BCN-NTP-MIB
AI MIB Summary
The BCN-NTP-MIB module enables monitoring of Network Time Protocol (NTP) service status and statistical performance metrics on BCN hardware or software platforms. It exposes specific counters and gauges derived from RFC-1305 and RFC-5905 standards to track synchronization states, stratum levels, and packet processing statistics.
This module provides status as well as statistical information about the NTP service. Most of the OIDs defined on this MIB are based on the work done by A.S. Sethi and Dave Mills in the University of Delaware and published as: Management of the Network Time Protocol (NTP) with SNMP Technical Report No. 98-09 Other references used in the creation of this MIB are RFC-1305 and RFC-5905
Main OID:
bcnNtpMIB.1.3.6.1.4.1.13315.3.1.4.1
64
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
64 total| Object Name |
|---|
bcnNtp OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4 |
bcnNtpMIBThis module provides status as well as statistical information about the NTP service. Most of the OIDs defined on this MIB are based on the work done by A.S. Sethi and Dave Mills in the University of Delaware and published as: Management of the Network Time Protocol (NTP) with SNMP Technical Report No. 98-09 Other references used in the creation of this MIB are RFC-1305 and RFC-5905 MODULE-IDENTITY .1.3.6.1.4.1.13315.3.1.4.1 |
bcnNtpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.2 |
bcnNtpServiceStatusGeneral state of the NTP Service. OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.2.1 |
bcnNtpSerOperStateOperational state of the Service. The possible states are: running(1) The service is running normally. notRunning(2) The service is stopped either intentionally (i.e.: the service is not supposed to run on this node) or unintentionally (a problem has occurred). starting(3) The service is in the process of starting, either for the first time of after an event occurred. stopping(4) The service is in the process of stopping. Stopping a service might be necessary after a configuration change. fault(5) An error has been detected and the state is undefined.ro Enumeration .1.3.6.1.4.1.13315.3.1.4.2.1.1 |
bcnNtpSystemGeneral NTP system information. OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.2.2 |
bcnNtpSysLeapTwo-bit code warning of an impending leap second to be inserted in the NTP timescale.ro NTPLeapIndicator .1.3.6.1.4.1.13315.3.1.4.2.2.1 |
bcnNtpSysStratumIndicating the stratum of the local clock. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP)ro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.2.2 |
bcnNtpSysPrecisionSigned integer indicating the precision of the various clocks, in seconds to the nearest power of two.ro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.2.3 |
bcnNtpSysRootDelayThe total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds. This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.2.4 |
bcnNtpSysRootDispersionThe maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive values greater than zero are possible. This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.2.5 |
bcnNtpSysRefIdThe particular reference clock.ro NTPRefId .1.3.6.1.4.1.13315.3.1.4.2.2.6 |
bcnNtpSysRefTimeThe local time when the local clock was last updated. If the local clock has never been synchronized, the value is zero.ro NTPTimeStamp .1.3.6.1.4.1.13315.3.1.4.2.2.7 |
bcnNtpSysPollThe minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum interval of 64 seconds.ro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.2.8 |
bcnNtpSysPeerThe current synchronization source. This is the association ID of the system peer. The special value NULL indicates there is no currently valid synchronization source.ro Unsigned32 .1.3.6.1.4.1.13315.3.1.4.2.2.9 |
bcnNtpSysFreqThe clock frequency offset (PPM) This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.2.10 |
bcnNtpSysClockThe current local time. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used.ro NTPTimeStamp .1.3.6.1.4.1.13315.3.1.4.2.2.11 |
bcnNtpSysSystemThe type of the local Operating Systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.2.12 |
bcnNtpSysProcessorThe type of the local Processorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.2.13 |
bcnNtpSysJitterIndicates how much the individual pulses vary from second to second (as measured by the operating system's clock). This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.2.14 |
bcnNtpPeersNTP peers information. OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.2.3 |
bcnNtpPeersVarTableA table listing the peers known to the server as well as summary information of their state. SEQUENCE OF BcnNtpPeersVarEntry .1.3.6.1.4.1.13315.3.1.4.2.3.1 |
bcnNtpPeersVarEntryA logical row in the bcnNtpPeersVarTable. BcnNtpPeersVarEntry .1.3.6.1.4.1.13315.3.1.4.2.3.1.1 |
bcnNtpPeersAssocIdAssociation ID of the peer. Unsigned32 .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.1 |
bcnNtpPeersConfiguredThis is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.2 |
