A3COM-HUAWEI-MAC-INFORMATION-MIB
AI MIB Summary
The A3COM-HUAWEI-MAC-INFORMATION-MIB enables remote SNMP monitoring of dynamic MAC address table changes and configuration parameters on A3Com and Huawei network switches. This module specifically exposes metrics related to MAC address aging, learning events, and interface binding states to facilitate real-time network topology and security auditing.
This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device.
Main OID:
h3cMACInformation.1.3.6.1.4.1.43.45.1.10.2.87
31
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
h3cMACInformationThis MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.87 |
h3cMACInformationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1 |
h3cMACInformationMibGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.1 |
h3cMACInformationEnabledThe value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop working even there are interfaces that have been enabled the feature.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.87.1.1.1 |
h3cMACInformationcSendIntervalThe maximum interval that the device generate syslogs or traps. The unit is second.rw Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.1.2 |
h3cMACInformationLearntMACNumThe number of MAC addresses that learnt by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACLearntEnable is set to enabled(1) at least on one interface. If the h3cMACInformationEnabled is set to disabled(2), the object will always return 0.ro Counter32 .1.3.6.1.4.1.43.45.1.10.2.87.1.1.3 |
h3cMACInformationRemovedMACNumThe number of MAC addresses that removed by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACRemovedEnable is set to enabled(1) at least on one interface. If the h3cMACInformationEnabled is set to disabled(2), the object will always return 0.ro Counter32 .1.3.6.1.4.1.43.45.1.10.2.87.1.1.4 |
h3cMACInformationTrapSendNumThe number of traps that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to trap(1). If the h3cMACInfomationWorkMode is set to syslog(2), the object will always return 0.ro Counter32 .1.3.6.1.4.1.43.45.1.10.2.87.1.1.5 |
h3cMACInformationSyslogSendNumThe number of syslogs that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to syslog(2). If the h3cMACInfomationWorkMode is set to trap(1), the object will always return 0.ro Counter32 .1.3.6.1.4.1.43.45.1.10.2.87.1.1.6 |
h3cMACInformationCacheLenThe maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as soon as there is a MAC address learnt or removed.rw Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.1.7 |
h3cMACInfomationWorkModeThe working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all properties of trap interrelated is valid. If the object is set to syslog(2), the device will use syslog mode to notify the MAC address information and all properties of trap interrelated is invalid.rw H3cMACInfoWorkMode .1.3.6.1.4.1.43.45.1.10.2.87.1.1.8 |
h3cMACInformationMIBTableTroop OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.2 |
h3cMACInfomationIfTableThe table is used to enable or disable the MAC Information feature on interfaces. SEQUENCE OF H3cMACInfomationIfEntry .1.3.6.1.4.1.43.45.1.10.2.87.1.2.1 |
h3cMACInfomationIfEntryThe entry of h3cMACInfomationIfTable. H3cMACInfomationIfEntry .1.3.6.1.4.1.43.45.1.10.2.87.1.2.1.1 |
h3cMACLearntEnableIf the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.87.1.2.1.1.1 |
h3cMACRemovedEnableIf the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.87.1.2.1.1.2 |
h3cMACInformationMibTrap OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.3 |
h3cMACInformationTraps OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.3.0 |
h3cMACInformationChangedTrapWhen the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by h3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when h3cMACInfomationWorkMode is set to trap(1). When the h3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even h3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.87.1.3.0.1 |
h3cMACInformationTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.3.2 |
h3cMACInfoTrapIndexThe sequence number of trap information. When it reaches the maximum value, it should be set to 1.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.3.2.1 |
h3cMACInfoTrapCountThe cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.3.2.2 |
h3cMACInfoTrapMsgThis object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 12 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - WAPI <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 2 octets.ro OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.87.1.3.2.3 |
h3cMACInformationMibTrapExt OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.4 |
h3cMACInformationTrapsExt OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.4.0 |
h3cMACInformationChangedTrapExtWhen the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by h3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when h3cMACInfomationWorkMode is set to trap(1). When the h3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even h3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.87.1.4.0.1 |
h3cMACInformationTrapObjectsExt OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.87.1.4.2 |
h3cMACInfoTrapVerExtThe version of trap information.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.1 |
h3cMACInfoTrapIndexExtThe sequence number of trap information. When it reaches the maximum value, it should be set to 1.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.2 |
h3cMACInfoTrapCountExtThe cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.3 |
h3cMACInfoTrapMsgExtThis object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 14 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - WAPI <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 4 octets.ro OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.4 |
More MIBs from 3Com
Browse all 3ComMIBs →A3Com-products-MIB
Standard SNMP MIB module defining data structures for A3Com-products-MIB.
1546 objects→
A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
1462 objects→
A3COM-HUAWEI-CBQOS2-MIB
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
472 objects→
A3COM-HUAWEI-DOT11-APMT-MIB
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
472 objects→
A3COM-SWITCHING-SYSTEMS-MIB
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
425 objects→
A3COM-HUAWEI-EPON-MIB
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.
424 objects→