ALCATEL-IND1-TIMETRA-PORT-MIB
AI MIB Summary
The ALCATEL-IND1-TIMETRA-PORT-MIB provides SNMP-based management and provisioning capabilities specifically for the physical port interfaces and hardware components of Alcatel-Lucent 7x50 series devices. It enables the monitoring of port operational states, configuration parameters, and interface statistics to facilitate network administration and troubleshooting on Timetra platforms.
This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
tmnxPortMIBModule.1.3.6.1.4.1.6527.1.1.3.25
693
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
693 total| Object Name |
|---|
tmnxPortMIBModuleThis document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.25 |
tmnxPortConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2 |
tmnxPortCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2.1 |
tmnxPortComp7750 OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2.1.3 |
tmnxPortComp7750V4v0The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems. tmnxMlImaBundleGroup was added as of R4.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.3.2 |
tmnxPortComp7750V5v0The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.3.3 |
tmnxPortComp7750V6v0The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.3.4 |
tmnxPortComp7450 OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2.1.4 |
tmnxPortComp7450V4v0The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.4.2 |
tmnxPortComp7450V5v0The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.4.3 |
tmnxPortComp7450V6v0The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.4.4 |
tmnxPortComp7710 OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2.1.5 |
tmnxPortComp7710V3v0The compliance statement for revision 3.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.5.1 |
tmnxPortComp7710V5v0The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.5.2 |
tmnxPortComp7710V6v0The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.1.5.3 |
tmnxPortGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2.2 |
tmnxPortFRGroupThe group of objects supporting management of Frame Relay DLCMI on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.5 |
tmnxQosAppObjsGroupThe group of objects supporting management of Qos associations of the buffer pools to mdas, ports, channels and bundles on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.6 |
tmnxPortTestGroupThe group of objects supporting management of port testing on Alcatel 7x50 SR series system. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.7 |
tmnxPortObsoleteGroupThe group of objects in ALCATEL-IND1-TIMETRA-PORT-MIB which are obsoleted. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.11 |
tmnxPortIngrMdaQosStatR2r1GroupThe group of objects that describe the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA for revision 2.1 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.14 |
tmnxPortStatsR2r1GroupThe group of objects supporting port statistics for revision 2.1 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.16 |
tmnxPortNotificationGroupR2r1The group of notifications supporting the management of physical ports for revision 2.1 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.17 |
tmnxPortNotifyObjsGroupR2r1The group of objects supporting physical port notifications for revision 2.1 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.18 |
tmnxPortNotifyObsoleteGroupThe group of notifications supporting the management of physical ports made obsolete for revision 2.1 on Alcatel 7x50 SR series systems. tmnxEqPortSFPCorrupted was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.20 |
tmnxPortSonetV3v0GroupThe group of objects supporting management of SONET type ports for revision 3.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.21 |
tmnxPortTDMV3v0GroupThe group of objects supporting management of TDM type ports for revision 3.0 on the Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.22 |
tmnxPortATMV3v0GroupThe group of objects supporting management of ATM interfaces for version 3.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.23 |
tmnxScalarPortV3v0GroupThe group of objects supporting management for general port settings for revision 3.0 on Alcatel 7x50 series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.24 |
tmnxPortV3v0GroupThe group of objects supporting management of physical port capabilities for revision 3.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.25 |
tmnxCiscoHDLCGroupThe group of objects supporting Cisco HDLC encapsulation on Alcatel 7750 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.26 |
tmnxMlBundleV3v0GroupThe group of objects supporting management MLBUNDLES for revision 3.0 on the Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.27 |
tmnxObsoleteGroupV3v0The group of objects obsoleted in the 7x50 SR series 3.0 release Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.28 |
tmnxPortEthernetV3v0GroupThe group of objects supporting management of Ethernet ports for revision 3.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.29 |
tmnxPortTDMGroupV4v0The group of objects supporting management of TDM type ports for version 4.0 on the Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.30 |
tmnxPortATMGroupV4v0The group of objects supporting management of ATM interfaces for version 4.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.31 |
tmnxMlBundleGroupV4v0The group of objects supporting management MLBUNDLES for revision 4.0 on the Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.32 |
tmnxMlImaBundleGroupThe group of objects supporting management of Ima Groups and Members on the Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.33 |
tmnx7710PortTDMGroupV3v0The group of objects supporting management of TDM type ports specific to the Alcatel 7710 SR series systems for revision 3.0.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.34 |
tmnxPortGroupV4v0The group of objects supporting management of physical port capabilities for revision 4.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.35 |
tmnxObsoleteGroupV5v0The group of objects obsoleted in the 7x50 SR series 5.0 release Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.36 |
tmnxPortSchedV5v0GroupThe group of objects supporting management of physical port virtual scheduler capabilities for revision 5.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.37 |
tmnxPortEthernetV5v0GroupThe group of objects supporting management of Ethernet ports for revision 5.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.38 |
tmnxPortGroupV5v0The group of objects supporting management of physical port capabilities for revision 5.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.39 |
tmnxMlBundleGroupV5v0The group of objects supporting management MLBUNDLES for revision 5.0 on the Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.40 |
tmnxPortNotificationGroupV5v0The group of notifications supporting the management of physical ports for revision 5.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.41 |
tmnxPortTDMGroupV5v0The group of objects supporting management of TDM type ports for version 5.0 on the Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.42 |
tmnx7710PortTDMGroupV5v0The group of objects supporting management of TDM type ports specific to the revision 5.0 on Alcatel 7710 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.43 |
tmnxPortCemGroupV6v0The group of objects supporting management of CEM encapsulation TDM type ports specific to the Alcatel 7750 and 7710 SR series systems for revision 6.0. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.44 |
tmnxMcMlpppBundleGroupThe group of objects supporting management of MClass MLPPP BUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.45 |
tmnxPortNotificationGroupV6v0The group of notifications supporting the management of physical ports for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.46 |
tmnxPortEthernetV6v0GroupThe group of objects supporting management of Ethernet ports for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.47 |
tmnxMlBundleGroupV6v0The group of objects supporting management MLBUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.48 |
tmnxMlpppBundleGroupThe group of objects supporting management of MLPPP Bundles on the Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.49 |
tmnxPortNotificationGroupV3v0The group of notifications supporting the management of physical ports for revision 3.0 on Alcatel 7x50 SR series systems.obsolete Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.50 |
tmnxPortTDMGroupV6v0The group of objects supporting management of TDM type ports for version 6.0 on the Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.52 |
tmnxDigitalDiagMonitorGroupThe group of objects supporting the management of Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.53 |
tmnxPortGroupV6v0The group of objects supporting management of physical port capabilities for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.54 |
tmnxNamedPoolGroupV6v0The group of objects supporting the Named Pool feature for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.55 |
tmnxPortNotifyObjsGroupV6v0The group of objects supporting physical port notifications for revision 6.0 on Alcatel 7x50 SR series systems. Unknown .1.3.6.1.4.1.6527.3.1.1.2.2.2.57 |
tmnxPortObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.4 |
tmnxPortTableLastChangeThe value of sysUpTime when the tmnxPortTable was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.1 |
tmnxPortTableThe port table has an entry for each port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxPortEntry .1.3.6.1.4.1.6527.3.1.2.2.4.2 |
tmnxPortEntryEach row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal. TmnxPortEntry .1.3.6.1.4.1.6527.3.1.2.2.4.2.1 |
tmnxPortPortIDtmnxPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1 |
tmnxPortLastChangeTimeThe tmnxPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxPortEntry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2 |
tmnxPortTypeThe type of port or optical pack installed.ro TmnxPortType .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3 |
tmnxPortClassThe class of port or optical pack installed. This can be derived from tmnxPortType.ro TmnxPortClass .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4 |
tmnxPortDescriptionA textual string containing user supplied information about the interface.rw TItemLongDescription (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5 |
tmnxPortNameThe textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6 |
tmnxPortAliasThis object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPortAlias associated with that interface is the zero-length string. As and when a value is written into an instance of tmnxPortAlias through a network management set operation, then the agent must retain the supplied value in the tmnxPortAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7 |
tmnxPortUserAssignedMacWhen tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the system assigned MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8 |
tmnxPortMacAddressWhen tmnxPortUserAssignedMac has a value of 'true', tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress returns the same value as tmnxPortMacAddress, the hardware or system assigned MAC address. When tmnxPortMacAddress is modified by a SET request, the agent sets tmnxPortUserAssignedMac to 'true'. Setting tmnxPortMacAddress to all zeros causes the agent to revert to using the default tmnxPortHwMacAddress and also to return tmnxPortUserAssignedMac as 'false'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9 |
tmnxPortHwMacAddressThe interface's hardware or system assigned MAC address at its protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. In the case of a pre-provisioned port that is not yet physically in the system, the MAC address may not be known. In this case a MAC address of all zeros is returned.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10 |
tmnxPortModeThe tmnxPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM MDA family, then tmnxPortEncapType is automatically set to 'atmEncap'. If port mode equals 'access', tmnxPortEncapType must also be configured to 'qEncap' (For Ethernet MDAs) or to 'bcpNullEncap' for Sonet/SDH MDAs. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. If the port mode equals 'network', tmnxPortEncapType must also be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap' (Sonet/SDH MDAs) and tmnxPortEncapType is defaulted to those values on the mode change.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11 |
tmnxPortEncapTypeThe type of encapsulation protocol configured on this port's network interface. If tmnxPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be configured on this port. Sometimes this is referred to as raw Ethernet packets. If tmnxPortEncapType has a value of 'qEncap', ingress frames carry 802.1q tags where each different tag can signify a different service. This is not a valid value if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpNullEncap', Bcp is used on the sonet path as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed into the sonet path. Only a single SAP can be associated with the sonet path. 'bcpNullEncap' is valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpDot1qEncap', BCP is used as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed on the sonet path. This encapsulation type is required when multiple SAPs are defined on the sonet path where each one is service delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap' is specified, BCP does not enter the 'open' state unless the far end peer also supports 'bcpDot1qEncap'. This allows a LCP negotiation to transmit configuration request and confirmation messages to enable this feature. 'bcpDot1qEncap' is a valid value only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'ipcpEncap', BCP will not be used on this sonet path. IPCP NCP is used instead. 'ipcpEncap' is a valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'frEncap', Frame Relay is the expected encapsulation. If tmnxPortEncapType has a value of 'pppAutoEncap', IPCP is automatically enabled. This encap type is only valid on ports/paths in network mode. If tmnxPortEncapType has a value of 'atmEncap', the encapsulation on the port is ATM. The 'atmEncap' is also used when mirroring ATM ports. If tmnxPortEncapType has a value of 'wanMirrorEncap', the port is used for mirroring of frame-relay and POS ports. On such ports no link management protocol would run. If tmnxPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC encapsulation is applied. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet'. If tmnxPortEncapType has a value of 'cemEncap', encapsulation of frames will be circuit emulation. This is used to support transparent transmission of frames. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode. tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12 |
tmnxPortLagIdThe value of tmnxPortLagId indicates which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this object is '64', when the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13 |
tmnxPortHoldTimeUpThe value of tmnxPortHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. The value of tmnxPortHoldTimeUp is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeUp is used instead.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14 |
tmnxPortHoldTimeDownThe value of tmnxPortHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately. The value of tmnxPortHoldTimeDown is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeDown is used instead.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15 |
tmnxPortUpProtocolsThe tmnxPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.ro Bits .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16 |
tmnxPortConnectorTypeThe type of connector installed on this port.ro TmnxPortConnectorType .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17 |
tmnxPortTransceiverTypeType of the transceiver.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25 |
tmnxPortTransceiverCodeThe code for the transmission media. tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard.roobsolete Bits .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26 |
tmnxPortTransceiverLaserWaveLenThe light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27 |
tmnxPortTransceiverDiagCapableIndicates if the transceiver is capable of doing diagnostics.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28 |
tmnxPortTransceiverModelNumberModel number of the transceiver.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29 |
tmnxPortSFPConnectorCodeThe external connector provided on the interface.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30 |
tmnxPortSFPVendorOUIThe vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31 |
tmnxPortSFPVendorManufactureDateThe vendor's date code.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32 |
tmnxPortSFPMediaThe media supported for the SFP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33 |
tmnxPortSFPEquippedIndicates if the SFP is equipped.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34 |
tmnxPortEquippedIndicates if there is an optics pack installed in this port or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35 |
tmnxPortLinkStatusIndicates whether or not the port has a physical link.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36 |
tmnxPortAdminStatusThe desired administrative status of this port.rw TmnxPortAdminStatus (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37 |
