APPACCELERATION-STATUS-MIB
AI MIB Summary
The APPACCELERATION-STATUS-MIB enables SNMP monitoring of operational state variables for Citrix Application Acceleration (NetScaler) appliances, specifically tracking device health, service availability, and acceleration engine status.
This module defines the status variables that can be retrieved from a Citrix Application Acceleration unit.
Main OID:
appAccelerationStatusMIB.1.3.6.1.4.1.3845.30.4.1
186
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
186 total| Object Name |
|---|
appAccelerationStatusMIBThis module defines the status variables that can be
retrieved from a Citrix Application Acceleration unit. MODULE-IDENTITY .1.3.6.1.4.1.3845.30.4.1 |
wsStatusMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.1 |
wsStatusMIBScalars OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.1.1 |
wsOperStatusThe current operational state of the unit.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.1 |
wsLoad1MinThe 1 minute load average that is also available in the
Unix TOP or UPTIME commands. It reports the average number
of processes ready to be run. The value is computed by
taking the load average value and multiplying it by 100,
then converting the value to an integer.rodeprecated INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.2 |
wsLoad5MinThe 5 minute load average that is also available in the
Unix TOP or UPTIME commands. It reports the average number
of processes ready to be run. The value is computed by
taking the load average value and multiplying it by 100,
then converting the value to an integer.rodeprecated INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.3 |
wsLoad15MinThe 15 minute load average that is also available in the
Unix TOP or UPTIME commands. It reports the average number
of processes ready to be run. The value is computed by
taking the load average value and multiplying it by 100,
then converting the value to an integer.rodeprecated INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.4 |
wsBypassTraffic processing status.
This is also available in the GUI Features page.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.5 |
wsLastAlarmSeqNumThe value of the alarm sequence number for the last alarm generated
as a trap.ro AppAccelerationSeqNum (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.1.6 |
wsBoostStatusThe selected boost mode. This is also available in the
GUI Bandwidth Management page.rodeprecated Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.7 |
wsBandwidthModeThe selected bandwidth usage. This is also available in the
GUI Bandwidth Management page.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.8 |
wsBandwidthLimitSend bandwidth limit. This is also available
in the GUI Bandwidth Management page.ro INTEGER UNITS "K-Bits/sec" .1.3.6.1.4.1.3845.30.4.1.1.1.9 |
wsWanOutOctetsNumber of accelerated octets transmitted on the WAN side.
This is also available in the GUI Usage Graph page.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.1.10 |
wsWanInOctetsNumber of accelerated octets received on the WAN side.
This is also available in the GUI Usage Graph page.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.1.11 |
wsLanOutOctetsNumber of accelerated octets transmitted on the LAN side.
This is also available in the GUI Usage Graph page.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.1.12 |
wsLanInOctetsNumber of accelerated octets received on the LAN side.
This is also available in the GUI Usage Graph page.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.1.13 |
wsCompressionEffectiveBandwidthThe equivalent throughput before compression.
This is also available in the GUI Compression
Status page. This variable may be reset from
the above web page.ro INTEGER UNITS "K-Bits/sec" .1.3.6.1.4.1.3845.30.4.1.1.1.14 |
wsSendCompressionRatioAverage send compression rate per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
This is also available in the GUI Compression
Status page. This variable may be reset from
the above web page.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.15 |
wsReceiveCompressionRatioAverage receive compression rate per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
This is also available in the GUI Compression
Status page. This variable may be reset from
the above web page.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.16 |
wsCompressionStatsCollectionTimeThe number of centiseconds (0.01 seconds) since the start
of the compression statistics collection. This is also
available in the GUI Compression Status page.
This variable may be reset from the above web page.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3845.30.4.1.1.1.17 |
wsAcceleratedConnectionsNumber of current accelerated (active + inactive) connections.
This is also available in the GUI System Status page.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.18 |
wsNonAcceleratedConnectionsNumber of current non-accelerated connections.
This is also available in the GUI System Status page.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.19 |
wsHaStateHigh availability state of the unit.
This is also available in the GUI High Availability page.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.20 |
wsHaVmIpVirtual Management IP Address used in HA setup.
This is also available in the GUI High Availability page.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.1.21 |
wsHaSecondaryIpWhen retrieved from the primary unit (in HA configuration),
this is the IP Address of the secondary unit.
When retrieved from a secondary or standalone unit,
this is 0.0.0.0.
