A3COM-HUAWEI-NQA-MIB
AI MIB Summary
The A3COM-HUAWEI-NQA-MIB extends RFC 2925 to monitor Network Quality Analysis (NQA) test sessions, including probe status, latency, jitter, packet loss, and reachability metrics for Huawei and Acme (A3COM) network devices. This private MIB enables granular visibility into active diagnostic probes and their performance statistics for network health assessment.
The private mib file includes the test information of the device. It is supplementary for rfc2925.txt.
Main OID:
hwNqa.1.3.6.1.4.1.43.45.1.5.25.28
203
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
203 total| Object Name |
|---|
hwNqaThe private mib file includes the test information of the device. It is supplementary for rfc2925.txt. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.5.25.28 |
hwNqaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.1 |
hwNqaMIBVersionVersion string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.5.25.28.1.1 |
hwNqaCtlTableDefines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. SEQUENCE OF HwNqaCtlEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.2 |
hwNqaCtlEntryDefines an entry in the hwNqaCtlTable. The operation of this table is same as that of pingResultsTable. HwNqaCtlEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1 |
hwNqaCtlTargetPortThe destination port that may be used by udpEcho, tcpConnect and jitter probes.rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.1 |
hwNqaCtlSourcePortThe source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.2 |
hwNqaCtlTTLSpecifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.3 |
hwNqaCtlJitterAdminIntervalTime value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.4 |
hwNqaCtlJitterAdminNumPacketsPacket number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.5 |
hwNqaCtlHttpOperationTypeHttp operation type: get or post.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.6 |
hwNqaCtlHttpOperationStringHttp operation string. For example, if the http operation type is get, the string will be url, home page and http version.rw DisplayString .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.7 |
hwNqaCtlFtpOperationTypeFtp operation type.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.8 |
hwNqaCtlFtpUsernameFtp username.rw DisplayString .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.9 |
hwNqaCtlFtpPasswordFtp password.rw DisplayString .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.10 |
hwNqaCtlFtpOperationStringFtp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.rw DisplayString .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.11 |
hwNqaCtlVPNInstanceVPN name by which system finds route in the specified VPN to send NQA probe packets.rw DisplayString .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.12 |
hwNqaCtlHistoryKeptTimeTo indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.13 |
hwNqaCtlHistoryEnableTo indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.14 |
hwNqaCtlICPIFAdvFactorThe advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|rw Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.15 |
hwNqaCtlCodecTypeTo indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.16 |
hwNqaResultsTableDefines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hwNqaResultsTable. The operation of this table is same as that of pingResultsTable. SEQUENCE OF HwNqaResultsEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.3 |
hwNqaResultsEntryThe operation of this table is same as that of pingResultsTable. HwNqaResultsEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1 |
hwNqaResultsRttNumDisconnectsThe number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.1 |
hwNqaResultsRttTimeoutsThe number of times that a NQA probe failed because the probe timed out.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.2 |
hwNqaResultsRttBusiesThe number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.3 |
hwNqaResultsRttNoConnectionsThe number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.4 |
hwNqaResultsRttDropsThe number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.5 |
hwNqaResultsRttSequenceErrorsThe number of packets arrived out of sequence.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.6 |
hwNqaResultsRttStatsErrorsThe number of some other errors.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.7 |
hwNqaResultsMaxDelaySDThe maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.8 |
hwNqaResultsMaxDelayDSThe maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.9 |
hwNqaResultsLostPacketRatioThe value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.10 |
hwNqaResultsPacketLateArrivalThe value of this object indicates the number of the packets that arrived after the timeout.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.11 |
hwNqaResultsRttSumThe sum of round trip time.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.12 |
hwNqaResultsNumOfDelaySDThe number of delay from source to destination that are successfully measured.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.13 |
hwNqaResultsMinDelaySDThe minimum of all one way times from source to destination.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.14 |
hwNqaResultsSumDelaySDThe sum of one way times from source to destination.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.15 |
hwNqaResultsSum2DelaySDThe sum of squares of one way times from source to destination.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.16 |
hwNqaResultsNumOfDelayDSThe number of delay from destination to source that are successfully measured.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.17 |
hwNqaResultsMinDelayDSThe minimum of all one way times from destination to source.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.18 |
hwNqaResultsSumDelayDSThe sum of one way times from destination to source.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.19 |
hwNqaResultsSum2DelayDSThe sum of squares of one way times from destination to source.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.20 |
hwNqaJitterStatsTableStatistics table for latest jitter activity. SEQUENCE OF HwNqaJitterStatsEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.4 |
hwNqaJitterStatsEntryAn entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hwNqajitter. HwNqaJitterStatsEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1 |
hwNqaJitterStatsNumOfRTTThe number of received destination device responses with which jitter test can reach round-trip time.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.1 |
