ADVANTECH-EKI-PRONEER-MIB
AI MIB Summary
The ADVANTECH-EKI-PRONEER-MIB provides SNMP-based monitoring and management capabilities for Advantech EKI-PRONEER series industrial Ethernet switches, exposing standard interface statistics, port status states, and system resource metrics. This module enables network administrators to track device health, interface throughput, and error counters within the Advantech industrial networking infrastructure.
The MIB module is for Advantech switch, e.g. EKI-XXXX, etc.
Copyright (C) Advantech iConnectivity Group(2014).
Main OID:
advantech.1.3.6.1.4.1.10297
1333
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
1333 total| Object Name |
|---|
advantechThe MIB module is for Advantech switch,
e.g. EKI-XXXX, etc.
Copyright (C) Advantech iConnectivity Group(2014). MODULE-IDENTITY .1.3.6.1.4.1.10297 |
aSwitchMIB OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202 |
proneer OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000 |
monitoring OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1 |
deviceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.1 |
systemNameSystem name of the switchrw DisplayString .1.3.6.1.4.1.10297.202.7000.1.1.1 |
systemLocationSystem location of the switch.rw DisplayString .1.3.6.1.4.1.10297.202.7000.1.1.2 |
systemContactSystem contact of the switchrw DisplayString .1.3.6.1.4.1.10297.202.7000.1.1.3 |
macAddressMAC address of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.1.4 |
ipAddressIP address of the switch.ro IpAddress .1.3.6.1.4.1.10297.202.7000.1.1.5 |
subnetMaskSubnet mask of the switch.ro IpAddress .1.3.6.1.4.1.10297.202.7000.1.1.6 |
gatewayDefault gateway of the switch.ro IpAddress .1.3.6.1.4.1.10297.202.7000.1.1.7 |
loaderVersionBoot loader version of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.1.8 |
loaderDateBoot loader date of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.1.9 |
firmwareVersionFirmware version of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.1.10 |
firmwareDateFirmware release date of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.1.11 |
systemObjectIDSNMP system object ID of the switch.ro OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.1.12 |
systemUpTimeThe time since the switch was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.10297.202.7000.1.1.13 |
ledStatus OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.1.14 |
ledSYSStatusThe LED status of system operating.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.1 |
ledRMStatusThe LED status of ring master.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.2 |
ledPWR1StatusThe LED status of power input 1.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.3 |
ledPWR2StatusThe LED status of power input 2.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.4 |
ledAlarmStatusThe LED status of alarm.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.5 |
ledPFAILStatusThe LED status of P-Fail.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.6 |
ledRFAILStatusThe LED status of R-Fail.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.7 |
ledLOOPStatusThe LED status of loop detection.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.8 |
ledTempStatusThe LED status of system temperature.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.1.14.9 |
buildVersionBuild version of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.1.15 |
loggingMessage OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.2 |
loggingBufferTableThe table of the logging buffer SEQUENCE OF LoggingBufferedEntry .1.3.6.1.4.1.10297.202.7000.1.2.1 |
loggingBufferEntryThe entry of the logging buffer LoggingBufferedEntry .1.3.6.1.4.1.10297.202.7000.1.2.1.1 |
loggingBufferIndexThe index of the logging buffer Integer32 .1.3.6.1.4.1.10297.202.7000.1.2.1.1.1 |
loggingBufferSeverityThe severity of the logging buffer.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.2.1.1.2 |
loggingBufferCategoryThe category of the logging buffer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.2.1.1.3 |
loggingBufferTimeStampThe time stamp of the logging buffer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.2.1.1.4 |
loggingBufferMessageThe messge of the logging buffer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.2.1.1.5 |
clearBufferedMsgDelete the logging message in buffer.rw Enumeration .1.3.6.1.4.1.10297.202.7000.1.2.2 |
loggingFileTableThe table of the logging file SEQUENCE OF LoggingFileEntry .1.3.6.1.4.1.10297.202.7000.1.2.3 |
loggingFileEntryThe entry of the logging file LoggingFileEntry .1.3.6.1.4.1.10297.202.7000.1.2.3.1 |
loggingFileIndexThe index of the logging file Integer32 .1.3.6.1.4.1.10297.202.7000.1.2.3.1.1 |
loggingFileSeverityThe severity of the logging filero Enumeration .1.3.6.1.4.1.10297.202.7000.1.2.3.1.2 |
loggingFileCategoryThe category of the logging filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.2.3.1.3 |
loggingFileTimeStampThe time stamp of the logging filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.2.3.1.4 |
loggingFileMessageThe message of the logging filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.2.3.1.5 |
clearFileMsgDelete the logging message in file.rw Enumeration .1.3.6.1.4.1.10297.202.7000.1.2.4 |
portMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.3 |
portStatisticTableThe table of the RMON counters. SEQUENCE OF PortStatisticEntry .1.3.6.1.4.1.10297.202.7000.1.3.1 |
portStatisticEntryThe entry of the RMON counters. PortStatisticEntry .1.3.6.1.4.1.10297.202.7000.1.3.1.1 |
portStatisticIndexThe port index of the port counters.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.1 |
portCounterClearClear the port counter.rw Enumeration .1.3.6.1.4.1.10297.202.7000.1.3.1.1.2 |
ifInOctetsThe total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.3 |
ifInUcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.4 |
ifInNUcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifInMulticastPkts and
ifInBroadcastPkts.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.5 |
ifInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTimero Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.6 |
ifOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.7 |
ifOutUcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.8 |
ifOutNUcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifOutMulticastPkts
and ifOutBroadcastPkts.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.9 |
ifOutDiscardsThe number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.10 |
ifInMulticastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.11 |
ifInBroadcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.12 |
ifOutMulticastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.13 |
ifOutBroadcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.14 |
dot3StatsAlignmentErrorsA count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
This counter does not increment for group
encoding schemes greater than 4 bits per group.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsAlignmentErrors object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.15 |
dot3StatsFCSErrorsA count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received with
frame-too-long or frame-too-short error.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
Note: Coding errors detected by the physical
layer for speeds above 10 Mb/s will cause the
frame to fail the FCS check.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFCSErrors object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.16 |
dot3StatsSingleCollisionFramesA count of frames that are involved in a single
collision, and are subsequently transmitted
successfully.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsMultipleCollisionFrames
object.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.17 |
dot3StatsMultipleCollisionFramesA count of frames that are involved in more
than one collision and are subsequently
transmitted successfully.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsSingleCollisionFrames
object.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.18 |
dot3StatsDeferredTransmissionsA count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.19 |
dot3StatsLateCollisionsThe number of times that a collision is
detected on a particular interface later than
one slotTime into the transmission of a packet.
A (late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.20 |
dot3StatsExcessiveCollisionsA count of frames for which transmission on a
particular interface fails due to excessive
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.21 |
dot3StatsFrameTooLongsA count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 80 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFrameTooLongs object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.22 |
dot3StatsSymbolErrorsFor an interface operating at 100 Mb/s, the
number of times there was an invalid data symbol
when a valid carrier was present.
For an interface operating in half-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than slotTime, and
during which there was at least one occurrence
of an event that causes the PHY to indicate
'Data reception error' or 'carrier extend error'
on the GMII.
For an interface operating in full-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than minFrameSize,
and during which there was at least one
occurrence of an event that causes the PHY to
indicate 'Data reception error' on the GMII.
For an interface operating at 10 Gb/s, the
number of times the receiving media is non-idle
(a carrier event) for a period of time equal to
or greater than minFrameSize, and during which
there was at least one occurrence of an event
that causes the PHY to indicate 'Receive Error'
on the XGMII.
The count represented by an instance of this
object is incremented at most once per carrier
event, even if multiple symbol errors occur
during the carrier event. This count does
not increment if a collision is present.
This counter does not increment when the
interface is operating at 10 Mb/s.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsSymbolErrors object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.23 |
dot3ControlInUnknownOpcodesA count of MAC Control frames received on this
interface that contain an opcode that is not
supported by this device.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCControlInUnknownOpcodes object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.24 |
dot3InPauseFramesA count of MAC Control frames received on this
interface with an opcode indicating the PAUSE
operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCInPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.25 |
dot3OutPauseFramesA count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCOutPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.3.1.1.26 |
linkAggregation OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.4 |
lagStatusTableThe table of the link aggregation group SEQUENCE OF LagStatusEntry .1.3.6.1.4.1.10297.202.7000.1.4.1 |
lagStatusEntryThe entry of the link aggregation group LagStatusEntry .1.3.6.1.4.1.10297.202.7000.1.4.1.1 |
lagStatusIndexThe name of the link aggregation groupro Integer32 .1.3.6.1.4.1.10297.202.7000.1.4.1.1.1 |
lagStatusNameThe LAG port descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.1.1.2 |
lagStatusTypeThe type of the LAG.
Static: The group of ports assigned to a static LAG
are always active members.
LACP: The group of ports assigned to dynamic LAG
are candidate ports. LACP determines which candidate
ports are active member ports.ro Enumeration .1.3.6.1.4.1.10297.202.7000.1.4.1.1.3 |
lagStatusLinkStateLAG port link statusro Enumeration .1.3.6.1.4.1.10297.202.7000.1.4.1.1.4 |
lagStatusActiveMemberActive member ports of the LAGro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.1.1.5 |
lagStatusStandbyMemberInactive or candudate member ports of the LAGro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.1.1.6 |
lacpInfoTableThe table of LACP SEQUENCE OF LacpInfoEntry .1.3.6.1.4.1.10297.202.7000.1.4.2 |
lacpInfoEntryThe entry of LACP LacpInfoEntry .1.3.6.1.4.1.10297.202.7000.1.4.2.1 |
lacpInfoLagIndexThe LACP namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.1 |
lacpInfoPortIndexMember port namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.2 |
lacpInfoPartnerSysIdThe system ID of link partner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.3 |
lacpInfoPnkeyPort key of partnerro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.4 |
lacpInfoAtkeyPort key of actorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.5 |
lacpInfoSelLACP selection logic status of the portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.6 |
lacpInfoMuxLACP mux state machine status of the portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.7 |
lacpInfoReceivLACP receive state machine status of the portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.8 |
lacpInfoPrdtxLACP periodic transmission state machine status of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.9 |
lacpInfoAtstatThe actor state field of LACP PDU description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.10 |
lacpInfoPnstatThe partner state field of LACP PDU description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.1.4.2.1.11 |
lldpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.5 |
lldpClearStatisticsClear the LLDP statisticsrw Enumeration .1.3.6.1.4.1.10297.202.7000.1.5.1 |
inertionsThe number of times the complete set of infomation
advertised by a partcular MAC Service Access Point(MSAP)
has been inserted into tables associated with the remote
systemsro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.2 |
deletionsThe number of times the complete set of infomation
advertised by MSAP has been deleted from tables associated
with the remote systemsro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.3 |
dropsThe number of times the complete set of information
advertised by MSAP could not be entered into tables
associated with the remote systems because of insufficient
resources.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.4 |
ageoutsThe number of times the complete set of information
advertised by MSAP has been deleted from tables associated
with the remote systems because the information timeliness
interval has expired.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.5 |
lldpPortStatisticsTableThe table of LLDP port statistics SEQUENCE OF LLDPPortStatisticsEntry .1.3.6.1.4.1.10297.202.7000.1.5.6 |
lldpPortStatisticsEntryThe entry of LLDP port statistics LLDPPortStatisticsEntry .1.3.6.1.4.1.10297.202.7000.1.5.6.1 |
lldpPortStatIndexInterface or port number.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.1 |
lldpPortStatTotalTxFrameNumber of LLDP frames transmitted on the corresponding
port.ro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.2 |
lldpPortStatTotalRxFrameNumber of LLDP frames received by this LLDP agent on the
corresponding port, while the LLDP agent is enabledro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.3 |
lldpPortStatDiscardRxFrameNumber of LLDP frames discard for any reason by this LLDP
agent on the corresponding portro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.4 |
lldpPortStatErrorRxFrameNumber of invalid LLDP frames received by the LLDP agent
on the corresponding port, while the LLDP agent is enabledro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.5 |
lldpPortStatDiscardRxTlvNumber of TLVs LLDP frames discard for any reason by
this LLDP agent on the corresponding portro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.6 |
lldpPortStatUnrecognizedRxTlvNumber of TLVs LLDP frames that are unrecognized while
this LLDP agent is enabledro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.7 |
lldpPortStatTotalRxAgeoutsNumber of age out LLDP framesro Integer32 .1.3.6.1.4.1.10297.202.7000.1.5.6.1.8 |
igmpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.6 |
totalRxIGMP snooping total Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.1 |
validRxIGMP snooping valid Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.2 |
invalidRxIGMP snooping invalid Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.3 |
otherRxIGMP snooping other Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.4 |
leaveRxIGMP snooping leave Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.5 |
reportRxIGMP snooping report Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.6 |
generalQueryRxIGMP snooping general query Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.7 |
specialGroupQueryRxIGMP snooping special group query Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.8 |
specialGroupSourceQueryRxIGMP snooping special group source query Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.9 |
leaveTxIGMP snooping leave Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.10 |
reportTxIGMP snooping report Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.11 |
generalQueryTxIGMP snooping general query Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.12 |
specialGroupQueryTxIGMP snooping special group query Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.13 |
specialGroupSourceQueryTxIGMP snooping special group source query Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.6.14 |
clearigmpStatisticsClear IGMP snooping statistics counterrw Enumeration .1.3.6.1.4.1.10297.202.7000.1.6.15 |
mldStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.1.7 |
mldtotalRxMLD total Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.1 |
mldvalidRxMLD valid Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.2 |
mldinvalidRxMLD invalid Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.3 |
mldotherRxMLD other Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.4 |
mldleaveRxMLD leave Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.5 |
mldreportRxMLD report Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.6 |
mldgeneralQueryRxMLD general query Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.7 |
mldspecialGroupQueryRxMLD special group query Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.8 |
mldspecialGroupSourceQueryRxMLD special group source query Rx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.9 |
mldleaveTxMLD leave Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.10 |
mldreportTxMLD report Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.11 |
mldgeneralQueryTxMLD general query Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.12 |
mldspecialGroupQueryTxMLD special group query Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.13 |
mldspecialGroupSourceQueryTxMLD special group source query Tx counterro Integer32 .1.3.6.1.4.1.10297.202.7000.1.7.14 |
clearmldStatisticsClear MLD statistics counterrw Enumeration .1.3.6.1.4.1.10297.202.7000.1.7.15 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2 |
ipSettings OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.1 |
ipv4Modethe mode of network connection
Static: Enable static IP address.
DHCP: Enable DHCP to obtain IP information from a
DHCP server on the network.rw Enumeration .1.3.6.1.4.1.10297.202.7000.2.1.1 |
ipv4AddressIf static mode is enabled, enter IP address in this field.rw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.2 |
ipv4SubnetMaskIf static mode is enabled, enter subnet mask in this field.rw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.3 |
ipv4GatewayIf static mode is enabled, enter gateway address in this field.rw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.4 |
ipv4DnsServer1If static mode is enabled, enter primary DNS server address
in this fieldrw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.5 |
ipv4DnsServer2If static mode is enabled, enter secondary DNS server address
in this fieldrw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.6 |
interfaceIpv4TableThe table of interface IP address SEQUENCE OF InterfaceIpv4Entry .1.3.6.1.4.1.10297.202.7000.2.1.7 |
interfaceIpv4EntryThe entry of interface IP address InterfaceIpv4Entry .1.3.6.1.4.1.10297.202.7000.2.1.7.1 |
interfaceIpv4IndexThe index of interface IPv4 tablero Integer32 .1.3.6.1.4.1.10297.202.7000.2.1.7.1.1 |
interfaceIpv4VlanThe VLAN ID of interface IPv4 tablero Integer32 .1.3.6.1.4.1.10297.202.7000.2.1.7.1.2 |
interfaceIpv4Modethe mode of network connection
Static: Enable static IP address.
