A3COM-HUAWEI-MPM-MIB
The A3COM-HUAWEI-MPM-MIB facilitates the monitoring and management of multicast port states, group memberships, and forwarding statistics on Huawei and 3Com network devices. It provides granular visibility into multicast session counts, interface participation, and protocol-specific counters required for troubleshooting Layer 2 and Layer 3 multicast traffic flow.
Imported Objects
Objects
30 total| Object Name |
|---|
h3cMpmThe MPM (Multicast Port Management) MIB. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.51 |
h3cMPMObject OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.51.1 |
h3cMPortGroupLimitMinNumberThe lower limit of group-limit number.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.51.1.1 |
h3cMPortGroupLimitMaxNumberThe upper limit of group-limit number.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.51.1.2 |
h3cMPMTable OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.51.2 |
h3cMPortGroupJoinTableA table which is used for configuring a port in a specified VLAN to join a multicast group. SEQUENCE OF H3cMPortGroupJoinEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.1 |
h3cMPortGroupJoinEntryAn entry which is used for configuring a port in a specified VLAN to join a multicast group. H3cMPortGroupJoinEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.1.1 |
h3cMPortGroupJoinVlanIDAn index uniquely identifying a port in a specified VLAN which joined the multicast group. Integer32 .1.3.6.1.4.1.43.45.1.10.2.51.2.1.1.1 |
h3cMPortGroupJoinAddressTypeType of the multicast IP address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.51.2.1.1.2 |
h3cMPortGroupJoinAddressIP address of the group which the port belongs to, and it must be a valid multicast IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.51.2.1.1.3 |
h3cMPortGroupJoinStatusThis object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo', 'destroy'. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the h3cMPortGroupJoinStatus column is 'notReady'. In particular, a newly created row cannot be actived until the port belongs to the corresponding VLAN and IGMP or IGMP snooping is enabled on that VLAN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.51.2.1.1.4 |
h3cMPortGroupTableA table containing information about the status of a port which joined a multicast group in the VLAN. SEQUENCE OF H3cMPortGroupEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.2 |
h3cMPortGroupEntryAn entry containing information about the status of a port which joined a multicast group in the VLAN. H3cMPortGroupEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.2.1 |
h3cMPortGroupVlanIDAn index uniquely identifies that a port belongs to a specified VLAN. Integer32 .1.3.6.1.4.1.43.45.1.10.2.51.2.2.1.1 |
h3cMPortGroupAddressTypeType of multicast IP address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.51.2.2.1.2 |
h3cMPortGroupAddressIP address of the group which the port joined, and it must be a valid multicast IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.51.2.2.1.3 |
h3cMPortConfigTableA table configuring the fast leave status, group limit number and group policy parameter on a port in the specified VLAN. SEQUENCE OF H3cMPortConfigEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.3 |
h3cMPortConfigEntryAn entry containing information about the fast leave status, group limit number and group policy parameter of a port in the specified VLAN. H3cMPortConfigEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1 |
h3cMPortConfigVlanIDThe VLAN index. Integer32 .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1.1 |
h3cMPortGroupLimitNumberThe group limit number of the port.rw Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1.2 |
h3cMPortFastLeaveStatusThe fast leave status of the port.rw EnabledStatus .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1.3 |
h3cMPortGroupPolicyParameterThe ACL number which is used as the group policy parameter of the port.rw Integer32(0|2000..2999) .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1.4 |
h3cMPortConfigRowStatusThe object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo' and 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1.5 |
h3cMPortGroupLimitReplaceThis object is related to the object h3cMPortGroupLimitNumber. If the current IGMP group number is less than the value of h3cMPortGroupLimitNumber, any new IGMP group is permitted. If the current IGMP group number equals to the value of h3cMPortGroupLimitNumber and the value of this object is enabled, the group with the minimum multicast address will be replaced by the new group. If the current IGMP group number equals to the value of h3cMPortGroupLimitNumber and the value of this object is disabled, none of new group will be permitted.rw EnabledStatus .1.3.6.1.4.1.43.45.1.10.2.51.2.3.1.6 |
h3cHostStaticJoinTableA table used to configure a host on a port in a specified VLAN statically to join a multicast group. SEQUENCE OF H3cHostStaticJoinEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.4 |
h3cHostStaticJoinEntryAn entry used to configure a host on a port in a specified VLAN statically to join a multicast group. H3cHostStaticJoinEntry .1.3.6.1.4.1.43.45.1.10.2.51.2.4.1 |
h3cHostStaticJoinVlanIDAn index uniquely identify the specified VLAN in which a host on a port statically joined the multicast group. Integer32 .1.3.6.1.4.1.43.45.1.10.2.51.2.4.1.1 |
h3cHostStaticJoinAddressTypeType of the multicast IP address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.51.2.4.1.2 |
h3cHostStaticJoinAddressIP address of the group which the host belongs to, and it must be a valid multicast IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.51.2.4.1.3 |
h3cHostStaticJoinStatusThis object is responsible for managing rows, which supports 'active', 'createAndGo' and 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.51.2.4.1.4 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.