A3COM-HUAWEI-DOMAIN-MIB
AI MIB Summary
The A3COM-HUAWEI-DOMAIN-MIB enables monitoring and configuration of logical domain entities, including domain membership, authentication status, and policy bindings, on Huawei and 3Com network devices. It facilitates the retrieval of domain-specific operational states and configuration parameters required for centralized access control and network segmentation management.
The MIB module is used for managing domain.
Main OID:
h3cDomain.1.3.6.1.4.1.43.45.1.10.2.46
38
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
h3cDomainThe MIB module is used for managing domain. MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.10.2.46 |
h3cDomainControl OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.46.1 |
h3cDomainDefaultSpecifies default domain on the equipment. Default value is 'system'.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.46.1.1 |
h3cDomainTables OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.2.46.2 |
h3cDomainInfoTableThe (conceptual) table listing the domains. SEQUENCE OF H3cDomainInfoEntry .1.3.6.1.4.1.43.45.1.10.2.46.2.1 |
h3cDomainInfoEntryAn entry (conceptual row) representing a domain. H3cDomainInfoEntry .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1 |
h3cDomainNameAn index uniquely identifies a domain. OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.1 |
h3cDomainStateThe state of the domain, which reflects whether the domain is active. Default value is active.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.2 |
h3cDomainMaxAccessNumThe maximum number which the domain allows to access. If the value is set to 0, the access limit will be disabled.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.3 |
h3cDomainVlanAssignModeThe vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan assignment mode. 3 (vlanlist) - VLAN-List Vlan assignment mode. The default value is integer.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.4 |
h3cDomainIdleCutEnableThe idle cut control. Setting this attribute to true, the connection will be cut when the flow is less than h3cDomainIdleCutMinFlow and lasts h3cDomainIdleCutMaxTime. Default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.5 |
h3cDomainIdleCutMaxTimeThe maximal time of idle-cut. The unit is minute. If the value of h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMaxTime is meaningless.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.6 |
h3cDomainIdleCutMinFlowThe minimal flow of idle-cut. The unit is byte. If the value of h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMinFlow is meaningless.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.7 |
h3cDomainMessengerEnableThe messenger service control. If set h3cDomainMessengerEnable to true, h3cDomainMessengerLimitTime and h3cDomainMessengerSpanTime must be set to valid values. Default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.8 |
h3cDomainMessengerLimitTimeThe messenger service limit time. The unit is minute. If the value of h3cDomainMessengerEnable is false, the value of h3cDomainMessengerLimitTime is meaningless.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.9 |
h3cDomainMessengerSpanTimeThe messenger service span time. The unit is minute. It must be a multiple of 5. If the value of h3cDomainMessengerEnable is false, the value of h3cDomainMessengerSpanTime is meaningless.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.10 |
h3cDomainSelfServiceEnableThe self service control. If set h3cDomainSelfServiceEnable to true, h3cDomainSelfServiceURL must be set to a valid value. Default value is FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.11 |
h3cDomainSelfServiceURLSelf-service URL(Uniform Resource Locator) of the domain.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.12 |
h3cDomainAccFailureActionDefines the action that authentication should be taken if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is reject.rw Enumeration .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.13 |
h3cDomainRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To destroy an existent row, the domain of the row MUST NOT be used by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.14 |
h3cDomainCurrentAccessNumThe current access number of the domain.ro Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.1.1.15 |
