A3COM-HUAWEI-IP-ADDRESS-MIB
The A3COM-HUAWEI-IP-ADDRESS-MIB enables monitoring and management of IPv4 address configurations, including interface bindings and status states, on Huawei and 3Com network devices via SNMP. This module provides visibility into IP address allocation, interface association, and operational state changes for IPv4 network interfaces.
Imported Objects
Objects
34 total| Object Name |
|---|
h3cIpAddrMIBThe MIB module for managing IPv4 address. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.67 |
h3cIpAddressObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.67.1 |
h3cIpAddressConfig OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.67.1.1 |
h3cIpAddrSetTableThe table of address information is relevant to this entity's IPv4 addresses for setting. The address information that can be read and set in this table is a subset of the address information that can be read in h3cIpAddrReadTable and ipAddrTable in IP-MIB. This table is used to configure IPv4 addresses of an interface identified by h3cIpAddrSetIfIndex. When users create or delete an entry in this table, the agent also increases or reduces a corresponding entry in the h3cIpAddrReadTable and ipAddrTable in IP-MIB. When an interface which has been assigned IPv6 address is deleted, the agent also deletes the entry corresponding to the interface in this table and h3cIpAddrReadTable. All IPv4 addresses in this table will also show in ipAddrTable in IP-MIB. SEQUENCE OF H3cIpAddrSetEntry .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1 |
h3cIpAddrSetEntryDefine the IPv4 address information. H3cIpAddrSetEntry .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1 |
h3cIpAddrSetIfIndexThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex. Integer32 .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.1 |
h3cIpAddrSetAddrTypeThe IP address type to which this entry's address information pertains. The value must be ipv4. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.2 |
h3cIpAddrSetAddrThe IPv4 address to which this entry's address information pertains. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.3 |
h3cIpAddrSetMaskThe subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.4 |
h3cIpAddrSetSourceTypeIndicate the type of source of the IPv4 address.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.5 |
h3cIpAddrSetCatalogIndicate the category of the IPv4 address.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.6 |
h3cIpAddrSetRowStatusThis object is used to create a new row or delete an existing row in this table, only support active, createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.67.1.1.1.1.7 |
h3cIpAddrReadTableThe table of address information is relevant to this entity's IP addresses for reading. This is the extension of the ipAddrTable in IP-MIB. All IPv4 addresses in this table will also show in ipAddrTable in IP-MIB. SEQUENCE OF H3cIpAddrReadEntry .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2 |
h3cIpAddrReadEntryDefine the IPv4 address information. H3cIpAddrReadEntry .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1 |
h3cIpAddrReadIfIndexThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex. Integer32 .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1.1 |
h3cIpAddrReadAddrTypeThe IP address type to which this entry's address information pertains. The value must be ipv4. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1.2 |
h3cIpAddrReadAddrThe IPv4 address to which this entry's address information pertains. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1.3 |
h3cIpAddrReadMaskThe subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.ro IpAddress .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1.4 |
h3cIpAddrReadSourceTypeIndicate the type of source of the IPv4 address.ro Enumeration .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1.5 |
h3cIpAddrReadCatalogIndicate the category of the IPv4 address.ro Enumeration .1.3.6.1.4.1.43.45.1.10.2.67.1.1.2.1.6 |
h3cIpv4AddrTableThis table is used to configure primary IPv4 address of an interface identified by ifIndex. SEQUENCE OF H3cIpv4AddrEntry .1.3.6.1.4.1.43.45.1.10.2.67.1.1.3 |
h3cIpv4AddrEntryDefine the IPv4 address information. H3cIpv4AddrEntry .1.3.6.1.4.1.43.45.1.10.2.67.1.1.3.1 |
h3cIpv4AddrAddrThe IPv4 address to which this entry's address information pertains.rw IpAddress .1.3.6.1.4.1.43.45.1.10.2.67.1.1.3.1.1 |
h3cIpv4AddrMaskThe subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.43.45.1.10.2.67.1.1.3.1.2 |
h3cIpv4AddrRowStatusThis object is used to create a new row or delete an existing row in this table, only support active, notInService, createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.67.1.1.3.1.3 |
h3cIpAddrNotify OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.67.2 |
h3cIpAddrNotifyScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.67.2.1 |
h3cIpAddrNotifyIfIndexThe IP address IfIndex of specified interface on the device.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.67.2.1.1 |
h3cIpAddrOldIpAddressThe Old IP address of specified interface on the device.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.67.2.1.2 |
h3cIpAddrNewIpAddressThe New IP address of specified interface on the device.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.67.2.1.3 |
h3cIpAddrFirstTrapTimeRepresents the first trap time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.43.45.1.10.2.67.2.1.4 |
h3cIpAddrNotifyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.67.2.2 |
h3cIpAddrNotifyObjectsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.67.2.2.0 |
h3cIpAddressChangeNotifyThis notification will be generated when the IP address of interface is changed. The change maybe originate from NMS, DHCP server or administrator. This notification announces useful IP address change. So it is triggered by significative IP address change. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.67.2.2.0.1 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.