BICC-TrmSvr
Detailed view of the defined objects, syntax rules, and hierarchical paths.
337
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
337 total| Object Name |
|---|
bicc OBJECT IDENTIFIER .1.3.6.1.4.1.170 |
RFC1155-SMI Unknown .1.3.6.1.4.1.170 |
bdn OBJECT IDENTIFIER .1.3.6.1.4.1.170.1 |
devices OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1 |
terminal-server OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.1 |
server OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.2 |
service OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.3 |
slot OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.4 |
serverAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5 |
serverDevice OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.1 |
vcpServerDevice OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.1.1 |
serverProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.2 |
protNone OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.2.1 |
protTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.2.2 |
protRlogin OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.2.3 |
protLt OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.5.2.4 |
serverMibs OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6 |
vcpServerMib OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1 |
vcpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.1 |
vSysIdentifierA unique identifier of the server type. The OID is
one of those found under { serverDevice }, such as
{ vcpServerDevice }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.1.1 |
vSysRebootA control to reinitialize the server. In response to a
get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes the server to reboot.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.2 |
vSysLtGroupStatusAn integer indicating whether the vcpLt group is
implemented on this particular unit. That entire group
has a status of optional, as some software configurations
executing in a server unit may not implement the
group. For example, the group is not implemented in a
unit which is configured without the Lat-compatible
protocol, and in this case the value of vSysLtGroupStatus
is absent(2). This variable gives management stations an
easy way to determine whether the group is implemented in
the particular unit being managed.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.3 |
vSysPrimaryBootThe primary boot method of the server. This boot method
is attempted first on system re-initialization.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.4 |
vSysSecondaryBootThe secondary boot method of the server. This boot
method is attempted on system re-initialization when the
primary boot method fails.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.5 |
vSysBootFilePathThe pathname on the remote boot host of the server's
boot file for boot through TFTP.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.1.6 |
vSysBootFileNameThe filename of the server's boot file for boot through
MOP, TFTP, or Card.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.1.7 |
vSysBootServerThe IP address of the boot server for boot through
TFTP or BOOTP. A value of '0.0.0.0' (on read or write)
indicates that no boot server is defined.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.1.8 |
vSysRemoteBootIndicates whether this server will supply system
software as a boot image for remote servers when they
request a network boot.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.9 |
vSysEtherTypeSelects the operating ethernet interface.
'autoSelect(1)' indicates that the server will
automatically select an interface by identifying that
interface showing network activity. Note that the
server must be rebooted before a change in the value of
this variable actually takes effect.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.10 |
vSysBroadbandDetermines whether or not the server is configured to
interface with with broadband network tranceivers. Note
that the server must be rebooted before a change in the
value of this variable actually takes effect.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.1.11 |
vSysPasswordLimitDetermines the number of times the server will allow a
user to mistype a local password, either to login to
a port or connect to a local service, before refusing
the login attempt. The value 0 indicates infinite
password attempts.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.1.12 |
vSysPrivPasswordThe password required for users to enter privileged
mode, and have access to privileged commands. Note that
on a set-request, the new value is automatically
converted to upper-case, as is the user password input.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.1.13 |
vSysMaintenancePasswordThe password required for access to the server remote
console port through the MOP network protocol.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.1.14 |
vcpPort OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.2 |
vPortBroadcastDetermines whether or not port users may broadcast
text directly to other ports, using the local
'BROADCAST' command.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.1 |
vPortInactivityTimerThe number of minutes that may pass with no port
activity before that port is automatically logged out,
if the port's inactivity logout feature is enabled.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.2 |
vPortAbsoluteTimerThe number of minutes that may pass with no port
activity before that port is automatically logged out,
if the port's absolute logout feature is enabled.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.3 |
vPortLockDetermines whether or not the server will allow a user
to lock a port using the local 'LOCK' command.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.4 |
vPortLoginPasswordThe password required for users to login ports with
vPortPasswordEnable = 'enabled(1)'. On a set-request
the agent converts lower case ASCII characters to upper
case for this object, because the user's password input
is also converted before comparison.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.5 |
vPortConsoleIndexThe value of vPortIndex for the port which is serving
as the local console port. Abnormal event messages are
automatically directed to the local console port. A
value of 0 indicates that console messages are disabled.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.6 |
vPortFailoverDetermines whether or not the port failover feature is
enabled.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.7 |
vPortSignalCheckDetermines whether or not the port signal check
feature can be enabled for individual ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.8 |
vPortLoginMsgEnableDetermines whether or not the server prints an
introductory login message to the user when the user
completes a login to a port.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.9 |
vPortBreakDurationDetermines the length, in milliseconds, of a BREAK
when transmitted from a physical port.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.10 |
vPortXoffMarkDetermines the number of free bytes in a port input
buffer at which point the port will XOFF the attached
device. When set, the new value will not take effect
until the server is re-initialized.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.11 |
vPortXonMarkDetermines the number of used bytes in a port input
buffer at which point the port will XON the attached
device. When set, the new value will not take effect
until the server is re-initialized.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.12 |
vPortNumberAn integer indicating the number of entries in
vPortTable. This value cannot change from one
re-initialization of the unit to the next
re-initialization.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.13 |
vPortTableA list of port entries. The number of entries is given
by the value of vPortNumber. SEQUENCE OF VPortEntry .1.3.6.1.4.1.170.1.1.2.6.1.2.14 |
vPortEntryStatus and parameter values for a port. VPortEntry .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1 |
vPortIndexA unique value for each port. Its value ranges between
1 and the value of vPortNumber. The value for each port
will remain constant at least from one re-initialization
of the unit's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.1 |
vPortTypeAn integer indicating the type of the port. Virtual
ports should be considered communication channels to
their particular interface. For example, a virtualX25(7)
port is a channel to an X.25 interface for establishing
connections to/from that interface.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.2 |
vPortNameA textual name for the port. This name is used in
LAT-compatible session start requests, where a device can
request to be connected to a port with a given name. On
a set-request the agent converts lower case ASCII
characters to upper case for this object. Note that for
ports with vPortType = 'physicalLCDPanel(5)' or vPortType
= 'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.3 |
vPortUserNameThe textual username typed in by the user who logged
into the port.ro DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.4 |
vPortStateThe current operational state of the port. 'idle(2)'
indicates that the port has no sessions and is logged
out. 'local(3)' indicates that the port is currently
in local server mode, although suspended sessions may
exist on the port. 'connecting(4)' indicates that the
server is attempting to connect the port to a session.
'connected(5) indicates that the port is currently
connected to a protocol session. 'locked(6)' indicates
that the port has been locked by a local LOCK command and
is awaiting the unlock password. 'serial-interface(7)'
indicates that the port is acting as an interface for
a serial link controlled by SLIP, PPP, etc.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.5 |
vPortLogoutA control to logout a port. In response to a
get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes all sessions on the port to be
disconnected and the port is returned to idle state.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.6 |
vPortActiveSessionsThe number of presently active sessions on the port,
whether current or suspended.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.7 |
vPortCurrSessNumberThe reference number of the port's current session.