tmnxPortOperStatusThe current operational status of this port.ro TmnxPortOperStatus .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38 |
tmnxPortStateThe state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tmnxPortUpProtocols variable indicates the actual type(s) of traffic can be passed on this 'up' link.ro TmnxPortState .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39 |
tmnxPortPrevStateThe tmnxPortPrevState indicates the state level that the port transitioned from into the current tmnxPortState level.ro TmnxPortState .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40 |
tmnxPortNumAlarmsThe number of alarms currently outstanding on this port.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41 |
tmnxPortAlarmStateThe value of tmnxPortAlarmState indicates the current alarm state for this port.ro TmnxAlarmState (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42 |
tmnxPortLastAlarmEventThe value of tmnxPortLastAlarmEvent is an object identifier whose object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this port. If the tmnxPortAlarmState has a value of 'alarmCleared', the most recent alarm event will be in the nlmAlarmClearedTable. If it has a value of 'alarmActive', the entry pointed to is in the nlmAlarmActiveTable. If the value of tmnxPortLastAlarmEvent is '0.0', then either there have not been any alarm events associated with this chassis since the system was last booted, or the last alarm event has aged out and its entry is no longer available in the ALARM-MIB tables.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43 |
tmnxPortClearAlarmsSetting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be removed from the MIB before product release.rw TmnxActionType (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44 |
tmnxPortSFPVendorSerialNumtmnxPortSFPVendorSerialNum contains ASCII characters, defining the vendor serial number. A value of all zero indicates that the vendor SN is unspecified.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45 |
tmnxPortSFPVendorPartNumThe vendor part number contains ASCII characters, defining the vendor part number or product name. A value of all zero indicates that the vendor PN is unspecified.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46 |
tmnxPortLastStateChangedThe tmnxPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48 |
tmnxPortNumChannelsFor SONET/SDH paths or TDM channels, tmnxPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPortNumChannels contains the total number of channels on the physical port. For all other entries in the tmnxPortTable, the value of this object will be zero.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49 |
tmnxPortNetworkEgrQueuestmnxPortNetworkEgrQueues contains the network egress queue policy if the tmnxPortMode is network. Otherwise this object has no significance.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50 |
tmnxPortBundleNumbertmnxPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51 |
tmnxPortIsLeaftmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing traffic. The value of this object is 'false' for: 1. Physical ports on SONET/TDM MDA's 2. Intermediate channels on a channelized MDA 3. Leaf channels which belong to a bundle For ports on Ethernet MDA's or for LAG ports, the value of this object will be 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52 |
tmnxPortChanTypetmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of this object will be 'unknown'.ro TmnxMDAChanType (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53 |
tmnxPortParentPortIDtmnxPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54 |
tmnxPortOpticalCompliancetmnxPortOpticalCompliance is applicable only when the tmnxPortSFPEquipped is set to 'true'. The value of tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55 |
tmnxPortLoadBalanceAlgorithmThe value of tmnxPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', they are not included. When the value is 'default', the port inherits the global settings in tmnxL4LoadBalancing. The value is 'notApplicable' for ports that do not pass any traffic. An attempt to modify this object when it is set to 'notApplicable' will return an inconsistentValue error.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56 |
tmnxPortEgrPortSchedPlcyThe value of tmnxPortEgrPortSchedPlcy specifies the egress QoS port-scheduler policy for this port. This object must correspond to the index of a row in ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57 |
tmnxPortLastClearedTimeThe value of tmnxPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58 |
tmnxPortIngNamedPoolPlcyThe value of tmnxPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60 |
tmnxPortEgrNamedPoolPlcyThe value of tmnxPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61 |
tmnxPortIngPoolPercentRateThe value of tmnxPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62 |
tmnxPortEgrPoolPercentRateThe value of tmnxPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63 |
tmnxPortDDMEventSuppressionThe value of tmnxPortDDMEventSuppression specifies whether or not an inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64 |
tmnxPortSFPStatusThe value of tmnxPortSFPStatus indicates the operational status of the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detected. A failure to read the SFP data will result in a 'read-error (2)', while corrupted information on the SFP will result in either 'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in invalid data or DDM information respectively. An insertion of an unsupported SFP will result in 'unsupported (5)'. A trap will be raised if the value of tmnxPortSFPStatus indicates a failure; that is the tmnxPortSFPStatus is neither 'not-equipped (0)', nor 'operational (1)'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65 |
tmnxPortTestTableThe tmnxPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxPortTestEntry .1.3.6.1.4.1.6527.3.1.2.2.4.3 |
tmnxPortTestEntryEach row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. TmnxPortTestEntry .1.3.6.1.4.1.6527.3.1.2.2.4.3.1 |
tmnxPortTestStateThe current testing status of this port.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1 |
tmnxPortTestModeThe type of test to be executed on this port.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2 |
tmnxPortTestParameterA parameter to be passed to the test program.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3 |
tmnxPortTestLastResultThe status of the last test executed on this port.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4 |
tmnxPortTestStartTimeThe date and time the test started on this port. Returns 0 if tmnxPortTestState is notInTest.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5 |
tmnxPortTestEndTimeThe date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6 |
tmnxPortTestDurationThe number of seconds the port test is anticipated to last.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7 |
tmnxPortTestActionThe operator sets this variable to perform the appropriate type of testing.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8 |
tmnxPortEtherTableThe tmnxPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxPortEtherEntry .1.3.6.1.4.1.6527.3.1.2.2.4.4 |
tmnxPortEtherEntryEach row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM card entry can be deleted from the tmnxMDATable, its supported tmnxPortEntry and tmnxPortEtherEntry rows must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType. TmnxPortEtherEntry .1.3.6.1.4.1.6527.3.1.2.2.4.4.1 |
tmnxPortEtherMTUThe size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. Setting tmnxPortEtherMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1514 with mode access and encap-type null 1518 with mode access and encap-type dot1q 1518 with mode access and encap-type mpls 9198 with mode networkrw Unsigned32 (0|512..9212) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1 |
tmnxPortEtherDuplexThe tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherDuplex variable is ignored. A value of 'fullDuplex' sets the link to full duplex mode. A value of 'halfDuplex' sets the link to half duplex mode. tmnxPortEtherDuplex is only valid on Ethernet interfaces that support multiple duplex modes.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2 |
tmnxPortEtherSpeedThe tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherSpeed variable is ignored. A value of 'speed10' sets the link to 10 mbps. A value of 'speed100' sets the link to 100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps). tmnxPortEtherSpeed is only valid on Ethernet interfaces that support multiple link speeds.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3 |
tmnxPortEtherAutoNegotiateWhen the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes supported by the interface. When the value of tmnxPortEtherAutoNegotiate is 'limited', the Ethernet interface will automatically negotiate link parameters with the far end, but will only advertise the speed and duplex mode specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex. If tmnxPortEtherAutoNegotiate is 'false', the Ethernet interface won't negotiate link parameters with the far end and will instead force the speed and duplex mode to the values specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex respectively.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4 |
tmnxPortEtherOperDuplexThe tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the link is in half duplex mode. tmnxPortEtherOperDuplex is only valid if tmnxPortClass is 'faste' or 'xcme'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5 |
tmnxPortEtherOperSpeedThe tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link parameters with the far end side. The value of tmnxPortEtherOperSpeed is only valid if tmnxPortClass is one of the Ethernet classes.ro Unsigned32 UNITS "mega-bits per second" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6 |
tmnxPortEtherAcctPolicyIdThe value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this portrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7 |
tmnxPortEtherCollectStatsEnable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8 |
tmnxPortEtherMDIMDIXThe tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethernet interface the value 'unknown (0)' is indicated. tmnxPortEtherMDIMDIX is only valid if tmnxPortClass is 'faste' or 'xcme'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9 |
tmnxPortEtherXGigModeThe tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10 |
tmnxPortEtherEgressRateThe tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.rw Integer32 (-1 | 1..10000000) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11 |
tmnxPortEtherDot1qEtypeThe tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap.rw Unsigned32 ('600'H..'ffff'H) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12 |
tmnxPortEtherQinqEtypeThe tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap.rw Unsigned32 ('600'H..'ffff'H) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13 |
tmnxPortEtherIngressRateThe tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.rw Integer32 (-1 | 1..10000) UNITS "mega-bits per second" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14 |
tmnxPortEtherReportAlarmThe value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear.rw TmnxPortEtherReportStatus .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15 |
tmnxPortEtherReportAlarmStatusThe value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port.ro TmnxPortEtherReportStatus .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16 |
tmnxPortEtherPkts1519toMaxThe total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17 |
tmnxPortEtherHCOverPkts1519toMaxThe number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18 |
tmnxPortEtherHCPkts1519toMaxThe total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tmnxPortEtherHCOverPkts1519toMax.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19 |
tmnxPortEtherLacpTunnelThe value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them through instead. Also, the port cannot be added as a member to a LAG group, and vice versa.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20 |
tmnxPortEtherDownWhenLoopedEnabledThe value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherType of 0x9000. If the port receives a keep-alive that it transmitted, tmnxPortState will be set to 'linkUp' if it was previously 'up'. The port will not move back to tmnxPortState 'up' for a period of time defined by tmnxPortEtherDownWhenLoopedRetry, but will continue to periodically send out keep-alive PDUs. Every time the port receives a keep alive it sent while a loop has been detected, it will reset the time period that it will remain down as defined by tmnxPortEtherDownWhenLoopedRetry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21 |
tmnxPortEtherDownWhenLoopedKeepAliveThe tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22 |
tmnxPortEtherDownWhenLoopedRetryThe tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should not set tmnxPortState to 'up' until the user administratively disables and re-enables the port by setting tmnxPortAdminStatus to 'outOfService' and then to 'inService'.rw Unsigned32 (0|10..160) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23 |
tmnxPortEtherDownWhenLoopedStateThe value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24 |
tmnxPortEtherPBBEtypeThe tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames.rw Unsigned32 ('600'H..'ffff'H) .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25 |
tmnxPortEtherReasonDownFlagsThe tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has the object 'sapEthernetLLFOperStatus' set to 'fault'ro Bits .1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26 |
tmnxSonetTableThe tmnxSonetTable has an entry for each packet over Sonet port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxSonetEntry .1.3.6.1.4.1.6527.3.1.2.2.4.5 |
tmnxSonetEntryEach row entry represents a packet over Sonet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal. The tmnxSonetEntry contains attributes that are unique to the 'sonet' TmnxPortType. It also contains attributes that are common to all sonet paths configured on a sonet port. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. All entries in this table have the sonet path number part of their tmnxPortPortID index value set to zero. TmnxSonetEntry .1.3.6.1.4.1.6527.3.1.2.2.4.5.1 |
tmnxSonetSpeedThe rate of this optical facility.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1 |
tmnxSonetClockSourcetmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed').rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2 |
tmnxSonetFramingThe value of tmnxSonetFraming indicates the type of framing used on this interface.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3 |
tmnxSonetReportAlarmThe value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational state of the port to be downed. Set by default. lais(2) Reports line alarm indication signal errors. Not set by default. lrdi(3) Reports line remote defect initiation errors. LRDIs are caused by remote LOF, LOC, and LOS. Set by default. ss1f(4) Reports section synchronization failure as reported by the S1 byte. Not set by default. sb1err(5) Reports section B1 errors. Not set by default. lb2erSd(6) Reports line signal degradation BER errors. Not set by default. lb2erSf(7) Reports line signal failure BER errors. Set by default. slof(8) Reports section loss of frame errors. Set by default slos(9) Reports section loss of signal errors. Set by default. stxptr(10) Reports a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. Not set by default. srxptr(11) Reports a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per path. Not set by default. lrei(12) Reports a line error condition raised by the remote as a result of B1 errors received from this node. Not set by default.rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4 |
tmnxSonetBerSdThresholdThe value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a BER SD failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5 |
tmnxSonetBerSfThresholdThe value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a BER SF failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6 |
tmnxSonetApsAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7 |
tmnxSonetApsAdminStatusAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.rwobsolete TmnxPortAdminStatus (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8 |
tmnxSonetApsOperStatusAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.roobsolete TmnxPortOperStatus .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9 |
tmnxSonetApsAuthKeyAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.rwobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10 |
tmnxSonetApsNeighborAddrAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11 |
tmnxSonetApsAdvertiseIntervalAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.rwobsolete TimeInterval UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12 |
tmnxSonetApsAdvertiseTimeLeftAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.roobsolete TimeInterval UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13 |
tmnxSonetApsHoldTimeAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.rwobsolete TimeInterval UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14 |
tmnxSonetApsHoldTimeLeftAutomatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.roobsolete TimeInterval UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15 |
tmnxSonetLoopbackActivate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16 |