hwNqaJitterStatsMinOfPositivesSDThe value of time that records the minimal positive jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.2 |
hwNqaJitterStatsMaxOfPositivesSDThe value of time that records the maximal positive jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.3 |
hwNqaJitterStatsNumOfPositivesSDThe number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.4 |
hwNqaJitterStatsSumOfPositivesSDThe value of time that records the sum of positive jitter values from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.5 |
hwNqaJitterStatsSum2PositivesSDThe value of time that records the sum of square of positive jitter values from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.6 |
hwNqaJitterStatsMinOfNegativesSDThe value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.7 |
hwNqaJitterStatsMaxOfNegativesSDThe value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.8 |
hwNqaJitterStatsNumOfNegativesSDThe number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.9 |
hwNqaJitterStatsSumOfNegativesSDThe value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.10 |
hwNqaJitterStatsSum2NegativesSDThe value of time that records the sum of square of negative jitter values from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.11 |
hwNqaJitterStatsMinOfPositivesDSThe value of time that records the minimal positive jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.12 |
hwNqaJitterStatsMaxOfPositivesDSThe value of time that records the maximal positive jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.13 |
hwNqaJitterStatsNumOfPositivesDSThe number that records positive jitter times from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.14 |
hwNqaJitterStatsSumOfPositivesDSThe value of time that records the sum of positive jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.15 |
hwNqaJitterStatsSum2PositivesDSThe value of time that records the sum of square of positive jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.16 |
hwNqaJitterStatsMinOfNegativesDSThe value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.17 |
hwNqaJitterStatsMaxOfNegativesDSThe value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.18 |
hwNqaJitterStatsNumOfNegativesDSThe number that records negative jitter times from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.19 |
hwNqaJitterStatsSumOfNegativesDSThe value of time that records the sum of negative jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.20 |
hwNqaJitterStatsSum2NegativesDSThe value of time that records the sum of square of negative jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.21 |
hwNqaJitterStatsPacketLossSDThe lost packets number sent from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.22 |
hwNqaJitterStatsPacketLossDSThe lost packets number sent from destination to source.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.23 |
hwNqaJitterStatsAvePositivesSDThe value of time that records the average positive jitter value from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.24 |
hwNqaJitterStatsAveNegativesSDThe value of time that records the average negative jitter value from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.25 |
hwNqaJitterStatsAvePositivesDSThe value of time that records the average positive jitter value from destination to source.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.26 |
hwNqaJitterStatsAveNegativesDSThe value of time that records the average negative jitter value from destination to source.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.27 |
hwNqaJitterStatsPktLossUnknownThe number of packets which is lost with unknown reason.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.28 |
hwNqaJitterStatsOperOfICPIFThe ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.29 |
hwNqaJitterStatsOperOfMOSThe MOS (Mean Opinion Score) value for the latest jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.30 |
hwNqaAgentEnableEnable NQA agent function.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.5 |
hwNqaTcpServerTableA table which contains the status of NQA tcp server configuration information. SEQUENCE OF HwNqaTcpServerEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.6 |
hwNqaTcpServerEntryA table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port. HwNqaTcpServerEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.6.1 |
hwNqaTcpServerIpAddressTcp server's ip address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.1 |
hwNqaTcpServerPortTcp server's port number. Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.2 |
hwNqaTcpServerRowStatushwNqaTcpServerIpAddress and hwNqaTcpServerPort must be set during a creation operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.3 |
hwNqaUdpServerTableStatus of NQA udp server configuration information. SEQUENCE OF HwNqaUdpServerEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.7 |
hwNqaUdpServerEntryThis entry includes not only the udp server ip address but also the udp server udp port. HwNqaUdpServerEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.7.1 |
hwNqaUdpServerIpAddressUdp server's ip address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.1 |
hwNqaUdpServerPortUdp server's port number. Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.2 |
hwNqaUdpServerRowStatushwNqaUdpServerIpAddress and hwNqaUdpServerPort must be set during a creation operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.3 |
hwNqaServerEnableEnable NQA server function.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.8 |
hwNqaStatsMaxGroupNumberThe maximum number saved per group. The maximum value of hwNqaCtlStatisticsGroupNumber can not exceed the value of this object.ro Integer32 .1.3.6.1.4.1.43.45.1.5.25.28.1.9 |
hwNqaStatisticsCtlTableDefines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hwNqaStatisticsResultsTable and the hwNqaGroupStatsJitterTable. SEQUENCE OF HwNqaStatisticsCtlEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.10 |
hwNqaStatisticsCtlEntryDefines an entry in the hwNqaStatisticsCtlTable. The hwNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hwNqaStatisticsCtlTable to correspond to the pingCtlEntry. HwNqaStatisticsCtlEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.10.1 |
hwNqaCtlStatisticsIntervalStatistic information will be calculated after the time that is the value of hwNqaCtlStatisticsInterval.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.1 |