DHCP: Enable DHCP to obtain IP information from a
DHCP server on the network.rw Enumeration .1.3.6.1.4.1.10297.202.7000.2.1.7.1.3 |
interfaceIpv4AddressIf static mode is enabled, enter IP address in this field.rw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.7.1.4 |
interfaceIpv4SubnetMaskIf static mode is enabled, enter subnet mask in this field.rw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.7.1.5 |
interfaceIpv4GatewayIf static mode is enabled, enter gateway address in this field.rw IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.7.1.6 |
interCurrIpv4DhcpStateThe current status of IPv4 DHCP.ro Enumeration .1.3.6.1.4.1.10297.202.7000.2.1.7.1.7 |
interCurrIpv4AddressThe current IPv4 addressro IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.7.1.8 |
interCurrIpv4SubnetMaskThe current IPv4 subnet maskro IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.7.1.9 |
interCurrIpv4GatewayThe current IPv4 gateway.ro IpAddress .1.3.6.1.4.1.10297.202.7000.2.1.7.1.10 |
ipv6Settings OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.2 |
autoConfigurationIPv6 Auto Configuration state.rw Enumeration .1.3.6.1.4.1.10297.202.7000.2.2.1 |
ipv6AddressIf auto configuration mode is disabled, enter IPv6 address in
this field.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.2.2 |
ipv6SubnetMaskIf auto configuration mode is disabled, enter IPv6 submask in
this field.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.2.3 |
ipv6GatewayIf auto configuration mode is disabled, enter IPv6 gateway
address in this field.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.2.4 |
dhcpv6ClientDHCPv6 client staterw Enumeration .1.3.6.1.4.1.10297.202.7000.2.2.5 |
ipv6InUseTableThe table of in-use IPv6 address SEQUENCE OF IPv6InUseEntry .1.3.6.1.4.1.10297.202.7000.2.2.6 |
ipv6InUseEntryThe entry of in-use IPv6 address IPv6InUseEntry .1.3.6.1.4.1.10297.202.7000.2.2.6.1 |
ipv6InUseIndexThe current use IPv6 submaskro Integer32 .1.3.6.1.4.1.10297.202.7000.2.2.6.1.1 |
ipv6InUseAddressThe current use IPv6 addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.2.6.1.2 |
ipv6InUseSubnetMaskThe current use IPv6 submaskro Integer32 .1.3.6.1.4.1.10297.202.7000.2.2.6.1.3 |
ipv6InUseRouterThe current use IPv6 router addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.2.7 |
dhcpv6DUIDThe DHCPv6 DUIDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.2.8 |
dhcpv6IPAddressThe DHCPv6 IP addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.2.9 |
managementVlanThis allows the entry of a VLAN from which a management station
will be allowed to manage the device using TCP/IP (in-band via
web manager or Telnet). Management stations that are on VLANs
other than the one seleted here will not be able to manage the
Switch. The default management VLAN is VLAN 1.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.3 |
systemTime OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4 |
systemTimeSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.1 |
enableSNTPenable or disable using SNTP server.rw Enumeration .1.3.6.1.4.1.10297.202.7000.2.4.1.1 |
manualTime OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.1.2 |
yearThe year of the switchrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.2.1 |
monthThe month of the switchrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.2.2 |
dayThe day of the switchrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.2.3 |
hoursThe hour of the switchrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.2.4 |
minutesThe minutes of the switchrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.2.5 |
secondsThe second of the switchrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.2.6 |
timeZoneThe UTC Timezone of the switch.rw Enumeration .1.3.6.1.4.1.10297.202.7000.2.4.1.3 |
daylightSavingthe mode of daylight saving time.
Disable: Disable daylight saving time.
Recurring: Using recurring mode of daylight saving time
Non-Recurring: Using non-recurring mode of daylight saving time
USA: Using daylight saving time in the United States that
starts on the second Sunday of March and ends on the first
Sunday of November
European: daylight saving time in the Europe that
starts on the last Sunday of March and ends on the last
Sunday of Novemberrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.4.1.4 |
daylightSavingOffsetSpecify the adjust offset of daylight saving timerw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.5 |
recurringFrom OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.1.6 |
recFromDayThe starting day of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.6.1 |
recFromWeekThe starting week of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.6.2 |
recFromMonthThe starting month of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.6.3 |
recFromHoursThe starting hour of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.6.4 |
recFromMinutesThe starting minutes of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.6.5 |
recurringTo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.1.7 |
recToDayThe ending day of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.7.1 |
recToWeekThe ending week of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.7.2 |
recToMonthThe ending month of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.7.3 |
recToHoursThe ending hour of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.7.4 |
recToMinutesThe ending minute of recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.7.5 |
nonRecurringFrom OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.1.8 |
nonRecFromYearThe starting year of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.8.1 |
nonRecFromMonthThe starting month of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.8.2 |
nonRecFromDayThe starting day of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.8.3 |
nonRecFromHoursThe starting hour of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.8.4 |
nonRecFromMinutesThe starting minute of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.8.5 |
nonRecurringTo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.1.9 |
nonRecToYearThe ending year of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.9.1 |
nonRecToMonthThe ending month of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.9.2 |
nonRecToDayThe ending day of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.9.3 |
nonRecToHoursThe ending hour of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.9.4 |
nonRecToMinutesThe ending minute of non-recurring daylight saving time.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.9.5 |
serverAddressIP address or hostname of time serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.1.10 |
serverPortTime server port numberrw Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.1.11 |
systemTimeStatusIf user set system time with SNMP, the value sould not apply to
switch. They need to set active(1) to apply into switchrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.4.1.12 |
systemTimeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.4.2 |
currentDateTimeCurrent Date and Time on the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.1 |
currentSNTPThe status of SNTP server.ro Enumeration .1.3.6.1.4.1.10297.202.7000.2.4.2.2 |
currentSNTPServerAddrThe IP address or hostname of SNTP server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.3 |
currentSNTPServerPortThe port number of SNTP server.ro Integer32 .1.3.6.1.4.1.10297.202.7000.2.4.2.4 |
currentTimeZonero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.5 |
currentDaylightSavingStatusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.6 |
currentDaylightSavingOffsetro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.7 |
currentDaylightSavingFromro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.8 |
currentDaylightSavingToro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.4.2.9 |
sfp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.5 |
sfpSerialInfoTableThe table of SFP serial info. SEQUENCE OF SFPSerialInfoEntry .1.3.6.1.4.1.10297.202.7000.2.5.1 |
sfpSerialInfoEntryThe entry of SFP serial info. SFPSerialInfoEntry .1.3.6.1.4.1.10297.202.7000.2.5.1.1 |
sfpPortIndexThe index of SFP serial info.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.1 |
sfpConnectorThe SFP connectorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.2 |
sfpSpeedThe SFP speedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.3 |
sfpVendorNameThe SFP vender namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.4 |
sfpVendorPnThe SFP vendor product numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.6 |
spfVendorRevThe SFP vender revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.7 |
sfpVendorSnThe SFP vendor serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.8 |
sfpDateCodeThe SFP data codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.1.1.9 |
sfpDMIInfoTableThe table of SFP DMI info. SEQUENCE OF SFPDMIInfoEntry .1.3.6.1.4.1.10297.202.7000.2.5.2 |
sfpDMIInfoEntryThe entry of SFP DMI info. SFPDMIInfoEntry .1.3.6.1.4.1.10297.202.7000.2.5.2.1 |
sfpDMIPortIndexThe index of SFP DMI info.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.2.1.1 |
sfpDMITemperatureThe SFP DMI temperaturero DisplayString UNITS "C" .1.3.6.1.4.1.10297.202.7000.2.5.2.1.2 |
sfpDMIVoltageThe SFP DMI voltagero DisplayString UNITS "V" .1.3.6.1.4.1.10297.202.7000.2.5.2.1.3 |
sfpDMITxBiasThe SFP DMI Tx biasro DisplayString UNITS "mA" .1.3.6.1.4.1.10297.202.7000.2.5.2.1.4 |
sfpDMITxPowerThe SFP DMI Tx powerro DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.2.1.5 |
sfpDMIRxPowerThe SFP DMI Rx powerro DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.2.1.6 |
ddmDiagnosticAlarmThe DDM diagnostic alarm settingrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.3 |
sfpDMIAlarmInfoTableThe table of SFP DMI alarm info. SEQUENCE OF SFPDMIAlarmInfoEntry .1.3.6.1.4.1.10297.202.7000.2.5.4 |
sfpDMIAlarmInfoEntryThe entry of SFP DMI alarm info. SFPDMIAlarmInfoEntry .1.3.6.1.4.1.10297.202.7000.2.5.4.1 |
sfpDMIAlarmPortIndexThe index of SFP DMI alarm info.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.5.4.1.1 |
sfpDMITempHighAlarmStateThe state of SFP DMI temperature high alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.2 |
sfpDMITempHighAlarmValueThe value of SFP DMI temperature high alarm.
The value range is 127 Degrees C ~ -127 Degrees Crw DisplayString UNITS "C" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.3 |
sfpDMITempHighWarnStateThe state of SFP DMI temperature high warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.4 |
sfpDMITempHighWarnValueThe value of SFP DMI temperature high warning.
The value range is 127 Degrees C ~ -127 Degrees Crw DisplayString UNITS "C" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.5 |
sfpDMITempLowAlarmStateThe state of SFP DMI temperature low alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.6 |
sfpDMITempLowAlarmValueThe value of SFP DMI temperature low alarm.
The value range is 127 Degrees C ~ -127 Degrees Crw DisplayString UNITS "C" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.7 |
sfpDMITempLowWarnStateThe state of SFP DMI temperature low warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.8 |
sfpDMITempLowWarnValueThe value of SFP DMI temperature low warning.
The value range is 127 Degrees C ~ -127 Degrees Crw DisplayString UNITS "C" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.9 |
sfpDMIVoltageHighAlarmStateThe state of SFP DMI voltage high alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.10 |
sfpDMIVoltageHighAlarmValueThe value of SFP DMI voltage high alarm.
The value range is 0.001~6Vrw DisplayString UNITS "V" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.11 |
sfpDMIVoltageHighWarnStateThe state of SFP DMI voltage high warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.12 |
sfpDMIVoltageHighWarnValueThe value of SFP DMI voltage high warning.
The value range is 0.001~6Vrw DisplayString UNITS "V" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.13 |
sfpDMIVoltageLowAlarmStateThe state of SFP DMI voltage low alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.14 |
sfpDMIVoltageLowAlarmValueThe value of SFP DMI voltage low alarm.
The value range is 0.001~6Vrw DisplayString UNITS "V" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.15 |
sfpDMIVoltageLowWarnStateThe state of SFP DMI voltage low warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.16 |
sfpDMIVoltageLowWarnValueThe value of SFP DMI voltage low warning.
The value range is 0.001~6Vrw DisplayString UNITS "V" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.17 |
sfpDMITxBasisHighAlarmStateThe state of SFP DMI TX Basis high alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.18 |
sfpDMITxBasisHighAlarmValueThe value of SFP DMI TX Basis high alarm.
The value range is 1~131mArw DisplayString UNITS "mA" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.19 |
sfpDMITxBasisHighWarnStateThe state of SFP DMI TX Basis high warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.20 |
sfpDMITxBasisHighWarnValueThe value of SFP DMI TX Basis high warning.
The value range is 1~131mArw DisplayString UNITS "mA" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.21 |
sfpDMITxBasisLowAlarmStateThe state of SFP DMI TX Basis low alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.22 |
sfpDMITxBasisLowAlarmValueThe value of SFP DMI TX Basis low alarm.
The value range is 1~131mArw DisplayString UNITS "mA" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.23 |
sfpDMITxBasisLowWarnStateThe state of SFP DMI TX Basis low warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.24 |
sfpDMITxBasisLowWarnValueThe value of SFP DMI TX Basis low warning.
The value range is 1~131mArw DisplayString UNITS "mA" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.25 |
sfpDMITxPowerHighAlarmStateThe state of SFP DMI TX power high alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.26 |
sfpDMITxPowerHighAlarmValueThe value of SFP DMI TX power high alarm.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.27 |
sfpDMITxPowerHighWarnStateThe state of SFP DMI TX power high warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.28 |
sfpDMITxPowerHighWarnValueThe value of SFP DMI TX power high warning.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.29 |
sfpDMITxPowerLowAlarmStateThe state of SFP DMI TX power low alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.30 |
sfpDMITxPowerLowAlarmValueThe value of SFP DMI TX power low alarm.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.31 |
sfpDMITxPowerLowWarnStateThe state of SFP DMI TX power low warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.32 |
sfpDMITxPowerLowWarnValueThe value of SFP DMI TX power low warning.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.33 |
sfpDMIRxPowerHighAlarmStateThe state of SFP DMI RX power high alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.34 |
sfpDMIRxPowerHighAlarmValueThe value of SFP DMI RX power high alarm.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.35 |
sfpDMIRxPowerHighWarnStateThe state of SFP DMI RX power high warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.36 |
sfpDMIRxPowerHighWarnValueThe value of SFP DMI RX power high warning.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.37 |
sfpDMIRxPowerLowAlarmStateThe state of SFP DMI RX power low alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.38 |
sfpDMIRxPowerLowAlarmValueThe value of SFP DMI RX power low alarm.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.39 |
sfpDMIRxPowerLowWarnStateThe state of SFP DMI RX power low warningrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.5.4.1.40 |
sfpDMIRxPowerLowWarnValueThe value of SFP DMI RX power low warning.
The value range is 8~-39dbmrw DisplayString UNITS "dbm" .1.3.6.1.4.1.10297.202.7000.2.5.4.1.41 |
dhcpClientOpt82 OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.6 |
dhcpClientOpt82Statusrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.6.1 |
dhcpClientOpt82CircuitIDFormatrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.6.2 |
dhcpClientOpt82CircuitIDStringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.6.3 |
dhcpClientOpt82CircuitIDHexrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.6.4 |
dhcpClientOpt82CircuitIDUserDefinerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.6.5 |
dhcpClientOpt82RemoteIDFormatrw Enumeration .1.3.6.1.4.1.10297.202.7000.2.6.6 |
dhcpClientOpt82RemoteIDStringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.6.7 |
dhcpClientOpt82RemoteIDHexrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.6.8 |
dhcpClientOpt82RemoteIDUserDefinerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.2.6.9 |
networkPort OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.2.7 |
httpNetworkPortThe network port of http.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.7.1 |
httpsNetworkPortThe network port of https.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.7.2 |
telnetNetworkPortThe network port of telnet.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.7.3 |
sshNetworkPortThe network port of ssh.rw Integer32 .1.3.6.1.4.1.10297.202.7000.2.7.4 |
l2switching OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3 |
portSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.1 |
portSettingTableThe table of port setting. SEQUENCE OF PortSettingEntry .1.3.6.1.4.1.10297.202.7000.3.1.1 |
portSettingEntryThe entry of port setting. PortSettingEntry .1.3.6.1.4.1.10297.202.7000.3.1.1.1 |
portSettingIndexThe index of port setting.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.1.1.1.1 |
descriptionPort descriptionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.1.1.1.2 |
enableStatePort admin staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.1.1.1.3 |
linkStatusPort link statusro Enumeration .1.3.6.1.4.1.10297.202.7000.3.1.1.1.4 |
speedPort speed capabilitiesrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.1.1.1.5 |
duplexPort duplex capabilitiesrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.1.1.1.6 |
flowControlConfigPort flow control settingrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.1.1.1.7 |
flowControlStatusPort flow control statusro Enumeration .1.3.6.1.4.1.10297.202.7000.3.1.1.1.8 |
mirror OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.2 |
mirrorTableThe table of mirror funciton SEQUENCE OF MirrorEntry .1.3.6.1.4.1.10297.202.7000.3.2.1 |
mirrorEntryThe entry of mirror funciton MirrorEntry .1.3.6.1.4.1.10297.202.7000.3.2.1.1 |
sessionIdMirror session IDro Integer32 .1.3.6.1.4.1.10297.202.7000.3.2.1.1.1 |
monitorSessionStateMirror session staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.2.1.1.2 |
destinationPortMirror session destination portrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.2.1.1.3 |
ingressStateDestination port ingress staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.2.1.1.4 |
sourceTxPortMirror session source tx ports only select portbased-enabled
state.rw Bits .1.3.6.1.4.1.10297.202.7000.3.2.1.1.5 |
sourceRxPortMirror session source rx ports only select portbased-enabled
staterw Bits .1.3.6.1.4.1.10297.202.7000.3.2.1.1.6 |
lag OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.3 |
loadBalanceAlgorithmLAG load balance distribution algorithm.
MAC Address: Based on source and destination MAC
address for all packets
IP/MAC Address: Based on source and destination
IP addresses for IP packet, and source and destination
MAC address for non-IP packets.
Source Port: Based on Source Port for all packets.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.1 |
lagManagementTableThe table of LAG management SEQUENCE OF LagManagementEntry .1.3.6.1.4.1.10297.202.7000.3.3.2 |
lagManagementEntryThe entry of LAG management LagManagementEntry .1.3.6.1.4.1.10297.202.7000.3.3.2.1 |
lagIndexThe index of LAG managementro Integer32 .1.3.6.1.4.1.10297.202.7000.3.3.2.1.1 |
lagNameLAG port namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.3.2.1.2 |
lagTypethe type of the LAG
Static: The group of ports assigned to a static LAG
are always active members.
