ALANTEC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ALANTEC-MIB.
324
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
324 total| Object Name |
|---|
alantec OBJECT IDENTIFIER .1.3.6.1.4.1.390 |
RFC1213-MIB Unknown .1.3.6.1.4.1.390 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.390.1 |
powerhub OBJECT IDENTIFIER .1.3.6.1.4.1.390.1.1 |
powerbits OBJECT IDENTIFIER .1.3.6.1.4.1.390.1.2 |
powerhub7000 OBJECT IDENTIFIER .1.3.6.1.4.1.390.1.3 |
alchassis OBJECT IDENTIFIER .1.3.6.1.4.1.390.1.3.1 |
alSlotTableA table that contains information about
each slot in the PowerHub 7000 chassis. SEQUENCE OF AlSlotEntry .1.3.6.1.4.1.390.1.3.1.1 |
alSlotEntryInformation about a specific slot. AlSlotEntry .1.3.6.1.4.1.390.1.3.1.1.1 |
alSlotNumberThe slot number for which the following
information applies.ro INTEGER .1.3.6.1.4.1.390.1.3.1.1.1.1 |
alSlotCardTypeThe card type for this slot.ro Enumeration .1.3.6.1.4.1.390.1.3.1.1.1.2 |
alSlotStatusThe status of the card in this slot.ro Enumeration .1.3.6.1.4.1.390.1.3.1.1.1.3 |
alSlotModelThe model number for this card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.1.3.1.1.1.4 |
alSlotRevisionThe revision number for this card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.1.3.1.1.1.5 |
alSlotIssueThe issue number for this slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.1.3.1.1.1.6 |
alSlotDeviationThe deviation for this slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.1.3.1.1.1.7 |
alSlotSerialNumberThe serial number of this card this slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.1.3.1.1.1.8 |
alSlotPower5The number of milliamps. of current drawn
by this slot at 5 Volts.ro INTEGER .1.3.6.1.4.1.390.1.3.1.1.1.9 |
alSlotPower12The number of milliamps. of current drawn
by this slot at 12 Volts.ro INTEGER .1.3.6.1.4.1.390.1.3.1.1.1.10 |
alSlotPower33The number of milliamps. of current drawn
by this slot at 3.3 Volts.ro INTEGER .1.3.6.1.4.1.390.1.3.1.1.1.11 |
alSlotPowerOtherThe number of milliamps. of current drawn
by this slot at OTHER voltage.ro INTEGER .1.3.6.1.4.1.390.1.3.1.1.1.12 |
alVportTableA table that contains information about
each virtual port in the PowerHub 7000
chassis. SEQUENCE OF AlVportEntry .1.3.6.1.4.1.390.1.3.1.2 |
alVportEntryInformation about a specific virtual port. AlVportEntry .1.3.6.1.4.1.390.1.3.1.2.1 |
alVportNumberThe virtual port number for which the following
information applies.ro INTEGER .1.3.6.1.4.1.390.1.3.1.2.1.1 |
alVportSlotNumberThe slot number for the virtual port number
which is identified by the instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.2.1.2 |
alVportPortNumberThe physical port number on the slot for a
virtual port number which is identified by an
instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.2.1.3 |
alVportPortTypeThe port type for the virtual port which is
identified by the instance of alVportNumber.ro Enumeration .1.3.6.1.4.1.390.1.3.1.2.1.4 |
alVportStatusThe port status for the virtual port which is
identified by the instance of alVportNumber.ro Enumeration .1.3.6.1.4.1.390.1.3.1.2.1.5 |
alVportControllerTypeThe controller type for the virtual port which
is identified by the instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.2.1.6 |
alSlotToVportTableA table that contains information about
each virtual port in the PowerHub 7000
chassis. SEQUENCE OF AlSlotVportEntry .1.3.6.1.4.1.390.1.3.1.3 |
alSlotVportEntryInformation about a specific virtual port. AlSlotVportEntry .1.3.6.1.4.1.390.1.3.1.3.1 |
alSlotVportSlotNumberThe slot number for the virtual port number
which is identified by the instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.3.1.1 |
alSlotVportPortNumberThe physical port number on the slot for a
virtual port number which is identified by an
instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.3.1.2 |
alSlotVportNumberThe virtual port number for which the following
information applies.ro INTEGER .1.3.6.1.4.1.390.1.3.1.3.1.3 |
alSlotVportPortTypeThe port type for the virtual port which is
identified by the instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.3.1.4 |
alSlotVportStatusThe port status for the virtual port which is
identified by the instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.3.1.5 |
alSlotVportControllerTypeThe controller type for the virtual port which
is identified by the instance of alVportNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.3.1.6 |
