A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB.
96
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
96 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1213-MIB Unknown .1.3.6.1.4.1.43 |
switchingSystemsMibs OBJECT IDENTIFIER .1.3.6.1.4.1.43.29 |
a3ComSwitchingSystemsMib OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4 |
a3ComSysBridgeAddressThresholdEventThe trap that is generated when the number of addresses
stored in the bridge reaches a3ComSysBridgeAddressThreshold. TRAP-TYPE .1.3.6.1.4.1.43.29.4.0.6 |
a3ComSysBridge OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.4.10 |
a3ComSysBridgePortLearnEventThe Trap is generated to inform the network manager of the misbehaved
port. The misbehavior is reported in the Address State. TRAP-TYPE .1.3.6.1.4.1.43.29.4.10.0.60 |
a3ComSysBridgePortRateLimitEventThe Trap is generated to inform the network manager of a misbehaved
port. The port has exceeded one of the port based rate limiting
thresholds and has been placed into the reported state. TRAP-TYPE .1.3.6.1.4.1.43.29.4.10.0.61 |
a3ComSysBridgePortLoopDetectEventThe Trap is generated to inform the network manager of the misbehaved
port. A loop has been detected on this port and the port has been
placed into the reported state. TRAP-TYPE .1.3.6.1.4.1.43.29.4.10.0.62 |
a3ComSysBridgeCountThe count of bridges managed by this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.10.1 |
a3ComSysBridgeTableA list of bridge entries. A single entry exists in this
list for each bridge managed by this agent. SEQUENCE OF A3ComSysBridgeEntry .1.3.6.1.4.1.43.29.4.10.2 |
a3ComSysBridgeEntryA bridge entry contains information about a particular
bridge managed by this agent. A3ComSysBridgeEntry .1.3.6.1.4.1.43.29.4.10.2.1 |
a3ComSysBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.1 |
a3ComSysBridgePortCountThe number of bridge ports that the bridge identified by
this entry controls.ro INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.2 |
a3ComSysBridgeAddressTableSizeThe size of the address table for the bridge identified
by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.3 |
a3ComSysBridgeAddressTableCountThe current count of addresses in the address table for
the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.4 |
a3ComSysBridgeAddressTablePeakCountThe peak count of addresses in the address table for the
bridge identified by this entry, since the system was last
initialized.ro INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.5 |
a3ComSysBridgeAddressThresholdA reporting threshold for the total number of addresses
known for the bridge identified by this entry. When this
threshold is reached, the event
a3ComSysBridgeAddressThresholdEvent is generated. The range of
valid values for setting this object is between 1 and the
corresponding value reported by a3ComSysBridgeAddressTableSize
+ 1 (Note that this range applies to values issued in set
requests. The current value may be outside this range,
for example if the corresponding value of a3ComSysBridgeMode is
changed). Setting this object to one greater than the
address table size disables the generation of
a3ComSysBridgeAddressThresholdEvents since the limit will never
be reached.rw INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.6 |
a3ComSysBridgeModeThe operational mode of the bridge identified by this
entry. Note that bridges which report notSupported(3)
will not support sets of this object, and that the value
notSupported(3) is not a valid value for a set operation.rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.7 |
a3ComSysBridgeBackbonePortThe number of the port selected as the backbone segment
port when the corresponding value of a3ComSysBridgeMode is
is expressMode(1). The value of this object can range
from 1 to the corresponding value of a3ComSysBridgePortCount,
however, some bridges may support only a subset of ports
as backbone ports. If the corresponding value of
a3ComSysBridgeMode is not expressMode(1), the value of this
object is ignored.rw INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.8 |
a3ComSysBridgeIpFragmentationEnabledA flag indicating whether or not IP fragmentation is
enabled on this bridge. Note that bridges which report
notSupported(3) will not support sets of this object, and
that the value notSupported(3) is not a valid value for a
set operation.rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.9 |
a3ComSysBridgeTrFddiTranslationModeThe mode used to describe whether the embedded MAC
addresses are byte-conjugated in order to convert them
from Token Ring format to native FDDI format (and vice
versa), or whether they are left alone (used for traffic
flowing across a FDDI backbone to/from Token Ring end
stations).rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.10 |
a3ComSysBridgeSTPGroupAddressSpanning tree bridge group address. The address cannot be
changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).rw OCTET STRING .1.3.6.1.4.1.43.29.4.10.2.1.11 |
a3ComSysBridgeSTPEnableThis object indicates if spanning tree bridge feature is
enabled or disabled. If enabled this value will equal true(1).rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.12 |
a3ComSysBridgeIpxSnapTranslationEnableThis object indicates if the IPX 802.3-FDDI SNAP Translation
bridge feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supported on all bridges.rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.13 |
a3ComSysBridgeLowLatencyEnableThis object indicates if the bridge low latency
feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supported on all bridges.rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.14 |
a3ComSysBridgeVlanModeThis object indicates the VLAN types that this
bridge will support. Open mode means that each VLAN
within this bridge will be of the Open type; all VLANs
within this bridge will share the same address table.