tmnxSonetReportAlarmStatusThe bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.ro Bits .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17 |
tmnxSonetSectionTraceModeThe tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 byte is 0x01, and the z0 byte increments. If the mode is set to 'byte', then the j0 byte is the first octet of the tmnxSonetJ0String object and the z0 byte is 0xcc. If the mode is set to 'string', then the J0 byte is set to the 16 values in the tmnxSonetJ0String object and the z0 byte is 0xcc.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18 |
tmnxSonetJ0StringThe tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. If the mode is byte, then the first octet of this object is used for the J0 byte. If the mode is string, then the 16 bytes in this object are used for the J0 byte. If set to less than 16 bytes it, will be padded out to 16 with zeros. The default value is 0x01 and 15 NULLsrw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19 |
tmnxSonetMonS1ByteThe tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchronization`. Other values are documented in Tellcordia GR253 and ITU G.707ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20 |
tmnxSonetMonJ0StringThe tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21 |
tmnxSonetMonK1ByteThe tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22 |
tmnxSonetMonK2ByteThe tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23 |
tmnxSonetSingleFibertmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state routes or policy-based forwarding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24 |
tmnxSonetHoldTimeUpThe value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25 |
tmnxSonetHoldTimeDownThe value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26 |
tmnxSonetPathTableThe tmnxSonetPathTable has an entry for each sonet path configured in each packet over Sonet port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxSonetPathEntry .1.3.6.1.4.1.6527.3.1.2.2.4.6 |
tmnxSonetPathEntryEach row entry represents a configured sonet path in a packet over Sonet port on a IOM card in a chassis in the system. The tmnxSonetPathEntry contains attributes that are unique to a sonet path of a 'sonet' TmnxPortType. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations using tmnxSonetPathRowStatus. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable. TmnxSonetPathEntry .1.3.6.1.4.1.6527.3.1.2.2.4.6.1 |
tmnxSonetPathRowStatustmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable for this sonet path port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1 |
tmnxSonetPathLastChangeTimeThe tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2 |
tmnxSonetPathMTUThe size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxSonetPathMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 1506 with mode access and encap-type mplscp 1524 with mode access and encap-type atm 9208 with mode networkrw Unsigned32 (0|512..9208) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3 |
tmnxSonetPathScrambleIf the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is set to 'false', scrambling is disabled. The default value for non-ATM paths is 'false'. The default value for ATM paths is 'true' If the value of tmnxSonetPathC2Byte is set to the default for the currently configured tmnxSonetPathScramble, then changing the value of tmnxSonetPathScramble for non-ATM paths causes a change to tmnxSonetPathC2Byte to a default value for a new scrambling option. The default values are as follows: scrambled non-ATM sonet/sdh path - C2 Byte value is 0x16 unscrambled non-ATM sonet/sdh path - C2 Byte value is 0xCFrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4 |
tmnxSonetPathC2ByteThe tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled sonet. Setting C2 equal to 0xCF indicates unscrambled sonet. Setting C2 equal to 0x13 indicates ATM. For paths on an MDA that supports channelization, the default value is based on the value of tmnxMDAMaxChannelization. For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04. Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent to assign the default value to this object.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5 |
tmnxSonetPathJ1StringThe tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded with NULLs. For SONET framing, an additional CR (0x0D) / LF (0x0A) pair will be added by the driver. For SDH framing only 16 bytes are sent in the J1 bytes. The driver will set the MSB of the first byte, and put the first 15 bytes of the user configured string as the following bytes. The driver will set the CRC-7 of the 16 bytes into the other 7 bits of the first byte. The default value is `Alcatel 7x50 SR`. Setting a 1-byte long string containing 0xFF will restore the default. Setting the string 'zeros' will send all-zeros (ASCII NULL characters without CR/LF or CRC-7)in the J1 bytes.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6 |
tmnxSonetPathCRCThe value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For paths with encapsulation set to ATM the default and only supported value is crc32 and applies to AAL5 CRC calculations on that path.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7 |
tmnxSonetPathOperMTUThe negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8 |
tmnxSonetPathOperMRUThe negotiated size of the largest packet that can be received on the sonet path, specified in octets.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9 |
tmnxSonetPathReportAlarmThe value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors. Not set by default. plop(2) Reports path loss of pointer (per tributary) errors. Set by default. prdi(3) Reports path remote defect indication errors. Not set by default. pb3err(4) Reports path B3 errors. Not set by default. pplm(5) Reports a path payload mismatch. As a result the path will be operationally downed. Set by default. prei(6) Reports a path error condition raised by the remote as a result of B3 errors received from this node. Not set by default. puneq(7) Reports unequipped path errors. Set by default. plcd(8) Reports path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10 |
tmnxSonetPathAcctPolicyIdThe value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this portrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11 |
tmnxSonetPathCollectStatsEnable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12 |
tmnxSonetPathReportAlarmStatusThe bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) errors. prdi(3) Indicates path remote defect indication errors. pb3err(4) Indicates path B3 errors. pplm(5) Indicates a path payload mismatch. prei(6) Indicates a path error condition raised by the remote as a result of B3 errors received from this node. puneq(7) Indicates a far-end unequipped error. plcd(8) Indicates a path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.ro Bits .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13 |
tmnxSonetPathMonC2ByteThe tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14 |
tmnxSonetPathMonJ1StringThe tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15 |
tmnxSonetPathTypetmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 - Configures the port or channel as service access(e3) vtg - Configures the path as a virtual tributary group. tug-2 - Configures the path as a tributary unit group. tug-3 - Configures the port or channel for transport network use.rwobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16 |
tmnxSonetPathChildTypetmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child path types are sonetSts3, sdhTug3, pdhDs3, pdhE3, sonetVt15, sonetVt2, pdhDs1 and pdhE1.rw TmnxMDAChanType (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17 |
tmnxPortTypeTableThe Port type table has an entry for each Alcatel 7x50 SR series port model. SEQUENCE OF TmnxPortTypeEntry .1.3.6.1.4.1.6527.3.1.2.2.4.7 |
tmnxPortTypeEntryEach row entry represents an Alcatel 7x50 SR series port model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests. TmnxPortTypeEntry .1.3.6.1.4.1.6527.3.1.2.2.4.7.1 |
tmnxPortTypeIndexThe unique index value which identifies this type of Alcatel 7x50 SR series port model. TmnxPortType .1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1 |
tmnxPortTypeNameThe administrative name that identifies this type of Alcatel 7x50 SR series port model. This name string may be used in CLI commands to specify a particular Port model type.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2 |
tmnxPortTypeDescriptionA detailed description of this Alcatel 7x50 SR series port model.ro TItemDescription (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3 |
tmnxPortTypeStatusWhen tmnxPortTypeStatus has a value of 'true' it indicates that this port model is supported in this revision of the management software. When it has a value of 'false' there is no support.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4 |
tmnxPortConnectTypeTableThe Port Connector type table has an entry for each Alcatel 7x50 SR series port connector model. SEQUENCE OF TmnxPortConnectTypeEntry .1.3.6.1.4.1.6527.3.1.2.2.4.8 |
tmnxPortConnectTypeEntryEach row entry represents an Alcatel 7x50 SR series port Connector model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests. TmnxPortConnectTypeEntry .1.3.6.1.4.1.6527.3.1.2.2.4.8.1 |
tmnxPortConnectTypeIndexThe unique index value which identifies this type of Alcatel 7x50 SR series port connector model. TmnxPortConnectorType .1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1 |
tmnxPortConnectTypeNameThe administrative name that identifies this type of Alcatel 7x50 SR series port connector model. This name string may be used in CLI commands to specify a particular port connector model type.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2 |
tmnxPortConnectTypeDescriptionA detailed description of this Alcatel 7x50 SR series port connector model.ro TItemDescription (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3 |
tmnxPortConnectTypeStatusWhen tmnxPortConnectTypeStatus has a value of 'true' it indicates that this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4 |
tmnxPortFCStatsTableThe Network Port FC Stats table has an entry for each forwarding class defined on each network port.obsolete SEQUENCE OF TmnxPortNetworkFCStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.4.9 |
tmnxPortFCStatsEntryEach row entry represents a set of ingress and egress packet and octet statistics for the given network port and forwarding class. Rows in this table are created by the agent when the network port is provisioned and cannot be created or destroyed by SNMP Get or Set requests.obsolete TmnxPortNetworkFCStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.4.9.1 |
tmnxPortFCStatsIndexThe forwarding class associated with these stats on this network port.obsolete TFCName (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1 |
tmnxPortFCStatsIngFwdInProfPktsThe number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2 |
tmnxPortFCStatsIngFwdOutProfPktsThe number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3 |
tmnxPortFCStatsIngFwdInProfOctsThe number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4 |
tmnxPortFCStatsIngFwdOutProfOctsThe number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5 |
tmnxPortFCStatsIngDroInProfPktsThe number of in-profile packets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6 |
tmnxPortFCStatsIngDroOutProfPktsThe number of out-of-profile packets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7 |
tmnxPortFCStatsIngDroInProfOctsThe number of in-profile octets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8 |
tmnxPortFCStatsIngDroOutProfOctsThe number of out-of-profile octets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9 |
tmnxPortFCStatsEgrFwdInProfPktsThe number of in-profile packets (rate below CIR) forwarded by the egress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10 |
tmnxPortFCStatsEgrFwdOutProfPktsThe number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11 |
tmnxPortFCStatsEgrFwdInProfOctsThe number of in-profile octets (rate below CIR) forwarded by the egress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12 |
tmnxPortFCStatsEgrFwdOutProfOctsThe number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13 |
tmnxPortFCStatsEgrDroInProfPktsThe number of in-profile packets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14 |
tmnxPortFCStatsEgrDroOutProfPktsThe number of out-of-profile packets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15 |
tmnxPortFCStatsEgrDroInProfOctsThe number of in-profile octets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16 |
tmnxPortFCStatsEgrDroOutProfOctsThe number of out-of-profile octets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17 |
tmnxDS3TableThe tmnxDS3Table has an entry for a DS3 physical port. SEQUENCE OF TmnxDS3Entry .1.3.6.1.4.1.6527.3.1.2.2.4.10 |
tmnxDS3EntryEach row entry represents a physical DS3 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS3 MDA type The tmnxDS3Entry contains attributes that are unique to the 'ds3e3' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable. TmnxDS3Entry .1.3.6.1.4.1.6527.3.1.2.2.4.10.1 |
tmnxDS3BuildouttmnxDS3Buildout configures the T3 line buildout. A T3 port has two settings for the T3 line buildout: a short setting, which is less than 225 feet, and a long setting, which is greater than 225 feet. This object applies to copper-cable-based T3 ports only.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.10.1.1 |
tmnxDS3LastChangeTimeThe tmnxDS3LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3Entry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.10.1.2 |
tmnxDS3TypetmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.10.1.3 |
tmnxDS3ChannelTableThe tmnxDS3ChannelTable has an entry for a DS3 channel. SEQUENCE OF TmnxDS3ChannelEntry .1.3.6.1.4.1.6527.3.1.2.2.4.11 |
tmnxDS3ChannelEntryEach row entry represents a DS3 channel. Entries can be created and deleted via SNMP SET operations. The tmnxDS3ChannelEntry contains attributes that are applicable to a DS3 channel which can belong to the DS3 physical port or belong to a container on a sonet path. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3ChannelEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. TmnxDS3ChannelEntry .1.3.6.1.4.1.6527.3.1.2.2.4.11.1 |
tmnxDS3ChannelRowStatustmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1 |
tmnxDS3ChannelTypeThe value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2 |
tmnxDS3ChannelFramingThe value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'. If tmnxDS3ChannelType is set to 'e3', the default framing is 'g751'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3 |
tmnxDS3ChannelClockSourcetmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed').rw TmnxDSXClockSource .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4 |
tmnxDS3ChannelChannelizedtmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none' removes the sub-channels on the interface.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5 |
tmnxDS3ChannelSubrateCSUModetmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets the value of tmnxDS3ChannelScramble to 'false'. Changing the value of tmnxDS3ChannelSubrateCSUMode resets the value of tmnxDS3ChannelSubrate to default for the mode if tmnxDS3ChannelSubrate is not provided.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6 |
tmnxDS3ChannelSubratetmnxDS3ChannelSubrate configures the subrate step. tmnxDS3ChannelSubrate multiplied by the granularity for a particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives the absoulte subrate in kbps. ----------------------------------------------------------------------- Subrate CSU Mode|Granularity|Default |Range |Subrate speed range ----------------------------------------------------------`------------- notUsed | N/A | 0 | 0 |N/A digital-link | 301 kbps | 1 | 1 to 147 |301 kbps to 44.2 mbps -----------------------------------------------------------------------rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7 |
tmnxDS3ChannelIdleCycleFlagstmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HDLC channels only. For ATM channels the object does not really apply so a default value of 'none' is used and cannot be changed.rw TmnxDSXIdleCycleFlags .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8 |
tmnxDS3ChannelLoopbacktmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops the frames from the local system back at the framer. When the value is set to 'remote', a signal is sent to the remote system to provide a line loopback.rw TmnxDS3Loopback .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9 |
tmnxDS3ChannelBitErrorInsertionRatetmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, it disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.rw Integer32 (0 | 2..7) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10 |
tmnxDS3ChannelBERTPatterntmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration indicates the duration of the test. Setting the value of this object to 'none' terminates the test.rw TmnxDSXBertPattern .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11 |
tmnxDS3ChannelBERTDurationtmnxDS3ChannelBERTDuration is used to set the duration of the BERT test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12 |
tmnxDS3ChannelMDLEicStringtmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13 |
tmnxDS3ChannelMDLLicStringtmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14 |
tmnxDS3ChannelMDLFicStringtmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15 |
tmnxDS3ChannelMDLUnitStringtmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16 |
tmnxDS3ChannelMDLPfiStringtmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17 |
tmnxDS3ChannelMDLPortStringtmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18 |
tmnxDS3ChannelMDLGenStringtmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19 |
tmnxDS3ChannelMDLMessageTypetmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmission of the MDL path message. An MDL path message, as defined by ANSI T1.107, is distinguished from idle and test signal messages in that it contains a facility identification code as its final data element. idleSignal(1) - Enables transmission of the MDL idle signal message. An MDL idle signal message, as defined by ANSI T1.107, is distinguished from path and test signal messages in that it contains a port number as its final data element. testSignal(2) - Enables transmission of the MDL test signal message. An MDL test signal message, as defined by ANSI T1.107, is distinguished from path and idle signal messages in that it contains a generator number as its final data element.rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20 |
tmnxDS3ChannelFEACLoopRespondWhen tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21 |
tmnxDS3ChannelCRCThe value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For ATM channels, crc32 is the default and the only value supported and applies to AAL5 CRC calculation on that channel.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22 |
tmnxDS3ChannelMTUThe size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cemrw Unsigned32 (0|512..9208) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23 |
tmnxDS3ChannelOperMTUThe negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24 |
tmnxDS3ChannelReportAlarmThe value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS3/E3 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS3/E3 signal failure bit errors. berSf alarms are not issued by defaultrw TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25 |
tmnxDS3ChannelReportAlarmStatusThe value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port.ro TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26 |
tmnxDS3ChannelLastChangeTimeThe tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3ChannelEntry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27 |
tmnxDS3ChannelInFEACLooptmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28 |
tmnxDS3ChannelMDLMonPortStringtmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29 |
tmnxDS3ChannelMDLMonGenStringtmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30 |
tmnxDS3ChannelBERTOperStatustmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.ro TmnxDSXBertOperStatus .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31 |
tmnxDS3ChannelBERTSynchedtmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32 |
tmnxDS3ChannelBERTErrorstmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33 |
tmnxDS3ChannelBERTTotalBitstmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34 |
tmnxDS3ChannelScrambleWhen tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel and indicates ATM payload scrambling; otherwise (tmnxPortEncapType is not atmEncap) the default is 'false' and can only be changed to true if the value of tmnxDS3ChannelSubrateCSUMode is digital-link (1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35 |
tmnxDS3ChannelAcctPolicyIdThe value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel. A zero value indicates that there is no accounting policy associated with this channelrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36 |
tmnxDS3ChannelCollectStatsThe value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the network ds3 channel is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37 |
tmnxDS3ChannelClockSyncStateThe value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.ro TmnxDSXClockSyncState .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38 |
tmnxDS3ChannelClockMasterPortIdThe value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39 |
tmnxDS1TableThe tmnxDS1Table has an entry for each DS1 channel. SEQUENCE OF TmnxDS1Entry .1.3.6.1.4.1.6527.3.1.2.2.4.12 |
tmnxDS1EntryEach row entry represents a DS1 channel on a IOM card in a chassis in the system. DS1 channel entries for DS3 ports cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries for DS1 ports can be created and deleted via SNMP SET operations. For each tmnxDS1Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable. TmnxDS1Entry .1.3.6.1.4.1.6527.3.1.2.2.4.12.1 |
tmnxDS1RowStatustmnxDS1RowStatus controls the creation and deletion of row entries in the tmnxDS1Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1 |
tmnxDS1TypeThe value of tmnxDS1Type indicates whether the DS1 channel is in DS1, E1 or J1 mode.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2 |
tmnxDS1FramingThe value of tmnxDS1Framing indicates the type of framing associated with the channel: esf ESF (extended super frame) mode for T1 interfaces. sf SF (super frame) mode for T1 interfaces. g704 G.704 framing format for E1 interfaces. g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces. e1-unframed E1 Unframed (G.703) mode for E1 interfaces. ds1-unframed Unframed mode for T1 interfaces. If tmnxDS1Type is set to 'ds1', the default framing is 'esf'. If tmnxDS1Type is set to 'e1', the default framing is 'g704'. Changing the value of tmnxDS1Framing resets the values of tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults and turns off reporting of berSd and berSf alarms in tmnxDS1ReportAlarm.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3 |
tmnxDS1IdleCycleFlagstmnxDS1IdleCycleFlags configures the value that the DS1 channel transmits during idle cycle.rwobsolete TmnxDSXIdleCycleFlags .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4 |
tmnxDS1LoopbacktmnxDS1Loopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops frames from the local system back at the framer. A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid with tmnxDS1Framing set to 'esf' framing. A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312. This is valid with tmnxDS1Framing set to 'esf'. A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is valid with tmnxDS1Framing set to 'sf'.rw TmnxDS1Loopback .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5 |
tmnxDS1InvertDataSetting tmnxDS1InvertData to 'true' causes all data bits to be inverted, to guarantee ones density. It is typically used with AMI line encoding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6 |
tmnxDS1BitErrorInsertionRatetmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.rw Integer32 (0 | 2..7) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7 |
tmnxDS1BERTPatterntmnxDS1BERTPattern object indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicates the duration of the test. Setting the value to 'none' terminates the test.rw TmnxDSXBertPattern .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8 |
tmnxDS1BERTDurationtmnxDS1BERTDuration is used to set the duration of the BERT test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9 |
tmnxDS1ReportAlarmThe value of tmnxDS1ReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS1/E1/J1 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS1/E1/J1 signal failure bit errors. berSf alarms are not issued by defaultrw TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10 |
tmnxDS1ReportAlarmStatusThe value of tmnxDS1ReportAlarmStatus indicates the current alarms on this channel.ro TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11 |
tmnxDS1LastChangeTimeThe tmnxDS1LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1Entry row for this channel.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12 |
tmnxDS1ClockSourcetmnxDS1ClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential').rw TmnxDSXClockSource .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13 |
tmnxDS1BERTOperStatustmnxDS1BERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.ro TmnxDSXBertOperStatus .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14 |
tmnxDS1BERTSynchedtmnxDS1BERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15 |
tmnxDS1BERTErrorstmnxDS1BERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16 |
tmnxDS1BERTTotalBitstmnxDS1BERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17 |
tmnxDS1RemoteLoopRespondWhen tmnxDS1RemoteLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18 |
tmnxDS1InRemoteLooptmnxDS1InRemoteLoop indicates whether the remote end has put this channel in remote loopback.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19 |
tmnxDS1InsertSingleBitErrortmnxDS1InsertSingleBitError is used to insert a single bit error for a BERT test.rw TmnxActionType (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20 |
tmnxDS1SignalModeThe value of tmnxDS1SignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The default signalling is 'none'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21 |
tmnxDS1ClockSyncStateThe value of tmnxDS1ClockSyncState indicates the current clock synchronization state if tmnxDS1ClockSource is 'adaptive' or 'differential'.ro TmnxDSXClockSyncState .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22 |
tmnxDS1ClockMasterPortIdThe value of tmnxDS1ClockMasterPortId indicates the current clock synchronization master port id if tmnxDS1ClockSource is 'adaptive' or 'differential'.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23 |
tmnxDS1BerSdThresholdThe value of tmnxDS1BerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SD failure and a tmnxEqPortDS1AlarmClear notification for a BER SD failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit error is computed and what values of tmnxDS1BerSdThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSdThreshold set to default and cannot be changed tmnxDS1BerSdThreshold value must not exceed the value of tmnxDS1BerSfThreshold.rw Unsigned32 (1|5|10|50|100) UNITS "error bits in million bits received" .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24 |
tmnxDS1BerSfThresholdThe value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold valuerw Unsigned32 (1|5|10|50|100) UNITS "error bits in million bits received" .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25 |
tmnxDS0ChanGroupTableThe tmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS1 channel. SEQUENCE OF TmnxDS0ChanGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.13 |
tmnxDS0ChanGroupEntryEach row entry represents one or more DS0 channels on a DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or remove DS0 channels from the group. Entries can be created and deleted via SNMP SET operations using the tmnxDS0ChanGroupRowStatus object. For each tmnxDS0ChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. TmnxDS0ChanGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.13.1 |
tmnxDS0ChanGroupRowStatustmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1 |
tmnxDS0ChanGroupTimeSlotstmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. When a channel group is created on unframed DS1/E1, all timeslots as applicable to a given speed are auto-allocated and cannot be changed. When a channel group is created on a framed DS1/E1 or existing channel group's encapsulation is changed from ATM, the default of no timeslots is auto-assigned to the group. When a channel group on a framed DS1/E1 is configured for ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1) and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed.rw TmnxDs0ChannelList .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2 |
tmnxDS0ChanGroupSpeedtmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3 |
tmnxDS0ChanGroupCRCThe value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For channel groups with encapsulation set to ATM, the default and only supported value is crc32 and applies to AAL5 CRC calculations on that channel group.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4 |
tmnxDS0ChanGroupMTUThe size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cemrw Unsigned32 (0|512..9208) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5 |
tmnxDS0ChanGroupOperMTUThe negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6 |
tmnxDS0ChanGroupLastChangeTimeThe tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS0ChanGroupEntry row for this channel group.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7 |
tmnxDS0ChanGroupIdleCycleFlagstmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applies to HDLC channels only. For ATM and CEM channels the object does not really apply so a default value of 'none' is used and cannot be changed.rw TmnxDSXIdleCycleFlags .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8 |
tmnxDS0ChanGroupScrambletmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel, otherwise the default is 'false' and not allowed to change.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9 |
tmnxDS0ChanGroupAcctPolicyIdThe value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel-group. A zero value indicates that there is no accounting policy associated with this channelrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10 |
tmnxDS0ChanGroupCollectStatsThe value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the network ds0 channel-group is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11 |
tmnxDS0ChanGroupPayloadFillTypeThe value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' For a ds1-unframed and e1-unframed CEM encap DS0 channel group the only supported value is 'allOnes'. For non-CEM encap channel groups the value cannot be changed.rw TmnxDSXIdleFillType .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12 |
tmnxDS0ChanGroupPayloadPatternThe value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13 |
tmnxDS0ChanGroupSignalFillTypeThe value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupSignalPattern is used to define the signal pattern. The default value depends on the encap of the DS0 channel group and the signal-mode of the DS1/E1: For CEM encap on DS1/E1 with CAS signal mode - 'allOnes' For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable' For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM encap channel groups the value cannot be changed.rw TmnxDSXIdleFillType .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14 |
tmnxDS0ChanGroupSignalPatternThe value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD) CAS SF DS1 supports 2 signalling bits per timeslot (AB) The default value depends on the type of channel group: For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15) For CAS DS1 SF channel group - 3 (Valid range 0..3) For non-CAS or non-CEM channel group - 0 (Valid range 0..0)rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15 |
tmnxBundleTableThe tmnxBundleTable has an entry for a bundle created on the system. SEQUENCE OF TmnxBundleEntry .1.3.6.1.4.1.6527.3.1.2.2.4.14 |
tmnxBundleEntryEach row entry represents a multilink bundle on a MDA. Entries can be created and deleted via SNMP SET operations using the tmnxBundleRowStatus object. The tmnxBundleBundleID will contain the bundle number encoded in it. The bundle number is unique for a MDA. For each tmnxBundleEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. TmnxBundleEntry .1.3.6.1.4.1.6527.3.1.2.2.4.14.1 |
tmnxBundleBundleIDtmnxBundleBundleID identifies this multilink bundle. The value of this object is calculated using the TiMOS encoding scheme described in TmnxBundleID. tmnxBundleBundleID is used as an index into the ifTable and the tmnxPortTable to access an entry corresponding to this entry. TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1 |
tmnxBundleRowStatustmnxBundleRowStatus controls the creation and deletion of row entries in the tmnxBundleTable. The manager has to first calculate the tmnxBundleBundleID based on the TiMOS encoding.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2 |
tmnxBundleTypetmnxBundleType specifies the type of this multilink bundle. It provides a reference as to the type of bundle this row refers to but does not map to the direct value of bndle type defined in TmnxBundleID.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3 |
tmnxBundleMinimumLinkstmnxBundleMinimumLinks is the minimum number of links that must be active for a bundle to be active. If the number of links drop below the given minimum then the multilink bundle will transition to an operation down state.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.4 |
tmnxBundleNumLinkstmnxBundleNumLinks indicates the total number of links configured for this bundle.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.5 |
tmnxBundleNumActiveLinkstmnxBundleNumActiveLinks indicates the current number of active links belonging to this bundle.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6 |
tmnxBundleMRRUtmnxBundleMRRU is used to configure the Max Received Reconstructed Unit (MRRU). This is the maximum frame that can be reconstructed from multilink fragments. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.rw Unsigned32 (0|1500..9206) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7 |
tmnxBundleOperMRRUtmnxBundleOperMRRU indicates the operational value of Max Received Reconstructed Unit (MRRU). This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8 |
tmnxBundlePeerMRRUtmnxBundlePeerMRRU indicates the MRRU value sent by the peer during negotiation. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9 |
tmnxBundleOperMTUtmnxBundleOperMTU indicates the operational MTU of the bundle.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10 |