alPSTableA table that contains information about
each power supply in the PowerHub 7000
chassis. SEQUENCE OF AlPSEntry .1.3.6.1.4.1.390.1.3.1.4 |
alPSEntryInformation about a specific power supply. AlPSEntry .1.3.6.1.4.1.390.1.3.1.4.1 |
alPSNumberThe power supply numberro INTEGER .1.3.6.1.4.1.390.1.3.1.4.1.1 |
alPSStatusThe status of the power supply identified by the
instance of alPSNumber.ro INTEGER .1.3.6.1.4.1.390.1.3.1.4.1.2 |
alCpuSlotThe slot number in which the packet engine
residesro INTEGER .1.3.6.1.4.1.390.1.3.1.5 |
common OBJECT IDENTIFIER .1.3.6.1.4.1.390.2 |
alsystem OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.1 |
alChassisTypeThe model type of the PowerHubro Enumeration .1.3.6.1.4.1.390.2.1.1 |
alMcpuRtVerRuntime software version of the motherboard CPU;
it is an ASCII string that describes the version
as well as the date and time the software was
released from the factory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.2 |
alMcpuPromVerPROM software version of the motherboard CPU;
it is an ASCII string that describes the version
as well as the date and time the software was
released from the factory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.3 |
alFcpuOneRtVerRuntime software version of F-bus CPU for the first
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.4 |
alFcpuTwoRtVerRuntime software version of F-bus CPU for the second
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.5 |
alFcpuOnePromVerPROM software version of F-bus CPU for the first
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.6 |
alFcpuTwoPromVerPROM software version of F-bus CPU for the second
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.7 |
alRcpuOneRtVerRuntime software version of Ring CPU for the first
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.8 |
alRcpuTwoRtVerRuntime software version of Ring CPU for the second
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.9 |
alRcpuOnePromVerPROM software version of Ring CPU for the first
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.10 |
alRcpuTwoPromVerPROM software version of Ring CPU for the second
FDDI board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.1.11 |
albridge OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.2 |
alBridgeTableA table that contains information about
unicast entries for which the bridge has forwarding
and/or filtering information. This information
is used by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF AlBridgeEntry .1.3.6.1.4.1.390.2.2.1 |
alBridgeEntryInformation about a specific unicast MAC
address for which the bridge has some forwarding
and/or filtering information. AlBridgeEntry .1.3.6.1.4.1.390.2.2.1.1 |
alBridgeEntryAddressThe MAC address for which the bridge
has forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.390.2.2.1.1.1 |
alBridgeEntryPortThe port number of the port on which a
frame having a source address equal to the
value of the corresponding instance of
alBridgeEntryAddress has been seen.ro INTEGER .1.3.6.1.4.1.390.2.2.1.1.2 |
alBridgeEntryLinkThe link number on the port on which
a frame having as ource address equal to the
value of the corresponding instance of
alBridgeEntryAddress has been seen. Only applies
to the UTP port type.ro INTEGER .1.3.6.1.4.1.390.2.2.1.1.3 |
alBridgeEntryRuleThe rule number that is applied to
packets that are forwarded to or from this
address.rw INTEGER .1.3.6.1.4.1.390.2.2.1.1.4 |
alBridgeEntryFlagsThe status of this entry.ro INTEGER .1.3.6.1.4.1.390.2.2.1.1.5 |
alBridgeTblClearWhen set, clears the Bridge table.rw INTEGER .1.3.6.1.4.1.390.2.2.2 |
alBrFlushCacheWhen set, flushes the cache.rw INTEGER .1.3.6.1.4.1.390.2.2.3 |
alPortStatsTablePer port statistics SEQUENCE OF PortStatsEntry .1.3.6.1.4.1.390.2.2.4 |
portStatsEntry PortStatsEntry .1.3.6.1.4.1.390.2.2.4.1 |
portStatsPortro INTEGER .1.3.6.1.4.1.390.2.2.4.1.1 |
portStatsPktsInro INTEGER .1.3.6.1.4.1.390.2.2.4.1.2 |
portStatsPktsOutro INTEGER .1.3.6.1.4.1.390.2.2.4.1.3 |
portStatsOctetsInro INTEGER .1.3.6.1.4.1.390.2.2.4.1.4 |
portStatsOctetsOutro INTEGER .1.3.6.1.4.1.390.2.2.4.1.5 |
portStatsMultiCastPktsInro INTEGER .1.3.6.1.4.1.390.2.2.4.1.6 |
portStatsMulticastPktsOutro INTEGER .1.3.6.1.4.1.390.2.2.4.1.7 |
portStatsTableMissesro INTEGER .1.3.6.1.4.1.390.2.2.4.1.8 |
portStatsRcvBuffErrsro INTEGER .1.3.6.1.4.1.390.2.2.4.1.9 |
