ADTX-RAID-AVCL-S2-MIB
AI MIB Summary
The ADTX-RAID-AVCL-S2-MIB module enables SNMP-based monitoring and management of the ADTX Virtual Console for the L Series, specifically tracking virtual console session states, port availability, and connection health metrics.
The MIB module for the ADTX Virtual Console for L Series.
Main OID:
avcl.1.3.6.1.4.1.2653.3.1.1
63
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
avclThe MIB module for the ADTX Virtual Console for L Series. MODULE-IDENTITY .1.3.6.1.4.1.2653.3.1.1 |
avclEventsThe events for AVC-L as detected by the daemon. OBJECT IDENTIFIER .1.3.6.1.4.1.2653.3.1.1.0 |
daemonEventThis trap is sent if SNMP notification is enabled for any or all of the critical (needs troubleshooting) events described at 'avclEventInfo' above. There are other events but are categorized as status-changed events that don't need troubleshooting, just for informational purposes. NOTIFICATION-TYPE .1.3.6.1.4.1.2653.3.1.1.0.1 |
avclVersionThe software version of AVC-L basing on the Daemon as the data gathered is based on it. eg. '4.0 (for AVC-L 4.0)'ro AvcString .1.3.6.1.4.1.2653.3.1.1.1 |
avclOSThe Operating System of where the AVC-L Daemon resides. eg. 'Windows 2000 (Service Pack 3)'ro AvcString .1.3.6.1.4.1.2653.3.1.1.2 |
avclHostThe IP address or hostname of the system where the AVC-L daemon resides. eg. '172.16.16.204'ro AvcString .1.3.6.1.4.1.2653.3.1.1.3 |
avclNumOfDevicesThe number of L devices that the AVC-L Daemon is currently connected. eg. 2ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.4 |
avclEventInfoThis object will show the most recently sent 'critical' event or trap. Events/Traps can be sent by the AVC-L Daemon if SNMP notification is enabled in the Daemon's configuration file. This file can be configured thru the AVC-L Client. Value can be one of the following phrases: 'xxx Serial Number: yyy ADTX ArrayMasStor IP zzz device not accessible.' - this means that the device is disconnected, accidental or otherwise, and needs to be reconnected. 'xxx Serial Number: yyy IP zzz Array nn: sss ==> Exposed.' 'xxx Serial Number: yyy IP zzz Array nn: sss ==> Invalidated Protected Space.' - where: nn - array number sss - any status other than either 'Exposed' or 'Invalidated Protected Space' This means that the array's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Array nn Lun mm: sss ==> Data Lost.' 'xxx Serial Number: yyy IP zzz Array nn Lun mm: sss ==> Exposed.' - where: nn - array number mm - lun number sss - any status other than either 'Data Lost' or 'Exposed' This means that the lun's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Failed.' 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Offline.' 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Missing.' 'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Blank.' - where: ll - spare number sss - any status other than either 'Failed', 'Offline', 'Missing', or 'Blank' This means that the spare's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Failed.' 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Offline.' 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Missing.' 'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Blank.' - where: kk - disk/hdd number sss - any status other than either 'Failed', 'Offline', 'Missing', or 'Blank' This means that the disk's status changed to fail. Contact support. 'xxx Serial Number: yyy IP zzz Component jj: sss ==> Broken.' 'xxx Serial Number: yyy IP zzz Component jj: sss ==> Not Available.' - where: jj - disk/hdd number sss - any status other than either 'Broken' or 'Not Available' This means that the component's status changed to fail. Contact support. 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: abnormally ended.' 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: terminated due to power off.' 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: source size greater than destination.' 'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: actual source size is lesser than specified size.' - where: ii - source lun hh - target lun This means that the instant copy failed and the data on target lun may be corrupted. Contact support. where: xxx - 'avcdaemon' or 'AVC Monitor Daemon - WinNT' yyy - serial number of the device concerned, eg. 'S000023' zzz - the IP address of the device concerned, eg. '172.16.16.190' The above event values are only for the critical events. There are other events that are more for informational purposes only.ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.5 |
