiLogicalUnitEntryiSCSI Logical Unit information.
Indexed by EVS and Logical Unit name. IScsiLogicalUnitEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1 |
iScsiLUEvsThe EVS to which the Logical Unit is assigned.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.1 |
iScsiLUNameThe name of the Logical Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.2 |
iScsiLUStatusThe status of the Logical Unit
unknown(1) - the status cannot be determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.3 |
iScsiLUCommentThe comment relating to the Logical Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.4 |
iScsiLUDeviceIdThe ID of the File System to which the Logical Unit
is assigned.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.5 |
iScsiLUPathThe path on the File System relating to the
Logical Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.6 |
iScsiLUInitializedWhether the Logical Unit is initialized.
initialized(1) - the Logical Unit is initialized
uninitialized(2) - the Logical unit is not initialized
unknown(3) - the initialization status cannot be determined.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.7 |
iScsiLUSizeThe size, in bytes, of the Logical Unit.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.3.6.1.6.1.8 |
iScsiTargetLogicalUnitTableA table containing a list of iSCSI Logical Units
assigned to iSCSI targets.
The number of entries in this table is given by the value of
iScsiTargetLogicalUnitNumber in iScsiTargetTable. SEQUENCE OF IScsiTargetLogicalUnitEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.7 |
iScsiTargetLogicalUnitEntryInformation about iSCSI Logical Units
assigned to iScsi targets.
Indexed by target name and Logical Unit name. IScsiTargetLogicalUnitEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1 |
iScsiTargetLUTargetNameThe globally unique name of the target.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1.1 |
iScsiTargetLULogicalUnitNameThe name of the Logical Unit assigned to the
target.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1.2 |
iScsiTargetLunThe Logical Unit Number allocated to the
LUN when it was assigned to the target.
This is an arbitrary number which must be unique
on the target.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.7.1.3 |
iSNSTableA table containing details of iSNS servers. SEQUENCE OF ISNSEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.8 |
iSNSEntryInformation about iSNS servers. ISNSEntry .1.3.6.1.4.1.11096.6.1.1.3.6.1.8.1 |
iSNSIpAddressThe IP address of the iSNS server.ro IpAddress .1.3.6.1.4.1.11096.6.1.1.3.6.1.8.1.1 |
iSNSPortThe port on which to connect to the iSNS
server.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.1.8.1.2 |
iScsiStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.3.6.2 |
iScsiStatisticsTableA table containing a list of iSCSI statistics. SEQUENCE OF IScsiStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.3.6.2.1 |
iScsiStatisticsEntryInformation about iSCSI statistics.
Indexed by Cluster Node id and metric name. IScsiStatisticsEntry .1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1 |
iScsiStatisticsNodeIdThe Cluster Node for this value.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1.1 |
iScsiStatisticsNameThe name of the value being reported.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1.2 |
iScsiStatisticsValueThe statistics value reported.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.3.6.2.1.1.3 |
backup OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.4 |
ndmpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.4.1 |
ndmpCurrentStatusIndicates the current status of the NDMP backup.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.4.1.1 |
ndmpEnabledOnBootIndicates whether or not NDMP is enabled at boot time.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.4.1.2 |
ndmpDevices OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.4.2 |
autoChangerNumberThe number of auto changers NDMP has detected.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.4.2.1 |
autoChangerTableA table containing a list of auto changers NDMP has
detected.
The number of entries in this table is given by the value of
autoChangerNumber. SEQUENCE OF AutoChangerEntry .1.3.6.1.4.1.11096.6.1.1.4.2.2 |
autoChangerEntryAuto changer information. AutoChangerEntry .1.3.6.1.4.1.11096.6.1.1.4.2.2.1 |
autoChangerIndexA unique value for each auto changer detected.
Its value ranges between 1 and the value of
autoChangerNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.4.2.2.1.1 |
autoChangerDeviceNameThe device name of the auto changer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.2.1.2 |
autoChangerSerialNumberThe serial number of the auto changer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.2.1.3 |
autoChangerEVSThe Enterprise Virtual Server to which this
auto changer is assigned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.2.1.4 |
tapeDriveNumberThe number of tape drives that NDMP has detected.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.4.2.3 |
tapeDriveTableA table containing a list of all tape drives NDMP has detected.
