A3Com-MLN-r1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for A3Com-MLN-r1-MIB.
51
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1213-MIB Unknown .1.3.6.1.4.1.43 |
brouterMIB OBJECT IDENTIFIER .1.3.6.1.4.1.43.2 |
a3ComMLN OBJECT IDENTIFIER .1.3.6.1.4.1.43.2.23 |
a3mlnMaxPortsThe maximum number of virtual and physical ports supported
by the agent. This value should be used to verify correct
port values.ro INTEGER .1.3.6.1.4.1.43.2.23.1 |
a3mlnMaxPhyPortsThe maximum number of physical ports supported by the
agent. This value should be used to verify correct port
values.ro INTEGER .1.3.6.1.4.1.43.2.23.2 |
a3mlnCCSsaveErrThe count of detected CCS Parameter saves that failed during
the previous set operation. A value other than zero indicates
that the running and stored configurations are not the same.ro INTEGER .1.3.6.1.4.1.43.2.23.3 |
a3mlnCCSdelErrThe count of detected CCS Parameter deletes that failed during
the previous set operation. A value other than zero indicates
that the running and stored configurations are not the same.ro INTEGER .1.3.6.1.4.1.43.2.23.4 |
a3mlnSetStatusThe application's result of the last SET operation. This
object is used to determine if the a3mlnLastSetMsg object
is valid, and is NOT for general SNMP errors. In order to
see warnings, this object must be polled after any set. The
error state is communicated by the agent failing the set
operation.ro Enumeration .1.3.6.1.4.1.43.2.23.5 |
a3mlnSetMsgThe equalivent UI message for the previous SET operation.
Valid only if a3mlnLastSetStatus is set to a value other
than `setNoErr'.ro DisplayString .1.3.6.1.4.1.43.2.23.6 |
a3mlnPortTableA table of all physical and virtual ports which may
be configured with the Logical Networks service. SEQUENCE OF A3mlnPortEntry .1.3.6.1.4.1.43.2.23.7 |
a3mlnPortEntryEach entry in this table represents a physical or
virtual port. A3mlnPortEntry .1.3.6.1.4.1.43.2.23.7.1 |
a3mlnPindexThis object specifies a port entry in the table and is
specified as a value within the total port range
(a3mlnMaxPorts).ro INTEGER .1.3.6.1.4.1.43.2.23.7.1.1 |
a3mlnPtypeThe port's type. A value of `ppmPort' indicates that the
port has not been configured in any Logical Network.ro Enumeration .1.3.6.1.4.1.43.2.23.7.1.2 |
a3mlnPownerThe port's owner (media type). If this is a Group Port, all
Member ports must have the same owner. A value of `otherMedia'
would imply a non-supported owner (media type).ro Enumeration .1.3.6.1.4.1.43.2.23.7.1.3 |
a3mlnPlinkFor a Group Port, this is either the value of the first
member port or, if there are no member ports, the value
negative two. For a Member port, this is the value of
Group Port.ro INTEGER .1.3.6.1.4.1.43.2.23.7.1.4 |
a3mlnPstStateThe Spanning Tree state of this port. For a Group Port,
this is the aggregate of all Member port states. If all
Member ports are blocking, the Group Port is blocking.
If a single Member port is forwarding, the Group Port is
forwarding. For a Member port, this is that port's state.
If the port has not been configured as an MLN port, the
value `ignore' will be returned.ro Enumeration .1.3.6.1.4.1.43.2.23.7.1.5 |
a3mlnPtbStateOnly valid for Member ports. This is the Transparent Bridge
CONTrol value setting of the learn parameter. If the port
has not been configured as a Logical Network port, the value
`ignore' will be returned.ro Enumeration .1.3.6.1.4.1.43.2.23.7.1.6 |
a3mlnPgrpPrimaryPortOnly valid for Group Ports. This is the value of the physical
port assigned as the group's primary port. This value is
assigned by the agent and may change over time.ro INTEGER .1.3.6.1.4.1.43.2.23.7.1.7 |
a3mlnPgrpSrcAdrPortOnly valid for Group Ports. This is the physical port used
to assign the group's source MAC address used for all packets
transmitted by the group. This value is assigned by the agent.
A value of negative two indicates that no source port has been
assigned or that this is not a Group Port.ro INTEGER .1.3.6.1.4.1.43.2.23.7.1.8 |
a3mlnPgrpSrcAdrMediaOnly valid for Group Ports. This is the media type of the
physical port being used for the group's source address.
This value is assigned by the agent.ro Enumeration .1.3.6.1.4.1.43.2.23.7.1.9 |
a3mlnPgrpSrcAdrValueOnly valid for Group Ports. This is the physical MAC
address of the group's source port. In the future, a profile
VARIATION should be used to further specify media formats
such as MacAddress, SMDSAddress, etc. This value is assigned
by the agent.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.43.2.23.7.1.10 |
a3mlnPgrpDescriptionOnly valid for Group Ports. This is the description (name)
string for this Logical Network.ro DisplayString .1.3.6.1.4.1.43.2.23.7.1.11 |
a3mlnGroupTableA table of all configured Logical Network Group
Ports. SEQUENCE OF A3mlnGroupEntry .1.3.6.1.4.1.43.2.23.8 |
a3mlnGroupEntryEach entry in this table represents a Logical Network's
Group Port. A3mlnGroupEntry .1.3.6.1.4.1.43.2.23.8.1 |
a3mlnGrpPortThis object specifies an entry in the table, and is a
Group Port. Group Ports are virtual ports used as points
of attachment to Logical Networks by upper layer clients.
