ATMEL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATMEL-MIB.
123
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
123 total| Object Name |
|---|
internet OBJECT IDENTIFIER .1.3.6.1 |
directory OBJECT IDENTIFIER .1.3.6.1.1 |
mgmt OBJECT IDENTIFIER .1.3.6.1.2 |
experimental OBJECT IDENTIFIER .1.3.6.1.3 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
atmel OBJECT IDENTIFIER .1.3.6.1.4.1.12350 |
trapReassociationThis trap message is sent when a STAtion's reassosiation request is received. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.1 |
trapRoamOutThis trap message is used to indicate that a STAtion has roamed out of the Wireless bridge's coverage area. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.2 |
trapAssociationIndicates the reception of an association request packet and the sender STAtion's successful association with the Access Point. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.3 |
trapDisassociationThis trap message is sent when a disassociation notification packet is received from a STAtion. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.4 |
trapAssociationExpireThis trap message is sent when the association's maximum time interval expires for an associated STAtion. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.5 |
trapResetThis trap message is sent when Access Point Resets. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.6 |
trapSettingPingIPAddressThis trap message is sent when the Access Point IP address is set with the transmition of a ping message. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.7 |
trapStartUpThis trap message is sent when Access Point Starts Up. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.8 |
trapFailedToEraseFlashThis trap message is sent when Access Point Failed To Erase Flash. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.9 |
trapAPClientScanningAccess Point Client is scanning... NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.10 |
trapAPClientAuthenticatingAccess Point Client is authenticating with the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.11 |
trapAPClientAssociatingAccess Point Client is associating with the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.12 |
trapAPClientReAssociatingAccess Point Client is reassociating with the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.13 |
trapAPClientAuthenticationFailedAccess Point Client has failed authenticating with the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.14 |
trapAPClientAssociationFailedAccess Point Client has failed associating with the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.15 |
trapAPClientConnectedAccess Point Client has been connected with the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.16 |
trapAPClientDisconnectedAccess Point Client has been disconnected from the AP. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.17 |
trapAPClientScanFailedAccess Point Client has failed scanning! NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.18 |
trapAPClientJoinFailedAccess Point Client has failed joining! NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.19 |
trapAPClientJoiningAccess Point Client is in join state. NOTIFICATION-TYPE .1.3.6.1.4.1.12350.0.20 |
atmelmib OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1 |
atmelSys OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1 |
sysCtrlGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.1 |
sysDescrA textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.ro DisplayString .1.3.6.1.4.1.12350.1.1.1.1 |
sysResetBy setting this attribute enable(1), a reset command to the system is issued.rw Enumeration .1.3.6.1.4.1.12350.1.1.1.2 |
sysTrapSwitchThis attribute enables the transmission of SNMP.V1 TRAPs.rw Enumeration .1.3.6.1.4.1.12350.1.1.1.3 |
sysLoadDefaultsSetting this attribute to enable(1), will cause the system to load the factory default values of all the operational parameters.rw Enumeration .1.3.6.1.4.1.12350.1.1.1.4 |
sysDeviceInfoFirst 92 bytes of Hardware device configuration struct. HARD_CONFIGURATION_STUCT{ unsigned long StructVersion; unsigned char MacAddress[6]; unsigned char Channel; unsigned char RegulatoryDomain; unsigned long ProductType; unsigned char OEMname[32]; unsigned long OEMID; unsigned char ProductName[32]; unsigned long HardwareRevision; unsigned char PID_VID[4]; //Product ID/ Vendor ID unsigned int sysOIDSize; unsigned short sysOID[16]; unsigned char CountryCode[3]; unsigned char Reserved1; unsigned short ChannelInformation; unsigned char Reserved2[2]; char TxPower[14]; unsigned char Reserved3[10]; }rw OCTET STRING .1.3.6.1.4.1.12350.1.1.1.5 |