The number of entries in this table is given by the value of
tapeDriveNumber. SEQUENCE OF TapeDriveEntry .1.3.6.1.4.1.11096.6.1.1.4.2.4 |
tapeDriveEntryTape drive information. TapeDriveEntry .1.3.6.1.4.1.11096.6.1.1.4.2.4.1 |
tapeDriveIndexA unique value for each tape drive.
Its value ranges between 1 and the value of
tapeDriveNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.4.2.4.1.1 |
tapeDriveAutoChangerIndexThe index of the auto changer in the autoChangerTable
to which this tape drive is connected or -1 if it is
not associated with an auto changer.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.4.2.4.1.2 |
tapeDriveDeviceNameThe device name of the tape drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.4.1.3 |
tapeDriveSerialNumberThe serial number of the tape drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.4.1.4 |
tapeDriveLocationThe location of the tape drive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.4.1.5 |
tapeDriveEVSThe Enterprise Virtual Server to which this
tape drive is assigned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.4.2.4.1.6 |
ndmpSnapshotOptions OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.4.3 |
ndmpAutoSnapCreateEnabledDetermines whether snapshots are automatically created when
NDMP performs a backup.
enabled(1) - indicates that NDMP will create a snapshot (if one
does not already exist) when a backup is to be
performed.
disabled(2) - indicates that NDMP will not automatically
create a snapshot when a backup is to be performed.
It will take a backup of the live file system
if no snapshot exists.
unknown(3) - indicates that snapshot is disabled on this system
and the value is therefore unknown.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.4.3.1 |
ndmpAutoSnapDeleteModeIndicates whether NDMP will remove a snapshot automatically
when the backup is complete.
immediately(1) - indicates that the snapshot will be deleted
immediately after use.
whenObsolete(2) - indicates that the snapshot will be deleted
when it becomes obsolete.
unknown(3) - indicates that snapshot is disabled on this
system and the value is therefore unknown.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.4.3.2 |
ndmpAutoSnapMaxRetentionThe maximum retention time of snapshot (in days) which has been
automatically created by NDMP as a result of performing
a backup.
NOTE: this value is set to 0 if snapshot is disabled on this
system.ro Unsigned32 .1.3.6.1.4.1.11096.6.1.1.4.3.3 |
mgmnt OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5 |
systemUsers OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.1 |
systemUserNumberThe number of users which are configured to access the system
through web and telnet via password authentication.
NOTE: this does not include users which have higher level access
than supervisor.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.1.1 |
systemUserTableA table containing a list of all users configured to access the
system through web and telnet via password authentication.
NOTE: this does not include users which have higher level access
than supervisor.
The number of entries in this table is given by the value of
systemUserNumber. SEQUENCE OF SystemUserEntry .1.3.6.1.4.1.11096.6.1.1.5.1.2 |
systemUserEntrySystem user information. SystemUserEntry .1.3.6.1.4.1.11096.6.1.1.5.1.2.1 |
systemUserNameThe login name of the system user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.1.2.1.1 |
systemUserAccessLevelThe access level granted to the system user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.1.2.1.2 |
license OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.2 |
licenseKeyNumberThe number of license keys for this server.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.2.1 |
licenseKeyTableA table containing a list of license keys.
The number of entries in this table is given by the value
of licenseKeyNumber.obsolete SEQUENCE OF LicenseKeyEntry .1.3.6.1.4.1.11096.6.1.1.5.2.2 |
licenseKeyEntryLicense key information.obsolete LicenseKeyEntry .1.3.6.1.4.1.11096.6.1.1.5.2.2.1 |
licenseKeyIndexA unique value for each license key.
Its value ranges between 1 and the value of
licenseKeyNumber.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.1 |
licenseKeyStringThe license key string.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.2 |
licenseKeyValidIndicates whether the license key is valid on this
server or not.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.3 |
licenseCIFSServiceIndicates whether this license key enables the
use of the CIFS service or not.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.4 |
licenseNFSServiceIndicates whether this license key enables the use
of the NFS service or not.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.5 |
licenseFTPServiceIndicates whether this license key enables the use of
the FTP service or not.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.6 |
licenseHTTPServiceIndicates whether this license key enables the use of
the HTTP service or not.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.7 |
licenseFailoverServiceIndicates whether this license key enables the use
of the Failover service or not.