There is a unique non-zero reference number for each
session on a port. The reference number stays constant
for the life of the session. It can be used in
conjunction with vPortIndex to index into the appropriate
session table for retrieval of session information
(vTelSessTable, vLtSessTable, or vRlogSessTable). If
there are no sessions on the port, or if none of them is
current, this object will have the value 0.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.8 |
vPortCurrSessProtAn identifier of which higher-level protocol the current
port session is running over. The possibilities are
{ protNone } (for no current session, or unknown),
{ protTelnet }, { protRlogin }, or { protLt }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.9 |
vPortAccessAn indication of the allowed types of access to the
port. 'local(1)' indicates that the port can only carry
sessions initiated by it. 'remote(2)' indicates that the
port can only accept connections initiated by another
entity. 'dynamic(3)' indicates that the port can both
initiate sessions and accept connections initiated by
another entity. 'none(4)' indicates that the port can
not pass any characters, and can neither initiate nor
accept connections. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.10 |
vPortVirtualEnableAn indication of the current setting of the port's
virtual characteristic. This parameter affects the
port's actions when connections are established. Refer
to the user manual for a complete description of this
parameter. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.11 |
vPortVirtualStringAn indication of the current setting of the port's
virtual text string. This parameter affects the
port's actions when connections are established. Refer
to the user manual for a complete description of this
parameter. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.12 |
vPortSessionLimitThe maximum number of simultaneous sessions allowed on
the port. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept
any valid value on a set-request for such ports.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.13 |
vPortProfileThe name of the profile in use for the port. The
profile contains session parameter information for Telnet
and Rlogin. When the port initiates a Telnet or Rlogin
session, the parameters to be used for that session are
taken from the port's profile. vPortProfilename can be
used to index into the profile table and retrieve/modify
the relevant parameters. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.14 |
vPortQueueingAn indication of whether the LAT-compatible protocol
will request session queueing when attempting to
establish a session initiated at this port. If queueing
is requested, a remote node will queue the connection
request in the case of resource failures and accept the
session when it is able. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.15 |
vPortPasswordEnableAn indication of whether the system password must be
entered to login to the port. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.16 |
vPortTacacsEnableAn indication of whether the username and password
entered at login must be verified by a Tacacs server
before port access is permitted. Note for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.17 |
vPortSecurityEnableAn indication of whether the port security feature
is enabled. Ports for which security is enabled are
allowed to execute only a limited subset of the
available local commands. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.18 |
vPortGroupsIndicates which LAT-compatible groups are authorized
and currently enabled on the port. There are 256
possible LAT-compatible groups (0-255). Note that for
ports with vPortType = 'physicalLCDPanel(5)' or vPortType
= 'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw LtGroupList .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.19 |
vPortBreakModeAn indication of how a BREAK is interpreted when
received at the port as input. 'local(1)' indicates that
a received BREAK causes any current session to be
suspended and the port returned to local mode. If there
is no current session, the BREAK causes any port output
in progress to be aborted. 'remote(2)' indicates that a
received BREAK is passed through the current session to
the other side via a protocol-specific mechanism. If
there is no current session, the BREAK causes any port
output in progress to be aborted. 'disabled(3)'
indicates that all received BREAKs are ignored. Note
that for ports with vPortType = 'physicalLCDPanel(5)' or
vPortType = 'virtualConsole(6)' this object is not
modifiable. The agent will accept any valid value on
a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.20 |
vPortBackSwitchA 'hot' key which, when received at the port's input,
causes the current session to be changed to the
immediately preceding session (from session 3 to session
2, for example). A value of 0 means that no backwards
switch is in effect. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept
any valid value on a set-request for such ports.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.21 |
vPortForwSwitchA 'hot' key which, when received at the port's input,
causes the current session to be changed to the
next numerical session (from session 3 to session
4, for example). A value of 0 means that no forwards
switch is in effect. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept
any valid value on a set-request for such ports.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.22 |
vPortLocalSwitchA 'hot' key which, when received at the port's input,
forces the port to suspend any current session and return
to local mode. If no current session exists, any port
output currently in progress is aborted. A value of 0
means that no local switch is in effect. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.23 |
vPortPrefSvcA string defining the port's preferred service. A user
at the port does not need to specify the service name (or
node address) to connect to the service, he simply
executes the connect command. Alternately, the port may
connect to this service immediately upon being logged in
from an idle state. The exact mode of operation depends
on the setting of vPortPrefMode. A zero-length value for
this object means that no preferred service is in
effect. Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.24 |
vPortPrefNodeA string defining the node name for the port's preferred
service. Multiple LAT-compatible nodes may offer the
same service name. This object defines which node is the
preferred choice for the port. A zero-length value for
this object means that no preferred node is in effect.
Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.25 |
vPortPrefPortA string defining the port name for the port's preferred
service. For LAT-compatible services this string
identifies the LAT-compatible port name of the desired
destination. For IP hosts this string defines the
desired TCP port number. A zero-length value means that
no preferred port is in effect. Note that for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.26 |
vPortPrefModeAn indication of the mode of preferred service
connection. 'preferred(2)' indicates the 'preferred'
mode of connection. In this mode users may break back to
local mode by means of the BREAK key or a defined local
switch. 'dedicated(3)' indicates that the port cannot
function in local mode at all. It is dedicated to the
specified service. Once the service connection is
broken, the port is logged out. When the port is logged
in, it immediately connects to the dedicated service.
Note that for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.27 |
vPortAutoConnectA port characteristic which, when enabled, causes the
port to automatically attempt to re-establish any
connection which is abnormally terminated, such as by
network media failure. If a preferred service is also
defined, the port will automatically attempt connection
to the preferred service upon login. Note for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.28 |
vPortPromptThe prompt string for the port when it is in local
mode. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.29 |
vPortInactiveLogoutA port characteristic which, when enabled, causes the
port to automatically become logged out if it has no
active sessions and no data has been received or
transmitted at the port for the duration of the
vSysInactivityTimer. Note for ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
this object is not modifiable. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.30 |
vPortAutoPromptA port characteristic which, when enabled, causes the
LAT-compatible service prompt to appear at the port
immediately upon connecting to a LAT-compatible service.
Many LAT-compatible services do not supply a prompt until
a carriage return is encountered. Note that for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.31 |
vPortBroadcastEnableA port characteristic which, when enabled, allows
characters broadcast from other server ports to appear
at the port. If disabled, such broadcasts are not
permitted to the particular port. Note for ports with
vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.32 |
vPortInterruptsA port characteristic which, when enabled, allows
a remote connection to the port to be interrupted by a
local user by means of the BREAK key. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.33 |
vPortMessageCodesA port characteristic which, when enabled, causes
a message code reference number to be generated along
with any port status or error messages. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.34 |
vPortVerificationA port characteristic which, when enabled, causes
a status message to appear on each connection attempt by
the port. The status message indicates success or
failure of the connection and provides the session number
of the newly established session. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.35 |
vPortDialupA port characteristic which, when enabled, causes the
server to identify that the port is configured for modem
dial-in service when it connects to a LAT-compatible
service. This may cause the service to initiate any
security features it chooses to verify the authority or
source of the connecting user. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.36 |
vPortRemoteModifyA port characteristic which, when enabled, causes the
server to allow modification of local port parameters
(speed, character size, parity, etc.) from the remote
end of the connection through protocol-specific means.