sysUploadBy setting this attribute enable(1), a Upload configuration command to the system is issued.rw Enumeration .1.3.6.1.4.1.12350.1.1.1.6 |
siteSurveyCommandBy setting this attribute enable(1), a Site Survey command to the system is issued.rw Enumeration .1.3.6.1.4.1.12350.1.1.1.7 |
sysDeviceMoreInfoLast 32 bytes of Hardware device configuration struct. HARD_CONFIGURATION_STUCT{ unsigned long StructVersion; unsigned char MacAddress[6]; unsigned char Channel; unsigned char RegulatoryDomain; unsigned long ProductType; unsigned char OEMname[32]; unsigned long OEMID; unsigned char ProductName[32]; unsigned long HardwareRevision; unsigned char PID_VID[4]; //Product ID/ Vendor ID unsigned int sysOIDSize; unsigned short sysOID[16]; unsigned char CountryCode[3]; unsigned char Reserved1; unsigned short ChannelInformation; unsigned char Reserved2[2]; char TxPower[14]; unsigned char Reserved3[10]; }rw OCTET STRING .1.3.6.1.4.1.12350.1.1.1.8 |
operBridgingLevel OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.2 |
operIPAddressThe IP address of this device used over its Ethernet or Wireless LAN port.rw IpAddress .1.3.6.1.4.1.12350.1.1.2.1 |
operIPMaskThe IP Network mask used by the IP entity when accessing devices through any of its LAN Ports (Ethernet or WLAN).rw IpAddress .1.3.6.1.4.1.12350.1.1.2.2 |
operEthernetAddressThe MAC Address of the Ethernet interface.ro OCTET STRING .1.3.6.1.4.1.12350.1.1.2.3 |
operGatewayGateway default IP address.rw IpAddress .1.3.6.1.4.1.12350.1.1.2.4 |
operDHCPWhen setting this attribute to enable(1), the system will enable DHCP protocol.rw Enumeration .1.3.6.1.4.1.12350.1.1.2.5 |
operPrimaryPortThis attribute indicates the primaty port.Ethernet or Wireless.rw Enumeration .1.3.6.1.4.1.12350.1.1.2.6 |
operConfigurationPortThis attribute indicates the Configuration port.Ethernet or Wireless or Both of them.rw Enumeration .1.3.6.1.4.1.12350.1.1.2.7 |
operTrapPortThis attribute indicates the Trap port.rw INTEGER .1.3.6.1.4.1.12350.1.1.2.8 |
operFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.3 |
operIPFilterWhen setting this attribute to enable(1), the system will filter out all non IP-traffic.rw Enumeration .1.3.6.1.4.1.12350.1.1.3.1 |
operForwarbBcastWhen setting this attribute to disable(2), the system will not forward broadcast traffic to the Wireless Port.rw Enumeration .1.3.6.1.4.1.12350.1.1.3.2 |
operSendBackBcastWhen setting this attribute to disable(2), the system will not send back broadcast traffic to the Wireless Port.rw Enumeration .1.3.6.1.4.1.12350.1.1.3.3 |
operSendBackUnicastWhen setting this attribute to disable(2), the system will not send back unicast traffic to the Wireless Port.rw Enumeration .1.3.6.1.4.1.12350.1.1.3.4 |
operBridgeOperationalMode OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.4 |
bridgeOperationalModeThe Operational Mode of Bridge. Access Point, Access Point client, Wireless Bridge Point to Point, Wireless Bridge Point to MultiPoint.rw Enumeration .1.3.6.1.4.1.12350.1.1.4.1 |
bridgeRemoteBridgeBSSIDThe Preferred BSSID if the device is at Access Point client mode or the remote Mac if the device is at Wireless Bridge Point to Point mode.rw OCTET STRING .1.3.6.1.4.1.12350.1.1.4.2 |
dot1dStatic OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.5 |
staticMacFilterNumThis parameter's value indicates the number of the currently static MAC filters.rw INTEGER .1.3.6.1.4.1.12350.1.1.5.1 |
dot1dStaticTableA table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses. SEQUENCE OF Dot1dStaticEntry .1.3.6.1.4.1.12350.1.1.5.2 |
dot1dStaticEntryFiltering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded. Dot1dStaticEntry .1.3.6.1.4.1.12350.1.1.5.2.1 |
dot1dStaticAddressThe destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.rw OCTET STRING .1.3.6.1.4.1.12350.1.1.5.2.1.1 |
protocolFilterGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.6 |
protocolFilterNumThis parameter's value indicates the number of the currently protocol filters.rw INTEGER .1.3.6.1.4.1.12350.1.1.6.1 |
protocolFilterTableA table containing filtering information configured into the bridge by (local or network) management specifying the set of protocol filter. SEQUENCE OF ProtocolFilterEntry .1.3.6.1.4.1.12350.1.1.6.2 |
