ATT-CNM-DS1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATT-CNM-DS1-MIB.
32
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
att-2 OBJECT IDENTIFIER .1.3.6.1.4.1.74 |
RFC1213-MIB Unknown .1.3.6.1.4.1.74 |
att-products OBJECT IDENTIFIER .1.3.6.1.4.1.74.1 |
att-cnmAgent OBJECT IDENTIFIER .1.3.6.1.4.1.74.1.9 |
att-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.74.2 |
att-cnm OBJECT IDENTIFIER .1.3.6.1.4.1.74.2.15 |
att-cnm-ds1 OBJECT IDENTIFIER .1.3.6.1.4.1.74.2.15.3 |
attCNMds1ConfigTableA list of entries containing configuration
information for all DS1 interfaces managed by
this system. SEQUENCE OF AttCNMds1ConfigEntry .1.3.6.1.4.1.74.2.15.3.1 |
attCNMds1ConfigEntryAn entry containing configuration information
for a particular DS1 interface. AttCNMds1ConfigEntry .1.3.6.1.4.1.74.2.15.3.1.1 |
attCNMds1ConfigIndexA unique value for each DS1 interface. The interface
identified by a particular value of this index is
the same interface as identified by the same value
of an attCNMifConfigIndex object instance.ro INTEGER .1.3.6.1.4.1.74.2.15.3.1.1.1 |
attCNMds1LineTypeThis variable indicates the variety of DS1 frame
format supported by this interface.
For SMDS, this variable will have the value
ds1ANSI-ESF, denoting that this interface
supports the DS1 Extended Super Frame format
as specified by ANSI.ro Enumeration .1.3.6.1.4.1.74.2.15.3.1.1.2 |
attCNMds1ZeroCodingThis variable describes the variety of zero
code suppression/substitution used on the DS1
interface.ro Enumeration .1.3.6.1.4.1.74.2.15.3.1.1.3 |
attCNMds1ErrorsMaxIntervalsThis variable identifies the maximum number
of measurement intervals supported for the
error counts maintained by this DS1 interface
in the attCNMds1ErrorsTable.ro INTEGER .1.3.6.1.4.1.74.2.15.3.1.1.4 |
attCNMds1ErrorsIntervalLenThis variable identifies the number of seconds
that make up one complete measurement interval for
the error counts maintained by this DS1 interface
in the attCNMds1ErrorsTable.ro INTEGER .1.3.6.1.4.1.74.2.15.3.1.1.5 |
attCNMds1StatusTableA list of entries containing status information
for all DS1 interfaces managed by this system. SEQUENCE OF AttCNMds1StatusEntry .1.3.6.1.4.1.74.2.15.3.2 |
attCNMds1StatusEntryAn entry containing status information for a
particular DS1 interface. AttCNMds1StatusEntry .1.3.6.1.4.1.74.2.15.3.2.1 |
attCNMds1StatusIndexA unique value for each DS1 interface. The interface
identified by a particular value of this index is
the same interface as identified by the same value
of an attCNMifConfigIndex object instance.ro INTEGER .1.3.6.1.4.1.74.2.15.3.2.1.1 |
attCNMds1LineStatusThis variable indicates the most Line Status
of this interface. This object is a bit map
represented as a sum, therefore, it can represent
multiple failures (alarms) simultaneously. The
various bit positions are:
1 No Alarm Present
2 Yellow Alarm
4 Near End Alarm-Indication-Signal (AIS)
8 Near End Loss-Of-Frame (LOF)
16 Near End Loss-Of-Signal (LOS)
For example, for an interface that has LOF and
LOS outstanding, this object will have a value
of 24.ro INTEGER .1.3.6.1.4.1.74.2.15.3.2.1.2 |
attCNMds1ErrorsTableA list of entries containing protocol error counts,
maintained during the specified measurement interval,
for all DS1 interfaces managed by this system. SEQUENCE OF AttCNMds1ErrorsEntry .1.3.6.1.4.1.74.2.15.3.3 |
attCNMds1ErrorsEntryAn entry containing protocol error counts,
maintained during the specified measurement interval,
for a particular DS1 interface. AttCNMds1ErrorsEntry .1.3.6.1.4.1.74.2.15.3.3.1 |
attCNMds1ErrorsIndexA unique value for each DS1 interface. The interface
identified by a particular value of this index is
the same interface as identified by the same value
of an attCNMifConfigIndex object instance.ro INTEGER .1.3.6.1.4.1.74.2.15.3.3.1.1 |
attCNMds1ErrorsIntervalThis variable identifies the measurement interval
number for which the measurement is provided. It is
a number between 1 and XX, where 1 identifies the
most recently completed measurement interval and XX
is the least recently completed measurement interval.
The value of XX is specified by the
attCNMds1ErrorsMaxIntervals object given in the
attCNMds1ConfigTable.
The maximum length of each measurement interval is
specified by the attCNMds1ErrorsIntervalLen object
given in the attCNMds1ConfigTable.ro INTEGER .1.3.6.1.4.1.74.2.15.3.3.1.2 |
attCNMds1ErrorsTimeStampThe time stamp corresponding to the end of the
specified measurement interval, as measured in
seconds from 00:00:00 UTC (Coordinated Universal
Time) January 1, 1970. Any fraction is rounded up.ro INTEGER .1.3.6.1.4.1.74.2.15.3.3.1.3 |
attCNMds1ErrorsLocalTimeThe time stamp corresponding to the end of the
specified measurement interval. Any fraction is
rounded up. It is given as a printable ASCII string
showing the local time at the end of the interval.ro DisplayString .1.3.6.1.4.1.74.2.15.3.3.1.4 |
attCNMds1LCVsThe counter associated with the number of Line
Code Violations encountered by a DS1 interface
during the specified measurement interval.
A Line Code Violation is the occurrence of a
received Bipolar Violation that is not part of a
zero-substitution code.
The Bipolar Violation Rate is generally viewed as
approximating the Bit Error Rate.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.5 |
attCNMds1LESsThe counter associated with the number of Line
Errored Seconds encountered by a DS1 interface
during the specified measurement interval.
A Line Errored Second is any second with at least
one Line Code Violation.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.6 |
attCNMds1LSESsThe counter associated with the number of Line
Severely Errored Seconds encountered by a DS1
interface during the specified measurement interval.
A Line Severely Errored Second is any second with
16 or more Lince Code Violations monitored at the
DS1 rate.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.7 |
attCNMds1CVsThe counter associated with the number of Code
Violations encountered by a DS1 interface during
the specified measurement interval.
A Code Violation is the occurrence of a received
CRC-6 code that is not identical to the corresponding
locally-calculated code.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.8 |
attCNMds1ESsThe counter associated with the number of Errored
Seconds encountered by a DS1 interface during the
specified measurement interval.
An Errored Second is any second with at least one
Code Violation.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.9 |
attCNMds1SESsThe counter associated with the number of Severely
Errored Seconds encountered by a DS1 interface
during the specified measurement interval.
A Severely Errored Second is any second with 15 or
more Code Violations monitored at the DS1 rate.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.10 |
attCNMds1SEFSsThe counter associated with the number of Severely
Errored Framing Seconds encountered by a DS1
interface during the specified measurement interval.
A Severely Errored Framing Second is any second
during which one or more Severely Errored Framing
(SEF) events occurred.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.11 |
attCNMds1UASsThe counter associated with the number of
Unavailable Seconds encountered by a DS1
interface during the specified measurement interval.
An Unavailable Second is any second during which
the DS1 interface was unavailable to offer service.ro Gauge .1.3.6.1.4.1.74.2.15.3.3.1.12 |