hwNqaCtlStatisticsGroupNumberThe value of this object indicates the number of group saved. The length of this object is from 1 to hwNqaStatsMaxGroupNumber.rw Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.2 |
hwNqaCtlStatisticsKeptTimeTo indicate how long the statistic information will be saved after the test stops.rw Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.3 |
hwNqaCtlBeginTimeTime at which the type-specified test will start.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.4 |
hwNqaCtlLifeTimeTo indicate how long the type-specified test will last.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.5 |
hwNqaStatisticsResultsTableDefines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hwNqaStatisticsResultsTable. The statistic cycle is the value of hwNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (HwNqaStatisticsResultsEntry) belongs to. SEQUENCE OF HwNqaStatisticsResultsEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.11 |
hwNqaStatisticsResultsEntryDefines an entry in the hwNqaStatisticsResultsTable. The hwNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hwNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created. HwNqaStatisticsResultsEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1 |
hwNqaStatResIndexAn entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hwNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). Unsigned32(1..'ffffffff'h) .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.1 |
hwNqaStatResIpTargetAddressTypeThis object indicates the type of address stored in the corresponding hwNqaStatResIpTargetAddress object.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.2 |
hwNqaStatResIpTargetAddressThis object represent the host address to be used at a remote host for performing a network analysis operation.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.3 |
hwNqaStatResMinRttThe minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.4 |
hwNqaStatResMaxRttThe maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.5 |
hwNqaStatResAverageRttThe average NQA probe round-trip-time (RTT).ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.6 |
hwNqaStatResProbeResponsesThe number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.7 |
hwNqaStatResSentProbesThe value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.ro Counter32 UNITS "probes" .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.8 |
hwNqaStatResRttSumOfSquaresThis object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.9 |
hwNqaStatResStartTimeThis object contains the start time of the statistic.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.10 |
hwNqaStatResIntervalThis object contains the interval between two times of statistic.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.11 |
hwNqaStatResRttNumDisconnectsThe number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.12 |
hwNqaStatResRttTimeoutsThe number of times that a probe failed because the probe timed out.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.13 |
hwNqaStatResRttBusiesThe number of times that a NQA probe failed because errors related to sockets.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.14 |
hwNqaStatResRttNoConnectionsThe number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.15 |
hwNqaStatResRttDropsThe number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.16 |
hwNqaStatResRttSequenceErrorsThe number of packets arrived out of sequence.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.17 |
hwNqaStatResRttErrorsThe number of other errors.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.18 |
hwNqaStatResLostPacketRatioThe value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.19 |
hwNqaStatResPacketLateArrivalThe value of this object reflects the number of the packets that arrived after the timeout.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.20 |
hwNqaStatResRttSumThis object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.21 |
hwNqaStatResNumOfDelaySDThe number of one way times from source to destination that are successfully measured.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.22 |
hwNqaStatResMinDelaySDThe minimum one way times from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.23 |
hwNqaStatResMaxDelaySDThe maximum one way times from source to destination.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.24 |
hwNqaStatResSumDelaySDThe sum of one way times from source to destination.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.25 |
hwNqaStatResSum2DelaySDThe sum of squares of one way times from source to destination.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.26 |
hwNqaStatResNumOfDelayDSThe number of one way times from destination to source that are successfully measured.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.27 |
hwNqaStatResMinDelayDSThe minimum one way times from destination to source.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.28 |
hwNqaStatResMaxDelayDSThe maximum one way times from destination to source.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.29 |
hwNqaStatResSumDelayDSThe sum of one way times from destination to source.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.30 |
hwNqaStatResSum2DelayDSThe sum of squares of one way times from destination to source.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.31 |
hwNqaGroupStatsJitterTableTest Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hwNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (HwNqaStatisticsResultsEntry) belongs to. SEQUENCE OF HwNqaGroupStatsJitterEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.12 |
hwNqaGroupStatsJitterEntryAn entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hwNqajitter. HwNqaGroupStatsJitterEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1 |
hwNqaStatJitterIndexAn entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hwNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). Unsigned32(1..'ffffffff'h) .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.1 |
hwNqaStatJitterMinOfPosSDThe value of time that records the minimal positive jitter value from source to destination in jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.2 |
hwNqaStatJitterMaxOfPosSDThe value of time that records the maximal positive jitter value from source to destination in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.3 |
