BKTEL-HFC862-BES-V01-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BKTEL-HFC862-BES-V01-MIB.
82
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
bes OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114 |
RFC1155-SMI Unknown .1.3.6.1.4.1.562.3.1.114 |
besCommon OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.1 |
besCommonNumberOfModulesNumber of modules in table.ro INTEGER .1.3.6.1.4.1.562.3.1.114.1.1 |
besCommonTableThe table contains all modules of the BES-type in the NE SEQUENCE OF BesCommonEntry .1.3.6.1.4.1.562.3.1.114.1.2 |
besCommonEntryCommon-Values for a module. BesCommonEntry .1.3.6.1.4.1.562.3.1.114.1.2.1 |
besNESlotThe slot number of the chassis for which this
entry contains management information.ro NESlotValue .1.3.6.1.4.1.562.3.1.114.1.2.1.1 |
besCommonTypeThe type of physical module. modSlotEmpty indicates
an empty slot. A Value of modSlotUnknown indicates
that the type of module is unknown.ro DisplayString .1.3.6.1.4.1.562.3.1.114.1.2.1.2 |
besCommonDescrA textual description of the module.
If not available, this Value should be
set to a zero length string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.1.2.1.3 |
besCommonFirmwareIdThe firmware Id of the module.ro DisplayString .1.3.6.1.4.1.562.3.1.114.1.2.1.4 |
besCommonModuleWidthThe width of the module in multiples of slots (1, 2, ...)ro ModuleWidthValue .1.3.6.1.4.1.562.3.1.114.1.2.1.5 |
besStates OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.2 |
besStatesTable SEQUENCE OF BesStatesEntry .1.3.6.1.4.1.562.3.1.114.2.1 |
besStatesEntryAlarms for a module. BesStatesEntry .1.3.6.1.4.1.562.3.1.114.2.1.1 |
besStatesBootloaderThe device is running in bootloader mode
without a legal application software.ro PerceivedSeverityValue .1.3.6.1.4.1.562.3.1.114.2.1.1.1 |
besStatesCommLossThe NEC has lost the connection to the device.
Reason may be a removed or defective device.
Note that this state is set by the NEC and not
by the devicero PerceivedSeverityValue .1.3.6.1.4.1.562.3.1.114.2.1.1.2 |
besStatesTemperatureLowDevice temperature lowro PerceivedSeverityValue .1.3.6.1.4.1.562.3.1.114.2.1.1.3 |
besStatesTemperatureHighDevice temperature highro PerceivedSeverityValue .1.3.6.1.4.1.562.3.1.114.2.1.1.4 |
besStatesInputVoltageLowInput supply voltage lowro PerceivedSeverityValue .1.3.6.1.4.1.562.3.1.114.2.1.1.5 |
besStatesInputVoltageHighInput supply voltage highro PerceivedSeverityValue .1.3.6.1.4.1.562.3.1.114.2.1.1.6 |
besConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.3 |
besConfigurationTable SEQUENCE OF BesConfigurationEntry .1.3.6.1.4.1.562.3.1.114.3.1 |
besConfigurationEntry BesConfigurationEntry .1.3.6.1.4.1.562.3.1.114.3.1.1 |
besConfigNESlotWriteBy writing this variable a slot can be assigned
for devices that dont support hardware slot detection.
Reading '-1' means that the slot position is NOT writable.rw NESlotWriteValue .1.3.6.1.4.1.562.3.1.114.3.1.1.1 |
besConfigConfigurationIndexIndex of the active configuration (1..besDisplayNumberOfConfigs)rw INTEGER .1.3.6.1.4.1.562.3.1.114.3.1.1.2 |
besConfigConfigurationDescription of the active configurationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.3.1.1.3 |
besControl OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.4 |
besControlTable SEQUENCE OF BesControlEntry .1.3.6.1.4.1.562.3.1.114.4.1 |
besControlEntryAlarms for a module. BesControlEntry .1.3.6.1.4.1.562.3.1.114.4.1.1 |
besControlResetReset the module.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.4.1.1.1 |
besControlModuleLedBlinkWriting this variable to true(1) lets the device's
modul LED blink green for 10 seconds.
Writing this variable to false(2) stbes blinking at once.
This variable always returns false(2) on read requestsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.4.1.1.2 |
besMeasuringValues OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.5 |
besMeasuringValuesTable SEQUENCE OF BesMeasuringValuesEntry .1.3.6.1.4.1.562.3.1.114.5.1 |
besMeasuringValuesEntryCommon-Values for a module. BesMeasuringValuesEntry .1.3.6.1.4.1.562.3.1.114.5.1.1 |
besTemperatureLoLoDevice temperature low alarm threshold in 0.1 celsius degrees.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.1 |
besTemperatureLoDevice temperature low warning threshold in 0.1 celsius degrees.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.2 |
besTemperatureValueDevice temperature in 0.1 celsius degrees.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.3 |
besTemperatureHiDevice temperature high warning threshold in 0.1 celsius degrees.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.4 |
besTemperatureHiHiDevice temperature high alarm threshold in 0.1 celsius degrees.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.5 |
besInputVoltageLoLoThe input supply voltage low alarm threshold in steps of 0.1 Volts.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.6 |
besInputVoltageLoThe input supply voltage low warning threshold in steps of 0.1 Volts.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.7 |
besInputVoltageValueThe input supply voltage in steps of 0.1 Volts.
