A3COM-HUAWEI-LswTRAP-MIB
Standard SNMP MIB module defining data structures for A3COM-HUAWEI-LswTRAP-MIB.
Imported Objects
Objects
26 total| Object Name |
|---|
hwsLswTrapMib MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.2.23.1.12 |
hwsLswTRAPMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.23.1.12.1 |
powerfailurePower supply failure NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.1 |
hwPowerNormalPower supply normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.2 |
hwMasterPowerNormalMaster power supply normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.3 |
hwSlavePowerNormalSlave power supply normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.4 |
hwPowerRemovedPower removed NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.5 |
fanfailureFan failure NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.6 |
hwFanNormalFan normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.7 |
hwBoardRemovedBoard removed NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.8 |
hwBoardInsertedBoard inserted NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.9 |
hwBoardFailureBoard failed NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.10 |
hwBoardNormalBoard normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.11 |
hwSubcardRemoveSub card removeed NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.12 |
hwSubcardInsertSub card inserted NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.13 |
hwBoaardTemperatureLowerBoard temperature low NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.14 |
hwBoaardTemperatureFromLowerToNormalBoard temperature form lower to normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.15 |
hwBoaardTemperatureHigherBoard temperature high NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.16 |
hwBoaardTemperatureFormHigherToNormalBoard temperature from higher to normal NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.17 |
hwRequestLoadingBoard request load NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.18 |
hwLoadFailureBoard load failure NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.19 |
hwLoadFinishedBoard load finished NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.20 |
hwBackBoardModeSetFuilureBack board mode set failure NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.21 |
hwBackBoardModeSetOKBack board mode set OK NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.22 |
hwPowerInsertedPower inserted NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.23 |
hwBootImageUpdatedThis trap node indicates that the boot image of specified board is updated. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.12.1.24 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.