portStatsXmitBuffErrsro INTEGER .1.3.6.1.4.1.390.2.2.4.1.10 |
portStatsTotalCollisionsro INTEGER .1.3.6.1.4.1.390.2.2.4.1.11 |
portStatsRcvCollisionsro INTEGER .1.3.6.1.4.1.390.2.2.4.1.12 |
portStatsXmitCollisionsro INTEGER .1.3.6.1.4.1.390.2.2.4.1.13 |
portStatsXmitQLenro INTEGER .1.3.6.1.4.1.390.2.2.4.1.14 |
portStatsPeakUtilizationro INTEGER .1.3.6.1.4.1.390.2.2.4.1.15 |
portStatsCurrUtilizationro INTEGER .1.3.6.1.4.1.390.2.2.4.1.16 |
portStatsLossOfCarrierro INTEGER .1.3.6.1.4.1.390.2.2.4.1.17 |
portStatsExcessRetriesro INTEGER .1.3.6.1.4.1.390.2.2.4.1.18 |
alBridgeStatsClearWhen set, clears the statistics for the
bridge.rw INTEGER .1.3.6.1.4.1.390.2.2.5 |
alBridgePPControlWhen set to 0 , disables the port to port
collection of the stats; when set to 1,
enables the port to port stats collection;
when set to 2, clears the port to port
stats.rw Enumeration .1.3.6.1.4.1.390.2.2.6 |
alPortToPortTableStatistics for port to port traffic. SEQUENCE OF PortToPortEntry .1.3.6.1.4.1.390.2.2.7 |
portToPortEntryStatistics for port to port traffic PortToPortEntry .1.3.6.1.4.1.390.2.2.7.1 |
alPPSourecPortSource port numberro INTEGER .1.3.6.1.4.1.390.2.2.7.1.1 |
alPPDestinationPortSource port numberro INTEGER .1.3.6.1.4.1.390.2.2.7.1.2 |
portToPortPacketsro INTEGER .1.3.6.1.4.1.390.2.2.7.1.3 |
portToPortOctetsro INTEGER .1.3.6.1.4.1.390.2.2.7.1.4 |
alPortConfigTablePer port configuration for configuring
Source and Destination Rules etc. SEQUENCE OF PortConfigEntry .1.3.6.1.4.1.390.2.2.8 |
portConfigEntry PortConfigEntry .1.3.6.1.4.1.390.2.2.8.1 |
portConfigPortThe port number for this table entryro INTEGER .1.3.6.1.4.1.390.2.2.8.1.1 |
portConfigSrcRuleSource Rule for the port number identified
by the instance of portConfigPortrw INTEGER .1.3.6.1.4.1.390.2.2.8.1.2 |
portConfigDstRuleDestination Rule for the port number
identified by the instance of portConfigPortrw INTEGER .1.3.6.1.4.1.390.2.2.8.1.3 |
portConfigBlockLearnedEntriesWhen set to True (1), the port identified
by the instance of portConfigPort will block the
learned entries; if set to False (0) the port will
not block the learned entriesrw INTEGER -- CVG, LSI { -- CVG, LSI true(1), false(0) } .1.3.6.1.4.1.390.2.2.8.1.4 |
alBridgeIpBridgingWhen set to enable(1), enables the IP
bridging and if set to disable(0), disables the
IP bridging.rw INTEGER -- CVG, LSI { enable(1), disable(0) } .1.3.6.1.4.1.390.2.2.9 |
alBrTemplateTablePer template information SEQUENCE OF BrTemplateEntry .1.3.6.1.4.1.390.2.2.10 |
brTemplateEntry BrTemplateEntry .1.3.6.1.4.1.390.2.2.10.1 |
brTemplateNumberThe number of the template with which it
is identified.rw INTEGER .1.3.6.1.4.1.390.2.2.10.1.1 |
brTemplateOffsetA displacement, in octets, from the
beginning of the packet. This must be a multiple of
4 in the range from 0 to 124 decimal. A value of -1 will
delete the entryrw INTEGER .1.3.6.1.4.1.390.2.2.10.1.2 |
brTemplateMaskrw Counter -- cvg ?? .1.3.6.1.4.1.390.2.2.10.1.3 |
brTemplateComparatorrw Counter -- cvg ?? .1.3.6.1.4.1.390.2.2.10.1.4 |
brTemplateOptionrw INTEGER -- cvg ?? .1.3.6.1.4.1.390.2.2.10.1.5 |
alBrRuleTablePer rule information SEQUENCE OF BrRuleEntry .1.3.6.1.4.1.390.2.2.11 |
brRuleEntry BrRuleEntry .1.3.6.1.4.1.390.2.2.11.1 |
brRuleNumberThe number of the rule with which it is
identified.rw INTEGER .1.3.6.1.4.1.390.2.2.11.1.1 |
brRuleStatementRule statementrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.2.11.1.2 |
alBrRuleToNodeTable SEQUENCE OF AlBrRuleToNodeEntry .1.3.6.1.4.1.390.2.2.12 |
alBrRuleToNodeEntry AlBrRuleToNodeEntry .1.3.6.1.4.1.390.2.2.12.1 |
brRuleToNodePortThe number of the port for which this
rule appliesrw INTEGER .1.3.6.1.4.1.390.2.2.12.1.1 |
brRuleToNodeMacAddrThe source MAC addressrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.390.2.2.12.1.2 |
brRuleToNodeRuleThe rule number that applies to this
entry.rw INTEGER .1.3.6.1.4.1.390.2.2.12.1.3 |
alBrGroupTable SEQUENCE OF AlBrGroupEntry .1.3.6.1.4.1.390.2.2.13 |
alBrGroupEntry AlBrGroupEntry .1.3.6.1.4.1.390.2.2.13.1 |
brGroupNumberThe group number by which the group is
identified with.rw INTEGER .1.3.6.1.4.1.390.2.2.13.1.1 |
brGroupPortsMaskThe ports associated with the group number
identified by the instance of brGroupNumber.rw INTEGER .1.3.6.1.4.1.390.2.2.13.1.2 |
brGroupNameThe name of the group for which this
entry appliesrw OCTET STRING .1.3.6.1.4.1.390.2.2.13.1.3 |
alBridgeSTPControlWhen set to 0 , disables the spanning tree.
