A3COM-HUAWEI-STACK-MIB
AI MIB Summary
The A3COM-HUAWEI-STACK-MIB provides SNMP access to monitor and manage the topology, member status, and configuration synchronization of Intelligent Resilient Framework (IRF) stacks on supported A3COM and Huawei devices. It exposes specific metrics for Stack Topology Management (STM), including virtual switch membership states, link aggregation status, and stack unit roles to facilitate centralized monitoring of multi-chassis virtualization environments.
This MIB is used to manage STM (Stack Topology Management) information for IRF (Intelligent Resilient Framework) device. This MIB is applicable to products which support IRF. Some objects in this MIB may be used only for some specific products, so users should refer to the related documents to acquire more detailed information.
Main OID:
h3cStack.1.3.6.1.4.1.43.45.1.10.2.91
33
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
h3cStackThis MIB is used to manage STM (Stack Topology Management) information for IRF (Intelligent Resilient Framework) device. This MIB is applicable to products which support IRF. Some objects in this MIB may be used only for some specific products, so users should refer to the related documents to acquire more detailed information. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.91 |
h3cStackGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.91.1 |
h3cStackMaxMemberThe maximum number of members in a stack.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.1.1 |
h3cStackMemberNumThe number of members currently in a stack.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.1.2 |
h3cStackMaxConfigPriorityThe highest priority that can be configured for a member in a stack.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.1.3 |
h3cStackAutoUpdateThe function for automatically updating the image from master to slave. When a new device tries to join a stack, the image version is checked. When this function is enabled, if the image version of the new device is different from that of the master, the image of the new device will be updated to be consistent with that of the master. When this function is disabled, the new device can not join the stack if the image version of the new device is different from that of the master. disabled: disable auto update function enabled: enable auto update functionrw Enumeration .1.3.6.1.4.1.43.45.1.10.2.91.1.4 |
h3cStackMacPersistenceThe mode of bridge MAC address persistence. When a stack starts, the bridge MAC address of master board will be used as that of the stack. If the master board leaves the stack, the bridge MAC address of the stack will change based on the mode of bridge MAC address persistence. notPersist: The bridge MAC address of the new master board will be used as that of the stack immediately. persistForSixMin: The bridge MAC address will be reserved for six minutes. In this period, if the master board which has left the stack rejoins the stack, the bridge MAC address of the stack will not change. Otherwise, the bridge MAC address of the new master board will be used as that of the stack. persistForever: Whether the master leaves or not, the bridge MAC address of the stack will never change.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.91.1.5 |
h3cStackLinkDelayIntervalThe delay time for a device in a stack to report the change of stack port link status. If the delay time is configured, a device in a stack will not report the change immediately when the stack port link status changes to down. During the delay period, if the stack port link status is resumed, the device will ignore the current change of the stack port link status. If the stack port link status is not resumed after the delay time, the device will report the change. 0 means no delay, namely, the device will report the change as soon as the stack port link status changes to down. 0: no delay 1-30000(ms): delay timerw Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.1.6 |
h3cStackTopologyThe topology of the stack. chainConn: chain connection ringConn: ring connectionro Enumeration .1.3.6.1.4.1.43.45.1.10.2.91.1.7 |
h3cStackDeviceConfigTableThis table contains objects to manage device information in a stack. SEQUENCE OF H3cStackDeviceConfigEntry .1.3.6.1.4.1.43.45.1.10.2.91.2 |
h3cStackDeviceConfigEntryThis table contains objects to manage device information in a stack. H3cStackDeviceConfigEntry .1.3.6.1.4.1.43.45.1.10.2.91.2.1 |
h3cStackMemberIDThe member ID of the device in a stack.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.2.1.1 |
h3cStackConfigMemberIDThe configured member ID of the device. The valid value ranges from 1 to the value of h3cStackMaxMember. After the member ID is configured for a device, if this ID is not the same with that of another device, the ID will be used as the member ID of the device when the device reboots. If a same ID exists, the member ID of the device will be set as another exclusive ID automatically.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.2.1.2 |
h3cStackPriorityThe priority of a device in a stack. The valid value ranges from 1 to the value of h3cStackMaxConfigPriority.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.2.1.3 |
h3cStackPortNumThe number of stack ports which is enabled in a device.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.2.1.4 |
h3cStackPortMaxNumThe maximum number of stack ports in a device.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.2.1.5 |
h3cStackBoardConfigTableThis table contains objects to manage board information of the device in a stack. SEQUENCE OF H3cStackBoardConfigEntry .1.3.6.1.4.1.43.45.1.10.2.91.3 |
h3cStackBoardConfigEntryThis table contains objects to manage board information of the device in a stack. H3cStackBoardConfigEntry .1.3.6.1.4.1.43.45.1.10.2.91.3.1 |
h3cStackBoardRoleThe role of the board in a stack. slave: slave board master: master board loading: slave board whose image version is different from that of the master board. other: otherro Enumeration .1.3.6.1.4.1.43.45.1.10.2.91.3.1.1 |
h3cStackBoardBelongtoMemberThe member ID of the device where the current board resides in a stack.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.3.1.2 |
h3cStackPortInfoTableThis table contains objects to manage stack port information of a device in a stack. SEQUENCE OF H3cStackPortInfoEntry .1.3.6.1.4.1.43.45.1.10.2.91.4 |
h3cStackPortInfoEntryThis table contains objects to manage stack port information of a device in a stack. H3cStackPortInfoEntry .1.3.6.1.4.1.43.45.1.10.2.91.4.1 |
h3cStackPortIndexThe index of a stack port of the device in a stack.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.4.1.1 |
h3cStackPortEnableThe status of the stack port of the device in a stack. If no physical port is added to the stack port, its status is 'disabled'; otherwise, its status is 'enabled'. disabled: The stack port is disabled. enabled: The stack port is enabled.ro Enumeration .1.3.6.1.4.1.43.45.1.10.2.91.4.1.2 |
h3cStackPortStatusThe link status of the stack port of the device in a stack. up: The link status of a stack port with reasonable physical connection is up. down: The link status of a stack port without physical connection is down. silent: The link status of a stack port which can not be used normally is silent. disabled: The link status of a stack port in disabled status is disabled.ro Enumeration .1.3.6.1.4.1.43.45.1.10.2.91.4.1.3 |
h3cStackNeighborThe member ID of the stack port's neighbor in a stack. 0 means no neighbor exists.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.4.1.4 |
h3cStackPhyPortInfoTableThis table contains objects to manage the information for physical ports which can be used for physical connection of stack port in a stack. SEQUENCE OF H3cStackPhyPortInfoEntry .1.3.6.1.4.1.43.45.1.10.2.91.5 |
h3cStackPhyPortInfoEntryThis table contains objects to manage the information for physical ports which can be used for physical connection of stack port in a stack. H3cStackPhyPortInfoEntry .1.3.6.1.4.1.43.45.1.10.2.91.5.1 |
h3cStackBelongtoPortThe index of the stack port to which the physical port is added. 0 means the physical port is not added to any stack port. The value will be valid after the device in the stack reboots.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.91.5.1.1 |
h3cStackTrap OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.91.6 |
h3cStackTrapOjbects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.91.6.0 |
h3cStackPortLinkStatusChangeThe h3cStackPortLinkStatusChange trap indicates that the link status of the stack port has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.91.6.0.1 |
h3cStackTopologyChangeThe h3cStackTopologyChange trap indicates that the topology type of the stack has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.91.6.0.2 |