A3COM-AUDL-r1-MIB
Standard SNMP MIB module defining data structures for A3COM-AUDL-r1-MIB.
Imported Objects
Objects
14 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1155-SMI Unknown .1.3.6.1.4.1.43 |
brouterMIB OBJECT IDENTIFIER .1.3.6.1.4.1.43.2 |
a3ComAuditLog OBJECT IDENTIFIER .1.3.6.1.4.1.43.2.29 |
a3ComAudlControl OBJECT IDENTIFIER .1.3.6.1.4.1.43.2.29.1 |
a3ComAudlControlAuditTrailThis parameter enables/disables the log message AuditTrail
category which logs the AuditTrail messages. A default
value of 2 means no AuditTrail.rw Enumeration .1.3.6.1.4.1.43.2.29.1.1 |
a3ComAudlControlConfigThis parameter enables/disables the log message COnfig
category which logs the SET/SETD/ADD/DELETE commands and
other commands such as SysPassWord, SU, Login, Listen etc.
The default value of 2 means no COnfig.rw Enumeration .1.3.6.1.4.1.43.2.29.1.2 |
a3ComAudlControlMessagesThis parameter enables/disables the log message MEssages
category which log System Message and Dial History. The
default value of 2 means no MEssages.rw Enumeration .1.3.6.1.4.1.43.2.29.1.3 |
a3ComAudlControlSecurityThis parameter enables/disables the log message SEcurity
category which logs faulted set privilege, failed login and
invalid community string. The default 2 means no SEcurity.rw Enumeration .1.3.6.1.4.1.43.2.29.1.4 |
a3ComAudlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.43.2.29.2 |
a3ComAudlLogServerAddrThis is the IP address of a log server which has syslog
daemon active with proper syslog configuration.rw IpAddress .1.3.6.1.4.1.43.2.29.2.1 |
a3ComAudlPriorityLevelThe level is used with facility to format a priority
which used as a tag in log message before sending it
to syslog daemon. It also controls the log sending
operation, a log message with higher Level will be
be sent together with what has been in Audit Log
buffer, to a LogServerAddr immediately.rw Enumeration .1.3.6.1.4.1.43.2.29.2.2 |
a3ComAudlMaxLogIt decides the maximum number of log commands/messages
could accumulate in Audit Log buffer before sending to
a LogServerAddr. Value 1 means send each log without
buffering.rw INTEGER .1.3.6.1.4.1.43.2.29.2.3 |
a3ComAudlIdleTimeThis controls the idle time in minute till sending
Audit log buffer if it has data. Value of 0 means
this idle time is disabled.rw INTEGER .1.3.6.1.4.1.43.2.29.2.4 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.