Note for ports with vPortType = 'physicalLCDPanel(5)' or
vPortType = 'virtualConsole(6)' this object is not
modifiable. The agent will accept any valid value on a
set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.37 |
vPortAbsoluteLogoutA port characteristic which, when enabled, causes the
port to automatically become logged out if no data has
been received or transmitted at the port for the duration
of the vSysAbsoluteTimer, regardless of the presence of
suspended sessions on the port. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.38 |
vPortIOflushA port characteristic which, when enabled, causes the
server to automatically flush the port's output buffer
when the port becomes logged out. Note for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.39 |
vPortLogoutMsgEnableA port characteristic which, when enabled, causes the
port to print a message whenever it becomes logged out.
Note for ports with vPortType = 'physicalLCDPanel(5)' or
vPortType = 'virtualConsole(6)' this object is not
modifiable. The agent will accept any valid value on a
set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.40 |
vPortScreenTypeA port characteristic which determines the type of
output device connected to the port, and therefore
determines the output data formatting used for server
configuration and statistics screens. 'ansi(1)'
indicates that ANSI-compatible screen formatting
sequences may be used. 'softcopy(2)' specifies that
VT-100 screen formatting sequences may be used.
'hardcopy(3)' indicates that no screen-formatting
sequences may be used. Note that for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.41 |
vPortFlowTypeThe port's type of flow control. 'none(1)' indicates
that no flow control is in effect. 'xonXoff(2)'
indicates software flow control by recognizing XON and
XOFF characters. 'hardware(3)' indicates flow control
delegated to the lower level, for example a parallel
port. 'ctsRts(4)' and 'dsrDtr(5)' are specific to ports
with vPortType = 'physicalRS-232(2) or
'physicalRS-423(3)'.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.42 |
vPortInFlowStateThe current operational state of input flow control on
the port. 'none' indicates not applicable. 'unknown'
indicates this level does not know. 'stop' indicates
flow not allowed. 'go' indicates flow allowed.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.43 |
vPortOutFlowStateThe current operational state of output flow control on
the port. 'none' indicates not applicable. 'unknown'
indicates this level does not know. 'stop' indicates
flow not allowed. 'go' indicates flow allowed.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.44 |
vPortCTSstateThe current state of the port's CLEAR-TO-SEND input.
'none(1)' indicates that the port has no CTS input.
'unknown(4)' indicates that the state of the input signal
is unavailable to this software level.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.45 |
vPortDSRstateThe current state of the port's DATA-SET-READY input.
'none(1)' indicates that the port has no DSR input.
'unknown(4)' indicates that the state of the input signal
is unavailable to this software level.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.46 |
vPortDCDstateThe current state of the port's DATA-CARRIER-DETECT
input. 'none(1)' indicates that the port has no DCD
input. 'unknown(4)' indicates that the state of the
input signal is unavailable to this software level.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.47 |
vPortDTRstateThe current state of the port's DATA-TERMINAL-READY
output. 'none(1)' indicates that the port has no DTR
output. 'unknown(4)' indicates that the state of the
output signal is unavailable to this software level.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.48 |
vPortRIstateThe current state of the port's RING-INDICATOR
input. 'none(1)' indicates that the port has no RI
input. 'unknown(4)' indicates that the state of the
input signal is unavailable to this software level.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.49 |
vPortRTSstateThe current state of the port's REQUEST-TO-SEND
output. 'none(1)' indicates that the port has no RTS
output. 'unknown(4)' indicates that the state of the
output signal is unavailable to this software level.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.50 |
vPortSpeedThe serial baud rate of the port. 'none(1)' indicates
that the port is not a physical serial port. The agent
will accept any valid value on a set-request for such
ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.51 |
vPortCharSizeThe size of serial characters transmitted/received at
the port, excluding parity and stop bits. 'none(1)'
indicates that the port is not a physical serial port.
The agent will accept any valid value on a set-request
for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.52 |
vPortParityTypeThe type of parity used for serial transmission and
reception of characters at the port. 'not-applicable(1)'
indicates that the port is not a physical serial port.
The agent will accept any valid value on a set-request
for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.53 |
vPortAutobaudIndicates whether the port will automatically attempt
to autobaud to an external serial device after being
logged out. 'not-applicable(3)' indicates that the port
is not a physical serial port. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.54 |
vPortModemControlIndicates whether the port modem control characteristic
is enabled. When enabled, a physical serial port will
not function unless modem signals are asserted, and the
port's DTR output is dropped for 5 seconds each time the
port gets logged out. 'not-applicable(3)' indicates that
the port is not a physical serial port. The agent will
accept any valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.55 |
vPortDSRlogoutIndicates whether the port DSRlogout characteristic
is enabled. When enabled, a physical serial port will
automatically be logged out when the DSR input is
dropped. 'not-applicable(3)' indicates that the port is
not a physical serial port. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.56 |
vPortRingIndicates whether the port ring characteristic is
enabled. When enabled, a physical serial port will
raise and lower its RTS output and wait for the DSR input
to be raised before accepting a remote connection
request. 'not-applicable(3)' indicates that the port is
not a physical serial port. The agent will accept any
valid value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.57 |
vPortDTRwaitIndicates whether the port DTRwait characteristic is
enabled. When enabled, a physical serial port will
delay asserting its DTR and RTS outputs until the RI
input signal is asserted. 'not-applicable(3)' indicates
that the port is not a physical serial port. The agent
will accept any valid value on a set-request for such
ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.58 |
vPortSignalCheckEnableIndicates whether the port signal check characteristic
is enabled. When enabled, a physical serial port will
check for the assertion of the DSR input signal before
accepting a remote connection request.