Closed mode means that each VLAN within this bridge
will be of the Closed type; each VLAN within this
bridge will have its own address table. Mixed mode
means that each VLAN within this bridge with be of
either the Open or Closed type; all Open VLANs will
share the same address table and each Closed VLAN
will have its own address table.rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.15 |
a3ComSysBridgeRateLimitReceiveMulticastThis object limits the number of multicast frames forwarded
by this port over a 1 second interval. The value is set
across all ports on the device.rw INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.16 |
a3ComSysBridgeRateLimitReceiveBroadcastThis object limits the number of broadcast frames forwarded
by this port over a 1 second interval. The value is set
across all ports on the device.rw INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.17 |
a3ComSysBridgeRateLimitReceiveFloodThis object limits the number of frames forwarded that
would normally be flooded by this port over a 1 second
interval. The value is set across all ports on the device.rw INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.18 |
a3ComSysBridgeAddressLearnModeThis object determins the behavior of address management
normal(1) - The device will learn dynamic addresses and
static entries can be added.
secure(2) - Static, management, and control addresses can
be added to a database. If a dynamic address
is seen that does not match an entry in the
database, then the port will be disabled.rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.19 |
a3ComSysBridgeAddressAgingIntervalThis object determines how long (in seconds) a dynamic entry is kept
in the database.rw INTEGER .1.3.6.1.4.1.43.29.4.10.2.1.20 |
a3ComSysBridgeLoopDetectModeThis object determines the behavior of loop detection
enabled(1) - The DA will detect loops and disable
the apporiate port.
disabled(2) - No loop detection mechanism will be enabled.
immediate(3) - If a BPDU is received on a front panel port
then a front panel port will be disabled.
The default value for this object disabled(2).rw Enumeration .1.3.6.1.4.1.43.29.4.10.2.1.21 |
a3ComSysBridgeLoopDetectSrcAddressThis object returns the source address that is used to
determine if a loop is present between client portsro OCTET STRING .1.3.6.1.4.1.43.29.4.10.2.1.22 |
a3ComSysBridgePortTableA list of bridge port entries. A single entry exists in
this list for each bridge port managed by this agent. SEQUENCE OF A3ComSysBridgePortEntry .1.3.6.1.4.1.43.29.4.10.3 |
a3ComSysBridgePortEntryA bridge port entry contains information about a
particular bridge port managed by this agent. A3ComSysBridgePortEntry .1.3.6.1.4.1.43.29.4.10.3.1 |
a3ComSysBridgePortBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.10.3.1.1 |
a3ComSysBridgePortIndexThe index of the bridge port identified by this entry,
within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.3.1.2 |
a3ComSysBridgePortIfIndexThe value of the MIB-II ifIndex corresponding to the
bridge port identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.3.1.3 |
a3ComSysBridgePortReceiveMulticastLimitThis variable limits the number of multicast frames forwarded
by this port over a 1 second interval. The minimum threshold
limit may vary between platforms, but can be determined by multiplying
this value by the swSysBridgePortReceiveMulticastLimitMultiplier
value. For example if this value equals 2, and the
swSysBridgePortReceiveMulticastLimitMultiplier equals 1000 then no
more than 2000 multicast frames per second will be forwarded by this port.