set to 1, enables the spanning tree.rw INTEGER -- CVG, LSI { enable(1), disable(0) } .1.3.6.1.4.1.390.2.2.14 |
alPortStateTablePer port state information about
spanning tree, dignostics and management. SEQUENCE OF PortStateEntry .1.3.6.1.4.1.390.2.2.15 |
portStateEntry PortStateEntry .1.3.6.1.4.1.390.2.2.15.1 |
portStatePortThe port number for this table entryro INTEGER .1.3.6.1.4.1.390.2.2.15.1.1 |
portStateDiagThe diagnostics state of the portro INTEGER -- CVG, LSI { unknown(0), good(1), bad(2) } .1.3.6.1.4.1.390.2.2.15.1.2 |
portStateMgmtThe management state of the portro INTEGER -- CVG, LSI { enabled(1), disabled(0) } .1.3.6.1.4.1.390.2.2.15.1.3 |
portStateStpThe spanning tree state of the port.ro INTEGER .1.3.6.1.4.1.390.2.2.15.1.4 |
portStatePortNameThe name of this portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.2.15.1.5 |
almgmt OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.3 |
alLinkStatsCollectWhen set to enable(1), per link stats
collection is enabled; when set to disable(0),
the per link stats are not collected.rw INTEGER .1.3.6.1.4.1.390.2.3.2 |
alLinkStatsClearWhen set, clears the link statsrw INTEGER .1.3.6.1.4.1.390.2.3.3 |
alLinkStatsTablePer link stats table SEQUENCE OF LinkStatsEntry .1.3.6.1.4.1.390.2.3.4 |
linkStatsEntry LinkStatsEntry .1.3.6.1.4.1.390.2.3.4.1 |
linkStatsPortPort Numberro INTEGER .1.3.6.1.4.1.390.2.3.4.1.1 |
linkStatsLinkLink Numberro INTEGER .1.3.6.1.4.1.390.2.3.4.1.2 |
linkStatsPktsInPkts In - corresponds to piro INTEGER .1.3.6.1.4.1.390.2.3.4.1.3 |
linkStatsOctetsInOctets In - corresponds to oiro INTEGER .1.3.6.1.4.1.390.2.3.4.1.4 |
linkStatsBMCastPktsInBmcast Pks In - corresponds to bpiro INTEGER .1.3.6.1.4.1.390.2.3.4.1.5 |
linkStatsGiantPktsGiant Pkts - corresponds to gpro INTEGER .1.3.6.1.4.1.390.2.3.4.1.6 |
linkStatsFrameErrsFrame Errors - corresponds to faro INTEGER .1.3.6.1.4.1.390.2.3.4.1.7 |
linkStatsFCSErrsFCS Errors corresponds to fcsro INTEGER .1.3.6.1.4.1.390.2.3.4.1.8 |
linkStatsRcvCollisionsReceive Collisions- corresponds to rcro INTEGER .1.3.6.1.4.1.390.2.3.4.1.9 |
alLinkControlTablePer link stats table SEQUENCE OF LinkControlEntry .1.3.6.1.4.1.390.2.3.5 |
linkControlEntry LinkControlEntry .1.3.6.1.4.1.390.2.3.5.1 |
linkControlPortPort number for this entry.ro INTEGER .1.3.6.1.4.1.390.2.3.5.1.1 |
linkControlLinkLink number for this entry.ro INTEGER .1.3.6.1.4.1.390.2.3.5.1.2 |
linkControlEnlStateEnable state for the link corresponds to enl
option in lkd command.ro INTEGER .1.3.6.1.4.1.390.2.3.5.1.3 |
linkControlLinkTestLink test status for the link; corresponds to
lt option of the lkd command.ro INTEGER .1.3.6.1.4.1.390.2.3.5.1.4 |
linkControlPartitionPartitioning state of the linkro INTEGER .1.3.6.1.4.1.390.2.3.5.1.5 |
linkControlPolarityPolarity of the linkro INTEGER .1.3.6.1.4.1.390.2.3.5.1.6 |
linkControlEnableSetting the value of this object to Enable
(1), will enable the link and setting to Disable(2),
will disable the link.rw INTEGER .1.3.6.1.4.1.390.2.3.5.1.7 |
alPortLinkTablePer port link type SEQUENCE OF PortLinkEntry .1.3.6.1.4.1.390.2.3.6 |
portLinkEntry PortLinkEntry .1.3.6.1.4.1.390.2.3.6.1 |
portLinkPortThe port number for which the port type
is to be setro INTEGER .1.3.6.1.4.1.390.2.3.6.1.1 |
portLinkTypeThe type of portrw Enumeration .1.3.6.1.4.1.390.2.3.6.1.2 |
alFiberStatsTablePer port fiber stats and Fiber Security SEQUENCE OF FiberStatsEntry .1.3.6.1.4.1.390.2.3.7 |
fiberStatsEntry FiberStatsEntry .1.3.6.1.4.1.390.2.3.7.1 |
fiberStatsPortThe fiber port for which the stats are
requested or the Fiber violation is setro INTEGER .1.3.6.1.4.1.390.2.3.7.1.1 |
fiberAuiStatusThe fiber aui status for the port that is
specified by the instance of fiberStatsPortro INTEGER .1.3.6.1.4.1.390.2.3.7.1.2 |
fiberSecurityViolationThe fiber port for which the stats are
requested or the Fiber violation is setrw Enumeration .1.3.6.1.4.1.390.2.3.7.1.3 |
alPortMonitorCloseSetting the value to close(1), will
turn the port monitoring off.rw INTEGER .1.3.6.1.4.1.390.2.3.8 |
alPortMonitorTable SEQUENCE OF PortMonitorEntry .1.3.6.1.4.1.390.2.3.9 |
portMonitorEntry PortMonitorEntry .1.3.6.1.4.1.390.2.3.9.1 |
portMonSrcPortThe traffic to/from this port will be monitored
on the portMonDstPortrw INTEGER .1.3.6.1.4.1.390.2.3.9.1.1 |
portMonDstPortThe traffic to/from portMonSrcPort will be
monitored on this portrw INTEGER .1.3.6.1.4.1.390.2.3.9.1.2 |
portMonTrafficTypeSetting this value to 1, will let the port monitor
monitor forwarded traffic; setting to 0 means the
forwarded traffic will not be monitored.rw Enumeration .1.3.6.1.4.1.390.2.3.9.1.3 |
alRebootSetting the value to Reboot(1), will reboot
the PowerHub.rw INTEGER .1.3.6.1.4.1.390.2.3.10 |
alPortMonitorViewTable SEQUENCE OF PortMonitorViewEntry .1.3.6.1.4.1.390.2.3.11 |
portMonitorViewEntry PortMonitorViewEntry .1.3.6.1.4.1.390.2.3.11.1 |
portMonViewSrcPortThe traffic from this port to the port
designated by portMonViewDstPort will be monitored
on portMonViewMonitorPort.ro INTEGER .1.3.6.1.4.1.390.2.3.11.1.1 |
portMonViewDstPortThe traffic to this port from the port
designated by portMonViewSrcPort will be monitored
on portMonViewMonitorPort.ro INTEGER .1.3.6.1.4.1.390.2.3.11.1.2 |
portMonViewMonitorPortThe traffic to portMonViewDstPort from the port
designated by portMonViewSrcPort will be monitored
on portMonViewMonitorPort.rw INTEGER .1.3.6.1.4.1.390.2.3.11.1.3 |
alrip OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.4 |
alRipConfigTablePer port RIP configuration. SEQUENCE OF RipConfigEntry .1.3.6.1.4.1.390.2.4.1 |
ripConfigEntry RipConfigEntry .1.3.6.1.4.1.390.2.4.1.1 |
ripConfigPortPort number for which the RIP parameters
are to be set or viewed.rw INTEGER .1.3.6.1.4.1.390.2.4.1.1.1 |
ripConfigTalkControls whether the hub generates RIP
packets on the port identified by the instance of
ripConfigPort.rw INTEGER -- CVG, LSI { yes (1), no (0) } .1.3.6.1.4.1.390.2.4.1.1.2 |
ripConfigListenControls whether the hub processes RIP
packets received on the port identified by the
instance of ripConfigPort.rw INTEGER -- CVG, LSI { yes (1), no (0) } .1.3.6.1.4.1.390.2.4.1.1.3 |
ripConfigPoisonControls what happens when a route goes down.