This object is obsolete: failover has been
superceded by clustering.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.8 |
licenseRAIDServiceIndicates whether this license key enables the
use of more than one RAID controller in the system
or not.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.2.2.1.9 |
licenseTableA table containing a list of valid license keys and the service(s)
they license. SEQUENCE OF LicenseEntry .1.3.6.1.4.1.11096.6.1.1.5.2.3 |
licenseEntryLicense information. LicenseEntry .1.3.6.1.4.1.11096.6.1.1.5.2.3.1 |
licenseIndexA unique value for each licensed service.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.2.3.1.1 |
licenseKeyThe license key.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.2.3.1.2 |
licenseServiceA service licensed by the given license.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.2.3.1.3 |
access OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.3 |
web OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.3.1 |
webAccessEnabledIndicates whether access to the web (GUI) interface is
permitted or not.
The setting disabled(2) indicates access to the
web interface will not be allowed regardless of any
other configuration settings for this interface.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.1.1 |
webAccessRestrictedIndicates whether access to the web interface is
restricted to the set of hostnames or IP addresses
configured in webAccessRestrictedTable or
unrestricted (such that any client may access the
web interface).
NOTE : this setting controls the use of the web access
restricted table in that there may be entries
in this table, but access to the interface will
be allowed from any host if this variable is
set to unrestricted(2).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.1.2 |
webAccessRestrictedNumberThe number of restricted web access entries
configured.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.1.3 |
webAccessRestrictedTableA table containing the hostnames or IP addresses of clients
which have restricted access to the web interface.
The number of entries in this table is given by the value of
webAccessRestrictedNumber.
This object is now obsolete.obsolete SEQUENCE OF WebAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.1.4 |
webAccessRestrictedEntryRestricted web access information.
This object is now obsolete.obsolete WebAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.1.4.1 |
webAccessRestrictedHostThe hostname or IP address of a client which has
restricted access to the web interface.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.3.1.4.1.1 |
webAccessPortNumberThe port number through which access to the web interface
is available (subject to any security restrictions).
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.1.5 |
webAccessMaxConnectionsThe maximum number of simultaneous connections which are
allowed access to the web interface.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.1.6 |
sictrl OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.3.2 |
sictrlAccessEnabledIndicates whether access to the SiCtrl
(command line) interface is permitted or not.
The setting disabled(2) indicates access to the
SiCtrl interface will not be allowed regardless of any
other configuration settings for this interface.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.2.1 |
sictrlAccessRestrictedIndicates whether access to the SiCtrl interface
is restricted to the set of hostnames or IP addresses
configured in sictrlAccessRestrictedTable or
unrestricted (such that any client may access the
SiCtrl interface).
NOTE: this setting controls the use of the SiCtrl access
restricted table in that there may be entries
in this table, but access to the interface will be
allowed from any host if this variable is set to
unrestricted(2).roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.2.2 |
sictrlAccessRestrictedNumberThe number of restricted SiCtrl access entries
configured.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.2.3 |
sictrlAccessRestrictedTableA table containing the hostnames or IP addresses of
clients which have restricted access the SiCtrl interface.
The number of entries in this table is given by the value of
sictrlAccessRestrictedNumber.obsolete SEQUENCE OF SictrlAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.2.4 |
sictrlAccessRestrictedEntryRestricted SiCtrl access information.obsolete SictrlAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.2.4.1 |
sictrlAccessRestrictedHostThe hostname or IP address of a client which has restricted
access to the SiCtrl interface.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.3.2.4.1.1 |
sictrlAccessPortNumberThe port number through which access to the SiCtrl interface
is available (subject to any security restrictions).roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.2.5 |
sictrlAccessMaxConnectionsThe maximum number of simultaneous connections which are
allowed access to the SiCtrl interface.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.2.6 |
telnet OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.3.3 |
telnetAccessEnabledIndicates whether access to the telnet interface is permitted
or not.
The setting disabled(2) indicates access to the
telnet interface will not be allowed regardless of any other
configuration settings for this interface.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.3.1 |
telnetAccessRestrictedIndicates whether access to the telnet interface is
restricted to the set of hostnames or IP addresses
configured in telnetAccessRestrictedTable or
unrestricted (such that any client may access the
telnet interface).
NOTE: this setting controls the use of the telnet access
restricted table in that there may be entries in this
table, but access to the interface will be allowed
from any host if this variable is set to
unrestricted(2).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.3.2 |
telnetAccessRestrictedNumberThe number of restricted telnet access entries
configured.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.3.3 |
telnetAccessRestrictedTableA table containing the hostnames or IP addresses of clients
which have restricted access the telnet interface.