LACP: The group of ports assigned to dynamic LAG
are candidate ports. LACP determines which candidate
ports are active member ports.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.2.1.3 |
lagPortsthe trunk member ports in this fieldrw Bits .1.3.6.1.4.1.10297.202.7000.3.3.2.1.4 |
lagLinkStateLAG port link statusro Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.2.1.5 |
lagActiveMemberActive member ports of the LAGro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.3.2.1.6 |
lagStandbyMemberInactive or candidate member ports of the LAGro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.3.2.1.7 |
lagPortTableThe table of LAG port SEQUENCE OF LagPortEntry .1.3.6.1.4.1.10297.202.7000.3.3.3 |
lagPortEntryThe entry of LAG port LagPortEntry .1.3.6.1.4.1.10297.202.7000.3.3.3.1 |
lagPortIndexThe index of LAG portro Integer32 .1.3.6.1.4.1.10297.202.7000.3.3.3.1.1 |
lagPortDescriptionThe description of the LAG portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.3.3.1.2 |
lagPortTypeMember port media typero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.3.3.1.3 |
lagPortEnableStateLAG port admin staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.3.1.4 |
lagPortLinkStatusLAG port link statusro Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.3.1.5 |
lagPortSpeedCurrent LAG port speedrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.3.1.6 |
lagPortDuplexCurrent LAG port duplexro Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.3.1.7 |
lagPortFlowCtrlConfigLAG port flow control configurationrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.3.1.8 |
lagPortFlowCtrlStatusCurrent LAG port flow control statero Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.3.1.9 |
lacpSystemPriorityConfigure the system priority of LACPrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.3.4 |
lacpPortTableThe table of LACP Port SEQUENCE OF LacpPortEntry .1.3.6.1.4.1.10297.202.7000.3.3.5 |
lacpPortEntryThe entry of LACP Port LacpPortEntry .1.3.6.1.4.1.10297.202.7000.3.3.5.1 |
lacpPortIndexThe index of LACP Portro Integer32 .1.3.6.1.4.1.10297.202.7000.3.3.5.1.1 |
lacpPriorityLACP priority of the portrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.3.5.1.2 |
lacpTimeoutThe periodic transmissions of LACP PDUs
Long: Transmit LACP PDU with slow periodic (30s).
Short: Transmit LACPP DU with fast periodic (1s).rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.5.1.3 |
lacpPortModeLACP mode of the portrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.3.5.1.4 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.4 |
vlanTableThe table of VLAN SEQUENCE OF VlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.1 |
vlanEntryThe entry of VLAN VlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.1.1 |
vlanIndexThe index of VLANrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.1.1.1 |
vlanIdThe VLAN IDrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.1.1.2 |
vlanNamePrefixThe prefix string of the VLAN namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.4.1.1.3 |
vlanTypeThe VLAN typero Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.1.1.4 |
vlanRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.1.1.99 |
vlanInterfaceTableThe table of the VLN inetrface SEQUENCE OF VlanInterfaceEntry .1.3.6.1.4.1.10297.202.7000.3.4.2 |
vlanInterfaceEntryThe entry of the VLN inetrface VlanInterfaceEntry .1.3.6.1.4.1.10297.202.7000.3.4.2.1 |
vlanPortIndexThe port index of the VLAN interfacero Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.2.1.1 |
vlanInterfaceVlanModeVLAN mode for the interface.
Hybrid: support all functions as defined in IEEE 802.1Q
Access: Accepts only untagged frames and join an untagged VLAN
Trunk: An ubtagged member of one VLAN at most, and is a tagged
member of zero or more VLANs.
Tunnel: Port-based Q-in-Q modero Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.2.1.2 |
vlanPvidThe port-based VLAN ID, It only available with Hybrid and Trunk mode.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.2.1.3 |
vlanAcceptedTypethe acceptable-frame-type of the specified interfaces. It is
only available with Hybrid mode.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.2.1.4 |
vlanIngressFilteringthe status of ingress filtering. It is only available with
Hybrid mode.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.2.1.5 |
portToVlanTableThe table of Port to VLAN SEQUENCE OF PortToVlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.3 |
portToVlanEntryThe entry of Port to VLAN PortToVlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.3.1 |
portToVlanVlanIndexThe index of Port to VLANro Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.3.1.1 |
portToVlanPortIndexThe port index of Port to VLANro Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.3.1.2 |
portToVlanVlanIdVLAN IDro Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.3.1.3 |
portToVlanInterfaceVlanModeDisplay the interface VLAN mode of this portro Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.3.1.4 |
portToVlanMembershipthe membership for this port with the specified VLAN ID.
Forbidden: Specify the port is forbidden in the VLAN.
Excluded: Specify the port is excluded in the VLAN.
Tagged: Specify the port is tagged in the VLAN.
Untagged: Specify the port is untagged in the VLAN.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.3.1.5 |
portToVlanPvidthe VLAN ID to be the port-based
VLAN ID for this port.ro Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.3.1.6 |
portVlanTableThe table of port VLAN SEQUENCE OF PortVlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.4 |
portVlanEntryThe entry of port VLAN PortVlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.4.1 |
portVlanPortIndexThe port index of port VLANro Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.4.1.1 |
portVlanPortModethe interface VLAN mode of this portro Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.4.1.2 |
portVlanAdminVlansthe administrative VLAN list of this portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.4.4.1.3 |
portVlanOperVlansThe operational VLAN list of this portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.4.4.1.4 |
voiceVlan OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.4.5 |
voiceVlanStateVoice VLAN staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.5.1 |
voiceVlanIdVoice VLAN IDrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.5.2 |
voiceVlanRemarkCos-8021pa value of vpt that will be advertised by LLDP-MEDrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.5.3 |
voiceVlanRemark1q1p remark staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.5.4 |
voiceVlanAgingTimevalue of aging timerw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.5.5 |
telephonyOUITableThe table of OUI SEQUENCE OF TelephonyOUIEntry .1.3.6.1.4.1.10297.202.7000.3.4.5.6 |
telephonyOUIEntryThe entry of OUI TelephonyOUIEntry .1.3.6.1.4.1.10297.202.7000.3.4.5.6.1 |
telephonyOUIIndexThe index of OUIro Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.1 |
telephonyOUIAddressoui addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.2 |
telephonyOUIDescriptiondescription of the specified MAC address to the voice VLAN OUI
tablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.3 |
telephonyOUIRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.99 |
telephonyOUIPortTableThe table of OUI port SEQUENCE OF TelephonyOUIPortEntry .1.3.6.1.4.1.10297.202.7000.3.4.5.7 |
telephonyOUIPortEntryThe entry of OUI port TelephonyOUIPortEntry .1.3.6.1.4.1.10297.202.7000.3.4.5.7.1 |
telephonyOUIPortIndexThe port index of OUI portro Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.1 |
telephonyOUIStateIngress/Egress type valuerw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.2 |
telephonyOUICosModeport cos mode
Src: QoS attributes are applied to packets with OUIs in the source
MAC address.
All: QoS attributes are applied to packets that are classified to the
Voice VLANrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.3 |
interfaceVlanTableThe table of interface VLAN SEQUENCE OF InterfaceVlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.6 |
interfaceVlanEntryThe entry of interface VLAN InterfaceVlanEntry .1.3.6.1.4.1.10297.202.7000.3.4.6.1 |
interfaceVlanIndexThe index of interface VLANrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.6.1.1 |
interfaceVlanIdThe interface VLAN IDrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.4.6.1.2 |
interfaceVlanNameThe name of interface VLANro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.4.6.1.3 |
interfaceVlanRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.4.6.1.99 |
eee OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.5 |
eeePortTableThe table of EEE Port SEQUENCE OF EeePortEntry .1.3.6.1.4.1.10297.202.7000.3.5.1 |
eeePortEntryThe entry of EEE Port EeePortEntry .1.3.6.1.4.1.10297.202.7000.3.5.1.1 |
eeePortIndexThe port index of EEE Portro Integer32 .1.3.6.1.4.1.10297.202.7000.3.5.1.1.1 |
eeeStatePort EEE function.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.5.1.1.2 |
multicast OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.6 |
unknownMulticastActionthe unknown multicast action
Drop: drop the unknown multicast data.
Flood: flood the unknown multicast data.
Router port: forward the unknown multicast data to router
port.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.1 |
forwardMethodthe multicast forward method.
MAC: forward method dmac+vid.ro Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.2 |
igmpSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.6.3 |
igmpSnoopingStatethe enabling status of IGMP functionalityrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.1 |
igmpSnoopingVersionthe igmp snooping version
v2: Only support process igmp v2 packet.
v3: Support v3 basic and v2.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.2 |
igmpSnoopingReportSuppressionthe enabling status of IGMP v2 report suppressionrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.3 |
igmpSnoopingTableThe table of IGMP snooping SEQUENCE OF IgmpSnoopingEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.4 |
igmpSnoopingEntryThe entry of IGMP snooping IgmpSnoopingEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1 |
igmpSnoopingIndexThe index of IGMP snoopingro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.1 |
igmpSnoopingVlanIdThe IGMP entry VLAN IDro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.2 |
igmpSnoopStatusThe enable status of IGMP VLAN functionalityrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.3 |
routerPortsAutoLearnThe enable statue of IGMP router port learning.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.4 |
queryRobustnessThe Robusstness Variable allows tuning for the expected packet loss
on a subnetrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.5 |
queryIntervalThe interval of querier send general queryrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.6 |
queryMaxResponseIntervalIn Membership Query Message, it specifies the maximum allowed
time before sending a responding report in units of 1/10 secondrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.7 |
lastMemberQueryCounterThe count that Querier-switch sends Group-Specific Queriers when
it receives a Leave Group message for a grouprw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.8 |
lastMemberQueryIntervalThe interval that Querier-switch sends Group-Specific Queriers
when it receives a Leave Group Message for a grouprw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.9 |
immediateLeaveLeave the group when receive IGMP Leave message.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.10 |
operQueryRobustnessThe operation query robustness.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.11 |
operQueryIntervalThe operation query interval.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.12 |
operQueryMaxResponseIntervalThe operating query max response interval.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.13 |
operLastMemberQueryCounterThe operating last member query counter.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.14 |
operLastMemberQueryIntervalThe operation last member query interval.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.15 |
igmpQuerierTableThe table of IGMP querier SEQUENCE OF IgmpQuerierEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.5 |
igmpQuerierEntryThe entry of IGMP querier IgmpQuerierEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.5.1 |
igmpQuerierVlanIdThe VLAN ID of IGMP querierro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.1 |
igmpQuerierStateThe enabling status of IGMP Querier Election on the chose
VLANsrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.2 |
igmpQuerierStatusThe enabling status of IGMP Querier Election on the chose
VLANsro Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.3 |
igmpQuerierVersionThe query version of IGMP Querier Election on the chose
VLANsrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.4 |
igmpQuerierIPThe query IP address of IGMP Querier Election on the chose
VLANsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.5 |
igmpStaticGroupTableThe table of IGMP static group SEQUENCE OF IgmpStaticGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.6 |
igmpStaticGroupEntryThe entry of IGMP static group IgmpStaticGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.6.1 |
igmpStaticGroupIndexThe index of IGMP static groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.1 |
igmpStaticGroupVlanIdThe VLAN ID of IGMP static grouprw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.2 |
igmpStaticGroupIPaddressThe IP address of this grouprw IpAddress .1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.3 |
igmpStaticGroupMemberPortsThe member ports of this grouprw Bits .1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.4 |
igmpStaticGroupRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.99 |
igmpGroupTableThe table of IGMP group SEQUENCE OF IgmpGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.7 |
igmpGroupEntryThe entry of IGMP group IgmpGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.7.1 |
igmpGroupVlanIdThe VLAN ID of IGMP groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.1 |
igmpGroupIPaddressThe group IP address of this groupro IpAddress .1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.2 |
igmpGroupMemberPortsThe member ports of this groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.3 |
igmpGroupTypeThe type of this groupro Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.4 |
igmpGroupLifeThe life time of this groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.5 |
igmpRouterTableThe table of IGMP router SEQUENCE OF IgmpRouterEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.8 |
igmpRouterEntryThe entry of IGMP router IgmpRouterEntry .1.3.6.1.4.1.10297.202.7000.3.6.3.8.1 |
igmpRouterVlanIdThe VLAN ID of the IGMP router.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.1 |
igmpRouterPortThe port of the IGMP router.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.2 |
igmpRouterExpireTimeThe expire time of the IGMP router.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.3 |
mldSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.6.4 |
mldSnoopingStatethe enabling status of MLD functionalityrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.1 |
mldSnoopingVersionthe MLD snooping versionrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.2 |
mldSnoopingReportSuppressionthe enabling status of MLD report suppressionrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.3 |
mldSnoopingTableThe table of MLD snooping SEQUENCE OF MLDSnoopingEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.4 |
mldSnoopingEntryThe entry of MLD snooping MLDSnoopingEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1 |
mldSnoopingIndexThe index of MLD snoopingro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.1 |
mldSnoopingVlanIdThe MLD entry VLAN IDro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.2 |
mldSnoopStatusThe enable status of MLD VLAN functionalityrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.3 |
mldSnoopRouterPortsAutoLearnThe enable statue of MLD router port learning.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.4 |
mldSnoopQueryRobustnessThe Robusstness Variable allows tuning for the expected packet loss
on a subnetrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.5 |
mldSnoopQueryIntervalThe interval of querier send general queryrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.6 |
mldSnoopQueryMaxResponseIntervalIn Membership Query Message, it specifies the maximum allowed
time before sending a responding report in units of 1/10 secondrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.7 |
mldSnoopLastMemberQueryCounterThe count that Querier-switch sends Group-Specific Queriers when
it receives a Leave Group message for a grouprw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.8 |
mldSnoopLastMemberQueryIntervalThe interval that Querier-switch sends Group-Specific Queriers
when it receives a Leave Group Message for a grouprw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.9 |
mldSnoopImmediateLeaveLeave the group when receive MLD Leave message.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.10 |
operMldSnoopQueryRobustnessThe operation MLD query robustness.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.11 |
operMldSnoopQueryIntervalThe operation MLD query interval.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.12 |
operMldSnoopQueryMaxResponseIntervalThe operating MLD query max response interval.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.13 |
operMldSnoopLastMemberQueryCounterThe operating MLD last member query counter.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.14 |
operMldSnoopLastMemberQueryIntervalThe operation MLD last member query interval.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.15 |
mldQuerierTableThe table of MLD querier SEQUENCE OF MLDQuerierEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.5 |
mldQuerierEntryThe entry of MLD querier MLDQuerierEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.5.1 |
mldQuerierVlanIdThe VLAN ID of MLD querierro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.1 |
mldQuerierStateThe enabling status of MLD Querier Election on the chose
VLANsrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.2 |
mldQuerierStatusThe querier status of MLD Querier Election on the chose
VLANsro Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.3 |
mldQuerierVersionThe query version of MLD Querier Election on the chose
VLANsrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.4 |
mldQuerierIPThe query IP address of MLD Querier Election on the chose
VLANsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.5 |
mldStaticGroupTableThe table of MLD static group SEQUENCE OF MLDStaticGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.6 |
mldStaticGroupEntryThe entry of MLD static group MLDStaticGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.6.1 |
mldStaticGroupIndexThe index of MLD static groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.1 |
mldStaticGroupVlanIdThe VLAN ID of MLD static grouprw Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.2 |
mldStaticGroupIPaddressThe IP address of this grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.3 |
mldStaticGroupMemberPortsThe member ports of this grouprw Bits .1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.4 |
mldStaticGroupRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.99 |
mldGroupTableThe table of MLD group SEQUENCE OF MLDGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.7 |
mldGroupEntryThe entry of MLD group MLDGroupEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.7.1 |
mldGroupVlanIdThe VLAN ID of MLD groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.1 |
mldGroupIPaddressThe group IP address of this groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.2 |
mldGroupMemberPortsThe member ports of this groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.3 |
mldGroupTypeThe type of this groupro Enumeration .1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.4 |
mldGroupLifeThe life time of this groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.5 |
mldRouterTableThe table of MLD router SEQUENCE OF MLDRouterEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.8 |
mldRouterEntryThe entry of MLD router MLDRouterEntry .1.3.6.1.4.1.10297.202.7000.3.6.4.8.1 |
mldRouterVlanIdThe VLAN ID of the MLD router.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.1 |
mldRouterPortThe port of the MLD router.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.2 |
mldRouterExpireTimeThe expire time of the MLD router.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.3 |
jamboFrame OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.7 |
jamboFramePktSizeJumbo frame sizerw Integer32 .1.3.6.1.4.1.10297.202.7000.3.7.1 |
stp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8 |
stpEnableSpecify the STP status to be enable/disable on the switch.