If set to no(0), the hub simply stops reporting the
route. If set to yes(1), the hub reports it one more
time, but with a metric value of 16, which infinity
as far as RIP is concerned. Thus other routers learn
immediately that the route is down.rw INTEGER -- CVG, LSI { yes(1), no (0) } .1.3.6.1.4.1.390.2.4.1.1.4 |
ripConfigRptStaticRtWhen RIP packets are generated on the port,
controls whether the hub reports the static routes
in its route table.rw INTEGER -- CVG, LSI { yes (1), no (0) } .1.3.6.1.4.1.390.2.4.1.1.5 |
ripConfigRptDefaultRtWhen RIP packets are generated on the port,
controls whether the hub reports the default routes,
if any, in ints route table.rw INTEGER -- CVG, LSI { yes(1), no (0) } .1.3.6.1.4.1.390.2.4.1.1.6 |
ripConfigAccptDefaultRtWhen RIP packets are received on the port,
controls whether the hub accepts(learns) a default
route that is reported in a RIP packet.rw INTEGER -- CVG, LSI { yes(1), no (0) } .1.3.6.1.4.1.390.2.4.1.1.7 |
alRipstatsClearWhen set, clears the RIP statsrw INTEGER .1.3.6.1.4.1.390.2.4.2 |
alRipStatPktsRcvdPackets Received.ro INTEGER .1.3.6.1.4.1.390.2.4.3 |
alRipStatPktsXmittedPackets Sent.ro INTEGER .1.3.6.1.4.1.390.2.4.4 |
alRipStatReqsRcvdRequests Received.ro INTEGER .1.3.6.1.4.1.390.2.4.5 |
alRipStatRespRcvdResponses Received.ro INTEGER .1.3.6.1.4.1.390.2.4.6 |
alRipStatReqsXmittedRequests Sent.ro INTEGER .1.3.6.1.4.1.390.2.4.7 |
alRipStatRespXmittedResponses Sent.ro INTEGER .1.3.6.1.4.1.390.2.4.8 |
alRipStatRouteTimeOutsRoute Timeouts.ro INTEGER .1.3.6.1.4.1.390.2.4.9 |
alRipStatShortPktsShort packets received.ro INTEGER .1.3.6.1.4.1.390.2.4.10 |
alRipStatBadVerBad version pkts received.ro INTEGER .1.3.6.1.4.1.390.2.4.11 |
alRipStatBadZeroesBad zeroes received.ro INTEGER .1.3.6.1.4.1.390.2.4.12 |
alRipStatBadSrcPortPackets with bad Source port received.ro INTEGER .1.3.6.1.4.1.390.2.4.13 |
alRipStatBadSrcIpPackets with bad source IP address received.ro INTEGER .1.3.6.1.4.1.390.2.4.14 |
alRipStatPktsSelfPackets from self received.ro INTEGER .1.3.6.1.4.1.390.2.4.15 |
alRipStatPktsQueuedPackets queued.ro INTEGER .1.3.6.1.4.1.390.2.4.16 |
alRipStatFreeQueueFree entries in the RIP processing queue.ro INTEGER .1.3.6.1.4.1.390.2.4.17 |
alRipDynPktsRcvdPackets Received.ro INTEGER .1.3.6.1.4.1.390.2.4.18 |
alRipDynPktsXmittedPackets Sent.ro INTEGER .1.3.6.1.4.1.390.2.4.19 |
alRipDynReqsRcvdRequests Received.ro INTEGER .1.3.6.1.4.1.390.2.4.20 |
alRipDynRespRcvdResponses Received.ro INTEGER .1.3.6.1.4.1.390.2.4.21 |
alRipDynReqsXmittedRequests Sent.ro INTEGER .1.3.6.1.4.1.390.2.4.22 |
alRipDynRespXmittedResponses Sent.ro INTEGER .1.3.6.1.4.1.390.2.4.23 |
alRipDynRouteTimeOutsRoute Timeouts.ro INTEGER .1.3.6.1.4.1.390.2.4.24 |
alRipDynShortPktsShort packets received.ro INTEGER .1.3.6.1.4.1.390.2.4.25 |
alRipDynBadVerBad version pkts received.ro INTEGER .1.3.6.1.4.1.390.2.4.26 |
alRipDynBadZeroesBad zeroes received.ro INTEGER .1.3.6.1.4.1.390.2.4.27 |
alRipDynBadSrcPortPackets with bad Source port received.ro INTEGER .1.3.6.1.4.1.390.2.4.28 |
alRipDynBadSrcIpPackets with bad source IP address received.ro INTEGER .1.3.6.1.4.1.390.2.4.29 |
alRipDynPktsSelfPackets from self received.ro INTEGER .1.3.6.1.4.1.390.2.4.30 |
alRipDynPktsQueuedPackets queued.ro INTEGER .1.3.6.1.4.1.390.2.4.31 |
alRipDynFreeQueueFree entries in the RIP processing queue.ro INTEGER .1.3.6.1.4.1.390.2.4.32 |
alRipAccptFilTableRIP Accept filter table SEQUENCE OF RipAccptFilEntry .1.3.6.1.4.1.390.2.4.33 |
ripAccptFilEntryRIP Accept filter entry RipAccptFilEntry .1.3.6.1.4.1.390.2.4.33.1 |
ripAccptFilNumberFilter Number; Range 1-64rw INTEGER .1.3.6.1.4.1.390.2.4.33.1.1 |
ripAccptFilAddrValid network or subnet addressrw IpAddress .1.3.6.1.4.1.390.2.4.33.1.2 |
ripAccptFilMaskMaskrw IpAddress .1.3.6.1.4.1.390.2.4.33.1.3 |
ripAccptFilPortPort number on which network should be
accepted or not. Range 1-14.
