A3COM-HUAWEI-HGMP-MIB
AI MIB Summary
The A3COM-HUAWEI-HGMP-MIB module facilitates the monitoring and management of Huawei HGMP (Hybrid Gateway Management Protocol) sessions and operational states on A3COM LANswitch devices. It provides specific objects to track HGMP peer discovery, link status, and protocol-specific counters essential for maintaining Layer 2 switching fabric integrity.
This MIB contains objects to manage the hgmp operations, which are used on lanswitch products.
Main OID:
hwCluster.1.3.6.1.4.1.43.45.1.6.7
146
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
146 total| Object Name |
|---|
hwClusterThis MIB contains objects to manage the hgmp operations, which are used on lanswitch products. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.6.7 |
hwClusterObjectThis MIB contains objects to manage the cluster operations, which are used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.1 |
hgmpEventsV2Definition point for cluster notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.1.0 |
hgmpMemberfailureWhen a cluster member failure, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.1.0.1 |
hgmpMemberRecoverWhen a cluster member recover, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.1.0.2 |
hgmpMemberStatusChangeWhen a cluster member status change, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.1.0.3 |
hgmpNetTopChangeWhen net topology of this cluster change, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.1.0.4 |
hgmpSetVLANSecurityConfigure whether to perform the VLAN check inside the cluster.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.1.1 |
hgmpHandShakeIntervalHandshaking interval of the cluster member switches.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.2 |
hgmpHandShakeHoldtimeHoldtime of administrator switch and member switch in the cluster.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.3 |
hgmpGrpMemberTableChangeAdd 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.4 |
hgmpMemberDisconRateDisconnection times of the member and administrator switches divided by member number times 1000.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.5 |
hgmpCmdLanswitchFlagAdministrator switch flagrw Enumeration .1.3.6.1.4.1.43.45.1.6.7.1.6 |
hgmpCmdClusterNameCluster name of the administrator switchrw OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.7 |
hgmpMngPriIpSegCMIPThe private management IP address of the administrator switch, which can not be modified after the cluster has been created.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.8 |
hgmpMngPriIpMaskThe private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.9 |
hgmpFtpServerThe cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.10 |
hgmpTftpServerThe cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.11 |
hgmpSnmpHostThe Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.12 |
hgmpLogHostLog host of the cluster, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.13 |
hgmpGrpMemberTableTable of cluster member switches SEQUENCE OF HgmpGrpMemberEntry .1.3.6.1.4.1.43.45.1.6.7.1.14 |
hgmpGrpMemberEntry HgmpGrpMemberEntry .1.3.6.1.4.1.43.45.1.6.7.1.14.1 |
hgmpGrpMemberDeviceId4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.14.1.1 |
hgmpGrpMemberSerialWhen adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.14.1.2 |
hgmpGrpMemberIpAddrThe private IP addresses of the member switches for the communication inside the cluster.ro IpAddress .1.3.6.1.4.1.43.45.1.6.7.1.14.1.3 |
hgmpGrpMemberNameHostname of the member switchro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.14.1.4 |
hgmpGrpMemberPasswordMember password for joining a clusterrw OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.14.1.5 |
hgmpGrpMemberPlatformSet the hardware platform. A null string indicates the information does not exist in the device adjacency table.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.14.1.6 |
hgmpGrpMemberStatusMember status on the administrator switch, use for displaying the network management status.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.1.14.1.7 |
hgmpGrpMemberDisconCountCount of inside communication disconnection between the member switch and the administrator switch.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.14.1.8 |
hgmpGrpMemberEnrollTimeEnrollment time of the member, measured in seconds.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.14.1.9 |
hgmpGrpMemberOperateOperation indication field, indicates the operation of adding/removing a member by the network management agent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.6.7.1.14.1.10 |
hgmpMemberResetTableReset a member switch in the cluster. SEQUENCE OF HgmpMemberResetEntry .1.3.6.1.4.1.43.45.1.6.7.1.15 |