The number of entries in this table is given by the value of
telnetAccessRestrictedNumber. SEQUENCE OF TelnetAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.3.4 |
telnetAccessRestrictedEntryRestricted telnet access information. TelnetAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.3.4.1 |
telnetAccessRestrictedHostThe hostname or IP address of a client which has
restricted access to the telnet interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.3.3.4.1.1 |
telnetAccessPortNumberThe port number through which access to the telnet interface
is available (subject to any security restrictions).ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.3.5 |
telnetAccessMaxConnectionsThe maximum number of simultaneous connections which are
allowed access to the telnet interface.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.3.6 |
secureWeb OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.3.4 |
secureWebAccessEnabledIndicates whether access to the secure web interface is permitted
or not.
The setting disabled(2) indicates access to the
secure web interface will not be allowed regardless of any other
configuration settings for this interface.
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.4.1 |
secureWebAccessRestrictedIndicates whether access to the secure web interface is
restricted to the set of hostnames or IP addresses
configured in secureWebAccessRestrictedTable or
unrestricted (such that any client may access the
secure web interface).
NOTE: this setting controls the use of the secure web access
restricted table in that there may be entries in this
table, but access to the interface will be allowed
from any host if this variable is set to
unrestricted(2).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.4.2 |
secureWebAccessRestrictedNumberThe number of restricted secure web access entries
configured.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.4.3 |
secureWebAccessRestrictedTableA table containing the hostnames or IP addresses of clients
which have restricted access the secure web interface.
The number of entries in this table is given by the value of
secureWebAccessRestrictedNumber.
This object is now obsolete.obsolete SEQUENCE OF SecureWebAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.4.4 |
secureWebAccessRestrictedEntryRestricted secure web access information.
This object is now obsolete.obsolete SecureWebAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.3.4.4.1 |
secureWebAccessRestrictedHostThe hostname or IP address of a client which has
restricted access to the secure web interface.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.3.4.4.1.1 |
secureWebAccessPortNumberThe port number through which access to the secure web interface
is available (subject to any security restrictions).
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.4.5 |
secureWebAccessMaxConnectionsThe maximum number of simultaneous connections which are
allowed access to the secure web interface.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.3.4.6 |
lcd OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.3.5 |
lcdFrontPanelLockedIndicates whether the front panel LCD on the server is locked
or not.
This object is obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.3.5.1 |
eventlog OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.4 |
eventLogNumberThe total number of events currently logged.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.4.1 |
eventLogTableA table containing a list of all Events logged
for the system.
The number of entries in this table is given by the value of
eventLogNumber.
This object is now obsolete.obsolete SEQUENCE OF EventLogEntry .1.3.6.1.4.1.11096.6.1.1.5.4.2 |
eventLogEntryEvent log information.
This object is now obsolete.obsolete EventLogEntry .1.3.6.1.4.1.11096.6.1.1.5.4.2.1 |
eventLogTimeStampThe timestamp of the event in UTC format.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.4.2.1.1 |
eventLogHandleA unique handle for the event.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.4.2.1.2 |
eventLogTextThe text describing the event.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.4.2.1.3 |
alerts OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.5 |
mailAlertConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.5.1 |
smtpAddrThe IP address or hostname of the SMTP server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.1.1 |
smtpCritFreqThe frequency at which alerts within the critical category
may be sent to the mail recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.1.2 |
smtpSevFreqThe frequency at which alerts within the severe category
may be sent to the mail recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.1.3 |
smtpWarnFreqThe frequency at which alerts within the warning category
may be sent to the mail recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.1.4 |
smtpInfoFreqThe frequency at which alerts within the information category
may be sent to the mail recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.1.5 |
smtpRecipNumberThe number of email recipients configured to receive alerts.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.1.6 |
smtpRecipTableA table containing a list of all configured mail alert
recipients for this system.
The number of entries in this table is given by the value of
smtpRecipNumber.
This object is obsolete. Superceded by smptRecipientTable.obsolete SEQUENCE OF SmtpRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.1.7 |
smtpRecipEntryMail alert recipient information.
This object is obsolete. Superceded by smtpRecipientEntry.obsolete SmtpRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.1.7.1 |
smtpRecipIndexA unique value for each configured mail recipient.
