A3COM-HUAWEI-LswMix-MIB
Standard SNMP MIB module defining data structures for A3COM-HUAWEI-LswMix-MIB.
Imported Objects
Objects
11 total| Object Name |
|---|
hwLswMix MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.2.23.1.17 |
hwLswLastSwitchDateThis object indicates the date of the most recent change to the mpu(Main Processing Unit).ro INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.17.1 |
hwLswLastSwitchTimeThis object indicates the time of the most recent change to the mpu.ro INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.17.2 |
hwLswMpuSwitchsNumThis object indicates the total times of the mpu switched since the system start up.ro INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.17.3 |
hwLswMpuSwitchSetting this object will immediately switch the standby mpu to master mpu. Read is not supported.rw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.17.4 |
hwLswXSlotTableThe source main table. SEQUENCE OF HwLswXSlotEntry .1.3.6.1.4.1.43.45.1.2.23.1.17.5 |
hwLswXSlotEntryAn entry in the source main table. HwLswXSlotEntry .1.3.6.1.4.1.43.45.1.2.23.1.17.5.1 |
hwLswMainCardBoardStatusThe value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit)ro Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.17.5.1.1 |
hwLswCrossBarStatusThe value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.ro Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.17.5.1.2 |
hwsMixTrapMib OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.23.1.17.10 |
hwSlaveSwitchOverAn hwSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.17.10.1 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.