A3COM-SWITCHING-SYSTEMS-FILTER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-FILTER-MIB.
54
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1155-SMI Unknown .1.3.6.1.4.1.43 |
switchingSystemsMibs OBJECT IDENTIFIER .1.3.6.1.4.1.43.29 |
a3ComSwitchingSystemsMib OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4 |
a3ComFilterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.20 |
a3ComFilterAddressGroup OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.20.1 |
a3ComFilterAddressGroupNextAvailableIndexThe value of next available a3ComFilterAddressGroupId.
This object is used for index value to create a new
address group.ro Unknown .1.3.6.1.4.1.43.29.4.20.1.1 |
a3ComFilterAddressGroupCountThe count of defined address groups.ro INTEGER .1.3.6.1.4.1.43.29.4.20.1.2 |
a3ComFilterAddressGroupTableA list of address group entries. A single
entry exists in this list for each defined
address group in the system. SEQUENCE OF A3ComFilterAddressGroupEntry .1.3.6.1.4.1.43.29.4.20.1.3 |
a3ComFilterAddressGroupEntryAn individual address group entry. A3ComFilterAddressGroupEntry .1.3.6.1.4.1.43.29.4.20.1.3.1 |
a3ComFilterAddressGroupIdThis object uniquely identifies an address group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterAddressGroupNextAvailableIndex
when a new address group is created.ro INTEGER .1.3.6.1.4.1.43.29.4.20.1.3.1.1 |
a3ComFilterAddressGroupMaskIdThis object identifies an address group in a bridge. Each
address group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new address group in the desired bridge(s).rw INTEGER .1.3.6.1.4.1.43.29.4.20.1.3.1.2 |
a3ComFilterAddressGroupBridgeMaskA mask that uniquely identifies the bridge value(s)
associated with this address group entry. For example,
0x0000 0000 0000 0003 represents the address group entry in
bridge number 1 and 2.rw OCTET STRING .1.3.6.1.4.1.43.29.4.20.1.3.1.3 |
a3ComFilterAddressGroupNameThe name of an address group. Each address group
has an unique name in a system.rw DisplayString .1.3.6.1.4.1.43.29.4.20.1.3.1.4 |
a3ComFilterAddressGroupStatusThe status column for this address group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempt
to create and commit the row based on the contents of the objects in
the row. If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the agent will
reject the creation request.
Setting this object to destroy(6) will delete the corresponding
address group and all the attributes of the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.1.3.1.5 |
a3ComFilterAddressTableA list of address entries. SEQUENCE OF A3ComFilterAddressEntry .1.3.6.1.4.1.43.29.4.20.1.4 |
a3ComFilterAddressEntryA set of parameters for a particular address entry. A3ComFilterAddressEntry .1.3.6.1.4.1.43.29.4.20.1.4.1 |
a3ComFilterAddressIdThis object uniquely identifies an address group as
defined in a3ComFilterAddressGroupTable. It is obtained
from a3ComFilterAddressGroupNextAvailableIndex.ro INTEGER .1.3.6.1.4.1.43.29.4.20.1.4.1.1 |
a3ComFilterAddressAddressThe physical address of this entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.1.4.1.2 |
a3ComFilterAddressStatusThe status column for this address group entry. This
OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempt
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent add the
corresponding address to the specified address group.
Setting this object to destroy(6) will remove the corresponding
address from the indicated address group.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.1.4.1.3 |
a3ComFilterPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.20.2 |
a3ComFilterPortGroupNextAvailableIndexThe value of next available a3ComFilterPortGroupId.