hgmpMemberResetEntry HgmpMemberResetEntry .1.3.6.1.4.1.43.45.1.6.7.1.15.1 |
hgmpMemberResetMACThe management MAC address of the switch to be reset, which is the unique identifier of the switch.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.15.1.1 |
hgmpMemberEraseflashWhether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.1.15.1.2 |
hgmpClusterRoleThis switch's role in cluster.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.1.16 |
hgmpClusterMaxPoolNumMax switch members that the cluster can support(include administrator switch).ro INTEGER .1.3.6.1.4.1.43.45.1.6.7.1.17 |
hgmpClusterCmdSwMacThe MAC address of administrator switch. It will be filled with zero when not be a member of cluster.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.18 |
hgmpRunEnable cluster on this switch.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.1.19 |
hgmpProtocolMac OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.1.22 |
hgmpClusterProtocolMacProtocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.6.7.1.22.1 |
hgmpTopologyManagement OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.1.23 |
hgmpWhitelistTableCluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure. SEQUENCE OF HgmpWhitelistEntry .1.3.6.1.4.1.43.45.1.6.7.1.23.1 |
hgmpWhitelistEntryEntry items HgmpWhitelistEntry .1.3.6.1.4.1.43.45.1.6.7.1.23.1.1 |
hgmpWhitelistDeviceIdUnique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.1 |
hgmpWhitelistSerialWhen adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.ro Integer32(0..2047 | 65535) .1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.2 |
hgmpWhitelistRowStatusThe row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.3 |
hgmpWhitelistNbTableCluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology. SEQUENCE OF HgmpWhitelistNbEntry .1.3.6.1.4.1.43.45.1.6.7.1.23.2 |
hgmpWhitelistNbEntryEntry items HgmpWhitelistNbEntry .1.3.6.1.4.1.43.45.1.6.7.1.23.2.1 |
hgmpWhitelistNbIndexIndex of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'. Integer32 .1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.1 |
hgmpWhitelistNbDeviceIdUnique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.2 |
hgmpWhitelistPortNameThe name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.3 |
hgmpWhitelistNbPortNameThe name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.4 |
hgmpBlacklistTableCluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster. SEQUENCE OF HgmpBlacklistEntry .1.3.6.1.4.1.43.45.1.6.7.1.23.3 |
hgmpBlacklistEntryEntry items HgmpBlacklistEntry .1.3.6.1.4.1.43.45.1.6.7.1.23.3.1 |
hgmpBlacklistDeviceIdUnique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.1 |
hgmpBlacklistAccessDeviceIdUnique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.2 |
hgmpBlacklistAccessPortNameThe port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.3 |
hgmpBlacklistRowStatusThe row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.4 |
hgmpMemberPriPortTableThis table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address. SEQUENCE OF HgmpMemberPriPortEntry .1.3.6.1.4.1.43.45.1.6.7.1.24 |
hgmpMemberPriPortEntryInformation about a specified member private port entry. The indexes of the entry are hgmpGrpMemberDevId and hgmpMemberPriPortProto, which indicate entries in the table. HgmpMemberPriPortEntry .1.3.6.1.4.1.43.45.1.6.7.1.24.1 |
hgmpMemberDevIdUnique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.1.24.1.1 |
hgmpMemberPriPortProtoThe index of this table. Each instance value of this object corresponds to a different protocol. Unsigned32 .1.3.6.1.4.1.43.45.1.6.7.1.24.1.2 |
hgmpMemberPriPortProtoDescrIt describes the hgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hgmpMemberPriPortProtocol value is 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.6.7.1.24.1.3 |
hgmpMemberPriPortNumThe private port number of member switch, used by specified hgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hgmpGrpMemberIpAddr.ro Unsigned32 .1.3.6.1.4.1.43.45.1.6.7.1.24.1.4 |
hwStackObjectThis MIB contains objects to manage the stack operations, which is used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.2 |
hgmpStackEventsV2Definition point for Stack notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.2.0 |
hgmpStackMemberfailureWhen a stack member failure, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.2.0.1 |
hgmpStackMemberRecoverWhen a stack member Recover, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.2.0.2 |
hgmpStackMemberStatusChangeWhen a stack member status change, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.6.7.2.0.3 |