Enable STP will block all switch port and SNMP set will timeout.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.1 |
bpduForwardThe BPDU forwarding action when the global STP is disablerw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.2 |
pathCostMethodThe path cost method of STPrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.3 |
forceVersionThe operating mode of STP
STP-compatible: IEEE 802.1D STP operation
RSTP-Operation: IEEE 802.1W operationrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.4 |
stpPortTableThe table of STP port SEQUENCE OF StpPortEntry .1.3.6.1.4.1.10297.202.7000.3.8.5 |
stpPortEntryThe entry of STP port StpPortEntry .1.3.6.1.4.1.10297.202.7000.3.8.5.1 |
stpPortIndexThe port index of STPro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.5.1.1 |
stpAdminEnableenable/disable the STP port staterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.5.1.2 |
stpPathCostthe port is contribution, when it is the Root Port, to the Root
Path Cost for the Bridge. (0 means 'Auto')rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.5.1.3 |
stpEdgePortthe edge port configuration:
No: Force to false state (as link to a bridge).
Yes: Force to true state (as link to a host).rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.5.1.4 |
stpP2pMacthe Point-to-Point port configuration:rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.5.1.5 |
stpMigrateForce to try to use the new MST/RST BPDUs, and hence to test the
hypothesis that all legacy systems that do not understand the new
BPDU formats have been removed from the LAN segment on the
port(s).rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.5.1.6 |
stpBridgeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.6 |
stpBridgePrioritythe Bridge Priority in the CIST instance. Priority support the
following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672,
32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.6.1 |
stpBridgeForwardDelaythe delay time an interface takes to converge from blocking
state to forwarding state.
Max Age <= 2*(Forward Delay Time - 1)rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.6.2 |
stpBridgeMaxAgethe time any switch should wait before trying to change the STP
topology after unhearing Hello BPUD.
Max Age <= 2*(Forward Delay Time - 1)
Max Age >= 2*(Hello Time + 1)rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.6.3 |
stpBridgeTxHoldCountthe Transmit Hold Count used to limit BPDU transmission rate.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.6.4 |
stpBridgeHelloTimethe interval between periodic transmissions of BPDU by
Designated Ports.
Max Age >= 2*(Hello Time + 1)rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.6.5 |
stpBridgeStatus OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.7 |
bridgeIdentifierSTP bridge identifierro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.7.1 |
definatedRootBridgeSTP destination root bridge IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.7.2 |
rootPathCostSTP root path costro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.7.3 |
designatedBridgeSTP designated bridgero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.7.4 |
rootPortSTP root portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.7.5 |
lastTopologyChangeSTP last topology changero INTEGER .1.3.6.1.4.1.10297.202.7000.3.8.7.6 |
stpPortStatusTableThe table of STP port status SEQUENCE OF StpPortStatusEntry .1.3.6.1.4.1.10297.202.7000.3.8.8 |
stpPortStatusEntryThe entry of STP port status StpPortStatusEntry .1.3.6.1.4.1.10297.202.7000.3.8.8.1 |
stpPortStatusIndexThe index of STP port statusro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.8.1.1 |
stpPortPriorityThe Port Priority to the selected ports in the CIST instance.
Priority support the following value: 0, 16, 32, 48, 64, 80, 96,
112, 128, 144, 160, 176, 192, 208, 224, 240rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.8.1.2 |
stpPortPathCostPath Cost to the selected ports in the CIST instance.
(0 means `Auto`)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.8.1.3 |
stpPortDesignatedRootBridgeThe designated root bridgero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.8.1.4 |
stpPortRootPathCostThe root path costro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.8.1.5 |
stpPortDesignatedBridgeThe designated bridgero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.8.1.6 |
stpPortEdgrPortConfThe edge port configurationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.8.1.7 |
stpPortP2PMacConfThe point-to-point MAC configurationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.8.1.8 |
stpPortRolesThe port rolesro Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.8.1.9 |
stpPortStatusThe port statusro Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.8.1.10 |
stpStatisticTableThe table of STP statistic SEQUENCE OF StpStatisticEntry .1.3.6.1.4.1.10297.202.7000.3.8.9 |
stpStatisticEntryThe entry of STP statistic StpStatisticEntry .1.3.6.1.4.1.10297.202.7000.3.8.9.1 |
stpStatisticPortIndexThe port index of STP statisticro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.9.1.1 |
configurationBPDUsReceivedThe configuration BPDU receivedro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.9.1.2 |
tcnBPDUsReceivedThe TCN BPDU receivedro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.9.1.3 |
configurationBPDUsTransmittedThe configuration BPDU transmittedro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.9.1.4 |
tcnBPDUsTransmittedThe TCN BPDU transmittedro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.9.1.5 |
mstp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.10 |
mstConfigIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.10.1 |
mstConfigNameThe configuration name of MSTPrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.1.1 |
mstRevisionLevelThe revision level of MSTPrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.1.2 |
mstInstanceID OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.10.2 |
mstiIDSettingThe MSTI ID of MST instance IDrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.2.1 |
mstiVlanListSettingThe VLAN list of MST instance IDrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.2.2 |
mstiIDSettingMoveThe moving action of MST instance IDrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.10.2.3 |
mstiIDInfoTableThe table of MST instance ID info SEQUENCE OF MSTIIDEntry .1.3.6.1.4.1.10297.202.7000.3.8.10.2.4 |
mstiIDInfoEntryThe entry of MST instance ID info MSTIIDEntry .1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1 |
mstiIDIndexThe MSTI ID of MST instance ID inforo Integer32 (0 ..15) .1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.1 |
mstiVLANListThe VLAN List of MST instance ID inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.2 |
stpInstance OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.10.3 |
stpPriorityInfoTableThe table of STP priority info SEQUENCE OF STPPriorityInfoEntry .1.3.6.1.4.1.10297.202.7000.3.8.10.3.1 |
stpPriorityInfoEntryThe entry of STP priority info STPPriorityInfoEntry .1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1 |
stpMstiIDIndexThe MSTI ID of STP instance inforo Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.1 |
stpPriorityValueThe priority of STP instance info. Priority support the
following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672,
32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.2 |
stpPriorityDefaultSet the priority to default value.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.3 |
mstInstanceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.8.10.4 |
mstBridgeIdentifierSTP bridge identifier in MSTro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.1 |
mstDesignatedRootBridgeSTP destination root bridge ID in MSTro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.2 |
mstRootPathCostSTP root path cost in MSTro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.4.3 |
mstDesignatedBridgeSTP designated bridge in MSTro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.4 |
mstRootPortSTP root port in MSTro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.5 |
mstLastTopologyChangeSTP last topology change in MSTro INTEGER .1.3.6.1.4.1.10297.202.7000.3.8.10.4.6 |
mstStpPortStatusTableThe table of STP port status in MST SEQUENCE OF MSTStpPortStatusEntry .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7 |
mstStpPortStatusEntryThe entry of STP port status in MST MSTStpPortStatusEntry .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1 |
mstStpPortStatusIndexThe index of STP port status in MSTro Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.1 |
mstStpPortPriorityThe Port Priority to the selected ports in the CIST instance.
Priority support the following value: 0, 16, 32, 48, 64, 80, 96,
112, 128, 144, 160, 176, 192, 208, 224, 240ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.2 |
mstStpPortPathCostPath Cost to the selected ports in the CIST instance.
(0 means `Auto`)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.3 |
mstStpPortDesignatedRootBridgeThe designated root bridgero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.4 |
mstStpPortRootPathCostThe root path costro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.5 |
mstStpPortDesignatedBridgeThe designated bridgero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.6 |
mstStpPortEdgrPortConfThe edge port configurationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.7 |
mstStpPortP2PMacConfThe point-to-point MAC configurationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.8 |
mstStpPortRolesThe port rolesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.9 |
mstStpPortStatusThe port statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.10 |
mstInstanceInfoIDMST instance IDrw Integer32 .1.3.6.1.4.1.10297.202.7000.3.8.10.4.8 |
qinqVlan OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.9 |
outerVlanEthtypeQ-in-Q outer VLAN ether typerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.9.1 |
qinqPortInfoTableThe table of Q-in-Q port info SEQUENCE OF QinQPortInfoEntry .1.3.6.1.4.1.10297.202.7000.3.9.2 |
qinqPortInfoEntryThe entry of Q-in-Q port info QinQPortInfoEntry .1.3.6.1.4.1.10297.202.7000.3.9.2.1 |
qinqPortIndexThe port index of Q-in-Q port inforo INTEGER .1.3.6.1.4.1.10297.202.7000.3.9.2.1.1 |
qinqOuterPVIDThe Q-in-Q outer PVIDrw INTEGER .1.3.6.1.4.1.10297.202.7000.3.9.2.1.2 |
qinqOuterModeThe Q-in-Q outer moderw Enumeration .1.3.6.1.4.1.10297.202.7000.3.9.2.1.3 |
garp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.10 |
garpJoinTimeThe GARP join time. Join time * 2 must be below leave time.rw INTEGER .1.3.6.1.4.1.10297.202.7000.3.10.1 |
garpLeaveTimeThe GARP leave time. The leave time must below leave all time and bigger then Join time * 2rw INTEGER .1.3.6.1.4.1.10297.202.7000.3.10.2 |
garpLeaveAllTimeThe GARP leave all time. The leave all time must bigger then leave time.rw INTEGER .1.3.6.1.4.1.10297.202.7000.3.10.3 |
gvrp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.11 |
gvrpStatusThe status of GVRP.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.11.1 |
xRingElite OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.12 |
xRingEliteStateThe status of X-Ring Elite.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.12.1 |
xRingEliteRingIDTableThe table of X-Ring Elite ring ID SEQUENCE OF XRingEliteRingIDEntry .1.3.6.1.4.1.10297.202.7000.3.12.2 |
xRingEliteRingIDEntryThe entry of X-Ring Elite ring ID XRingEliteRingIDEntry .1.3.6.1.4.1.10297.202.7000.3.12.2.1 |
xRingEliteRingIDIndexThe index of X-Ring Elite ring IDro Integer32 .1.3.6.1.4.1.10297.202.7000.3.12.2.1.1 |
xRingEliteRingIDThe ring ID of X-Ring Eliterw Integer32 (1 .. 255) .1.3.6.1.4.1.10297.202.7000.3.12.2.1.2 |
xRingEliteRuleThe rule of the X-Ring Eliterw Enumeration .1.3.6.1.4.1.10297.202.7000.3.12.2.1.3 |
xRingElitePort1The port1 of this X-Ring Elite. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.12.2.1.4 |
xRingElitePort2The port2 of this X-Ring Elite. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.12.2.1.5 |
xRingEliteRingIDStatusThe status of this X-Ring Elitero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.12.2.1.6 |
xRingElitePort1StatusThe port1 status of this X-Ring Elitero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.12.2.1.7 |
xRingElitePort2StatusThe port2 status of this X-Ring Elitero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.12.2.1.8 |
xRingEliteRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.12.2.1.99 |
loopback OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.13 |
loopbackEnabledThe status of loopback detection.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.13.1 |
loopbackIntervalThe interval of loopback detection.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.13.2 |
loopbackRecoverTimeThe recover time of loopback detection.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.13.3 |
loopbackPortTableThe port table of loopback detection SEQUENCE OF LoopbackPortEntry .1.3.6.1.4.1.10297.202.7000.3.13.4 |
loopbackPortEntryThe port entry of loopback detection LoopbackPortEntry .1.3.6.1.4.1.10297.202.7000.3.13.4.1 |
loopbackPortIndexThe index of port loopback detectionro Integer32 .1.3.6.1.4.1.10297.202.7000.3.13.4.1.1 |
loopbackPortEnabledThe enabled status of port loopback detectionrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.13.4.1.2 |
loopbackPortLoopStatusThe loop status of port loopback detectionro Enumeration .1.3.6.1.4.1.10297.202.7000.3.13.4.1.3 |
xRingPro OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.14 |
xRingProStatusThe status of X-Ring Prorw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.1 |
xRingProRingSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.14.2 |
xRingProRingIDThe ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.2.1 |
xRingProRingPort1The port1 of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.2.2 |
xRingProRingPort2The port2 of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.2.3 |
xRingProRingAddThe add action of X-Ring Prorw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.2.4 |
xRingProCoupleSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.14.3 |
xRingProCoupleIDThe couple ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.3.1 |
xRingProCouplePortThe couple port of X-Ring Prorw Bits .1.3.6.1.4.1.10297.202.7000.3.14.3.2 |
xRingProCoupleMasterRingIDThe master ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.3.3 |
xRingProCoupleAddThe add action of X-Ring Prorw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.3.4 |
xRingProInfoTableThe table of X-Ring Pro Infomation SEQUENCE OF XRingProInfoEntry .1.3.6.1.4.1.10297.202.7000.3.14.4 |
xRingProInfoEntryThe entry of X-Ring Pro Infomation XRingProInfoEntry .1.3.6.1.4.1.10297.202.7000.3.14.4.1 |
xRingProInfoRingIDThe ring ID of X-Ring Pro Infomationro Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.4.1.1 |
xRingProInfoModeThe mode of X-Ring Pro Infomationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.14.4.1.2 |
xRingProInfoOperStateThe operation state of X-Ring Pro Infomationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.14.4.1.3 |
xRingProInfoPort1The port1 of X-Ring Pro Infomation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.14.4.1.4 |
xRingProInfoPort1FwdStateThe port1 forwarding state of X-Ring Pro Infomationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.14.4.1.5 |
xRingProInfoPort2The port2 of X-Ring Pro Infomationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.14.4.1.6 |
xRingProInfoPort2FwdStateThe port2 forwarding state of X-Ring Pro Infomationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.14.4.1.7 |
xRingProInfoDelThe delete action of X-Ring Pro Infomationrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.4.1.8 |
xRingProInfoRoleThe role of X-Ring Pro Infomationro Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.4.1.9 |
xRingProPairSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.14.5 |
xRingProPairIDThe pair ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.5.1 |
xRingProPairPortThe pair port of X-Ring Prorw Bits .1.3.6.1.4.1.10297.202.7000.3.14.5.2 |
xRingProPairMasterRingIDThe pair master ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.5.3 |
xRingProPairAddThe add action of X-Ring Prorw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.5.4 |
xRingProRPairSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.14.6 |
xRingProRPairIDThe R-pair ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.6.1 |
xRingProRPairPortThe R-pair port of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.6.2 |
xRingProRPairMasterRingIDThe R-pair master ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.6.3 |
xRingProRPairAddThe add action of X-Ring Prorw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.6.4 |
xRingProChainSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.14.7 |
xRingProChainIDThe chain ring ID of X-Ring Prorw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.7.1 |
xRingProChainRoleThe role of X-Ring Pro.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.7.2 |
xRingProChainHeadPortThe head port of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.7.3 |
xRingProChainMemberPortThe member port of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.14.7.4 |
xRingProChainAddThe add action of X-Ring Prorw Enumeration .1.3.6.1.4.1.10297.202.7000.3.14.7.5 |
gmrp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.15 |
gmrpStatusThe status of GMRP.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.15.1 |
gmrpMulticastGroupTableThe table of GMRP multicast group SEQUENCE OF GMRPMulticastGroupEntry .1.3.6.1.4.1.10297.202.7000.3.15.2 |
gmrpMulticastGroupEntryThe entry of GMRP multicast group GMRPMulticastGroupEntry .1.3.6.1.4.1.10297.202.7000.3.15.2.1 |
gmrpMulticastGroupIndexThe index of GMRP multicast groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.15.2.1.1 |
gmrpMulticastGroupVlanIdThe vlan id of GMRP multicast groupro Integer32 .1.3.6.1.4.1.10297.202.7000.3.15.2.1.2 |
gmrpMulticastGroupMacAddressThe MAC address of GMRP multicast groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.15.2.1.3 |
gmrpMulticastGroupTypeThe type of GMRP multicast groupro Enumeration .1.3.6.1.4.1.10297.202.7000.3.15.2.1.4 |
gmrpMulticastGroupMemberPortsThe member ports of GMRP multicast groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.15.2.1.5 |
erps OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.3.16 |
erpsStateThe status of ERPSrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.1 |
erpsGroupTableThe table of ERPS group. SEQUENCE OF ErpsGroupEntry .1.3.6.1.4.1.10297.202.7000.3.16.2 |
erpsGroupEntryThe entry of ERPS group. ErpsGroupEntry .1.3.6.1.4.1.10297.202.7000.3.16.2.1 |
erpsGroupRingIndexThe index of ERPS group.ro Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.1 |
erpsGroupInstanceThe instance of ERPS group.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.2 |
erpsGroupRingIdThe ring ID of ERPS group.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.3 |
erpsGroupRoleThe role of ERPS grouprw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.4 |
erpsGroupStateThe current state of ERPS group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.16.2.1.5 |
erpsGroupEastLinkThe east link port of ERPS group. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.6 |
erpsGroupEastLinkRPLThe rpl setting of ERPS group east link.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.7 |
erpsGroupEastLinkStateThe current state of ERPS group east link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.16.2.1.8 |
erpsGroupWestLinkThe west link port of ERPS group. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.9 |
erpsGroupWestLinkRPLThe rpl setting of ERPS group west linkrw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.10 |
erpsGroupWestLinkStateThe current state of ERPS group west link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.3.16.2.1.11 |
erpsGroupMELThe MEL of ERPS group.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.12 |
erpsGroupRAPSChannelVlanThe r-aps channel vlan of ERPS group.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.13 |
erpsGroupTrafficChannelThe traffic channel of ERPS group.rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.14 |
erpsGroupRevertiveThe revertive setting of ERPS group.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.15 |
erpsGroupTypeThe ring type of ERPS group.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.16 |
erpsGroupInterconnectedThe interconnected setting of ERPS group.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.17 |
erpsGroupChannelThe virtual channel setting of ERPS group.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.18 |
erpsGroupTcPropagationThe tc-propagation setting of ERPS group.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.19 |
erpsWTRTimerThe WTR timer of ERPS group.(1 Unit = 1 minute)rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.20 |
erpsGuardTimerThe guard timer of ERPS group.(1 Unit = 10 ms)rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.21 |
erpsHoldOffTimerThe hold-off timer of ERPS group.(1 Unit = 100 ms)rw Integer32 .1.3.6.1.4.1.10297.202.7000.3.16.2.1.22 |
erpsGroupRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.3.16.2.1.99 |
macAddressTable OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.4 |
staticMacSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.4.1 |
staticMacSettingTableThe table of static MAC setting SEQUENCE OF StaticMacSettingEntry .1.3.6.1.4.1.10297.202.7000.4.1.1 |
staticMacSettingEntryThe entry of static MAC setting StaticMacSettingEntry .1.3.6.1.4.1.10297.202.7000.4.1.1.1 |
staticMacSettingIndexThe index of static MAC settingro Integer32 .1.3.6.1.4.1.10297.202.7000.4.1.1.1.1 |
staticMacSettingMacAddressThe MAC address to which packets will be statically forwardef.