tmnxBundleRedDiffDelaytmnxBundleRedDiffDelay configures the maximum acceptable differential delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded trap is issued. For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported, 0 to 25 otherwise.rw Unsigned32 (0..25|0..50) UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11 |
tmnxBundleRedDiffDelayActiontmnxBundleRedDiffDelayAction specifies the action to be taken when the differential delay exceeds the threshold configured in tmnxBundleRedDiffDelay. For a tmnxBundleType value of 'imagrp', only the down action is supported.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12 |
tmnxBundleYellowDiffDelaytmnxBundleYellowDiffDelay configures the yellow warning threshold for the differential delay for the circuits within a given multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued. This object is only applicable to tmnxBundleType values of 'mlppp' or 'mlfr'. All non applicable types have a value of zero.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13 |
tmnxBundleShortSequencetmnxBundleShortSequence command specifies that the MLPPP bundle should use short (12 bit) sequence numbers. Instead of the standard long (24 bits) sequence number. This object is only applicable to tmnxBundleType values of mlppp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14 |
tmnxBundleLastChangeTimeThe tmnxBundleLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxBundleEntry row for this channel group.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15 |
tmnxBundleFragmentThresholdThe value of tmnxBundleFragmentThreshold specifies the maximum length of a fragment transmitted across the multilink bundle. Values supported within each bundle type are H/W dependent. The value of 0 specifies no fragmentation. Currently, the following values are supported depending upon the tmnxBundleType value: tmnxBundleType tmnxBundleFragmentThreshold values supported mlppp 0; 128 to 512 inclusive imagrp 128rw Unsigned32(0|128..512) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16 |
tmnxBundleUpTimetmnxBundleUpTime indicates the time since the bundle is operationally 'inService'.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17 |
tmnxBundleInputDiscardstmnxBundleInputDiscards indicates the number of LCP packets that were discarded. This object is only supported for a tmnxBundleType value of mlppp.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18 |
tmnxBundlePrimaryMemberPortIDtmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary member of this bundle. The value of this object will be zero if there are no members configured in this bundle.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19 |
tmnxBundleLFItmnxBundleLFI specifies if Link Fragmentation and Interleaving is enabled on the multilink bundle. A value of 'false' indicates that Link Fragmentation and Interleaving is disabled on the multilink bundle while a value of 'true' indicates that Link Fragmentation and Interleaving is enabled on the multilink bundle. This object is only supported for tmnxBundleType value of mlppp. The value of tmnxBundleLFI may be modified only when no members are part of the bundle. This object cannot be set to true when tmnxBundleMlpppClassCount object value is set to enable Multiclass MLPPP on the bundle.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20 |
tmnxBundleProtectedTypetmnxBundleProtectedType identifies how this bundle is part of a tmnxBundleParentBundle. A value of 'none' identifies no protection, 'working' identifies it to be a working bundle of a tmnxBundleParentBundle and 'protection' identifies it to be a protection bundle of a tmnxBundleParentBundle. tmnxBundleProtectedType can only be set at row creation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21 |
tmnxBundleParentBundletmnxBundleParentBundle specifies the parent to which this bundle belongs. A row for the given non zero walue of tmnxBundleParentBundle must exist for this row to be successfully created. If a bundle has no parent, its value is zero. tmnxBundleParentBundle can only be set at row creation.rw TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22 |
tmnxBundleMemberTableThe tmnxBundleMemberTable has an entry for a member port associated with a multilink bundle. SEQUENCE OF TmnxBundleMemberEntry .1.3.6.1.4.1.6527.3.1.2.2.4.15 |
tmnxBundleMemberEntryEach row represents a port associated with a bundle. Entries can be added or removed from this table using SNMP SET operation. TmnxBundleMemberEntry .1.3.6.1.4.1.6527.3.1.2.2.4.15.1 |
tmnxBundleMemberRowStatustmnxBundleMemberRowStatus controls the creation and deletion of row entries in the tmnxBundleMemberTable. tmnxPortPortID identifies the port to be associated with the bundle. A bundle entry with tmnxBundleBundleID has to exist in the tmnxBundleTable before creating an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1 |
tmnxBundleMemberActivetmnxBundleMemberActive is set to 'false' for one of reasons in tmnxBundleMemberDownReason.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2 |
tmnxBundleMemberDownReasontmnxBundleMemberDownReason contains the reason code for marking the member link of the bundle to down (i.e. tmnxBundleMemberActive will be set to false): none - The link is active and the value of tmnxBundleMemberActive is 'true'. outOfService - The link operational status is down. redDiffDelayExceeded - The differential delay of the link exceeded the configured value of red differential delay and tmnxBundleRedDiffDelayAction was configured as 'down'. mismatchEndPtDiscriminator - Detected inconsistent peer endpoint discriminator for the bundle. peerNotBundleMember - When the peer is either not added to the bundle or is removed from the bundle. underNegotiation - When the local end is trying to negotiate with the peer. peerInvalidMlHdrFmt - The peer does not support the required ML-PPP header format. The remote peer must support the same short/long sequence code, and at least as many classes as configured for the local bundle.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3 |
tmnxBundleMemberUpTimetmnxBundleMemberUpTime indicates the time since the bundle member is active as indicated by tmnxBundleMemberActive.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4 |
tmnxPortToChannelTableThe tmnxPortToChannelTable is a mapping table. Given a chassis index, physical port index and channel string, it maps it to the index of the channel. This channel index can then be used as an index into the ifTable or the tmnxPortTable. SEQUENCE OF TmnxPortToChannelEntry .1.3.6.1.4.1.6527.3.1.2.2.4.16 |
tmnxPortToChannelEntryEach row represents a mapping of the physical port index and the channel index string to the index of the channel. TmnxPortToChannelEntry .1.3.6.1.4.1.6527.3.1.2.2.4.16.1 |
tmnxChannelIdxStringtmnxChannelIdxString is an index into the table. It contains a string identifying a channel on the physical port. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1 |
tmnxChannelPortIDtmnxChannelPortID contains the port ID of the channel. This value is used to identify the entry for this channel in the ifTable or the tmnxPortTable.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2 |
tmnxPortIngrMdaQosStatTableThe table tmnxPortIngrMdaQosStatTable contains a row for each ethernet port located on an oversubscribed MDA. SEQUENCE OF TmnxPortIngrMdaQosStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.17 |
tmnxPortIngrMdaQosStatEntryEach row entry indicates the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA. tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates the ingress rate configured for the port. TmnxPortIngrMdaQosStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.17.1 |
tmnxPortIngrMdaQos00StatDropPktstmnxPortIngrMdaQos00StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1 |
tmnxPortIngrMdaQos00StatDropOctstmnxPortIngrMdaQos00StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2 |
tmnxPortIngrMdaQos01StatDropPktstmnxPortIngrMdaQos01StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3 |
tmnxPortIngrMdaQos01StatDropOctstmnxPortIngrMdaQos01StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4 |
tmnxPortIngrMdaQos02StatDropPktstmnxPortIngrMdaQos02StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5 |
tmnxPortIngrMdaQos02StatDropOctstmnxPortIngrMdaQos02StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6 |
tmnxPortIngrMdaQos03StatDropPktstmnxPortIngrMdaQos03StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7 |
tmnxPortIngrMdaQos03StatDropOctstmnxPortIngrMdaQos03StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8 |
tmnxPortIngrMdaQos04StatDropPktstmnxPortIngrMdaQos04StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9 |
tmnxPortIngrMdaQos04StatDropOctstmnxPortIngrMdaQos04StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10 |
tmnxPortIngrMdaQos05StatDropPktstmnxPortIngrMdaQos05StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11 |
tmnxPortIngrMdaQos05StatDropOctstmnxPortIngrMdaQos05StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12 |
tmnxPortIngrMdaQos06StatDropPktstmnxPortIngrMdaQos06StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13 |
tmnxPortIngrMdaQos06StatDropOctstmnxPortIngrMdaQos06StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14 |
tmnxPortIngrMdaQos07StatDropPktstmnxPortIngrMdaQos07StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15 |
tmnxPortIngrMdaQos07StatDropOctstmnxPortIngrMdaQos07StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16 |
tmnxPortIngrMdaQos08StatDropPktstmnxPortIngrMdaQos08StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17 |
tmnxPortIngrMdaQos08StatDropOctstmnxPortIngrMdaQos08StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18 |
tmnxPortIngrMdaQos09StatDropPktstmnxPortIngrMdaQos09StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19 |
tmnxPortIngrMdaQos09StatDropOctstmnxPortIngrMdaQos09StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20 |
tmnxPortIngrMdaQos10StatDropPktstmnxPortIngrMdaQos10StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21 |
tmnxPortIngrMdaQos10StatDropOctstmnxPortIngrMdaQos10StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22 |
tmnxPortIngrMdaQos11StatDropPktstmnxPortIngrMdaQos11StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23 |
tmnxPortIngrMdaQos11StatDropOctstmnxPortIngrMdaQos11StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24 |
tmnxPortIngrMdaQos12StatDropPktstmnxPortIngrMdaQos12StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25 |
tmnxPortIngrMdaQos12StatDropOctstmnxPortIngrMdaQos12StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26 |
tmnxPortIngrMdaQos13StatDropPktstmnxPortIngrMdaQos13StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27 |
tmnxPortIngrMdaQos13StatDropOctstmnxPortIngrMdaQos13StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28 |
tmnxPortIngrMdaQos14StatDropPktstmnxPortIngrMdaQos14StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29 |
tmnxPortIngrMdaQos14StatDropOctstmnxPortIngrMdaQos14StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30 |
tmnxPortIngrMdaQos15StatDropPktstmnxPortIngrMdaQos15StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31 |
tmnxPortIngrMdaQos15StatDropOctstmnxPortIngrMdaQos15StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32 |
tmnxSonetGroupTableThe tmnxSonetGroupTable has an entry for each Tributary Unit Group(TUG3) on a path. On a port which supports unchannelized STS-3's, rows in this table are created when a channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3. On a port which does not support unchannelized STS-3's, the rows in this table are implicitly created when a STS-3 is created in the tmnxSonetPathTable. Entries in this table are implicitly deleted when the parent entry of this group is deleted from the tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent is set to something other than sdhTug3. SEQUENCE OF TmnxSonetGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.18 |
tmnxSonetGroupEntryEach row entry represents a Tributary Unit Group(TUG3) on a path. TmnxSonetGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.18.1 |
tmnxSonetGroupTypetmnxSonetGroupType indicates the sonet group type of this entry. For STS-3/STM-1 channelization, the value of this object will be 'sdhTug3'.ro TmnxMDAChanType (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1 |
tmnxSonetGroupParentPortIDtmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of this group.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2 |
tmnxSonetGroupChildTypetmnxSonetGroupChildType is used to configure the type of the children of this group. Based on the value of this object, entries of a certain channel type can be created in the tmnxSonetPathTable. For example, if the value of this object is set to 'sonetVt15', then 28 entries of type 'sonetVt15' can be created in the tmnxSonetPathTable.rw TmnxMDAChanType (ALCATEL-IND1-TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3 |
tmnxSonetGroupNametmnxSonetGroupName is the textual name for this sonet group.ro TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4 |
tmnxPortScalarObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.4.19 |
tmnxL4LoadBalancingThe value of tmnxL4LoadBalancing specifies whether layer 4 information, src and dst ports, should be used in the LAG and ECMP hashing algorithm. This is the global system setting that all ports will inherit. When set to 'true', src and dst ports are used in the hashing algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can override tmnxL4LoadBalancing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.19.1 |
tmnxCiscoHDLCTableThe tmnxCiscoHDLCTable has an entry for each port in the system that is configured for Cisco HDLC. It contains the parameters related to Cisco HDLC protocol on this port. SEQUENCE OF TmnxCiscoHDLCEntry .1.3.6.1.4.1.6527.3.1.2.2.4.20 |
tmnxCiscoHDLCEntryThe tmnxCiscoHDLCEntry specifies parameters for a particular interfaces running Cisco HDLC encapsulation. Entries cannot be created and deleted via SNMP SET operations. TmnxCiscoHDLCEntry .1.3.6.1.4.1.6527.3.1.2.2.4.20.1 |
tmnxCiscoHDLCKeepAliveInttmnxCiscoHDLCKeepAliveInt specifies the interval in seconds used for sending periodic keepalive packets. The default value is set to 10 seconds. A value of 0 specifies that the keepalive function is turned off. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1 |
tmnxCiscoHDLCUpCounttmnxCiscoHDLCUpCount specifies the number of continual keepalive packets that has to be received to declare the link up. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2 |
tmnxCiscoHDLCDownCounttmnxCiscoHDLCDownCount specifies the number of 'tmnxCiscoHDLCKeepAliveInt' intervals that must pass without receiving a keepalive packet before the link is declared down. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3 |
tmnxCiscoHDLCOperStateThe value of tmnxCiscoHDLCOperState indicates the operational status of the Cisco HDLC protocol for this port.ro TmnxOperState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4 |
tmnxBundleImaGrpTableThe tmnxBundleImaGrpTable contains IMA Group data SEQUENCE OF TmnxBundleImaGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.21 |
tmnxBundleImaGrpEntryEach row entry contains data on an IMA Group. TmnxBundleImaGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.21.1 |
tmnxBundleImaGrpLnkActTimertmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer used to clear an existing LIF, LODS and FRI-IMA alarm. The time specified determines how long is needed for member links to stabilize before being activated.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1 |
tmnxBundleImaGrpLnkDeactTimertmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer used to raise an LIF, LODS and FRI-IMA alarm. The time specified determines how long before a member link is declared in error and is deactivated.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2 |
tmnxBundleImaGrpSymmetryModetmnxBundleImaGrpSymmetryMode specifies the type of cell rate transfer over the virtual link.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3 |
tmnxBundleImaGrpTxIdtmnxBundleImaGrpTxId specifies the IMA Id generated at group creation time used by the near-end.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4 |
tmnxBundleImaGrpRxIdtmnxBundleImaGrpRxId specifies the IMA ID generated at group creation time used by the far-end.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5 |
tmnxBundleImaGrpTxRefLnktmnxBundleImaGrpTxRefLnk specifies the IMA bundle member that was selected to be the transmit timing reference link. If no member has been selected as the reference link a value of zero is returned.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6 |
tmnxBundleImaGrpRxRefLnktmnxBundleImaGrpRxRefLnk specifies the IMA bundle member that was detected to be the receive timing reference link. If no member has been detected as the reference link a value of zero is returned.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7 |
tmnxBundleImaGrpSmNeStatetmnxBundleImaGrpSmNeState specifies the current state of the IMA Group for the near-end.ro TmnxImaGrpState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8 |
tmnxBundleImaGrpSmFeStatetmnxBundleImaGrpSmFeState specifies the current state of the IMA Group for the far-end.ro TmnxImaGrpState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9 |
tmnxBundleImaGrpSmFailStatetmnxBundleImaGrpSmFailState specifies the current state of the IMA Group.ro TmnxImaGrpFailState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10 |
tmnxBundleImaGrpSmDownSecstmnxBundleImaGrpSmDownSecs specifies the number of seconds that the IMA Group State Machine is not Operational.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11 |
