A3COM-SWITCHING-SYSTEMS-FILE-TRANSFER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-FILE-TRANSFER-MIB.
44
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1213-MIB Unknown .1.3.6.1.4.1.43 |
switchingSystemsMibs OBJECT IDENTIFIER .1.3.6.1.4.1.43.29 |
a3ComSwitchingSystemsMib OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4 |
a3ComSysFtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14 |
a3ComSysFtTableA list of entries which describe file transfers. SEQUENCE OF A3ComSysFtTableEntry .1.3.6.1.4.1.43.29.4.14.1 |
a3ComSysFtTableEntryA description of a particular file transfer entry. A3ComSysFtTableEntry .1.3.6.1.4.1.43.29.4.14.1.1 |
a3ComSysFtIndexA unique index used to identifying this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.14.1.1.1 |
a3ComSysFtDirectionSpecifies the direction of the file transfer.rw Enumeration .1.3.6.1.4.1.43.29.4.14.1.1.2 |
a3ComSysFtLocalStorageTypeThe type of storage on the local system to be
used as the source/destination for the file transfer.rw A3ComSysStorageType .1.3.6.1.4.1.43.29.4.14.1.1.3 |
a3ComSysFtLocalResourceTypeThe type of resource on the local system to be
used as the source/destination for the file transfer.rw A3ComSysResourceType .1.3.6.1.4.1.43.29.4.14.1.1.4 |
a3ComSysFtLocalResourceMaskThe indices of the resources on the local system to
be used as the source/destination for the file transfer.
The type of resource to which these indices apply is
specified by the corresponding value of
a3ComSysFtLocalResourceType. If resourceBridge is used,
a3ComSysFtLocalResourceMask indicates the bridge slot
number the filter code will be downloaded.
For instance, a3ComSysFtLocalResourceMask value of 0x03
indicates bridge slot number 1 and 2.rw A3ComSysResourceBitMask .1.3.6.1.4.1.43.29.4.14.1.1.5 |
a3ComSysFtLocalResourceAttributeAn identifier which specifies the particular resource
attribute on the local system which is the source/destination
of the file transfer. The resource(s) to which this attribute
applies is specified by the corresponding values of
a3ComSysFtLocalResourceType and a3ComSysFtLocalResourceMask.rw OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.1.1.6 |
a3ComSysFtRemoteAddressTypeThe type of address which is specified by the corresponding
value of a3ComSysFtRemoteAddress.rw A3ComSysAddressType .1.3.6.1.4.1.43.29.4.14.1.1.7 |
a3ComSysFtRemoteAddressThe address of the source/destination file on the remote
system.rw OCTET STRING .1.3.6.1.4.1.43.29.4.14.1.1.8 |
a3ComSysFtRemoteFileNameThe full path name of the source/destination file on the
remote system.rw DisplayString .1.3.6.1.4.1.43.29.4.14.1.1.9 |
a3ComSysFtRemoteUserNameThe user name to be used when requesting the file transfer
to/from the remote system.rw DisplayString .1.3.6.1.4.1.43.29.4.14.1.1.10 |
a3ComSysFtRemoteUserPasswordThe password to be used when requesting the file transfer
to/from the remote system. When read, this object returns
a zero length string. Note that, for security reasons,
some ftp servers may insist on a non-zero length user password.rw OCTET STRING .1.3.6.1.4.1.43.29.4.14.1.1.11 |
a3ComSysFtForceTransferSetting this object to true makes the agent ignore
non-fatal (i.e. version/id mismatch) errors encountered
during a file transfer request.rw Enumeration .1.3.6.1.4.1.43.29.4.14.1.1.12 |
a3ComSysFtBytesTransferredThe number of bytes successfully transferred.ro Counter .1.3.6.1.4.1.43.29.4.14.1.1.13 |
a3ComSysFtStatusThe status of the file transfer.ro Enumeration .1.3.6.1.4.1.43.29.4.14.1.1.14 |
a3ComSysFtDetailedStatusDetailed status for the transfer for the particular
local resource attribute specified by the corresponding
values of a3ComSysFtLocalStorageType, a3ComSysFtLocalResourceType,
a3ComSysFtLocalResourceMask, and a3ComSysFtLocalResourceAttribute.
Note that this object is only valid in the case where
a3ComSysFtStatus indicates an error.ro OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.1.1.15 |
a3ComSysFtDetailedStatusStringDetailed status description for the requested transfer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.14.1.1.16 |
a3ComSysFtOwnerStringA string describing the creator/owner of this entry.rw DisplayString .1.3.6.1.4.1.43.29.4.14.1.1.17 |
a3ComSysFtRowStatusThe row status object controls the creation/deletion of rows
in this table. Its semantics are the same as those for the
RowStatus textual convention specified for SNMPv2.
Setting this object to createAndGo(4) is not allowed.
Setting this object to createAndWait(5) causes an entry
to be created with a3ComSysFtRowStatus value of notReady(3).
Setting this object to active(1) causes the transfer to
start for the given row. Objects within the row cannot
be modified once a row has been set to active(1),
Setting this object to destroy(6) causes the corresponding
row to be deleted.
Note that a request to set a row to notInService(2) or
destroy(6) will fail if the current rowStatus value is active(1)
(i.e. a file transfer is currently in progress). This is
necessary since aborting a file transfer may leave the
system in an inconsistent state.
Note that, currently, only a single instance of a row
can be created in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.29.4.14.1.1.18 |
a3ComSysFtProtocolSpecifies the file transfer protocol type.rw Enumeration .1.3.6.1.4.1.43.29.4.14.1.1.19 |
a3ComSysFtResourceAttributes OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.2 |
a3ComSysFtSystemAttributes OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.2.1 |
a3ComSysFtSystemOperationalCode OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.2.1.1 |
a3ComSysFtSystemConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.2.1.2 |
a3ComSysFtSystemBridgeFilterCode OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.2.1.3 |
a3ComSysFtDetailedResourceStatus OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3 |
a3ComSysFtSystemDetailedStatus OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1 |
a3ComSysFtSysStatusNotApplicable OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.1 |
a3ComSysFtSysStatusNoImageLabel OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.2 |
a3ComSysFtSysStatusConfigIdMismatch OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.3 |
a3ComSysFtSysStatusChecksumError OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.4 |
a3ComSysFtSysStatusNvRamError OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.5 |
a3ComSysFtSysStatusFlashError OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.6 |
a3ComSysFtSysStatusNoRoom OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.7 |
a3ComSysFtSysBridgeFilterNotApplicable OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.8 |
a3ComSysFtSysBridgeFilterSyntaxError OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.9 |
a3ComSysFtSysBridgeFilterdownloadError OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.10 |
a3ComSysFtSysBridgeFilterNoRoom OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.14.3.1.11 |