Input supply voltage nominal value, see 'besDisplayInputVoltageNominal'ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.8 |
besInputVoltageHiThe input supply voltage high warning threshold in steps of 0.1 Volts.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.9 |
besInputVoltageHiHiThe input supply voltage high alarm threshold in steps of 0.1 Volts.ro INTEGER .1.3.6.1.4.1.562.3.1.114.5.1.1.10 |
besDisplay OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.6 |
besDisplayTable SEQUENCE OF BesDisplayEntry .1.3.6.1.4.1.562.3.1.114.6.1 |
besDisplayEntry BesDisplayEntry .1.3.6.1.4.1.562.3.1.114.6.1.1 |
besDisplayNumberOfPortsThe number of portsro INTEGER .1.3.6.1.4.1.562.3.1.114.6.1.1.1 |
besDisplayInputVoltageNominalThe nominal value of input voltage in 0.1 V units.ro INTEGER .1.3.6.1.4.1.562.3.1.114.6.1.1.2 |
besDisplayNumberOfConfigsThe number of different configurations suppliedro INTEGER .1.3.6.1.4.1.562.3.1.114.6.1.1.3 |
besDisplayConfiguration1Description of configuration no. #1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.4 |
besDisplayConfiguration2Description of configuration no. #2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.5 |
besDisplayConfiguration3Description of configuration no. #3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.6 |
besDisplayConfiguration4Description of configuration no. #4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.7 |
besDisplayConfiguration5Description of configuration no. #5ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.8 |
besDisplayConfiguration6Description of configuration no. #6ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.9 |
besDisplayConfiguration7Description of configuration no. #7ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.10 |
besDisplayConfiguration8Description of configuration no. #8ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.11 |
besDisplayConfiguration9Description of configuration no. #9ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.12 |
besDisplayConfiguration10Description of configuration no. #10ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.13 |
besDisplayConfiguration11Description of configuration no. #11ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.14 |
besDisplayConfiguration12Description of configuration no. #12ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.15 |
besDisplayConfiguration13Description of configuration no. #13ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.16 |
besDisplayConfiguration14Description of configuration no. #14ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.17 |
besDisplayConfiguration15Description of configuration no. #15ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.18 |
besDisplayConfiguration16Description of configuration no. #16ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.6.1.1.19 |
besDisplayPorts OBJECT IDENTIFIER .1.3.6.1.4.1.562.3.1.114.56 |
besDisplayPortsTable SEQUENCE OF BesDisplayPortsEntry .1.3.6.1.4.1.562.3.1.114.56.1 |
besDisplayPortsEntry BesDisplayPortsEntry .1.3.6.1.4.1.562.3.1.114.56.1.1 |
besDisplayPortsPortIndexPort index (1..besDisplayNumberOfPorts)ro INTEGER .1.3.6.1.4.1.562.3.1.114.56.1.1.1 |
besDisplayPortsPortNamePort namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.56.1.1.2 |
besDisplayPortsTypePort typero PortType .1.3.6.1.4.1.562.3.1.114.56.1.1.3 |
besDisplayPortsLinkStatePort link statusro PortLinkState .1.3.6.1.4.1.562.3.1.114.56.1.1.4 |
besDisplayPortsStatusPort statusro PortStatus .1.3.6.1.4.1.562.3.1.114.56.1.1.5 |
besDisplayPortsDuplexModePort duplex modero PortDuplexMode .1.3.6.1.4.1.562.3.1.114.56.1.1.6 |
besDisplayPortsSpeedPort speedro PortSpeed .1.3.6.1.4.1.562.3.1.114.56.1.1.7 |
besDisplayPortsFlowControlPort speedro PortFlowControl .1.3.6.1.4.1.562.3.1.114.56.1.1.8 |
besDisplayPortsFiberTxDistancePort transmission distance in units of km (Fiber ports only)ro INTEGER .1.3.6.1.4.1.562.3.1.114.56.1.1.9 |
besDisplayPortsFiberTxWavelenPort transmission wavelength in units of nm (Fiber ports only)ro INTEGER .1.3.6.1.4.1.562.3.1.114.56.1.1.10 |
besDisplayPortsFiberRxWavelenMinPort minimum receive wavelength in units of nm (Fiber ports only)ro INTEGER .1.3.6.1.4.1.562.3.1.114.56.1.1.11 |
besDisplayPortsFiberRxWavelenMaxPort maximum receive wavelength in units of nm (Fiber ports only)ro INTEGER .1.3.6.1.4.1.562.3.1.114.56.1.1.12 |
besDisplayPortsFiberSfpDataPort SFP data text (Fiber ports only)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.3.1.114.56.1.1.13 |