Its value ranges between 1 and the value of
smtpRecipNumber.
This table entry is obsolete. Superceded by smtpRecipientIndex.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.1.7.1.1 |
smtpRecipNameThe email address of the recipient.
This table entry is obsolete. Superceded by smtpRecipientName.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.1.7.1.2 |
smtpDiagUUencEnabledIndicates whether diagnostic emails are UU encoded
or not.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.1.8 |
smtpUndisclosedRecipNumberThe number of email recipients configured to receive
undisclosed alerts.
This object is obsolete. Undisclosed recipients are now grouped
with disclosed recipients.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.1.9 |
smtpUndisclosedRecipTableA table containing a list of all configured mail alert
recipients which are to receive undisclosed alerts
for this system.
The number of entries in this table is given by the value of
smtpUndisclosedRecipNumber.
This object is obsolete. Undisclosed recipients are now grouped
with disclosed recipients.obsolete SEQUENCE OF SmtpUndisclosedRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.1.10 |
smtpUndisclosedRecipEntryUndisclosed mail alert recipient information.
This table is obsolete. Undisclosed recipients are now
grouped with disclosed recipients.obsolete SmtpUndisclosedRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.1.10.1 |
smtpUndisclosedRecipIndexA unique value for each configured mail recipient
which is to receive undisclosed alert information.
Its value ranges between 1 and the value of
smtpUndisclosedRecipNumber.
This table entry is obsolete. Undisclosed recipients are now
grouped with disclosed recipients.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.1.10.1.1 |
smtpUndisclosedRecipNameThe email address of the recipient.
This object is obsolete. Undisclosed recipients are now
grouped with disclosed recipients.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.1.10.1.2 |
smtpRecipientTableA table containing a list of all configured mail alert
recipients for this system, whether to disclose
details in emails sent to the recipients and whether
to send empty summary emails when due.
The number of entries in this table is given by the value of
smtpRecipNumber. SEQUENCE OF SmtpRecipientEntry .1.3.6.1.4.1.11096.6.1.1.5.5.1.11 |
smtpRecipientEntryMail alert recipient information. SmtpRecipientEntry .1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1 |
smtpRecipientIndexA unique value for each configured mail recipient.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.1 |
smtpRecipientNameThe email address of the recipient.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.2 |
smtpRecipientDiscloseDisclose details in emails to this recipient.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.3 |
smtpRecipientEmptyIf there have been no events when summary emails are due
then send empty emails.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.1.11.1.4 |
winAlertConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.5.2 |
winCritFreqThe frequency at which alerts within the critical category
may be sent to the windows popup recipient(s).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.2.1 |
winSevFreqThe frequency at which alerts within the severe category
may be sent to the windows popup recipient(s).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.2.2 |
winWarnFreqThe frequency at which alerts within the warning category
may be sent to the windows popup recipient(s).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.2.3 |
winInfoFreqThe frequency at which alerts within the information category
may be sent to the windows popup recipient(s).
This object is now obsolete.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.2.4 |
winRecipNumberThe number of windows popup recipients configured to
receive alerts.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.2.5 |
winRecipTableA table containing a list of all configured windows
popup alert recipients for this system.
The number of entries in this table is given by the value of
winRecipNumber.
This object is now obsolete.obsolete SEQUENCE OF WinRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.2.6 |
winRecipEntryWindows alert recipient information.
This object is now obsolete.obsolete WinRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.2.6.1 |
winRecipIndexA unique value for each configured windows popup recipient.
Its value ranges between 1 and the value of
winRecipNumber.
This object is now obsolete.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.2.6.1.1 |
winRecipNameThe name of the windows popup recipient.
This object is now obsolete.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.2.6.1.2 |
snmpAlertConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.5.3 |
snmpCritFreqThe frequency at which alerts within the critical category
may be sent to the SNMP recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.3.1 |
snmpSevFreqThe frequency at which alerts within the severe category
may be sent to the SNMP recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.3.2 |
snmpWarnFreqThe frequency at which alerts within the warning category
may be sent to the SNMP recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.3.3 |
snmpInfoFreqThe frequency at which alerts within the information category
may be sent to the SNMP recipient(s).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.5.3.4 |
snmpRecipNumberThe number of SNMP recipients configured to receive alerts.
