A3COM-HUAWEI-MIRRORGROUP-MIB
The A3COM-HUAWEI-MIRRORGROUP-MIB manages port mirroring configurations on A3COM and Huawei network devices by exposing objects for defining, enabling, and monitoring traffic mirroring groups and their associated session parameters.
Imported Objects
Objects
30 total| Object Name |
|---|
h3cMirrGroupThis MIB defines objects for managing mirror group. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.68 |
h3cMGInfoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.68.1 |
h3cMGObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.68.1.1 |
h3cMGTableA list of mirror group entries. SEQUENCE OF H3cMGEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.1.1 |
h3cMGEntryA list of parameters that describe a mirror group to be created. H3cMGEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.1.1.1 |
h3cMGIDAn index that uniquely identifies an entry in the mirror group table. Integer32 .1.3.6.1.4.1.43.45.1.10.2.68.1.1.1.1.1 |
h3cMGTypeGroupType.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.68.1.1.1.1.2 |
h3cMGStatusThe status of a mirror group. A mirror group will be inactive when it was created. The status of a mirror group can be changed automatically from inactive to active when appropriate conditions were met, also, it can be changed automatically from active to inactive when these conditions disappeared. Followings are conditions for a mirror group to become active: group type conditions ============================================================================ local mirroring-port, monitor-port remoteSource mirroring-port, remote-probe vlan, reflector-port(may not be supported by some products) remoteDestination monitor-port, remote-probe vlanro Enumeration .1.3.6.1.4.1.43.45.1.10.2.68.1.1.1.1.3 |
h3cMGRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.68.1.1.1.1.4 |
h3cMGMirrorIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.68.1.2 |
h3cMGMirrorIfTableA list of mirror group mirroring-port entries. SEQUENCE OF H3cMGMirrorIfEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.2.1 |
h3cMGMirrorIfEntryA list of parameters that describe a mirroring-port to be added to a mirror group. H3cMGMirrorIfEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.2.1.1 |
h3cMGMirrorIfIndexIfIndex of mirror group mirroring-port. Integer32 .1.3.6.1.4.1.43.45.1.10.2.68.1.2.1.1.1 |
h3cMGMirrorDirectionMirror direction of mirroring-port. Once mirror direction was configured for a mirroring-port, it can not be changed unless the mirroring-port was removed from mirror group. If a mirror port is configured with two mirror directions 'outbound' and 'inbound', though it is functionally equal to 'both', it will be handled as two table items. If a mirror port is configured with mirror direction 'outbound' or 'inbound', or both of them, it will not be allowed to configure 'both', more details please refer to mirror group manual. Enumeration .1.3.6.1.4.1.43.45.1.10.2.68.1.2.1.1.2 |
h3cMGMirrorRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.68.1.2.1.1.3 |
h3cMGMonitorIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.68.1.3 |
h3cMGMonitorIfTableA list of mirror group monitor-port entries. SEQUENCE OF H3cMGMonitorIfEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.3.1 |
h3cMGMonitorIfEntryA list of parameters that describe a monitor-port to be added to a mirror group. H3cMGMonitorIfEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.3.1.1 |
h3cMGMonitorIfIndexIfIndex of mirror group monitor-port. Integer32 .1.3.6.1.4.1.43.45.1.10.2.68.1.3.1.1.1 |
h3cMGMonitorRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.68.1.3.1.1.2 |
h3cMGReflectorIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.68.1.4 |
h3cMGReflectorIfTableA list of mirror group reflector-port entries. SEQUENCE OF H3cMGReflectorIfEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.4.1 |
h3cMGReflectorIfEntryA list of parameters that describe a reflector-port to be added to a mirror group. H3cMGReflectorIfEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.4.1.1 |
h3cMGReflectorIfIndexIfIndex of mirror group reflector-port. Integer32 .1.3.6.1.4.1.43.45.1.10.2.68.1.4.1.1.1 |
h3cMGReflectorRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.68.1.4.1.1.2 |
h3cMGRprobeVlanObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.68.1.5 |
h3cMGRprobeVlanTableA list of mirror group remote-probe vlan entries. SEQUENCE OF H3cMGRprobeVlanEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.5.1 |
h3cMGRprobeVlanEntryA list of parameters that describe a remote-probe vlan to be added to a mirror group. Details about remote-probe vlan please refer to mirror group manual. H3cMGRprobeVlanEntry .1.3.6.1.4.1.43.45.1.10.2.68.1.5.1.1 |
h3cMGRprobeVlanIDAn index that uniquely identifies an entry in the remote-probe vlan table. Integer32 .1.3.6.1.4.1.43.45.1.10.2.68.1.5.1.1.1 |
h3cMGRprobeVlanRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.68.1.5.1.1.2 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.