CVG This range will change for PH2??rw INTEGER .1.3.6.1.4.1.390.2.4.33.1.4 |
alRipReportFilTableRIP Report filter table SEQUENCE OF RipReportFilEntry .1.3.6.1.4.1.390.2.4.34 |
ripReportFilEntryRIP Report filter entry RipReportFilEntry .1.3.6.1.4.1.390.2.4.34.1 |
ripReportFilNumberFilter Number; Range 1-64rw INTEGER .1.3.6.1.4.1.390.2.4.34.1.1 |
ripReportFilAddrValid network or subnet addressrw IpAddress .1.3.6.1.4.1.390.2.4.34.1.2 |
ripReportFilMaskMaskrw IpAddress .1.3.6.1.4.1.390.2.4.34.1.3 |
ripReportFilPortPort number on which network should be
reported or not. Port number range 1-14
CVG This range will probably change for
PH2??.rw INTEGER .1.3.6.1.4.1.390.2.4.34.1.4 |
altcp OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.5 |
alTcpConnIdleTimeTime in minutes before sending keep-alives.
The range is 5 to 30 minutes.rw INTEGER .1.3.6.1.4.1.390.2.5.1 |
alTcpKeepAliveIntTime interval in seconds between two
successive keep-alive sends. The range is 30 to 240
seconds.rw INTEGER .1.3.6.1.4.1.390.2.5.2 |
alTcpDisconnectIntTime interval in seconds, before an idle
connection is dropped. This equals to the sum of
alTcpConnIdleTime plus eight times the
alTcpKeepAliveInt interval.ro INTEGER .1.3.6.1.4.1.390.2.5.3 |
alTcpShortSegRcvdNumber of short segments received.ro INTEGER .1.3.6.1.4.1.390.2.5.4 |
alTcpStatsClearWhen set to 1, clears the TCP stats.rw INTEGER .1.3.6.1.4.1.390.2.5.5 |
alTcpConnTableA table containing TCP connection-specific
information. SEQUENCE OF AlTcpConnEntry .1.3.6.1.4.1.390.2.5.6 |
alTcpConnEntryInformation about a particular current TCP
connection. An object of this type is transient,
in that it ceases to exist when (or soon after)
the connection makes the transition to the CLOSED
state. AlTcpConnEntry .1.3.6.1.4.1.390.2.5.6.1 |
alTcpConnIdThe connection Identifier by which a
connection is addressed.ro INTEGER .1.3.6.1.4.1.390.2.5.6.1.1 |
alTcpConnStateThe state of this TCP connection.
The only value which may be set by a management
station is deleteTCB(12). Accordingly, it is
appropriate for an agent to return a `badValue'
response if a management station attempts to set
this object to any other value.
If a management station sets this object to the
value deleteTCB(12), then this has the effect of
deleting the TCB (as defined in RFC 793) of the
corresponding connection on the managed node,
resulting in immediate termination of the
connection.rw Enumeration .1.3.6.1.4.1.390.2.5.6.1.2 |
alTcpConnLocalAddressThe local IP address for this TCP connection.