'not-applicable(3)' indicates that the port is not a
physical serial port. The agent will accept any valid
value on a set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.59 |
vPortHandshakeOn some server units the physical serial ports have
connectors which do not allow both the CTS and RI
input signals. This object indicates how the input
signal is to be interpreted. 'not-applicable(3)'
indicates that the port is not a physical serial port, or
that the serial port can accept both the CTS and RI input
signals. The agent will accept any valid value on a
set-request for such ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.60 |
vPortRcvCharsTotal number of characters detected as input from
the port since system re-initialization, including
locally-processed input, and input sent to all sessions.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.61 |
vPortTrnCharsTotal number of characters detected as output from
the port since system re-initialization, including
locally-creating output, and output received from all
sessions.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.62 |
vPortFrameErrsTotal number of received characters which were rejected
because a framing error was detected. This counter only
applies to physical serial ports. The value 0 will be
returned for all other ports.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.63 |
vPortOverrunErrsTotal number of received characters which were rejected
for lack of character FIFO space on the serial
communication controller. This counter only applies to
physical serial ports. The value 0 will be returned for
all other ports.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.64 |
vPortParityErrsTotal number of received characters which were rejected
because a parity error was detected. This counter only
applies to physical serial ports. The value 0 will be
returned for all other ports.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.65 |
vPortCharsDroppedTotal number of received characters which were rejected
for any reason not covered in other objects, for example
lack of input buffer space. This counter only applies
to physical serial ports. The value 0 will be returned
for all other ports.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.66 |
vcpService OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.3 |
vSvcRatingModeDetermines the method of computation for the rating
of local services. 'scaled(2)' indicates that an
algorithm is used where the rating is scaled to be
between 0 and 255. 'unScaled(1)' indicates that the
service rating is equal to the number of available
service ports.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.1 |
vSvcCurrNumberAn integer indicating the current number of entries in
vSvcTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.3.2 |
vSvcTableA list of service entries. The number of entries is
given by the value of vSvcCurrNumber. SEQUENCE OF VSvcEntry .1.3.6.1.4.1.170.1.1.2.6.1.3.3 |
vSvcEntryStatus and parameter values for a service. VSvcEntry .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1 |
vSvcNameA string which identifies the service uniquely among
all other local services configured in the unit. This
name is transmitted as part of the unit's LAT-compatible
multicast messages. On a set-request the string is
automatically converted to upper-case, as lower-case
service names are not allowed on the server.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.1 |
vSvcPortsA 32-byte string which represents a bit map of which
server ports are enabled for the service. Each server
port is represented by one bit in the 32 bytes. If the
bit is turned on, the corresponding server port is
enabled for the service. The least significant bit of
each byte represents the lowest of the ports for that
byte. For example, port 1 (port with vPortIndex = 1) is
represented by the least significant bit of the first
byte, and port 16 (port with vPortIndex = 16) is
represented by the most significant bit of the second
byte, etc. Note that 32 bytes allows for up to 256
ports. For servers configured with less than 256 ports,
all bits above the highest port number must always be
zero. Note also that ports with vPortType =
'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)'
cannot be enabled on a service.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.2 |
vSvcIdentA locally-administered identification string which is
associated with the service and is transmitted as part of
the unit's LAT-compatible multicast messages.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.3 |
vSvcRatingAn integer indicating the ability for connections to
this service to be accepted by the server. The higher
the value, the more able the server is to accept
connections to this service. A very low value indicates
that the resources for this service are close to
exhausted. The most dominant factor for determining the
service rating is the number of idle ports which are
enabled for the service. If a service has no idle ports
enabled, its rating is zero. This number is transmitted
as part of the unit's LAT-compatible multicast messages.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.4 |
vSvcLtEnableIndicates whether the server will accept connections to
this service over the LAT-compatible protocol.
'disabled(2)' indicates that LAT-compatible connections
will not be accepted.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.5 |
vSvcTelEnableIndicates whether the server will accept connections to
this service over the Telnet protocol. 'disabled(2)'
indicates that Telnet connections will not be accepted.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.6 |
vSvcLprEnableIndicates whether the server will accept connections to
this service over the LPR line printer protocol.
'disabled(2)' indicates that LPR connections will not be
accepted.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.7 |
vSvcRawEnableIf enabled(1), indicates that the server will not
interpret Telnet interesting characters when a Telnet
connection is established to the service.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.8 |
vSvcVirtualEnableIndicates whether the virtual characteristic is enabled
or not on this service. Refer to the user manual for
more information on the service virtual characteristic.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.9 |
vSvcVirtualTextDefines the virtual text string for this service. Refer
to the user manual for more information on the function
of the service virtual text string.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.10 |
vSvcConnectEnableIndicates whether connections are presently being
accepted for this service or not. It is a way of
temporarily turning off the service without deleting it
from the table.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.11 |
vSvcPasswordDefines the password that must be correctly supplied
before a session to this service can be established. a
zero-length value indicates that no password must be
supplied. Note that on a set-request, the new value is
automatically converted to upper-case, as is the user
password input.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.12 |
vSvcQueueEnableIndicates whether or not the server will queue
connection requests to the service if it is unavailable.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.13 |
vSvcIpAddrIndicates the only IP address upon which the service
will carry TCP sessions. This is used when the server
has multiple IP addresses and it is desired that the
service only respond to connection requests on one of
those addresses. A value of 0.0.0.0 indicates that any
of the server's IP addresses can be used to connect to
this service.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.14 |
vSvcTcpPortIndicates the TCP port on which this service accepts
TCP connections. A value of zero normally means that
no TCP port has been assigned.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.15 |
vSvcProfileIndicates the profile entry in the vProfTable which is
used to determine Telnet parameters when a Telnet
connection is accepted to the service. A zero-length
value indicates that only default profile parameter
values will be used.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.16 |
vSvcStatusThe current status of this service entry. Setting this
object to the value invalid(2) has the effect of deleting
the entry from the service table.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.17 |
vcpProfile OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.4 |
vProfCurrNumberAn integer indicating the current number of entries in
vProfTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.1 |
vProfTableA list of profile entries. The number of entries is
given by the value of vProfCurrNumber. SEQUENCE OF VProfEntry .1.3.6.1.4.1.170.1.1.2.6.1.4.2 |
vProfEntryParameter values for a profile entry. VProfEntry .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1 |
vProfNameA unique string value for each profile.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.1 |
vProfDomainA domain name extension that may be appended to a
user-specified hostname with which the user wishes to
start a session. For example, if the user's port profile
has a vProfDomain of 'dss.com', and the user attempts to
start a session to the specified host 'pluto,' the server
will first attempt to resolve the hostname 'pluto,' and
if this is unsuccessful it will then attempt to resolve
the hostname 'pluto.dss.com.' This automatic appending
of domain extension is only attempted if the value of
vProfConcatenate is 'enabled(1).' A zero-length value
indicates that no extension is used.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.2 |
vProfConcatenateAn indication of whether the server will append the
value of vProfDomain to a user-specified hostname when
the user wishes to start a session to the host (see
vProfDomain). 'enabled(1)' indicates that the server
will attempt to resolve the concatenated hostname if the
unconcatenated hostname cannot be resolved to an IP
address. 'disabled(2)' indicates that the server will
not attempt the hostname concatenization.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.3 |
vProfPermHostOnlyAn indication of whether the server will attempt to
resolve a user-specified hostname through the network
nameserver protocol for ports with this profile.
'disabled(1)' indicates that the server will
automatically attempt to resolve an unknown
user-specified hostname. 'enabled(2)' indicates that if
the user-specified hostname is not already in the
hostname table, the server will not attempt to resolve it
through the nameserver protocol.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.4 |
vProfTcpPortThe default remote TCP port to which the server will
attempt to connect when a user starts a Telnet/Rlogin
session on a port with this profile.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.5 |
vProfTcpTimeoutThe maximum number of seconds TCP will wait for an
acknowledgement before terminating the session.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.6 |
vProfTcpKeepaliveThe number of seconds that the sessions intiated with
this profile may remain idle (no characters transmitted
or recieved) before a TCP keepalive message is generated.