This is also available in the GUI High Availability page.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.1.22 |
wsPrimaryIpIP Address of the Primary Port,
which is for management data.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.1.23 |
wsCpuUsageAveraged percent CPU used by the traffic accelerator
in the last minute.ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.1.24 |
wsConnectedPlugInsCurrent number of Plug-ins connected to this unit.
This is also available in the GUI System Status page.ro Counter .1.3.6.1.4.1.3845.30.4.1.1.1.25 |
wsMaxPlugInsThe Maximum number of Plug-ins that are allowed to connect
to this unit. This is also available in the GUI
System Status page.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.26 |
wsQosStatsCollectionTimeThe number of centiseconds (0.01 seconds) since the start
of the QoS and ICA statistics collection. This is also
available in the GUI QoS Statistics page.
This variable may be reset from the above web page.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3845.30.4.1.1.1.27 |
wsUpTimeThe time (in hundredths of a second) since the unit
was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3845.30.4.1.1.1.28 |
wsSerialNumberAppliance serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.1.29 |
wsNonAcceleratedVolumeTotal non-accelerated k-bytes received by the unit, on all interfaces.ro Counter64 UNITS "1000-Octets" .1.3.6.1.4.1.3845.30.4.1.1.1.30 |
wsActiveConnectionsNumber of active accelerated connections.
This is also available in the GUI System Status page.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.1.31 |
wsAccelerationStatusTraffic acceleration (flow control and compression) status.
This is also available in the GUI Features page.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.32 |
wsTrafficShapingStatusTraffic shaping (QoS) status.
This is also available in the GUI Features page.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.33 |
wsSystemLoadLoad indicator, 100 meant overload.ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.1.34 |
wsWanSendRateThe average WAN side send rate in the last minute.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.1.35 |
wsWanReceiveRateThe average WAN side receive rate in the last minute.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.1.36 |
wsLanSendRateThe average LAN side send rate in the last minute.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.1.37 |
wsLanReceiveRateThe average LAN side receive rate in the last minute.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.1.38 |
wsNonAcceleratedRateThe average non-accelerated traffic rate in the last minute.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.1.39 |
wsModelNumberAppliance model number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.1.40 |
wsWccpStatusWCCP status.
This is also available in the GUI Features page.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.1.41 |
wsStatusMIBTables OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.1.2 |
wsActiveAlarmTableA list of the active alarm entries. This represents the fault
conditions that are still active in the unit. SEQUENCE OF ActiveAlarmEntry .1.3.6.1.4.1.3845.30.4.1.1.2.1 |
activeAlarmEntryThe active alarm entries that are still valid system faults.
RFC2578 (SMIv2) requires this to be not-accessible. ActiveAlarmEntry .1.3.6.1.4.1.3845.30.4.1.1.2.1.1 |
wsActiveAlarmIndexAn index that uniquely identifies an entry in the
active alarm table.ro Integer32 .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.1 |
wsActiveAlarmSeqNumThe active alarm's sequence number at the time it was
generated.ro AppAccelerationSeqNum (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.2 |
wsActiveAlarmIDThe OID identifying the actual trap that was generated.ro OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.3 |
wsActiveAlarmSeverityThe alarm severity for the active alarm.ro AppAccelerationAlarmSeverity (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.4 |
wsActiveAlarmLogTimeThe value of sysUpTime when the alarm was generated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.5 |
wsActiveAlarmDescA description for the active alarm.ro AppAccelerationDescription (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.6 |
wsActiveAlarmAckedIdentifies if the user has acknowledged the alarm.rw AppAccelerationYesNo (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.7 |
wsActiveAlarmServiceAffectIdentifies if the alarm is service affecting.ro AppAccelerationYesNo (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.1.1.8 |
wsServiceClassStatsTableA list of service class statistics entries. This contains the
performance statistics separated by service classes. SEQUENCE OF WsServiceClassStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.2 |
wsServiceClassStatsEntryEach service class entry contains the performance statistics for
one service class. WsServiceClassStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.2.1 |
wsServiceClassIndexThis is used as an index that uniquely identifies a service class
in the service class statistics table.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.1 |
wsServiceClassNameName of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc.