In the case of a connection in the listen state which
is willing to accept connections for any IP
interface associated with the node, the value
0.0.0.0 is used.ro IpAddress .1.3.6.1.4.1.390.2.5.6.1.3 |
alTcpConnLocalPortThe local port number for this TCP connection.ro INTEGER .1.3.6.1.4.1.390.2.5.6.1.4 |
alTcpConnRemAddressThe remote IP address for this TCP connection.ro IpAddress .1.3.6.1.4.1.390.2.5.6.1.5 |
alTcpConnRemPortThe remote port number for this TCP
connection.ro INTEGER .1.3.6.1.4.1.390.2.5.6.1.6 |
alTcpFilTableTCP filter table SEQUENCE OF TcpFilEntry .1.3.6.1.4.1.390.2.5.7 |
tcpFilEntryTCP filter entry TcpFilEntry .1.3.6.1.4.1.390.2.5.7.1 |
tcpFilNumberFilter Number; Range 1-32rw INTEGER .1.3.6.1.4.1.390.2.5.7.1.1 |
tcpFilSrcAddrSource addressrw IpAddress .1.3.6.1.4.1.390.2.5.7.1.2 |
tcpFilSrcMaskMaskrw IpAddress .1.3.6.1.4.1.390.2.5.7.1.3 |
tcpFilProtocoltcp(1) or udp(2)rw INTEGER .1.3.6.1.4.1.390.2.5.7.1.4 |
tcpFilDstPortsmtp(1000), telnet(2000),
ftp(3000) or valid port Numberrw INTEGER .1.3.6.1.4.1.390.2.5.7.1.5 |
alip OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.6 |
alArpTableClearWhen set, clears the ARP table.rw INTEGER .1.3.6.1.4.1.390.2.6.1 |
alArpAgeTimeout in minutes for aging ARP entries;
when set to zero, set-arpage is turned off.rw INTEGER .1.3.6.1.4.1.390.2.6.2 |
alArpStatReqsRcvdRequests Received.ro INTEGER .1.3.6.1.4.1.390.2.6.3 |
alArpStatRepliesRcvdReplies Received.ro INTEGER .1.3.6.1.4.1.390.2.6.4 |
alArpStatInvalidOpcodesInvalid Opcodes Received.ro INTEGER .1.3.6.1.4.1.390.2.6.5 |
alArpStatRequestsSentRequests Sent.ro INTEGER .1.3.6.1.4.1.390.2.6.6 |
alArpStatRepliesSentReplies Sent.ro INTEGER .1.3.6.1.4.1.390.2.6.7 |
alArpDynReqsRcvdRequests Received.ro INTEGER .1.3.6.1.4.1.390.2.6.8 |
alArpDynRepliesRcvdReplies Received.ro INTEGER .1.3.6.1.4.1.390.2.6.9 |
alArpDynInvalidOpcodesInvalid Opcodes Received.ro INTEGER .1.3.6.1.4.1.390.2.6.10 |
alArpDynRequestsSentRequests Sent.ro INTEGER .1.3.6.1.4.1.390.2.6.11 |
alArpDynRepliesSentReplies Sent.ro INTEGER .1.3.6.1.4.1.390.2.6.12 |
alArpProxyTablePer port proxy arp enable/disable SEQUENCE OF ArpProxyEntry .1.3.6.1.4.1.390.2.6.13 |
arpProxyEntry ArpProxyEntry .1.3.6.1.4.1.390.2.6.13.1 |
arpProxyPortPort Numberro INTEGER .1.3.6.1.4.1.390.2.6.13.1.1 |
arpProxyEnableIf set to Enable(1), enables proxy arp
for arp requests received on the port identified by
the instance of arpProxyPort. If set to Disable(0), it
disables the proxy arp for arp requests received on
the ports identified by the instance of arpProxyPort.rw INTEGER .1.3.6.1.4.1.390.2.6.13.1.2 |
alIpTemplateTablePer template information SEQUENCE OF IpTemplateEntry .1.3.6.1.4.1.390.2.6.14 |
ipTemplateEntry IpTemplateEntry .1.3.6.1.4.1.390.2.6.14.1 |
ipTemplateNumberThe number of the template with which it
is identified.rw INTEGER .1.3.6.1.4.1.390.2.6.14.1.1 |
ipTemplateDeleteWhen set to Delete(1), this entry is
deleted.rw INTEGER .1.3.6.1.4.1.390.2.6.14.1.2 |
ipTemplateActionWhether the packet being filtered should
be forwarded or blockedrw Enumeration .1.3.6.1.4.1.390.2.6.14.1.3 |
ipTemplateSrcAddrThe portion of the packet's source address
specified by ipTemplateSrcMask is matched with
this address.rw IpAddress .1.3.6.1.4.1.390.2.6.14.1.4 |
ipTemplateSrcMaskSource Mask. The portion specified by
this mask is matched with source address.rw IpAddress .1.3.6.1.4.1.390.2.6.14.1.5 |
ipTemplateDstAddrThe portion of the packet's destination
address specified by ipTemplateDstMask is matched
with this address.rw IpAddress .1.3.6.1.4.1.390.2.6.14.1.6 |
ipTemplateDstMaskDestination mask. The portion specified by
this mask is matched with destination address.rw IpAddress .1.3.6.1.4.1.390.2.6.14.1.7 |
ipTemplateProtocolDetermines the type of packets that need
to be filteredrw INTEGER .1.3.6.1.4.1.390.2.6.14.1.8 |
ipTemplateOperatorAllowed only if the protocol field is tcp
or udp.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.6.14.1.9 |
ipTemplateDstPortThis is expressed as either a well-known
protocol name or a well-known tcp or udp port
numberrw INTEGER .1.3.6.1.4.1.390.2.6.14.1.10 |
alIpRuleTablePer template information SEQUENCE OF IpRuleEntry .1.3.6.1.4.1.390.2.6.15 |
ipRuleEntry IpRuleEntry .1.3.6.1.4.1.390.2.6.15.1 |
ipRuleNumberThe number of the rule with which it is
identified.rw INTEGER .1.3.6.1.4.1.390.2.6.15.1.1 |
ipRuleDeleteIf set to 1 the entry is deleted.rw INTEGER .1.3.6.1.4.1.390.2.6.15.1.2 |
ipRuleTemplatesThe templates associated with the rule
identified by the instance of ipRuleNumber.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.390.2.6.15.1.3 |