tmnxBundleImaGrpSmOperSecstmnxBundleImaGrpSmOperSecs specifies the number of seconds that the IMA Group State Machine has been in the Operational State.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12 |
tmnxBundleImaGrpAvailTxCRtmnxBundleImaGrpAvailTxCR specifies the available transmit bandwidth on this IMA group. It only considers members that are in the Active State.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13 |
tmnxBundleImaGrpAvailRxCRtmnxBundleImaGrpAvailRxCR specifies the available bandwidth on this IMA group in the receive direction. It only considers members that are in the Active State.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14 |
tmnxBundleImaGrpNeFailstmnxBundleImaGrpNeFails specifies the number of reported IMA Group failures since boot time.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15 |
tmnxBundleImaGrpFeFailstmnxBundleImaGrpFeFails specifies the number of reported IMA Group far-end failures since boot time.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16 |
tmnxBundleImaGrpTxIcpCellstmnxBundleImaGrpTxIcpCells specifies number of transmitted ICP cells for this IMA Group.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17 |
tmnxBundleImaGrpRxIcpCellstmnxBundleImaGrpRxIcpCells specifies number of received ICP cells for this IMA Group.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18 |
tmnxBundleImaGrpErrorIcpCellstmnxBundleImaGrpErrorIcpCells specifies number of ICP cells with HEC or CRC-10 errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19 |
tmnxBundleImaGrpLostRxIcpCellstmnxBundleImaGrpLostRxIcpCells specifies the number of missing ICP cells at the expected offset.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20 |
tmnxBundleImaGrpTxOamLablValtmnxBundleImaGrpTxOamLablVal specifies near-end value to be transmitted.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21 |
tmnxBundleImaGrpRxOamLablValtmnxBundleImaGrpRxOamLablVal specifies far-end value received.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22 |
tmnxBundleImaGrpAlphaValuetmnxBundleImaGrpAlphaValue specifies the number of consecutive ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23 |
tmnxBundleImaGrpBetaValuetmnxBundleImaGrpBetaValue specifies the number of consecutive errored ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt Staterw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24 |
tmnxBundleImaGrpGammaValuetmnxBundleImaGrpGammaValue specifies the number of consecutive valid ICP cells that need to be detected before moving from the IMA pre-Sync State to the IMA Hunt State.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25 |
tmnxBundleImaGrpNeClockModetmnxBundleImaGrpNeClockMode specifies near-end transmit clock mode.rw TmnxImaGrpClockModes .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26 |
tmnxBundleImaGrpFeClockModetmnxBundleImaGrpFeClockMode specifies far-end transmit clock mode.rw TmnxImaGrpClockModes .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27 |
tmnxBundleImaGrpVersiontmnxBundleImaGrpVersion specifies the IMA Version for this group.rw TmnxImaGrpVersion .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28 |
tmnxBundleImaGrpMaxConfBwtmnxBundleImaGrpMaxConfBw specifies the number of links that is used to determine the maximum configurable bandwidth that is allowed to be used for this IMA group.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29 |
tmnxBundleImaGrpTestStatetmnxBundleImaGrpTestState specifies the current state of the test pattern procedure. A value of 'disabled' specifies that the group is currently not running. A value of 'operating' enables the test pattern procedure. The test pattern procedure continues until it is 'disabled'.rw TmnxImaTestState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30 |
tmnxBundleImaGrpTestMembertmnxBundleImaGrpTestMember specifies a member link to be used for the test pattern procedure. A value of zero indicates that no member link has been selected. When tmnxBundleImaGrpTestState does not have the value 'disabled', an attempt to set this object will be rejected with an inconsistentValue error.rw TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31 |
tmnxBundleImaGrpTestPatterntmnxBundleImaGrpTestPattern specifies the Transmit Test Pattern in an IMA group loopback operation. This value may only be changed when tmnxBundleImaGrpTestState is 'disabled'.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32 |
tmnxBundleImaGrpDiffDelayMaxObstmnxBundleImaGrpDiffDelayMaxObs indicates the latest maximum differential delay observed between links having the least and most link propagation delay among the received links configured in this IMA group.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33 |
tmnxBundleImaGrpLeastDelayLinktmnxBundleImaGrpLeastDelayLink indicates a member link which has the smallest link propagation delay. If this delay has yet to be determined or no member link has been configured, a value of zero is returned.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.34 |
tmnxBundleMemberImaTableThe tmnxBundleMemberImaTable has an entry for an IMA link associated with an IMA Group. SEQUENCE OF TmnxBundleMemberImaEntry .1.3.6.1.4.1.6527.3.1.2.2.4.22 |
tmnxBundleMemberImaEntryEach row entry represents an IMA link associated with an IMA Group. TmnxBundleMemberImaEntry .1.3.6.1.4.1.6527.3.1.2.2.4.22.1 |
tmnxBundleMemberImaNeTxStatetmnxBundleMemberImaNeTxState indicates the state of near-end transmit IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1 |
tmnxBundleMemberImaNeRxStatetmnxBundleMemberImaNeRxState indicates the state of near-end receive IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2 |
tmnxBundleMemberImaFeTxStatetmnxBundleMemberImaFeTxState indicates the state of far-end transmit IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3 |
tmnxBundleMemberImaFeRxStatetmnxBundleMemberImaFeRxState indicates the state of far-end receive IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4 |
tmnxBundleMemberImaNeRxFailStatetmnxBundleMemberImaNeRxFailState indicates the IMA link failure reason for the near-end.ro TmnxImaLnkFailState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5 |
tmnxBundleMemberImaFeRxFailStatetmnxBundleMemberImaFeRxFailState indicates the IMA link failure reason for the far-end.ro TmnxImaLnkFailState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6 |
tmnxBundleMemberImaTxLidtmnxBundleMemberImaTxLid indicates the Link Identifier assigned to the transmit IMA link.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7 |
tmnxBundleMemberImaRxLidtmnxBundleMemberImaRxLid indicates the Link Identifier used on the receive IMA link.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8 |
tmnxBundleMemberImaViolationstmnxBundleMemberImaViolations indicates the number of ICP violations including errored, invalid or missing ICP cells.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9 |
tmnxBundleMemberImaNeSevErrSecstmnxBundleMemberImaNeSevErrSecs indicates the number of one second intervals in which thirty percent or more of the near-end ICP cells are in violation, or link defects have occurred.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10 |
tmnxBundleMemberImaFeSevErrSecstmnxBundleMemberImaFeSevErrSecs indicates the number of one second intervals in which the far-end contains IMA-RDI defects.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11 |
tmnxBundleMemberImaNeUnavailSecstmnxBundleMemberImaNeUnavailSecs indicates the number of unavailable seconds at the near-end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12 |
tmnxBundleMemberImaFeUnavailSecstmnxBundleMemberImaFeUnavailSecs indicates the number of unavailable seconds at the near-end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13 |
tmnxBundleMemberImaNeTxUnuseSecstmnxBundleMemberImaNeTxUnuseSecs indicates the number of unavailable seconds at the near-end transmit link state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14 |
tmnxBundleMemberImaNeRxUnuseSecstmnxBundleMemberImaNeRxUnuseSecs indicates the number of unavailable seconds at the near-end receive link state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15 |
tmnxBundleMemberImaFeTxUnuseSecstmnxBundleMemberImaFeTxUnuseSecs indicates the number of unavailable seconds at the far-end transmit link state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16 |
tmnxBundleMemberImaFeRxUnuseSecstmnxBundleMemberImaFeRxUnuseSecs indicates the number of unavailable seconds at the far-end receive link state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17 |
tmnxBundleMemberImaNeTxNumFailstmnxBundleMemberImaNeTxNumFails indicates the number of times that a near-end transmit alarm is set on the IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18 |
tmnxBundleMemberImaNeRxNumFailstmnxBundleMemberImaNeRxNumFails indicates the number of times that a near-end receive alarm is set on the IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19 |
tmnxBundleMemberImaFeTxNumFailstmnxBundleMemberImaFeTxNumFails indicates the number of times that a far-end transmit alarm is set on the IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20 |
tmnxBundleMemberImaFeRxNumFailstmnxBundleMemberImaFeRxNumFails indicates the number of times that a far-end receive alarm is set on the IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21 |
tmnxBundleMemberImaTxIcpCellstmnxBundleMemberImaTxIcpCells indicates the number of ICP cells that have been transmitted on the IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22 |
tmnxBundleMemberImaRxIcpCellstmnxBundleMemberImaRxIcpCells indicates the number of ICP cells that have been received on the IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23 |
tmnxBundleMemberImaErrorIcpCellstmnxBundleMemberImaErrorIcpCells indicates the number of ICP cells with HEC or CRC-10 errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24 |
tmnxBundleMemberImaLstRxIcpCellstmnxBundleMemberImaLstRxIcpCells indicates the number of lost ICP cells at the expected offset.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25 |
tmnxBundleMemberImaOifAnomaliestmnxBundleMemberImaOifAnomalies indicates the number of OIF anomalies at the near-end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26 |
tmnxBundleMemberImaRxTestStatetmnxBundleMemberImaRxTestState indicates the current state of the test pattern on this link.ro TmnxImaTestState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27 |
tmnxBundleMemberImaRxTestPatterntmnxBundleMemberImaRxTestPattern indicates the received test pattern value on this link.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28 |
tmnxBundleMemberImaRelDelaytmnxBundleMemberImaRelDelay indicates the latest measured delay on this member link relative to the member link with the least delay within the same IMA groupro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29 |
tmnxDS1PortTableThe tmnxDS1PortTable has an entry for a DS1 physical port. SEQUENCE OF TmnxDS1PortEntry .1.3.6.1.4.1.6527.3.1.2.2.4.23 |
tmnxDS1PortEntryEach row entry represents a physical DS1 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS1 MDA type The tmnxDS1PortEntry contains attributes that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS1PortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. TmnxDS1PortEntry .1.3.6.1.4.1.6527.3.1.2.2.4.23.1 |
tmnxDS1PortBuildouttmnxDS1PortBuildout configures the cable buildout length. A ds1 port has two settings for the DS1 cable buildout: a 'short' setting, for cable lengths of less than or equal to 655 feet, and a 'long' setting for cable lengths of greater than 655 feet. This object applies to copper-cable-based DS1 ports only.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1 |
tmnxDS1PortLastChangeTimeThe tmnxDS1PortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1PortEntry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2 |
tmnxDS1PortTypetmnxDS1PortType configures the type of the physical port to 'ds1', 'e1' or 'j1'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3 |
tmnxDS1PortLineLengthtmnxDS1PortLineLength configuration only applies to a ds1 port configured with a 'short' buildout. tmnxDS1PortLineLength configures the length of the line (in feet). For line lengths longer than 655 feet configure the ds1 port buildout as 'long'. For 'long' buildout the following values are valid: lengthNotApplicable - Not applicable For 'short' buildout the following values are valid: length0To133 - For line length from 0 to 133 feet length134To266 - For line length from 134 to 266 feet length267To399 - For line length from 267 to 399 feet length400To533 - For line length from 400 to 533 feet length534To655 - For line length from 534 to 655 feet The default for 'long' buildout is 'lengthNotApplicable' while the default for 'short' buildout is 'length0To133'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4 |
tmnxDS1PortLbotmnxDS1PortLbo configuration only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortLbo configures the number of decibels(dB) the transmission signal decreases over the line. For 'short' buildout the following values are valid: lboNotApplicable - Not applicable For 'long' buildout the following values are valid: lbo0dB - For 0 dB lboNeg7p5dB - For -7.5 dB lboNeg15p0dB - For -15.0 dB lboNeg22p5dB - For -22.5 dB The default for 'short' build out is 'lboNotApplicable' while the default for 'long' buildout is 'lbo0dB'rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5 |
tmnxDS1PortDbGaintmnxDS1PortDbGain only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortDbGain shows the number of decibels the received signal is increased to compensate for loss.ro Integer32 UNITS "db" .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6 |
tmnxPortSchedOverrideTableThe tmnxPortSchedOverrideTable has an entry for each port scheduler override configured on this system. SEQUENCE OF TmnxPortSchedOverrideEntry .1.3.6.1.4.1.6527.3.1.2.2.4.24 |
tmnxPortSchedOverrideEntryEach row represents a particular port-scheduler override. Entries are created and deleted by the user. TmnxPortSchedOverrideEntry .1.3.6.1.4.1.6527.3.1.2.2.4.24.1 |
tmnxPortSchedOverrideRowStatusThe value of tmnxPortSchedOverrideRowStatus is used for the creation and deletion of port-scheduler overrides. When tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the same indices of this table is an empty string, creation will fail.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1 |
tmnxPortSchedOverrideSchedNameThe value of tmnxPortSchedOverrideSchedName indicates the name of the port scheduler policy that this row entry overrides.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2 |
tmnxPortSchedOverrideLastChangedThe value of tmnxPortSchedOverrideLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3 |
tmnxPortSchedOverrideMaxRateThe value of tmnxPortSchedOverrideMaxRate specifies the explicit maximum frame based bandwidth limit. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4 |
tmnxPortSchedOverrideLvl1PIRThe value of tmnxPortSchedOverrideLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5 |
tmnxPortSchedOverrideLvl1CIRThe value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir bandwidth limit for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6 |
tmnxPortSchedOverrideLvl2PIRThe value of tmnxPortSchedOverrideLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7 |
tmnxPortSchedOverrideLvl2CIRThe value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir bandwidth limit for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8 |
tmnxPortSchedOverrideLvl3PIRThe value of tmnxPortSchedOverrideLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9 |
tmnxPortSchedOverrideLvl3CIRThe value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir bandwidth limit for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10 |
tmnxPortSchedOverrideLvl4PIRThe value of tmnxPortSchedOverrideLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11 |
tmnxPortSchedOverrideLvl4CIRThe value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir bandwidth limit for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12 |
tmnxPortSchedOverrideLvl5PIRThe value of tmnxPortSchedOverrideLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13 |
tmnxPortSchedOverrideLvl5CIRThe value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir bandwidth limit for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14 |
tmnxPortSchedOverrideLvl6PIRThe value of tmnxPortSchedOverrideLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15 |
tmnxPortSchedOverrideLvl6CIRThe value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir bandwidth limit for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16 |
tmnxPortSchedOverrideLvl7PIRThe value of tmnxPortSchedOverrideLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17 |
tmnxPortSchedOverrideLvl7CIRThe value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir bandwidth limit for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18 |
tmnxPortSchedOverrideLvl8PIRThe value of tmnxPortSchedOverrideLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19 |
tmnxPortSchedOverrideLvl8CIRThe value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir bandwidth limit for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20 |
tmnxPortSchedOverrideFlagsThe value of tmnxPortSchedOverrideFlags specifies the set of attributes whose values have been overridden via management on this port scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined in the port's port-scheduler policy.rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21 |
tmnxBPGrpAssocTableThe tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created on the system. SEQUENCE OF TmnxBPGrpAssocEntry .1.3.6.1.4.1.6527.3.1.2.2.4.25 |
