ATT-CNM-FRAME-RELAY-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATT-CNM-FRAME-RELAY-MIB.
41
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
att-2 OBJECT IDENTIFIER .1.3.6.1.4.1.74 |
RFC1213-MIB Unknown .1.3.6.1.4.1.74 |
att-products OBJECT IDENTIFIER .1.3.6.1.4.1.74.1 |
att-cnmAgent OBJECT IDENTIFIER .1.3.6.1.4.1.74.1.9 |
att-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.74.2 |
att-cnm OBJECT IDENTIFIER .1.3.6.1.4.1.74.2.15 |
att-cnm-fr OBJECT IDENTIFIER .1.3.6.1.4.1.74.2.15.7 |
attCNMfrConfigTableA list of entries containing configuration
information for all Frame Relay interfaces managed by
this system. SEQUENCE OF AttCNMfrConfigEntry .1.3.6.1.4.1.74.2.15.7.1 |
attCNMfrConfigEntryAn entry containing configuration information
for a particular Frame Relay interface. AttCNMfrConfigEntry .1.3.6.1.4.1.74.2.15.7.1.1 |
attCNMfrConfigIndexA unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance.ro INTEGER .1.3.6.1.4.1.74.2.15.7.1.1.1 |
attCNMfrMeasMaxIntervalsThis variable identifies the maximum number
of measurement intervals supported for the
measurements maintained by this Frame Relay
interface in the attCNMfrMeasTable.ro INTEGER .1.3.6.1.4.1.74.2.15.7.1.1.2 |
attCNMfrMeasIntervalLenThis variable identifies the number of seconds
that make up one complete measurement interval for
for the measurements maintained by this Frame Relay
interface in the attCNMfrMeasTable.ro INTEGER .1.3.6.1.4.1.74.2.15.7.1.1.3 |
attCNMfrPVCMeasMaxIntervalsThis variable identifies the maximum number
of measurement intervals supported for the
measurements maintained by this Frame Relay
interface in the attCNMfrPVCMeasTable.ro INTEGER .1.3.6.1.4.1.74.2.15.7.1.1.4 |
attCNMfrPVCMeasIntervalLenThis variable identifies the number of seconds
that make up one complete measurement interval for
for the measurements maintained by this Frame Relay
interface in the attCNMfrPVCMeasTable.ro INTEGER .1.3.6.1.4.1.74.2.15.7.1.1.5 |
attCNMfrMeasTableA list of entries containing measurement counts,
maintained during the specified measurement interval,
for all Frame Relay interfaces managed by this
system. SEQUENCE OF AttCNMfrMeasEntry .1.3.6.1.4.1.74.2.15.7.2 |
attCNMfrMeasEntryAn entry containing measurement counts, maintained
during the specified measurement interval, for a
particular Frame Relay interface. AttCNMfrMeasEntry .1.3.6.1.4.1.74.2.15.7.2.1 |
attCNMfrMeasIndexA unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance.ro INTEGER .1.3.6.1.4.1.74.2.15.7.2.1.1 |
attCNMfrMeasIntervalThis variable identifies the measurement interval
number for which measurement is provided. It is a
number between 1 and XX, where 1 identifies the most
recently completed measurement interval and XX is
the least recently completed measurement interval.
The value of XX is specified by the
attCNMfrMeasMaxIntervals object given in the
attCNMfrConfigTable.
The maximum length of each measurement interval is
specified by the attCNMfrMeasIntervalLen object given
in the attCNMfrConfigTable.ro INTEGER .1.3.6.1.4.1.74.2.15.7.2.1.2 |
attCNMfrMeasTimeStampThe time stamp corresponding to the end of the
specified measurement interval, as measured in
seconds from 00:00:00 UTC (Coordinated Universal
Time) January 1, 1970. Any fraction is rounded up.ro INTEGER .1.3.6.1.4.1.74.2.15.7.2.1.3 |
attCNMfrMeasLocalTimeThe time stamp corresponding to the end of the
specified measurement interval. Any fraction is
rounded up. It is given as a printable ASCII string
showing the local time at the end of the interval.ro DisplayString .1.3.6.1.4.1.74.2.15.7.2.1.4 |
attCNMfrReceivedOctetsThe counter associated with the number of bytes
received by this Frame Relay interface during the
specified measurement interval.ro Gauge .1.3.6.1.4.1.74.2.15.7.2.1.5 |
attCNMfrSentOctetsThe counter associated with the number of bytes
sent by this Frame Relay interface during the
specified measurement interval.ro Gauge .1.3.6.1.4.1.74.2.15.7.2.1.6 |
attCNMfrReceivedFramesThe counter associated with the number of frames
received by this Frame Relay interface during the
specified measurement interval.ro Gauge .1.3.6.1.4.1.74.2.15.7.2.1.7 |
attCNMfrSentFramesThe counter associated with the number of frames
received by this Frame Relay interface during the
specified measurement interval.ro Gauge .1.3.6.1.4.1.74.2.15.7.2.1.8 |
attCNMfrBadFramesThe counter associated with the number of frames
received by this interface that are faulty.