bcnNtpPeersPeerAddressTypeThe Internet address type of the peer.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.3 |
bcnNtpPeersPeerAddressThe Internet address of the peer.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.4 |
bcnNtpPeersPeerPort16-bit port number of the peer.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.5 |
bcnNtpPeersHostAddressTypeThe Internet address type of the host.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.6 |
bcnNtpPeersHostAddressThe Internet address of the host.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.7 |
bcnNtpPeersHostPort16-bit port number of the host.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.8 |
bcnNtpPeersLeapTwo-bit code warning of an impending leap second to be inserted in the NTP timescale.ro NTPLeapIndicator .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.9 |
bcnNtpPeersModeThe association mode,with values coded as follows: 0, unspecified 1, symmetric active 2, symmetric passive 3, client 4, server 5, broadcast 6, reserved for NTP control messages 7, reserved for private usero Enumeration .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.10 |
bcnNtpPeersStratumIndicates the stratum of the peer clock. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP)ro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.11 |
bcnNtpPeersPeerPollPoll interval of the peerro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.12 |
bcnNtpPeersHostPollPoll interval of the hostro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.13 |
bcnNtpPeersPrecisionThe same as the systemPrecision except this is for the peer.ro Integer32 .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.14 |
bcnNtpPeersRootDelayThe same as the systemRootDealy except this is for the peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.15 |
bcnNtpPeersRootDispersionThe same as the systemDispersion except this is for the peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.16 |
bcnNtpPeersRefIdThe same as the systemRefid except this is for the peer.ro NTPRefId .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.17 |
bcnNtpPeersRefTimeThe same as the systemRefTime except this is for the peer.ro NTPTimeStamp .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.18 |
bcnNtpPeersOrgTimeThe local time at the peer when its latest NTP message was sent. If the peer becomes unreachable the value is set to zero.ro NTPTimeStamp .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.19 |
bcnNtpPeersReceiveTimeThe local time when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero.ro NTPTimeStamp .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.20 |
bcnNtpPeersTransmitTimeThe local time at which the NTP message departed the sender.ro NTPTimeStamp .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.21 |
bcnNtpPeersReachA shift register of NTP.WINDOW bits used to determine the reachability status of the peer, with bits entering from the least significant (rightmost) end. A peer is considered reachable if at least one bit in this register is set to one.ro Unsigned32 .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.22 |
bcnNtpPeersOffsetFilter offset. This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.23 |
bcnNtpPeersDelayFilter delay. This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.24 |
bcnNtpPeersDispersionFilter dispersion. This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.25 |
bcnNtpPeersJitterbcnNtpPeersJitter indicates how much the individual pulses vary from second to second (as measured by the operating system's clock). This is an ASCII string representing a floating point number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.2.3.1.1.26 |
bcnNtpNotification OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.3 |
bcnNtpNotificationEvents OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.3.0 |
bcnNtpAlarmNotifA bcnNtpAlarmNotif signifies that the NTP service has transitioned state or a particular event has been detected on the service. NOTIFICATION-TYPE .1.3.6.1.4.1.13315.3.1.4.3.0.1 |
bcnNtpNotificationData OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.3.1 |
bcnNtpAlarmSeveritySeverity classification for the alarm.ro BcnAlarmSeverity (BCN-TC-MIB) .1.3.6.1.4.1.13315.3.1.4.3.1.1 |
bcnNtpAlarmInfoDescriptive information about the alarm event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13315.3.1.4.3.1.2 |
bcnNtpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.4 |
bcnNtpServiceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.4.1 |
bcnNtpStatusComplianceBasic conformance Unknown .1.3.6.1.4.1.13315.3.1.4.4.1.1 |
bcnNtpServiceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.13315.3.1.4.4.2 |
bcnNtpServiceStatusGroupStatus conformance. Unknown .1.3.6.1.4.1.13315.3.1.4.4.2.1 |
bcnNtpSystemGroupSystem variables conformance. Unknown .1.3.6.1.4.1.13315.3.1.4.4.2.2 |
bcnNtpPeersGroupPeer variables conformance. Unknown .1.3.6.1.4.1.13315.3.1.4.4.2.3 |
bcnNtpNotificationEventGroupServer statistics conformance. Unknown .1.3.6.1.4.1.13315.3.1.4.4.2.4 |
bcnNtpNotificationDataGroupServer statistics conformance. Unknown .1.3.6.1.4.1.13315.3.1.4.4.2.5 |