The list of service classes monitored is defined in the
GUI Configure Settings: Service Class page.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.2 |
wsScsCurrentAcceleratedConnectionsCurrent number of accelerated connections for the
service class. This is also available in the
GUI Service Class Statistics Detail page. This
counter is reset only on system restart.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.3 |
wsScsTotalAcceleratedConnectionsTotal number of accelerated connections for the
service class. This is also available in the
GUI Service Class Statistics Detail page. This
counter is reset only on system restart.ro Counter64 .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.4 |
wsScsTotalAcceleratedOctetsTotal number of accelerated octets for the service class.
This is also available in the GUI Service Class Statistics
Detail page. This counter is reset only on system restart.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.5 |
wsScsTotalNonAcceleratedConnectionsTotal number of non-accelerated connections for the
service class. This is also available in the
GUI Service Class Statistics Detail page. This
counter is reset only on system restart.ro Counter64 .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.6 |
wsScsTotalNonAcceleratedOctetsTotal number of non-accelerated octets for the service class.
This is also available in the GUI Service Class Statistics
Detail page. This counter is reset only on system restart.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.7 |
wsScsTotalPreCompressionOctetsTotal number of accelerated octets for the service class before compression.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.8 |
wsScsCompressSentOctetsNumber of accelerated octets sent for the service class after compression.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.9 |
wsScsCompressReceivedOctetsNumber of accelerated octets received for the service class after compression.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.10 |
wsScsPreCompressSentOctetsNumber of accelerated octets sent for the service class before compression.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.11 |
wsScsPreCompressReceivedOctetsNumber of accelerated octets received for the service class before compression.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.12 |
wsScsSendBWSavingsWAN-side send bandwidth savings. 100% meant very high (above 99.5:1) compression.
0% meant no compression savings. The formula is
(Pre-compress-send-bytes - Compressed-send-bytes) / Pre-compress-send-bytes * 100%ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.13 |
wsScsRecvBWSavingsWAN-side receive bandwidth savings. 100% meant very high (above 99.5:1) compression.
0% meant no compression savings. The formula is
(Pre-compress-received-bytes - Compressed-received-bytes) / Pre-compress-received-bytes * 100%ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.14 |
wsScsSendRecvBWSavingsCombined send and receive bandwidth savings. The formula is
(Pre-compress-bytes - Compressed-bytes) / Pre-compress-bytes * 100%ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.15 |
wsScsSendCompressionRatioWAN-side send compression ratio per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.16 |
wsScsRecvCompressionRatioWAN-side receive compression ratio per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.17 |
wsScsSendRecvCompressionRatioCombined send and receive compression ratio per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.2.1.18 |
wsQosTrafficClassStatsTableA list of QoS traffic class statistics.deprecated SEQUENCE OF WsQosTcStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.3 |
wsQosTcStatsEntryEach entry contains performance statistics for one QoS traffic class.deprecated WsQosTcStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.3.1 |
wsQosIndexThis index uniquely identifies a QoS traffic class
in the QoS traffic class statistics table.rodeprecated INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.3.1.1 |
wsQosNameName of the QoS traffic class, which is defined in the
GUI Configure Settings: QoS page.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.3.1.2 |
wsQosConfiguredSendRatioThe minimum share of the bandwidth configured for this
traffic class. This is also available in the
GUI QoS Statistics page.rodeprecated INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.3.1.3 |
wsQosSentVolumeThe total volume of QoS traffic sent for this queue,
measured in 1000-octets. This counter may be reset from the
GUI QoS Statistics page. The wsQosStatsCollectionTime
variable indicates when the counter was reset.rodeprecated Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.3.1.4 |
wsQosActualSendRatioThe bandwidth used by this traffic class. This is calculated
using the wsQosSentVolume for the traffic class divided by
the sum of wsQosSentVolume of all traffic classes.rodeprecated INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.3.1.5 |
wsIcaStatsTableA list of ICA Traffic Presentation Layer statistics. SEQUENCE OF WsIcaStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.4 |
wsIcaStatsEntryEach entry contains the performance statistics for one ICA priority. WsIcaStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.4.1 |
wsIcaIndexThis is used as an index that uniquely identifies an ICA service
in the ICA Traffic Presentation Layer statistics table.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.1 |
wsIcaServiceNameName of the ICA service, which is also in the GUI QoS Statistics
page, Citrix ICA Traffic Presentation Layer Statistics section.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.2 |
wsIcaPriorityThe ICA Priorities: high is for realtime traffic,
medium is for interactive traffic, low is for bulk transfer traffic,
background is for the lowest priority traffic.