ipAcsCtrlTablePer port IP access control filters SEQUENCE OF IpAcsCtrlEntry .1.3.6.1.4.1.390.2.6.16 |
ipAcsCtrlEntry IpAcsCtrlEntry .1.3.6.1.4.1.390.2.6.16.1 |
ipAcsCtrlPortPort number of the port for which the
source and destination access filter apply.rw INTEGER .1.3.6.1.4.1.390.2.6.16.1.1 |
ipAcsCtrlDeleteIf set to 1, the entry is deleted.rw INTEGER .1.3.6.1.4.1.390.2.6.16.1.2 |
ipAcsCtrlSrcRuleSource IP access filter rulerw INTEGER .1.3.6.1.4.1.390.2.6.16.1.3 |
ipAcsCtrlDstRuleDestination IP access filter rulerw INTEGER .1.3.6.1.4.1.390.2.6.16.1.4 |
ipFilStatStatsTablePer template static statistics
from the beginning of the last system reboot. SEQUENCE OF IpFilStatStatsEntry .1.3.6.1.4.1.390.2.6.17 |
ipFilStatStatsEntry IpFilStatStatsEntry .1.3.6.1.4.1.390.2.6.17.1 |
ipFilStatStatsTemplateThe template number for which
the stats are displayedro INTEGER .1.3.6.1.4.1.390.2.6.17.1.1 |
ipFilStatStatsInPktsThe number of packets that matched
the template identified by the instance of
ipFilStatStatsTemplate. The template has to
be a Source template.ro INTEGER .1.3.6.1.4.1.390.2.6.17.1.2 |
ipFilStatStatsInBytesThe number of bytes that matched
the template identified by the instance of
ipFilStatStatsTemplate. The template has to
be a Source template.ro INTEGER .1.3.6.1.4.1.390.2.6.17.1.3 |
ipFilStatStatsOutPktsThe number of packets that matched
the template identified by the instance of
ipFilStatStatsTemplate. The template has to
be a Destination template.ro INTEGER .1.3.6.1.4.1.390.2.6.17.1.4 |
ipFilStatStatsOutBytesThe number of bytes that matched
the template identified by the instance of
ipFilStatStatsTemplate. The template has to
be a Destination template.ro INTEGER .1.3.6.1.4.1.390.2.6.17.1.5 |
ipFilDynStatsTablePer template dynamic statistics
from the beginning of the last clear. SEQUENCE OF IpFilDynStatsEntry .1.3.6.1.4.1.390.2.6.18 |
ipFilDynStatsEntry IpFilDynStatsEntry .1.3.6.1.4.1.390.2.6.18.1 |
ipFilDynStatsTemplateThe template number for which
the stats are displayedro INTEGER .1.3.6.1.4.1.390.2.6.18.1.1 |
ipFilDynStatsInPktsThe number of packets that matched
the template identified by the instance of
ipFilDynStatsTemplate. The template has to
be a Source template.ro INTEGER .1.3.6.1.4.1.390.2.6.18.1.2 |
ipFilDynStatsInBytesThe number of bytes that matched
the template identified by the instance of
ipFilDynStatsTemplate. The template has to
be a Source template.ro INTEGER .1.3.6.1.4.1.390.2.6.18.1.3 |
ipFilDynStatsOutPktsThe number of packets that matched
the template identified by the instance of
ipFilDynStatsTemplate. The template has to
be a Destination template.ro INTEGER .1.3.6.1.4.1.390.2.6.18.1.4 |
ipFilDynStatsOutBytesThe number of bytes that matched
the template identified by the instance of
ipFilDynStatsTemplate. The template has to
be a Destination template.ro INTEGER .1.3.6.1.4.1.390.2.6.18.1.5 |
ipFilDynStatsClearSetting the value of 1, it will
clear all the stats for the template
identified by the instance of
ipFilDynStatsTemplate.rw INTEGER .1.3.6.1.4.1.390.2.6.18.1.6 |
alIpInterfaceTableInterface table corresponding to the command
- interface-table. SEQUENCE OF AlIpInterfaceEntry .1.3.6.1.4.1.390.2.6.19 |
alIpInterfaceEntry AlIpInterfaceEntry .1.3.6.1.4.1.390.2.6.19.1 |
ipInterfaceNumberrw INTEGER .1.3.6.1.4.1.390.2.6.19.1.1 |
ipInterfaceAddressrw IpAddress .1.3.6.1.4.1.390.2.6.19.1.2 |
ipInterfaceSubnetMaskrw IpAddress .1.3.6.1.4.1.390.2.6.19.1.3 |
ipInterfaceMturw INTEGER .1.3.6.1.4.1.390.2.6.19.1.4 |
ipInterfaceBroadCastrw INTEGER .1.3.6.1.4.1.390.2.6.19.1.5 |
ipInterfaceStaterw INTEGER .1.3.6.1.4.1.390.2.6.19.1.6 |
ipInterfaceCostrw INTEGER .1.3.6.1.4.1.390.2.6.19.1.7 |
ipInterfacePktsInro INTEGER .1.3.6.1.4.1.390.2.6.19.1.8 |
ipInterfaceOctetsInro INTEGER .1.3.6.1.4.1.390.2.6.19.1.9 |
ipInterfacePktsOutro INTEGER .1.3.6.1.4.1.390.2.6.19.1.10 |
ipInterfaceOctetsOutro INTEGER .1.3.6.1.4.1.390.2.6.19.1.11 |
alIpRtCacheTableIP Route Cache for all ports SEQUENCE OF AlIpRtCacheEntry .1.3.6.1.4.1.390.2.6.20 |
alIpRtCacheEntryIP Route cache for each port AlIpRtCacheEntry .1.3.6.1.4.1.390.2.6.20.1 |
ipRtCachePortrw INTEGER .1.3.6.1.4.1.390.2.6.20.1.1 |
ipRtCacheDstAddressrw IpAddress .1.3.6.1.4.1.390.2.6.20.1.2 |
ipRtCacheClearSetting this to Clear(1), will clear the
routecache for the port and Destination address
identified by the instance of ipRtCachePort and
ipRtCacheDstAddress.rw INTEGER .1.3.6.1.4.1.390.2.6.20.1.3 |
alat OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.7 |
aldecnet OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.8 |
alipx OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.9 |
alsnmp OBJECT IDENTIFIER .1.3.6.1.4.1.390.2.10 |