ACMEPACKET-ENVMON-MIB
AI MIB Summary
The ACMEPACKET-ENVMON-MIB enables SNMP-based monitoring of environmental sensor data, including temperature, voltage, and fan status, on Acme Packet Session Border Controller hardware. This module provides real-time visibility into physical device health to facilitate proactive thermal and power infrastructure management.
The MIB module to describe the status of the Environmental Monitor on the devices.
Main OID:
apEnvMonModule.1.3.6.1.4.1.9148.3.3
90
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
90 total| Object Name |
|---|
apEnvMonModuleThe MIB module to describe the status of the Environmental Monitor on the devices. MODULE-IDENTITY .1.3.6.1.4.1.9148.3.3 |
apEnvMonObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1 |
apEnvMonI2CStatethe state of environment monitor located in the chassis.ro ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.1 |
apEnvMonVoltageObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1.2 |
apEnvMonVoltageStatusTableThe table of voltage status maintained by the environmental monitor. SEQUENCE OF ApEnvMonVoltageStatusEntry .1.3.6.1.4.1.9148.3.3.1.2.1 |
apEnvMonVoltageStatusEntryAn entry in the voltage status table, representing the status of the associated testpoint maintained by the environmental monitor. ApEnvMonVoltageStatusEntry .1.3.6.1.4.1.9148.3.3.1.2.1.1 |
apEnvMonVoltageStatusIndexUnique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. Integer32 .1.3.6.1.4.1.9148.3.3.1.2.1.1.1 |
apEnvMonVoltageStatusTypeThe entity part type from which the voltage value is from v2p5- 2.5V sensor: L3 cache core voltage; micro-processor and co-processoor I/O voltage; FPGA memories I/O voltage. v3p3 - 3.3V sensor: general TTL supply rail; control logic; micro-processor; micro-processor and co-processor; SDRAM v5 - 5V sensor: Fans; micro-processor core voltage regulator. CPU - CPU voltage micro-processor core voltage.ro Enumeration .1.3.6.1.4.1.9148.3.3.1.2.1.1.2 |
apEnvMonVoltageStatusDescrTextual description of the voltage being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.ro DisplayString .1.3.6.1.4.1.9148.3.3.1.2.1.1.3 |
apEnvMonVoltageStatusValueThe current measurement of voltage if avaiable. The value is expressed as the integer in millivolts unit.ro Integer32 UNITS "millivolts" .1.3.6.1.4.1.9148.3.3.1.2.1.1.4 |
apEnvMonVoltageStateThe current state of the testpoint being instrumented.ro ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.2.1.1.5 |
apEnvMonVoltageSlotIDThe slot this voltage is found on.ro INTEGER .1.3.6.1.4.1.9148.3.3.1.2.1.1.6 |
apEnvMonVoltageSlotTypeThe type of module found in this slot.ro ApHardwareModuleFamily (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.1.2.1.1.7 |
apEnvMonTemperatureObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1.3 |
apEnvMonTemperatureStatusTableThe table of ambient temperature status maintained by the environmental monitor. SEQUENCE OF ApEnvMonTemperatureStatusEntry .1.3.6.1.4.1.9148.3.3.1.3.1 |
apEnvMonTemperatureStatusEntryAn entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor. ApEnvMonTemperatureStatusEntry .1.3.6.1.4.1.9148.3.3.1.3.1.1 |
apEnvMonTemperatureStatusIndexUnique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. Integer32 .1.3.6.1.4.1.9148.3.3.1.3.1.1.1 |
apEnvMonTemperatureStatusTypeThe entity part type from which the temperature value is fromro Enumeration .1.3.6.1.4.1.9148.3.3.1.3.1.1.2 |
apEnvMonTemperatureStatusDescrTextual description of the temperature being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.ro DisplayString .1.3.6.1.4.1.9148.3.3.1.3.1.1.3 |