hgmpStackMemberTableChangeChange identifier of the stack member table.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.2.1 |
hgmpStackMemberDisconRateDisconnection rate of the stack member switches.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.2.2 |
hgmpMainLanswitchFlagThe status of the local switch in the stack.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.2.3 |
hgmpStackIpPoolStartIPThe first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.2.4 |
hgmpStackIpPoolLengthThe length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.rw INTEGER .1.3.6.1.4.1.43.45.1.6.7.2.5 |
hgmpStackMemberTableStack member table. SEQUENCE OF HgmpStackMemberEntry .1.3.6.1.4.1.43.45.1.6.7.2.6 |
hgmpStackMemberEntry HgmpStackMemberEntry .1.3.6.1.4.1.43.45.1.6.7.2.6.1 |
hgmpStackMemberDeviceId2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.2.6.1.1 |
hgmpStackMemberSerialWhen adding a member switch to the stack, the master switch will assign an unique integer to identify it.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.2.6.1.2 |
hgmpStackMemberIpAddrThe private member IP address for the communication inside the stack.ro IpAddress .1.3.6.1.4.1.43.45.1.6.7.2.6.1.3 |
hgmpStackMemberNameHostname of the member switch.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.2.6.1.4 |
hgmpStackMemberPasswordMember password for joining a stack.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.2.6.1.5 |
hgmpStackMemberPlatformSet the hardware platform. A null string indicates the information does not exist in the device adjacency table.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.2.6.1.6 |
hgmpStackMemberStatusMember status on the master switch, use for displaying the network management status.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.2.6.1.7 |
hgmpStackMemberDisconCountCount of inside communication disconnection between the member switch and the master switch.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.2.6.1.8 |
hgmpStackMemberEnrollTimeEnrollment time of the member, measured in seconds.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.2.6.1.9 |
hgmpStackRoleThis switch's role status in stack.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.2.7 |
hgmpStackMaxPoolNumMax switch members in one stack that the switch support (include main switch).ro INTEGER .1.3.6.1.4.1.43.45.1.6.7.2.8 |
hgmpStackMainSwMacThe MAC address of main switch. It will be 00.00.00 when not be a member of stack.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.2.9 |
hgmpStackIpPoolMaskThe mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.rw IpAddress .1.3.6.1.4.1.43.45.1.6.7.2.10 |
hwNTDPObjectThis MIB contains objects to manage the ntdp operations, which are used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.4 |
hgmpNTDPCollectTopTimeTopology collection interval of the administrator switch of the cluster, measured in minutes.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.1 |
hgmpNTDPHopRangeRange of the topology collection of the administrator switchrw Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.2 |
hgmpNTDPRunEnable/Disable the NTDP function on the switch.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.4.3 |
hgmpNTDPPortDelaySet the delay to forward the topology request via the ports, measured in milliseconds.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.4 |
hgmpNTDPHopDelaySet the delay to forward the topology request from every hop, measured in milliseconds.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.5 |
hgmpNTDPLastTopCollectDurationDuration of the latest overall topology collection, a performance count measured in seconds.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.6 |
hgmpNTDPCacheChangeAdd 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.7 |
hgmpNTDPTOPTableChangeAdd 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.8 |
hgmpNTDPInterfaceTableEnable/Disable the NTDP on the switch port. SEQUENCE OF HgmpNTDPInterfaceEntry .1.3.6.1.4.1.43.45.1.6.7.4.9 |
hgmpNTDPInterfaceEntry HgmpNTDPInterfaceEntry .1.3.6.1.4.1.43.45.1.6.7.4.9.1 |
hgmpNTDPInterfaceIfIndexUnique identifier an interface of the device.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.9.1.1 |
hgmpNTDPInterfaceEnableIf it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.4.9.1.2 |
hgmpNTDPCacheTableAccess the information about the switch from the topology table. SEQUENCE OF HgmpNTDPCacheEntry .1.3.6.1.4.1.43.45.1.6.7.4.10 |
hgmpNTDPCacheEntry HgmpNTDPCacheEntry .1.3.6.1.4.1.43.45.1.6.7.4.10.1 |
hgmpNTDPCacheHashIndexOur NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.10.1.1 |
hgmpNTDPCacheDeviceID2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.10.1.2 |