This object is obsolete. It has been replaced by
the object snmpTrapHostNumber.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.3.5 |
snmpRecipTableA table containing a list of all SNMP alert recipients
for this system.
The number of entries in this table is given by the value of
snmpRecipNumber.
This object is obsolete. It has been replaced by
the table object snmpTrapHostTable.obsolete SEQUENCE OF SnmpRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.3.6 |
snmpRecipEntrySNMP alert recipient information.
This object is obsolete. It has been replaced by the
object snmpTrapHostEntry.obsolete SnmpRecipEntry .1.3.6.1.4.1.11096.6.1.1.5.5.3.6.1 |
snmpRecipIndexA unique value for each configured SNMP alert recipient.
Its value ranges between 1 and the value of
snmpRecipNumber.
This object is obsolete. It has been replaced by
the object snmpTrapHostIndex.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.5.3.6.1.1 |
snmpRecipNameThe hostname or IP address of the SNMP
manager to receive the alert.
This object is obsolete. It has been replaced by
the object snmpTrapHost.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.5.3.6.1.2 |
snmpAgent OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.6 |
snmpProtocolModeIndicates the protocol to be used by the agent:
bilingual(1) - the agent will process SNMP version 1
or SNMP version 2c requests.
The protocol version used in the response
will be that used in the request.
version1(2) - the agent will only process requests made
using SNMP version 1. The response will be
sent using SNMP version 1.
version2c(3) - the agent will only process requests made using
SNMP version 2c. The response will be sent using
SNMP version 2c.
NOTE: requests made using a protocol version which does not
comply with the agents protocol configuration will
result in the badVersions statistic being incremented and
the SNMP packet being discarded.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.6.1 |
snmpAccessRestrictedIndicates whether access to the SNMP agent is restricted to
the set of hostnames or IP addresses configured in
snmpAccessRestrictedTable or unrestricted (such that any manager
may access the SNMP agent).
NOTE : this setting controls the use of the SNMP access
restricted table in that there may be entries in this
table, but access to the interface will be allowed from
any host if this variable is set to unrestricted(2).ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.6.2 |
snmpAccessRestrictedNumberThe number of configured restricted access entries.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.6.3 |
snmpAccessRestrictedTableA table containing the hostnames or IP addresses of managers
which have restricted access the SNMP agent.
The number of entries in this table is given by the value of
snmpAccessRestrictedNumber. SEQUENCE OF SnmpAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.6.4 |
snmpAccessRestrictedEntryRestricted SNMP access information. SnmpAccessRestrictedEntry .1.3.6.1.4.1.11096.6.1.1.5.6.4.1 |
snmpAccessRestrictedHostThe hostname or IP address of a manager which has restricted
access to the SNMP agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.6.4.1.1 |
snmpTrapHostNumberThe number of configured host destinations to receive traps
from the SNMP agent.
NOTE: the traps generated include alert events and:
linkUp, coldStart AND
authenticationFailure (which is controlled by the MIBII
variable snmpEnableAuthenTraps).ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.6.5 |
snmpTrapHostTableA table containing the hostnames or IP addresses of managers
which are to receive traps from the SNMP agent.
The number of entries in this table is given by the value of
snmpTrapHostNumber. SEQUENCE OF SnmpTrapHostEntry .1.3.6.1.4.1.11096.6.1.1.5.6.6 |
snmpTrapHostEntrySNMP trap host information. SnmpTrapHostEntry .1.3.6.1.4.1.11096.6.1.1.5.6.6.1 |
snmpTrapHostIndexA unique value for each trap host.
Its value ranges from 1 to snmpTrapHostNumber.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.6.6.1.1 |
snmpTrapHostThe hostname or IP address of a manager which is to receive
traps from the SNMP agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.6.6.1.2 |
versions OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.7 |
verinfoSwSystems software release information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.1 |
verinfoHwHardware release information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.2 |
verModNumberThe number of modules.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.3 |
verModTableA table containing a list of version information for each module
within the system.
