A3COM-HUAWEI-ISDN-MIB
AI MIB Summary
The A3COM-HUAWEI-ISDN-MIB enables monitoring and management of Integrated Services Digital Network (ISDN) interfaces and call states on Huawei and 3Com networking equipment. It provides access to ISDN-specific counters, including active B-channel sessions, call setup failures, and D-channel signaling status for troubleshooting legacy telephony connectivity.
This file describes the huawei mib implementation of ISDN
Main OID:
hwIsdnMib.1.3.6.1.4.1.43.45.1.2.33.9
49
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
hwIsdnMibThis file describes the huawei mib implementation of ISDN MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.2.33.9 |
hwIsdnMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.1 |
isdnChannelB OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.1.1 |
hwChanbIsdnTableThis table is used to describe the router's B Channels infomation SEQUENCE OF HWChanbIsdnEntry .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1 |
hwChanbIsdnEntryA single B channels HWChanbIsdnEntry .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1 |
hwChanbIsdnIfthis object is used to describe the virtual interface value associated with one neighbor.ro INTEGER .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.1 |
hwChanbIsdnPermitthis object is used to describe the call permissions.ro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.2 |
hwChanbIsdnAddrthis object is used to descirbe the call address by which we call one nieghbor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.3 |
hwChanbIsdnCallerAddrthis object is used to describe the callser address which will be known by B channels.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.4 |
hwChanbIsdnCallTypethis object is used to describe that whether it is an incoming call or an outging call.ro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.5 |
hwChanbIsdnInfoTypethis object is used to describe the information type on the callro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.6 |
hwChanbIsdnStatethis object is used to manage the call by NMSro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.7 |
hwChanbIsdnCallFreeReasonthis object is used to describe the reason why last call is cleardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.8 |
hwChanbIsdnCallFreeCodethis object is used to describe the reason code for the last call down.ro INTEGER .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.9 |
hwChanbIsdnCallAcceptthis object is used to describe the accepted call number from the B channelsro Counter32 .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.10 |
hwChanbIsdnCallRejectthis object is used to describe the refused call number from B channels .ro Counter32 .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.11 |
hwChanbIsdnCallSuccessthis object is used to describe the successful call number to B channels after system restart.ro Counter32 .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.12 |
hwChanbIsdnCallFailurethis object is used to describe the failing call number to B channels after system restartro Counter32 .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.13 |
hwChanbIsdnMaxKeepTimeThis object is used to descirbe the maximum duration time in milliseconds.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.14 |
hwChanbIsdnLastKeepTimethis object is used to describe the last call duration time in millisecondsro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.15 |
hwChanbIsdnLastCallTimethis object is used to describe the sysUpTime after last call attempt was made.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.1.1.1.16 |
hwChanbTrapEnableThis object is used to control sending traprw Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.1.2 |
isdnQ931 OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.1.2 |
hwQ931IsdnControl OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.1.2.1 |
hwQ931CallSetupTrapEnableThis object is used to control sending callsetup trap.rw Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.2.1.1 |
hwQ931CallClearTrapEnableThis object is used to control sending callclear traprw Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.2.1.2 |
hwQ931IsdnTableThis table describes B channel information for the use of Q931 SEQUENCE OF HwQ931IsdnEntry .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2 |
hwQ931IsdnEntryA B channel entry in the Q931. HwQ931IsdnEntry .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1 |
hwQ931IsdnOpIndexIndex of the B ISDN channel interface managed by Q93ro Integer32 .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.1 |
