A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB.
32
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1213-MIB Unknown .1.3.6.1.4.1.43 |
switchingSystemsMibs OBJECT IDENTIFIER .1.3.6.1.4.1.43.29 |
a3ComSwitchingSystemsMib OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4 |
a3ComSysTokenRingPort OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.13 |
a3ComSysTokenRingPortCountThe count of token ring ports managed by this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.13.1 |
a3ComSysTokenRingPortTableA list of token ring port entries. A single entry exists
in this list for each token ring port managed by this agent. SEQUENCE OF A3ComSysTokenRingPortEntry .1.3.6.1.4.1.43.29.4.13.2 |
a3ComSysTokenRingPortEntryA token ring port entry contains information about a
particular token ring port managed by this agent. A3ComSysTokenRingPortEntry .1.3.6.1.4.1.43.29.4.13.2.1 |
a3ComSysTokenRingPortIndexThe index of the token ring port identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.13.2.1.1 |
a3ComSysTokenRingPortIfIndexThe value of the MIB-II ifIndex corresponding to the
token ring port identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.13.2.1.2 |
a3ComSysTokenRingPortLabelAn ASCII text string describing the token ring port
identified by this entry.rw DisplayString .1.3.6.1.4.1.43.29.4.13.2.1.3 |
a3ComSysTokenRingPortInsertStatusThe current value of the link status for the token ring port
identified by this entry.ro Enumeration .1.3.6.1.4.1.43.29.4.13.2.1.4 |
a3ComSysTokenRingPortTypeSpecific port type description for the token ring port
identified by this entry.ro Enumeration .1.3.6.1.4.1.43.29.4.13.2.1.5 |
a3ComSysTokenRingPortModeThe current mode of the port. The default mode (station) is
used to connect a hub to the port. Lobe mode is used to direct
connect a Token Ring station into the port. This selection
can only be made on ports 1 and 2 of the module.rw Enumeration .1.3.6.1.4.1.43.29.4.13.2.1.6 |
a3ComSysTokenRingPortSpeedThe current speed of the port. The default speed is
sixteenMegabit.rw Enumeration .1.3.6.1.4.1.43.29.4.13.2.1.7 |
a3ComSysTokenRingPortLineErrorsThis counter is incremented when a frame
or token is copied or repeated by a
station, the E bit is zero in the frame
or token and one of the following
conditions exists: 1) there is a
non-data bit (J or K bit) between the SD
and the ED of the frame or token, or
2) there is an FCS error in the frame.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.8 |
a3ComSysTokenRingPortBurstErrorsThis counter is incremented when a station
detects the absence of transitions for five
half-bit timers (burst-five error).ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.9 |
a3ComSysTokenRingPortACErrorsThis counter is incremented when a station
receives an AMP or SMP frame in which A is
equal to C is equal to 0, and then receives
another SMP frame with A is equal to C is
equal to 0 without first receiving an AMP
frame. It denotes a station that cannot set
the AC bits properly.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.10 |
a3ComSysTokenRingPortAbortTransErrorsThis counter is incremented when a station
transmits an abort delimiter while
transmitting.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.11 |
a3ComSysTokenRingPortInternalErrorsThis counter is incremented when a station
recognizes an internal error.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.12 |
a3ComSysTokenRingPortLostFrameErrorsThis counter is incremented when a station
is transmitting and its TRR timer expires.
This condition denotes a condition where a
transmitting station in strip mode does not
receive the trailer of the frame before the
TRR timer goes off.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.13 |
a3ComSysTokenRingPortReceiveCongestionErrorsThis counter is incremented when a station
recognizes a frame addressed to its
specific address, but has no available
buffer space indicating that the station
is congested.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.14 |
a3ComSysTokenRingPortFrameCopiedErrorsThis counter is incremented when a station
recognizes a frame addressed to its
specific address and detects that the FS
field A bits are set to 1 indicating a
possible line hit or duplicate address.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.15 |
a3ComSysTokenRingPortTokenErrorsThis counter is incremented when a station
acting as the active monitor recognizes an
error condition that needs a token
transmitted.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.16 |
a3ComSysTokenRingPortSoftErrorsThe number of Soft Errors the interface
has detected. It directly corresponds to
the number of Report Error MAC frames
that this interface has transmitted.
Soft Errors are those which are
recoverable by the MAC layer protocols.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.17 |
a3ComSysTokenRingPortHardErrorsThe number of times this interface has
detected an immediately recoverable
fatal error. It denotes the number of
times this interface is either
transmitting or receiving beacon MAC
frames.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.18 |
a3ComSysTokenRingPortTransmitBeaconsThe number of times this interface has
transmitted a beacon frame.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.19 |
a3ComSysTokenRingPortLobeWiresThe number of times the interface has
detected an open or short circuit in the
lobe data path. The adapter will be closed
when this condition occurs.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.20 |
a3ComSysTokenRingPortRemovesThe number of times the interface has
received a Remove Ring Station MAC frame
request. When this frame is received
the interface will enter the close state.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.21 |
a3ComSysTokenRingPortSinglesThe number of times the interface has
sensed that it is the only station on the
ring. This will happen if the interface
is the first one up on a ring, or if
there is a hardware problem.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.22 |
a3ComSysTokenRingPortFreqErrorsThe number of times the interface has
detected that the frequency of the
incoming signal differs from the expected
frequency.ro Counter .1.3.6.1.4.1.43.29.4.13.2.1.23 |
a3ComSysTokenRingPortRingStatusThe current interface status which can
be used to diagnose fluctuating problems
that can occur on token rings, after a
station has successfully been added to
the ring.
Before an open is completed, this
object has the value for the 'no status'
condition. This object is useful for
debugging problems when the station
can not even enter the ring.
The object's value is a sum of
values, one for each currently applicable
condition. The following values are
defined for various conditions:
0 = No Problems detected
32 = Ring Recovery
64 = Single Station
256 = Remove Received
512 = reserved
1024 = Auto-Removal Error
2048 = Lobe Wire Fault
4096 = Transmit Beacon
8192 = Soft Error
16384 = Hard Error
32768 = Signal Loss
131072 = no status, open not completed.ro INTEGER .1.3.6.1.4.1.43.29.4.13.2.1.24 |