tmnxBPGrpAssocEntryEach row displays the relationship between a Bundle Protection group and its working and protection bundle. TmnxBPGrpAssocEntry .1.3.6.1.4.1.6527.3.1.2.2.4.25.1 |
tmnxBPGrpAssocWorkingBundleIDtmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value of zero is given if no working bundle is associated with the given tmnxBundleBundleID.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1 |
tmnxBPGrpAssocProtectBundleIDtmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value of zero is given if no protection bundle is associated with the given tmnxBundleBundleID.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2 |
tmnxBPGrpAssocActiveBundleIDtmnxBPGrpAssocActiveBundleID identifies the bundle that is considered the active bundle. This bundle contains the members that are part of the active aps port. A value of zero is given if no bundle is considered active.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3 |
tmnxBundleMlpppTableThe tmnxBundleMlpppTable contains MLPPP specific data. SEQUENCE OF TmnxBundleMlpppEntry .1.3.6.1.4.1.6527.3.1.2.2.4.26 |
tmnxBundleMlpppEntryEach row entry contains data on an MLPPP Bundle. TmnxBundleMlpppEntry .1.3.6.1.4.1.6527.3.1.2.2.4.26.1 |
tmnxBundleMlpppEndpointIDtmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator identifier value within the specified tmnxBundleMlpppEndpointIDClass. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1 |
tmnxBundleMlpppEndpointIDClasstmnxBundleMlpppEndpointIDClass specifies the Link Control Protocol Endpoint Descriminator Class field type of the tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value. Bundle DEFVAL Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3) MLPPP Bundle Protection Group ipAddress (2)rw TmnxMlpppEndpointIdClass .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2 |
tmnxBundleMlpppClassCountThe value of tmnxBundleMlpppClassCount specifies whether Multiclass MLPPP is enabled on a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the number of classes to be negotiated/supported over the MLPPP bundle. The value of 0 disables multiclass MLPPP including negotiation in the PPP protocol. All other values specify the number of classes to be supported on a given multiclass bundle and enable Multiclass MLPPP negotiation on that bundle. Non-zero values supported are platform/MDA specific. The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be changed when LFI is enabled on the bundle (see tmnxBundleLFI object in tmnxBundleTable). The value of tmnxBundleMlpppClassCount may be modified only when tmnxBundleNumLinks is zero. To set the value of tmnxBundleMlpppClassCount to a value greater than 4, the long sequence format must be enabled on the bundle (see tmnxBundleShortSequence object in tmnxBundleTable). Changing the value of tmnxBundleMlpppClassCount resets the values of tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their defaultsrw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3 |
tmnxBundleMlpppIngQoSProfIdtmnxBundleMlpppIngQoSProfId specifies ingress QoS profile to be used for the incoming traffic over this MLPPP bundle. The value of tmnxBundleMlpppIngQoSProfId may be modified only when the value of tmnxBundleNumLinks is 0. The value of tmnxBundleMlpppIngQoSProfId of 0 indicates a default QoS profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.rw TMlpppQoSProfileId (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4 |
tmnxBundleMlpppEgrQoSProfIdtmnxBundleMlpppEgrQoSProfId specifies egress QoS profile to be used for the outgoing traffic over this MLPPP bundle. The value of tmnxBundleMlpppEgrQoSProfId may be modified only when tmnxBundleNumLinks is zero. The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates a default profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.rw TMlpppQoSProfileId (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5 |
tmnxDigitalDiagMonitorTableThe tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by TmnxPortID. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components. SEQUENCE OF TmnxDigitalDiagMonitorEntry .1.3.6.1.4.1.6527.3.1.2.2.4.31 |
tmnxDigitalDiagMonitorEntryEach row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system. TmnxDigitalDiagMonitorEntry .1.3.6.1.4.1.6527.3.1.2.2.4.31.1 |
tmnxDDMTemperatureThe value of tmnxDDMTemperature indicates the current temperature of the SFP/XFP in degrees Celsius.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1 |
tmnxDDMTempLowWarningThe value of tmnxDDMTempLowWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2 |
tmnxDDMTempLowAlarmThe value of tmnxDDMTempLowAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3 |
tmnxDDMTempHiWarningThe value of tmnxDDMTempHiWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4 |
tmnxDDMTempHiAlarmThe value of tmnxDDMTempHiAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5 |
tmnxDDMSupplyVoltageThe value of tmnxDDMSupplyVoltage indicates the current supply voltage of the SFP/XFP in micro-Volts (uV).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6 |
tmnxDDMSupplyVoltageLowWarningThe value of tmnxDDMSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7 |
tmnxDDMSupplyVoltageLowAlarmThe value of tmnxDDMSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8 |
tmnxDDMSupplyVoltageHiWarningThe value of tmnxDDMSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9 |
tmnxDDMSupplyVoltageHiAlarmThe value of tmnxDDMSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10 |
tmnxDDMTxBiasCurrentThe value of tmnxDDMTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in micro-Amperes (uA).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11 |
tmnxDDMTxBiasCurrentLowWarningThe value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12 |
tmnxDDMTxBiasCurrentLowAlarmThe value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13 |
tmnxDDMTxBiasCurrentHiWarningThe value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14 |
tmnxDDMTxBiasCurrentHiAlarmThe value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15 |
tmnxDDMTxOutputPowerThe value of tmnxDDMTxOutputPower indicates the current Output Power of the SFP/XFP in micro-Watts (uW).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16 |
tmnxDDMTxOutputPowerLowWarningThe value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17 |
tmnxDDMTxOutputPowerLowAlarmThe value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18 |
tmnxDDMTxOutputPowerHiWarningThe value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19 |
tmnxDDMTxOutputPowerHiAlarmThe value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20 |
tmnxDDMRxOpticalPowerThe value of tmnxDDMRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in micro-Watts (uW).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21 |
tmnxDDMRxOpticalPowerLowWarningThe value of tmnxDDMRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22 |
tmnxDDMRxOpticalPowerLowAlarmThe value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23 |
tmnxDDMRxOpticalPowerHiWarningThe value of tmnxDDMRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24 |
tmnxDDMRxOpticalPowerHiAlarmThe value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25 |
tmnxDDMRxOpticalPowerTypeThe value of tmnxDDMRxOpticalPowerType indicates whether the tmnxDDMRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA).ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26 |
tmnxDDMAux1The value of tmnxDDMAux1 indicates the Manufacturer specific Auxiliary 1 information of the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27 |
tmnxDDMAux1LowWarningThe value of tmnxDDMAux1LowWarning indicates the Manufacturer specific Auxiliary 1 low-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28 |
tmnxDDMAux1LowAlarmThe value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific Auxiliary 1 low-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29 |
tmnxDDMAux1HiWarningThe value of tmnxDDMAux1HiWarning indicates the Manufacturer specific Auxiliary 1 hi-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30 |
tmnxDDMAux1HiAlarmThe value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific Auxiliary 1 hi-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31 |
tmnxDDMAux1TypeThe value of tmnxDDMAux1Type indicates the measurement type of the Manufacturer specific Auxiliary 1 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32 |
tmnxDDMAux2The value of tmnxDDMAux2 indicates the Manufacturer specific Auxiliary 2 information of the SFP/XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33 |
tmnxDDMAux2LowWarningThe value of tmnxDDMAux2LowWarning indicates the Manufacturer specific Auxiliary 2 low-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34 |
tmnxDDMAux2LowAlarmThe value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific Auxiliary 2 low-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35 |
tmnxDDMAux2HiWarningThe value of tmnxDDMAux2HiWarning indicates the Manufacturer specific Auxiliary 2 hi-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36 |
tmnxDDMAux2HiAlarmThe value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific Auxiliary 2 hi-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37 |
tmnxDDMAux2TypeThe value of tmnxDDMAux2Type indicates the measurement type of the Manufacturer specific Auxiliary 2 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38 |
tmnxDDMFailedThresholdsThe value of tmnxDDMFailedThresholds indicates which objects of the monitored SFP/XFP is in a failed or cleared threshold state. A set bit indicates that the specified threshold has been exceeded.ro Bits .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39 |
tmnxDDMExternallyCalibratedThe value of tmnxDDMExternallyCalibrated indicates whether the SFP was externally calibrated (true) or internally calibrated (false).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40 |
tmnxDDMExtCalRxPower4The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41 |
tmnxDDMExtCalRxPower3The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42 |
tmnxDDMExtCalRxPower2The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43 |
tmnxDDMExtCalRxPower1The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44 |
tmnxDDMExtCalRxPower0The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45 |
tmnxDDMExtCalTxLaserBiasSlopeThe value of tmnxDDMExtCalTxLaserBiasSlope indicates the Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46 |
tmnxDDMExtCalTxLaserBiasOffsetThe value of tmnxDDMExtCalTxLaserBiasOffset indicates the Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47 |
tmnxDDMExtCalTxPowerSlopeThe value of tmnxDDMExtCalTxPowerSlope indicates the Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48 |
tmnxDDMExtCalTxPowerOffsetThe value of tmnxDDMExtCalTxPowerOffset indicates the Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49 |
tmnxDDMExtCalTemperatureSlopeThe value of tmnxDDMExtCalTemperatureSlope indicates the T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50 |
tmnxDDMExtCalTemperatureOffsetThe value of tmnxDDMExtCalTemperatureOffset indicates the T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51 |
tmnxDDMExtCalVoltageSlopeThe value of tmnxDDMExtCalVoltageSlope indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52 |
tmnxDDMExtCalVoltageOffsetThe value of tmnxDDMExtCalVoltageOffset indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53 |
tmnxPortNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.7 |
tmnxPortNotifyPortIdUsed by tmnx port Notifications, the OID indicates the port or sonet path associated with the alarm.ro TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.7.1 |
tmnxPortNotifySonetAlarmReasonUsed by tmnx sonet Port Notifications, the value of tmnxPortNotifySonetAlarmReason indicates the reason a sonet port alarm has been raised.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.7.2 |
tmnxPortNotifySonetPathAlarmReasonUsed by tmnx sonet path Notifications, the value of tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path alarm has been raised.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.7.3 |
tmnxPortNotifyErrorUsed by tmnxEqPortError notification, the value of tmnxPortNotifyError indicates the reason a port has an error.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.7.4 |
tmnxPortNotifyDS3AlarmReasonUsed by tmnx DS3 Port Notifications, the value of tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface alarm has been raised.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.7.5 |
tmnxPortNotifyDS1AlarmReasonUsed by tmnx DS1 Port Notifications, the value of tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface alarm has been raised.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.7.6 |
tmnxPortNotifyBundleIdUsed by tmnx bundle Notifications, the value indicates the bundle associated with the alarm.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.7.7 |
tmnxPortNotifyEtherAlarmReasonUsed by tmnx ethernet Port Notifications, the value of tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port alarm has been raised.ro TmnxPortEtherReportValue .1.3.6.1.4.1.6527.3.1.2.2.7.8 |
tmnxDDMFailedObjectUsed by Digital Diagnostic Monitoring (DDM) Notifications, the value of tmnxDDMFailedObject indicates which object of the monitored SFP/XFP is in a failed or cleared threshold state.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.7.9 |
tmnxFRObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.9 |
tmnxFRDlcmiTableThe tmnxFRDlcmiTable has an entry for each port in the system that is configured for Frame Relay. It contains the parameters for the Data Link Connection Management Interface (DLCMI) for the frame relay service on this port. SEQUENCE OF TmnxFRDlcmiEntry .1.3.6.1.4.1.6527.3.1.2.2.9.1 |
tmnxFRDlcmiEntryThe Parameters for a particular Data Link Connection Management Interface. Entries cannot be created and deleted via SNMP SET operations. TmnxFRDlcmiEntry .1.3.6.1.4.1.6527.3.1.2.2.9.1.1 |
tmnxFRDlcmiModetmnxFRDlcmiMode is used to set the mode of the interface. It can be set as Data terminal equipment (dte), Data circuit-terminating equipment (dce) or both as Data terminal equipment and Data circuit-terminating equipment (bidir).rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1 |
tmnxFRDlcmiN392DcetmnxFRDlcmiN392Dce is used to configure the LMI error threshold for DCE interface.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2 |
tmnxFRDlcmiN393DcetmnxFRDlcmiN393Dce is used to configure the LMI monitored event count for DCE interface.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3 |
tmnxFRDlcmiT392DcetmnxFRDlcmiT392Dce is used to configure the polling verification timer for the Frame Relay DCE interface.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4 |
tmnxFRDlcmiTxStatusEnqMsgstmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status Enquiry messages transmitted on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5 |
tmnxFRDlcmiRxStatusEnqMsgstmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status Enquiry messages received on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6 |
tmnxFRDlcmiStatusEnqMsgTimeoutstmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times the LMI agent did not receive a Status Enquiry message within the allotted time.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7 |
tmnxFRDlcmiTxStatusMsgstmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status messages transmitted on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8 |
tmnxFRDlcmiRxStatusMsgstmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status messages received on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9 |
tmnxFRDlcmiStatusMsgTimeoutstmnxFRDlcmiStatusMsgTimeouts indicates the number of times the LMI agent did not receive a Status message within the allotted time.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10 |
tmnxFRDlcmiDiscardedMsgstmnxFRDlcmiDiscardedMsgs indicates the number of times the LMI agent discarded a received message because it wasn't expecting it, the type of message was incorrect, or the contents of the message were invalid.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11 |
tmnxFRDlcmiInvRxSeqNumMsgstmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times the LMI agent received a message with an invalid receive sequence number: i.e. a sequence number that does not match the last transmitted sequence number of the agent.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12 |
tmnxQosAppObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.10 |
tmnxQosPoolAppTableThis table maintains associations of the buffer pools with the individual objects. SEQUENCE OF TmnxQosPoolAppEntry .1.3.6.1.4.1.6527.3.1.2.2.10.2 |
tmnxQosPoolAppEntryThis entry maintains the specifics about the association of a buffer pool and an object. TmnxQosPoolAppEntry .1.3.6.1.4.1.6527.3.1.2.2.10.2.1 |
tmnxObjectTypeThe object tmnxObjectType defines the type of object to which the pool is being setup for. Enumeration .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1 |
tmnxObjectIdtmnxObjectId is used to identify the specific object. If tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the description of TmnxPortID. TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2 |
tmnxObjectAppTypeThe object tmnxObjectAppType specifies the nature of usage the pool would be used for. The pools could be used for access or network traffic at either ingress or egress. Enumeration .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3 |
tmnxObjectAppPooltmnxObjectAppPool specifies the name of the pool to be used/created. TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4 |