The default value for this object is zero which an infinite rate.rw INTEGER .1.3.6.1.4.1.43.29.4.10.3.1.4 |
a3ComSysBridgePortAddressActionThis object, when read, always returns the value
other(1). The behavior of setting this object to each of
the acceptable values is as follows:
freezeAddress: causes all the learned dynamic
addresses to be converted into static
addresses.
flushAddress: causes all the addresses to be flushed
from the address list for the bridge
port identified by this entry.
flushDynamicAddress:
causes all dynamic addresses to be
flushed from the address list for the
bridge port identified by this entry.rw Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.5 |
a3ComSysBridgePortSpanningTreeFrameReceivedCountsThe number of spanning tree frames received by the
bridge port identified by this entry.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.6 |
a3ComSysBridgePortReceiveBlockedDiscardsThe number of frames discarded by the bridge port
identified by this entry because the receiving bridge port
was not in the 'forwarding' state.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.7 |
a3ComSysBridgePortReceiveMulticastLimitExceededsThe number of times the value of
a3ComSysBridgePortReceiveMulticastLimit was exceeded for the
port identified by this entry.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.8 |
a3ComSysBridgePortReceiveMulticastLimitExceededDiscardsThe number of multicast/broadcast frames discarded by the
bridge port identified by this entry because the
corresponding value of a3ComSysBridgePortReceiveMulticastLimit
was exceeded.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.9 |
a3ComSysBridgePortReceiveSecurityDiscardsThe number of frames discarded by the bridge port
identified by this entry because they contained source
addresses which were statically configured on another
bridge port. A statically configured address (station),
which is not allowed to move, appears to have moved.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.10 |
a3ComSysBridgePortReceiveUnknownDiscardsThe number of frames discarded by the bridge port
identified by this entry because the destination address
was unknown. Note that this counter is only valid for
backbone ports, and only when the bridge is operating in
express mode.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.11 |
a3ComSysBridgePortReceiveOtherDiscardsThe number of frames discarded by the bridge port
identified by this entry because they contained either
invalid (group) source addresses or source addresses
belonging to this bridge (indicative of network loops).ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.12 |
a3ComSysBridgePortReceiveErrorDiscardsThe number of frames discarded by the bridge port
identified by this entry because of internal bridge system
errors (e.g., hardware and software address table
discrepencies).ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.13 |
a3ComSysBridgePortSameSegmentDiscardsThe number of frames discarded by the bridge port
identified by this entry because the destination address
is known on the same network segment as the source address,
i.e., the frame does not need to be bridged.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.14 |
a3ComSysBridgePortTransmitBlockedDiscardsThe number of frames discarded by the bridge port
identified by this entry because the transmitting bridge
port was not in the 'forwarding' state.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.15 |
a3ComSysBridgePortReceiveAllPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined receive all
path filters.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.16 |
a3ComSysBridgePortReceiveMulticastPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined receive
multicast path filters.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.17 |
a3ComSysBridgePortTransmitAllPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined transmit all
path filters.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.18 |
a3ComSysBridgePortTransmitMulticastPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to user defined transmit
multicast path filters.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.19 |
a3ComSysBridgePortForwardedUnicastFramesThe number of unicast frames which this port forwarded
to a single destination port.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.20 |
a3ComSysBridgePortForwardedUnicastOctetsThe number of octets contained in unicast frames
which this port forwarded to a single destination port.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.21 |
a3ComSysBridgePortForwardedMulticastFramesThe number of multicast frames which this port forwarded.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.22 |
a3ComSysBridgePortForwardedMulticastOctetsThe number of octets contained in multicast frames which
this port forwarded.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.23 |
a3ComSysBridgePortFloodedUnicastFramesThe number of unicast frames which this port flooded to
all other ports in the bridge.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.24 |
a3ComSysBridgePortFloodedUnicastOctetsThe number of octets contained in unicast frames which
this port flooded to all other ports in the bridge.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.25 |
a3ComSysBridgePortStpModeThe mode of the bridge port.rw Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.26 |
a3ComSysBridgePortReceiveMulticastLimitFrameTypeThis object identifies the frames type(s) that are to be
counted when determining if the receive multicast limit
has been exceeded for this bridge port. Devices attached
to networks with predominantly high multicast traffic