protocolFilterEntryFiltering information configured into the bridge by (local or network) management specifying the set of protocol filter. ProtocolFilterEntry .1.3.6.1.4.1.12350.1.1.6.2.1 |
protocolFilterCodeThe protocol code configured into the bridge by (local or network) management specifying the set of protocol filter.rw OCTET STRING .1.3.6.1.4.1.12350.1.1.6.2.1.1 |
protocolFilterDescriptionA textual description of the protocol.rw DisplayString .1.3.6.1.4.1.12350.1.1.6.2.1.2 |
protocolFilterActivityThis object indicates the status of this filter.rw Enumeration .1.3.6.1.4.1.12350.1.1.6.2.1.3 |
ethStatisticsGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.7 |
ethRxStatisticsEthernet Rx Statistics EthernetRxStatistics{ unsigned long TotalBytesRx; unsigned long TotalPacketsRx; unsigned long PacketCRCErrorRx; unsigned long MulticastPacketRx; unsigned long BroadcastPacketRx; unsigned long ControlFramesRx; unsigned long PauseFramesRx; unsigned long UnknownOPCodeRx; unsigned long AlignmentRxError; unsigned long LengthOutOfRangeRx; unsigned long CodeErrorRx; unsigned long FalseCarrierRx; unsigned long UndersizePacketsRx; unsigned long OversizePacketsRx; unsigned long TotalFragmentsRx; unsigned long TotalJabberRx; }ro OCTET STRING .1.3.6.1.4.1.12350.1.1.7.1 |
ethTxStatisticsEthernet Tx Statistics EthernetTxStatistics{ unsigned long TotalBytesTx; unsigned long TotalPacketsTx; unsigned long PacketCRCErrorTx; unsigned long MulticastPacketTx; unsigned long BroadcastPacketTx; unsigned long UnicastPacketTx; unsigned long PauseFramesTx; unsigned long SingleDeferPacketTx; unsigned long MultiDeferPacketsTx; unsigned long SingleCollisionsTx; unsigned long MultiCollisionsTx; unsigned long LateCollisionsTx; unsigned long ExcessiveCollisionTx; unsigned long TotalCollisionsTx; }ro OCTET STRING .1.3.6.1.4.1.12350.1.1.7.2 |
testModeSettingsGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.8 |
testModeOnOffWhen setting this attribute to enable(1), the device be at test mode.rw Enumeration .1.3.6.1.4.1.12350.1.1.8.1 |
testModeCommandStructtypedef struct __CONT_PKT_TX { UINT8 Channel; UINT8 Antenna; UINT8 TxPower; UINT8 TxRate; UINT8 TxFilter; UINT8 Reserved; UINT16 IFrameTime; UINT32 FrameLength; UINT32 FramesToTransmit; UINT8 Pattern; UINT8 Reserved1[3]; }CONT_PKT_TX;rw OCTET STRING .1.3.6.1.4.1.12350.1.1.8.2 |
testModeRadioConfigurationConfiguration of radio derived from tests. CR17 Reg 1-14, CR20 Reg 1-14, CR21 Reg 1-14, CR1, CR2, CR3, CR28, CR29rw OCTET STRING .1.3.6.1.4.1.12350.1.1.8.8 |
testModeStatisticsStatistics derive from tests TestModeStatistics{ unsigned long SuccessFrames; unsigned long FailedFrames; unsigned long PacketsTx; }ro OCTET STRING .1.3.6.1.4.1.12350.1.1.8.9 |
authorizedSettingsGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.1.9 |
authorizedUserPassThe community name of User.rw OCTET STRING .1.3.6.1.4.1.12350.1.1.9.1 |
authorizedAdminPassThe community name of Administrator.rw OCTET STRING .1.3.6.1.4.1.12350.1.1.9.2 |
authorizedManufactPassThe community name of Manufacturer.rw OCTET STRING .1.3.6.1.4.1.12350.1.1.9.3 |
wireless OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2 |
operationalSettingsGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.1 |
operChannelIDThe operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2.rw Enumeration .1.3.6.1.4.1.12350.1.2.1.1 |
operESSIDLengthThe ESSID Lengthrw INTEGER .1.3.6.1.4.1.12350.1.2.1.2 |
operESSIDThe network name. The size of the network name should not be more than 32 characters long.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.1.3 |
operRTSThresholdThis attribute indicates the number of bytes in an MPDU (frame), above which an RTS/CTS handshake will be performed. Setting this attribute to be larger than the maximum frame size, will prevent the RTS/CTS handshake for frames trassmitted by this station.rw INTEGER .1.3.6.1.4.1.12350.1.2.1.4 |
operFragmentationThresholdThis attribute indicates the number of bytes in an MPDU (frame), above which MPDU fragmentation will be performed.rw INTEGER .1.3.6.1.4.1.12350.1.2.1.5 |
operPreambleTypeThis parameter's value indicates the Preamble Type of device. Short or Long.rw Enumeration .1.3.6.1.4.1.12350.1.2.1.6 |
operAuthenticationTypeThis attribute indicates the authentication algorithm used during the authentication sequence. The value of this attribute is one of the following: 1 - Open System, 2 - Shared Key 3 - Both Typerw Enumeration .1.3.6.1.4.1.12350.1.2.1.7 |