This object is used for index value to create a new
port group.ro INTEGER .1.3.6.1.4.1.43.29.4.20.2.1 |
a3ComFilterPortGroupCountThe count of defined port groups in the system.ro INTEGER .1.3.6.1.4.1.43.29.4.20.2.2 |
a3ComFilterPortGroupTableA list of port group entries. A single
entry exists in this list for each defined
port group in the system. SEQUENCE OF A3ComFilterPortGroupEntry .1.3.6.1.4.1.43.29.4.20.2.3 |
a3ComFilterPortGroupEntryA set of parameters for an individual port
group entry. A3ComFilterPortGroupEntry .1.3.6.1.4.1.43.29.4.20.2.3.1 |
a3ComFilterPortGroupIdThis object uniquely identifies a port group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterPortGroupNextAvailableIndex
when a new port group is created.ro INTEGER .1.3.6.1.4.1.43.29.4.20.2.3.1.1 |
a3ComFilterPortGroupMaskIdThis object identifies a port group in a bridge. Each
port group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new port group in a bridge.rw INTEGER .1.3.6.1.4.1.43.29.4.20.2.3.1.2 |
a3ComFilterPortGroupBridgeNumberThe bridge index associated with this port group.rw INTEGER .1.3.6.1.4.1.43.29.4.20.2.3.1.3 |
a3ComFilterPortGroupNameThe name of this port group. This object has be
unique in a system.rw DisplayString .1.3.6.1.4.1.43.29.4.20.2.3.1.4 |
a3ComFilterPortGroupStatusThe status column for this port group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempting
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent add the
corresponding port to the specified port group.
Setting this object to destroy(6) will remove the corresponding port
group and its mask from the port group table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.2.3.1.5 |
a3ComFilterPortTableA list of port entries. SEQUENCE OF A3ComFilterPortEntry .1.3.6.1.4.1.43.29.4.20.2.4 |
a3ComFilterPortEntryAn individual port entry. A3ComFilterPortEntry .1.3.6.1.4.1.43.29.4.20.2.4.1 |
a3ComFilterPortIdThis object uniquely identify an address group in the systems.
It successively increases starting from 1. This value is
obtained through a3ComFilterPortGroupNextAvailableIndex when
a new port group needs to be created.ro INTEGER .1.3.6.1.4.1.43.29.4.20.2.4.1.1 |
a3ComFilterPortTypeThis indicates interface port type(s) that are currently
supported by LanPlex modules.ro A3ComFilterPortType .1.3.6.1.4.1.43.29.4.20.2.4.1.2 |
a3ComFilterPortPortThe port on the bridge identified by port type.ro INTEGER .1.3.6.1.4.1.43.29.4.20.2.4.1.3 |
a3ComFilterPortStatusThe status column for this port group entry.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Setting this object to createAndGo(4) will result in the agent attempting
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent will add
the corresponding port to the indicated port group.
Setting this object to destroy(6) will remove this port from
corresponding port group.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.2.4.1.4 |
a3ComBridgeFilterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.20.3 |
a3ComBridgeFilterNextAvailableIndexThe value of next available a3ComBridgeFilterId.
This object indicates filter id when a new bridge filter
is created through console or ftp download.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.1 |
a3ComBridgeFilterCountThe count of stored bridge packet filter programs on the
bridge.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.2 |
a3ComBridgeFilterTableThe list of stored bridge packet filter programs on
bridge(s), bridge port(s) and port processing path. SEQUENCE OF A3ComBridgeFilterEntry .1.3.6.1.4.1.43.29.4.20.3.3 |
a3ComBridgeFilterEntryThe set of parameters for an individual bridge packet filter
program. A3ComBridgeFilterEntry .1.3.6.1.4.1.43.29.4.20.3.3.1 |
a3ComBridgeFilterIdAn index that uniquely identifies a bridge filter in a system.
Its value will change only if the system is rebooted.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.3.1.1 |
a3ComBridgeFilterBridgeNumberThe bridge index associated with this bridge
filter program.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.3.1.2 |
a3ComBridgeFilterNameThe filter name associated with this entry.ro DisplayString .1.3.6.1.4.1.43.29.4.20.3.3.1.3 |
a3ComBridgeFilterProgramThe bridge filter program.ro DisplayString .1.3.6.1.4.1.43.29.4.20.3.3.1.4 |
a3ComBridgeFilterStatusThe status column for this filter definition entry.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
Creation of bridge filter programs can be performed by:
1. Using the build-in editor of the AdminConsole.
2. Using your own line on an external host, and transferring the
filter program via the AdminConsole.