A value of 0 indicates that keepalive messages are never
generated.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.7 |
vProfIpTTLThe value of the IP time to live on packets transmitted
for sessions initiated with this profile.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.8 |
vProfIpPrecedenceThe value of the IP precedence on packets transmitted
for sessions initiated with this profile.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.9 |
vProfTermTypeThe terminal type that Telnet/Rlogin will attempt to
negotiate with the remote node for sessions initiated
with this profile. A zero-length value indicates that
no terminal type is negotiated.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.10 |
vProfCrToNetThe character sequence which is sent by Telnet to the
remote node to indicate a carriage return in the data
stream for sessions initiated with this profile.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.11 |
vProfCrFromTermThe local character sequence which, when delivered to
Telnet for transmission, is interpreted as a carriage
return and translated to the sequence indicated by
vProfCrToNet for sessions initiated with this profile.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.12 |
vProfPadCharThe character used by the local Telnet implementation
to pad transmitted data immediately following a carriage
return for sessions initiated with this profile. A value
of 0 indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.13 |
vProfPadLengthThe number of pad characters inserted into the data
stream by the local Telnet implementation immediately
following a carriage return for sessions initiated with
this profile.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.14 |
vProfEndRecordThe local character which, when delivered to Telnet for
transmission, is interpreted as an end-of-record
character and translated to the appropriate Telnet
control function for sessions initiated with this
profile. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.15 |
vProfNopThe local character which, when delivered to Telnet for
transmission, is interpreted as a no-op character and
translated to the appropriate Telnet control function for
sessions initiated with this profile. A value of 255
indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.16 |
vProfDataMarkThe local character which, when delivered to Telnet for
transmission, is interpreted as a data mark character and
translated to the appropriate Telnet control function for
sessions initiated with this profile. A value of 255
indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.17 |
vProfBreakThe local character which, when delivered to Telnet for
transmission, is interpreted as a break character and
translated to the appropriate Telnet control function for
sessions initiated with this profile. A value of 255
indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.18 |
vProfIntProcessThe local character which, when delivered to Telnet for
transmission, is interpreted as the interrupt process
character and translated to the appropriate Telnet
control function for sessions initiated with this
profile. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.19 |
vProfAbortOutputThe local character which, when delivered to Telnet for
transmission, is interpreted as the abort output
character and translated to the appropriate Telnet
control function for sessions initiated with this
profile. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.20 |
vProfAttentionThe local character which, when delivered to Telnet for
transmission, is interpreted as the attention character
and translated to the appropriate Telnet control
function for sessions initiated with this profile. A
value of 255 indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.21 |
vProfEraseCharThe local character which, when delivered to Telnet for
transmission, is interpreted as the backspace character
and translated to the appropriate Telnet control
function for sessions initiated with this profile. A
value of 255 indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.22 |
vProfEraseLineThe local character which, when delivered to Telnet for
transmission, is interpreted as the erase line character
and translated to the appropriate Telnet control function
for sessions initiated with this profile. A value of 255
indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.23 |
vProfGoAheadThe local character which, when delivered to Telnet for
transmission, is interpreted as the go ahead character
and translated to the appropriate Telnet control function
for sessions initiated with this profile. A value of 255
indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.24 |
vProfNullPassWhen enabled, null characters received by Telnet
immediately following carriage return characters are
passed through the data stream untouched. When disabled,
these padding null characters are removed from the
received data stream. This applies to sessions initiated
with this profile.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.25 |
vProfLocalEchoDetermines how the local Telnet entity negotiates the
local echo option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.26 |
vProfRemoteEchoDetermines how the local Telnet entity negotiates the
remote echo option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.27 |
vProfLocalBinaryDetermines how the local Telnet entity negotiates the
local binary option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.28 |
vProfRemoteBinaryDetermines how the local Telnet entity negotiates the
remote binary option with the remote Telnet entity for
sessions initiated with this profile. 'attempt(1)'
indicates the the local Telnet entity actively attempts
to enable the option. 'refuse(2)' indicates that the
local Telnet entity will refuse to enable the option
even when requested by the remote entity. 'allow(3)
indicates that the local Telnet entity will not actively
attempt to enable the option, but will enable the option
when requested by the remote entity.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.29 |
vProfStatusThe current status of this profile entry. Setting this
object to the value invalid(2) has the effect of deleting
the entry from the profile table.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.30 |
vcpIpSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.5 |
vSecEnableDetermines whether or not the server's IP security
feature is enabled.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.5.1 |
vSecCurrNumberAn integer indicating the current number of entries in
vSecTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.5.2 |
vSecTableA list of security entries. The number of entries is
given by the value of vSecCurrNumber. SEQUENCE OF VSecEntry .1.3.6.1.4.1.170.1.1.2.6.1.5.3 |
vSecEntryParameter values for a security entry. VSecEntry .1.3.6.1.4.1.170.1.1.2.6.1.5.3.1 |
vSecIndexA unique value for each security entry.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.1 |
vSecAddressThe target address of the IP security entry.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.2 |
vSecMaskA mask which is applied to vSecAddress to determine its
significant bits.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.3 |
vSecGroupsA set of group numbers which determines which security
entries are in use on which ports.rw LtGroupList .1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.4 |
vSecStatusThe current status of this security entry. Setting this
object to the value invalid(2) has the effect of deleting
the entry from the security table.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.5 |
vcpHostname OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.6 |
vHostCurrNumberAn integer indicating the current number of entries in
vHostTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.6.1 |
vHostTableA list of hostname entries. The number of entries is
given by the value of vHostCurrNumber. SEQUENCE OF VHostEntry .1.3.6.1.4.1.170.1.1.2.6.1.6.2 |
vHostEntryParameter and status values for a hostname entry. VHostEntry .1.3.6.1.4.1.170.1.1.2.6.1.6.2.1 |
vHostHostnameThe hostname of the host. Note that if the value of
vNsAllowLowerCase is 'disabled(2)', then on a set-request
the specified hostname is automatically converted to
upper case.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.1 |
vHostAddressThe IP address of the host.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.2 |
vHostTTLThe time to live (in seconds) of this entry in the host
table. If the entry has been dynamically created by the
nameserver protocol, the TTL will be a non-zero value
indicating its remaining lifetime. Upon expiration of
the TTL the entry is automatically deleted from the
table. If the entry was created by a network
administrator, the entry is considered 'permanent' and
the value of its vHostTTL will be 0.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.3 |
vHostStatusThe desired status of this host entry. Setting this
object to the value 'invalid(2)' indicates that the
entry is desired to be deleted from the host table. Only
permanent entries will be deleted (entries for which the
value of vHostTTL is 0). Dynamic entries are only
deleted upon expiration of their vHostTTL or upon system
re-initialization.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.4 |
vcpNameserver OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.7 |
vNsRequestModeThe current mode of network hostname resolution.
'recursive(1)' indicates that the server sends
recursive-type requests to network nameservers.
