ATTO6500N-MIB
AI MIB Summary
The ATTO6500N-MIB module provides vendor-specific SNMP extensions for monitoring the ATTO 6500N Fibre Channel host bus adapter, exposing critical performance counters, link status states, and hardware health metrics for storage area network (SAN) connectivity management.
ATTO 6500N Custom MIB
Main OID:
bridge.1.3.6.1.4.1.4547.2.3
124
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
124 total| Object Name |
|---|
attotech OBJECT IDENTIFIER .1.3.6.1.4.1.4547 |
attoProducts OBJECT IDENTIFIER .1.3.6.1.4.1.4547.1 |
attoMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2 |
bridgeATTO 6500N Custom MIB MODULE-IDENTITY .1.3.6.1.4.1.4547.2.3 |
bridgeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.0 |
bridgeTemperatureWarningSupports notification of over/under temperature warnings. The following information is returned: tempStatus - the current temperature status (normal, warning, critical) Where normal indicates the temperature is within the safe range. Warning indicates the warning threshold has been reached. Critical indicates that the temperature is outside the safe range. temperature - current temperature of the sensor Recommended severity level (for filtering): warning NOTIFICATION-TYPE .1.3.6.1.4.1.4547.2.3.0.1 |
fcPortTransitionSupports notification of fibre channel port connectivity changes. The following information is returned: fcPortPortNumber - the description of the port fcPortOperationalState - the current port state Recommended severity level (for filtering): informational NOTIFICATION-TYPE .1.3.6.1.4.1.4547.2.3.0.2 |
sasPortTransitionSupports notification of SAS port connectivity changes. The following information is returned: sasPortPortNumber - the description of the port sasPortOperationalState - the current port state Recommended severity level (for filtering): informational NOTIFICATION-TYPE .1.3.6.1.4.1.4547.2.3.0.3 |
bridgeThroughputWarningSupports notification of max-throughput warning indicating a potential data bottleneck. Data throughput is measured as aggregate completed I/O's per second on the Fibre Channel interfaces. The following information is returned: ChassisthroughputStatus - the current throughput status normal : no data bottleneck. warning: aggregate fibre channel throughput has exceeded 50,000 IOPS. Recommended severity level (for filtering): informational NOTIFICATION-TYPE .1.3.6.1.4.1.4547.2.3.0.4 |
bridgeIdentity OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.1 |
bridgeUniqueId8-octets uniquely identifying this HW element.ro DisplayWWN .1.3.6.1.4.1.4547.2.3.1.1 |
vendorIDVendor ID for this HW element.ro DisplayString .1.3.6.1.4.1.4547.2.3.1.2 |
modelNameProduct/Model name of this HW element.ro DisplayString .1.3.6.1.4.1.4547.2.3.1.3 |
primaryFirmwareRevisionBuild Number, Version Number and Base Version for the firmware on the primary partition (active firmware image).ro DisplayString .1.3.6.1.4.1.4547.2.3.1.4 |
primaryFirmwareBuildDateActive firmware image build date and time (no time zone offset).ro DateAndTime .1.3.6.1.4.1.4547.2.3.1.5 |
hardwareVersionCurrent version of 6500N hardware.ro Integer32 .1.3.6.1.4.1.4547.2.3.1.6 |
secondaryFirmwareRevisionVersion Number and Build Number for the firmware on the secondary partition (backup firmware image).ro DisplayString .1.3.6.1.4.1.4547.2.3.1.7 |
secondaryFirmwareBuildDateBackup Firmware image build date and time (no time zone offset).ro DateAndTime .1.3.6.1.4.1.4547.2.3.1.8 |
serialNumberSerial Number of this HW element.ro DisplayString .1.3.6.1.4.1.4547.2.3.1.9 |
bridgeNameUser defined symbolic name assigned to this HW element.ro DisplayString .1.3.6.1.4.1.4547.2.3.1.10 |
bridgeChassis OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.2 |
lastRebootDate and time of last reboot.ro DateAndTime .1.3.6.1.4.1.4547.2.3.2.1 |
uptimeTime since last reboot, in units of 0.01 secondsro TimeInterval -- Will roll over in 248 days .1.3.6.1.4.1.4547.2.3.2.2 |
lastRebootReasonPlain text reason for last reboot.ro DisplayString .1.3.6.1.4.1.4547.2.3.2.3 |
