ATT-CNM-DS3-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATT-CNM-DS3-MIB.
32
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
att-2 OBJECT IDENTIFIER .1.3.6.1.4.1.74 |
RFC1213-MIB Unknown .1.3.6.1.4.1.74 |
att-products OBJECT IDENTIFIER .1.3.6.1.4.1.74.1 |
att-cnmAgent OBJECT IDENTIFIER .1.3.6.1.4.1.74.1.9 |
att-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.74.2 |
att-cnm OBJECT IDENTIFIER .1.3.6.1.4.1.74.2.15 |
att-cnm-ds3 OBJECT IDENTIFIER .1.3.6.1.4.1.74.2.15.4 |
attCNMds3ConfigTableA list of entries containing configuration
information for all DS3 interfaces managed by
this system. SEQUENCE OF AttCNMds3ConfigEntry .1.3.6.1.4.1.74.2.15.4.1 |
attCNMds3ConfigEntryAn entry containing configuration information
for a particular DS3 interface. AttCNMds3ConfigEntry .1.3.6.1.4.1.74.2.15.4.1.1 |
attCNMds3ConfigIndexA unique value for each DS3 interface. The interface
identified by a particular value of this index is
the same interface as identified by the same value
of an attCNMifConfigIndex object instance.ro INTEGER .1.3.6.1.4.1.74.2.15.4.1.1.1 |
attCNMds3LineTypeThis variable indicates the variety of DS3 C-bit
application supported by this interface.
For SMDS, this variable will have the value
ds3ClearChannel, denoting that this interface supports
the clear-channel with C-bit usage unspecified as
specified by ANSI.ro Enumeration .1.3.6.1.4.1.74.2.15.4.1.1.2 |
attCNMds3ZeroCodingThis variable describes the variety of zero
code suppression/substitution used on the DS3
interface its characteristics.ro Enumeration .1.3.6.1.4.1.74.2.15.4.1.1.3 |
attCNMds3ErrorsMaxIntervalsThis variable identifies the maximum number
of measurement intervals supported for the
error counts maintained by this DS3 interface
in the attCNMds3ErrorsTable.ro INTEGER .1.3.6.1.4.1.74.2.15.4.1.1.4 |
attCNMds3ErrorsIntervalLenThis variable identifies the number of seconds
that make up one complete measurement interval for
the error counts maintained by this DS3 interface
in the attCNMds3ErrorsTable.ro INTEGER .1.3.6.1.4.1.74.2.15.4.1.1.5 |
attCNMds3StatusTableA list of entries containing status information
for all DS3 interfaces managed by this system. SEQUENCE OF AttCNMds3StatusEntry .1.3.6.1.4.1.74.2.15.4.2 |
attCNMds3StatusEntryAn entry containing status information for a
particular DS3 interface. AttCNMds3StatusEntry .1.3.6.1.4.1.74.2.15.4.2.1 |
attCNMds3StatusIndexA unique value for each DS3 interface. The interface
identified by a particular value of this index is
the same interface as identified by the same value
of an attCNMifConfigIndex object instance.ro INTEGER .1.3.6.1.4.1.74.2.15.4.2.1.1 |
attCNMds3LineStatusThis variable indicates the most Line Status
of this interface. This object is a bit map
represented as a sum, therefore, it can represent
multiple failures (alarms) simultaneously. The
various bit positions are:
1 No Alarm Present
2 Yellow Alarm
4 Near End Alarm-Indication-Signal
8 Near End Loss-Of-Frame
16 Near End Loss-Of-Signal
For example, for an interface that has LOF and
LOS outstanding, this object will have a value
of 24.ro INTEGER .1.3.6.1.4.1.74.2.15.4.2.1.2 |
attCNMds3ErrorsTableA list of entries containing protocol error counts,
maintained during the specified measurement interval,
for all DS3 interfaces managed by this system. SEQUENCE OF AttCNMds3ErrorsEntry .1.3.6.1.4.1.74.2.15.4.3 |
attCNMds3ErrorsEntryAn entry containing protocol error counts,
maintained during the specified measurement interval,
for a particular DS3 interface. AttCNMds3ErrorsEntry .1.3.6.1.4.1.74.2.15.4.3.1 |
attCNMds3ErrorsIndexA unique value for each DS3 interface. The interface
identified by a particular value of this index is
the same interface as identified by the same value
of an attCNMifConfigIndex object instance.ro INTEGER .1.3.6.1.4.1.74.2.15.4.3.1.1 |
attCNMds3ErrorsIntervalThis variable identifies the measurement interval
number for which measurement is provided. It is a
number between 1 and XX, where 1 identifies the most
recently completed measurement interval and XX is
the least recently completed measurement interval.