hwQ931IsdnLastCalledThis object describes the called ISDN number. When an outgoing call is established successfully, the value of this node is the call number of this device, otherwise the value is null stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.2 |
hwQ931IsdnLastCallingThis object describes the calling ISDN number. When an incoming call is established successfully, the value of this node is the call number of peer device, otherwise the value is null string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.3 |
hwQ931IsdnLastCauseDiscThis object describes last cause of disconnection. In hwQ931IsdnCallClear trap, the value of this node is the reason of disconnection, this node is only valid for hwQ931IsdnCallClear trap, the value of this node is unknown in other situation. unknown: unknown error. normCallClr: normal call clearing. noRouteToTransNet: no route to specified transit network. noRouteToDest: no route to destination. switchEquCongest: switching equipment congestion. netOutofOrder: network out of order.ro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.4 |
hwQ931IsdnCallDirectionThis object describes the direction of the current call.ro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.5 |
hwQ931IsdnCallTimeOpenThis object describes the start time of this call. start time is the time of an existent call that has just been established.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.6 |
hwQ931IsdnCallTimeCloseThis object describes the close time of this call. This node is only vaild for hwQ931IsdnCallClear trap. In other situation the value of this node is zero. In hwQ931IsdnCallClear trap, this node provides the time of an existent call that the call has just been cleared.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.33.9.1.2.2.1.7 |
hwIsdnLapd OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.1.3 |
hwLapdIsdnTableThis table is used to describe the config of ISDN D channel. SEQUENCE OF HwLapdIsdnEntry .1.3.6.1.4.1.43.45.1.2.33.9.1.3.1 |
hwLapdIsdnEntryISDN D channel config HwLapdIsdnEntry .1.3.6.1.4.1.43.45.1.2.33.9.1.3.1.1 |
hwLapdIsdnIfThis object is used to describe the D channel interface value associated with one neighbor.ro Integer32 .1.3.6.1.4.1.43.45.1.2.33.9.1.3.1.1.1 |
hwLapdIsdnProtocolThis object is used to describe the protocol D channel applied. For E1, the protocol may be dss1, qsig, etsi. For T1, the protocol may be ess5, ansi, att, dss1, etsi, ni2, ntt, qsig. For BRI, the protocol may be ansi, dss1, etsi, ni, ntt.rw Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.3.1.1.2 |
hwLapdIsdnIfModeThe physical interface mode. For TE mode, the value of this object is userSide. For NT mode, the value of this object is networkSide.rw Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.3.1.1.3 |
hwLapdIsdnLinkStatusThe operational status of this interface: inactive all layers are inactive. l1Active layer 1 is activated, layer 2 datalink not established. l2Active layer 1 is activated, layer 2 datalink established.ro Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.3.1.1.4 |
hwLapdIsdnControl OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.1.3.2 |
hwLapdStatusTrapEnableThis object is used to control sending hwLapdIsdnStatusChange trap.rw Enumeration .1.3.6.1.4.1.43.45.1.2.33.9.1.3.2.1 |
hwIsdnMibTraps OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.33.9.2 |
hwChanbIsdnCallWhen one call is setup ,cleard or determined , the trap is sent to NMS NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.33.9.2.1 |
hwQ931IsdnCallSetupThis trap/inform is sent to the manager whenever a call is established successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.33.9.2.2 |
hwQ931IsdnCallClearThis trap/inform is sent to the manager under the following conditions: - an existent call is normally cleared. - an existent call is determined to have ultimately failed, and has been cleared. - the existent call is cleared when the BRI/PRI port is down. - the existent call is cleared when the dialer rule is down. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.33.9.2.3 |
hwLapdIsdnStatusChangeThis trap/inform is sent to the manager whenever the D-channel of an interface changes state. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.33.9.2.4 |
More MIBs from 3Com
Browse all 3ComMIBs →A3Com-products-MIB
Standard SNMP MIB module defining data structures for A3Com-products-MIB.
1546 objects→
A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
1462 objects→
A3COM-HUAWEI-CBQOS2-MIB
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
472 objects→
A3COM-HUAWEI-DOT11-APMT-MIB
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
472 objects→
A3COM-SWITCHING-SYSTEMS-MIB
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
425 objects→
A3COM-HUAWEI-EPON-MIB
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.
424 objects→