A3COM-HUAWEI-L2ISOLATE-MIB
The A3COM-HUAWEI-L2ISOLATE-MIB manages Layer 2 port isolation configurations on Huawei and 3Com network switches, specifically monitoring isolation group membership and enabling or disabling traffic segregation between ports within the same VLAN.
Imported Objects
Objects
10 total| Object Name |
|---|
h3cL2IsolateThe MIB module is used for l2 isolation. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.103 |
h3cL2IsolateObject OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.103.1 |
h3cL2IsolateEnableTableA table for enabling/disabling layer-2-isolate for VLAN. SEQUENCE OF H3cL2IsolateEnableEntry .1.3.6.1.4.1.43.45.1.10.2.103.1.1 |
h3cL2IsolateEnableEntryAn entry for enabling/disabling layer-2-isolate for VLAN. H3cL2IsolateEnableEntry .1.3.6.1.4.1.43.45.1.10.2.103.1.1.1 |
h3cL2IsolateVLANIndexRepresents index of VLAN for layer-2-isolate. Integer32 .1.3.6.1.4.1.43.45.1.10.2.103.1.1.1.1 |
h3cL2IsolateEnableRepresents the layer-2-isolate status of VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.103.1.1.1.2 |
h3cL2IsolatePermitMACTableA table represents the permitting MAC address for the specific VLAN. SEQUENCE OF H3cL2IsolatePermitMACEntry .1.3.6.1.4.1.43.45.1.10.2.103.1.2 |
h3cL2IsolatePermitMACEntryEach entry represents the permitting MAC address for the specific VLAN. H3cL2IsolatePermitMACEntry .1.3.6.1.4.1.43.45.1.10.2.103.1.2.1 |
h3cL2IsoLatePermitMACRepresents the MAC address permitted in the VLAN. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.103.1.2.1.1 |
h3cL2IsoLatePermitMACRowStatusRowStatus. Three actions are used: active, CreateAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.103.1.2.1.2 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.