apEnvMonTemperatureStatusValueThe current measurement of the testpoint being instrumented.ro Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.9148.3.3.1.3.1.1.4 |
apEnvMonTemperatureStateThe current state of the testpoint being instrumented.ro ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.3.1.1.5 |
apEnvMonTemperatureSlotIDThe slot this temperature is found on.ro INTEGER .1.3.6.1.4.1.9148.3.3.1.3.1.1.6 |
apEnvMonTemperatureSlotTypeThe type of module found in this slot.ro ApHardwareModuleFamily (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.1.3.1.1.7 |
apEnvMonFanObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1.4 |
apEnvMonFanStatusTableThe table of fan status maintained by the environmental monitor. SEQUENCE OF ApEnvMonFanStatusEntry .1.3.6.1.4.1.9148.3.3.1.4.1 |
apEnvMonFanStatusEntryAn entry in the fan status table, representing the status of the associated fan maintained by the environmental monitor. ApEnvMonFanStatusEntry .1.3.6.1.4.1.9148.3.3.1.4.1.1 |
apEnvMonFanStatusIndexUnique index for the fan being instrumented. This index is for SNMP purposes only. Integer32 .1.3.6.1.4.1.9148.3.3.1.4.1.1.1 |
apEnvMonFanStatusTypeThe entity part type from which the fan value is from. The left and right at the base when one faces the front of the SD. Next-generation products contain replaceable fans contained in chassis slots.ro Enumeration .1.3.6.1.4.1.9148.3.3.1.4.1.1.2 |
apEnvMonFanStatusDescrTextual description of the fan being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.ro DisplayString .1.3.6.1.4.1.9148.3.3.1.4.1.1.3 |
apEnvMonFanStatusValueThe current percentage measurement of the fan speed.ro Gauge32 UNITS "%" .1.3.6.1.4.1.9148.3.3.1.4.1.1.4 |
apEnvMonFanStateThe current state of the fan being instrumented.ro ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.4.1.1.5 |
apEnvMonFanSlotIDThe slot this van is found in. zero is returned if this fan is not of apEnvMonFanStatusType slot(3).ro INTEGER .1.3.6.1.4.1.9148.3.3.1.4.1.1.6 |
apEnvMonPowerSupplyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1.5 |
apEnvMonPowerSupplyStatusTableThe table of power supply status maintained by the environmental monitor card. SEQUENCE OF ApEnvMonPowerSupplyStatusEntry .1.3.6.1.4.1.9148.3.3.1.5.1 |
apEnvMonPowerSupplyStatusEntryAn entry in the power supply status table, representing the status of the associated power supply maintained by the environmental monitor card. ApEnvMonPowerSupplyStatusEntry .1.3.6.1.4.1.9148.3.3.1.5.1.1 |
apEnvMonPowerSupplyStatusIndexUnique index for the power supply being instrumented. This index is for SNMP purposes only. Integer32 .1.3.6.1.4.1.9148.3.3.1.5.1.1.1 |
apEnvMonPowerSupplyStatusTypeThe entity part type from which the power status is from. 0=left:power supply A, 1=right:power supply B. 3=slot: power supply is contained in the slot corresponding to apEnvMonPowerSowerSupplyStatusIndexro Enumeration .1.3.6.1.4.1.9148.3.3.1.5.1.1.2 |
apEnvMonPowerSupplyStatusDescrTextual description of the power supply being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.ro DisplayString .1.3.6.1.4.1.9148.3.3.1.5.1.1.3 |
apEnvMonPowerSupplyStateThe current state of the power supply being instrumented: normal or notPresentro ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.5.1.1.4 |
apEnvMonPhyCardObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1.6 |