It only supports unicast MAC addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.4.1.1.1.2 |
staticMacSettingVlanthe VLAN which the static MAC belongs torw Integer32 .1.3.6.1.4.1.10297.202.7000.4.1.1.1.3 |
staticMacSettingPortthe port number of the MAC entry. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ...rw Integer32 .1.3.6.1.4.1.10297.202.7000.4.1.1.1.4 |
staticMacSettingRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.4.1.1.1.99 |
dynamicMacSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.4.2 |
macAgingTimeThe dynamic MAC address aging out valuerw Integer32 .1.3.6.1.4.1.10297.202.7000.4.2.1 |
dynamicLearned OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.4.3 |
clearMacAddressTableClear the MAC tablerw Enumeration .1.3.6.1.4.1.10297.202.7000.4.3.1 |
macAddressInfoTableThe table of MAC address info SEQUENCE OF MacAddressInfoEntry .1.3.6.1.4.1.10297.202.7000.4.3.2 |
macAddressInfoEntryThe entry of MAC address info MacAddressInfoEntry .1.3.6.1.4.1.10297.202.7000.4.3.2.1 |
macAddressInfoIndexThe index of MAC address inforo Integer32 .1.3.6.1.4.1.10297.202.7000.4.3.2.1.1 |
macAddressInfoMACThe MAC address to show dynamic MAC entries.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.4.3.2.1.2 |
macAddressInfoVlanThe VLAN to show dynamic MAC entries.ro Integer32 .1.3.6.1.4.1.10297.202.7000.4.3.2.1.3 |
macAddressInfoTypeThe type of MAC address inforo Enumeration .1.3.6.1.4.1.10297.202.7000.4.3.2.1.4 |
macAddressInfoPortThe port of MAC address inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.4.3.2.1.5 |
addtoStaticMacTableAdd the entry from dynamic to static.rw Enumeration .1.3.6.1.4.1.10297.202.7000.4.3.2.1.6 |
security OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5 |
stormControl OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.1 |
stromControlUnitThe mode of stromg control.
pps: strom control rate calculates by packet-based
bps: strom control rate calculates by octet-basedrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.1 |
stromControlPreamble-IFGthe rate calculates w/o preamble & IFG (20 bytes)
Excluded: exclude preamble & IFG (20 bytes) when count
ingress storm control rate.
Included: include preamble & IFG (20 bytes) when count
ingress storm control rate.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.2 |
stromControlPortTableThe table of port security setting SEQUENCE OF PortSecSettingEntry .1.3.6.1.4.1.10297.202.7000.5.1.3 |
stromControlPortEntryThe entry of port security setting PortSecSettingEntry .1.3.6.1.4.1.10297.202.7000.5.1.3.1 |
stromControlPortIndexThe port index of port security settingro Integer32 .1.3.6.1.4.1.10297.202.7000.5.1.3.1.1 |
stromControlPortStatethe state of settingrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.3.1.2 |
stromControlPortActionthe state of setting
Drop: Packets exceed storm control rate will be droped.
Shutdown: Port exceed storm control rate will be shutdown.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.3.1.3 |
enablebroadcastenable/diable the broadcast packetrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.3.1.4 |
broadcastRateValue of storm control rate, Unit: pps (packet per-second) or Kbps
(Kbits per-second) depends on global mode setting.
The range is from 0 to 1000000.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.1.3.1.5 |
enableunknownMulticastenable/diable the unknown multicast packetrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.3.1.6 |
unknownMulticastRateValue of storm control rate, Unit: pps (packet per-second) or Kbps
(Kbits per-second) depends on global mode setting.
The range is from 0 to 1000000.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.1.3.1.7 |
enableunknownUnicastenable/diable the unknown unicast packetrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.1.3.1.8 |
unknownUnicastRateValue of storm control rate, Unit: pps (packet per-second) or Kbps
(Kbits per-second) depends on global mode setting.
The range is from 0 to 1000000.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.1.3.1.9 |
protectedPort OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.2 |
protectedPortTableThe table of protected port SEQUENCE OF ProtectedPortEntry .1.3.6.1.4.1.10297.202.7000.5.2.1 |
protectedPortEntryThe entry of protected port ProtectedPortEntry .1.3.6.1.4.1.10297.202.7000.5.2.1.1 |
protectedPortIndexThe port index of protected portro Integer32 .1.3.6.1.4.1.10297.202.7000.5.2.1.1.1 |
protectedPortTypeConfigure port protect type
Unprotected: Unprotected port can communicate
with all ports.
Protected: Prevent protected ports from
communication with each other.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.2.1.1.2 |
dos OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.3 |
dmacEqualsmacBoth the source and the destination MAC addresses are the
samerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.1 |
landBoth the source and the destination IPv4/IPv6 addresses are the
samerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.2 |
udpBlatBoth the source and the destination UDP port are the samerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.3 |
tcpBlatBoth the source and the destination TCP port are the samerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.4 |
podPing packets that length are larger than 65535 bytesrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.5 |
ipv6MinFragmentIPv6 fragmented packets (not including the last one) that
payload length less than 1240 bytes, and the Min length can
be configured if needed.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.6 |
ipv6MinFragmentValueIPv6 fragmented packets (not including the last one) that
payload length less than 1240 bytes, and the Min length can
be configured if needed.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.3.7 |
icmpFragmentFragmented ICMP packets.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.8 |
ipv4PingMaxSizeIPv4 PING packet with the lengthrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.9 |
ipv6PingMaxSizeIPv6 PING packet with the lengthrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.10 |
pingMaxSizeSettingPing packet Max Size Setting. The default value is 512
Bytes, it can be configured if needed.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.3.11 |
smurfAttackICMP echo request packet that destination IPv4 address is
broadcast address.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.12 |
smurfAttackValueThe default Netmask length is 0, and it can be configured if
needed.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.3.13 |
tcpMinHdrSizeTCP packet that header length is less than the configured
value.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.14 |
tcpMinHdrSizeValueThe default TCP Min Hdr Size is 20, it can be configured if
needed.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.3.15 |
tcp-SynTCP SYN packets with source port less than 1024.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.16 |
nullScanAttackTCP sequence number is zero, and all control flags are
zeroes.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.17 |
xMasScanAttackTCP sequence number is zero, and the FIN/URG/PSH flags
are set.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.18 |
tcpSYN-FINAttackA TCP packet with the SYN and FIN flags set.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.19 |
tcpSYN-RSTAttackA TCP packet with the SYN and RST flags set.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.20 |
tcpFragmentFragmented TCP packets.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.21 |
dosPortTableThe table of DoS port SEQUENCE OF DosPortEntry .1.3.6.1.4.1.10297.202.7000.5.3.22 |
dosPortEntryThe entry of DoS port DosPortEntry .1.3.6.1.4.1.10297.202.7000.5.3.22.1 |
dosportIndexThe port index of DoS portro Integer32 .1.3.6.1.4.1.10297.202.7000.5.3.22.1.1 |
dosProtectionConfigure port protect staterw Enumeration .1.3.6.1.4.1.10297.202.7000.5.3.22.1.2 |
access OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.4 |
telnetInfo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.4.1 |
telnetServiceenable/disable the tlent servicerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.4.1.1 |
currentTelnetSessionCountThe current telnet session counterro Integer32 .1.3.6.1.4.1.10297.202.7000.5.4.1.2 |
httpSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.4.2 |
httpServiceenable/disable the http servicerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.4.2.1 |
httpSessionTimeoutthe HTTP session timeoutrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.4.2.2 |
httpsSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.4.3 |
httpsServiceenable/disable the https servicerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.4.3.1 |
httpsSessionTimeoutthe HTTPs session timeoutrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.4.3.2 |
sshInfo OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.4.4 |
sshServiceenable/disable the ssh servicerw Enumeration .1.3.6.1.4.1.10297.202.7000.5.4.4.1 |
portSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.5 |
portSecurityTableThe table of port security SEQUENCE OF PortSecurityEntry .1.3.6.1.4.1.10297.202.7000.5.5.1 |
portSecurityEntryThe entry of port security PortSecurityEntry .1.3.6.1.4.1.10297.202.7000.5.5.1.1 |
portSecurityPortIndexThe port index of port securityro Integer32 .1.3.6.1.4.1.10297.202.7000.5.5.1.1.1 |
portSecurityEnabledEnable/Disable port securityrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.5.1.1.2 |
portSecurityFDBLimitThe number of FDB learning.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.5.1.1.3 |
portSecurityViolationMACNotifyEnable/Disable Violation MAC Notificationrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.5.1.1.4 |
ipSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.6 |
ipSecurityStatusEnable/Disable IP securityrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.6.1 |
ipSecurityTableThe table of IP security SEQUENCE OF IPSecurityEntry .1.3.6.1.4.1.10297.202.7000.5.6.2 |
ipSecurityEntryThe entry of IP security IPSecurityEntry .1.3.6.1.4.1.10297.202.7000.5.6.2.1 |
ipSecurityIndexThe index of IP securityro Integer32 .1.3.6.1.4.1.10297.202.7000.5.6.2.1.1 |
ipSecurityIPAddrThe IP address of IP securityrw IpAddress .1.3.6.1.4.1.10297.202.7000.5.6.2.1.2 |
ipSecurityIPMaskThe IP mask of IP securityrw IpAddress .1.3.6.1.4.1.10297.202.7000.5.6.2.1.3 |
ipSecurityServiceThe service of IP securityrw Bits .1.3.6.1.4.1.10297.202.7000.5.6.2.1.4 |
ipSecurityVlanIdThe VLAN id of IP security. This value will appear on multiple interface.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.6.2.1.5 |
ipSecurityRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.6.2.1.99 |
ieee8021x OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.7 |
ieee8021xStateEnable/Disable IEEE 802.1xrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.7.1 |
ieee8021xServerIPThe server IP address of IEEE 802.1xrw IpAddress .1.3.6.1.4.1.10297.202.7000.5.7.2 |
ieee8021xServerPortThe server port of IEEE 802.1xrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.7.3 |
ieee8021xAccountingPortThe accounting port of IEEE 802.1xrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.7.4 |
ieee8021xSecurityKeyThe security key of IEEE 802.1xrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.7.5 |
ieee8021xReauthPeriodThe reauth period of IEEE 802.1xrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.7.6 |
ieee8021xPortTableThe table of IEEE 802.1x SEQUENCE OF IEEE8021xPortEntry .1.3.6.1.4.1.10297.202.7000.5.7.7 |
ieee8021xPortEntryThe entry of IEEE 802.1x IEEE8021xPortEntry .1.3.6.1.4.1.10297.202.7000.5.7.7.1 |
ieee8021xPortIndexThe index of IEEE 802.1xro Integer32 .1.3.6.1.4.1.10297.202.7000.5.7.7.1.1 |
ieee8021xPortStateThe port state of IEEE 802.1xrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.7.7.1.2 |
ieee8021xAuthBasedThe authentication based of IEEE 802.1xrw Enumeration .1.3.6.1.4.1.10297.202.7000.5.7.8 |
securityLogin OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.8 |
securityLoginStateEnable/Disable security login.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.8.1 |
radiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.8.2 |
radiusServerIPRadius server IP.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.8.2.1 |
radiusServerPortRadius server port.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.8.2.2 |
radiusServerSecurityKeyThe security key of radius server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.8.2.3 |
tacacsServer OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.8.3 |
tacacsServerIPTACACS server IP.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.8.3.1 |
tacacsServerPortTACACS server port.rw Integer32 .1.3.6.1.4.1.10297.202.7000.5.8.3.2 |
tacacsServerSecurityKeyThe security key of TACACS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.8.3.3 |
securityLoginTypeEnable/Disable security login.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.8.4 |
securityLoginHttpStateEnable/Disable HTTP type of security login.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.8.5 |
securityLoginTelnetStateEnable/Disable telnet type of security login.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.8.6 |
securityLoginSSHStateEnable/Disable SSH type of security login.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.8.7 |
acl OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.9 |
macAclTableThe table of mac acl SEQUENCE OF MacAclEntry .1.3.6.1.4.1.10297.202.7000.5.9.1 |
macAclEntryThe entry of mac acl MacAclEntry .1.3.6.1.4.1.10297.202.7000.5.9.1.1 |
macAclIndexThe index of mac ACL entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.9.1.1.1 |
destinationMacAddressThe destination MAC address of mac ACL entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.9.1.1.2 |
destinationMacMaskThe destination MAC mask of mac ACL entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.9.1.1.3 |
sourceMacAddressThe source MAC address of mac ACL entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.9.1.1.4 |
sourceMacMaskThe source MAC mask of mac ACL entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.9.1.1.5 |
macAclEtherTypeThe ether type of mac ACL entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.9.1.1.6 |
macAclVlanIDThe vlan id of mac ACL entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.9.1.1.7 |
macAclPortListThe port list of mac ACL entry.rw Bits .1.3.6.1.4.1.10297.202.7000.5.9.1.1.8 |
macAclActionThe action of mac ACL entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.1.1.9 |