'nonRecursive(2)' indicates that the server does not
send recursive-type nameserver requests.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.7.1 |
vNsAllowLowerCaseDetermines whether the nameserver resolver will
automatically convert user-specified hostnames to upper
case before attempting to resolve them. 'disabled(2)'
indicates that automatic conversion to upper case will
take place.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.7.2 |
vNsCurrNumberAn integer indicating the current number of entries in
vNsTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.7.3 |
vNsTableA list of nameserver entries. The number of entries is
given by the value of vNsCurrNumber. SEQUENCE OF VNsEntry .1.3.6.1.4.1.170.1.1.2.6.1.7.4 |
vNsEntryParameter values for a nameserver entry. VNsEntry .1.3.6.1.4.1.170.1.1.2.6.1.7.4.1 |
vNsAddressThe IP address of the nameserver host.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.1 |
vNsHostnameThe resolved hostname of the nameserver host A zero-
length value indicates that the hostname is unknown
at the present time.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.2 |
vNsTTLThe time to live (in seconds) of this entry in the
nameserver table. If the entry has been dynamically
created by the nameserver protocol, the TTL will be a
non-zero value indicating its remaining lifetime. Upon
expiration of the TTL the entry is automatically deleted
from the table. If the entry was created by a network
administrator, the entry is considered 'permanent' and
the value of its vNsTTL will be 0.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.3 |
vNsStatusThe status of this nameserver entry. Setting this
object to the value 'invalid(2)' has the effect of
deleting the entry from the nameserver table. Dynamic
entries are also automatically deleted upon expiration of
their vNsTTL or upon system re-initialization.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.4 |
vcpTacacs OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.8 |
vTacServerCurrNumberAn integer indicating the current number of entries in
vTacTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.8.1 |
vTacTableA list of Tacacs server entries. The number of entries
is given by the value of vTacServerCurrNumber. SEQUENCE OF VTacEntry .1.3.6.1.4.1.170.1.1.2.6.1.8.2 |
vTacEntryParameter values for a Tacacs server entry. VTacEntry .1.3.6.1.4.1.170.1.1.2.6.1.8.2.1 |
vTacAddressThe IP address of the Tacacs server host.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.8.2.1.1 |
vTacHostnameThe resolved hostname of the Tacacs server host. If the
hostname is currently unknown, a zero-length value is
returned.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.8.2.1.2 |
vTacStatusThe current status of this Tacacs server entry. Setting
this object to the value invalid(2) has the effect of
deleting the entry from the Tacacs server table.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.8.2.1.3 |
vcpIp OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.9 |
vIpBcastAddrThe IP address to be used for IP limited broadcasts
originating from this unit.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.9.1 |
vIpMaxAddrAn integer indicating the maximum number of IP addresses
that can be simultaneously assigned to this unit,
totaling over all interfaces. Note that the server must
be rebooted before a change in the value of this variable
actually takes effect.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.9.2 |
vIpMaxHostHashEntriesAn integer indicating the number of buckets in the host
route hash table. Note that the server must be rebooted
before a change in the value of this variable actually
takes effect.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.9.3 |
vIpMaxNetHashEntriesAn integer indicating the number of buckets in the
network route hash table. Note that the server must be
rebooted before a change in the value of this variable
actually takes effect.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.9.4 |
vIpMaxInterfacesAn integer indicating the maximum number of IP
interfaces of all types that can be configured on the
unit. Note that the server must be rebooted before a
change in the value of this variable actually takes
effect.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.9.5 |
vIpMaxRoutesAn integer indicating the maximum number of entries in
the unit's route table. Note that the server must be
rebooted before a change in the value of this variable
actually takes effect.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.9.6 |
vcpArp OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.10 |
vArpMaxEntriesAn integer indicating the maximum number of entries in
the unit's ARP table. Note that the server must be
rebooted before a change in the value of this variable
actually takes effect.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.10.1 |
vArpRetryTimeoutAn integer indicating the number of seconds between
ARP retransmit attempts.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.10.2 |
vArpRetryMaxAn integer indicating the maximum number of ARP
retransmit attempts.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.10.3 |
vArpConfirmTimerAn integer indicating the number of seconds between
confirmations of an ARP entry.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.10.4 |
vArpIdleTimeoutAn integer indicating the number of seconds that a
non-permanent ARP entry can go unused before it is
deleted from the table. A non-permanent entry is one
which was entered into the table by the ARP protocol
rather than manually entered by a network administrator.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.10.5 |
vcpTcp OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.11 |
vTcpIpPrecedenceAn integer indicating the value of the IP precedence
that the TCP layer will request.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.11.1 |
vTcpSendQSizeAn integer indicating the maximum number of data bytes
that will be queued for transmission by the TCP protocol
layer.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.11.2 |
vTcpRcvWinSizeAn integer indicating the TCP receive window size in
bytes.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.11.3 |
vTcpSegSizeAn integer indicating the TCP segment size in bytes.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.11.4 |
vTcpTimerIntervalAn integer indicating the resolution (in 1/100 s) of all
timer values used by TCP.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.11.5 |
vTcpChecksumEnableAn integer indicating whether TCP checksums are enabled
for all TCP connections.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.11.6 |
vcpTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.12 |
vTelCourierEnableDetermines whether or not the Telnet courier feature is
enabled.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.1 |
vTelCourierTextDefines the text which is tranmsitted for the Telnet
courier feature.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.12.2 |
vTelSessCurrNumberAn integer indicating the current number of entries in
vTelSessTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.3 |
vTelSessTableA list of Telnet session entries. The number of entries
is given by the value of vTelSessCurrNumber. SEQUENCE OF VTelSessEntry .1.3.6.1.4.1.170.1.1.2.6.1.12.4 |
vTelSessEntryParameter and status values for a Telnet session entry. VTelSessEntry .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1 |
vTelSessPortIndexThe value of vPortIndex for the port to which this
session belongs.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.1 |
vTelSessIndexThe session index in the context of the port, a
non-zero positive integer. Session indexes within a
port need not be sequential. Session indexes may be
reused for different ports. For example, port 1 and
port 3 may both have a session 2 at the same time.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.2 |
vTelSessOriginThe session's source of establishment.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.3 |
vTelSessStateThe current state of the session.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.4 |
vTelSessDisconnectA control to terminate the session. In response to
a get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes termination.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.5 |
vTelSessLocalAddrThe local IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable.ro IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.6 |
vTelSessLocalTcpPortThe local TCP port number for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.7 |
vTelSessRemAddrThe remote IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable.ro IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.8 |
vTelSessRemTcpPortThe remote TCP port number for this session. This
object supplies part of the necessary index information
to locate the corresponding session in the MIB II
TcpConnTable.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.9 |
vTelSessCrToNetThe character sequence which is sent to the remote node
of the session to indicate a carriage return in the data
stream.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.10 |
vTelSessCrFromTermThe local character sequence which, when delivered to
Telnet for transmission, is interpreted as a carriage
return and translated to the sequence indicated by
vTelSessCrToNet.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.11 |
vTelSessPadCharThe character used by the local Telnet implementation
to pad transmitted data immediately following a carriage
return. A value of 0 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.12 |
vTelSessPadLengthThe number of pad characters inserted into the data