apEnvMonPhyCardStatusTableTHIS TABLE IS BEING DEPRECATED IN FAVOR OF THE MORE GENERIC apEnvMonCardTable. Please Note: in the generic card table, a phy card is referred to as an 'niu' (network interfacing unit). The table of phy card status maintained by the environmental monitor.deprecated SEQUENCE OF ApEnvMonPhyCardStatusEntry .1.3.6.1.4.1.9148.3.3.1.6.1 |
apEnvMonPhyCardStatusEntryAn entry in the phy status table, representing the status of the associated phy maintained by the environmental monitor.deprecated ApEnvMonPhyCardStatusEntry .1.3.6.1.4.1.9148.3.3.1.6.1.1 |
apEnvMonPhyCardStatusIndexUnique index for the phy being instrumented. This index is for SNMP purposes only.deprecated Integer32 .1.3.6.1.4.1.9148.3.3.1.6.1.1.1 |
apEnvMonPhyCardStatusTypeThe entity part type from which the phy card is from. 0=left:card A, 1=right:card B, 3=only card. 3=slot: phyCard is contained in the slot corresponding to apEnvMonPhyCardStatusIndexrodeprecated Enumeration .1.3.6.1.4.1.9148.3.3.1.6.1.1.2 |
apEnvMonPhyCardStatusDescrTextual description of the phy being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.rodeprecated DisplayString .1.3.6.1.4.1.9148.3.3.1.6.1.1.3 |
apEnvMonPhyCardStateThe current state of the phy being instrumented: normal or notPresentrodeprecated ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.6.1.1.4 |
apEnvMonCardObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.1.7 |
apEnvMonCardTableList of Cards in the chassis SEQUENCE OF ApEnvMonCardEntry .1.3.6.1.4.1.9148.3.3.1.7.1 |
apEnvMonCardEntryA single card in the chassis ApEnvMonCardEntry .1.3.6.1.4.1.9148.3.3.1.7.1.1 |
apEnvMonCardSlotSlot number of this card. Please note that the slot number is zero-based, i.e. they are numbered 0-n.ro INTEGER .1.3.6.1.4.1.9148.3.3.1.7.1.1.1 |
apEnvMonCardTypeThe card typero ApHardwareModuleFamily (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.1.7.1.1.2 |
apEnvMonCardDescrA text description of this cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9148.3.3.1.7.1.1.3 |
apEnvMonCardHealthScoreThe health score of this cardro INTEGER .1.3.6.1.4.1.9148.3.3.1.7.1.1.4 |
apEnvMonCardStatethe current state of this cardro ApEnvMonState .1.3.6.1.4.1.9148.3.3.1.7.1.1.5 |
apEnvMonCardRedundancyRedundancy state of the cardro ApRedundancyState (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.1.7.1.1.6 |
apEnvMonCpuCoreTableList of cores per CPU in the chassis SEQUENCE OF ApEnvMonCpuCoreEntry .1.3.6.1.4.1.9148.3.3.1.7.2 |
apEnvMonCpuCoreEntryA single CPU core in the chassis ApEnvMonCpuCoreEntry .1.3.6.1.4.1.9148.3.3.1.7.2.1 |
apEnvMonCpuCoreIndexthe core index on the CPUro INTEGER .1.3.6.1.4.1.9148.3.3.1.7.2.1.1 |
apEnvMonCpuCoreDescrthe cpu core descriptorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9148.3.3.1.7.2.1.2 |
apEnvMonCpuCoreUsageThe current percentage of use for the CPU core.ro Gauge32 UNITS "%" .1.3.6.1.4.1.9148.3.3.1.7.2.1.3 |
apEnvMonCpuCoreStateThe state of this CPU core.ro Enumeration .1.3.6.1.4.1.9148.3.3.1.7.2.1.4 |
apEnvMonCpuCoreRamDescrThe cpu core RAM descriptorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9148.3.3.1.7.2.1.5 |
apEnvMonCpuCoreRamUsageThe current percentage of use for the CPU core RAM.ro Gauge32 UNITS "%" .1.3.6.1.4.1.9148.3.3.1.7.2.1.6 |
apEnvMonMIBNotificationEnables OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.2 |
apEnvMonEnableStatChangeNotifThis variable indicates whether the system produces any of the traps generated by this mib. A false value will prevent them from being generated by this system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9148.3.3.2.1 |
apEnvMonNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.3 |