This is no longer applicable starting from release 6.0.rodeprecated Enumeration .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.3 |
wsIcaSentVolumeThe total volume of traffic sent for this ICA applications
measured in 1000-octets. This counter may be reset from the
GUI QoS Statistics page.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.4 |
wsIcaSentRatioThe sent volume as a percent share of the different ICA applications.ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.5 |
wsIcaReceivedVolumeThe total volume of traffic received for this ICA application,
measured in 1000-octets. This counter may be reset from the
GUI QoS Statistics page.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.6 |
wsIcaReceivedRatioThe received volume as a percent share of the different priority of the
service. This counter may be reset from the GUI QoS Statistics page.ro INTEGER UNITS "%" .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.7 |
wsIcaSendRateThe last minute send rate of this ICA application.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.8 |
wsIcaReceiveRateThe last minute receive rate of this ICA application.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.2.4.1.9 |
wsAdapterTableA list of adapters configured for the unit. It is also in the GUI IP Address page. SEQUENCE OF WsAdapterEntry .1.3.6.1.4.1.3845.30.4.1.1.2.5 |
wsAdapterEntryEach entry contains performance statistics for one ADAPTER. WsAdapterEntry .1.3.6.1.4.1.3845.30.4.1.1.2.5.1 |
wsAdapterIndexThis is used as an index that uniquely identifies an adapter.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.1 |
wsAdapterNameAdapter name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.2 |
wsAdapterEnabledAdapter state.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.3 |
wsAdapterIpAdapter IP address.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.4 |
wsAdapterNetmaskAdapter network mask.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.5 |
wsAdapterGatewayAdapter gateway.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.6 |
wsAdapterVirtualIpHA virtual IP address.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.7 |
wsAdapterVLanEnabledVLAN state.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.8 |
wsAdapterVLanGroupVLAN group ID.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.5.1.9 |
wsLinkStatsTableA list of link statistics. SEQUENCE OF LinkStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.6 |
linkStatsEntryEach entry contains the performance statistics for
one link. LinkStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.6.1 |
linkIndexThis index uniquely identifies a link in the
link statistics table.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.1 |
linkNameName of the link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.2 |
linkSentVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.3 |
linkReceivedVolumeThe total volume of traffic received on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.4 |
linkSentPacketsThe total number of packets sent on the link.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.5 |
linkReceivedPacketsThe total number of packets received on the link.
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.6 |
linkDroppedSentVolumeThe total traffic not sent on the link due to QoS threshold,
measured in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.7 |
linkDroppedReceivedVolumeThe total received traffic dropped from the link due to QoS threshold,
measured in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.8 |
linkDroppedSentPacketsThe total number of packets not sent on the link due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.9 |
linkDroppedReceivedPacketsThe total number of received packets dropped from the link
due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.6.1.10 |
wsAppStatsTableA list of link statistics. SEQUENCE OF AppStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.7 |
appStatsEntryEach entry contains the performance statistics for
one application on one link. AppStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.7.1 |
appIndexThis index uniquely identifies one application on a link.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.1 |
appNameName of the link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.2 |
appIdUnique ID for application.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.3 |
appParentIdParent application ID.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.4 |
appGroupIdBit mask, indicating the group which this application belong to.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.5 |
appSentVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.6 |
appReceivedVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.7 |
appSentPacketsThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.8 |
appReceivedPacketsThe total volume of traffic sent on the link,
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.9 |
appDroppedSentVolumeThe total traffic not sent on the link due to QoS threshold,
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.10 |
appDroppedReceiveVolumeThe total received traffic dropped from the link due to QoS threshold,
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.11 |
appDroppedSentPacketsThe total number of packets not sent on the link due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.12 |
appDroppedReceivedPacketsThe total number of received packets dropped from the link
due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.13 |
appSendRateThe last minute send rate of this application.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.14 |
appReceiveRateThe last minute receive rate of this application.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.2.7.1.15 |
wsQosStatsTableA list of QoS traffic class statistics. SEQUENCE OF QosStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.8 |
qosStatsEntryEach entry contains the performance statistics for
one QoS traffic class. QosStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.8.1 |
qosIndexThis index uniquely identifies a QoS traffic class
in the QoS traffic class statistics table.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.1 |
qosPolicyNameName of the QoS Policy.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.2 |
qosLinkName of the link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.3 |
qosSentVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.4 |
qosReceiveVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.5 |
qosSentPacketsThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.6 |
qosReceivedPacketsThe total volume of traffic sent on the link,
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.7 |
qosDroppedSentVolumeThe total traffic not sent on the link due to QoS threshold,
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.8 |
qosDroppedReceiveVolumeThe total received traffic dropped from the link due to QoS threshold,
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.9 |
qosDroppedSentPacketsThe total number of packets not sent on the link due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.10 |
qosDroppedReceivedPacketsThe total number of received packets dropped from the link
due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.8.1.11 |
wsLscStatsTableA list of link level service class statistics. SEQUENCE OF LscStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.9 |
lscStatsEntryEach entry contains the performance statistics for
one link level service class. LscStatsEntry .1.3.6.1.4.1.3845.30.4.1.1.2.9.1 |
lscIndexThis index is used to identify the link statistics
within a service class.ro INTEGER(1 .. 2147483647) .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.1 |
lscServiceClassNameName of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc.