macAclActiveStatusThe active status of mac ACL entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.1.1.10 |
macAclRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.1.1.99 |
ipAclTableThe table of ip acl SEQUENCE OF IpAclEntry .1.3.6.1.4.1.10297.202.7000.5.9.2 |
ipAclEntryThe entry of ip acl IpAclEntry .1.3.6.1.4.1.10297.202.7000.5.9.2.1 |
ipAclIndexThe index of ip ACL entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.9.2.1.1 |
destinationIpAddressThe destination ip address of ip ACL entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.9.2.1.2 |
destinationIpMaskThe destination ip mask of ip ACL entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.9.2.1.3 |
sourceIpAddressThe source ip address of ip ACL entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.9.2.1.4 |
sourceIpMaskThe source ip mask of ip ACL entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.9.2.1.5 |
ipProtocolThe ip protocol of ip ACL entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.2.1.6 |
l4DestinationPortThe L4 destination port of ip ACL entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.9.2.1.7 |
l4SourcePortThe L4 source port of ip ACL entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.9.2.1.8 |
ipAclPortListThe port list of ip ACL entry.rw Bits .1.3.6.1.4.1.10297.202.7000.5.9.2.1.9 |
ipAclActionThe action of ip ACL entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.2.1.10 |
ipAclActiveStatusThe active status of ip ACL entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.2.1.11 |
ipAclRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.9.2.1.99 |
ipSourceGuard OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.10 |
ipSourceGuardEnablePortsThe enable port list for ip source guard.rw Bits .1.3.6.1.4.1.10297.202.7000.5.10.1 |
ipSourceGuardTableThe table of ip source guard SEQUENCE OF IpSourceGuardEntry .1.3.6.1.4.1.10297.202.7000.5.10.2 |
ipSourceGuardEntryThe entry of ip source guard IpSourceGuardEntry .1.3.6.1.4.1.10297.202.7000.5.10.2.1 |
ipSourceGuardIndexThe index of ip source guard entryro Integer32 .1.3.6.1.4.1.10297.202.7000.5.10.2.1.1 |
ipSourceGuardSourceIpThe destination ip address of ip source guard entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.10.2.1.2 |
ipSourceGuardSourceMacThe destination MAC address of ip source guard entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.10.2.1.3 |
ipSourceGuardPortThe port of ip source guard entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.5.10.2.1.4 |
ipSourceGuardRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.10.2.1.5 |
dhcpSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.11 |
dhcpSnoopingStateEnable/Disable DHCP snooping.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.11.1 |
dhcpSnoopingPortsThe enable port list for dhcp snooping.rw Bits .1.3.6.1.4.1.10297.202.7000.5.11.2 |
dhcpSnoopingBindingPortsThe enable blinding port list for dhcp snooping.rw Bits .1.3.6.1.4.1.10297.202.7000.5.11.3 |
dhcpSnoopingTableThe table of dhcp snooping SEQUENCE OF DhcpSnoopingEntry .1.3.6.1.4.1.10297.202.7000.5.11.4 |
dhcpSnoopingEntryThe entry of dhcp snooping DhcpSnoopingEntry .1.3.6.1.4.1.10297.202.7000.5.11.4.1 |
dhcpSnoopingIndexThe index of dhcp snooping entryro Integer32 .1.3.6.1.4.1.10297.202.7000.5.11.4.1.1 |
dhcpSnoopingMacThe destination MAC address of dhcp snooping entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.11.4.1.2 |
dhcpSnoopingIpThe destination ip address of dhcp snooping entry.ro IpAddress .1.3.6.1.4.1.10297.202.7000.5.11.4.1.3 |
dhcpSnoopingLeaseTimeThe lease time of dhcp snooping entryro INTEGER .1.3.6.1.4.1.10297.202.7000.5.11.4.1.4 |
dhcpSnoopingVlanIdThe VLAN ID of dhcp snooping entryro Integer32 .1.3.6.1.4.1.10297.202.7000.5.11.4.1.5 |
dhcpSnoopingPortThe port of dhcp snooping entryro Integer32 .1.3.6.1.4.1.10297.202.7000.5.11.4.1.6 |
arpSpoofing OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.5.12 |
arpSpoofingTableThe table of arp spoofing SEQUENCE OF ArpSpoofingEntry .1.3.6.1.4.1.10297.202.7000.5.12.1 |
arpSpoofingEntryThe entry of arp spoofing ArpSpoofingEntry .1.3.6.1.4.1.10297.202.7000.5.12.1.1 |
arpSpoofingIndexThe index of arp spoofing entryro Integer32 .1.3.6.1.4.1.10297.202.7000.5.12.1.1.1 |
arpSpoofingSourceMacThe source MAC address of arp spoofing entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.5.12.1.1.2 |
arpSpoofingSourceIpThe source ip address of arp spoofing entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.5.12.1.1.3 |
arpSpoofingRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.5.12.1.1.4 |
qos OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6 |
general OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6.1 |
qosModeThe QoS operaion moderw Enumeration .1.3.6.1.4.1.10297.202.7000.6.1.1 |
qosPortSettingTableThe table of QoS port setting SEQUENCE OF QosPortSettingEntry .1.3.6.1.4.1.10297.202.7000.6.1.2 |
qosPortSettingEntryThe entry of QoS port setting QosPortSettingEntry .1.3.6.1.4.1.10297.202.7000.6.1.2.1 |
qosPortIndexThe port index of QoS port settingro Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.2.1.1 |
qosPortCosThe default CoS/802.1p priority valuerw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.2.1.2 |
qosPortRemarkCoSenable/disable CoS remarkrw Enumeration .1.3.6.1.4.1.10297.202.7000.6.1.2.1.3 |
qosPortRemarkDSCPenable/disable DSCP remarkrw Enumeration .1.3.6.1.4.1.10297.202.7000.6.1.2.1.4 |
qosPortRemarkIPPrecedenceEnable/Disable IP Precedence remarkrw Enumeration .1.3.6.1.4.1.10297.202.7000.6.1.2.1.5 |
queueSettingTableThe table of queue setting SEQUENCE OF QueueSettingEntry .1.3.6.1.4.1.10297.202.7000.6.1.3 |
queueSettingEntrythe entry of queue setting QueueSettingEntry .1.3.6.1.4.1.10297.202.7000.6.1.3.1 |
queueIndexThe index of queue settingro Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.3.1.1 |
queueMethodqueue to strict priority type or Weight round robin typerw Enumeration .1.3.6.1.4.1.10297.202.7000.6.1.3.1.2 |
queueWeightIf the queue type is WRR, set the queue weight for the
queue.rw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.3.1.3 |
queuePercentOfWRRBandwidthThe percentage of the WRR bandwidthro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.6.1.3.1.4 |
costoQueueMapTableThe table of CoS to queue SEQUENCE OF CostoQueueMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.4 |
costoQueueMapEntryThe entry of CoS to queue CostoQueueMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.4.1 |
cosIndexThe index of CoS to queuero Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.4.1.1 |
cosQueueThe queue of CoS to queuerw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.4.1.2 |
queuetoCosMapTableThe table of queue to CoS SEQUENCE OF QueueToCosMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.5 |
queuetoCosMapEntryThe entry of queue to CoS QueueToCosMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.5.1 |
queuetoCosIndexThe queue index of queue to CoSro Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.5.1.1 |
queueCosThe cos of queue to CoSrw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.5.1.2 |
dscptoQueueMapTableThe table of DSCP to queue SEQUENCE OF DscptoQueueMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.6 |
dscptoQueueMapEntryThe entry of DSCP to queue DscptoQueueMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.6.1 |
dscpIndexThe DSCP index of DSCP to queuero Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.6.1.1 |
dscpQueueThe queue of DSCP to queuerw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.6.1.2 |
queuetoDSCPMapTableThe table of queue to DSCP SEQUENCE OF QueuetoDSCPMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.7 |
queuetoDSCPMapEntryThe entry of queue to DSCP QueuetoDSCPMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.7.1 |
queuetoDSCPIndexThe queue index of queue to DSCPro Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.7.1.1 |
queuDscpThe DSCP of queue to DSCPrw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.7.1.2 |
ipPrecedencetoQueueMapTableThe table of IP precedence to queue SEQUENCE OF IpPrecedencetoQueueMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.8 |
ipPrecedencetoQueueMapEntryThe entry of IP precedence to queue IpPrecedencetoQueueMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.8.1 |
ipPrecedenceIndexThe index of IP precedence to queuero Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.8.1.1 |
ipPrecedenceQueueThe queue of IP precedence to queuerw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.8.1.2 |
queueToipPrecedenceMapTableThe table of queue to IP precedence SEQUENCE OF QueueToipPrecedenceMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.9 |
queueToipPrecedenceMapEntryThe entry of queue to IP precedence QueueToipPrecedenceMapEntry .1.3.6.1.4.1.10297.202.7000.6.1.9.1 |
queueToipPrecedenceIndexThe index of queue to IP precedencero Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.9.1.1 |
ipPrecedenceThe IP precedence of queue to IP precedencerw Integer32 .1.3.6.1.4.1.10297.202.7000.6.1.9.1.2 |
qosBasicMode OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6.2 |
trustModethe QoS operation mode.
CoS/802.1p: Traffic is mapped to queues based on
the CoS field in the VLAN tag, or based on the per-port
default CoS value if there is no VLAN tag on the
incoming packet.
DSCP: All IP traffic is mapped to queues based on the
DSCP field in the IP header. If traffic is not IP traffic, it
is mapped to the lowest priority queue.
CoS/802.1p-DSCP: All IP traffic is mapped to
queues based on the DSCP field in the IP header. If
traffic is not IP but has VLAN tag, mapped to queues
based on the CoS value in the VLAN tag.
IP Precedence: All IP traffic is mapped to queues
based on the IP Precedence field in the IP header. If
traffic is not IP traffic, it is mapped to the lowest
priority queue.
None: All traffic is mapped to the lowest priority
queue.rw Enumeration .1.3.6.1.4.1.10297.202.7000.6.2.1 |
qosBasicPortTableThe table of QoS port SEQUENCE OF QosPortEntry .1.3.6.1.4.1.10297.202.7000.6.2.2 |
qosBasicPortEntryThe entry of QoS port QosPortEntry .1.3.6.1.4.1.10297.202.7000.6.2.2.1 |
qosBasicPortIndexThe port index of QoS portro Integer32 .1.3.6.1.4.1.10297.202.7000.6.2.2.1.1 |
qosBasicPortTrustthe port trust state
Enabled: Traffic from this port will follow the global
trust type.
Disabled: Traffic will always go to the lowest priority
queue.rw Enumeration .1.3.6.1.4.1.10297.202.7000.6.2.2.1.2 |
rateLimit OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6.3 |
ingressBandwidthControl OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6.3.1 |
ingressBandwidthTableThe table of ingress bandwidth SEQUENCE OF IngressBandwidthEntry .1.3.6.1.4.1.10297.202.7000.6.3.1.1 |
ingressBandwidthEntryThe entry of ingress bandwidth IngressBandwidthEntry .1.3.6.1.4.1.10297.202.7000.6.3.1.1.1 |
ingressBandwidthPortIndexThe port index of ingress bandwidthro Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.1 |
ingressBandwidthStateenable/disable ingress bandwidth controlrw Enumeration .1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.2 |
ingressBandwidthRaterate value, unit:16Kbpsrw Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.3 |
egressBandwidthControl OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6.3.2 |
egressBandwidthTableThe table of egress bandwidth SEQUENCE OF EgressBandwidthEntry .1.3.6.1.4.1.10297.202.7000.6.3.2.1 |
egressBandwidthEntryThe entry of egress bandwidth EgressBandwidthEntry .1.3.6.1.4.1.10297.202.7000.6.3.2.1.1 |
egressBandwidthPortIndexThe port index of egress bandwidthro Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.1 |
egressBandwidthStateenable/disable egress bandwidth controlrw Enumeration .1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.2 |
egressBandwidthRaterate value, unit:16Kbpsrw Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.3 |
egressQueueBandwidthControl OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.6.3.3 |
egressqueueBandwidthTableThe table of egress queue bandwidth SEQUENCE OF EgressqueueBandwidthEntry .1.3.6.1.4.1.10297.202.7000.6.3.3.1 |
egressqueueBandwidthEntryThe entry of egress queue bandwidth EgressqueueBandwidthEntry .1.3.6.1.4.1.10297.202.7000.6.3.3.1.1 |
egressqueueBandwidthPortIndexThe port index of egress queue bandwidthro Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.1 |
egressqueueBandwidthQueueIndexThe queue index of egress queue bandwidthro Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.2 |
egressqueueBandwidthStateenable/disable egress bandwidth controrw Enumeration .1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.3 |
egressqueueBandwidthCirrate value, unit:16Kbpsrw Integer32 .1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.4 |
management OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7 |
lldp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.1 |
lldpEnabledEnable/Disable LLDP protocol on this switchrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.1.1 |
lldpPduDisableActionSelect LLDP PDU handling action to be filtered, bridging or
flooded when LLDP is globally disabled.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.1.2 |
lldpTransmissionIntervalThe interval at which frames are transmitted. LLDP transmission
interval multiplies holdtme multiplier should be smaller than 65535.
LLDP transmission delay should not be larger than LLDP transmission
interval * 0.25rw Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.3 |
lldpHoldtimeMultiplierThe multiplier on the transmit interval to assign to TTL. LLDP
transmission interval multiplies holdtme multiplier should be
smaller than 65535.rw Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.4 |
lldpReinitializationDelayThe delay before a re-initializationrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.5 |
lldpTransmitDelayThe delay after an LLDP frame is sent. LLDP transmission delay
should not be larger than LLDP transmission interval * 0.25rw Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.6 |
lldpPortConfTableThe table of LLDP port configuration SEQUENCE OF LldpPortConfEntry .1.3.6.1.4.1.10297.202.7000.7.1.7 |
lldpPortConfEntryThe entry of LLDP port configuration LldpPortConfEntry .1.3.6.1.4.1.10297.202.7000.7.1.7.1 |
lldpPortIndexThe port index of LLDP port configurationro Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.7.1.1 |
lldpPortStatethe transmission state of LLDP port interface.
Disable: Disable the transmission of LLDP PDUs.
RX Only: Receive LLDP PDUs only.
TX Only: Transmit LLDP PDUs only.