apEnvMonTrapInstanceThe object ID of the item which value is exceeds its monitoring threshold. If the item is within a table, this OID is the instance of this item's index within its table. For exmple, 1. if the state of 2.5v voltage changes, the trap OID is the instance of index OID, which is 1.3.6.1.4.1.9148.3.3.1.2.4.1.1.1 2. if the state of mainboard temperature changes, the trap OID is, 1.3.6.1.4.1.9148.3.3.1.3.4.1.1.1 3. if the state of left fan changes, the trap OID is 1.3.6.1.4.1.9148.3.3.1.4.4.1.1.1 If the item is scalar, the OID is the instance is of this item, For example, If the I2C state changes, the OID is 1.3.6.1.4.1.9148.3.3.1.4.4.1.1.0ro OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.3.1 |
apEnvMonTrapPreviousStateThe previous state of the object.ro ApEnvMonState .1.3.6.1.4.1.9148.3.3.3.2 |
apEnvMonTrapCurrentStateThe current state of the object which causes the trap to occur.ro ApEnvMonState .1.3.6.1.4.1.9148.3.3.3.3 |
apEnvMonTrapSlotIDThe slotID which causes the trap to occur.ro INTEGER .1.3.6.1.4.1.9148.3.3.3.4 |
apEnvMonTrapSlotTypeThe slot type which causes the trap to occur.ro ApHardwareModuleFamily (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.3.5 |
apEnvMonTrapPortTypeThe port type which causes the trap to occur.ro ApPhyPortType (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.3.6 |
apEnvMonTrapPresenceThe state which causes the trap to occur.ro ApPresence (ACMEPACKET-TC) .1.3.6.1.4.1.9148.3.3.3.7 |
apEnvMonTrapPortIDThe ID of the port which causes the trap to occur.ro Integer32 .1.3.6.1.4.1.9148.3.3.3.8 |
apEnvMonMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.4 |
apEnvMonMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.4.0 |
apEnvMonI2CFailNotificationA notification of I2C state turns from normal(1) to notFunctioning(7) NOTIFICATION-TYPE .1.3.6.1.4.1.9148.3.3.4.0.1 |
apEnvMonStatusChangeNotificationA apEnvStatusChangeNotification is sent if any entry of above table change in the state of a device being monitored NOTIFICATION-TYPE .1.3.6.1.4.1.9148.3.3.4.0.2 |
apEnvMonTempChangeNotificationA notification is sent if any of the units cross a temperature threshold NOTIFICATION-TYPE .1.3.6.1.4.1.9148.3.3.4.0.3 |
apEnvMonVoltageChangeNotificationA notification is sent if any of the units cross a voltage threshold NOTIFICATION-TYPE .1.3.6.1.4.1.9148.3.3.4.0.4 |
apEnvMonPortChangeNotificationThe trap will be generated if a physical port is inserted/present or removed/not present. NOTIFICATION-TYPE .1.3.6.1.4.1.9148.3.3.4.0.5 |
apEnvMonMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.5 |
apEnvMonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.5.1 |
apEnvMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9148.3.3.5.2 |
apEnvMonGroupA collection of objects providing environmental monitoring capability to an Acme Packet chassis. Unknown .1.3.6.1.4.1.9148.3.3.5.2.1 |
apEnvMonNotifyGroupA collection of notifications providing the status change for environmental monitoring. Unknown .1.3.6.1.4.1.9148.3.3.5.2.3 |
apEnvMonExtGroupAdditional objects providing environmental monitoring capability to an Acme Packet chassis. Unknown .1.3.6.1.4.1.9148.3.3.5.2.4 |
apEnvMonCardGroupA collection of objects providing environmental monitoring capability to card-based Acme Packet products. Unknown .1.3.6.1.4.1.9148.3.3.5.2.5 |
apEnvMonExtNotifyGroupAdditional collection of notifications providing the status change for environmental monitoring. Unknown .1.3.6.1.4.1.9148.3.3.5.2.6 |
apEnvMonPortNotifyGroupNotifications to indicate physical port changes. Unknown .1.3.6.1.4.1.9148.3.3.5.2.7 |