A3COM-HUAWEI-COMMON-MIB
Standard SNMP MIB module defining data structures for A3COM-HUAWEI-COMMON-MIB.
Imported Objects
Objects
22 total| Object Name |
|---|
hwWriteConfigWrite config to router.rw Enumeration .1.3.6.1.4.1.43.45.1.10.6.5 |
hwStartFtpServerDecide whether start ftp-server.enable(1) indicates to start ftp-server; disable(2) indicates to stop ftp-server.rw Enumeration .1.3.6.1.4.1.43.45.1.10.6.6 |
hwRebootReboot router.rw Enumeration .1.3.6.1.4.1.43.45.1.10.6.7 |
hwSystemNotification OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.6.8 |
hwWriteSuccessTrapsend a trap about write success. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.6.8.1 |
hwWriteFailureTrapsend a trap about write failure. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.6.8.2 |
hwRebootSendTrapWhen users restart the device with command 'reboot', this trap will be sent two seconds before the device reboots. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.6.8.3 |
hwSysColdStartTrapA system cold start trap. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.6.8.4 |
hwSysWarmStartTrapA system warm start trap. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.10.6.8.5 |
hwSoftwareVersionSoftware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.6.9 |
hwSysBootTypeThe boot type of the system whether the last device reboot was by CLI (warm start) or power off (cold start).ro Enumeration .1.3.6.1.4.1.43.45.1.10.6.10 |
hwSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.10.6.11 |
hwSysStatisticPeriodThe statistic period. The device collects statistics within the period.rw INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.1 |
hwSysSamplePeriodThe sampling period. The device takes samples periodically for statistics collection.rw INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.2 |
hwSysTrapResendPeriodThe trap resending period. If the value is zero, the trap will not be re-sent.rw INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.3 |
hwSysTrapCollectionPeriodThe trap collecting period. If the value is zero, the trap will not be re-sent.rw INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.4 |
hwSysSnmpPortUDP port for SNMP protocol entity to receive messages except Trap-PDU.ro INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.5 |
hwSysSnmpTrapPortUDP port for Trap-PDU to receive messages.ro INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.6 |
hwSysNetIDThe system Net ID.rw OCTET STRING .1.3.6.1.4.1.43.45.1.10.6.11.7 |
hwSysLastSampleTimeThe last sample local time of the system.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.10.6.11.8 |
hwSysTrapSendNumThe trap send times. If the value is zero, the trap will be sent all the time if it occurs.rw INTEGER .1.3.6.1.4.1.43.45.1.10.6.11.9 |
hwSysFirstTrapTimeRepresents the first trap time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.43.45.1.10.6.11.10 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.