(e.g. video) should set this value to broadcastOnly(2)
to detect broadcast storms.rw Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.27 |
a3ComSysBridgePortForwardedFramesThe number of frames which this port forwarded.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.28 |
a3ComSysBridgePortReceiveMulticastLimitMultiplierThis variable determines the minimum setting for the multicast
limit threshold. For example if this value equals 1000, and the
a3ComSysBridgePortReceiveMulticastLimit variable equals 2 then
no more than 2000 multicast frames per second will be forwarded
by this port.ro INTEGER .1.3.6.1.4.1.43.29.4.10.3.1.29 |
a3ComSysBridgePortRateLimitReceiveMulticastEnabledThis object determines whether a port participates
in multicast rate limiting set by the object
a3ComSysBridgeRateLimitReceiveMulticastrw Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.30 |
a3ComSysBridgePortRateLimitReceiveBroadcastEnabledThis object determines whether a port participates
in broadcast rate limiting set by the object
a3ComSysBridgeRateLimitReceiveBroadcastrw Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.31 |
a3ComSysBridgePortRateLimitReceiveFloodEnabledThis object determines whether a port participates
in flood rate limiting set by the object
a3ComSysBridgeRateLimitReceiveFloodrw Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.32 |
a3ComSysBridgePortRateLimitReceiveStateThis object returns the bmfrl state of the port
enabled(1) - port is up
disabled(2) - port is down, but not as
a result of BMFRL
bmfrl-disabled(3) - port was disabled
by rate limit softwarero Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.33 |
a3ComSysBridgePortLoopDetectStateThis object returns a reason code that will indicate why
a given port was disable by the Loop Detection software.ro Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.34 |
a3ComSysBridgePortAddressMaxLimitThis object controls the maximum number of unicast addresses
that can be learned or configured on a port. This value is
set on a per port basis. The value can't be set lower than
the current number of addresses on a port.rw INTEGER .1.3.6.1.4.1.43.29.4.10.3.1.35 |
a3ComSysBridgePortAddressStateThis object returns a reason code that will indicate why
a given port was disable, when a3ComDaAddressMode is set
to secure.ro Enumeration .1.3.6.1.4.1.43.29.4.10.3.1.36 |
a3ComSysBridgePortReceiveInternalPathFilteredFramesThe number of frames discarded by the bridge port
identified by this entry due to receive internal
path filters.ro Counter .1.3.6.1.4.1.43.29.4.10.3.1.37 |
a3ComSysBridgePortAddressTableA list of bridge port address information. A single
entry exists in this list for each learned address,
accross all bridge ports and all bridges managed by this
agent. SEQUENCE OF A3ComSysBridgePortAddressEntry .1.3.6.1.4.1.43.29.4.10.5 |
a3ComSysBridgePortAddressEntryAn bridge port address entry contains information about a
particular bridge port address. To create a new entry,
set an instance of a3ComSysBridgePortAddressRemoteAddress with
the address index portion of the instance set to 0, to a
valid value. To remove an entry, set the instance of the
a3ComSysBridgePortAddressType for the entry to invalid(2). A3ComSysBridgePortAddressEntry .1.3.6.1.4.1.43.29.4.10.5.1 |
a3ComSysBridgePortAddressBridgeIndexThe index of the bridge identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.10.5.1.1 |
a3ComSysBridgePortAddressPortIndexThe index of the bridge port identified by this entry,
within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.5.1.2 |
a3ComSysBridgePortAddressIndexThe index of this address entry within the bridge address
table for the bridge identified by this entry. This index
ranges from 1 to the corresponding value of
a3ComSysBridgeAddressTableSize.ro INTEGER .1.3.6.1.4.1.43.29.4.10.5.1.3 |
a3ComSysBridgePortAddressRemoteAddressThe remote MAC address detected on the bridge port
identified by to this entry. Setting this object results
in an attempt to create a new entry in the table. Since
the value of a3ComSysBridgePortAddressIndex is determined
automatically internal to the bridge, a set is only
successful if the index value specified for
a3ComSysBridgePortAddressIndex is zero. A get-next
using the values of a3ComSysBridgePortAddressTypeIndex and
a3ComSysBridgePortAddressPortIndex can be used to determine the
address index assigned to the newly added address entry.rw OCTET STRING .1.3.6.1.4.1.43.29.4.10.5.1.4 |
a3ComSysBridgePortAddressTypeThis object, when read, always returns the value valid(1).
Setting this object to invalid(2) will remove the
corresponding address entry from the table.rw Enumeration .1.3.6.1.4.1.43.29.4.10.5.1.5 |
a3ComSysBridgePortAddressIsStaticA value indicating whether this MAC address was
statically configured or was dynamically learned. Note
that isStatic(1) is only valid for set operations.rw Enumeration .1.3.6.1.4.1.43.29.4.10.5.1.6 |
a3ComSysBridgePortAddressStaticPortIf the corresponding value of the object
a3ComSysBridgePortAddressIsStatic is isStatic(1), this object
indicates the local bridge port index (as reported by
a3ComSysBridgePortLocalIndex) for which this address MAC was
statically configured. If the object
a3ComSysBridgePortAddressIsStatic has the value isDynamic(2),
the value of this object is 0.ro INTEGER .1.3.6.1.4.1.43.29.4.10.5.1.7 |
a3ComSysBridgePortAddressAgeThis object indicates the time, in seconds, elapsed since
a packet containing this address as a source was last seen
on the bridge port identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.5.1.8 |
a3ComSysBridgeStpGroupAddressSpanning tree bridge group address. The address cannot be
changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).