minimumOperatingTempMinimum Safe Operating Temperature, in degrees Cro Integer32 .1.3.6.1.4.1.4547.2.3.2.4 |
maximumOperatingTempMaximum Safe Operating Temperature, in degrees Cro Integer32 .1.3.6.1.4.1.4547.2.3.2.5 |
temperatureHighAlertSettingHigh temperature warning threshold, in degrees Cro Integer32 .1.3.6.1.4.1.4547.2.3.2.6 |
temperatureLowAlertSettingLow temperature warning threshold, in degrees Cro Integer32 .1.3.6.1.4.1.4547.2.3.2.7 |
chassisTemperatureCurrent Chassis Temperature, in degrees Cro Integer32 .1.3.6.1.4.1.4547.2.3.2.8 |
chassisTemperatureStatusThe current sensor status (normal, warning or critical). Normal indicates the temperature for this HW element is within the safe range. Warning indicates that the temperature for this HW element has passed the warning threshold but is still within the safe range. Critical indicates that the temperature for this HW element is not within the safe operating temperature range.ro Enumeration .1.3.6.1.4.1.4547.2.3.2.9 |
dramSingleBitErrorCountNumber of Single-bit ECC errors since last rebootro Integer32 .1.3.6.1.4.1.4547.2.3.2.10 |
chassisThroughputStatusOverall bridge throughput status (normal, warning). Normal indicates that there is no data bottleneck. Warning indicates that the aggregate fibre channel throughput has exceeded 50,000 IOPS.ro Enumeration .1.3.6.1.4.1.4547.2.3.2.11 |
fcSFPInfoTableStores configuration information relating to installed FibreChannel SFPs. SEQUENCE OF FCSFPInfoEntry .1.3.6.1.4.1.4547.2.3.2.12 |
fcSFPInfoEntryStores information about installed fibre channel SFPs. FCSFPInfoEntry .1.3.6.1.4.1.4547.2.3.2.12.1 |
fcSFPIndexUsed to index the SFP in the SFP Info table. Integer32 .1.3.6.1.4.1.4547.2.3.2.12.1.1 |
fcSFPVendorSFP vendor namero DisplayString .1.3.6.1.4.1.4547.2.3.2.12.1.2 |
fcSFPSerialNumSFP serial numberro DisplayString .1.3.6.1.4.1.4547.2.3.2.12.1.3 |
fcSFPPartNumSFP vendor-supplied part numberro DisplayString .1.3.6.1.4.1.4547.2.3.2.12.1.4 |
fcSFPDataRateCapabilityMaximum data rate capability of the fibre channel SFP.ro Enumeration .1.3.6.1.4.1.4547.2.3.2.12.1.5 |
sasQSFPInfoTableStores configuration information relating to installed SAS QSFPs. SEQUENCE OF SASQSFPInfoEntry .1.3.6.1.4.1.4547.2.3.2.13 |
sasQSFPInfoEntryStores information about installed SAS QSFPs. SASQSFPInfoEntry .1.3.6.1.4.1.4547.2.3.2.13.1 |
sasQSFPIndexUsed to index the QSFP in the QSFP Info table. Integer32 .1.3.6.1.4.1.4547.2.3.2.13.1.1 |
sasQSFPVendorQSFP vendor namero DisplayString .1.3.6.1.4.1.4547.2.3.2.13.1.2 |
sasQSFPSerialNumQSFP serial numberro DisplayString .1.3.6.1.4.1.4547.2.3.2.13.1.3 |
sasQSFPTypeQSFP typero QSFPTech .1.3.6.1.4.1.4547.2.3.2.13.1.4 |
sasQSFPPartNumQSFP vendor-supplied part numberro DisplayString .1.3.6.1.4.1.4547.2.3.2.13.1.5 |
bridgePorts OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.3 |
fcPortInfoTableStores fibre channel specific information for each fibre channel port. SEQUENCE OF FCPortInfoEntry .1.3.6.1.4.1.4547.2.3.3.1 |
fcPortInfoEntryStores state and capability information about the fibre channel ports. FCPortInfoEntry .1.3.6.1.4.1.4547.2.3.3.1.1 |
fcPortIndexUsed to index the fibre channel port in the FC Port Entry table. Integer32 .1.3.6.1.4.1.4547.2.3.3.1.1.1 |
fcPortPortNumberThe fibre channel port number.ro Integer32 .1.3.6.1.4.1.4547.2.3.3.1.1.2 |
fcPortOperationalStateOperational state of the fibre channel port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.3 |
fcPortAdminStateAdministrative state of the fibre channel port. Indicates whether the port is enabled or disabled.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.4 |
fcPortDataRateNegotiatedCurrent negotiated data rate of fibre channel port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.5 |
fcPortConnModeNegotiatedCurrent negotiated mode of the fibre channel port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.6 |
fcPortDataRateConfiguredConfigured data rate of fibre channel port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.7 |