3. Using the filter program creation tool on an external host, which
builds the filter and transfers it to the LANPlex using SNMP. The
transfer is accomplished using the file transfer MIB in the
LANPlex system MIB.
Setting this object to createAndGo(4) will result in the agent attempting
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
When the state of the row translates to active(1), the agent will add
the corresponding filter to the specified packet processing
path(s) of the bridge port(s) in a bridge.
Setting this object to destroy(6) will remove all corresponding
attributes of the filter table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.3.3.1.5 |
a3ComPortFilterTableThe list of stored bridge packet filter programs on
bridge(s), bridge port(s) and port processing path. SEQUENCE OF A3ComPortFilterEntry .1.3.6.1.4.1.43.29.4.20.3.4 |
a3ComPortFilterEntryThe set of parameters for an individual bridge packet filter
program. A3ComPortFilterEntry .1.3.6.1.4.1.43.29.4.20.3.4.1 |
a3ComPortFilterIdAn index that uniquely identifies a bridge filter on the bridge.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.4.1.1 |
a3ComPortFilterBridgeNumberThe bridge index associated with this bridge
filter program.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.4.1.2 |
a3ComPortFilterBridgePortTypeThis indicates interface port type(s) that are currently
supported by LanPlex modules.ro A3ComFilterPortType .1.3.6.1.4.1.43.29.4.20.3.4.1.3 |
a3ComPortFilterBridgePortPortThe port on the bridge identified by this row's a3ComPortFilterBridgeNumber.ro INTEGER .1.3.6.1.4.1.43.29.4.20.3.4.1.4 |
a3ComPortFilterPktProcessPathThe packet processing path to apply the filter. The value
is a bit mask defined as follows:
Mask Value Path Description
0x1 Xmit All All frames xmitted to segment
connected to the port
0x2 Xmit Multicast Multicast+broadcast frames
xmitted to the segment
connected to the port
0x4 Recv All All frame received by the
port from the segment
connected to the port
0x8 Recv Multicast Multicast+broadcast frames
received by the port from the
segement connected to the
port.
If mask value is set to 0x10, the packet filter will be loaded to
both transmit multicast and receive multicast paths. Once a bridge
filter program has been downloaded to a bridge port path, this
object can be applied to change its value.rw INTEGER .1.3.6.1.4.1.43.29.4.20.3.4.1.5 |
a3ComPortFilterStatusThe status column for this filter definition entry.
This OBJECT can be set to:
active(1)
createAndGo(4)
createAndWait(5)
destroy(6)
The following values may be read:
active(1)
notInService(2)
netReady(3).
Creation of bridge filter programs can be performed by:
1. Using the build-in editor of the AdminConsole.
2. Using your own line on an external host, and transferring the
filter program via the AdminConsole.
3. Using the filter program creation tool on an external host, which
builds the filter and transfers it to the LANPlex using SNMP. The
transfer is accomplished using the file transfer MIB in the
LANPlex system MIB.
Setting this object to active(1) is only valid when the current status
is active or notInService(2).
Setting this object to createAndGo(4) will result in the agent attempt
to create and commit the row based on the contents of the objects in the row.
If all the necessary information is presented in the row and the
values are acceptible to the agent, the agent will change the status to
active(1). If there are any necessary objects are not set, the
agent will reject the creation request.
Setting this object to createAndWait(5) will cause the agent to create
a row in this table. This object will change to notInService(2) if
all the information is present in the row and the values are
acceptible to the agent; otherwise, the agent will set the
status to notReady(3).
When the state of the row translates to active(1), the agent will add
the corresponding filter to the specified packet processing
path(s) of the bridge port(s) in a bridge.
Setting this object to destroy(6) will remove all corresponding
attributes of the filter table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.20.3.4.1.6 |