hwNqaStatJitterNumOfPosSDThe number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent from source to destination.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.4 |
hwNqaStatJitterSumOfPosSDThe value of time that records the sum of positive jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.5 |
hwNqaStatJitterSumOfSquarePosSDThe value of time that records the sum of square of positive jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.6 |
hwNqaStatJitterMinOfNegSDThe value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.7 |
hwNqaStatJitterMaxOfNegSDThe value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.8 |
hwNqaStatJitterNumOfNegSDThe number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to destination.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.9 |
hwNqaStatJitterSumOfNegSDThe value of time that records the sum of negative jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.10 |
hwNqaStatJitterSumOfSquareNegSDThe value of time that records the sum of square of negative jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.11 |
hwNqaStatJitterMinOfPosDSThe value of time that records the minimal positive jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.12 |
hwNqaStatJitterMaxOfPosDSThe value of time that records the maximal positive jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.13 |
hwNqaStatJitterNumOfPosDSThe number that records positive jitter times from destination to source in the jitter test.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.14 |
hwNqaStatJitterSumOfPosDSThe value of time that records the sum of positive jitter values from destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.15 |
hwNqaStatJitterSumOfSquarePosDSThe value of time that records the sum of square of positive jitter values destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.16 |
hwNqaStatJitterMinOfNegDSThe value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.17 |
hwNqaStatJitterMaxOfNegDSThe value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.18 |
hwNqaStatJitterNumOfNegDSThe number that records negative jitter times from destination to source in the jitter test.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.19 |
hwNqaStatJitterSumOfNegDSThe value of time that records the sum of negative jitter values from destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.20 |
hwNqaStatJitterSumOfSquareNegDSThe value of time that records the sum of square of negative jitter values from destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.21 |
hwNqaStatJitterPacketLossSDThe lost packets number sent from source to destination.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.22 |
hwNqaStatJitterPacketLossDSThe lost packets number sent from destination to source.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.23 |
hwNqaStatJitterAvePosSDThe value of time that records the average positive jitter value from source to destination.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.24 |
hwNqaStatJitterAveNegSDThe value of time that records the average negative jitter value from source to destination.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.25 |
hwNqaStatJitterAvePosDSThe value of time that records the average positive jitter value from destination to source.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.26 |
hwNqaStatJitterAveNegDSThe value of time that records the average negative jitter value from destination to source.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.27 |
hwNqaStatJitterPktLossUnknownThe number of packets which is lost with unknown reason.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.28 |
hwNqaStatJitterMaxOfICPIFThe maximum of all ICPIF values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.29 |
hwNqaStatJitterMinOfICPIFThe minimum of all ICPIF values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.30 |
hwNqaStatJitterMaxOfMOSThe maximum of all MOS values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.31 |
hwNqaStatJitterMinOfMOSThe minimum of all MOS values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.32 |
hwNqaReactionTableA table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. SEQUENCE OF HwNqaReactionEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.13 |
hwNqaReactionEntryDefines an entry in the hwNqaReactionTable.The first two index elements identify the pingCtlEntry that a hwNqaReactItemIndex belongs to. The third index element selects a single reaction. HwNqaReactionEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1 |
hwNqaReactOwnerIndexThe first index of hwNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hwNqaReactOwnerIndex and hwNqaReactTestName identify an existed test.ro SnmpAdminString .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.1 |
hwNqaReactTestNameThe second index of hwNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hwNqaReactOwnerIndex and hwNqaReactTestName identify an existed test.ro SnmpAdminString .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.2 |
hwNqaReactItemIndexThe third index of hwNqaReactionTable, it definitely identifies one of the reaction configurations for a test.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.3 |
hwNqaReactCheckedElementA list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hwNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is hwNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.4 |
hwNqaReactThresholdUpperLimitThis object defines an administrative upper-threshold value for hwNqaReactCheckedElement. The value of this object is zero if hwNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.rw Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.5 |
hwNqaReactThresholdLowerLimitThis object defines an administrative lower-threshold value for hwNqaReactCheckedElement. The value of hwNqaReactThresholdLowerLimit should be equal or less than the value of hwNqaReactThresholdUpperLimit. The value of this object is zero if hwNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.rw Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.6 |
hwNqaReactThresholdTypeThis object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in hwNqaReactActionType is generated when hwNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by hwNqaReactThresholdConsecNum, an action specified in hwNqaReactActionType is generated when hwNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by hwNqaReactThresholdAccumNum, an action specified in hwNqaReactActionType is generated when hwNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.rw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.7 |