fcPortConnModeConfiguredConfigured mode of the fibre channel port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.8 |
fcPortDataRateCapabilityMaximum data rate capability of the fibre channel port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.1.1.9 |
fcPortNodeNameFibre channel node name.ro DisplayWWN .1.3.6.1.4.1.4547.2.3.3.1.1.10 |
fcPortPortNameFibre channel port name.ro DisplayWWN .1.3.6.1.4.1.4547.2.3.3.1.1.11 |
fcPortPeerNameThe port name of the fabric-attached fibre channel peer. Only valid for a switched fabric. Direct-connected fibre channel ports will respond with all zeros.ro DisplayWWN .1.3.6.1.4.1.4547.2.3.3.1.1.12 |
fcPortStatisticsTableStores fibre channel specific I/O and error statistics for each fibre channel port. SEQUENCE OF FcPortStatisticsEntry .1.3.6.1.4.1.4547.2.3.3.2 |
fcPortStatisticsEntryStores statistics about fibre channel ports. FcPortStatisticsEntry .1.3.6.1.4.1.4547.2.3.3.2.1 |
fcStatsIndexUsed to index the fibre channel port in the Fibre Channel Port Statistics table. Integer32 .1.3.6.1.4.1.4547.2.3.3.2.1.1 |
fcStatsTxWordsNumber of words transmitted on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.2 |
fcStatsRxWordsNumber of words received on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.3 |
fcStatsTimeSinceResetAmount of time since the fibre channel port statistics were reset.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.4547.2.3.3.2.1.4 |
fcStatsErrLinkFailureNumber of link failure events on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.5 |
fcStatsErrLossOfSyncNumber of loss of sync events on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.6 |
fcStatsErrInvalidCRCNumber of frames with invalid CRCs on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.7 |
fcStatsErrInvalidTxWordsNumber of invalid TX word events on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.8 |
fcStatsErrLipCountNumber of LIP events on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.9 |
fcStatsErrNOSCountNumber of NOS events on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.10 |
fcStatsErrSignalLossNumber of loss of signal events on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.11 |
fcStatsErrPrimitiveNumber of primitive sequential protocol errors on this fibre channel port.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.2.1.12 |
sasPortInfoTableStores SAS specific information for each SAS port. SEQUENCE OF SASPortInfoEntry .1.3.6.1.4.1.4547.2.3.3.3 |
sasPortInfoEntryStores information about the SAS ports. SASPortInfoEntry .1.3.6.1.4.1.4547.2.3.3.3.1 |
sasPortIndexUsed to index the SAS port in the SAS Port Entry table. Integer32 .1.3.6.1.4.1.4547.2.3.3.3.1.1 |
sasPortPortNumberThe SAS port number.ro Integer32 .1.3.6.1.4.1.4547.2.3.3.3.1.2 |
sasPortOperationalStateOperational state of this entire SAS port. Degraded state is entered when fewer than all four PHYs are online. Offline state is entered when all four PHYs are offline.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.3.1.3 |
sasPortPhy1StateOperational state of SAS PHY 1 of this SAS port.ro PHYStatus .1.3.6.1.4.1.4547.2.3.3.3.1.4 |
sasPortPhy2StateOperational state of SAS PHY 2 of this SAS port.ro PHYStatus .1.3.6.1.4.1.4547.2.3.3.3.1.5 |
sasPortPhy3StateOperational state of SAS PHY 3 of this SAS port.ro PHYStatus .1.3.6.1.4.1.4547.2.3.3.3.1.6 |
sasPortPhy4StateOperational state of SAS PHY 4 of this SAS port.ro PHYStatus .1.3.6.1.4.1.4547.2.3.3.3.1.7 |
sasPortAdminStateAdministrative state of this SAS port. Indicates whether the port is enabled or disabled.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.3.1.8 |
sasPortDataRateCapabilityMaximum data rate capability of the SAS port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.3.1.9 |
sasPortDataRateNegotiatedCurrent negotiated data rate of this SAS port.ro Enumeration .1.3.6.1.4.1.4547.2.3.3.3.1.10 |
sasPortAddressSAS Port Address.ro DisplayWWN .1.3.6.1.4.1.4547.2.3.3.3.1.11 |
sasPhyStatisticsTableStores SAS specific I/O and error statistics for each SAS PHY. SEQUENCE OF SasPHYStatisticsEntry .1.3.6.1.4.1.4547.2.3.3.4 |