This object can now be found under the a3ComSysBridgeTable
as a3ComSysBridgeSTPGroupAddress.rwobsolete OCTET STRING .1.3.6.1.4.1.43.29.4.10.6 |
a3ComSysBridgeStpEnableThis object indicates if spanning tree bridge feature is
enabled or disabled. If enabled this value will equal true(1).
This object can now be found under the a3ComSysBridgeTable
as a3ComSysBridgeSTPEnable.rwobsolete Enumeration .1.3.6.1.4.1.43.29.4.10.7 |
a3ComSysBridgeVlanPortAddressTableA list of vlan bridge port address information. A single
entry exists in this list for each learned address,
across all vlan bridge ports and all vlan bridges managed
by this agent. SEQUENCE OF A3ComSysBridgeVlanPortAddressEntry .1.3.6.1.4.1.43.29.4.10.8 |
a3ComSysBridgeVlanPortAddressEntryA bridge vlan port address entry contains information about a
particular bridge vlan port address. To create a new entry,
set an instance of a3ComSysBridgeVlanPortAddressRemoteAddress with
the address index portion of the instance set to 0, to a
valid value. To remove an entry, set the instance of the
a3ComSysBridgeVlanPortAddressType for the entry to invalid(2). A3ComSysBridgeVlanPortAddressEntry .1.3.6.1.4.1.43.29.4.10.8.1 |
a3ComSysBridgeVlanPortAddressBridgeIndexThe index of the bridge vlan identified by this entry,
relative to this agent.ro INTEGER .1.3.6.1.4.1.43.29.4.10.8.1.1 |
a3ComSysBridgeVlanPortAddressVlanIndexThe index of the vlan identified by this entry,
within the bridge identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.8.1.2 |
a3ComSysBridgeVlanPortAddressPortIndexThe index of the bridge vlan port identified by this entry,
within the bridge vlan identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.8.1.3 |
a3ComSysBridgeVlanPortAddressIndexThe index of this address entry within the bridge vlan address
table for the bridge identified by this entry. This index
ranges from 1 to the corresponding value of
a3ComSysBridgeAddressTableSize.ro INTEGER .1.3.6.1.4.1.43.29.4.10.8.1.4 |
a3ComSysBridgeVlanPortAddressRemoteAddressThe remote MAC address detected on the bridge vlan port
identified by to this entry. Setting this object results
in an attempt to create a new entry in the table. Since
the value of a3ComSysBridgeVlanPortAddressIndex is determined
automatically internal to the bridge vlan, a set is only
successful if the index value specified for
a3ComSysBridgeVlanPortAddressIndex is zero. A get-next
using the values of a3ComSysBridgeVlanPortAddressTypeIndex and
a3ComSysBridgeVlanPortAddressPortIndex can be used to determine the
address index assigned to the newly added address entry.rw OCTET STRING .1.3.6.1.4.1.43.29.4.10.8.1.5 |
a3ComSysBridgeVlanPortAddressTypeThis object, when read, always returns the value valid(1).
Setting this object to invalid(2) will remove the
corresponding address entry from the table.rw Enumeration .1.3.6.1.4.1.43.29.4.10.8.1.6 |
a3ComSysBridgeVlanPortAddressIsStaticA value indicating whether this MAC address was
statically configured or was dynamically learned. Note
that isStatic(1) is only valid for set operations.rw Enumeration .1.3.6.1.4.1.43.29.4.10.8.1.7 |
a3ComSysBridgeVlanPortAddressStaticPortIf the corresponding value of the object
a3ComSysBridgeVlanPortAddressIsStatic is isStatic(1), this object
indicates the local bridge port index (as reported by
a3ComSysBridgePortLocalIndex) for which this address MAC was
statically configured. If the object
a3ComSysBridgeVlanPortAddressIsStatic has the value isDynamic(2),
the value of this object is 0.ro INTEGER .1.3.6.1.4.1.43.29.4.10.8.1.8 |
a3ComSysBridgeVlanPortAddressAgeThis object indicates the time, in seconds, elapsed since
a packet containing this address as a source was last seen
on the bridge vlan port identified by this entry.ro INTEGER .1.3.6.1.4.1.43.29.4.10.8.1.9 |