A3COM-HUAWEI-DOT11-REF-MIB
The A3COM-HUAWEI-DOT11-REF-MIB module provides the foundational root node and type definitions for monitoring IEEE 802.11 wireless LAN parameters, including physical layer modes (a/b/g), security configurations (802.11i, AKM), and radio interoperability settings on A3COM and Huawei network devices.
Imported Objects
Objects
14 total| Object Name |
|---|
h3cDot11This MIB defines the root node and TC for 802.11 features. By this way, the MIB series for 802.11 will be easily maintained. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11a This is a high speed physical layer extension to the 802.11 standard on the 5 GHz band. IEEE 802.11b High-rate wireless LAN standard for wireless data transfer at up to 11 Mbps. IEEE 802.11g Higher Speed Physical Layer (PHY) Extension to IEEE 802.11b, will boost wireless LAN speed to 54 Mbps by using OFDM (orthogonal frequency division multiplexing). The IEEE 802.11g specification is backward compatible with the widely deployed IEEE 802.11b standard. When configure radio with as bg mode, it means that radio will be compatible to 802.11b and 802.11g. When configure radio with as g mode, it means that radio will be only compatible to 802.11g. IEEE 802.11i As 802.11 has lot of deficiency in wireless security domain, especially for enterprise custom, IEEE defined a new standard 802.11i to extend security feature of 802.11 standard. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.75 |
h3cDot11Common OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.75.12 |
h3cDot11ElementGroup OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.75.12.1 |
h3cDot11APElementTableThis table is used to represent fat AP and AP template on AC as one kind of AP element. SEQUENCE OF H3cDot11APElementEntry .1.3.6.1.4.1.43.45.1.10.2.75.12.1.1 |
h3cDot11APElementEntryEach entry contains information for each AP element. H3cDot11APElementEntry .1.3.6.1.4.1.43.45.1.10.2.75.12.1.1.1 |
h3cDot11APElementIndexThis object represents the index of AP element. Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.12.1.1.1.1 |
h3cDot11APElementTemplateNameThis object represents the template name of AP element.ro OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.75.12.1.1.1.2 |
h3cDot11APElementSerialIDThis object represents the serial ID of AP element.ro OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.75.12.1.1.1.3 |
h3cDot11APElementModelAliasThis object represents the alias of AP element model name.ro OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.75.12.1.1.1.4 |
h3cDot11RadioElementTableThis table is used to represent the radio element of fat AP and AC. SEQUENCE OF H3cDot11RadioElementEntry .1.3.6.1.4.1.43.45.1.10.2.75.12.1.2 |
h3cDot11RadioElementEntryEach entry contains information for each radio element. H3cDot11RadioElementEntry .1.3.6.1.4.1.43.45.1.10.2.75.12.1.2.1 |
h3cDot11RadioElementRadioNumThis object represents the number of the radio element. Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.75.12.1.2.1.1 |
h3cDot11RadioElementRadioPolicyThis object represents the radio policy of the radio element.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.75.12.1.2.1.2 |
h3cDot11RadioElementRadioIndexThis object represents the index of the radio element. On AC, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. On fat AP, the index stands for the interface index of radio interface.ro Unsigned32 .1.3.6.1.4.1.43.45.1.10.2.75.12.1.2.1.3 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.