The number of entries in this table is given by the value of
verModNumber. SEQUENCE OF VerModEntry .1.3.6.1.4.1.11096.6.1.1.5.7.4 |
verModEntryModule version information. VerModEntry .1.3.6.1.4.1.11096.6.1.1.5.7.4.1 |
verModIndexAn identifier for each board.
tcp(1) - the tcp board.
fsb(2) - the filesystem board.
fcp(3) - the fibre channel board.ro Enumeration .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.1 |
verModLoaderModule loader version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.2 |
verModKernelModule kernel version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.3 |
verModHwModule hardware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.4 |
verModSerialModule serial number.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.5 |
verModBuildStateModule build state.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.6 |
verModUniq0EEPROM Uniq value 0.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.7 |
verModUniq1EEPROM Uniq value 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.8 |
verModFirstDateFirst Date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.9 |
verModMTDSLastFailureLast Failure date for MTDS.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.10 |
verModMTDSFailuresManufacturing and test number of failures.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.11 |
verModMTDSLastPassManufacturing and test last pass date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.12 |
verModMTDSPassesManufacturing and test number of passes.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.13 |
verModCardIDCard identity.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.14 |
verModCardRevCard revision number.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.15 |
verModGlueRevGlue revision number.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.7.4.1.16 |
cron OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.8 |
cronJobNumberThe number of cron jobs configured to run on this system.
NOTE: this table also includes those cron jobs which are
configured to perform snapshot scheduling.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.8.1 |
cronJobTableA table containing a list of all cron jobs configured
to run on this system.
The number of entries in this table is given by the value of
cronJobNumber. SEQUENCE OF CronJobEntry .1.3.6.1.4.1.11096.6.1.1.5.8.2 |
cronJobEntryCron job information. CronJobEntry .1.3.6.1.4.1.11096.6.1.1.5.8.2.1 |
cronJobIndexA unique value for each cron job entry.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.8.2.1.1 |
cronJobDateSpecThe date specification for the cron job.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.2.1.2 |
cronJobCommandListA semi-colon separated list of commands to be run as
part of the cron job.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.2.1.3 |
cronJobMailListA semi-colon separated list of recipients who each are to
receive a copy of the output generated as a result of running
the cron job.
NOTE: This value will be a zero length string if the output
of running the job is not be emailed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.2.1.4 |
cronJobAccessLevelThe access level at which the cron job is run.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.2.1.5 |
atJobNumberThe number of at jobs configured to run on this system.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.8.3 |
atJobTableA table containing a list of all at jobs configured
to run on this system.
The number of entries in this table is given by the value of
atJobNumber. SEQUENCE OF AtJobEntry .1.3.6.1.4.1.11096.6.1.1.5.8.4 |
atJobEntryAt job information. AtJobEntry .1.3.6.1.4.1.11096.6.1.1.5.8.4.1 |
atJobIndexA unique value for each at job entry.ro Integer32 .1.3.6.1.4.1.11096.6.1.1.5.8.4.1.1 |
atJobRunTimeThe date at which the at job is scheduled to run expressed
as a local time in the format YYYY-MM-DD HH:MI (Local)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.4.1.2 |
atJobCommandListA semi-colon separated list of commands to be run as
part of the at job.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.4.1.3 |
atJobMailListA semi-colon separated list of recipients who each are to
receive a copy of the output generated as a result of running
the cron job.
NOTE: This value will be a zero length string if the output
of running the job is not be emailed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.4.1.4 |
atJobAccessLevelThe access level at which the at job is run.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11096.6.1.1.5.8.4.1.5 |
mgmntStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.9 |
webMgmntStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.9.1 |
webCurrActiveSessionsThe current number of active sessions made through
the web interface.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.1 |
webMaxSessionsThe maximum number of simultaneous sessions ever made
through the web interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.2 |
webTotalSessionsThe total number of sessions made through the web interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.3 |
webRejectedSessionsThe number of sessions which have been rejected
through the web interface since power up.
Sessions may be rejected due to either the maximum allowed
number of sessions being met or host access restrictions.
Refer to the web access variables.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.4 |
webTotalFramesTXThe total number of frames transmitted through the web interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.5 |
webTotalFramesRXThe total number of frames received through the web interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.6 |
webTotalBytesTXThe total number of bytes transmitted through the web interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.7 |
webTotalBytesRXThe total number of bytes received through the web interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.1.8 |
sictrlMgmntStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.9.2 |
sictrlCurrActiveSessionsThe current number of active sessions made through
the sictrl interface.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.1 |
sictrlMaxSessionsThe maximum number of simultaneous sessions ever made
through the sictrl interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.2 |
sictrlTotalSessionsThe total number of sessions made through the sictrl interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.3 |
sictrlRejectedSessionsThe number of sessions which have been rejected
through the sictrl interface since power up.