stream by the local Telnet implementation immediately
following a carriage return.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.13 |
vTelSessUserTimeoutThe maximum number of seconds Telnet instructs TCP to
wait for an acknowledgement before terminating the
session.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.14 |
vTelSessKeepaliveThe number of seconds that the session may remain idle
(no characters transmitted or recieved) before a TCP
keepalive message is generated. A value of 0 indicates
that keepalive messages are never generated.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.15 |
vTelSessIpTTLThe value of the IP time to live on packets transmitted
for this session.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.16 |
vTelSessIpPrecedenceThe value of the IP precedence on packets transmitted
for this session.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.17 |
vTelSessEndRecordThe local character which, when delivered to Telnet for
transmission, is interpreted as an end-of-record
character and translated to the appropriate Telnet
control function. A value of 255 indicates that the
character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.18 |
vTelSessNopThe local character which, when delivered to Telnet for
transmission, is interpreted as a no-op character and
translated to the appropriate Telnet control function. A
value of 255 indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.19 |
vTelSessDataMarkThe local character which, when delivered to Telnet for
transmission, is interpreted as a data mark character and
translated to the appropriate Telnet control function. A
value of 255 indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.20 |
vTelSessBreakThe local character which, when delivered to Telnet for
transmission, is interpreted as a break character and
translated to the appropriate Telnet control function. A
value of 255 indicates that the character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.21 |
vTelSessIntProcessThe local character which, when delivered to Telnet for
transmission, is interpreted as the interrupt process
character and translated to the appropriate Telnet
control function. A value of 255 indicates that the
character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.22 |
vTelSessAbortOutputThe local character which, when delivered to Telnet for
transmission, is interpreted as the abort output
character and translated to the appropriate Telnet
control function. A value of 255 indicates that the
character is disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.23 |
vTelSessAttentionThe local character which, when delivered to Telnet for
transmission, is interpreted as the attention character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.24 |
vTelSessEraseCharThe local character which, when delivered to Telnet for
transmission, is interpreted as the backspace character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.25 |
vTelSessEraseLineThe local character which, when delivered to Telnet for
transmission, is interpreted as the erase line character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.26 |
vTelSessGoAheadThe local character which, when delivered to Telnet for
transmission, is interpreted as the go ahead character
and translated to the appropriate Telnet control
function. A value of 255 indicates that the character is
disabled.rw Character .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.27 |
vTelSessNullPassWhen enabled, null characters received by Telnet
immediately following carriage return characters are
passed through the data stream untouched. When disabled,
these padding null characters are removed from the
received data stream.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.28 |
vTelSessTermTypeA text string indicating the currently negotiated
terminal type for the session. A zero-length value
indicates no terminal type has been negotiated.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.29 |
vTelSessLocalEchoWhen enabled, the local Telnet will perform local
echoing of all data delivered to it for transmission.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.30 |
vTelSessRemoteEchoWhen enabled, the remote Telnet will perform echoing of
all received network data.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.31 |
vTelSessLocalBinaryWhen enabled, the local Telnet will transmit data in
binary mode.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.32 |
vTelSessRemoteBinaryWhen enabled, the remote Telnet will transmit data in
binary mode.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.33 |
vcpRlogin OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.13 |
vRlogSessCurrNumberAn integer indicating the current number of entries in
vRlogSessTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.13.1 |
vRlogSessTableA list of Rlogin session entries. The number of entries
is given by the value of vRlogSessCurrNumber. SEQUENCE OF VRlogSessEntry .1.3.6.1.4.1.170.1.1.2.6.1.13.2 |
vRlogSessEntryParameter and status values for a Rlogin session entry. VRlogSessEntry .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1 |
vRlogSessPortIndexThe value of vPortIndex for the port to which this
session belongs.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.1 |
vRlogSessIndexThe session index in the context of the port, a
non-zero positive integer. Session indexes within a
port need not be sequential. Session indexes may be
reused for different ports. For example, port 1 and
port 3 may both have a session 2 at the same time.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.2 |
vRlogSessOriginThe session's source of establishment.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.3 |
vRlogSessStateThe current state of the session.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.4 |
vRlogSessDisconnectA control to terminate the session. In response to
a get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes termination.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.5 |
vRlogSessLocalAddrThe local IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable.ro IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.6 |
vRlogSessLocalTcpPortThe local TCP port number for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.7 |
vRlogSessRemAddrThe remote IP address for this session. This object
supplies part of the necessary index information to
locate the corresponding session in the MIB II
TcpConnTable.ro IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.8 |
vRlogSessRemTcpPortThe remote TCP port number for this session. This
object supplies part of the necessary index information
to locate the corresponding session in the MIB II
TcpConnTable.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.9 |
vRlogSessTermTypeA text string indicating the currently negotiated
terminal type for the session. A zero-length value
indicates no terminal type has been negotiated.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.10 |
vcpLt OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.14 |
vLtNodeNameThe LAT-compatible node name for this unit. This name
is transmitted as part of the node's LAT-compatible
multicast messages.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.14.1 |
vLtNodeIDThe LAT-compatible identification string for this
server. This string is transmitted as part of the
agent's LAT-compatible multicast messages.rw DisplayString .1.3.6.1.4.1.170.1.1.2.6.1.14.2 |
vLtNodeGroupsA bit string indicating the LAT-compatible groups which
are transmitted as part of the node's LAT-compatible
multicast messages.rw LtGroupList .1.3.6.1.4.1.170.1.1.2.6.1.14.3 |
vLtNumberAn integer indicating the LAT-compatible number that is
tranmsitted as part of the node's LAT-compatible
multicast messages.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.4 |
vLtMcastEnableAn integer indicating whether the unit's LAT-compatible
periodic multicast is enabled or not. If enabled, the
unit will transmit one LAT-compatible multicast message
every vLtMcastTimer seconds if it has any local services
to announce.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.14.5 |
vLtMcastTimerAn integer indicating the unit's multicast timer value
in seconds. If multicasts are enabled, the unit will
transmit one LAT-compatible multicast message every
vLtMcastTimer seconds if it has any local services to
announce.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.6 |
vLtCktTimerAn integer indicating the unit's circuit timer value in
milliseconds. For circuits on which the unit is the
master, circuit data is collected for transmission once
every circuit timer interval.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.7 |
vLtKeepaliveTimerAn integer indicating the unit's keepalive timer value
in seconds. For circuits on which the unit is the
master, a keepalive message is transmitted once every
keepalive timer interval if the circuit is otherwise
idle.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.8 |
vLtMaxRetranAn integer indicating the maximum number of times the
unit will attempt to retransmit LAT-compatible messages.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.9 |
vLtSlotPerCktAn integer indicating the maximum number of slots per
circuit that the unit can support. This effectively
limits the number of sessions the unit can maintain with
any other node on a single circuit.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.10 |
vLtMaxNodesAn integer indicating the maximum number of
LAT-compatible nodes about which the unit will maintain
information necessary for session establishment. When
the unit receives LAT-compatible multicasts, it enters
the pertinent information into its internal node table.
