BEGEMOT-MIB2-MIB
The BEGEMOT-MIB2-MIB module extends standard SNMP MIB-2 functionality to monitor proprietary metrics on Begemot Network Systems devices, specifically tracking interface statistics, system resources, and protocol states for network performance analysis.
Imported Objects
Objects
4 total| Object Name |
|---|
begemotMib2The MIB for private mib2 stuff. MODULE-IDENTITY .1.3.6.1.4.1.12325.1.3.1 |
begemotIfMaxspeedThe speed of the fastest interface in ifTable in bps.ro Counter64 UNITS "bps" .1.3.6.1.4.1.12325.1.3.1.1 |
begemotIfPollThe current polling rate for the HC 64-bit counters.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.12325.1.3.1.2 |
begemotIfForcePollThe polling rate to be enforced for the HC 64-bit counters. If this value is 0 the mib2 module computes a polling rate depending on the value of begemotIfMaxspeed. If this value turns out to be wrong, the polling rate can be force to an arbitrary value by setting begemotIfForcePoll to a non-0 value. This may be necessary if an interface announces a wrong bit rate in its MIB.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.12325.1.3.1.3 |
More MIBs from Fraunhofer FOKUS, CATS
Browse all Fraunhofer FOKUS, CATSMIBs →SNMP MIB module
The BEGEMOT-PF-MIB module provides SNMP access to monitor and manage packet filter (pf) firewall statistics and state data within the Begemot monitoring framework. It exposes critical metrics including packet and byte counters, rule match rates, session table utilization, and interface traffic flows for real-time network security analysis.
SNMP MIB module
The BEGEMOT-SNMPD-MIB provides the management interface for the Begemot SNMP daemon, exposing operational metrics such as active session counts, request processing statistics, and internal daemon state variables for performance monitoring and troubleshooting.
The BEGEMOT-NETGRAPH-MIB provides SNMP access to monitor and manage NetGraph node states, link statistics, and protocol-specific traffic counters within FreeBSD-based networking environments. It enables the retrieval of operational metrics for dynamic graph-based packet processing nodes, including interface throughput, error rates, and active session counts.
The BEGEMOT-HAST-MIB module facilitates the monitoring and management of High Availability Storage (HAST) clusters within the Begemot operating system environment, exposing critical state metrics such as synchronization status, node roles, and replication health to enable automated failover detection and cluster integrity verification.