Sessions may be rejected due to either the maximum allowed
number of sessions being met or host access restrictions.
Refer to the sictrl access variables.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.4 |
sictrlTotalFramesTXThe total number of frames transmitted through the sictrl interface
since power up.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.5 |
sictrlTotalFramesRXThe total number of frames received through the sictrl interface
since power up.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.6 |
sictrlTotalBytesTXThe total number of bytes transmitted through the sictrl interface
since power up.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.7 |
sictrlTotalBytesRXThe total number of bytes received through the sictrl interface
since power up.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.2.8 |
telnetMgmntStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.9.3 |
telnetCurrActiveSessionsThe current number of active sessions made through
the telnet interface.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.1 |
telnetMaxSessionsThe maximum number of simultaneous sessions ever made
through the telnet interface since power up.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.2 |
telnetTotalSessionsThe total number of sessions made through the telnet interface
since power up.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.3 |
telnetRejectedSessionsThe number of sessions which have been rejected
through the telnet interface since power up.
Sessions may be rejected due to either the maximum allowed
number of sessions being met or host access restrictions.
Refer to the telnet access variables.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.4 |
telnetTotalFramesTXThe total number of frames transmitted through the telnet interface
since power up.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.5 |
telnetTotalFramesRXThe total number of frames received through the telnet interface
since power up.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.6 |
telnetTotalBytesTXThe total number of bytes transmitted through the telnet interface
since power up.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.7 |
telnetTotalBytesRXThe total number of bytes received through the telnet interface
since power up.ro Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.3.8 |
secureWebMgmntStats OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.9.4 |
secureWebCurrActiveSessionsThe current number of active sessions made through
the secure web interface.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.1 |
secureWebMaxSessionsThe maximum number of simultaneous sessions ever made
through the secure web interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.2 |
secureWebTotalSessionsThe total number of sessions made through the secure web interface
since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.3 |
secureWebRejectedSessionsThe number of sessions which have been rejected
through the secure web interface since power up.
Sessions may be rejected due to either the maximum allowed
number of sessions being met or host access restrictions.
Refer to the secureWeb access variables.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.4 |
secureWebTotalFramesTXThe total number of frames transmitted through the secure web
interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.5 |
secureWebTotalFramesRXThe total number of frames received through the secure web
interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.6 |
secureWebTotalBytesTXThe total number of bytes transmitted through the secure web
interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.7 |
secureWebTotalBytesRXThe total number of bytes received through the secure web
interface since power up.
This object is now obsolete.roobsolete Counter64 .1.3.6.1.4.1.11096.6.1.1.5.9.4.8 |
hwFlowControl OBJECT IDENTIFIER .1.3.6.1.4.1.11096.6.1.1.5.10 |
hwFlowNumberThe number of boards which permit hardware flow control.
This object is now obsolete, as Hardware Flow is only
for use by developers.roobsolete Integer32 .1.3.6.1.4.1.11096.6.1.1.5.10.1 |
hwFlowTableA table containing the hardware flow control settings
for the boards within this system.
The number of entries in this table is given by the value of
hwFlowNumber.
This object is now obsolete, as Hardware Flow is only
for use by developers.obsolete SEQUENCE OF HwFlowEntry .1.3.6.1.4.1.11096.6.1.1.5.10.2 |
hwFlowEntryHardware flow control setting information.
This object is now obsolete, as Hardware Flow is only
for use by developers.obsolete HwFlowEntry .1.3.6.1.4.1.11096.6.1.1.5.10.2.1 |
hwFlowIndexAn identifier for each board.
tcp(1) - the tcp board.
fsb(2) - the filesystem board.
fcp(3) - the fibre channel board.
This object is now obsolete, as Hardware Flow is only
for use by developers.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.10.2.1.1 |
hwFlowDebugIndicates whether hardware flow control is enabled on the
debug port (port number 0) on this board.
This object is now obsolete, as Hardware Flow is only
for use by developers.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.10.2.1.2 |
hwFlowConsoleIndicates whether hardware flow control is enabled on
the console port (port number 1) on this board.
This object is now obsolete, as Hardware Flow is only
for use by developers.roobsolete Enumeration .1.3.6.1.4.1.11096.6.1.1.5.10.2.1.3 |