A3COM-HUAWEI-DSP-MIB
The A3COM-HUAWEI-DSP-MIB module enables monitoring of Digital Signal Processing (DSP) operational status and resource utilization on Huawei and 3Com network devices, specifically tracking metrics such as active voice channels, DSP resource allocation states, and processing errors. This MIB facilitates the detection of DSP saturation or failures that directly impact voice call capacity and quality on VoIP gateways and routers.
Imported Objects
Objects
22 total| Object Name |
|---|
h3cDSPThis MIB is to provide the definition of the DSP(Digital Signal Processing) status. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.89 |
h3cVPMStatusTableThe table contains status parameters of VPM(Voice Process Module) card. SEQUENCE OF H3cVPMStatusEntry .1.3.6.1.4.1.43.45.1.10.2.89.1 |
h3cVPMStatusEntryThe entry of VPM status table. H3cVPMStatusEntry .1.3.6.1.4.1.43.45.1.10.2.89.1.1 |
h3cVPMIndexThe index for this entry. The sequence of VPM card in the chassis is from the top to bottom.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.1.1.1 |
h3cVPMEnPhysicalIndexThe object corresponds to PhysicalIndex in the chassis.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.43.45.1.10.2.89.1.1.2 |
h3cVPMStateThe object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.ro Enumeration .1.3.6.1.4.1.43.45.1.10.2.89.1.1.3 |
h3cVPMResourceUtilizationThe object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.1.1.4 |
h3cVPMHiWaterUtilizationThe object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.1.1.5 |
h3cVPMMaxChannelThe maximum number of channels can be supported in each VPM card.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.1.1.6 |
h3cDSPStatusTableThe table contains status parameters of DSP(Digital Signal Processing) card. SEQUENCE OF H3cDSPStatusEntry .1.3.6.1.4.1.43.45.1.10.2.89.2 |
h3cDSPStatusEntryThe entry of DSP status table. H3cDSPStatusEntry .1.3.6.1.4.1.43.45.1.10.2.89.2.1 |
h3cDSPIndexThe index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.2.1.1 |
h3cDSPVPMIndexThe object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.2.1.2 |
h3cDSPEnPhysicalIndexThe object corresponds to PhysicalIndex in the chassis.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.43.45.1.10.2.89.2.1.3 |
h3cDSPResetTimeThe value of sysUpTime from the last DSP reset occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.43.45.1.10.2.89.2.1.4 |
h3cDSPMaxChannelThe maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.2.1.5 |
h3cDSPStateThe object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.ro Enumeration .1.3.6.1.4.1.43.45.1.10.2.89.2.1.6 |
h3cDSPInUseChannelThe number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.89.2.1.7 |
h3cDSPTrap OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.89.3 |
h3cDSPTrapPrex OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.89.3.0 |
h3cVPMStateChangeThis trap is sent when VPM state changes. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.89.3.0.1 |
h3cDSPStateChangeThis trap is sent when DSP state changes. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.2.89.3.0.2 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.