TX And RX: Transmit and receive LLDP PDUs both.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.1.7.1.2 |
lldpPortOptionalTLVsThe LLDP optional TLVs to be carriedrw Bits .1.3.6.1.4.1.10297.202.7000.7.1.7.1.3 |
lldpPortVlansThe VLAN name ID to be carried. User can inpu vlan such as:
1-2, 100.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.7.1.4 |
localDevice OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.1.8 |
lldpLocalDeviceChassisidsubtypeLLDP local device chassis ID subtypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.1 |
lldpLocalDeviceChassisIDLLDP local device chassis IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.2 |
lldpLocalDeviceSystemNameLLDP local device system namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.3 |
lldpLocalDeviceSystemDescriptionLLDP local device system descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.4 |
lldpLocalDeviceCapabilitiesSupportedLLDP local device capabilities supportedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.5 |
lldpLocalDeviceCapabilitiesEnabledLLDP local device capabilities enabledro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.6 |
lldpLocalDevicePortIDsubtypeLLDP local device port ID subtypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.7 |
lldpLocalPortStatusTableThe table of LLFP local port status SEQUENCE OF LldpLocalPortStatusEntry .1.3.6.1.4.1.10297.202.7000.7.1.8.8 |
lldpLocalPortStatusEntryThe entry of LLFP local port status LldpLocalPortStatusEntry .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1 |
lldpLocalPortIndexThe port index of LLDP local port statusro Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.1 |
lldpLocalPortStatusLLDP local port statusro Enumeration .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.2 |
lldpLocalPortChassisIDsubtypeLLDP local port chassis ID subtypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.3 |
lldpLocalPortChassisIDLLDP local port chassis IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.4 |
lldpLocalPortSystemnameLLDP local port system namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.5 |
lldpLocalPortSystemdescriptionLLDP local port system descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.6 |
lldpLocalPortSupportedsystemcapabilitiesLLDP local port supported system capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.7 |
lldpLocalPortEnablesystemcapabilitiesLLDP local port enable system capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.8 |
lldpLocalPortIDsubtypeLLDP local port ID subtypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.9 |
lldpLocalPortIDLLDP local port IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.10 |
lldpLocalPortDescriptionLLDP local port descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.11 |
lldpLocalPortManagementAddressLLDP local port management addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.12 |
lldpLocalPortAuto-negosupportedLLDP local port auto-nego supportedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.13 |
lldpLocalPortAuto-negoenabledLLDP local port auto-nego enabledro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.14 |
lldpLocalPortAuto-negoAdvertisedCapabilitiesLLDP local port auto-nego advertised capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.15 |
lldpLocalPortOperationMAUtypeLLDP local port operation MAU typero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.16 |
lldpLocalPortIeee8023MaxFrameSizeLLDP local port IEEE 802.3 max frame sizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.17 |
lldpLocalPortAggregationCapabilityLLDP local port aggregation capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.18 |
lldpLocalPortAggregationStatusLLDP local port aggregation statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.19 |
lldpLocalPortAggregationPortIDLLDP local port aggregation port IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.20 |
lldpLocalPortPvidLLDP local port PVIDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.21 |
lldpLocalPortVlanNameLLDP local port vlan namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.22 |
remoteDevice OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.1.9 |
lldpremoteDeviceTableThe table of LLDP remote device SEQUENCE OF LldpremoteDeviceEntry .1.3.6.1.4.1.10297.202.7000.7.1.9.1 |
lldpremoteDeviceEntryThe entry of LLDP remote device LldpremoteDeviceEntry .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1 |
lldpremoteDeviceIndexThe index of LLDP remote devicero Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.1 |
lldpremoteDeviceLocalPortLLDP remote device local portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.2 |
lldpremoteDeviceChassisIDsubtypeLLDP remote device chassis ID subtypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.3 |
lldpremoteDeviceChassisIDLLDP remote device chassis IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.4 |
lldpremoteDevicePortIDsubtypeLLDP remote device port ID subtypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.5 |
lldpremoteDevicePortIDLLDP remote device port IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.6 |
lldpremoteDeviceSystemNameLLDP remote device system namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.7 |
lldpremoteDeviceTimetoliveLLDP remote device time to livero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.8 |
lldpremoteDeviceEntryIndexLLDP remote device entry indexro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.9 |
lldpremoteDevicePortDescriptionLDP remote device port descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.10 |
lldpremoteDeviceSystemdescriptionLLDP remote device system descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.11 |
lldpremoteDeviceSupportedsystemcapabilitiesLLDP remote device supported syste, capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.12 |
lldpremoteDeviceEnablesystemcapabilitiesLLDP remote device enable system capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.13 |
lldpremoteDeviceManagementAddressLLDP remote device management addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.14 |
lldpremoteDeviceAuto-negosupportedLLDP remote device auto-nego supportedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.15 |
lldpremoteDeviceAuto-negoenabledLLDP remote device auto-nego enabledro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.16 |
lldpremoteDeviceAuto-negoAdvertisedCapabilitiesLLDP remote device auto-nego advertised capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.17 |
lldpremoteDeviceOperationMAUtypeLLDP remote device operation MAU typero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.18 |
lldpremoteDeviceMdipowersupportportclassLLDP remote device PSE MDI power support classro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.19 |
lldpremoteDevicePsemdipowersupportLLDP remote device PSE MDI power supportro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.20 |
lldpremoteDevicePsemdipowerstatusLLDP remote device PSE MDI power statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.21 |
lldpremoteDevicePsepowerpaircontrolabilityLLDP remote device PSE power pair control abilityro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.22 |
lldpremoteDevicePsepowerpairLLDP remote device PSE power pairro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.23 |
lldpremoteDevicePsepowerclassLLDP remote device PSE power classro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.24 |
lldpremoteDeviceIeee8023MaxFrameSizeLLDP remote device IEEE 802.3 Max frame sizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.25 |
lldpremoteDeviceAggregationCapabilityLLDP remote device aggregation capabilitiesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.26 |
lldpremoteDeviceAggregationStatusLLDP remote device aggregation statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.27 |
lldpremoteDeviceAggregationPortIDLLDP remote device aggregation Port IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.28 |
lldpremoteDevicePvidLLDP remote device PVIDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.29 |
lldpremoteDeviceVlanNameLLDP remote device VLAN namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.30 |
lldpremoteDeviceRowStatusLLDP remote device device rowstatusrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.31 |
lldpOverloadingTableThe table of LLDP overlaoding SEQUENCE OF LLDPOverloadingEntry .1.3.6.1.4.1.10297.202.7000.7.1.10 |
lldpOverloadingEntryThe entry of LLDP overlaoding LLDPOverloadingEntry .1.3.6.1.4.1.10297.202.7000.7.1.10.1 |
lldpOverloadingPortIndexThe port index of LLDP overlaodingro Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.10.1.1 |
lldpOverloadingTotalLLDP overloading totalro Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.10.1.2 |
lldpOverloadingLeftToSendLLDP overloading left to sendro Integer32 .1.3.6.1.4.1.10297.202.7000.7.1.10.1.3 |
lldpOverloadingStatusLLDP overloading statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.10.1.4 |
lldpOverloadingMandatoryTLVsLLDP overloading mandatory TLVsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.10.1.5 |
lldpOverloadingIeee8023TLVsLLDP overloading IEEE 802.3 TLVsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.10.1.6 |
lldpOverloadingOptionalTLVsLLDP overloading optional TLVsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.10.1.7 |
lldpOverloadingIeee8021TLVsLLDP overloading IEEE 802.1 TLVsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.1.10.1.8 |
snmp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.2 |
snmpStateSNMP golbal settingrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.1 |
snmpCommunityTableThe table of SNMP community SEQUENCE OF CommunityEntry .1.3.6.1.4.1.10297.202.7000.7.2.2 |
snmpCommunityEntryThe entry of SNMP community CommunityEntry .1.3.6.1.4.1.10297.202.7000.7.2.2.1 |
snmpCommunityIndexThe index of SNMP communityro Integer32 .1.3.6.1.4.1.10297.202.7000.7.2.2.1.1 |
snmpCommunityStringThe name of SNMP communityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.2.1.2 |
snmpCommunityAccessRightSNMP access moderw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.2.1.3 |
snmpCommunityRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.2.1.99 |
snmpTrapHostTableThe table of SNMP trap host SEQUENCE OF SnmpTrapHostEntry .1.3.6.1.4.1.10297.202.7000.7.2.3 |
snmpTrapHostEntryThe entry of SNMP trap host SnmpTrapHostEntry .1.3.6.1.4.1.10297.202.7000.7.2.3.1 |
snmpTrapHostIndexThe index of SNMP trap hostro Integer32 .1.3.6.1.4.1.10297.202.7000.7.2.3.1.1 |
snmpTrapHostIpaddressThe ipaddress or hostname of SNMP trap hostrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.3.1.2 |
snmpTrapHostCommunityNameThe community name of SNMP trap hostrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.3.1.3 |
snmpTrapHostVersionThe SNMP version of SNMP trap hostrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.3.1.4 |
snmpTrapHostRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.3.1.99 |
snmpv3UserTableThe table of SNMPv3 user SEQUENCE OF SNMPv3UserEntry .1.3.6.1.4.1.10297.202.7000.7.2.4 |
snmpv3UserEntryThe entry of SNMPv3 user SNMPv3UserEntry .1.3.6.1.4.1.10297.202.7000.7.2.4.1 |
snmpv3UserIndexThe index of SNMPv3 userro Integer32 .1.3.6.1.4.1.10297.202.7000.7.2.4.1.1 |
snmpv3UserNameThe name of SNMPv3 user. Please input more than 8 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.4.1.2 |
snmpv3UserAccessRightThe access right of SNMPv3 userrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.4.1.3 |
snmpv3UserAuthProtocolThe authentication protocol of SNMPv3 userrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.4.1.4 |
snmpv3UserAuthPasswordThe authentication password of SNMPv3 user.The password
must be at least eight characters long.The password can
include alphabetic, numeric, and '-', '_', '.'rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.4.1.5 |
snmpv3UserPrivProtocolThe priviledge protocol of SNMPv3 userrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.4.1.6 |
snmpv3UserPrivPasswordThe priviledge password of SNMPv3 user.The password
must be at least eight characters long.The password can
include alphabetic, numeric, and '-', '_', '.'rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.4.1.7 |
snmpv3UserRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.2.4.1.99 |
snmpv3EngineIDThe snmpv3 engine IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.2.5 |
poe OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.3 |
poeSystemSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.3.1 |
poeFwVersionThe PoE firmware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.3.1.1 |
poeMaxPowerAvailableThe maximum power available in PoE.
actual maximun power value is different according Switch Model.
ex : EKI-7710G maximun poe power value is 120W.
EKI-7712G maximun poe power value is 240W.rw INTEGER .1.3.6.1.4.1.10297.202.7000.7.3.1.2 |
poeActualPowerConsumptionThe actual power consumption in PoEro INTEGER UNITS "W" .1.3.6.1.4.1.10297.202.7000.7.3.1.3 |
poeOverLoadDisconnectThe overload disconnect mode in PoErw Enumeration .1.3.6.1.4.1.10297.202.7000.7.3.1.4 |
poePortSettingTableThe table of PoE port setting SEQUENCE OF PoEPortSettingEntry .1.3.6.1.4.1.10297.202.7000.7.3.2 |
poePortSettingEntryThe table of PoE port setting PoEPortSettingEntry .1.3.6.1.4.1.10297.202.7000.7.3.2.1 |
poePortIndexThe index of PoE port settingro Integer32 .1.3.6.1.4.1.10297.202.7000.7.3.2.1.1 |
poePortStateThe state of PoE portrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.3.2.1.2 |
poePortLegacyThe legacy of PoE portrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.3.2.1.3 |
poePortPowerLimitClassThe power limit form classification of PoE portrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.3.2.1.4 |
poePortPriorityThe priority of PoE portrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.3.2.1.5 |
poePortPowerLimitThe power limit of PoE portrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.3.2.1.6 |
poePortStatusTableThe table of PoE port status SEQUENCE OF PoEPortStatusEntry .1.3.6.1.4.1.10297.202.7000.7.3.3 |
poePortStatusEntryThe table of PoE port status PoEPortStatusEntry .1.3.6.1.4.1.10297.202.7000.7.3.3.1 |
poePortStatusIndexThe index of PoE port statusro Integer32 .1.3.6.1.4.1.10297.202.7000.7.3.3.1.1 |
poePortCurrentThe current of PoE portro DisplayString UNITS "mA" .1.3.6.1.4.1.10297.202.7000.7.3.3.1.2 |
poePortVoltageThe voltage of PoE portro DisplayString UNITS "V" .1.3.6.1.4.1.10297.202.7000.7.3.3.1.3 |
poePortPowerThe power of PoE portro DisplayString UNITS "W" .1.3.6.1.4.1.10297.202.7000.7.3.3.1.4 |
poePortTempThe temperature of PoE portro DisplayString UNITS "C" .1.3.6.1.4.1.10297.202.7000.7.3.3.1.5 |
tcpModbus OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.4 |
tcpModbusStateThe state of TCP Modbusrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.4.1 |
tcpModbusTimeoutThe time out of TCP Modbusrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.4.2 |
dhcpServer OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.5 |
dhcpServerStateThe state of DHCP Serverrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.1 |
dhcpServerGlobalSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.5.2 |
dhcpServerLeaseTimeThe lease time of DHCP serverrw INTEGER .1.3.6.1.4.1.10297.202.7000.7.5.2.1 |
dhcpServerLowIPThe low IP address of DHCP serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.2.2 |
dhcpServerHighIPThe high IP address of DHCP serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.2.3 |
dhcpServerSubmaskThe subnet mask of DHCP serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.2.4 |
dhcpServerGatewayThe gateway of DHCP serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.2.5 |
dhcpServerDNSThe DNS of DHCP serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.2.6 |
dhcpServerStatusIf user set golbal setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.2.7 |
dhcpServerClearIpPoolClear IP pool in DHCP Serverrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.2.8 |
dhcpServerPortTableThe table of DHCP server port setting SEQUENCE OF DHCPServerPortEntry .1.3.6.1.4.1.10297.202.7000.7.5.3 |
dhcpServerPortEntryThe entry of DHCP server port setting DHCPServerPortEntry .1.3.6.1.4.1.10297.202.7000.7.5.3.1 |
dhcpServerPortIndexThe index of DHCP server port settingro Integer32 .1.3.6.1.4.1.10297.202.7000.7.5.3.1.1 |
dhcpServerPortLowIPThe low IP address of DHCP server portrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.3.1.2 |
dhcpServerPortHighIPThe high IP address of DHCP server portrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.3.1.3 |
dhcpServerPortMaskThe subnet mask of DHCP server portrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.3.1.4 |
dhcpServerPortGWThe gateway of DHCP server portrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.3.1.5 |
dhcpServerPortDNSThe DNS of DHCP server portrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.3.1.6 |
dhcpServerPortStatusIf user set port setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.3.1.7 |
dhcpServerPortClearClear IP poll on DHCP server portrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.3.1.8 |
dhcpServerOpt82TableThe table of DHCP option 82 setting SEQUENCE OF DHCPServerOpt82Entry .1.3.6.1.4.1.10297.202.7000.7.5.4 |
dhcpServerOpt82EntryThe entry of DHCP option 82 setting DHCPServerOpt82Entry .1.3.6.1.4.1.10297.202.7000.7.5.4.1 |
dhcpServerOpt82IndexThe index of DHCP server option 82 settingro Integer32 .1.3.6.1.4.1.10297.202.7000.7.5.4.1.1 |
dhcpServerOpt82CircuitIDFormatThe circuit ID format of DHCP option 82rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.4.1.2 |
dhcpServerOpt82CircuitIDThe circuit ID of DHCP option 82rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.4.1.3 |
dhcpServerOpt82RemoteIDFormatThe remote ID format of DHCP option 82rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.4.1.4 |
dhcpServerOpt82RemoteIDThe remote ID of DHCP option 82rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.4.1.5 |
dhcpServerOpt82LowIPThe low IP address of DHCP option 82rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.4.1.6 |
dhcpServerOpt82HighIPThe high IP address of DHCP option 82rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.4.1.7 |
dhcpServerOpt82MaskThe subnet mask of DHCP option 82rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.4.1.8 |
dhcpServerOpt82GWThe gateway of DHCP option 82rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.4.1.9 |
dhcpServerOpt82DNSThe DNS of DHCP option 82rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.4.1.10 |
dhcpServerOpt82StatusIf user set option82 setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.4.1.11 |
dhcpServerOpt82ClearClear IP poll on DHCP option 82rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.4.1.12 |
dhcpServerLeaseTableThe table of DHCP server lease entry SEQUENCE OF DHCPServerLeaseEntry .1.3.6.1.4.1.10297.202.7000.7.5.5 |
dhcpServerLeaseEntryThe entry of DHCP server lease entry DHCPServerLeaseEntry .1.3.6.1.4.1.10297.202.7000.7.5.5.1 |
dhcpServerLeaseIndexThe index of DHCP server lease entryro Integer32 .1.3.6.1.4.1.10297.202.7000.7.5.5.1.1 |
dhcpServerLeaseIpThe IP address of DHCP server lease entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.5.1.2 |
dhcpServerLeaseClientMacThe client MAC of DHCP server lease entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.5.1.3 |
dhcpServerLeaseStartTimeThe start time of DHCP server lease entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.5.1.4 |
dhcpServerLeaseEndTimeThe end time of DHCP server lease entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.5.1.5 |
dhcpServerLeaseTypeThe type of DHCP server lease entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.5.1.6 |
dhcpServerRestartRestart DHCP Serverrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.6 |
dhcpServerVlanTableThe table of DHCP VLAN setting SEQUENCE OF DHCPServerVlanEntry .1.3.6.1.4.1.10297.202.7000.7.5.7 |
