BEGEMOT-ATM-MIB
The BEGEMOT-ATM-MIB module enables monitoring and management of Asynchronous Transfer Mode (ATM) interface statistics and performance counters within the Begemot network monitoring system. It provides access to standard ATM-specific metrics, including cell loss, utilization, and interface status, for troubleshooting and capacity planning on ATM-capable hardware.
Imported Objects
Objects
23 total| Object Name |
|---|
begemotAtmThe Begemot MIB for ATM interfaces. MODULE-IDENTITY .1.3.6.1.4.1.12325.1.101 |
begemotAtmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.12325.1.101.1 |
begemotAtmIfTableThis table contains an entry for each hardware ATM interface. The table is indexed by the interface index. SEQUENCE OF BegemotAtmIfEntry .1.3.6.1.4.1.12325.1.101.1.1 |
begemotAtmIfEntryThis is a table entry describing one ATM hardware interface. BegemotAtmIfEntry .1.3.6.1.4.1.12325.1.101.1.1.1 |
begemotAtmIfNameName of the ATM interface.ro DisplayString .1.3.6.1.4.1.12325.1.101.1.1.1.1 |
begemotAtmIfPcrThe line cell rate of the interface.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.1.1.2 |
begemotAtmIfMediaThe physical medium.ro Enumeration .1.3.6.1.4.1.12325.1.101.1.1.1.3 |
begemotAtmIfVpiBitsNumber of VPI bits that are used by the device.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.1.1.4 |
begemotAtmIfVciBitsNumber of VCI bits that are used by the device.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.1.1.5 |
begemotAtmIfMaxVpcsThe maximum number of VPC supported on this device. This may not be larger than 2^begemotAtmIfVpiBits.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.1.1.6 |
begemotAtmIfMaxVccsThe maximum number of VCC supported on this device. This may not be larger than 2^(begemotAtmIfVpiBits + begemotAtmVciBits).ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.1.1.7 |
begemotAtmIfEsiThe default End System Identifier as reported by the hardware. If the hardware has no ESI all six bytes are reported as 0.ro AtmESI .1.3.6.1.4.1.12325.1.101.1.1.1.8 |
begemotAtmIfCarrierStatusThe state of the carrier. For interfaces which don't have the notion of a carriere none is reported.ro Enumeration .1.3.6.1.4.1.12325.1.101.1.1.1.9 |
begemotAtmIfModeThe mode of the SUNI interface. For interfaces without SUNI unknown is reported in which case the variable is read-only. Some types of interfaces may not be able to change this value.rw Enumeration .1.3.6.1.4.1.12325.1.101.1.1.1.10 |
begemotAtmIfTableLastChangeThe value of sysUpTime the last time that an entry in begemotIfTable was created or destroyed. If the table is unchanged since the last coldStart this value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.12325.1.101.1.2 |
begemotAtmHWTableThis table augments the begemotAtmIfTable and contains an entry for each hardware ATM interface. The entries describe the ATM hardware interface. SEQUENCE OF BegemotAtmHWEntry .1.3.6.1.4.1.12325.1.101.1.3 |
begemotAtmHWEntryThis is a table entry describing one ATM hardware interface. BegemotAtmHWEntry .1.3.6.1.4.1.12325.1.101.1.3.1 |
begemotAtmHWVendorA short string naming the vendor of the interface card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12325.1.101.1.3.1.1 |
begemotAtmHWDeviceA short string naming the brand of the interface card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12325.1.101.1.3.1.2 |
begemotAtmHWSerialThe serial number of the interface card or 0 if it doesn't report a serial number.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.3.1.3 |
begemotAtmHWVersionThe hardware version of the interface card or 0 if it doesn't report a hardware version number.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.3.1.4 |
begemotAtmHWSoftVersionThe firmware version of the interface card or 0 if it doesn't report a firmware version number.ro Unsigned32 .1.3.6.1.4.1.12325.1.101.1.3.1.5 |
begemotAtmSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.12325.1.101.1.4 |
More MIBs from Fraunhofer FOKUS, CATS
Browse all Fraunhofer FOKUS, CATSMIBs →SNMP MIB module
The BEGEMOT-PF-MIB module provides SNMP access to monitor and manage packet filter (pf) firewall statistics and state data within the Begemot monitoring framework. It exposes critical metrics including packet and byte counters, rule match rates, session table utilization, and interface traffic flows for real-time network security analysis.
SNMP MIB module
The BEGEMOT-SNMPD-MIB provides the management interface for the Begemot SNMP daemon, exposing operational metrics such as active session counts, request processing statistics, and internal daemon state variables for performance monitoring and troubleshooting.
The BEGEMOT-NETGRAPH-MIB provides SNMP access to monitor and manage NetGraph node states, link statistics, and protocol-specific traffic counters within FreeBSD-based networking environments. It enables the retrieval of operational metrics for dynamic graph-based packet processing nodes, including interface throughput, error rates, and active session counts.
The BEGEMOT-HAST-MIB module facilitates the monitoring and management of High Availability Storage (HAST) clusters within the Begemot operating system environment, exposing critical state metrics such as synchronization status, node roles, and replication health to enable automated failover detection and cluster integrity verification.