operBasicRatesThis attribute indicates the basic and supported rates of Access Point.Valid format is as defind in ISO/IEC 8802-11:1999rw OCTET STRING .1.3.6.1.4.1.12350.1.2.1.8 |
operAutoRateFallBackThis attribute indicates if Auto Rate Fall Back is enable or disable.rw Enumeration .1.3.6.1.4.1.12350.1.2.1.9 |
operAccessPointNameThe AP name.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.1.10 |
operSSIDBroadcastingThis attribute indicates if SSID is broadcasting or not.rw Enumeration .1.3.6.1.4.1.12350.1.2.1.11 |
operAntennaSettings.rw INTEGER .1.3.6.1.4.1.12350.1.2.1.12 |
operInterRoaming.rw INTEGER .1.3.6.1.4.1.12350.1.2.1.13 |
operBeaconPeriod.rw INTEGER .1.3.6.1.4.1.12350.1.2.1.14 |
operDTIM.rw INTEGER .1.3.6.1.4.1.12350.1.2.1.15 |
privacyGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.2 |
defaultWEPKey1A WEP default secret key value.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.2.1 |
defaultWEPKey2A WEP default secret key value.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.2.2 |
defaultWEPKey3A WEP default secret key value.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.2.3 |
defaultWEPKey4A WEP default secret key value.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.2.4 |
privacyWEPEnableThis attribute, when enable64(1) or enable128(3), indicates that the 802.11 standard encryption mechanism (WEP) is implemented. WEP64, WEP128 or disablerw Enumeration .1.3.6.1.4.1.12350.1.2.2.5 |
privacyDefaultWEPKeyIDThis attribute shall indicate the use of the first, second, third or fourth DefaultWEPKey when set to values of one, two, three or four.rw INTEGER .1.3.6.1.4.1.12350.1.2.2.6 |
wlstatisticsGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.3 |
wirelessStatisticsWireless Statistics. 22 elements(ULONG) WirelessStatistics{ unsigned long UnicastTransmittedPackets; unsigned long BroadcastTransmittedPacets; unsigned long MulticastTransmittedPackets; unsigned long TransmittedBeacon; unsigned long TransmittedACK; unsigned long TransmittedRTS; unsigned long TransmittedCTS; unsigned long UnicastReceivedPackets; unsigned long BroadcastReceivedPackets; unsigned long MulticastReceivedPackets; unsigned long ReceivedBeacon; unsigned long ReceivedACK; unsigned long ReceivedRTS; unsigned long ReceivedCTS; unsigned long ACKFailure; unsigned long CTSFailure; unsigned long RetryPackets; unsigned long ReceivedDuplicate; unsigned long FailedPackets; unsigned long AgedPackets; unsigned long FCSError; unsigned long InvalidPLCP; }ro OCTET STRING .1.3.6.1.4.1.12350.1.2.3.1 |
wlSiteSurveyGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.4 |
channelStatus.ro OCTET STRING .1.3.6.1.4.1.12350.1.2.4.1 |
associatedStationsGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.5 |
associatedSTAsNumThis parameter's value indicates the number of the currently associated STAtions. Associated STAtions should not be more than 2007.ro INTEGER .1.3.6.1.4.1.12350.1.2.5.1 |
associatedSTAsInfoThe associated STAtion's Information. AssociatedSTAsInfo{ unsigned sort Num; unsigned char MacAddress[6]; }ro OCTET STRING .1.3.6.1.4.1.12350.1.2.5.2 |
authorizedMacAddressesGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.6 |
authorizationMacEnableWhen setting this attribute to 1, the Authorization Mac Address Table will be enabled in allow mode. When setting this attribute to 3, the Authorization Mac Address Table will be enabled in deny mode.rw INTEGER .1.3.6.1.4.1.12350.1.2.6.1 |
authorizedMacThe Authorized Wireless Mac Addresses AuthorizedMacTableString{ unsigned sort Action; //Set 0x01 or Get 0x02 unsigned sort NumOfAllTableAddresses; unsigned sort NumOfCurrentAddress; unsigned char MacAddress[6]; }rw OCTET STRING .1.3.6.1.4.1.12350.1.2.6.2 |
wlKnownAPGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.7 |
wirelessKnownAPs.ro OCTET STRING .1.3.6.1.4.1.12350.1.2.7.1 |
selectedBSSListNumber.rw INTEGER .1.3.6.1.4.1.12350.1.2.7.2 |
advancedPrivacyGRP OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.2.8 |
dot1xEnable.rw Enumeration .1.3.6.1.4.1.12350.1.2.8.1 |
broadcastKeyPeriod.rw INTEGER .1.3.6.1.4.1.12350.1.2.8.2 |
serverIP.rw IpAddress .1.3.6.1.4.1.12350.1.2.8.3 |
serverSecret.rw OCTET STRING .1.3.6.1.4.1.12350.1.2.8.4 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.12350.1.3 |
trapSTAMacAddressThe MAC address of a station devicero OCTET STRING .1.3.6.1.4.1.12350.1.3.1 |