The value of XX is specified by the
attCNMds3ErrorsMaxIntervals object given in the
attCNMds3ConfigTable.
The maximum length of each measurement interval is
specified by the attCNMds3ErrorsIntervalLen object
given in the attCNMds3ConfigTable.ro INTEGER .1.3.6.1.4.1.74.2.15.4.3.1.2 |
attCNMds3ErrorsTimeStampThe time stamp corresponding to the end of the
specified measurement interval, as measured in
seconds from 00:00:00 UTC (Coordinated Universal
Time) January 1, 1970. Any fraction is rounded up.ro INTEGER .1.3.6.1.4.1.74.2.15.4.3.1.3 |
attCNMds3ErrorsLocalTimeThe time stamp corresponding to the end of the
specified measurement interval. Any fraction is
rounded up. It is given as a printable ASCII string
showing the local time at the end of the interval.ro DisplayString .1.3.6.1.4.1.74.2.15.4.3.1.4 |
attCNMds3LCVsThe counter associated with the number of Line
Code Violations encountered by a DS3 interface
during the specified measurement interval.
For a B3ZS-coded signal, a Line Code Violation is
the occurrence of a received bipolar violation that
is not part of a zero-substitution code. For a B3ZS
signal, an LCV may also include other error patterns
such as: three consecutive zeros and incorrect parity.
The Bipolar Violation Rate is generally viewed as
approximating the Bit Error Rate.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.5 |
attCNMds3LESsThe counter associated with the number of Line
Errored Seconds encountered by a DS3 interface
during the specified measurement interval.
A Line Errored Second is any second with at least
one Line Code Violation.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.6 |
attCNMds3LSESsThe counter associated with the number of Line
Severely Errored Seconds encountered by a DS3
interface during the specified measurement interval.
A Line Severely Errored Second is any second with
45 or more Line Code Violations monitored at the
DS3 rate.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.7 |
attCNMds3CVsThe counter associated with the number of Code
Violations encountered by a DS3 interface during
the specified measurement interval.
For SMDS, a DS3 Code Violation is an occurrence of
a P-bit error. Excessive Coding Violations signifies
a faulty transmission line.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.8 |
attCNMds3ESsThe counter associated with the number of Errored
Seconds encountered by a DS3 interface during the
specified measurement interval.
For SMDS DS3 signals, this is the number of seconds
during which at least one error occurred which is a
P-bit error or a Severely Errored Framing event.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.9 |
attCNMds3SESsThe counter associated with the number of Severely
Errored Seconds encountered by a DS3 interface
during the specified measurement interval.
For SMDS DS3 signals, this is the number of seconds
during which 44 or more P-bit errors occurred or at
least one Severely Errored Framing event occurred.
All Severely Errored Seconds are also counted as
Errored Seconds.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.10 |
attCNMds3SEFSsThe counter associated with the number of Severely
Errored Framing Seconds encountered by a DS3
interface during the specified measurement interval.
A Severely Errored Framing Second is any second
during which one or more Severely Errored Framing
(SEF) events occurred. A Severely Errored Framing
event is declared when 3 or more errors in 16 or fewer
consecutive F-bits occur within a DS3 M-frame.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.11 |
attCNMds3UASsThe counter associated with the number of
Unavailable Seconds encountered by a DS3
interface during the specified measurement interval.
An Unavailable Second is any second during which
the DS3 interface was unavailable to offer service.ro Gauge .1.3.6.1.4.1.74.2.15.4.3.1.12 |