ARTEM-COMPOINT-BLD-MIB
The ARTEM-COMPOINT-BLD-MIB module enables monitoring of broken link detection status and associated link failure attributes on Funkwerk artem communication hardware. It exposes vendor-specific counters and states to identify and track connectivity interruptions not covered by standard MIB definitions.
Imported Objects
Objects
14 total| Object Name |
|---|
artemFunkwerk Enterprise Communications MIB file that provides
additional attributes not covered by standard MIBs
for Broken Link Detection in artem products. MODULE-IDENTITY .1.3.6.1.4.1.4280 |
artemBLDDefinitions and attributes for Broken Link Detection. OBJECT IDENTIFIER .1.3.6.1.4.1.4280.6 |
artemBLDAdminStatusThis attribute selects whether periodic
BLD link checking is administratively enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4280.6.1 |
artemBLDLinkStateThis attribute indicates whether the IP target
monitored by BLD is currently reachable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4280.6.2 |
artemBLDTargetAddressThis attribute holds the IP address of the
connection target which is periodically checked by BLD.rw IpAddress .1.3.6.1.4.1.4280.6.3 |
artemBLDTargetIfThis attribute hold the ifIndex of the interface that
received the most recent reply from the BLD target.
The value 0 indicates that no reply has been received.ro INTEGER .1.3.6.1.4.1.4280.6.4 |
artemBLDCheckIntervalThis is the interval between successive
checks whether the BLD target is reachable.rw INTEGER .1.3.6.1.4.1.4280.6.5 |
artemBLDTimeoutThis attribute defines the timeout for
replies from the BLD target.rw INTEGER .1.3.6.1.4.1.4280.6.6 |
artemBLDRetriesThis attribute defines the number of timer BLD
retries to reach the target after an initial failed
attempt until the connection is considered broken.rw INTEGER .1.3.6.1.4.1.4280.6.7 |
artemBLDIfTableThis is table of all interfaces which will be modified
when BLD detects that its target is unreachable.
AP type interfaces are temporarily closed and will
not allow any client to associate.
Bridge type interfaces are unlocked if their operational
status is disabled(2). SEQUENCE OF ArtemBLDIfEntry .1.3.6.1.4.1.4280.6.8 |
artemBLDIfEntryAn entry in artemBLDIfTable. ArtemBLDIfEntry .1.3.6.1.4.1.4280.6.8.1 |
artemBLDIfRowStatusAuxiliary variable for creation of new object instances
and/or the deletion of existing object instances.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4280.6.8.1.1 |
artemBLDNotification OBJECT IDENTIFIER .1.3.6.1.4.1.4280.6.9 |
artemBLDConnectionThis notification is triggered for every interface in
artemBLDIfTable whenever BLD detects a change in target
link state. NOTIFICATION-TYPE .1.3.6.1.4.1.4280.6.9.1 |
More MIBs from Funkwerk Enterprise
Browse all Funkwerk EnterpriseMIBs →The ARTEM-COMPOINT-WLAN-MIB extends standard SNMP monitoring for Funkwerk Artem WLAN access points and controllers by exposing vendor-specific attributes for radio interface status, client association states, and signal quality metrics not defined in generic MIBs.
The ARTEM-COMPOINT-FILTER-MIB enables monitoring and configuration of Layer-2 protocol filtering and MAC address-based access control lists on Funkwerk Artem network devices. This module exposes vendor-specific attributes for managing frame filtering rules and traffic enforcement policies not defined in standard MIBs.