Valid values number within the virtual port range (greater
than a3mlnMaxPhyPorts and less than a3mlnMaxPorts).ro INTEGER .1.3.6.1.4.1.43.2.23.8.1.1 |
a3mlnGrpPortTypeThis port's type. The only valid value for a Group Port is
`groupPort'.ro Enumeration .1.3.6.1.4.1.43.2.23.8.1.2 |
a3mlnGrpPortStateThe PPM state of this Group Port.ro Enumeration .1.3.6.1.4.1.43.2.23.8.1.3 |
a3mlnGrpPrimaryPortThis is the value of the physical port assigned as
the group's primary port. This value is assigned by
the agent.ro INTEGER .1.3.6.1.4.1.43.2.23.8.1.4 |
a3mlnGrpOwnerThe owner of this group (which is actually the media type
for the group). All Member ports must have the same owner.rw Enumeration .1.3.6.1.4.1.43.2.23.8.1.5 |
a3mlnGrpMemberCountThe number of Member ports in this group.ro INTEGER .1.3.6.1.4.1.43.2.23.8.1.6 |
a3mlnGrpFirstMemberThis is the value (index) of the first Member port of
this group. A value of negative two indicates that no
Member ports have been configured.ro INTEGER .1.3.6.1.4.1.43.2.23.8.1.7 |
a3mlnGrpDescriptionThe description (name) string for this logical network.rw DisplayString .1.3.6.1.4.1.43.2.23.8.1.8 |
a3mlnGrpEntryStatusThis object is used to add and delete entries in this
table. See RowStatus description at the beginning of
this MIB. Note - A group's description may be changed
without first deleting the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.2.23.8.1.9 |
a3mlnMemberTableA table of configured Logical Networks. SEQUENCE OF A3mlnMemberEntry .1.3.6.1.4.1.43.2.23.9 |
a3mlnMemberEntryEach entry in this table represents a Logical Network. A3mlnMemberEntry .1.3.6.1.4.1.43.2.23.9.1 |
a3mlnMemGrpPortThis object specifies a Logical Network within the table
and is a Group Port within the virtual port range (greater
than a3mlnMaxPhyPorts and less than a3mlnMaxPorts).ro INTEGER .1.3.6.1.4.1.43.2.23.9.1.1 |
a3mlnMemPortThis object specifies a Member port within a Logical Network
and is a physical port within the physical port range
(less than a3mlnMaxPhyPorts).ro INTEGER .1.3.6.1.4.1.43.2.23.9.1.2 |
a3mlnMemOwnerThe owner of this group (which is actually the media type
for the group). All Member ports must have the same owner.rw Enumeration .1.3.6.1.4.1.43.2.23.9.1.3 |
a3mlnMemEntryStatusThis object is used to add and delete entries in this
table. See RowStatus description at the beginning of
this MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.2.23.9.1.4 |
a3mlnStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.43.2.23.10 |
a3mlnStatSelGrpPortThe number of times a Group Port has been selected.ro INTEGER .1.3.6.1.4.1.43.2.23.10.1 |
a3mlnStatSelMacAdrThe number of times a MAC address has been selected.ro INTEGER .1.3.6.1.4.1.43.2.23.10.2 |
a3mlnPortStatTableA table of Logical Network Member port statistics. SEQUENCE OF A3mlnPortStatEntry .1.3.6.1.4.1.43.2.23.10.3 |
a3mlnPortStatEntryEach entry in this table represents statistics for a
Member port of a Logical Network. A3mlnPortStatEntry .1.3.6.1.4.1.43.2.23.10.3.1 |
a3mlnPStatIndexThis object specifies an entry in the port statistics table
and is a Member port within the physical port range (less
than a3mlnMaxPhyPorts).ro INTEGER .1.3.6.1.4.1.43.2.23.10.3.1.1 |
a3mlnPStatRcvdCount of data frames received on this port.ro INTEGER .1.3.6.1.4.1.43.2.23.10.3.1.2 |
a3mlnPStatXmitCount of data frames transmitted from this port.ro INTEGER .1.3.6.1.4.1.43.2.23.10.3.1.3 |
a3mlnPStatStaMoveFromCount of detected stations moving away from this port.ro INTEGER .1.3.6.1.4.1.43.2.23.10.3.1.4 |
a3mlnPStatStaMoveToCount of detected stations moving to this port.ro INTEGER .1.3.6.1.4.1.43.2.23.10.3.1.5 |
a3mlnPStatSTAchangeCount of Spanning Tree state changes for this port.ro INTEGER .1.3.6.1.4.1.43.2.23.10.3.1.6 |