A bad frame could be a frame with a non-integral
number of octets, or an aborted frame, or a frame
with a bad Frame Check Sequence (FCS).ro Gauge .1.3.6.1.4.1.74.2.15.7.2.1.9 |
attCNMfrReceiverOverrunsThe counter associated with the number of receiver
overruns occurred at this interface during the
specified measurement interval.
A receiver overrun occurs when frames are received
faster than they can be stored and forwarded.ro Gauge .1.3.6.1.4.1.74.2.15.7.2.1.10 |
attCNMfrPVCMeasTableA list of entries containing PVC-level measurement
counts, maintained during the specified measurement
interval, for all the Frame Relay interfaces managed
by this system. SEQUENCE OF AttCNMfrPVCMeasEntry .1.3.6.1.4.1.74.2.15.7.3 |
attCNMfrPVCMeasEntryAn entry containing measurement counts, maintained
during the specified measurement interval, for a
particular PVC on a specific Frame Relay interface. AttCNMfrPVCMeasEntry .1.3.6.1.4.1.74.2.15.7.3.1 |
attCNMfrPVCMeasIfIndexA unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance.ro INTEGER .1.3.6.1.4.1.74.2.15.7.3.1.1 |
attCNMfrPVCMeasIndexThe DLCI number on a Frame Relay interface that
identifies a unique Data Link Connection.ro INTEGER .1.3.6.1.4.1.74.2.15.7.3.1.2 |
attCNMfrPVCMeasIntervalThis variable identifies the measurement interval
number for which measurement is provided. It is a
number between 1 and XX, where 1 identifies the most
recently completed measurement interval and XX is
the least recently completed measurement interval.ro INTEGER .1.3.6.1.4.1.74.2.15.7.3.1.3 |
attCNMfrPVCMeasTimeStampThe time stamp corresponding to the end of the
specified measurement interval, as measured in
seconds from 00:00:00 UTC (Coordinated Universal
Time) January 1, 1970. Any fraction is rounded up.ro INTEGER .1.3.6.1.4.1.74.2.15.7.3.1.4 |
attCNMfrPVCMeasLocalTimeThe time stamp corresponding to the end of the
specified measurement interval. Any fraction is
rounded up. It is given as a printable ASCII string
showing the local time at the end of the interval.ro DisplayString .1.3.6.1.4.1.74.2.15.7.3.1.5 |
attCNMfrCongestionAtIngressThe counter associated with the number of times
frames received by this PVC had to be discarded
because buffers were unavailable or congestion
control was being enforced during the specified
measurement interval.ro Gauge .1.3.6.1.4.1.74.2.15.7.3.1.6 |
attCNMfrCongestionAtEgressThe counter associated with the number of times
frames sent by this PVC had to be discarded
because buffers were unavailable or congestion
control was being enforced during the specified
measurement interval.ro Gauge .1.3.6.1.4.1.74.2.15.7.3.1.7 |
attCNMfrPVCStatusTableA list of entries containing status information
about Data Link Connections on Frame Relay interfaces
managed by this system. SEQUENCE OF AttCNMfrPVCStatusEntry .1.3.6.1.4.1.74.2.15.7.4 |
attCNMfrPVCStatusEntryAn entry containing status information about
a particular Data Link Connection on a specific
Frame Relay interface. AttCNMfrPVCStatusEntry .1.3.6.1.4.1.74.2.15.7.4.1 |
attCNMfrPVCStatusIfIndexA unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance.ro INTEGER .1.3.6.1.4.1.74.2.15.7.4.1.1 |
attCNMfrPVCStatusIndexThe DLCI number on a Frame Relay interface that
identifies a unique Data Link Connection.ro INTEGER .1.3.6.1.4.1.74.2.15.7.4.1.2 |
attCNMfrPVCAdminStatusThe desired state of this Data Link Connection.ro Enumeration .1.3.6.1.4.1.74.2.15.7.4.1.3 |
attCNMfrPVCOperStatusThe current operational state of this Data Link
Connection.ro Enumeration .1.3.6.1.4.1.74.2.15.7.4.1.4 |