hwNqaReactThresholdConsecNumThis object defines a consecutive threshold limit. The value is zero when hwNqaReactThresholdType is not 'consecutive'.rw Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.8 |
hwNqaReactThresholdAccumNumThis object defines an accumulative threshold limit. The value is zero when the hwNqaReactThresholdType is not 'accumulative'.rw Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.9 |
hwNqaReactActionTypeSpecifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generatedrw Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.10 |
hwNqaReactCurrentStatusSpecifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry has met the hwNqaReactThresholdType and the threshold value. belowThreshold - Specifies the reaction entry has disobeyed the hwNqaReactThresholdType and the threshold value.ro Enumeration .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.11 |
hwNqaReactRowStatusThis object allows entries to be created and deleted in the hwNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.12 |
hwNqaReactCheckedNumThe number of checked element samples that are monitored.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.13 |
hwNqaReactThresholdNumThe number of checked element samples that are over threshold.ro Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.14 |
hwNqaStatisticsReactionTableA table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. SEQUENCE OF HwNqaStatisticsReactionEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.14 |
hwNqaStatisticsReactionEntryDefines an entry in the hwNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hwNqaReactItemIndex belongs to. The third index element identifies an entry in the hwNqaStatisticsResultsTable. The forth index element selects a single reaction. HwNqaStatisticsReactionEntry .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1 |
hwNqaStatReactOwnerIndexThe first index of hwNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. SnmpAdminString .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.1 |
hwNqaStatReactTestNameThe second index of hwNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. SnmpAdminString .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.2 |
hwNqaStatReactIndexThe third index of hwNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hwNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.3 |
hwNqaStatReactItemIndexThe forth index of hwNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test Unsigned32 .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.4 |
hwNqaStatReactCheckedNumThe number of checked element samples that are monitored.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.5 |
hwNqaStatReactThresholdNumThe number of checked element samples that are over threshold.ro Counter32 .1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.6 |
hwNqaImplementationTypeDomains OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2 |
hwNqaUdpEchoIndicates that an implementation is using the UDP based echo server. Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hwNqaCtlTargetPort must be set to the default value. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.1 |
hwNqaTcpconnectIndicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hwNqaCtlTargetPort must be set to the default value. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.2 |
hwNqajitterIndicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.3 |
hwNqaHttpIndicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.4 |
hwNqadlswIndicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.5 |
hwNqadhcpIndicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.6 |
hwNqaftpIndicates that an implementation is using tcp packet for ftp connect and data transfer. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.2.7 |
hwNqaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.5.25.28.3 |
hwNqaProbeTimeOverThresholdIt is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdConsecNum. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hwNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.1 |
hwNqaJitterRTTOverThresholdIt is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum in one test. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.2 |
hwNqaProbeFailureIt is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hwNqaReactThresholdAccumNum in one test while the value of hwNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hwNqaReactThresholdConsecNum in one test while the value of hwNqaReactThresholdType is 'consecutive'. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hwNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.3 |
hwNqaJitterPacketLossIt is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in hwNqaReactThresholdAccumNum in one test while the value of hwNqaReactThresholdType is 'accumulative'. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.4 |
hwNqaJitterSDOverThresholdThe SD means the jitter values from source to destination. It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit and the hwNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum and the hwNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.5 |
hwNqaJitterDSOverThresholdThe DS means the jitter values from destination to source. It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit and the hwNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum and the hwNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.6 |
hwNqaICPIFOverThresholdIt is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.7 |
hwNqaMOSOverThresholdIt is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit. This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' , pingCtlType of the test is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.5.25.28.3.8 |
More MIBs from 3Com
Browse all 3ComMIBs →A3Com-products-MIB
Standard SNMP MIB module defining data structures for A3Com-products-MIB.
1546 objects→
A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
1462 objects→
A3COM-HUAWEI-CBQOS2-MIB
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
472 objects→
A3COM-HUAWEI-DOT11-APMT-MIB
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
472 objects→
A3COM-SWITCHING-SYSTEMS-MIB
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
425 objects→
A3COM-HUAWEI-EPON-MIB
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.
424 objects→