Home/Catalog/A3COM-HUAWEI-UNICAST-MIB

A3COM-HUAWEI-UNICAST-MIB

AI MIB Summary

The A3COM-HUAWEI-UNICAST-MIB module enables monitoring and management of unicast routing table entries, forwarding information base (FIB) statistics, and unicast packet counters on A3Com and Huawei network devices. It provides visibility into unicast traffic flow metrics and interface-level forwarding states essential for troubleshooting Layer 3 connectivity and performance.

This MIB is a framework MIB for unicast related features.

Main OID:

h3cUnicast.1.3.6.1.4.1.43.45.1.10.2.44

Objects

Active

Status

Dependencies

Imported Objects

A3COM-HUAWEI-OID-MIB

SNMPv2-SMI

SNMPv2-TC

Objects

9 total

Object Name	Syntax	OID
h3cUnicastThis MIB is a framework MIB for unicast related features. MODULE-IDENTITY `.1.3.6.1.4.1.43.45.1.10.2.44`	MODULE-IDENTITY	`.1.3.6.1.4.1.43.45.1.10.2.44`
h3cURPFTableUnicast Reverse Path Forwarding (URPF) is used to prevent the network attacks caused by source address spoofing. This table is used to configure URPF on specific interfaces. SEQUENCE OF H3cURPFEntry `.1.3.6.1.4.1.43.45.1.10.2.44.1`	SEQUENCE OF H3cURPFEntry	`.1.3.6.1.4.1.43.45.1.10.2.44.1`
h3cURPFEntryThe entry of h3cURPFTable, indexed by vlan interface index. H3cURPFEntry `.1.3.6.1.4.1.43.45.1.10.2.44.1.1`	H3cURPFEntry	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1`
h3cURPFIfIndexThe ifIndex of vlan interface. Integer32 `.1.3.6.1.4.1.43.45.1.10.2.44.1.1.1`	Integer32	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1.1`
h3cURPFEnabledThis object is used to enable or disable URPF on certain vlan interfaces.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.43.45.1.10.2.44.1.1.2`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1.2`
h3cURPFSlotIDThis object specifies to which slot packets are redirected in order to perform URPF check.rw Integer32 `.1.3.6.1.4.1.43.45.1.10.2.44.1.1.3`	Integer32	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1.3`
h3cURPFTotalReceivedPacketThis object provides total received packets number.ro Counter64 `.1.3.6.1.4.1.43.45.1.10.2.44.1.1.4`	Counter64	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1.4`
h3cURPFDroppedPacketThis object provides total dropped invalid packets number.ro Counter64 `.1.3.6.1.4.1.43.45.1.10.2.44.1.1.5`	Counter64	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1.5`
h3cURPFClearStatThis object is used to clear the URPF statistics on certain vlan interfaces. This object is actually a write-only object. When read, it always returns 0. When set to 1, the objects h3cURPFTotalReceivedPacket and h3cURPFDroppedPacket are reset to 0.rw Enumeration `.1.3.6.1.4.1.43.45.1.10.2.44.1.1.6`	Enumeration	`.1.3.6.1.4.1.43.45.1.10.2.44.1.1.6`