avclDeviceInformationTableThis group (table) provides information about the L devices that are currently connected to the AVC-L Daemon SEQUENCE OF AvclDeviceInformationEntry .1.3.6.1.4.1.2653.3.1.1.6 |
avclDeviceInformationEntry AvclDeviceInformationEntry .1.3.6.1.4.1.2653.3.1.1.6.1 |
avclDeviceIndexThe index number of the L Device pertaining to this table. eg. 1ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.1 |
avclDeviceIPIP address of the specific L device queried eg. '172.16.16.190'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.2 |
avclDeviceSystemVersionThe device's subsystem version. eg. '7.2'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.3 |
avclDeviceManufacturerThe device's manufacturer name from the Inquiry command info eg. 'ADTX'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.4 |
avclDeviceProductNameThe device's product name from the Inquiry command info eg. 'AXRR-L'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.5 |
avclDeviceRevisionLevelThe revision level of the device controller's microcode/firmware from the Inquiry command info. eg. 'L25X'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.6 |
avclDeviceSerialNumberThe device's serial number from the Inquiry command info. eg. 'S000023'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.7 |
avclDeviceDateThe controller's system date of the L device. eg. 'Mar 7, 2003'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.8 |
avclDeviceTimeThe controller's system time of the L device, in 24-hr format. eg. '14:35'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.9 |
avclDeviceAssignedSpareThe device's global spare assignment. Can be any of the ff.: - No Assigned Spare - (numerical value in string) eg. 'No Assigned Spare'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.10 |
avclDeviceInitiatorModeShows if the device is in Initiator mode or not. Can be any of the ff.: - Enabled - Disabled eg. 'Disabled'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.11 |
avclDeviceInstantCopyLicenseShows the license description for device Instant Copy. Can be any of the ff.: - Permanent Instant Copy - Temporary Instant Copy (# of days remaining) - No License eg. 'No License'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.12 |
avclDeviceMirroringLicenseShows the license description for device Mirroring. Can be any of the ff.: - Permanent Mirroring - Temporary Mirroring (# of days remaining) - No License eg. 'Permanent Mirroring'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.13 |
avclDeviceWWNInfoCountThe count/number of WWN Information present in the device. eg. 1ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.14 |
avclDeviceWWNInfoAll WWN Information present in the device. First Controller WWN Information to be returned is that of Primary Controller, followed by Secondary Controller, and so on. F/O (Fail Over) Mode can be either 'Independent WWN' or 'Fail Over On Primary WWN' e.g. '50:03:07:A8:0A:00:01:13, F/O Mode: Independent WWN; 50:03:07:A8:0A:00:00:23, ....; ......'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.15 |
avclDeviceSurfaceSchedModeThe mode for the scheduled surface check. Can be one of the ff: Type: - No Surface Verify - Sequential Verify - Parity Check - Parity Re-Generation Frequency: - null or the value is the zero-length string - Now - Once A Day - Once A Week - Once A Month - Always e.g. 'Type: No Surface Verify; Frequency: ' or 'Type: Sequential Verify; Frequency: Once A Day'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.16 |
avclDeviceSurfaceSchedTimeThe time for the scheduled surface check. Can be any of the ff. description: - null or the value is the zero-length string if there is no surface check or if always surface check. - the time of the day if 'Once A Day' - the day of the week and the time if 'Once A Week' - the day of the month and the time if 'Once A Month eg. '14:15' if Once A Day, 'Wednesday, 14:15' if Once A Week, or '24, 14:15' if Once A Monthro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.17 |
avclDeviceSurfaceVerifyDurationThe duration of the scheduled surface check, in minutes. eg. 30ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.18 |
