ARCserve-Alarm-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ARCserve-Alarm-MIB.
25
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
cheyenne OBJECT IDENTIFIER .1.3.6.1.4.1.46 |
RFC1155-SMI Unknown .1.3.6.1.4.1.46 |
arcServe OBJECT IDENTIFIER .1.3.6.1.4.1.46.877 |
arcServetrapHighARCServe Critical Trap.
A Critical trap has been generated by ARCServe.
Refer to the trap summary information for a detailed
description of this trap. A critical trap normally
indicates a serious error has occurred. TRAP-TYPE .1.3.6.1.4.1.46.877.0.1 |
arcServetrapMedARCServe Minor Trap.
A minor trap has been generated by ARCServe. Minor
traps are used by ARCServe to warn the user of unusual,
but not fatal incidents. Review the message summary to
determine if this trap should concern you. TRAP-TYPE .1.3.6.1.4.1.46.877.0.2 |
arcServetrapLowARCServe Informational Trap.
An ARCServe informational trap has been generated by
ARCServe. TRAP-TYPE .1.3.6.1.4.1.46.877.0.3 |
arcServetrap4Failed to attach to queue.
This trap signifies that ARCServe was unable to locate
it's queue. This could be caused by Bindery or Directory
Services corruption. This problem can also occur if the
ARCServe queue has been deleted. Please verify that the
ARCServe queue exists before attempting to continue. TRAP-TYPE .1.3.6.1.4.1.46.877.0.4 |
arcServetrap5Failed to service the job in queue.
This trap signifies that ARCServe cannot remove jobs
from it's queue. This is normally due to a Bindery or
Directory Services corruption. Please verify that ARCserve
was completely installed and that your Bindery/Directory is
not corrupted. TRAP-TYPE .1.3.6.1.4.1.46.877.0.5 |
arcServetrap6Failed to allocate memory.
This trap signifies that ARCServe was unable to allocate
memory. More server memory may be required if this message
occurs on a regular basis. This message is not normally
fatal, unless repeated attempts for memory fail. TRAP-TYPE .1.3.6.1.4.1.46.877.0.6 |
arcServetrap7Server is low on memory, cannot start jobs.
This trap signifies that server is so low on memory
that jobs cannot be processed. Unload any unnecessary
modules to obtain additional memory so jobs can be
processed. Jobs will be processed when memory has
been restored on the server. TRAP-TYPE .1.3.6.1.4.1.46.877.0.7 |
arcServetrap8Same license found on another server.
This trap signifies that another server has the same
license as the server which generated the server. You
must install different licenses on each ARCServe server. TRAP-TYPE .1.3.6.1.4.1.46.877.0.8 |
arcServetrap9Failed to format tape.
This trap signifies that ARCServe was unable to format
a tape. This could be caused by hardware or media failure.
Verify tape drive has been cleaned and all cable connections.
This message can also occur when an invalid board driver has
been loaded. TRAP-TYPE .1.3.6.1.4.1.46.877.0.9 |
arcServetrap10Failed to read tape header.
This trap signifies a hardware or device failure when trying
to read the tape header. Verify that the tape is an ARCserve
formatted tape. Also verify that the tape drive has been
cleaned and all cables are properly connected. This message
can also be displayed when an invalid board driver has been
loaded. TRAP-TYPE .1.3.6.1.4.1.46.877.0.10 |
arcServetrap11Failed to position tape.
This trap signifies that ARCServe was unable to position
the tape. Also verify that the tape drive has been
cleaned and all cables are properly connected. This message
can also be displayed when an invalid board driver has been
loaded. TRAP-TYPE .1.3.6.1.4.1.46.877.0.11 |
arcServetrap12Backup Operation Cancelled.
This trap signifies that an operator has cancelled an
ARCServe job. TRAP-TYPE .1.3.6.1.4.1.46.877.0.12 |
arcServetrap13Backup Operation Successful.
This trap signifies that the backup operation completed
successfully. TRAP-TYPE .1.3.6.1.4.1.46.877.0.13 |
arcServetrap14Backup Operation Incomplete.
This trap signifies that the backup operation completed with
warnings. Refer to the activity log to determine if important
nodes selected for backup have been missed. TRAP-TYPE .1.3.6.1.4.1.46.877.0.14 |
arcServetrap15Backup Operation Failed.
This trap signifies that the backup operation failed. This message
indicates that the backup encountered processing errors. Refer to
the activity log for a description of the problems encountered
when the backup failed. TRAP-TYPE .1.3.6.1.4.1.46.877.0.15 |
arcServeNLMRev OBJECT IDENTIFIER .1.3.6.1.4.1.46.877.1 |
arcServeNLMRevMajorThe major revision level of the NLM (left of the decimal).
Used for presence checking.ro INTEGER .1.3.6.1.4.1.46.877.1.1 |
arcServeNLMRevMinorThe minor revision level of the NLM (right of the decimal).ro INTEGER .1.3.6.1.4.1.46.877.1.2 |
arcServeParmsTrapEnableIndicates whether agent should or should not send traps.rw INTEGER .1.3.6.1.4.1.46.877.2 |
arcServeParmsPollTimeSeconds between checking for traps.rw INTEGER .1.3.6.1.4.1.46.877.3 |
arcServeServerNameNetWare Server Which Generated Error.ro OCTET STRING .1.3.6.1.4.1.46.877.4 |
arcServetrapdescA description of a specific Cheyenne trap.ro OCTET STRING .1.3.6.1.4.1.46.877.5 |