h3cDomainSchemeTableThe (conceptual) table listing schemes of all domains. SEQUENCE OF H3cDomainSchemeEntry .1.3.6.1.4.1.43.45.1.10.2.46.2.2 |
h3cDomainSchemeEntryAn entry (conceptual row) representing an IP pool of a domain H3cDomainSchemeEntry .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1 |
h3cDomainSchemeIndexThe scheme index of domain, which is an identifier of a domain scheme. Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.1 |
h3cDomainSchemeModeThe scheme mode of the domain. Setting h3cDomainSchemeMode to none(1) indicates the domain has none scheme. Setting h3cDomainSchemeMode to local(2) indicates the domain will use local-server as a scheme. Setting h3cDomainSchemeMode to radius(3) or tacacs(4) indicates the domain will use radius or tacacs scheme. If set h3cDomainSchemeMode to radius(3) or tacacs(4), h3cDomainAuthSchemeName and h3cDomainAcctSchemeName must be set to valid values. And if h3cDomainSchemeMode is set to none(1) or local(2), the value of h3cDomainAuthSchemeName and h3cDomainAcctSchemeName will be ignored.rw H3cModeOfDomainScheme .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.2 |
h3cDomainAuthSchemeNameThe authentication scheme name of domain. If h3cDomainSchemeMode is set to radius or tacacs, the h3cDomainAuthSchemeName must be configured with a valid value.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.3 |
h3cDomainAcctSchemeNameThe accounting scheme name of the domain. If h3cDomainSchemeMode is set to radius or tacacs, the h3cDomainAcctSchemeName must be configured with a valid value.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.4 |
h3cDomainSchemeRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and createAndGo, destroy operation. To create a new row, h3cDomainSchemeMode must be specified. To destroy an existent row, the scheme of the row MUST NOT be used by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.5 |
h3cDomainSchemeAAATypeService Type of the server.rw H3cAAATypeDomainScheme .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.6 |
h3cDomainSchemeAAANameThe scheme name of the domain, whether the scheme represents accounting, authentication or authorization references the object h3cDomainSchemeAAAType. The value of the object must be valid if the value of h3cDomainSchemeMode is radius or tacacs, the value of the object will be ignored if the value of h3cDomainSchemeMode is none or local. If the domain has no scheme, there will be a null string. If this object is supported, the objects h3cDomainAuthSchemeName and h3cDomainAcctSchemeName will be ignored.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.7 |
h3cDomainSchemeAccessModeThe access mode of the domain scheme.rw H3cAccessModeofDomainScheme .1.3.6.1.4.1.43.45.1.10.2.46.2.2.1.8 |
h3cDomainIpPoolTableThe (conceptual) table listing IP pools of all domains. SEQUENCE OF H3cDomainIpPoolEntry .1.3.6.1.4.1.43.45.1.10.2.46.2.3 |
h3cDomainIpPoolEntryAn entry (conceptual row) representing an IP pool of a domain. H3cDomainIpPoolEntry .1.3.6.1.4.1.43.45.1.10.2.46.2.3.1 |
h3cDomainIpPoolNumThe number of IP pool, which is an identifier of an IP pool. Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.3.1.1 |
h3cDomainIpPoolLowIpAddrTypeThe low IP addresses type (IPv4 or IPv6) of IP pool.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.46.2.3.1.2 |
h3cDomainIpPoolLowIpAddrThe low IP address of IP pool.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.43.45.1.10.2.46.2.3.1.3 |
h3cDomainIpPoolLenThe length of IP pool. Default value is 1.rw Integer32 .1.3.6.1.4.1.43.45.1.10.2.46.2.3.1.4 |
h3cDomainIpPoolRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To create a new row, h3cDomainIpPoolNum and h3cDomainIpPoolLowIpAddr must be specified. To destroy an existent row, the IP pool of this row MUST NOT be used by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.2.46.2.3.1.5 |
More MIBs from 3Com
Browse all 3ComMIBs →A3Com-products-MIB
Standard SNMP MIB module defining data structures for A3Com-products-MIB.
1546 objects→
A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
1462 objects→
A3COM-HUAWEI-CBQOS2-MIB
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
472 objects→
A3COM-HUAWEI-DOT11-APMT-MIB
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
472 objects→
A3COM-SWITCHING-SYSTEMS-MIB
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
425 objects→
A3COM-HUAWEI-EPON-MIB
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.
424 objects→