BEGEMOT-NTP-MIB
Imported Objects
Objects
11 total| Object Name |
|---|
begemotNtpThe MIB for the NTP control module for SNMP. MODULE-IDENTITY .1.3.6.1.4.1.12325.1.201 |
begemotNtpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.12325.1.201.1 |
begemotNtpHostThe name of the host where the NTP daemon is running that is to be connected.ro OCTET STRING .1.3.6.1.4.1.12325.1.201.1.1 |
begemotNtpPortThe port of the host where the NTP daemon is running that is to be connected.ro OCTET STRING .1.3.6.1.4.1.12325.1.201.1.2 |
begemotNtpTimeoutThe number of ticks to wait for the response from the NTP daemon to complete.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.12325.1.201.1.3 |
begemotNtpDebugDebug flags. The following flags are currently used: 0x01 - produce a dump of all received/sent NTP packets. 0x02 - print the variable names and values return by the daemon Other bits are ignored.rw Unsigned32 .1.3.6.1.4.1.12325.1.201.1.4 |
begemotNtpJitterCurrent jitter in seconds multiplied by 2^32.ro Counter64 .1.3.6.1.4.1.12325.1.201.1.5 |
begemotNtpStabilityCurrent stability in ppm multiplied by 2^32.ro Counter64 .1.3.6.1.4.1.12325.1.201.1.6 |
begemotNtpJitterThreshJitter trap threshold in seconds multiplied by 2^32.ro Counter64 .1.3.6.1.4.1.12325.1.201.1.7 |
begemotNtpStabilityThreshStability trap threshold in ppm multiplied by 2^32.ro Counter64 .1.3.6.1.4.1.12325.1.201.1.8 |
begemotNtpTrapEnableEnables the sending of traps when either the peer is lost/ found or one of the above thresholds is crossed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.12325.1.201.1.9 |
More MIBs from Fraunhofer FOKUS, CATS
Browse all Fraunhofer FOKUS, CATSMIBs →SNMP MIB module
The BEGEMOT-PF-MIB module provides SNMP access to monitor and manage packet filter (pf) firewall statistics and state data within the Begemot monitoring framework. It exposes critical metrics including packet and byte counters, rule match rates, session table utilization, and interface traffic flows for real-time network security analysis.
SNMP MIB module
The BEGEMOT-SNMPD-MIB provides the management interface for the Begemot SNMP daemon, exposing operational metrics such as active session counts, request processing statistics, and internal daemon state variables for performance monitoring and troubleshooting.
The BEGEMOT-NETGRAPH-MIB provides SNMP access to monitor and manage NetGraph node states, link statistics, and protocol-specific traffic counters within FreeBSD-based networking environments. It enables the retrieval of operational metrics for dynamic graph-based packet processing nodes, including interface throughput, error rates, and active session counts.
The BEGEMOT-HAST-MIB module facilitates the monitoring and management of High Availability Storage (HAST) clusters within the Begemot operating system environment, exposing critical state metrics such as synchronization status, node roles, and replication health to enable automated failover detection and cluster integrity verification.