dhcpServerVlanEntryThe entry of DHCP VLAN setting DHCPServerVlanEntry .1.3.6.1.4.1.10297.202.7000.7.5.7.1 |
dhcpServerVlanIndexThe index of DHCP server VLAN settingro Integer32 .1.3.6.1.4.1.10297.202.7000.7.5.7.1.1 |
dhcpServerVlanIdThe VLAN ID of DHCP VLAN settingrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.5.7.1.2 |
dhcpServerVlanLowIPThe low IP address of DHCP VLANrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.7.1.3 |
dhcpServerVlanHighIPThe high IP address of DHCP VLANrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.7.1.4 |
dhcpServerVlanMaskThe subnet mask of DHCP VLANrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.7.1.5 |
dhcpServerVlanGWThe gateway of DHCP VLANrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.7.1.6 |
dhcpServerVlanDNSThe DNS of DHCP VLANrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.7.1.7 |
dhcpServerVlanStatusIf user set VLAN setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.7.1.8 |
dhcpServerVlanClearClear IP poll on DHCP VLANrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.7.1.9 |
dhcpServerClientMacTableThe table of DHCP client mac setting SEQUENCE OF DhcpServerClientMacEntry .1.3.6.1.4.1.10297.202.7000.7.5.8 |
dhcpServerClientMacEntryThe entry of DHCP server client mac setting DhcpServerClientMacEntry .1.3.6.1.4.1.10297.202.7000.7.5.8.1 |
dhcpServerClientMacEntryIDThe index of DHCP server client mac entryrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.5.8.1.1 |
dhcpServerClientMacEntryMacThe MAC address of DHCP server client mac entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.5.8.1.2 |
dhcpServerClientMacEntryIPThe IP address of DHCP server client mac entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.8.1.3 |
dhcpServerClientMacEntryMaskThe subnet mask of DHCP DHCP server client mac entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.8.1.4 |
dhcpServerClientMacEntryGWThe gateway of DHCP DHCP server client mac entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.8.1.5 |
dhcpServerClientMacEntryDNSThe DNS of DHCP DHCP server client mac entry.rw IpAddress .1.3.6.1.4.1.10297.202.7000.7.5.8.1.6 |
dhcpServerClientMacEntryRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.5.8.1.7 |
smtpClient OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.6 |
smtpActiveProfileThe active profile of SMTP clientrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.6.1 |
smtpProfileTableThe table of SMTP client profile SEQUENCE OF SMTPProfileEntry .1.3.6.1.4.1.10297.202.7000.7.6.2 |
smtpProfileEntryThe entry of SMTP client profile SMTPProfileEntry .1.3.6.1.4.1.10297.202.7000.7.6.2.1 |
smtpProfileIndexThe index of SMTP client profilero Integer32 .1.3.6.1.4.1.10297.202.7000.7.6.2.1.1 |
smtpServerIpThe SMTP server IPrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.2 |
smtpServerPortThe SMTP server portro Integer32 .1.3.6.1.4.1.10297.202.7000.7.6.2.1.3 |
smtpSenderMailThe SMTP sender mailrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.4 |
smtpTargetMail1The SMTP target mail 1rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.5 |
smtpTargetMail2The SMTP target mail 2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.6 |
smtpTargetMail3The SMTP target mail 3rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.7 |
smtpTargetMail4The SMTP target mail 4rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.8 |
smtpTargetMail5The SMTP target mail 5rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.9 |
smtpTargetMail6The SMTP target mail 6rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.10 |
smtpTargetMail7The SMTP target mail 7rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.11 |
smtpTargetMail8The SMTP target mail 8rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.6.2.1.12 |
rmon OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.7 |
rmonStatisticsTableThe table of RMON Statistics SEQUENCE OF RMONStatisticsEntry .1.3.6.1.4.1.10297.202.7000.7.7.1 |
rmonStatisticsEntryThe entry of RMON Statistics RMONStatisticsEntry .1.3.6.1.4.1.10297.202.7000.7.7.1.1 |
rmonStatisticsIndexThe index of RMON Statisticsrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.1 |
rmonStatisticsPortThe port number of RMON Statisticsrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.2 |
rmonStatisticsDropEventsThe drop events of RMON Statisticsro Counter32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.3 |
rmonStatisticsOctetsThe octets of RMON Statisticsro Counter32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.4 |
rmonStatisticsPacketsThe packets of RMON Statisticsro Counter32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.5 |
rmonStatisticsBroadcastThe broadcast of RMON Statisticsro Counter32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.6 |
rmonStatisticsMulticastThe multicast of RMON Statisticsro Counter32 .1.3.6.1.4.1.10297.202.7000.7.7.1.1.7 |
rmonStatisticsOwnerThe owner of RMON Statisticsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.1.1.8 |
rmonStatisticsRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.7.1.1.9 |
rmonHistoryTableThe table of RMON history SEQUENCE OF RMONHistoryEntry .1.3.6.1.4.1.10297.202.7000.7.7.2 |
rmonHistoryEntryThe entry of RMON history RMONHistoryEntry .1.3.6.1.4.1.10297.202.7000.7.7.2.1 |
rmonHistoryIndexThe index of RMON historyrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.2.1.1 |
rmonHistoryPortThe port number of RMON historyrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.2.1.2 |
rmonHistoryBucketsRequestThe buckets requested of RMON historyrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.2.1.3 |
rmonHistoryIntervalThe index of RMON historyrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.2.1.5 |
rmonHistoryOwnerThe port number of RMON historyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.2.1.6 |
rmonHistoryRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.7.2.1.7 |
rmonAlarmTableThe table of RMON alarm SEQUENCE OF RMONAlarmEntry .1.3.6.1.4.1.10297.202.7000.7.7.3 |
rmonAlarmEntryThe entry of RMON alarm RMONAlarmEntry .1.3.6.1.4.1.10297.202.7000.7.7.3.1 |
rmonAlarmIndexThe index of RMON alarmrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.3.1.1 |
rmonAlarmIntervalThe interval of RMON alarmrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.3.1.2 |
rmonAlarmVariableThe variable of RMON alarmrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.3.1.3 |
rmonAlarmSampleTypeThe sample type of RMON alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.7.3.1.4 |
rmonAlarmRisingThresholdThe rising threshold of RMON alarmrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.3.1.5 |
rmonAlarmFallingThresholdThe falling threshold of RMON alarmrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.3.1.6 |
rmonAlarmRisingEventIndexThe rising event index of RMON alarmrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.3.1.7 |
rmonAlarmFallingEventIndexThe falling event indx of RMON alarmrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.3.1.8 |
rmonAlarmOwnerThe owner of RMON alarmrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.3.1.9 |
rmonAlarmRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.7.3.1.10 |
rmonEventTableThe table of RMON event SEQUENCE OF RMONEventEntry .1.3.6.1.4.1.10297.202.7000.7.7.4 |
rmonEventEntryThe entry of RMON event RMONEventEntry .1.3.6.1.4.1.10297.202.7000.7.7.4.1 |
rmonEventIndexThe index of RMON eventrw Integer32 .1.3.6.1.4.1.10297.202.7000.7.7.4.1.1 |
rmonEventDescriptionThe description of RMON eventrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.4.1.2 |
rmonEventTypeThe type of RMON eventrw Enumeration .1.3.6.1.4.1.10297.202.7000.7.7.4.1.3 |
rmonEventCommunityThe community of RMON eventrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.4.1.4 |
rmonEventOwnerThe owner of RMON eventrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.7.7.4.1.5 |
rmonEventRowStatusUser can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.7.4.1.7 |
ntp OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.7.8 |
ntpServerenable/disable NTP server.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.8.1 |
ntpManualTimeenable/disable NTP manual time.rw Enumeration .1.3.6.1.4.1.10297.202.7000.7.8.2 |
ntpServerTableThe table of NTP server SEQUENCE OF NtpServerEntry .1.3.6.1.4.1.10297.202.7000.7.8.3 |
ntpServerEntryThe entry of NTP server NtpServerEntry .1.3.6.1.4.1.10297.202.7000.7.8.3.1 |
ntpServerIndexThe index of NTP serverro Integer32 .1.3.6.1.4.1.10297.202.7000.7.8.3.1.1 |
ntpServerIpThe ip address of NTP serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.7.8.3.1.2 |
diagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8 |
copperTest OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.1 |
portNumberThe port ID for copper testrw INTEGER .1.3.6.1.4.1.10297.202.7000.8.1.1 |
copperTestActionCopper test actionrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.1.2 |
copperTestResult OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.1.3 |
resultPortThe copper test port IDro INTEGER .1.3.6.1.4.1.10297.202.7000.8.1.3.1 |
channelAThe copper test result for channel Aro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.2 |
cableLengthAThe copper test result for cable length Aro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.3 |
channelBThe copper test result for channel Bro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.4 |
cableLengthBThe copper test result forcable length Bro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.5 |
channelCThe copper test result for channel Cro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.6 |
cableLengthCThe copper test result for cable length Cro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.7 |
channelDThe copper test result for channel Dro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.8 |
cableLengthDThe copper test result for cable length Dro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.9 |
channelRxThe copper test result for channel Rxro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.10 |
cableLengthRxThe copper test result for cable length Rxro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.11 |
channelTxThe copper test result for channel Txro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.12 |
cableLengthTxThe copper test result for cable length Txro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.1.3.13 |
pingTest OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.2 |
pingIPAddressThe IP address or hostname of ping targetrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.2.1 |
pingCountHow many times to send ping request packetsrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.2.2 |
pingIntervalTime interval between each ping request packetsrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.2.3 |
pingSizeThe size of ping packetrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.2.4 |
pingActionThe ping actionrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.2.5 |
pingResultAfter ping finished, results will show in this OIDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.2.6 |
ipv6pingTest OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.3 |
pingIPv6AddressThe IPv6 address of ping targetrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.3.1 |
pingIPv6CountHow many times to send ping request packetrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.3.2 |
pingIPv6IntervalTime interval between each ping request packetrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.3.3 |
pingIPv6SizeThe size of ping packetrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.3.4 |
pingIPv6ActionThe IPv6 ping actionrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.3.5 |
pingIPv6ResultAfter ping finished, results will show in this fieldro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.3.6 |
loggingSetting OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.4 |
loggingServiceEnable/Disable logging systemrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.4.1 |
localLoggingTableThe table of local logging SEQUENCE OF LocalLoggingEntry .1.3.6.1.4.1.10297.202.7000.8.4.2 |
localLoggingEntryThe entry of local logging LocalLoggingEntry .1.3.6.1.4.1.10297.202.7000.8.4.2.1 |
localLoggingIndexThe index of local loggingro Integer32 .1.3.6.1.4.1.10297.202.7000.8.4.2.1.1 |
bufferedtargetThe target to store log message
Buffered: Store log messages in device buffer.
File: Store log message in file.
Console: Show the log message on console.ro Enumeration .1.3.6.1.4.1.10297.202.7000.8.4.2.1.2 |
localLoggingStatusEnable/Disable status the logging systemro Enumeration .1.3.6.1.4.1.10297.202.7000.8.4.2.1.3 |
localLoggingSeveritySeverity of log message which will be storedrw Bits .1.3.6.1.4.1.10297.202.7000.8.4.2.1.4 |
remoteloggingTableThe table of remote logging SEQUENCE OF RemoteloggingEntry .1.3.6.1.4.1.10297.202.7000.8.4.3 |
remoteloggingEntryThe entry of remote logging RemoteloggingEntry .1.3.6.1.4.1.10297.202.7000.8.4.3.1 |
remoteloggingIndexThe index of remote loggingro Integer32 .1.3.6.1.4.1.10297.202.7000.8.4.3.1.1 |
remoteloggingAddressThe IP address of remote log serverrw IpAddress .1.3.6.1.4.1.10297.202.7000.8.4.3.1.2 |
remoteloggingPortThe port number of remote log serverrw Integer32 .1.3.6.1.4.1.10297.202.7000.8.4.3.1.3 |
remoteloggingSeverityThe severity of log messages which will be sentrw Bits .1.3.6.1.4.1.10297.202.7000.8.4.3.1.4 |
remoteloggingFacilityThe facility of log messages which will be sentrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.4.3.1.5 |
remoteloggingRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.8.4.3.1.99 |
factoryDefault OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.5 |
factoryDefaultActionuser to restore switch to factory defaultrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.5.1 |
factoryDefaultKeepFlagKeep setting when switch is restore to factory default.rw Bits .1.3.6.1.4.1.10297.202.7000.8.5.2 |
reboot OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.6 |
rebootActionuser to reboot the switchrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.6.1 |
dhcpAutoProvision OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.7 |
dhcpAutoProvisionEnableThe status of DHCP auto provisionrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.7.1 |
ledIndication OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.8.8 |
ledAlarmStateEnable/Disable LED alarmrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.8.1 |
ledPowerFailureEventEnable/Disable LED power failure eventrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.8.2 |
ledFiberLinkdownEventEnable/Disable LED fiber port Link down eventrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.8.3 |
ledPortLinkdownEventEnable/Disable LED port Link down eventrw Enumeration .1.3.6.1.4.1.10297.202.7000.8.8.4 |
ledPortLinkdownEventPortThe member ports of LED port Link down eventrw Bits .1.3.6.1.4.1.10297.202.7000.8.8.5 |
ledEventInfoTableThe table of led event info SEQUENCE OF LedEventInfoEntry .1.3.6.1.4.1.10297.202.7000.8.8.6 |
ledEventInfoEntryThe entry of led event info LedEventInfoEntry .1.3.6.1.4.1.10297.202.7000.8.8.6.1 |
ledEventIndexThe index of led event inforo Integer32 .1.3.6.1.4.1.10297.202.7000.8.8.6.1.1 |
ledTypeThe type of led event inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.8.6.1.2 |
ledEventThe event of led event inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.8.6.1.3 |
ledStateThe state of led event inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.8.8.6.1.4 |
ledErrorTimesThe error times of led event inforo Integer32 .1.3.6.1.4.1.10297.202.7000.8.8.6.1.5 |
maintenance OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9 |
backupManager OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9.1 |
backupMethodThe method of backup filerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.1.1 |
backupServerIPThe IP address of the TFTP serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.1.2 |
backupTypeThe backup configuration typerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.1.3 |
backupImageThe backup firmware imagerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.1.4 |
backupActionThe backup actionrw Enumeration .1.3.6.1.4.1.10297.202.7000.9.1.5 |
upgradeManager OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9.2 |
upgradeMethodThe upgrade file methodrw Enumeration .1.3.6.1.4.1.10297.202.7000.9.2.1 |
upgradeServerIPThe server IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.2.2 |
upgradeFileNameThe upgrade file namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.2.3 |
upgradeTypeThe upgrade typerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.2.4 |
upgradeImageThe uprade firmware imagerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.2.5 |
upgradeActionThe upgrade actionrw Enumeration .1.3.6.1.4.1.10297.202.7000.9.2.6 |
upgradeStatusThe upgrade statusro Enumeration .1.3.6.1.4.1.10297.202.7000.9.2.7 |
dualImage OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9.3 |
activeImageThe active imagerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.3.1 |
imageInfoTableThe table of image info SEQUENCE OF ImageInfoEntry .1.3.6.1.4.1.10297.202.7000.9.3.2 |
imageInfoEntryThe entry of image info ImageInfoEntry .1.3.6.1.4.1.10297.202.7000.9.3.2.1 |
flashPartitionThe FLASH partitionro Integer32 .1.3.6.1.4.1.10297.202.7000.9.3.2.1.1 |
imageNameThe image namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.3.2.1.2 |
imageSizeThe image sizero Integer32 .1.3.6.1.4.1.10297.202.7000.9.3.2.1.3 |
createdTimeThe FW creation timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.3.2.1.4 |
imageVersionThe image versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.3.2.1.5 |
configurationManager OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9.4 |
sourceFileThe configuration source filerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.4.1 |
destinationFileThe configuration destination filerw Enumeration .1.3.6.1.4.1.10297.202.7000.9.4.2 |
saveConfigurationSave the current configurationrw Enumeration .1.3.6.1.4.1.10297.202.7000.9.4.3 |
accountManager OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9.5 |
localUserTableThe table of local user SEQUENCE OF LocalUserEntry .1.3.6.1.4.1.10297.202.7000.9.5.1 |
localUserEntryThe entry of local user LocalUserEntry .1.3.6.1.4.1.10297.202.7000.9.5.1.1 |
localUserIndexThe index of local userro Integer32 .1.3.6.1.4.1.10297.202.7000.9.5.1.1.1 |
localUserNameThe user name of local userrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.5.1.1.2 |
localUserPasswordTypeThe pasword type of local userrw Enumeration .1.3.6.1.4.1.10297.202.7000.9.5.1.1.3 |
localUserPasswordThe password of local userrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.9.5.1.1.4 |
localUserPrivilegeTypeThe privilege type of local userrw Enumeration .1.3.6.1.4.1.10297.202.7000.9.5.1.1.5 |
localUserRowStatusUser can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry.rw Enumeration .1.3.6.1.4.1.10297.202.7000.9.5.1.1.99 |
nKey OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.9.6 |
nKeyAutoModeThe auto mode of N-Key.rw Enumeration .1.3.6.1.4.1.10297.202.7000.9.6.1 |
nKeyStatusSelect N-key is idle or
backup the current configurations to N-Key or
restore N-Key's configurations to switch.
The fourth option is read-only.rw Enumeration .1.3.6.1.4.1.10297.202.7000.9.6.2 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.99 |
trapObject OBJECT IDENTIFIER .1.3.6.1.4.1.10297.202.7000.99.1 |
ddmiAlarmDescrThe description of DDMI trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10297.202.7000.99.1.1 |
xRingMasterStatusThe status of XRing Pro Master.ro Enumeration .1.3.6.1.4.1.10297.202.7000.99.1.2 |
ddmiAlarmWarningThe DDMI trap NOTIFICATION-TYPE .1.3.6.1.4.1.10297.202.7000.99.2 |
xRingProMasterChangeThis trap is sent if XRing Pro master change NOTIFICATION-TYPE .1.3.6.1.4.1.10297.202.7000.99.3 |
stpStateChangeThis trap is sent if spanning tree port state change to blocking or forwarding NOTIFICATION-TYPE .1.3.6.1.4.1.10297.202.7000.99.5 |