tmnxObjectAppPoolRowStatusThe object tmnxObjectAppPoolRowStatus is used to create or remove a pool application to the object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5 |
tmnxObjectAppResvCbsThe percentage of pool size reserved for CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For 'access' application points the value '-1' means a default of 30%.rw Integer32 (-1|0..100) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6 |
tmnxObjectAppSlopePolicytmnxObjectAppSlopePolicy specifies the slope policy being used for this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.rw TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7 |
tmnxObjectAppPoolSizeSize in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighing between all other pools.rw Integer32 (-1|0..100) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8 |
tmnxATMObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.11 |
tmnxATMIntfTableThe tmnxATMIntfTable has an entry for each port/channel in the system that is configured for ATM. It contains ATM cell layer configuration parameters. SEQUENCE OF TmnxATMIntfEntry .1.3.6.1.4.1.6527.3.1.2.2.11.1 |
tmnxATMIntfEntryThe Parameters for a particular ATM Cell Management Interface. Entries cannot be created or deleted via SNMP SET operations. Entries will exist in this table when ATM encapsulation is configured on the port/channel. TmnxATMIntfEntry .1.3.6.1.4.1.6527.3.1.2.2.11.1.1 |
tmnxATMIntfCellFormattmnxATMIntfCellFormat is used to set the cell format (UNI or NNI) that is to be used on the ATM interface.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1 |
tmnxATMIntfMinVpValuetmnxATMIntfMinVpValue is used to set the minimum allowable VPI value that can be used on the ATM interface for a VPC.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2 |
tmnxATMIntfMappingThe value of tmnxATMIntfMapping specifies the cell mapping that is to be used on this ATM interface. When tmnxPortChanType does not have a value of 'pdhDs3 (14)', 'inconsistentValue' error will be returned to SNMP SET requests. When tmnxPortChanType has a value of 'pdhDs3 (14)', tmnxATMIntfMapping can be set to 'plcp (2)'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3 |
tmnxPortStatsObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.12 |
tmnxPortNetIngressStatsTableDefines the Alcatel 7x50 SR series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network ingress traffic. SEQUENCE OF TmnxPortNetIngressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.1 |
tmnxPortNetIngressStatsEntryDefines an entry in tmnxPortNetIngressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port. TmnxPortNetIngressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.1.1 |
tmnxPortNetIngressQueueIndextmnxPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress queue for the specified port in the managed system. TQueueId .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1 |
tmnxPortNetIngressFwdInProfPktstmnxPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2 |
tmnxPortNetIngressFwdOutProfPktstmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3 |
tmnxPortNetIngressFwdInProfOctstmnxPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4 |
tmnxPortNetIngressFwdOutProfOctstmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5 |
tmnxPortNetIngressDroInProfPktstmnxPortNetIngressDroInProfPkts indicates the number of conforming network ingress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6 |
tmnxPortNetIngressDroOutProfPktstmnxPortNetIngressDroOutProfPkts indicates the number of exceeding network ingress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7 |
tmnxPortNetIngressDroInProfOctstmnxPortNetIngressDroInProfOcts indicates the number of conforming network ingress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8 |
tmnxPortNetIngressDroOutProfOctstmnxPortNetIngressDroOutProfOcts indicates the number of exceeding network ingress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9 |
tmnxPortNetEgressStatsTableDefines the Alcatel 7x50 SR series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic. SEQUENCE OF TmnxPortNetEgressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.2 |
tmnxPortNetEgressStatsEntryDefines an entry in tmnxPortNetEgressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port. TmnxPortNetEgressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.2.1 |
tmnxPortNetEgressQueueIndextmnxPortNetEgressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system. TQueueId .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1 |
tmnxPortNetEgressFwdInProfPktstmnxPortNetEgressFwdInProfPkts indicates the number of conforming network egress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2 |
tmnxPortNetEgressFwdOutProfPktstmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding network egress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3 |
tmnxPortNetEgressFwdInProfOctstmnxPortNetEgressFwdInProfOcts indicates the number of conforming network egress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4 |
tmnxPortNetEgressFwdOutProfOctstmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding network egress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5 |
tmnxPortNetEgressDroInProfPktstmnxPortNetEgressDroInProfPkts indicates the number of conforming network egress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6 |
tmnxPortNetEgressDroOutProfPktstmnxPortNetEgressDroOutProfPkts indicates the number of exceeding network egress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7 |
tmnxPortNetEgressDroInProfOctstmnxPortNetEgressDroInProfOcts indicates the number of conforming network egress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8 |
tmnxPortNetEgressDroOutProfOctstmnxPortNetEgressDroOutProfOcts indicates the number of exceeding network egress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9 |
tmnxCiscoHDLCStatsTableThe tmnxCiscoHDLCStatsTable has an entry for each port in the system that is configured for Cisco HDLC encapsulation. It contains Cisco HDLC protocol statistics for the particular port. SEQUENCE OF TmnxCiscoHDLCStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.3 |
tmnxCiscoHDLCStatsEntryAn entry in the tmnxCiscoHDLCStatsTable. TmnxCiscoHDLCStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.3.1 |
tmnxCiscoHDLCDiscardStatInPktstmnxCiscoHDLCDiscardStatInPkts indicates the number of inbound Cisco HDLC packets discarded.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1 |
tmnxCiscoHDLCDiscardStatOutPktstmnxCiscoHDLCDiscardStatOutPkts indicates the number of outbound Cisco HDLC packets discarded.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2 |
tmnxCiscoHDLCStatInPktstmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco HDLC packets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3 |
tmnxCiscoHDLCStatOutPktstmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco HDLC packets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4 |
tmnxCiscoHDLCStatInOctetstmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco HDLC octets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5 |
tmnxCiscoHDLCStatOutOctetstmnxCiscoHDLCStatOutOctets indicates the number of outbound Cisco HDLC octets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6 |
tmnxMcMlpppStatsTableDefines the Alcatel 7x50 SR series Multiclass MLPPP statistics table for providing the capability of retrieving the traffic statistics for the physical queues being used for a class of a multiclass MLPPP bundle to forward the traffic. SEQUENCE OF TmnxMcMlpppStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.4 |
tmnxMcMlpppStatsEntryDefines an entry in tmnxMcMlpppStatsTable. Entries are created and deleted by the system depending on the number of classes being used by a given MLPPP bundle. TmnxMcMlpppStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.4.1 |
tmnxMcMlpppClassIndextmnxMcMlpppClassIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it uniquely identifies a class of a multiclass MLPPP bundle in the managed system. TmnxMcMlpppClassIndex .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1 |
tmnxMcMlpppStatsIngressOctThe value of tmnxMcMlpppStatsIngressOct indicates the total number of octets in all packets received on the bundle for the given class on ingress before reassembly.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2 |
tmnxMcMlpppStatsIngressPktThe value of tmnxMcMlpppStatsIngressPkt indicates the total number of packets forwarded on the bundle for the given class on ingress towards higher layer protocols.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3 |
tmnxMcMlpppStatsIngressErrPktThe value of tmnxMcMlpppStatsIngressErrPkt indicates the total number of packets discarded due to reassembly errors on the bundle for the given class on ingress.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4 |
tmnxMcMlpppStatsEgressOctThe value of tmnxMcMlpppStatsEgressOct indicates the total number of octets in all packets received on the bundle for the given class on egress before segmentation.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5 |
tmnxMcMlpppStatsEgressPktThe value of tmnxMcMlpppStatsEgressPkt indicates the total number of packets forwarded on the bundle for the given class on egress towards the line.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6 |
tmnxMcMlpppStatsEgressErrPktThe value of tmnxMcMlpppStatsEgressErrPkt indicates the total number of packets discarded due to segmentation errors on the bundle for the given class on egress.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7 |
tmnxPortNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.2.2 |
tmnxPortNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.2.2.0 |
tmnxEqOobPortFailureGenerated when the out-of-band Ethernet port has failed. On the Alcatel 7x50 SR system, the out-of-band port is the CPM management interface. This notification was made obsolete in the 2.1 release. The Out-of-band, OOB, port is what id refered to as the management port or cpm port. It has an entry in ifTable and linkup, linkDown and tmnxEqPortError notifications are sent for the management port just as for any other port in the system.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.1 |
tmnxEqPortFailureGenerated when a port has failed. This notification was made obsolete in the 2.1 release. tmnxEqPortError is used instead of tmnxEqPortFailure. Standard IETF linkDown notification is sent when a physical port failure is detected. tmnxEqPortError is sent with a ASCII reason message when port errors are detected. It was originally intended that tmnxEqPortError be used to report errors that do not cause port state change to 'down'. tmnxEqPortFailure was intended to report errors that do cause the port state change to 'down'. However, in the implementation tmnxEqPortError is used for both fatal and non-fatal errors.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.2 |
tmnxQosServiceDegradedGenerated when the port is unable to provided the specified quality of service level.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.3 |
tmnxEqPortSonetAlarmGenerated when a SONET/SDH port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.4 |
tmnxEqPortSonetAlarmClearGenerated when a SONET/SDH port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.5 |
tmnxEqPortSonetPathAlarmGenerated when a SONET/SDH path alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetPathReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.6 |
tmnxEqPortSonetPathAlarmClearGenerated when a SONET/SDH path alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetPathReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.7 |
tmnxEqPortSFPInsertedGenerated when a SFP is inserted in the port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.8 |
tmnxEqPortSFPRemovedGenerated when a SFP is removed from the port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.9 |
tmnxEqPortWrongSFPGenerated when a wrong type of SFP optics module is plugged into a 1 Gig MDA, SONET MDA, or 100FX MDA. Because of the large variety of SFPs now supported and their different encoding schemes for compliance bits, the check for wrong SFP has been removed. As a result, tmnxEqPortWrongSFP notification is no longer generated. However, wrong SFP can be inferred from port statistics.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.10 |
tmnxEqPortSFPCorruptedGenerated when SFP information stored in the EPROM on the SFP is corrupt. This notification was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems; it was replaced by tmnxEqPortSFPStatusFailure.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.11 |
tmnxPortNotifyBerSdTcaGenerated when a SONET/SDH port's signal degradation bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.12 |
tmnxPortNotifyBerSfTcaGenerated when a SONET/SDH port's signal failure bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.13 |
tmnxEqPortErrorGenerated when an error listed in tmnxPortNotifyError is detected on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.14 |
tmnxEqPortDS3AlarmGenerated when a DS3 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS3ChannelReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.15 |
tmnxEqPortDS3AlarmClearGenerated when a DS3 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS3ChannelReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.16 |
tmnxEqPortDS1AlarmGenerated when a DS1 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS1ReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.17 |
tmnxEqPortDS1AlarmClearGenerated when a DS1 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS1ReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.18 |
tmnxEqPortBndlYellowDiffExceededGenerated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleYellowDiffDelay. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.19 |
tmnxEqPortBndlRedDiffExceededGenerated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleRedDiffDelay. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.20 |
tmnxEqPortBndlBadEndPtDiscrGenerated when the port detected mismatched peer endpoint discriminator for the bundle. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.21 |
tmnxEqPortEtherAlarmtmnxEqPortEtherAlarm is generated when a ethernet port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxPortEtherReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.22 |
tmnxEqPortEtherAlarmCleartmnxEqPortEtherAlarmClear is generated when a ethernet port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxPortEtherReportAlarm. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.23 |
tmnxDS1E1LoopbackStartedThe tmnxDS1E1LoopbackStarted notification is generated when a loopback is provisioned on a DS1/E1 port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.24 |
tmnxDS1E1LoopbackStoppedThe tmnxDS1E1LoopbackStopped notification is generated when a loopback is removed on a DS1/E1 port. The value of tmnxSonetLoopback specifies the type of loopback that was configured and has now been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.25 |
tmnxDS3E3LoopbackStartedThe tmnxDS3E3LoopbackStarted notification is generated when a loopback is provisioned on a DS3/E3 port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.26 |
tmnxDS3E3LoopbackStoppedThe tmnxDS3E3LoopbackStopped notification is generated when a loopback is removed on a DS3/E3 port. The value of tmnxDS3ChannelLoopback specifies the type of loopback that was configured and has now been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.27 |
tmnxSonetSDHLoopbackStartedThe tmnxSonetSDHLoopbackStarted notification is generated when a loopback is provisioned on a Sonet-SDH port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.28 |
tmnxSonetSDHLoopbackStoppedThe tmnxSonetSDHLoopbackStopped notification is generated when a loopback test is removed on a Sonet-SDH port. The value of tmnxDS1Loopback specifies the type of loopback that was configured and has now been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.29 |
tmnxEqPortEtherLoopDetectedThe tmnxEqPortEtherLoopDetected notification is genereated when down-when-looped detects an Ethernet port is receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.30 |
tmnxEqPortEtherLoopClearedThe tmnxEqPortEtherLoopCleared notification is generated when down-when-looped detects an Ethernet port has stopped receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to 'false' will also cause this notification to be generated if tmnxEqPortEtherLoopDetected had previously been raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.31 |
tmnxEqPortSpeedCfgNotCompatibleGenerated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured speed on an MDA port is not compatible with the inserted MDA. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.32 |
tmnxEqPortDuplexCfgNotCompatibleGenerated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured duplex on an MDA port is not compatible with the inserted MDA. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.33 |
tmnxEqPortIngressRateCfgNotCompatibleGenerated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured ingress rate on an MDA port is not compatible with the inserted MDA. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.34 |
tmnxEqDigitalDiagMonitorFailureGenerated when an SFP/XFP that supports Digital Diagnostic Monitoring (DDM) enters a failed state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.35 |
tmnxEqPortSFPStatusFailureGenerated when the tmnxPortSFPStatus of an SFP/XFP results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Alcatel 7x50 SR series systems. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.2.2.0.36 |