hgmpNTDPCacheClusterNameName of the cluster including the device.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.10.1.3 |
hgmpNTDPCacheClusterRoleCluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.4.10.1.4 |
hgmpNTDPCacheCapabilitiesThe capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.ro INTEGER .1.3.6.1.4.1.43.45.1.6.7.4.10.1.5 |
hgmpNTDPCacheVersionThe version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.10.1.6 |
hgmpNTDPCachePlatformHardware platform. A null string indicates that the field was not included in the latest NTDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.10.1.7 |
hgmpNTDPCacheMngVLANThe management VLAN ID of the device.ro INTEGER .1.3.6.1.4.1.43.45.1.6.7.4.10.1.8 |
hgmpNTDPCacheHopHops to this switch.ro INTEGER .1.3.6.1.4.1.43.45.1.6.7.4.10.1.9 |
hgmpNTDPTopTableAccess the topology structure collected by the NTDP. SEQUENCE OF HgmpNTDPTopEntry .1.3.6.1.4.1.43.45.1.6.7.4.11 |
hgmpNTDPTopEntry HgmpNTDPTopEntry .1.3.6.1.4.1.43.45.1.6.7.4.11.1 |
hgmpNTDPTopHashIndexOur NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.11.1.1 |
hgmpNTDPTopEdgeStartDevID2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.11.1.2 |
hgmpNTDPTopEdgeIndexEdge index of this entry in the data structure.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.11.1.3 |
hgmpNTDPTopEdgeEndDevID2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.11.1.4 |
hgmpNTDPTopEdgeStartPortThe number of the first port of a topology edge. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.11.1.5 |
hgmpNTDPTopEdgeStartPortFullDuplexThe full-duplex status of the first port on a topology edge.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.4.11.1.6 |
hgmpNTDPTopEdgeStartPortSpeedThe speed of the first port on a topology edge.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.4.11.1.7 |
hgmpNTDPTopEdgeEndPortThe number of the last port of a topology edge. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.4.11.1.8 |
hgmpNTDPTopLinkStatusIn STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.4.11.1.11 |
hwNDPObjectThis MIB contains objects to manage the ndp operations, which are used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.6.7.5 |
hwNDPStatusNDP protocol module enable flagrw Enumeration .1.3.6.1.4.1.43.45.1.6.7.5.1 |
hwNDPHelloTimerNDP packet transmission interval, measured in seconds.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.5.2 |
hwNDPAgingTimeHow long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.rw Integer32 .1.3.6.1.4.1.43.45.1.6.7.5.3 |
hwNDPChangeChange identifier of the Neighbor tablero Counter32 .1.3.6.1.4.1.43.45.1.6.7.5.4 |
hwNDPPortTableConfigure to enable/disable the interface NDP of the switch. SEQUENCE OF HwNDPPortEntry .1.3.6.1.4.1.43.45.1.6.7.5.5 |
hwNDPPortEntry HwNDPPortEntry .1.3.6.1.4.1.43.45.1.6.7.5.5.1 |
hwNDPIfIndexUnique identifier of an interface of the device.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.5.5.1.1 |
hwNDPPortStatusIf it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.rw Enumeration .1.3.6.1.4.1.43.45.1.6.7.5.5.1.2 |
hwNDPPortNbTableNDP neighbor information on the switch. SEQUENCE OF HwNDPPortNbEntry .1.3.6.1.4.1.43.45.1.6.7.5.6 |
hwNDPPortNbEntry HwNDPPortNbEntry .1.3.6.1.4.1.43.45.1.6.7.5.6.1 |
hwNDPPortNbDeviceId2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.1 |
hwNDPPortNbPortNameUnique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.2 |
hwNDPPortNbDeviceNameDevice name. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.3 |
hwNDPPortNbPortModeThe neighbor port duplex mode.ro Enumeration .1.3.6.1.4.1.43.45.1.6.7.5.6.1.4 |
hwNDPPortNbProductVerProduct version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.5 |
hwNDPPortNbHardVerHardware version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.6 |
hwNDPPortNbBootromVerBootrom version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.7 |
hwNDPPortNbSoftVerSoftware version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.43.45.1.6.7.5.6.1.8 |
hwNDPPortNbAgingtimeHow long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.ro Integer32 .1.3.6.1.4.1.43.45.1.6.7.5.6.1.9 |
More MIBs from 3Com
Browse all 3ComMIBs →A3Com-products-MIB
Standard SNMP MIB module defining data structures for A3Com-products-MIB.
1546 objects→
A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
1462 objects→
A3COM-HUAWEI-CBQOS2-MIB
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
472 objects→
A3COM-HUAWEI-DOT11-APMT-MIB
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
472 objects→
A3COM-SWITCHING-SYSTEMS-MIB
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
425 objects→
A3COM-HUAWEI-EPON-MIB
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.
424 objects→