The list of service classes monitored is defined in the
GUI Configure Settings: Service Class page.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.2 |
lscLinkName of the link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.3 |
lscSentVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.4 |
lscReceivedVolumeThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.5 |
lscSentPacketsThe total volume of traffic sent on the link, measured
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.6 |
lscReceivedPacketsThe total volume of traffic sent on the link,
in 1000-octets.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.7 |
lscDroppedSentVolumeThe total traffic not sent on the link due to QoS threshold,
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.8 |
lscDroppedReceiveVolumeThe total received traffic dropped from the link due to QoS threshold,
in 1000-octets.ro Counter64 UNITS "K-octets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.9 |
lscDroppedSentPacketsThe total number of packets not sent on the link due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.10 |
lscDroppedReceivedPacketsThe total number of received packets dropped from the link
due to QoS threshold.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.3845.30.4.1.1.2.9.1.11 |
wsPartnerTableA list of CloudBridge partners SEQUENCE OF PartnerEntry .1.3.6.1.4.1.3845.30.4.1.1.2.10 |
partnerEntryEach row contains information on one partner unit. PartnerEntry .1.3.6.1.4.1.3845.30.4.1.1.2.10.1 |
partnerAddrTypeFormat of partnerAddr, IPv4 or IPv6.
See RFC4001 for InetAddressType and InetAddress usage.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.3845.30.4.1.1.2.10.1.1 |
partnerAddrPartner IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.3845.30.4.1.1.2.10.1.2 |
partnerConnectionsNumber of accelerated connections to partner.ro INTEGER .1.3.6.1.4.1.3845.30.4.1.1.2.10.1.3 |
partnerSendRateThe last minute send rate to partner.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.2.10.1.4 |
partnerReceiveRateThe last minute receive rate from partner.ro INTEGER UNITS "bps" .1.3.6.1.4.1.3845.30.4.1.1.2.10.1.5 |
partnerIdleTimeTime where no traffic flows between this partner.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3845.30.4.1.1.2.10.1.6 |
wsHAMasterIpAddrThe master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.3 |
wsStatusMIBAlertTables OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.1.4 |
wsAlertActionAction of the alert.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.4.1 |
wsAlertClassClass of the alert.ro Enumeration .1.3.6.1.4.1.3845.30.4.1.1.4.2 |
wsAlertMsgMessage of the alert.ro AppAccelerationDescription (APPACCELERATION-TC) .1.3.6.1.4.1.3845.30.4.1.1.4.3 |
wsSourceIpAddrThe IP address of the source of Alert.ro IpAddress .1.3.6.1.4.1.3845.30.4.1.1.5 |
wsStatusMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.2 |
wsStatusMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.2.1 |
wsStatusMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.4.1.2.2 |
wsStatusMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3845.30.5.1 |
wsNotifyStartAn indication that the agent has started running. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.1 |
wsNotifyShutdownAn indication that the agent is in the process of being shutdown. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.2 |
wsNotifyRestartAn indication that the agent has been restarted. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.3 |
wsHANotifyNewMasterThe newMaster trap indicates that the sending agent
has transitioned to 'Master' state. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.4 |
wsNotifyAvailBWChangeAnd indication that available BW Has Changed NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.5 |
wsNotifyUnexpectedRestartAn indication that the agent has been unexpectedly restarted. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.6 |
wsNotifyPersistentErrorThe unit is experiencing a persistent internal error. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.7 |
wsNotifyAlertAn alert is generated from the unit. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.8 |
wsNotifyConfigurationChangedAn indication that the configuration has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.3845.30.5.1.9 |