This object indicates the maximum number of entries in
the node table.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.11 |
vLtMaxSvcsAn integer indicating the maximum number of
LAT-compatible services about which the unit will
maintain information necessary for session establishment.
When the unit receives LAT-compatible multicasts, it
enters the pertinent information into its internal
service table. This object indicates the size of the
service table.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.12 |
vLtMaxCktsAn integer indicating the maximum number of simultaneous
active LAT-compatible circuits. In effect this object
governs the maximum number of LAT-compatible nodes with
which the unit can maintain simultaneous connections.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.13 |
vLtSessCurrNumberAn integer indicating the current number of entries in
vLtSessTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.14 |
vLtSessTableA list of LAT-compatible session entries. The number of
entries is given by the value of vLtSessCurrNumber. SEQUENCE OF VLtSessEntry .1.3.6.1.4.1.170.1.1.2.6.1.14.15 |
vLtSessEntryParameter and status values for a LAT-compatible session
entry. VLtSessEntry .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1 |
vLtSessPortIndexThe value of vPortIndex for the port to which this
session belongs.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.1 |
vLtSessIndexThe session index in the context of the port, a
non-zero positive integer. Session indexes within a
port need not be sequential. Session indexes may be
reused for different ports. For example, port 1 and
port 3 may both have a session 2 at the same time.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.2 |
vLtSessOriginThe session's source of establishment. 'network(2)'
indicates that a remote node has started this session.
'local(3)' indicates that the session was started by the
agent port given by vLtSessPortIndex. 'remote-port(4)'
indicates that the session is local between two server
ports, and the port given by vLtSessPortIndex was not
the initiator of the session.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.3 |
vLtSessStateThe current state of the session.ro Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.4 |
vLtSessDisconnectA control to terminate the session. In response to
a get-request or get-next-request, the agent always
returns 'ready(1)' as the value. Setting the value to
'execute(2)' causes termination.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.5 |
vLtSessSvcNameA (readable) text string indicating the name of the
LAT-compatible remote service. A zero-length value
indicates that the remote service for this session is
unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.6 |
vLtSessNodeNameA (readable) text string indicating the name of the
LAT-compatible remote node. A zero-length value
indicates that the remote node for this session is
unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.7 |
vLtSessDestNameA (readable) text string indicating the name of the
LAT-compatible remote destination port. A zero-length
value indicates that the remote port name for this
session is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.8 |
vLtTotalRcvPktsA count of the total number of LAT-compatible messages
received and processed by the unit.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.16 |
vLtTotalTrnPktsA count of the total number of LAT-compatible messages
transmitted by the unit.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.17 |
vLtTotalRetranPktsA count of the total number of LAT-compatible messages
retransmited.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.18 |
vLtRcvCorruptPktsA count of the total number of LAT-compatible station
packets recieved which were found to be invalid or
corrupted.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.19 |
vLtRcvCorruptMcastsA count of the total number of LAT-compatible multicast
packets recieved which were found to be invalid or
corrupted.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.20 |
vLtRcvDuplicatePktsA count of the total number of LAT-compatible messages
received which had already been acknowledged by the
unit.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.21 |
vLtReqAcceptedA count of the total number of remote connection
requests which were received and accepted by the unit.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.22 |
vLtReqRejectedA count of the total number of remote connection
requests which were received and rejected by the unit.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.23 |
vLtTotalNodeDiscardsA count of the total number of LAT-compatible nodes that
the unit has not been able to insert into its internal
node table, due to resource failures.ro Counter .1.3.6.1.4.1.170.1.1.2.6.1.14.24 |
vcpQueue OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.15 |
vQueMaxEntriesAn integer indicating the maximum number of queued
connection requests. This governs the maximum value that
vQueCurrNumber can take.rw INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.15.1 |
vQueCurrNumberAn integer indicating the current number of entries in
vQueTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.15.2 |
vQueTableA list of queue entries. The number of entries is given
by the value of vQueCurrNumber. SEQUENCE OF VQueEntry .1.3.6.1.4.1.170.1.1.2.6.1.15.3 |
vQueEntryParameter and status values for a queue entry. VQueEntry .1.3.6.1.4.1.170.1.1.2.6.1.15.3.1 |
vQueEntryNumberA unique identifier for the queue entry. Entry numbers
may be re-used, but there will never be two simultaneous
queue entries with the same value of vQueEntryNumber.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.1 |
vQueSvcNameThe name of the service for which this queue entry is
awating connection.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.2 |
vQueNodeNameThe name of the remote node with which the connection
will take place.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.3 |
vQuePortNameThe name of the port with which the connection will take
place.ro OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.4 |
vQueStatusThe current status of the queue entry. Setting the
value of this object to 'invalid(2)' has the effect of
deleting the queue entry.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.5 |
vcpSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.170.1.1.2.6.1.16 |
vSnmpReadCommunityA current community name in use by the agent for which
get-requests and getnext-requests are permitted.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.16.1 |
vSnmpWriteCommunityA current community name in use by the agent for which
the set-request is permitted.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.16.2 |
vSnmpReadWriteCommunityA current community name in use by the agent for which
set-requests, get-requests, and getnext-requests are
permitted.rw OCTET STRING .1.3.6.1.4.1.170.1.1.2.6.1.16.3 |
vSnmpWriteEnableAn integer which indicates whether SET requests are
permitted from any management station. This flag
overrides use of the WRITE or READWRITE community names.
Thus, if this object has the value disabled(2), no SET
requests are permitted regardless of community name.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.16.4 |
vSnmpTrapDestCurrNumberAn integer indicating the current number of entries in
vSnmpTrapDestTable. This object is not constant.ro INTEGER .1.3.6.1.4.1.170.1.1.2.6.1.16.5 |
vSnmpTrapDestTableA list of destination management stations to which this
agent will address certain generated trap messages. The
number of entries is given by the value of
vSnmpTrapDestCurrNumber. SEQUENCE OF VSnmpTrapDestEntry .1.3.6.1.4.1.170.1.1.2.6.1.16.6 |
vSnmpTrapDestEntryParameter and status values for a SNMP trap destination
entry. VSnmpTrapDestEntry .1.3.6.1.4.1.170.1.1.2.6.1.16.6.1 |
vSnmpTrapDestAddrThe IP address of this trap destination node.rw IpAddress .1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.1 |
vSnmpTrapDestCommunityIndication of which of the three locally maintained
community names will be used in trap messages addressed
to this trap destination.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.2 |
vSnmpTrapDestColdEnableAn indication of whether trap messages of the
'cold-start' type will be sent to this trap destination.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.3 |
vSnmpTrapDestAuthEnableAn indication of whether trap messages of the
'authentication-failure' type will be sent to this trap
destination.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.4 |
vSnmpTrapDestStatusThe current status of the trap destination entry.
Setting this object to the value 'invalid(2)' has the
effect of deleting the entry.rw Enumeration .1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.5 |