avclDeviceICSourceLUThe number of the source LU of the IC (Instant Copy) operation. eg. 1ro AvcInteger .1.3.6.1.4.1.2653.3.1.1.6.1.19 |
avclDeviceICTargetLUThe number of the target LU of the Instant Copy operation. eg. 2ro AvcInteger .1.3.6.1.4.1.2653.3.1.1.6.1.20 |
avclDeviceICFlagThis Instant Copy flag/status can be one of the ff.: - Stopped - Started - Copy to External Device - Copy From External Device - Instant Copy In Progress - Failed Due to Error - Cancelling Instant Copyro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.21 |
avclDeviceICProgressThis will contain the progress of the instant copy operation, in percent. eg. 99ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.22 |
avclDeviceICPairWWNThe worldwide node of the instant copy pair. eg. '50:03:07:A8:0A:00:01:13'ro AvcString .1.3.6.1.4.1.2653.3.1.1.6.1.23 |
avclDeviceRegHostCountThe count of all registered hosts present in the device. eg. 2ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.24 |
avclDeviceRegHostsInformation of all registered hosts present in the device. Information includes: - Host x WWN, i.e. 50:03:07:A8:0A:00:01:13 - L Port Number: 0 (for Fibre Channel Port 0) and 1 (for Fibre Channel Port 1) - Host x LU Conversion, i.e. LU 1 can be seen as LU 5 by this host and LU 3 as LU1. Show only valid LU conversions out of the possible 32 conversions.. e.g. '50:03:07:A8:0A:00:01:13, 0, LU1->LU5, LU3->LU1; 50:03:07:A8:0A:00:00:23, 0, LU0->LU2, LU1->LU4, LU5->LU6, ; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.25 |
avclDeviceLuToMirrorCountThe count of all LUs to mirror. eg. 3ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.26 |
avclDeviceLunsToMirrorInformation of all Luns to mirror. Includes: - Source Lun - Target Lun - L Port Number: 0 (for FC port 0) or 1 (for FC port 1) - Target WWN e.g. 'LU1, LU3, 0, 50:03:07:A8:0A:00:01:13; LU2, LU4, 1, 50:03:07:A8:0A:00:00:23; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.27 |
avclDeviceRaidGrpCountThe count of all RAID groups or arrays configured in any device. eg. 2ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.28 |
avclDeviceRaidGrpsStateContains the state of each raid group present in the device. Can be one of the following: - Normal mode - Degraded mode - Reconstruction mode - Retry mode - System is starting up - System shutdown - System is not configured - System halt e.g. 'Array 1: Normal mode; Array 2: System halt; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.29 |
avclDeviceRaidGrpsDriveCountThe number of drives included in each raid group. e.g. 'Array 1: 5; Array 2: 3; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.30 |
avclDeviceRaidGrpsSizeContains the size of each raid group. Size is in units of KB. e.g. 'Array 1: 645,620,224; Array 2: 300,000,000; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.31 |
avclDeviceRaidGrpsLuUnderSurfaceVerifyContains the volume or LU number of all raid groups that is currently undergoing surface verify. Display only the raid groups that are undergoing this feature. If no raid group is undergoing surface verify, this value is the zero-length string. e.g. 'Array 1: LU3; Array 3: LU11; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.32 |
avclDeviceRaidGrpsSurfaceVerifyProgressContains the progress, in percentage, of all raid groups undergoing surface verify. Display only the raid groups that are undergoing this feature. If no raid group is undergoing surface verify, this value is the zero-length string. e.g. 'Array 1: 10; Array 3: 98; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.33 |
avclDeviceRaidGrpsInitReconProgressContains the progress, in percentage, of the initialization or reconstruction for all raid groups undergoing such process. e.g. 'Array 1: 17; Array 3: 85; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.34 |
avclDeviceRaidGrpsFreeSpaceContains the total free space of all raid groups, in units of KB. e.g. 'Array 1: 5,000,000; Array 2: 0; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.35 |
avclDeviceSpareCountThe count of all spare drives in any device. eg. 1ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.36 |