sasPhyStatisticsEntryStores statistics about SAS Phys. SasPHYStatisticsEntry .1.3.6.1.4.1.4547.2.3.3.4.1 |
sasPhyStatsIndexUsed to index the SAS PHY in the SAS PHY Statistics table. Integer32 .1.3.6.1.4.1.4547.2.3.3.4.1.1 |
sasPhyStatsTimeSinceResetAmount of time since the SAS PHY statistics were reset on this SAS PHY.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.4547.2.3.3.4.1.2 |
sasPhyStatsErrLinkChangedNumber of link changed events on this SAS PHY.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.4.1.3 |
sasPhyStatsErrInvalidCRCNumber of Invalid CRC events on this SAS PHY.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.4.1.4 |
sasPhyStatsErrPhyResetNumber of Phy Reset events on this SAS PHY.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.4.1.5 |
sasPhyStatsErrLossOfSyncNumber of loss of sync events on this SAS PHY.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.4.1.6 |
sasPhyStatsErrDisparityCountNumber of disparity error events on this SAS PHY.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.4.1.7 |
sasPhyStatsErrInvalidDwordsNumber of invalid DWORD events on this SAS PHY.rw Unsigned32 .1.3.6.1.4.1.4547.2.3.3.4.1.8 |
bridgeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.4 |
trapsEnabledIndicates whether traps are enabled or disabled.ro Enumeration .1.3.6.1.4.1.4547.2.3.4.1 |
snmpUpdatesEnabledIndicates whether SNMP updates are enabled or disabled.ro Enumeration .1.3.6.1.4.1.4547.2.3.4.2 |
bridgeTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.5 |
trapMaxClientsThe maximum number of SNMP trap recipients supported by this HW element.ro Integer32 .1.3.6.1.4.1.4547.2.3.5.1 |
trapClientTableStores a row for each IP address/port number configured to receive traps. SEQUENCE OF TrapClientEntry .1.3.6.1.4.1.4547.2.3.5.2 |
trapClientEntryIp/Port pair for a specific client. TrapClientEntry .1.3.6.1.4.1.4547.2.3.5.2.1 |
trapClientIndexUsed to index a trap client in the trapClientTable. Integer32 .1.3.6.1.4.1.4547.2.3.5.2.1.1 |
trapClientIpAddressThe IP address of a client registered for traps in dotted notation.ro DisplayString .1.3.6.1.4.1.4547.2.3.5.2.1.2 |
trapClientPortThe UDP port to send traps for this trap client. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.ro Integer32 .1.3.6.1.4.1.4547.2.3.5.2.1.3 |
trapClientFilterThis value defines the trap severity filter for this trap host. The unit will send traps to this trap client that have a severity level less than or equal to this value. The default value of this object is 'warning'.ro Enumeration .1.3.6.1.4.1.4547.2.3.5.2.1.4 |
bridgeMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.6 |
bridgeMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.6.1 |
bridgeBasicComplianceThe requirements for a bridge implementation. Unknown .1.3.6.1.4.1.4547.2.3.6.1.1 |
bridgeMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4547.2.3.6.2 |
bridgeIdentityBasicGroupThe bridge identity information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.1 |
bridgeChassisBasicGroupThe bridge chassis information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.2 |
bridgFcPortInfoBasicGroupThe bridge ports information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.3 |
bridgeFcPortStatisicsBasicGroupThe bridge ports information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.4 |
bridgeSasPortInfoBasicGroupThe bridge ports information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.5 |
bridgeSasPortStatisicsBasicGroupThe bridge ports information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.6 |
bridgeConfigBasicGroupThe bridge configuration information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.7 |
bridgeTrapInfoBasicGroupThe bridge trap information group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.8 |
bridgeTrapsBasicGroupThe bridge traps group. Unknown .1.3.6.1.4.1.4547.2.3.6.2.9 |
attoModules OBJECT IDENTIFIER .1.3.6.1.4.1.4547.3 |
attoAgentCapability OBJECT IDENTIFIER .1.3.6.1.4.1.4547.4 |