avclDeviceSparesStateContains the state of each spare drive present in the device. Can be one of the following: - On Line - Off Line - Not Configured - Working Properly - Failed or Not Attached - Under Reconstruction - Under Retry - Installed - Not Installed - Starting Up - Standing By - Power Supplied to the Drive - No Power Supplied - Drive is Reserved - Drive is Not Reserved e.g. 'Spare 1: Under Reconstruction; Spare 2: On Line; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.37 |
avclDeviceSparesRaidGrpNumberShows the raid group number to which the spare belongs. value is 'Global' if the spare is global or does not belong to any raid group. e.g. 'Spare 1: 3; Spare 2: Global; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.38 |
avclDeviceVolumeCountThe count of all volumes present in any device. Maximum number of volumes configurable is 32. Volume/LU number starts at 0. eg. 4ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.39 |
avclDeviceVolumesStateContains the state of volumes present in the device. Can be one of the following: - Initialization Completed - Required - Initialization In Progress - LUN Failed - LUN Not Configured - Format Required - Format In Progress e.g. 'LU 1: LUN Failed; LU 2: Format Required; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.40 |
avclDeviceVolumesRaidGrpNumberShows the raid group number to which the volume belongs. e.g. 'LU 1: 2; LU 2: 2; LU 3: 1;......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.41 |
avclDeviceVolumesRaidLevelShows the raid level the volume is configured. Can be any of the following: 0 - RAID 0 1 - RAID 1 5 - RAID 5 e.g. 'LU 1: 0; LU 2: 0; LU 3: 5;......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.42 |
avclDeviceVolumesSizeShows the size of all volumes in the device, in units of KB. e.g. 'LU 1: 1,500,000; LU 2: 7,000,000; LU 3: 15,000,000;......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.43 |
avclDeviceVolumesInitProgressContains the progress, in percentage, of the initialization or reconstruction for all volumes undergoing such process. e.g. 'LU 1: 1; LU 2: 89; LU 3: 64;......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.44 |
avclDeviceVolumesNicknameContains the nickname or mount point of each volume in a device. If no nickname, the value is the zero-length string. e.g. 'LU 1: /mnt/device/sda; LU 2: ; LU 3: /mnt/device/sdc;......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.45 |
avclDeviceDriveCountThe count of all drives present in any device. Maximum number of drives is 15, but can be 30 if there is an expansion. eg. 15ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.46 |
avclDeviceDrivesStateContains the state of the drives present in the device. Can be one of the following: - On Line - Off Line - Spare - Not Configured - Working Properly - Failed or Not Attached - Under Reconstruction - Under Retry - Installed - Not Installed - Starting Up - Standing By - Power Supplied to the Drive - No Power Supplied - Drive is Reserved - Drive is Not Reserved e.g. 'Drive 1: Spare; LU 2: Starting UP; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.47 |
avclDeviceDrivesUsageTypeThe usage type of the drive in the device. Can be one of the ff.: - In Array - Not Assigned - As Spare - HDD does not exist e.g. 'Drive 1: As Spare; Drive 2: Not Assigned; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.48 |
avclDeviceDrivesRaidGrpOrSpareNumberThe raid group or spare number this drive belongs. If this is 'Not Assigned' or 'HDD does not exist', the value is the zero-length string. e.g. 'Drive 1: Spare 2; Drive 2: Array 1; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.49 |
avclDeviceComponentCountThe count of all components present in any device. eg. 3ro AvcCounter .1.3.6.1.4.1.2653.3.1.1.6.1.50 |
avclDeviceComponentsTypeThe usage type of the component in the device. Can be one of the ff.: - Power Supply - Fan e.g. 'Component 1: Power Supply; Component 2: Fan; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.51 |
avclDeviceComponentsStateContains the state of the components present in the device. Can be one of the following: - Normal - Fail - Not Available e.g. 'Component 1: Normal; Component 2: Fail; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.52 |
avclDeviceComponentsInstanceNumberThe index number of each unique component device type. Format of values are: PS1 - Power Supply 1 F2 - Fan 2 e.g. 'Component 1: PS1; Component 2: F2; ......'ro AvcLongString .1.3.6.1.4.1.2653.3.1.1.6.1.53 |